This document provides disassembly instructions for a piston motor (hydrostatic) on a 287C2 Multi Terrain Loader. It lists 42 steps to fully disassemble the piston motor and associated components. The steps include removing bolts, seals, springs, spools, plugs, valves, bearings, gears, and other parts using various specialized tools. Dismantling the piston motor exposes the internal workings for repair or replacement of worn parts.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
2. Shutdown SIS
Previous Screen
Product: MULTI TERRAIN LOADER
Model: 287C2 MULTI TERRAIN LOADER SSB
Configuration: 287C2 Multi Terrain Loader SSB00001-UP (MACHINE) POWERED BY C3.4 Engine
Disassembly and Assembly
279C2 Compact Track Loader and 287C, 277C, 277C2 and 297C
Multi Terrain Loaders Power Train
Media Number -KENR5197-07 Publication Date -01/06/2014 Date Updated -10/06/2014
i05926249
Piston Motor (Hydrostatic) - Disassemble - CTL
SMCS - 4351-015
S/N - SSB1-UP
Disassembly Procedure
Table 1
Required Tools
Tools Part Number Part Description Qty
A 1P-1861 Retaining Ring Pliers 1
B 136-1452 Retaining Ring Pliers As 1
C 1P-0074 Slide Hammer Puller Gp 1
D 5F-7339 Adapter 1
E 1P-1859 Retaining Ring Pliers 1
F 5P-5197 Retaining Ring Pliers As 1
G
308-5676 Spanner Wrench Assembly(1)
1
329-1669 Spanner Wrench Assembly(2)
1
308-5675 Driver Assembly 1
426-2723 Adapter 1
H
385-8578 Hydraulic Wrench 1
385-8589 Reaction Arm Assembly 1
426-2719 Block Assembly 1
1/14287C2 Multi Terrain Loader SSB00001-UP (MACHINE) POWERED BY C3.4 Engin...
2019/10/17https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. H
132-8126 Hydraulic Wrench(3)
1
237-3952 Reaction Arm Assembly(4)
1
426-2720 Block Assembly(5)
1
J 426-2717 Reaction Plate 1
K 8T-7338 Bolt 4
L 9X-8268 Washer 4
M
385-8479
Hydraulic Pump Gp
115v
1
384-8916
Hydraulic Pump Gp
208-240v
1
N 1H-3110 Bearing Puller Gp 1
(1)
6 Pin
(2)
7 Pin
(3)
Can be used in place of 385-8578 Hydraulic Wrench.
(4)
For use with 132-8126 Hydraulic Wrench only.
(5)
For use with 132-8126 Hydraulic Wrench only.
Start By:
a. Remove the piston motor.
Illustration 1 g01509813
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
2/14287C2 Multi Terrain Loader SSB00001-UP (MACHINE) POWERED BY C3.4 Engin...
2019/10/17https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Follow the recommended procedure and use all recommended tooling to
release the spring force.
1. Remove bolts (1) and head (2).
Illustration 2 g01510048
2. Remove bearing (3) and seal (4).
Illustration 3 g01510076
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
3/14287C2 Multi Terrain Loader SSB00001-UP (MACHINE) POWERED BY C3.4 Engin...
2019/10/17https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. 3. Remove plug (5).
Illustration 4 g01510154
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
4. Remove O-ring seal (8) from plug (5).
5. Remove spring (7) and spool (6).
6. Repeat Step 4 for opposite side.
Illustration 5 g01510333
7. Remove plug (12), O-ring seal (13), spring (11) and washer (10).
4/14287C2 Multi Terrain Loader SSB00001-UP (MACHINE) POWERED BY C3.4 Engin...
2019/10/17https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. 8. Remove spool (9).
9. Repeat Step 7 for opposite side.
Illustration 6 g01397331
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
10. Do not remove nut (12A).
11. Remove plug (12B), O-ring seal (12C), O-ring seal (12D), retainer (12E), spring (12F), and
valve (12G).
5/14287C2 Multi Terrain Loader SSB00001-UP (MACHINE) POWERED BY C3.4 Engin...
2019/10/17https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 7 g01511467
12. Remove O-ring seals (14) and (15). Remove springs (16) and port plate (17).
Illustration 8 g01512055
13. Remove bearing race (18) and piston assembly (19).
Illustration 9 g01513257
14. Remove piston assembly (19A).
6/14287C2 Multi Terrain Loader SSB00001-UP (MACHINE) POWERED BY C3.4 Engin...
2019/10/17https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 10 g01512054
15. Remove pins (20).
Illustration 11 g01512134
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
16. Use Tooling (A) and a suitable press in order to remove retaining ring (21) from barrel (19).
7/14287C2 Multi Terrain Loader SSB00001-UP (MACHINE) POWERED BY C3.4 Engin...
2019/10/17https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 12 g01512596
17. Remove washers (22) and spring (23) from barrel (19).
Illustration 13 g01513300
18. Apply low air to port hole (24) in order to remove piston assembly (25).
Illustration 14 g01513310
19. Remove O-ring seals (26) and (27) from piston assembly (25).
8/14287C2 Multi Terrain Loader SSB00001-UP (MACHINE) POWERED BY C3.4 Engin...
2019/10/17https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 15 g01513421
20. Remove collar (28), discs (29), and plates (30).
Illustration 16 g01513454
21. Remove O-ring seal (31) from collar (28).
Illustration 17 g01513473
22. Remove shaft (32) and swashplate (33).
9/14287C2 Multi Terrain Loader SSB00001-UP (MACHINE) POWERED BY C3.4 Engin...
2019/10/17https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 18 g01513577
23. Remove piston (34).
Illustration 19 g01513869
24. Remove balls (35) and springs (36).
25. Use a suitable press in order to remove bearing (37).
Illustration 20 g03353850
26. Use Tooling (B) in order to remove retaining ring (38).
27. Remove plug (39) and the O-ring seal.
10/14287C2 Multi Terrain Loader SSB00001-UP (MACHINE) POWERED BY C3.4 Eng...
2019/10/17https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 21 g01513925
28. Use Tooling (C) and Tooling (D) in order to remove cover (40).
Illustration 22 g01514083
29. Remove O-ring seal (41) and carrier assembly (42).
Illustration 23 g01515008
30. Use Tooling (E) in order to remove retaining rings (43).
31. Remove gears (44) and gear (45).
11/14287C2 Multi Terrain Loader SSB00001-UP (MACHINE) POWERED BY C3.4 Eng...
2019/10/17https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 24 g01515037
32. Use Tooling (F) in order to remove retaining ring (46).
33. Remove gear (47).
Illustration 25 g01515047
34. Use Tooling (E) in order to remove retaining rings (48).
35. Remove gears (49).
Illustration 26 g01515073
12/14287C2 Multi Terrain Loader SSB00001-UP (MACHINE) POWERED BY C3.4 Eng...
2019/10/17https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 27 g03337242
36. Drill the stakes from nut (50).
37. Install spindle (51) and housing (52) onto Tooling (J) using Tooling (K) and Tooling (L).
38. Install Tooling (G) into spindle (51).
39. Install Tooling (H) onto Tooling (J) and Tooling (G).
40. Use Tooling (H) and Tooling (M) (not shown) in order to remove nut (50).
Illustration 28 g03337267
41. Use Tooling (N) and a suitable press in order to remove spindle (51) from housing (52).
13/14287C2 Multi Terrain Loader SSB00001-UP (MACHINE) POWERED BY C3.4 Eng...
2019/10/17https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 29 g01515147
42. Remove Duo-Cone seals (53) and (54).
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Oct 17 15:33:20 UTC+0800 2019
14/14287C2 Multi Terrain Loader SSB00001-UP (MACHINE) POWERED BY C3.4 Eng...
2019/10/17https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Shutdown SIS
Previous Screen
Product: MULTI TERRAIN LOADER
Model: 287C2 MULTI TERRAIN LOADER SSB
Configuration: 287C2 Multi Terrain Loader SSB00001-UP (MACHINE) POWERED BY C3.4 Engine
Disassembly and Assembly
279C2 Compact Track Loader and 287C, 277C, 277C2 and 297C
Multi Terrain Loaders Power Train
Media Number -KENR5197-07 Publication Date -01/06/2014 Date Updated -10/06/2014
i05269920
Piston Motor (Hydrostatic) - Disassemble - Final Drive Bench
Method
SMCS - 4351-015
S/N - SSB1-UP
Disassembly Procedure
Table 1
Required Tools
Tools Part Number Part Description Qty
A 1P-1861 Retaining Ring Pliers 1
B 136-1452 Retaining Ring Pliers As 1
C 1P-0074 Slide Hammer Puller Gp 1
D 5F-7339 Adapter 1
E 1P-1859 Retaining Ring Pliers 1
F 5P-5197 Retaining Ring Pliers As 1
G FT-3081 Adapter Plate 1
H
308-5676 Spanner Wrench Assembly(1)
1
329-1669 Spanner Wrench Assembly(2)
1
308-5675 Driver Assembly 1
J 127-8458 Final Drive Bench Ar 1
K 1H-3110 Bearing Puller Gp 1
1/14287C2 Multi Terrain Loader SSB00001-UP (MACHINE) POWERED BY C3.4 Engin...
2019/10/17https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. (1)
6 Pin
(2)
7 Pin
Start By:
a. Remove the piston motor.
Illustration 1 g01509813
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
1. Remove bolts (1) and head (2).
Illustration 2 g01510048
2/14287C2 Multi Terrain Loader SSB00001-UP (MACHINE) POWERED BY C3.4 Engin...
2019/10/17https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. 2. Remove bearing (3) and seal (4).
Illustration 3 g01510076
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
3. Remove plug (5).
Illustration 4 g01510154
4. Remove O-ring seal (8) from plug (5).
5. Remove spring (7) and spool (6).
6. Repeat Step 4 for opposite side.
3/14287C2 Multi Terrain Loader SSB00001-UP (MACHINE) POWERED BY C3.4 Engin...
2019/10/17https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 5 g01510333
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
7. Remove plug (12), O-ring seal (13), spring (11) and washer (10).
8. Remove spool (9).
9. Repeat Step 7 for opposite side.
4/14287C2 Multi Terrain Loader SSB00001-UP (MACHINE) POWERED BY C3.4 Engin...
2019/10/17https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 6 g01397331
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
10. Do not remove nut (12A).
11. Remove plug (12B), O-ring seal (12C), O-ring seal (12D), retainer (12E), spring (12F), and
valve (12G).
5/14287C2 Multi Terrain Loader SSB00001-UP (MACHINE) POWERED BY C3.4 Engin...
2019/10/17https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
22. Illustration 7 g01511467
12. Remove O-ring seals (14) and (15). Remove springs (16) and port plate (17).
Illustration 8 g01512055
13. Remove bearing race (18) and piston assembly (19).
Illustration 9 g01513257
14. Remove piston assembly (19A).
6/14287C2 Multi Terrain Loader SSB00001-UP (MACHINE) POWERED BY C3.4 Engin...
2019/10/17https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 10 g01512054
15. Remove pins (20).
Illustration 11 g01512134
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
16. Use Tooling (A) and a suitable press in order to remove retaining ring (21) from barrel (19).
7/14287C2 Multi Terrain Loader SSB00001-UP (MACHINE) POWERED BY C3.4 Engin...
2019/10/17https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Illustration 12 g01512596
17. Remove washers (22) and spring (23) from barrel (19).
Illustration 13 g01513300
18. Apply low air to port hole (24) in order to remove piston assembly (25).
Illustration 14 g01513310
19. Remove O-ring seals (26) and (27) from piston assembly (25).
8/14287C2 Multi Terrain Loader SSB00001-UP (MACHINE) POWERED BY C3.4 Engin...
2019/10/17https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Illustration 15 g01513421
20. Remove collar (28), discs (29), and plates (30).
Illustration 16 g01513454
21. Remove O-ring seal (31) from collar (28).
Illustration 17 g01513473
22. Remove shaft (32) and swashplate (33).
9/14287C2 Multi Terrain Loader SSB00001-UP (MACHINE) POWERED BY C3.4 Engin...
2019/10/17https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Illustration 18 g01513577
23. Remove piston (34).
Illustration 19 g01513869
24. Remove balls (35) and springs (36).
25. Use a suitable press in order to remove bearing (37).
Illustration 20 g03353911
26. Use Tooling (B) in order to remove retaining ring (38).
27. Remove plug (39) and the O-ring seal.
10/14287C2 Multi Terrain Loader SSB00001-UP (MACHINE) POWERED BY C3.4 Eng...
2019/10/17https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...