This document provides instructions for disassembling and assembling the travel motor of a 336E L excavator. The disassembly process involves removing 27 individual parts from the travel motor in a specific order using various tools. The assembly process reverses the disassembly steps and provides lubrication and torque specifications for reinstalling the 27 parts back into the travel motor. Proper assembly is important as some components are spring loaded and can cause injury if not assembled correctly.
Caterpillar cat 336 e l excavator (prefix jrj) service repair manual (jrj0000...fjskekmdm
The document provides instructions for disassembling and assembling the travel motor of a 336E L excavator. It lists 27 steps for disassembly, removing components like the head, springs, brake piston, plates and discs. It then lists 28 steps for assembly, reinstalling these components in reverse order and noting proper lubrication and torque specifications. Tools required include an adapter, nuts, washers, eyebolt, retaining ring pliers, driver group, bearing puller group and Loctite.
Caterpillar cat 336 e l excavator (prefix jrj) service repair manual (jrj0000...fjsekqazxkdmmem
The document provides instructions for disassembling and assembling the travel motor of a 336E L excavator. Key steps include:
1) Removing the travel motor head and internal components like springs, seals, and plates.
2) Using various tools to disassemble further into individual parts like pistons, bearings, and shafts.
3) Cleaning and inspecting all parts before assembly.
4) Reassembling the travel motor in reverse order, replacing all seals, springs and ensuring proper alignment of parts.
Caterpillar cat 336 e ln excavator (prefix yce) service repair manual (yce000...fjsekdmmeed
1. The document provides instructions for disassembling and assembling the travel motor of a 336E L excavator.
2. The disassembly procedure involves removing 27 different parts from the travel motor in a specific order using various tools.
3. The assembly procedure instructs assembling the travel motor in the reverse order and notes to lubricate parts and align markings to ensure proper assembly.
Caterpillar cat 336 e ln excavator (prefix yce) service repair manual (yce000...kmf9ioseodk
This document provides the disassembly and assembly procedures for a 336E excavator travel motor. The disassembly procedure involves 27 steps to remove components like the head, springs, brake piston, plates, and seals. The assembly procedure reverses the disassembly steps and includes lubricating parts and ensuring proper alignment of components like the piston assemblies and cam plate. Tools required include an adapter, nuts, bolts, eyebolt, retaining ring pliers, bearing puller group, and loctite.
Caterpillar cat 336 e l excavator (prefix yce) service repair manual (yce0000...fjsekdmmeed
This document provides instructions for disassembling and assembling a 336E excavator travel motor. The disassembly procedure involves 27 steps to remove components like the motor head, springs, brake piston, rotating assembly, and seals. The assembly procedure describes 28 steps and requires various tools to reinstall the components in the reverse order of disassembly while ensuring proper alignment and torque specifications are followed. Precautions are provided to watch for spring forces and avoid damaging mating surfaces.
Caterpillar cat 336 e l excavator (prefix yce) service repair manual (yce0000...kmf9ioseodk
This document provides the disassembly and assembly procedures for a 336E excavator travel motor. The disassembly procedure involves 27 steps to remove components like the head, springs, brake piston, plates, and seals. The assembly procedure reverses the disassembly steps and includes lubricating components and ensuring proper alignment of parts like the cam plate keys. Special tools are required for tasks like removing races and installing seals. Proper torque values and cautions for spring-loaded parts are also noted.
This document provides instructions for disassembling and assembling a 336E excavator travel motor. The disassembly procedure involves 27 steps to remove components like the motor head, springs, brake piston, rotating assembly, and seals. The assembly procedure describes 28 steps and requires various tools to reinstall the components in the reverse order of disassembly while ensuring proper alignment and torque specifications are followed. Precautions are provided to watch for spring forces and avoid damaging mating surfaces.
Caterpillar cat 336 e l excavator (prefix dpx) service repair manual (dpx0000...fjskekmdm
This document provides instructions for disassembling and assembling a 336E L excavator travel motor. The disassembly procedure involves 27 steps to remove components like the head, O-rings, springs, brake piston, plates, and seals. The assembly procedure reverses the disassembly process in 21 steps and provides warnings about spring-loaded components and ensuring proper alignment of parts. Tools required include an adapter, nuts, washers, eyebolt, retaining ring pliers, driver group, bearing puller group, and Loctite.
Caterpillar cat 336 e l excavator (prefix jrj) service repair manual (jrj0000...fjskekmdm
The document provides instructions for disassembling and assembling the travel motor of a 336E L excavator. It lists 27 steps for disassembly, removing components like the head, springs, brake piston, plates and discs. It then lists 28 steps for assembly, reinstalling these components in reverse order and noting proper lubrication and torque specifications. Tools required include an adapter, nuts, washers, eyebolt, retaining ring pliers, driver group, bearing puller group and Loctite.
Caterpillar cat 336 e l excavator (prefix jrj) service repair manual (jrj0000...fjsekqazxkdmmem
The document provides instructions for disassembling and assembling the travel motor of a 336E L excavator. Key steps include:
1) Removing the travel motor head and internal components like springs, seals, and plates.
2) Using various tools to disassemble further into individual parts like pistons, bearings, and shafts.
3) Cleaning and inspecting all parts before assembly.
4) Reassembling the travel motor in reverse order, replacing all seals, springs and ensuring proper alignment of parts.
Caterpillar cat 336 e ln excavator (prefix yce) service repair manual (yce000...fjsekdmmeed
1. The document provides instructions for disassembling and assembling the travel motor of a 336E L excavator.
2. The disassembly procedure involves removing 27 different parts from the travel motor in a specific order using various tools.
3. The assembly procedure instructs assembling the travel motor in the reverse order and notes to lubricate parts and align markings to ensure proper assembly.
Caterpillar cat 336 e ln excavator (prefix yce) service repair manual (yce000...kmf9ioseodk
This document provides the disassembly and assembly procedures for a 336E excavator travel motor. The disassembly procedure involves 27 steps to remove components like the head, springs, brake piston, plates, and seals. The assembly procedure reverses the disassembly steps and includes lubricating parts and ensuring proper alignment of components like the piston assemblies and cam plate. Tools required include an adapter, nuts, bolts, eyebolt, retaining ring pliers, bearing puller group, and loctite.
Caterpillar cat 336 e l excavator (prefix yce) service repair manual (yce0000...fjsekdmmeed
This document provides instructions for disassembling and assembling a 336E excavator travel motor. The disassembly procedure involves 27 steps to remove components like the motor head, springs, brake piston, rotating assembly, and seals. The assembly procedure describes 28 steps and requires various tools to reinstall the components in the reverse order of disassembly while ensuring proper alignment and torque specifications are followed. Precautions are provided to watch for spring forces and avoid damaging mating surfaces.
Caterpillar cat 336 e l excavator (prefix yce) service repair manual (yce0000...kmf9ioseodk
This document provides the disassembly and assembly procedures for a 336E excavator travel motor. The disassembly procedure involves 27 steps to remove components like the head, springs, brake piston, plates, and seals. The assembly procedure reverses the disassembly steps and includes lubricating components and ensuring proper alignment of parts like the cam plate keys. Special tools are required for tasks like removing races and installing seals. Proper torque values and cautions for spring-loaded parts are also noted.
This document provides instructions for disassembling and assembling a 336E excavator travel motor. The disassembly procedure involves 27 steps to remove components like the motor head, springs, brake piston, rotating assembly, and seals. The assembly procedure describes 28 steps and requires various tools to reinstall the components in the reverse order of disassembly while ensuring proper alignment and torque specifications are followed. Precautions are provided to watch for spring forces and avoid damaging mating surfaces.
Caterpillar cat 336 e l excavator (prefix dpx) service repair manual (dpx0000...fjskekmdm
This document provides instructions for disassembling and assembling a 336E L excavator travel motor. The disassembly procedure involves 27 steps to remove components like the head, O-rings, springs, brake piston, plates, and seals. The assembly procedure reverses the disassembly process in 21 steps and provides warnings about spring-loaded components and ensuring proper alignment of parts. Tools required include an adapter, nuts, washers, eyebolt, retaining ring pliers, driver group, bearing puller group, and Loctite.
Caterpillar cat 336 e l excavator (prefix dpx) service repair manual (dpx0000...fjsekqazxkdmmem
This document provides instructions for disassembling and assembling a 336E L excavator travel motor. The disassembly procedure involves 27 steps to remove components like the head, O-rings, springs, brake piston, plates, and seals. The assembly procedure reverses the disassembly process in 21 steps and provides warnings about spring-loaded components and ensuring proper alignment of parts. Tools required include an adapter, nuts, washers, eyebolt, retaining ring pliers, driver group, bearing puller group, and Loctite.
Caterpillar Cat 336E L Excavator (Prefix DPX) Service Repair Manual Instant D...fskekkdmdmdm3e
This document provides instructions for disassembling and assembling the travel motor on a 336E L excavator. The disassembly process involves removing 27 individual parts from the travel motor in a specific sequence using various tools. The assembly process reverses the disassembly steps and provides additional details on lubricating parts and ensuring proper alignment of components.
Caterpillar Cat 336E L Excavator (Prefix DPX) Service Repair Manual Instant D...fijsekkdmdm2w
This document provides instructions for disassembling and assembling a 336E L excavator travel motor. The disassembly procedure involves removing 27 components of the travel motor including the head, springs, brake piston, plates, seals and bearings. The assembly procedure instructs installing 35 components in reverse order and includes notes about lubrication, alignment marks and torque specifications. Tools required include an adapter, nuts, washers, threaded rod, bolts, eyebolts, retaining ring pliers, bearing puller group and Loctite.
Caterpillar Cat 336E L Excavator (Prefix DPX) Service Repair Manual (DPX00001...f8uesjdkdmdm
This document provides instructions for disassembling and assembling the travel motor on a 336E L excavator. The disassembly procedure involves removing 27 individual parts from the travel motor in a specific sequence using various tools. The assembly procedure instructs assembling the travel motor in the reverse order and notes to lubricate parts and ensure proper alignment of components. Special care must be taken when handling springs or parts under spring force to avoid injury.
Caterpillar cat 336 e l excavator (prefix dpx) service repair manual (dpx0000...hfhjskedme
This document provides instructions for disassembling and assembling a 336E L excavator travel motor. The disassembly procedure involves removing 27 components of the travel motor including the head, springs, brake piston, plates, seals and bearings. The assembly procedure instructs installing 35 components in reverse order and includes notes about lubrication, alignment marks and torque specifications. Tools required include an adapter, nuts, washers, threaded rod, bolts, eyebolts, retaining ring pliers, bearing puller group and Loctite.
Caterpillar Cat 336E L Excavator (Prefix DPX) Service Repair Manual (DPX00001...f8sejdkdmdijd
This document provides instructions for disassembling and assembling the travel motor on a 336E L excavator. The disassembly process involves removing 27 individual parts from the travel motor in a specific sequence using various tools. The assembly process reverses the disassembly steps and provides additional details on lubricating parts and ensuring proper alignment of components.
Caterpillar cat 336 e l excavator (prefix dpx) service repair manual (dpx0000...fjkkekmdm
This document provides instructions for disassembling and assembling a 336E L excavator travel motor. The disassembly procedure involves removing 27 components of the travel motor including the head, springs, brake piston, plates, seals and bearings. The assembly procedure instructs installing 35 components in reverse order and includes notes about lubrication, alignment marks and torque specifications. Tools required include an adapter, nuts, washers, threaded rod, bolts, eyebolts, retaining ring pliers, bearing puller group and Loctite.
Caterpillar Cat 336E L Excavator (Prefix DPX) Service Repair Manual Instant D...fujkskemdmdm4r
This document provides instructions for disassembling and assembling the travel motor on a 336E L excavator. The disassembly process involves removing 27 individual parts from the travel motor in a specific sequence using various tools. The assembly process reverses the disassembly steps and provides lubrication and torque specifications for reinstalling the 27 parts back into the travel motor. Proper assembly is important as some components are spring loaded and can cause injury if not assembled correctly.
Caterpillar Cat 336E L Excavator (Prefix DPX) Service Repair Manual (DPX00001...yqen95561858
This document provides instructions for disassembling and assembling the travel motor on a 336E L excavator. The disassembly process involves removing 27 individual parts from the travel motor in a specific sequence using various tools. The assembly process reverses the disassembly steps and provides additional details on lubricating parts and ensuring proper alignment of components.
Caterpillar Cat 336E L Excavator (Prefix DPX) Service Repair Manual Instant D...ze3xiandiao
This document provides instructions for disassembling and assembling the travel motor on a 336E L excavator. The disassembly process involves removing 27 individual parts from the travel motor in a specific sequence using various tools. The assembly process reverses the disassembly steps and provides additional details on lubricating parts and ensuring proper alignment of components.
Caterpillar Cat 336E L Excavator (Prefix DPX) Service Repair Manual (DPX00001...f7usuejkdkddm3
This document provides instructions for disassembling and assembling the travel motor on a 336E L excavator. The disassembly process involves removing 27 individual parts from the travel motor in a specific sequence using various tools. The assembly process reverses the disassembly steps and provides additional details on lubricating parts and ensuring proper alignment of components.
Caterpillar cat 336 e l excavator (prefix dpx) service repair manual (dpx0000...jfskemsemm
This document provides instructions for disassembling and assembling the travel motor on a 336E L excavator. The disassembly process involves removing 27 individual parts from the travel motor in a specific sequence using various tools. The assembly process reverses the disassembly steps and provides additional details on lubricating parts and ensuring proper alignment of components.
Caterpillar Cat 336E L Excavator (Prefix DPX) Service Repair Manual (DPX00001...ufs89eodkdmdm
This document provides instructions for disassembling and assembling the travel motor on a 336E L excavator. The disassembly process involves removing 27 individual parts from the travel motor in a specific sequence using various tools. The assembly process reverses the disassembly steps and provides additional details on lubricating parts and ensuring proper alignment of components.
Caterpillar Cat 336E L Excavator (Prefix DPX) Service Repair Manual (DPX00001...jdkskmmdmd1
This document provides instructions for disassembling and assembling the travel motor on a 336E L excavator. The disassembly process involves removing 27 individual parts from the travel motor in a specific sequence using various tools. The assembly process reverses the disassembly steps and provides additional details on lubricating parts and ensuring proper alignment of components.
Caterpillar Cat 336E L Excavator (Prefix DPX) Service Repair Manual (DPX00001...jdkskmdmdm
This document provides instructions for disassembling and assembling the travel motor on a 336E L excavator. The disassembly process involves removing 27 individual parts from the travel motor in a specific sequence using various tools. The assembly process reverses the disassembly steps and provides additional details on lubricating parts and ensuring proper alignment of components.
The document provides instructions for disassembling and assembling a swivel and swing motor on an excavator. Key steps include:
1. Removing bolts, seals and components to separate the swivel housing, rotor and cover.
2. Applying clean oil before reassembling components and installing seals, retainer and cover.
3. Draining swing motor oil before disconnecting hoses and removing bolts to detach the motor.
4. Dismantling the swing motor involves removing valves, seals, springs and using tools to separate individual parts like pistons, plates and barrels.
Caterpillar Cat 336D2 and 336D2 L Excavator (Prefix YCF) Service Repair Manua...fskekkdmdmdm3e
The document provides instructions for disassembling and assembling a piston pump. It outlines 30 steps for assembly, beginning with installing various bearings, seals, pistons, springs and other components in the proper order. Disassembly instructions describe 8 steps, including removing the head, port plate, bearings, pistons, pins and other parts. Safety warnings are provided to prevent injury from spring forces.
Caterpillar Cat 312D L Excavator (Prefix XGK) Service Repair Manual Instant D...fskekkdmdmdm3e
- The document provides instructions for removing and installing the idler gear of the front gear group on a C4.2 engine for Caterpillar built machines.
- To remove the idler gear, the front housing must first be removed. Then the idler gear bolt, thrust plate, and idler gear can be taken off the idler gear shaft. An idler shaft puller and driver group may be needed.
- To install the idler gear, first press in a new bushing if needed. Then install the idler shaft, idler gear, thrust plate, washer and idler gear bolt. Tighten the bolt to the specified torque.
Caterpillar Cat 336D L Excavator (Prefix J6D) Service Repair Manual Instant D...fskekkdmdmdm3e
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The 25 step disassembly process removes components like housing, gears, seals and bearings. The 22 step assembly process reverses this to rebuild the final drive, applying loctite and torquing bolts to specification. Tools required include link brackets, crossblocks, drivers and torque wrenches. Safety precautions are noted for releasing spring forces.
Caterpillar Cat 336F and 336F L Excavator (Prefix DSW) Service Repair Manual ...fskekkdmdmdm3e
This document provides instructions for disassembling the travel motor on 336F and 336F L excavator models. The 27-step procedure includes removing components like the motor head assembly, piston assemblies, barrel assembly, springs and seals. Tools required include a transmission repair stand, lifting eye assembly, driver group and various bolts, pins and seals. Technicians are advised to mark components for reinstallation and take care when removing parts to avoid damage.
Caterpillar Cat 336D2 and 336D2 L Excavator (Prefix XBH) Service Repair Manua...fskekkdmdmdm3e
The document provides instructions for installing a swivel on an excavator. It describes using lifting devices and tools to position the swivel. O-rings and seals are installed on the swivel housing and rotor before assembling them together. Bolts are used to secure the parts and the swivel is tested for leaks by applying air pressure. Finally, hoses and fittings are reconnected to complete the installation.
Caterpillar Cat 345D L Excavator (Prefix JKN) Service Repair Manual Instant D...fskekkdmdmdm3e
This document provides instructions for installing a travel motor on an excavator. It lists the required tools and parts. The procedure has 33 steps that include installing seals, spacers, pistons, plates, bearings and other components into the travel motor housing and barrel. Measurements are taken throughout to ensure proper assembly. The travel motor is then installed on the excavator and filled with the correct oil type.
More Related Content
Similar to Caterpillar Cat 336E L Excavator (Prefix JRJ) Service Repair Manual Instant Download.pdf
Caterpillar cat 336 e l excavator (prefix dpx) service repair manual (dpx0000...fjsekqazxkdmmem
This document provides instructions for disassembling and assembling a 336E L excavator travel motor. The disassembly procedure involves 27 steps to remove components like the head, O-rings, springs, brake piston, plates, and seals. The assembly procedure reverses the disassembly process in 21 steps and provides warnings about spring-loaded components and ensuring proper alignment of parts. Tools required include an adapter, nuts, washers, eyebolt, retaining ring pliers, driver group, bearing puller group, and Loctite.
Caterpillar Cat 336E L Excavator (Prefix DPX) Service Repair Manual Instant D...fskekkdmdmdm3e
This document provides instructions for disassembling and assembling the travel motor on a 336E L excavator. The disassembly process involves removing 27 individual parts from the travel motor in a specific sequence using various tools. The assembly process reverses the disassembly steps and provides additional details on lubricating parts and ensuring proper alignment of components.
Caterpillar Cat 336E L Excavator (Prefix DPX) Service Repair Manual Instant D...fijsekkdmdm2w
This document provides instructions for disassembling and assembling a 336E L excavator travel motor. The disassembly procedure involves removing 27 components of the travel motor including the head, springs, brake piston, plates, seals and bearings. The assembly procedure instructs installing 35 components in reverse order and includes notes about lubrication, alignment marks and torque specifications. Tools required include an adapter, nuts, washers, threaded rod, bolts, eyebolts, retaining ring pliers, bearing puller group and Loctite.
Caterpillar Cat 336E L Excavator (Prefix DPX) Service Repair Manual (DPX00001...f8uesjdkdmdm
This document provides instructions for disassembling and assembling the travel motor on a 336E L excavator. The disassembly procedure involves removing 27 individual parts from the travel motor in a specific sequence using various tools. The assembly procedure instructs assembling the travel motor in the reverse order and notes to lubricate parts and ensure proper alignment of components. Special care must be taken when handling springs or parts under spring force to avoid injury.
Caterpillar cat 336 e l excavator (prefix dpx) service repair manual (dpx0000...hfhjskedme
This document provides instructions for disassembling and assembling a 336E L excavator travel motor. The disassembly procedure involves removing 27 components of the travel motor including the head, springs, brake piston, plates, seals and bearings. The assembly procedure instructs installing 35 components in reverse order and includes notes about lubrication, alignment marks and torque specifications. Tools required include an adapter, nuts, washers, threaded rod, bolts, eyebolts, retaining ring pliers, bearing puller group and Loctite.
Caterpillar Cat 336E L Excavator (Prefix DPX) Service Repair Manual (DPX00001...f8sejdkdmdijd
This document provides instructions for disassembling and assembling the travel motor on a 336E L excavator. The disassembly process involves removing 27 individual parts from the travel motor in a specific sequence using various tools. The assembly process reverses the disassembly steps and provides additional details on lubricating parts and ensuring proper alignment of components.
Caterpillar cat 336 e l excavator (prefix dpx) service repair manual (dpx0000...fjkkekmdm
This document provides instructions for disassembling and assembling a 336E L excavator travel motor. The disassembly procedure involves removing 27 components of the travel motor including the head, springs, brake piston, plates, seals and bearings. The assembly procedure instructs installing 35 components in reverse order and includes notes about lubrication, alignment marks and torque specifications. Tools required include an adapter, nuts, washers, threaded rod, bolts, eyebolts, retaining ring pliers, bearing puller group and Loctite.
Caterpillar Cat 336E L Excavator (Prefix DPX) Service Repair Manual Instant D...fujkskemdmdm4r
This document provides instructions for disassembling and assembling the travel motor on a 336E L excavator. The disassembly process involves removing 27 individual parts from the travel motor in a specific sequence using various tools. The assembly process reverses the disassembly steps and provides lubrication and torque specifications for reinstalling the 27 parts back into the travel motor. Proper assembly is important as some components are spring loaded and can cause injury if not assembled correctly.
Caterpillar Cat 336E L Excavator (Prefix DPX) Service Repair Manual (DPX00001...yqen95561858
This document provides instructions for disassembling and assembling the travel motor on a 336E L excavator. The disassembly process involves removing 27 individual parts from the travel motor in a specific sequence using various tools. The assembly process reverses the disassembly steps and provides additional details on lubricating parts and ensuring proper alignment of components.
Caterpillar Cat 336E L Excavator (Prefix DPX) Service Repair Manual Instant D...ze3xiandiao
This document provides instructions for disassembling and assembling the travel motor on a 336E L excavator. The disassembly process involves removing 27 individual parts from the travel motor in a specific sequence using various tools. The assembly process reverses the disassembly steps and provides additional details on lubricating parts and ensuring proper alignment of components.
Caterpillar Cat 336E L Excavator (Prefix DPX) Service Repair Manual (DPX00001...f7usuejkdkddm3
This document provides instructions for disassembling and assembling the travel motor on a 336E L excavator. The disassembly process involves removing 27 individual parts from the travel motor in a specific sequence using various tools. The assembly process reverses the disassembly steps and provides additional details on lubricating parts and ensuring proper alignment of components.
Caterpillar cat 336 e l excavator (prefix dpx) service repair manual (dpx0000...jfskemsemm
This document provides instructions for disassembling and assembling the travel motor on a 336E L excavator. The disassembly process involves removing 27 individual parts from the travel motor in a specific sequence using various tools. The assembly process reverses the disassembly steps and provides additional details on lubricating parts and ensuring proper alignment of components.
Caterpillar Cat 336E L Excavator (Prefix DPX) Service Repair Manual (DPX00001...ufs89eodkdmdm
This document provides instructions for disassembling and assembling the travel motor on a 336E L excavator. The disassembly process involves removing 27 individual parts from the travel motor in a specific sequence using various tools. The assembly process reverses the disassembly steps and provides additional details on lubricating parts and ensuring proper alignment of components.
Caterpillar Cat 336E L Excavator (Prefix DPX) Service Repair Manual (DPX00001...jdkskmmdmd1
This document provides instructions for disassembling and assembling the travel motor on a 336E L excavator. The disassembly process involves removing 27 individual parts from the travel motor in a specific sequence using various tools. The assembly process reverses the disassembly steps and provides additional details on lubricating parts and ensuring proper alignment of components.
Caterpillar Cat 336E L Excavator (Prefix DPX) Service Repair Manual (DPX00001...jdkskmdmdm
This document provides instructions for disassembling and assembling the travel motor on a 336E L excavator. The disassembly process involves removing 27 individual parts from the travel motor in a specific sequence using various tools. The assembly process reverses the disassembly steps and provides additional details on lubricating parts and ensuring proper alignment of components.
Similar to Caterpillar Cat 336E L Excavator (Prefix JRJ) Service Repair Manual Instant Download.pdf (15)
The document provides instructions for disassembling and assembling a swivel and swing motor on an excavator. Key steps include:
1. Removing bolts, seals and components to separate the swivel housing, rotor and cover.
2. Applying clean oil before reassembling components and installing seals, retainer and cover.
3. Draining swing motor oil before disconnecting hoses and removing bolts to detach the motor.
4. Dismantling the swing motor involves removing valves, seals, springs and using tools to separate individual parts like pistons, plates and barrels.
Caterpillar Cat 336D2 and 336D2 L Excavator (Prefix YCF) Service Repair Manua...fskekkdmdmdm3e
The document provides instructions for disassembling and assembling a piston pump. It outlines 30 steps for assembly, beginning with installing various bearings, seals, pistons, springs and other components in the proper order. Disassembly instructions describe 8 steps, including removing the head, port plate, bearings, pistons, pins and other parts. Safety warnings are provided to prevent injury from spring forces.
Caterpillar Cat 312D L Excavator (Prefix XGK) Service Repair Manual Instant D...fskekkdmdmdm3e
- The document provides instructions for removing and installing the idler gear of the front gear group on a C4.2 engine for Caterpillar built machines.
- To remove the idler gear, the front housing must first be removed. Then the idler gear bolt, thrust plate, and idler gear can be taken off the idler gear shaft. An idler shaft puller and driver group may be needed.
- To install the idler gear, first press in a new bushing if needed. Then install the idler shaft, idler gear, thrust plate, washer and idler gear bolt. Tighten the bolt to the specified torque.
Caterpillar Cat 336D L Excavator (Prefix J6D) Service Repair Manual Instant D...fskekkdmdmdm3e
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The 25 step disassembly process removes components like housing, gears, seals and bearings. The 22 step assembly process reverses this to rebuild the final drive, applying loctite and torquing bolts to specification. Tools required include link brackets, crossblocks, drivers and torque wrenches. Safety precautions are noted for releasing spring forces.
Caterpillar Cat 336F and 336F L Excavator (Prefix DSW) Service Repair Manual ...fskekkdmdmdm3e
This document provides instructions for disassembling the travel motor on 336F and 336F L excavator models. The 27-step procedure includes removing components like the motor head assembly, piston assemblies, barrel assembly, springs and seals. Tools required include a transmission repair stand, lifting eye assembly, driver group and various bolts, pins and seals. Technicians are advised to mark components for reinstallation and take care when removing parts to avoid damage.
Caterpillar Cat 336D2 and 336D2 L Excavator (Prefix XBH) Service Repair Manua...fskekkdmdmdm3e
The document provides instructions for installing a swivel on an excavator. It describes using lifting devices and tools to position the swivel. O-rings and seals are installed on the swivel housing and rotor before assembling them together. Bolts are used to secure the parts and the swivel is tested for leaks by applying air pressure. Finally, hoses and fittings are reconnected to complete the installation.
Caterpillar Cat 345D L Excavator (Prefix JKN) Service Repair Manual Instant D...fskekkdmdmdm3e
This document provides instructions for installing a travel motor on an excavator. It lists the required tools and parts. The procedure has 33 steps that include installing seals, spacers, pistons, plates, bearings and other components into the travel motor housing and barrel. Measurements are taken throughout to ensure proper assembly. The travel motor is then installed on the excavator and filled with the correct oil type.
Caterpillar Cat 336E L Excavator (Prefix FJH) Service Repair Manual Instant D...fskekkdmdmdm3e
The document provides instructions for disassembling and assembling a travel motor. It details 27 steps for assembling the travel motor that include installing seals, springs, pistons, and other components in the proper order and orientation. Thirteen steps are listed for disassembling the final drive, which include removing the cover, gears, and planetary gear assembly. Personal injury warnings are provided and all components must be cleaned before assembly.
Caterpillar Cat 336E L Excavator (Prefix BZY) Service Repair Manual Instant D...fskekkdmdmdm3e
This document provides instructions for disassembling and assembling the travel motor of a 336E L excavator. The disassembly procedure involves removing 27 individual parts from the travel motor in a specific sequence using various tools. The assembly procedure instructs assembling the travel motor in the reverse order, noting proper lubrication and torque specifications for reinstalling parts. Special care must be taken when handling springs or parts under spring force to avoid injury.
Caterpillar Cat 330F and 330F L Excavator (Prefix LCG) Service Repair Manual ...fskekkdmdmdm3e
This document provides instructions for disassembling and assembling a final drive on an excavator model 330F. It describes 37 steps to disassemble the final drive by removing gears, shafts, housings, seals and other components. It then describes 34 steps to reassemble the final drive, including pressing in new bearings, installing seals, adjusting bearing preload with shims, and applying threadlocker to bolts. Precise tools and lifting devices are required due to the heavy weights of up to 550 kg involved.
Caterpillar Cat 336D2 L Excavator (Prefix GJA) Service Repair Manual Instant ...fskekkdmdmdm3e
1) The document provides step-by-step instructions for disassembling the travel motor of a 336D2L excavator.
2) It describes removing over 30 components of the travel motor including the motor head assembly, piston assemblies, barrel assembly, springs, seals, plates and more.
3) Detailed illustrations are provided to accompany each step showing how to remove each component using the recommended tools.
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...fskekkdmdmdm3e
The document provides instructions for removing and installing the final drive and travel motor on a 336D L excavator. It describes 13 steps to remove the component, which include disconnecting hoses, removing bolts and brackets, and lifting the final drive and travel motor assembly out. 11 steps are listed to install the component, in reverse order, including attaching lifting devices, positioning the assembly, and reinstalling hoses and covers. Tools and torque specifications are provided.
Caterpillar Cat 325C and 325C L Excavator (Prefix JLD) Service Repair Manual ...fskekkdmdmdm3e
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and install components like gears, carriers, seals, and housings. Cleanliness is emphasized and O-rings, gaskets, and seals should always be replaced. The assembly procedure is the reverse of the disassembly with notes to apply lubricants and check parts for wear.
Caterpillar Cat 325C and 325C L Excavator (Prefix JLC) Service Repair Manual ...fskekkdmdmdm3e
The document provides instructions for removing and installing a crankshaft wear sleeve and crankshaft gear on a 325C excavator. It describes using various tools to distort and remove the existing wear sleeve and instructions for installing a new sleeve using a multi-piece installer tool. It also outlines steps for removing the crankshaft gear using a bearing puller and installing the gear by heating it and pressing it onto the crankshaft. The document provides maintenance technicians with detailed parts and tool information as well as safety notices for completing these tasks.
Caterpillar Cat 345D L Excavator (Prefix MLK) Service Repair Manual Instant D...fskekkdmdmdm3e
This document provides instructions for assembling and installing a travel motor. It outlines 34 steps for assembling components like pistons, seals, plates, and bearings. It also describes using tools to measure clearances and distances during assembly. Finally, it details installing the assembled travel motor using lifting devices and bolts, and connecting hydraulic hose assemblies.
Caterpillar Cat 345D L Excavator (Prefix KFH) Service Repair Manual Instant D...fskekkdmdmdm3e
This document provides instructions for removing and installing the rear gear group and rear crankshaft seal of a C13 engine. The removal procedure involves 11 steps including removing bolts, gears, seals, and bearings. The installation procedure involves 12 steps including cleaning parts, installing bearings, seals, gears, and bolts while ensuring proper dimensions and torque specifications are followed. Tools required include drivers, link brackets, guide studs, and installation tools.
This document provides instructions for removing and installing a camshaft on a Caterpillar 3306B engine. It describes:
1) Marking the gears to ensure proper timing during removal and installation.
2) Removing the camshaft bolts and carefully removing the camshaft.
3) Cleaning and lubricating the camshaft lobes and bearings before installation.
4) Aligning the timing marks and installing the camshaft bolts to complete the process.
The document provides instructions for removing and installing various components of a Caterpillar 621E wheel scraper, including:
1) Removing and installing the push-pull plate that connects the push-pull spring to the support assembly.
2) Disassembling and assembling the push-pull spring itself by removing discs and plates.
3) A detailed process for removing and installing the ejector cylinder, which requires the use of lifting tools and wood blocks due to the cylinder's weight.
4) Brief instructions for removing and adjusting the position of the lower front and guide rollers on the ejector assembly.
This document provides assembly instructions for a final drive on an excavator. It involves assembling and installing several components in the following order: installing bearings and determining shim thickness; installing seals; installing dowel pins; installing the housing on the motor housing; installing coupling gear, bolts, and ring gear; assembling carrier assemblies; installing gears, shafts, and retaining rings; installing the cover and testing for leaks. The process requires precision measurements and uses several specialized tools to properly assemble the final drive.
The document provides instructions to remove and install an engine balancer shaft. Key steps include:
1. Remove the flywheel housing and timing gear cover.
2. Use a puller tool to remove the balancer shaft gear from the shaft.
3. Remove bolts securing the balancer shaft and carefully withdraw the shaft from the engine block. Apply lubricant to the shaft before reinstalling and align timing marks.
car rentals in nassau bahamas | atv rental nassau bahamasjustinwilson0857
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336E L EXCAVATOR JRJ
Configuration: 336E L Excavators JRJ00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Media Number -KENR8157-05 Publication Date -01/06/2014 Date Updated -12/06/2014
i03863290
Travel Motor - Disassemble
SMCS - 4351-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- M12 x 1.75 by 250 mm (10 inch) Threaded Rod 1
B
8T-0651 Bolt 1
8T-4167 Hard Washer 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
Start By:
a. Remove the travel motor.
1. Fasten the travel motor in Tooling (A) in a vertical position. The weight of the travel motor
is approximately 60 kg (132 lb).
1/10
336E L Excavators JRJ00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP56...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. 2. Put an alignment mark across the head and the body of the travel motor for assembly
purposes. The head must be reinstalled in the head's original position on the body of the
travel motor.
Illustration 1 g00887295
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
Note: During the removal of head (2) from the travel motor, be careful not to damage the
mating surfaces of the components.
3. Remove bolts (1).
4. Remove head (2) from the body of the travel motor.
2/10
336E L Excavators JRJ00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP56...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 2 g00887302
5. Remove O-ring seal (3), port plate (4), and bearing (5).
Illustration 3 g00887311
6. Remove O-ring seals (6). Remove springs (7).
Illustration 4 g00887331
Illustration 5 g00890074
This is an example of the use of Tooling (B).
3/10
336E L Excavators JRJ00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP56...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. 7. Place a shop towel over brake piston (8). Retain brake piston (8) with Tooling (B). Apply
approximately 525 kPa (75 psi) of shop air pressure to brake release Port (Y). Make sure
that the shop air pressure is free of water. Brake piston (8) will move up the piston guide,
and out of the piston guide. Remove brake piston (8) from the body of the travel motor.
Illustration 6 g00887336
8. Remove seal (9) and backup ring (10) from the brake piston.
9. Remove seal (11) and backup ring (12) from the brake piston.
Illustration 7 g00887355
10. Remove plates (13) and friction discs (14).
4/10
336E L Excavators JRJ00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP56...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 8 g02107957
Illustration 9 g00887405
Illustration 10 g00887424
11. Install Tooling (C) into shaft (15). Use a prybar to remove the rotating assembly (16) from
the housing.
12. Remove Tooling (C) from shaft (15).
13. Remove shaft (15) from rotating assembly (16).
Illustration 11 g00887426
5/10
336E L Excavators JRJ00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP56...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. 14. Use Tooling (D) in order to remove retaining ring (17) from shaft (15).
Illustration 12 g00887445
15. Use a suitable press in order to remove bearing race (18) from shaft (15).
Illustration 13 g00887463
16. Rotate shaft (15). Use a suitable press and tooling (E) in order to remove bearing race (19)
from shaft (15).
Illustration 14 g00887501
17. Remove cam plate (20) from barrel assembly (21).
6/10
336E L Excavators JRJ00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP56...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 15 g00887520
18. Remove piston assemblies and retainer plate (22) from barrel assembly (21).
Note: Place marks on the pistons and the barrel assembly. The pistons must be returned to
the original position.
Illustration 16 g00887558
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
19. Remove ball (23) and springs (24).
7/10
336E L Excavators JRJ00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP56...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 17 g02107975
20. Remove bearing (25).
21. Remove keys (26) and locating pins (not shown) from the body of the travel motor.
Illustration 18 g00887589
22. Rotate the housing. Use Tooling (F) in order to remove retaining ring (27).
23. Remove lip seal (28).
Illustration 19 g00887619
24. Remove bolts (29) and cover (30).
8/10
336E L Excavators JRJ00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP56...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 20 g00887729
25. Remove seal (31) and backup ring (32).
Illustration 21 g00887754
26. Remove piston actuator (33) and seal (34).
Illustration 22 g00887762
27. Remove O-ring seal (35) from the housing of the travel motor.
9/10
336E L Excavators JRJ00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP56...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336E L EXCAVATOR JRJ
Configuration: 336E L Excavators JRJ00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Media Number -KENR8157-05 Publication Date -01/06/2014 Date Updated -12/06/2014
i07175112
Travel Motor - Assemble
SMCS - 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- M12 x 1.75 X 250 mm (10 inch) Threaded Rod 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
G - Loctite 242 -
1/10
336E L Excavators JRJ00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP56...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 1 g00887762
1. Install O-ring seal (35) onto the housing of the travel motor.
Illustration 2 g00887754
2. Install seal (34) and piston actuator (33). Lubricate the surfaces of piston actuator (33) with
lubricant that is being sealed.
Illustration 3 g00887729
3. Install backup ring (32) and seal (31).
2/10
336E L Excavators JRJ00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP56...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 4 g00887619
4. Install cover (30) and bolts (29). Tighten bolts (29) to a torque of 28 ± 7 N·m (21 ± 5 lb ft).
Illustration 5 g00887589
5. Apply Tooling (G) to the mating surface of lip seal (28). Use Tooling (E) to install lip seal
(28). Lubricate the sealing lip of lip seal (28) with lubricant that is being sealed.
6. Use Tooling (F) to install retaining ring (27).
Illustration 6 g02107975
7. Rotate the housing.
3/10
336E L Excavators JRJ00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP56...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. 8. Install keys (26) and locating pins (not shown) into the body of the travel motor.
9. Install bearing (25).
Illustration 7 g00887558
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
10. Install springs (24) into the barrel assembly. Install ball (23) onto springs (24). Lubricate
ball (23) with lubricant that is being sealed.
Illustration 8 g00887520
11. Lubricate the piston assemblies with lubricant that is being sealed. Install piston assemblies
and retainer plate (22) into barrel assembly (21).
4/10
336E L Excavators JRJ00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP56...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Note: Take note of the mark on the piston assembly and the barrel assembly. The pistons
must be returned to the same position.
Illustration 9 g00887501
12. Lubricate cam plate (20) with lubricant that is being sealed. Install cam plate (20) onto
barrel assembly (21).
Illustration 10 g00888697
13. Install shaft (15) into a suitable press. Install bearing race (19) onto shaft (15).
Illustration 11 g00887426
5/10
336E L Excavators JRJ00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP56...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. 14. Rotate shaft (15) in the suitable press. Use Tooling (D) to install retaining ring (17) onto
shaft (15).
Illustration 12 g00888710
15. Install bearing race (18) onto shaft (15).
Note: Bearing race (18) must contact retaining ring (17).
Illustration 13 g00887405
16. Install Tooling (C) into shaft (15). Install shaft (15) into rotating assembly (16).
17. Place the pump housing into Tooling (A).
6/10
336E L Excavators JRJ00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP56...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 14 g02107957
18. Use Tooling (C) to install rotating assembly (16) into the housing.
Illustration 15 g00887501
Illustration 16 g02107975
19. The notches in cam plate (20) must align with keys (26). The keys are located in the bottom
of the housing of the travel motor.
Illustration 17 g00887355
7/10
336E L Excavators JRJ00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP56...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. 20. Install plates (13) and friction discs (14) into the housing.
Note: Install the plates and the discs alternately.
Illustration 18 g00887336
21. Install backup ring (12) and seal (11) onto the brake piston.
22. Install backup ring (10) and seal (9) onto the brake piston.
Illustration 19 g00888967
23. Rotate brake piston (8).
24. Install brake piston (8) into the housing so that the cast mark on brake piston (8) is aligned
with the brake supply passage in the housing.
Note: Brake piston (8) must be level upon installation. The brake piston must be level to
prevent damage to the O-ring seals.
8/10
336E L Excavators JRJ00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP56...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 20 g00887311
25. Install springs (7) and O-ring seals (6).
Illustration 21 g00887302
26. Lubricate port plate (4) with lubricant that is being sealed. Install O-ring seal (3), port plate
(4), and bearing (5).
Illustration 22 g00887295
9/10
336E L Excavators JRJ00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP56...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
27. Install head (2) onto the body of the travel motor.
Note: During the installation of head (2) onto the travel motor, be careful not to damage the
mating surfaces of the components.
28. Install bolts (1). Tighten bolts (1) to a torque of 240 ± 40 N·m (177 ± 30 lb ft).
End By:
a. Install the travel motor.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Jul 20 09:02:23 UTC+0800 2020
10/10
336E L Excavators JRJ00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336E L EXCAVATOR JRJ
Configuration: 336E L Excavators JRJ00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Media Number -KENR8157-05 Publication Date -01/06/2014 Date Updated -12/06/2014
i07191698
Final Drive and Travel Motor - Remove and Install
SMCS - 4050; 4351
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-9200 Lever Puller Hoist 1
B 439-3938 Link Bracket 1
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
1. Refer to Operation and Maintenance Manual, "Final Drive Oil - Change" for the correct
draining and filling procedures.
1/5
336E L Excavators JRJ00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP56...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 1 g02108761
2. Remove bolts (1) and cover (2).
3. Separate the track.
Illustration 2 g02108762
4. Disconnect hose assemblies (3) ( 4), and (6). Remove fitting (5).
2/5
336E L Excavators JRJ00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP56...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 3 g02108781
5. Attach Tooling (A) and a suitable lifting device to final drive and travel motor (7). The
weight of final drive and travel motor (7) is approximately 860 kg (1896 lb). Put a slight
lifting tension on final drive and travel motor (7).
Illustration 4 g02108790
Note: Mark the orientation of the final drive and travel motor assembly for installation
purposes.
6. Remove bolts (8).
Illustration 5 g02108791
7. Use two bolts (8) to remove final drive and travel motor (7).
8. Carefully remove final drive and travel motor (7).
9. Remove bolts (8) from the frame.
3/5
336E L Excavators JRJ00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP56...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Illustration 6 g02108793
10. Remove bolts (9), counterbalance valve (10), and the O-ring seals.
Illustration 7 g02108794
11. Attach Tooling (B) and a suitable lifting device to travel motor (11). The weight of travel
motor (11) is approximately 84 kg (185 lb).
12. Remove four bolts (12) and travel motor (11) from final drive (13).
4/5
336E L Excavators JRJ00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP56...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Illustration 8 g02108914
13. Remove coupling (14).
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 1U-9200 Lever Puller Hoist 1
B 439-3938 Link Bracket 1
C - Loctite C5A Copper Anti-Seize -
1. Before assembly remove all compounds, oil, and dust.
2. Install final drive and travel motor (7) in the reverse order of removal.
a. Tighten bolts (9) to a torque of 80 ± 8 N·m (60 ± 6 lb ft).
b. Apply Tooling (C) to the threads of bolt (8).
c. Tighten bolts (8) to a torque of 250 ± 25 N·m (184 ± 18 lb ft) and turn an additional
angle of 45 ± 5 degrees. Refer to Service Magazine, M0083843, "An Improved Bolt
Tightening Procedure for the Critical Joints Is Now Used on All Excavators" for more
detail information.
d. Tighten hose assembly (3) to a torque of 160 ± 16 N·m (120 ± 12 lb ft).
e. Tighten bolts (1) to a torque of 130 ± 10 N·m (95 ± 7 lb ft).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Jul 20 09:03:19 UTC+0800 2020
5/5
336E L Excavators JRJ00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP56...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
27. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336E L EXCAVATOR JRJ
Configuration: 336E L Excavators JRJ00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Media Number -KENR8157-05 Publication Date -01/06/2014 Date Updated -12/06/2014
i03885522
Final Drive - Disassemble
SMCS - 4050-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Brackets 3
B 154-6183 Forcing Bolts 3
C 138-7576 Link Brackets 3
Start By:
a. Remove the final drive and the travel motor.
Illustration 1 g02131413
1/8
336E L Excavators JRJ00001-UP (MACHINE) POWERED BY C9.3 Engine(SEBP56...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...