The document provides instructions for removing and installing various components of a Caterpillar 621E wheel scraper, including:
1) Removing and installing the push-pull plate that connects the push-pull spring to the support assembly.
2) Disassembling and assembling the push-pull spring itself by removing discs and plates.
3) A detailed process for removing and installing the ejector cylinder, which requires the use of lifting tools and wood blocks due to the cylinder's weight.
4) Brief instructions for removing and adjusting the position of the lower front and guide rollers on the ejector assembly.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
1. Shutdown SIS
Previous Screen
Product: WHEEL SCRAPER
Model: 621E WHEEL SCRAPER 6BB
Configuration: 621E Wheel Tractor-Scraper 6BB01235-UP (MACHINE) POWERED BY 3406 Engine
Disassembly and Assembly
621E & 627E TRACTOR-SCRAPER VEHICLE SYSTEMS
Media Number -SENR3313-00 Publication Date -01/01/1987 Date Updated -11/10/2001
Push-Pull Plate
SMCS - 6057-011; 6057-012
Remove Push-Pull Plate
1. Start the engine and lift the bail assembly. Put a wood block between the bail assembly and
support assembly to hold the bail assembly up. Stop the engine.
View From Under Tractor
2. Remove the cotter pin, pin (2) and pin (1) that hold push-pull plate to the push-pull spring.
3. Fasten a hoist to push-pull plate (4) as shown. Remove two bearing caps (3). Remove the push-
pull plate. Weight of the plate is 236 kg (525 lb.).
4. Remove the bearings from the caps.
1/2(W)
w
2021/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
2. Install Push-Pull Plate
1. Install the bearings in caps (2).
2. Fasten a hoist to push-pull plate (1) and put it in position on the support assembly. Install the
two caps.
View From Under Tractor
3. Install pin (3). Install the pin and cotter pin that hold pin (3) in position.
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Apr 3 16:39:22 UTC+0800 2021
2/2(W)
w
2021/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
3. Shutdown SIS
Previous Screen
Product: WHEEL SCRAPER
Model: 621E WHEEL SCRAPER 6BB
Configuration: 621E Wheel Tractor-Scraper 6BB01235-UP (MACHINE) POWERED BY 3406 Engine
Disassembly and Assembly
621E & 627E TRACTOR-SCRAPER VEHICLE SYSTEMS
Media Number -SENR3313-00 Publication Date -01/01/1987 Date Updated -11/10/2001
Push-Pull Spring
SMCS - 6262-011; 6262-012; 6262-015; 6262-016
Remove Push-Pull Spring
Start By:
a. remove push-pull plate
1. Fasten a hoist to push-pull spring (2) as shown.
2. Remove eight bolts (1) and remove the spring. The weight of the spring is 45 kg (100 lb.).
Install Push-Pull Spring
1. Put push-pull spring (1) in position on the support assembly. Install the bolts that hold it.
End By:
1/4(W)
w
2021/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
4. a. install push-pull plate
Disassemble Push-Pull Spring
Start By:
a. remove push-pull spring
1. Remove nut (1) and the washer with tool (A).
2. Pull rod (5) out of plate assembly (4), ten spring discs (3) and plate assembly (2).
3. Remove four bolts (6) and lockwashers.
4. Remove pad (7) and the bushing from plate assembly (2).
Assemble Push-Pull Spring
2/4(W)
w
2021/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
5. 1. Install bushing (2) in plate assembly (1). Put pad (3) in position on the plate assembly and
install the four bolts that hold it.
2. Install plate assembly (5), ten spring discs (4) and plate assembly (7) on rod (6) as shown.
3. Install the washer and nut that holds the unit together. Do not tighten the nut at this time.
4. Put the push-pull spring on wood blocks as shown. Tighten nut (8) with tool (A).
5. Put a straight ruler against the ten spring discs. Make sure all the discs are in contact with the
ruler. If the discs are not in contact with the ruler, loosen nut (8) and make an adjustment to the
spring discs. The maximum amount of distance that the spring discs can be away from the ruler at
the center of the spring must not be more than 3.05 mm (.12 in.).
End By:
a. install push-pull spring
3/4(W)
w
2021/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
6. Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Apr 3 16:40:18 UTC+0800 2021
4/4(W)
w
2021/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
7. Shutdown SIS
Previous Screen
Product: WHEEL SCRAPER
Model: 621E WHEEL SCRAPER 6BB
Configuration: 621E Wheel Tractor-Scraper 6BB01235-UP (MACHINE) POWERED BY 3406 Engine
Disassembly and Assembly
621E & 627E TRACTOR-SCRAPER VEHICLE SYSTEMS
Media Number -SENR3313-00 Publication Date -01/01/1987 Date Updated -11/10/2001
Ejector Cylinder
SMCS - 5305-011; 5305-012
Remove Ejector Cylinder
1. Start the engine and lift the bowl until it is level. Put wood blocks (1) under the bowl to hold it
in position.
2. Retract the ejector fully. Stop the engine.
NOTE: Oil will drain out of the ejector cylinder when the hydraulic hoses are disconnected from
it. Put plugs in the hoses and cylinder as they are disconnected.
1/6(W)
w
2021/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
8. View From Under Scraper
3. Disconnect hose (4) from the rod end of the cylinder.
4. Disconnect hose (2) from the tube assembly. Remove the clip from the tube assembly.
5. Remove tube assembly (3).
View From Under Scraper Typical Example
6. Put tool (A) and a lifting strap around the head end of the ejector cylinder as shown. Tool (A)
will hold the cylinder up when the rear pin that holds the cylinder is removed.
7. Remove two bolts (6) and lock, washer (5) and the pin that holds the head end of the cylinder in
position.
View From Under Scraper
2/6(W)
w
2021/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
9. 8. Put wood blocks (7) on the crossmember of the bowl as shown. Make sure the blocks are under
the ejector cylinder.
9. Lower the cylinder on the wood blocks with tool (A). Remove tool (A) from around the
cylinder.
10. Install lifting straps around the ejector as shown.
11. Install tool (A) on the apron and the lifting straps as shown.
When the ejector is pulled forward with tool (A), make sure the cylinder
does not fall off of the wood blocks. Keep away from the area of the
ejector cylinder when the ejector is pulled forward.
12. Pull the ejector forward with tool (A). Do not pull the ejector too far forward. The ejector
cylinder will fall off the wood blocks on the crossmember.
13. After the ejector cylinder is out from under the power pack, use wood blocks (7) as a support
for the center of the cylinder as shown.
14. Fasten tool (A) and lifting straps to the ejector overflow guard. Fasten tool (A) and the lifting
straps to the ejector cylinder as shown.
15. Remove two bolts (8), lock and washer (9) and the pin that holds the ejector cylinder to the
ejector.
16. Lift the cylinder with tool (A) and turn it 90° in the bowl. Lower the cylinder on the frame of
the ejector. Remove tool (A) and the lifting straps.
3/6(W)
w
2021/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
10. 17. Fasten a hoist to ejector cylinder (10) and remove it from the machine. The weight of the
cylinder is 205 kg (456 lb.).
Install Ejector Cylinder
1. Fasten a hoist to ejector cylinder (1) and put it in position on the frame of the ejector as shown.
Remove the hoist.
4/6(W)
w
2021/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
11. 2. Fasten tool (A) and lifting straps to the ejector overflow guard. Fasten the lifting straps to the
ejector cylinder. Lift the cylinder and put it on wood blocks (3) as shown. Move the cylinder into
position until the hole in the rod end is in alignment with the blocks in the bracket on the ejector.
Install pin (2), the washer, lock and two bolts that hold pin (2) in position.
3. Put wood blocks on the crossmember of the bowl at the head end of the cylinder.
4. Lower the cylinder onto the wood blocks. Remove tool (A) and the lifting straps from the
cylinder.
Keep away from the area of the ejector cylinder when it is pulled into
position under the power pack with tool (A). The cylinder can fall off
the wood blocks.
View From Under Scraper
5. Fasten tool (A) to the rear of the ejector frame and to the frame of the bowl. Pull the ejector and
cylinder to the rear until the hole in the head end of the cylinder is in alignment with the holes in
the bracket in the frame of the bowl. Remove tool (A).
View From Under Scraper
5/6(W)
w
2021/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
12. 6. Fasten tool (A) and a lifting strap around the head end of the cylinder as shown. Tool (A) is
used to move the cylinder up or down.
7. Lift or lower the cylinder until pin (4) can be installed. Install the pin, washer, lock and two
bolts that hold the pin in position. Remove tool (A). Remove all wood blocks.
View From Under Scraper
8. Install tube assembly (7) and the clip.
9. Connect hose (6) to the cylinder.
10. Connect hose (5) to the tube assembly.
11. Start the engine and lift the bowl. Remove the wood blocks from under it.
12. Move the ejector fully forward and back to the rear several times to release the air in the
cylinder.
13. Fill the hydraulic tank with oil to the correct level. See the Maintenance Guide.
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Apr 3 16:41:14 UTC+0800 2021
6/6(W)
w
2021/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
13. Shutdown SIS
Previous Screen
Product: WHEEL SCRAPER
Model: 621E WHEEL SCRAPER 6BB
Configuration: 621E Wheel Tractor-Scraper 6BB01235-UP (MACHINE) POWERED BY 3406 Engine
Disassembly and Assembly
621E & 627E TRACTOR-SCRAPER VEHICLE SYSTEMS
Media Number -SENR3313-00 Publication Date -01/01/1987 Date Updated -11/10/2001
Ejector Carrier Rollers (Lower Front)
SMCS - 6229-011; 6229-012
Remove Ejector Carrier Rollers (Lower Front)
1. Start the engine and move the ejector to the rear all the way. Stop the engine.
2. Put tool (A) in position under the bracket on the ejector as shown. Tool (A) is used as a support.
3. Remove lock bolt (1) and the nut that holds the ejector carrier roller in position.
4. Turn shaft (2) until the roller is clear of the bowl. Remove ejector carrier roller (3).
Install Ejector Carrier Rollers (Lower Front)
1/2(W)
w
2021/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
14. 1. Put ejector carrier roller (1) in position in the bracket on the ejector as shown.
2. Make an adjustment to the ejector carrier roller for the correct distance between the ejector and
the bottom of the bowl as follows:
a. Turn shaft (2) until the minimum distance between the ejector and the bottom of the bowl is 0.8
mm (.03 in.). The maximum clearance between the ejector and the bottom of the bowl must not be
more than 12.7 mm (.50 in.).
3. Install the lock bolt and nut in the bracket.
4. Remove tool (A).
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Apr 3 16:42:09 UTC+0800 2021
2/2(W)
w
2021/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
15. Shutdown SIS
Previous Screen
Product: WHEEL SCRAPER
Model: 621E WHEEL SCRAPER 6BB
Configuration: 621E Wheel Tractor-Scraper 6BB01235-UP (MACHINE) POWERED BY 3406 Engine
Disassembly and Assembly
621E & 627E TRACTOR-SCRAPER VEHICLE SYSTEMS
Media Number -SENR3313-00 Publication Date -01/01/1987 Date Updated -11/10/2001
Ejector Guide Rollers
SMCS - 6230-011; 6230-012
Remove Ejector Guide Rollers
1. Start the engine and move the ejector forward all the way. Stop the engine.
2. Remove lock bolt (1) and nut that hold the guide roller in position.
3. Turn the shaft in the guide roller until there is clearance between the rail assembly and roller.
Remove ejector guide roller (2).
1/2(W)
w
2021/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
16. Install Ejector Guide Rollers
1. Put the ejector guide bolts (1) in position in the bracket on the ejector.
2. Make an adjustment to the ejector guide roller for the correct distance between the sides of the
ejector and the sides of the bowl as follows:
a. Turn shaft (3) until the minimum distance between the side of the ejector and the side of the
bowl is 3 mm (.12 in.). The maximum clearance between the side of the ejector and the side of the
bowl must not be more than 19 mm (.75 in.).
3. Install lock bolt (2) and the nut.
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Apr 3 16:43:05 UTC+0800 2021
2/2(W)
w
2021/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
17. Shutdown SIS
Previous Screen
Product: WHEEL SCRAPER
Model: 621E WHEEL SCRAPER 6BB
Configuration: 621E Wheel Tractor-Scraper 6BB01235-UP (MACHINE) POWERED BY 3406 Engine
Disassembly and Assembly
621E & 627E TRACTOR-SCRAPER VEHICLE SYSTEMS
Media Number -SENR3313-00 Publication Date -01/01/1987 Date Updated -11/10/2001
Ejector Rollers (Rear)
SMCS - 6229; 6230-011; 6230-012
Remove Ejector Rollers (Rear)
1. Put tool (A) and a block of wood under the rear of the ejector, and lift the ejector until the
weight is off the rear rollers.
2. Remove cover (1) from the top of the roller, and remove bolt (2) that holds the roller shaft to the
ejector frame.
1/4(W)
w
2021/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
18. 3. Remove cotter pin (3) and nut (4) from the roller shaft.
4. Use a brass bar (5) and a hammer to push roller shaft (6) down through the roller. Remove
roller shaft (6) and roller (7) from the ejector.
5. Use tooling (B) to remove bearing cup (8) from the top of the roller.
5. Use tooling (C) to remove the bearing cup, bearing cone and seal from the roller.
Install Ejector Rollers (Rear)
2/4(W)
w
2021/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
19. 1. Use tooling (B) to install bearing cups (4) in the roller.
2. Install bearing cone (3) in the bottom of the roller.
3. Use tooling (B) to install seal (2) in the roller with the spring loaded lip in as shown.
4. Put the roller in position on the ejector, and install roller shaft (1) up through the ejector and
roller. Install the bolt that holds the roller shaft to the ejector.
5. Fill the roller with 1P808 General Purpose Lubricant.
6. Install the top bearing cone (5), washer (6) and nut (7) on the roller shaft. Tighten nut (7) until
the roller stops when turned by hand. Then loosen nut (7) until the cotter pin that holds the nut in
place can be installed.
3/4(W)
w
2021/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
20. 7. Turn roller shaft (1) until the rear of the ejector is in the center of the ejector rails in the bowl
and dimension (X) is 1.57 mm (.062 in.) at the tightest place on the rails. Tighten bolt (8) to hold
the roller shaft in place. Remove tool (A) and the block from under the ejector.
NOTE: The other ejector rollers can be removed and installed in the same way. Make an
adjustment to the side and front rollers as follows:
8. With bolt (9) loose, turn roller shaft (10) until the ejector is in the center of the bowl and
dimension (Y) is 1.57 mm (.062 in.) at the tightest place on the rails. Tighten bolt (9) to hold the
roller shaft in place.
9. With bolt (11) loose, turn the roller shaft until the ejector is parallel to the floor of the bowl and
dimension (Z) is 3.18 mm (.125 in.) at the tightest place along the floor. Tighten bolt (11) to hold
the roller shaft in place.
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Apr 3 16:44:01 UTC+0800 2021
4/4(W)
w
2021/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
21. Shutdown SIS
Previous Screen
Product: WHEEL SCRAPER
Model: 621E WHEEL SCRAPER 6BB
Configuration: 621E Wheel Tractor-Scraper 6BB01235-UP (MACHINE) POWERED BY 3406 Engine
Disassembly and Assembly
621E & 627E TRACTOR-SCRAPER VEHICLE SYSTEMS
Media Number -SENR3313-00 Publication Date -01/01/1987 Date Updated -11/10/2001
Ejector Carrier Rollers (Lower Front) And Ejector Guide
Rollers
SMCS - 6229; 6230-016; 6330-015
Disassemble Ejector Carrier Rollers (Lower Front) And
Ejector Guide Rollers
Start By:
a. remove ejector carrier rollers (lower)
b. remove ejector guide rollers
1. Remove four bolts (1), cap (2) and the gasket from the roller.
2. Remove nut (3), lock and washer (4) from the shaft.
3. Remove bearing cone (5) from the roller.
1/5(W)
w
2021/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
22. 4. Remove shaft (6), seal (7) and the bearing cone from the roller.
5. Remove bearing cup (8) from the roller with a hammer and a brass punch.
6. Remove bearing cup (9) from the roller with a hammer and a brass punch.
Assemble Ejector Carrier Rollers (Lower Front) And Ejector
Guide Rollers
2/5(W)
w
2021/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
23. 1. Install the large bearing cup in the roller with tooling (A). Install the bearing cup until it makes
contact with the counterbore in the roller.
2. Turn the roller over. Install the small bearing cup in the roller with tool (A). Install the bearing
cup until it makes contact with the bottom of the counterbore in the roller.
3. Put 5P960 Multipurpose Grease on the large bearing cone. Install bearing cone (1) in the roller.
4. Install the lip type seal in the roller with tooling (B). Install the seal with the lip toward the
inside of the roller and until the seal makes contact with the bottom of the counterbore in the
roller.
5. Put 5P960 Multipurpose Grease on the lip of the seal.
3/5(W)
w
2021/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
24. 6. Install shaft (2) in the roller as shown.
7. Put 5P960 Multipurpose Grease inside the roller and on bearing cone (4). Install bearing cone
and washer (3).
8. Install nut (5). tighten the nut until the roller will not turn by hand. Loosen the nut 1/16 of one
turn.
9. Install gasket (8) and cap (6). Install bolts (7) that hold the cap.
End By:
a. install ejector carrier rollers (lower)
b. install ejector guide rollers
4/5(W)
w
2021/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
25. Shutdown SIS
Previous Screen
Product: WHEEL SCRAPER
Model: 621E WHEEL SCRAPER 6BB
Configuration: 621E Wheel Tractor-Scraper 6BB01235-UP (MACHINE) POWERED BY 3406 Engine
Disassembly and Assembly
621E & 627E TRACTOR-SCRAPER VEHICLE SYSTEMS
Media Number -SENR3313-00 Publication Date -01/01/1987 Date Updated -11/10/2001
Horizontal Cushion Hitch Bearings
SMCS - 6229; 6230-016; 6330-015
Remove Horizontal Cushion Hitch Bearings
Start By:
a. remove cushion hitch
1. Remove two forward horizontal hitch bearings (1) with tooling (A) as follows:
a. Remove one bearing with tooling (A) as shown.
b. Install tooling (A) on the other bearing support as in Step 1a.
c. Remove the other bearing with tooling (A).
1/6(W)
w
2021/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
26. 2. Remove two bearings (2) and two seal rings (3) from the cushion hitch.
3. Remove washer (4) from each bearing (2).
4. Remove two bearings (5) from the cushion hitch.
5. Remove two bearings (6) from hitch rear support with tooling (A) as follows:
a. Remove one bearing (6) with tooling (A) as shown.
b. Install tooling (A) on the other bearing support as in Step a.
c. Remove the other bearing (6) with tooling (A).
2/6(W)
w
2021/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
27. 6. Remove two seals (7) from forward horizontal hitch support.
7. Remove two bearings from horizontal hitch forward support with tooling (A).
Install Horizontal Cushion Hitch Bearings
NOTE: Lower the temperture of all cushion hitch horizontal bearings before installation.
3/6(W)
w
2021/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
28. 1. Install two forward horizontal cushion hitch bearings (1) in cushion hitch with tooling (A) as
follows:
a. Install one bearing (1) with tooling (A) as shown.
b. Install tooling (A) on the other bearing support as in Step 1a.
c. Install the other bearing (1) with tooling (A).
2. Install two rear cushion hitch horizontal bearings (2) in cushion hitch with tooling (B).
3. Install two seal rings (3) on cushion hitch rear horizontal bearings (2) with the chamfered edge
of the seal ring (3) toward the outside of the cushion hitch bearing support.
NOTE: Put a small amount of 5P960 Multipurpose Grease on both sides of the brass washer (4)
before it is installed in bearing (5).
4/6(W)
w
2021/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
29. 4. Install brass washer (4) in each of two bearings (5) with chamfered side of brass washer (4)
toward the inside of bearing (5).
5. Install two bearings (5) over bearings (2) and ring seals (3).
6. Install two bearings (6) in cushion hitch rear horizontal supports with tooling (B) as follows:
a. Install one bearing (6) with tooling (B) as shown.
b. Install tooling (B) on the other bearing support as in Step 6a.
c. Install the other bearing (6) with tooling (B).
7. Install two bearings in cushion hitch forward horizontal support (7) with tooling (A) as follows:
5/6(W)
w
2021/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
30. a. Pull rear bearing through support (7) with tooling (A) until the bearing is even with the rear seal
counterbore in support (7).
b. Install tooling (B) on the other bearing support as in Step 6a.
c. Install the other bearing (6) with tooling (B).
7. Install two bearings in cushion hitch forward horizontal support (7) with tooling (A) as follows:
a. Pull rear bearing through support (7) with tooling (A) until the bearing is even with the rear seal
counterbore in support (7).
b. Pull forward bearing into support (7) with tooling (A) until the bearing is even with the forward
seal counterbore in support (7).
8. Install two lip type seals in support (7) with tooling (C). Install the seals with the lips toward the
outside of the support (7) and until they make contact with the bottom of the seal counterbores in
support (7).
End By:
a. install cushion hitch
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Apr 3 16:45:52 UTC+0800 2021
6/6(W)
w
2021/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
31. Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
32. Shutdown SIS
Previous Screen
Product: WHEEL SCRAPER
Model: 621E WHEEL SCRAPER 6BB
Configuration: 621E Wheel Tractor-Scraper 6BB01235-UP (MACHINE) POWERED BY 3406 Engine
Disassembly and Assembly
621E & 627E TRACTOR-SCRAPER VEHICLE SYSTEMS
Media Number -SENR3313-00 Publication Date -01/01/1987 Date Updated -11/10/2001
Steering Link Assemblies
SMCS - 4305-011; 4305-012
Remove Steering Link Assemblies
NOTE: The steering link assemblies on the left and right sides of the machine are removed the
same way. The only difference is the steering cylinder (servo-sender) must be disconnected on the
left side of the machine.
1. Remove the four bolts, washers and two yokes (2) that hold pin assembly (1) in position.
2. Remove pin assembly (1) and make a separation of the steering cylinder rod end and the two
link assemblies.
1/6(W)
w
2021/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
33. 3. Fasten a hoist to link assembly (3). Remove the four bolts, washers and two yokes (5) that hold
pin assembly (4) in position. Remove the pin assembly. Remove the link assembly. The weight of
the link assembly is 41 kg (90 lb.).
4. Remove bolt (6) from the rod end of the steering cylinder (servo-sender).
5. Fasten a hoist to link assembly (8). Remove the four bolts, washers and two yokes (9) that hold
pin assembly (7) in position. Remove the pin assembly. Remove the link assembly. The weight of
the link assembly is 45 kg (100 lb.).
6. Remove the bearings from the two steering link assemblies with tooling (A).
2/6(W)
w
2021/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...