This document provides disassembly instructions for a travel motor on an excavator model 336D2 L. It involves removing over 30 individual parts in 27 steps, including removing the motor head assembly, port plate, springs, seals, plugs, relief valves, spools, and more. Special care must be taken when removing parts under spring pressure or with significant weight. Detailed illustrations are provided to identify each part and guide the disassembly process.
Caterpillar cat 336 d2 l excavator (prefix mbp) service repair manual (mbp000...fjekkdmmem
This document provides disassembly instructions for a 336D2 L excavator travel motor. It outlines 27 steps to fully disassemble the travel motor. These include removing the motor head assembly, springs, seals, plugs, relief valves, and other internal components. Tools such as a driver group, bearing puller group, and retaining ring pliers are required. Safety precautions are noted, such as wearing protective equipment when releasing spring forces.
Caterpillar cat 336 d2 l excavator (prefix mbp) service repair manual (mbp000...fjjskekdm
This document provides disassembly instructions for a 336D2 L excavator travel motor. It outlines 27 steps to fully disassemble the travel motor. These include removing the motor head assembly, springs, seals, plugs, relief valves, and other internal components. Tools such as a driver group, bearing puller group, and retaining ring pliers are required. Safety precautions are noted, such as wearing protective equipment when releasing spring forces.
Caterpillar cat 336 d2 l excavator (prefix gja) service repair manual (gja000...fjjfyjsekdmme
1) The document provides step-by-step instructions for disassembling the travel motor of a 336D2L excavator.
2) It describes removing over 25 components of the travel motor including the motor head assembly, piston assemblies, barrel assembly, springs, seals, and more.
3) Detailed illustrations are provided to accompany each step showing how to remove each component correctly.
Caterpillar Cat 336D2 L Excavator (Prefix GJA) Service Repair Manual Instant ...fskekkdmdmdm3e
1) The document provides step-by-step instructions for disassembling the travel motor of a 336D2L excavator.
2) It describes removing over 30 components of the travel motor including the motor head assembly, piston assemblies, barrel assembly, springs, seals, plates and more.
3) Detailed illustrations are provided to accompany each step showing how to remove each component using the recommended tools.
Caterpillar Cat 336D2 L Excavator (Prefix GJA) Service Repair Manual Instant ...fijsekkdmdm2w
This document provides instructions for disassembling the travel motor on a 336D2L excavator. It describes 27 steps to fully disassemble the travel motor, removing components like the motor head assembly, springs, seals, relief valves, plugs, and more. Precautions are provided to watch for spring forces and contain fluids. Tools needed include a transmission repair stand, lifting eye assembly, driver group, and other specialized tools. Reassembly will follow the disassembly steps in reverse order.
Caterpillar Cat 336D2 L Excavator (Prefix GJA) Service Repair Manual (GJA0000...f8uesjdkdmdm
1) The document provides step-by-step instructions for disassembling the travel motor of a 336D2L excavator.
2) It describes removing over 30 components of the travel motor including the motor head assembly, piston assemblies, barrel assembly, springs, seals, plates and more.
3) Detailed illustrations are provided to accompany each step showing how to remove each component using the recommended tools.
Caterpillar Cat 336D2 L Excavator (Prefix GJA) Service Repair Manual (GJA0000...f8sejdkdmdijd
1) The document provides step-by-step instructions for disassembling the travel motor of a 336D2L excavator.
2) It describes removing over 30 components of the travel motor including the motor head assembly, piston assemblies, barrel assembly, springs, seals, plates and more.
3) Detailed illustrations are provided to accompany each step showing how to remove each component using the recommended tools.
Caterpillar Cat 336D2 L Excavator (Prefix GJA) Service Repair Manual Instant ...fujkskemdmdm4r
This document provides instructions for disassembling the travel motor on a 336D2L excavator. It describes 27 steps to completely disassemble the travel motor, removing components like the motor head assembly, springs, seals, relief valves, plugs and more. Detailed illustrations accompany each step to show how to properly remove each part. Safety precautions are provided throughout to warn of potential hazards like parts propelled by spring forces.
Caterpillar cat 336 d2 l excavator (prefix mbp) service repair manual (mbp000...fjekkdmmem
This document provides disassembly instructions for a 336D2 L excavator travel motor. It outlines 27 steps to fully disassemble the travel motor. These include removing the motor head assembly, springs, seals, plugs, relief valves, and other internal components. Tools such as a driver group, bearing puller group, and retaining ring pliers are required. Safety precautions are noted, such as wearing protective equipment when releasing spring forces.
Caterpillar cat 336 d2 l excavator (prefix mbp) service repair manual (mbp000...fjjskekdm
This document provides disassembly instructions for a 336D2 L excavator travel motor. It outlines 27 steps to fully disassemble the travel motor. These include removing the motor head assembly, springs, seals, plugs, relief valves, and other internal components. Tools such as a driver group, bearing puller group, and retaining ring pliers are required. Safety precautions are noted, such as wearing protective equipment when releasing spring forces.
Caterpillar cat 336 d2 l excavator (prefix gja) service repair manual (gja000...fjjfyjsekdmme
1) The document provides step-by-step instructions for disassembling the travel motor of a 336D2L excavator.
2) It describes removing over 25 components of the travel motor including the motor head assembly, piston assemblies, barrel assembly, springs, seals, and more.
3) Detailed illustrations are provided to accompany each step showing how to remove each component correctly.
Caterpillar Cat 336D2 L Excavator (Prefix GJA) Service Repair Manual Instant ...fskekkdmdmdm3e
1) The document provides step-by-step instructions for disassembling the travel motor of a 336D2L excavator.
2) It describes removing over 30 components of the travel motor including the motor head assembly, piston assemblies, barrel assembly, springs, seals, plates and more.
3) Detailed illustrations are provided to accompany each step showing how to remove each component using the recommended tools.
Caterpillar Cat 336D2 L Excavator (Prefix GJA) Service Repair Manual Instant ...fijsekkdmdm2w
This document provides instructions for disassembling the travel motor on a 336D2L excavator. It describes 27 steps to fully disassemble the travel motor, removing components like the motor head assembly, springs, seals, relief valves, plugs, and more. Precautions are provided to watch for spring forces and contain fluids. Tools needed include a transmission repair stand, lifting eye assembly, driver group, and other specialized tools. Reassembly will follow the disassembly steps in reverse order.
Caterpillar Cat 336D2 L Excavator (Prefix GJA) Service Repair Manual (GJA0000...f8uesjdkdmdm
1) The document provides step-by-step instructions for disassembling the travel motor of a 336D2L excavator.
2) It describes removing over 30 components of the travel motor including the motor head assembly, piston assemblies, barrel assembly, springs, seals, plates and more.
3) Detailed illustrations are provided to accompany each step showing how to remove each component using the recommended tools.
Caterpillar Cat 336D2 L Excavator (Prefix GJA) Service Repair Manual (GJA0000...f8sejdkdmdijd
1) The document provides step-by-step instructions for disassembling the travel motor of a 336D2L excavator.
2) It describes removing over 30 components of the travel motor including the motor head assembly, piston assemblies, barrel assembly, springs, seals, plates and more.
3) Detailed illustrations are provided to accompany each step showing how to remove each component using the recommended tools.
Caterpillar Cat 336D2 L Excavator (Prefix GJA) Service Repair Manual Instant ...fujkskemdmdm4r
This document provides instructions for disassembling the travel motor on a 336D2L excavator. It describes 27 steps to completely disassemble the travel motor, removing components like the motor head assembly, springs, seals, relief valves, plugs and more. Detailed illustrations accompany each step to show how to properly remove each part. Safety precautions are provided throughout to warn of potential hazards like parts propelled by spring forces.
Caterpillar Cat 336D2 L Excavator (Prefix GJA) Service Repair Manual Instant ...ze3xiandiao
This document provides instructions for disassembling the travel motor on a 336D2L excavator. It describes 27 steps to completely disassemble the travel motor, removing components like the motor head assembly, springs, seals, relief valves, plugs, and more. Precautions are provided to watch for spring forces and contain fluids. Tools needed include a transmission repair stand, lifting eye assembly, driver group, and other specialized tools. Reassembly will follow the disassembly steps in reverse order.
Caterpillar Cat 336D2 L Excavator (Prefix GJA) Service Repair Manual (GJA0000...f7usuejkdkddm3
1) The document provides step-by-step instructions to disassemble a travel motor from an excavator model 336D2 L.
2) Over 25 steps are outlined to remove components like the motor head assembly, piston assemblies, barrel assembly, springs, seals and plates.
3) Tools and safety precautions are listed for tasks like removing components under spring pressure.
Caterpillar Cat 336D2 L Excavator (Prefix GJA) Service Repair Manual (GJA0000...ufs89eodkdmdm
This document provides instructions for disassembling the travel motor on a 336D2L excavator. It describes 27 steps to completely disassemble the travel motor. These include removing the motor head assembly, springs, seals, relief valves, plugs, and other internal components. Precautions are provided to safely release spring forces and contain fluids. Tools required include a transmission repair stand, lifting eye assembly, driver group, and other specialized tools.
Caterpillar Cat 336D2 L Excavator (Prefix GJA) Service Repair Manual (GJA0000...jdkskmmdmd1
1) The document provides step-by-step instructions to disassemble a travel motor from an excavator model 336D2 L.
2) Over 25 steps are outlined to remove components like the motor head assembly, piston assemblies, barrel assembly, springs, seals and plates.
3) Tools and safety precautions are listed for tasks like removing components under spring pressure.
Caterpillar Cat 336D2 L Excavator (Prefix GJA) Service Repair Manual (GJA0000...jdkskmdmdm
This document provides instructions for disassembling the travel motor on a 336D2L excavator. It describes 27 steps to completely disassemble the travel motor, removing components like the motor head assembly, springs, seals, relief valves, plugs, and more. Detailed illustrations accompany each step to show how to properly remove each part. Safety precautions are provided throughout to warn of potential hazards like parts propelled by springs.
Caterpillar Cat 336D2 L Excavator (Prefix GJA) Service Repair Manual (GJA0000...pwg56547003
1) The document provides step-by-step instructions to disassemble a travel motor from an excavator model 336D2 L.
2) Over 25 steps are outlined to remove components such as the motor head assembly, piston assemblies, barrel assembly, springs, seals and plates.
3) Tools and safety precautions are listed for tasks like removing components under spring pressure.
Caterpillar Cat 336D2 L Excavator (Prefix LAH) Service Repair Manual Instant ...fujkskemdmdm4r
1) The document provides disassembly instructions for a travel motor on an excavator model 336D2 L.
2) It describes 27 steps to disassemble the various components of the travel motor, including removing the motor head assembly, piston assemblies, barrel assembly, springs and seals.
3) Precautions are provided to watch for spring forces and ensure components are marked for correct reassembly.
Caterpillar Cat 336D2 L Excavator (Prefix LAH) Service Repair Manual Instant ...fijsekkdmdm2w
This document provides instructions for disassembling the travel motor on a 336D2 L excavator. It describes 27 steps to fully disassemble the travel motor, removing components like the motor head assembly, springs, seals, relief valves, plugs and more. Precautions are provided to release spring forces safely and contain fluids. Detailed illustrations accompany each step to clearly show how to remove each part in the proper sequence.
Caterpillar Cat 336D2 L Excavator (Prefix LAH) Service Repair Manual (LAH0000...f8uesjdkdmdm
This document provides instructions for disassembling the travel motor on a 336D2 L excavator. It describes 27 steps to fully disassemble the travel motor, removing components like the motor head assembly, springs, seals, relief valves, plugs, and more. Precautions are provided to release spring forces safely and contain fluids. Detailed illustrations accompany each step to clearly show how to remove each part.
Caterpillar Cat 336D2 L Excavator (Prefix LAH) Service Repair Manual (LAH0000...f8sejdkdmdijd
1) The document provides disassembly instructions for a travel motor on an excavator model 336D2 L.
2) It describes 27 steps to disassemble the various components of the travel motor, including removing the motor head assembly, piston assemblies, barrel assembly, springs and seals.
3) Precautions are provided to watch for spring forces and ensure components are marked for correct reassembly.
Caterpillar Cat 336D2 L Excavator (Prefix LAH) Service Repair Manual Instant ...ze3xiandiao
This document provides instructions for disassembling the travel motor on a 336D2 L excavator. It involves removing 27 parts in 27 steps, including removing the motor head assembly, springs, port plate, O-rings, plugs, relief valves, and ball bearing. Tools required include a transmission repair stand, lifting eye assembly, driver group, and various bolts, nuts and seals. Safety precautions are provided to release spring forces and contain fluids during disassembly.
Caterpillar Cat 336D2 L Excavator (Prefix LAH) Service Repair Manual (LAH0000...f7usuejkdkddm3
1) The document provides disassembly instructions for a travel motor on an excavator model 336D2 L.
2) It describes 27 steps to disassemble the various components of the travel motor, including removing the motor head assembly, piston assemblies, barrel assembly, springs and seals.
3) Precautions are provided to watch for spring forces and ensure components are marked for correct reassembly.
Caterpillar Cat 336D2 L Excavator (Prefix LAH) Service Repair Manual (LAH0000...ufs89eodkdmdm
1) The document provides disassembly instructions for a travel motor on an excavator model 336D2 L.
2) It describes 27 steps to disassemble the various components of the travel motor, including removing the motor head assembly, piston assemblies, barrel assembly, springs and seals.
3) Precautions are provided to watch for spring forces and ensure components are marked for correct reassembly.
Caterpillar Cat 336D2 L Excavator (Prefix LAH) Service Repair Manual (LAH0000...jdkskmmdmd1
1) The document provides disassembly instructions for a travel motor on an excavator model 336D2 L.
2) It describes 27 steps to disassemble the various components of the travel motor, including removing the motor head assembly, piston assemblies, barrel assembly, springs and seals.
3) Precautions are provided to watch for spring forces and ensure components are marked for correct reassembly.
Caterpillar Cat 336D2 L Excavator (Prefix LAH) Service Repair Manual Instant ...fskekkdmdmdm3e
1) The document provides disassembly instructions for a travel motor on an excavator model 336D2 L.
2) It describes 27 steps to disassemble the various components of the travel motor including removing the motor head assembly, piston assemblies, barrel assembly, springs and seals.
3) Detailed illustrations are provided to identify each part and tooling required is specified to properly disassemble the travel motor and release spring forces.
Caterpillar Cat 336D2 L Excavator (Prefix LAH) Service Repair Manual (LAH0000...jdkskmdmdm
This document provides instructions for disassembling the travel motor on a 336D2 L excavator. It describes 27 steps to fully disassemble the travel motor, removing components like the motor head assembly, springs, seals, relief valves, plugs, and more. Precautions are provided to release spring forces safely and contain fluids. Detailed illustrations accompany each step to clearly show how to remove each part.
Caterpillar Cat 336D2 L Excavator (Prefix LAH) Service Repair Manual (LAH0000...pwg56547003
1) The document provides disassembly instructions for a travel motor on an excavator model 336D2 L.
2) It describes 27 steps to disassemble the various components of the travel motor, including removing the motor head assembly, piston assemblies, barrel assembly, springs and seals.
3) Precautions are provided to watch for spring forces and ensure components are marked for correct reassembly.
Caterpillar Cat 325C FM EXCAVATOR (Prefix Y4P) Service Repair Manual (Y4P0000...ufs89eodkdmdm
This document provides instructions for disassembling and assembling the final drive of a 325C FM excavator. It lists the required tools and parts. The disassembly procedure involves removing over 30 components of the final drive including sprockets, gears, seals, plates, and housings. Detailed illustrations are provided to show how to remove each part correctly. The assembly procedure is not included.
The document provides instructions for disassembling a travel motor. It lists 31 steps to remove parts like the head, plates, seals, pins, and piston assemblies. Proper cleaning and identification of parts is emphasized to ensure correct reassembly. Tools required are listed in a table.
The document provides instructions for disassembling and assembling the travel motor of a 345C excavator. It lists 31 steps to disassemble the various components of the travel motor, including removing the head, brake piston, disks, rotating group, and seals. Proper identification and cleaning of parts is emphasized to avoid contamination. The appropriate tools are also listed.
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps to disassemble the motor by removing components like the head, plates, seals, pins, pistons and housing pieces. Identification marks should be made on parts for reassembly. Cleaning is important to prevent contamination. The assembly procedure is not described.
Caterpillar Cat 336E L Excavator (Prefix TEG) Service Repair Manual (TEG00001...ufs89eodkdmdm
This document provides the disassembly and assembly procedures for the travel motor of a 336E excavator. The disassembly procedure involves 27 steps to remove components such as the head, springs, brake piston, plates, and seals. The assembly procedure reverses the disassembly steps and includes lubricating components before installing them and ensuring proper alignment of parts using marks made during disassembly. Special safety precautions and tools are noted throughout to properly release spring forces and install seals and bearings.
More Related Content
Similar to Caterpillar Cat 336D2 L Excavator (Prefix MBP) Service Repair Manual (MBP00001 and up).pdf
Caterpillar Cat 336D2 L Excavator (Prefix GJA) Service Repair Manual Instant ...ze3xiandiao
This document provides instructions for disassembling the travel motor on a 336D2L excavator. It describes 27 steps to completely disassemble the travel motor, removing components like the motor head assembly, springs, seals, relief valves, plugs, and more. Precautions are provided to watch for spring forces and contain fluids. Tools needed include a transmission repair stand, lifting eye assembly, driver group, and other specialized tools. Reassembly will follow the disassembly steps in reverse order.
Caterpillar Cat 336D2 L Excavator (Prefix GJA) Service Repair Manual (GJA0000...f7usuejkdkddm3
1) The document provides step-by-step instructions to disassemble a travel motor from an excavator model 336D2 L.
2) Over 25 steps are outlined to remove components like the motor head assembly, piston assemblies, barrel assembly, springs, seals and plates.
3) Tools and safety precautions are listed for tasks like removing components under spring pressure.
Caterpillar Cat 336D2 L Excavator (Prefix GJA) Service Repair Manual (GJA0000...ufs89eodkdmdm
This document provides instructions for disassembling the travel motor on a 336D2L excavator. It describes 27 steps to completely disassemble the travel motor. These include removing the motor head assembly, springs, seals, relief valves, plugs, and other internal components. Precautions are provided to safely release spring forces and contain fluids. Tools required include a transmission repair stand, lifting eye assembly, driver group, and other specialized tools.
Caterpillar Cat 336D2 L Excavator (Prefix GJA) Service Repair Manual (GJA0000...jdkskmmdmd1
1) The document provides step-by-step instructions to disassemble a travel motor from an excavator model 336D2 L.
2) Over 25 steps are outlined to remove components like the motor head assembly, piston assemblies, barrel assembly, springs, seals and plates.
3) Tools and safety precautions are listed for tasks like removing components under spring pressure.
Caterpillar Cat 336D2 L Excavator (Prefix GJA) Service Repair Manual (GJA0000...jdkskmdmdm
This document provides instructions for disassembling the travel motor on a 336D2L excavator. It describes 27 steps to completely disassemble the travel motor, removing components like the motor head assembly, springs, seals, relief valves, plugs, and more. Detailed illustrations accompany each step to show how to properly remove each part. Safety precautions are provided throughout to warn of potential hazards like parts propelled by springs.
Caterpillar Cat 336D2 L Excavator (Prefix GJA) Service Repair Manual (GJA0000...pwg56547003
1) The document provides step-by-step instructions to disassemble a travel motor from an excavator model 336D2 L.
2) Over 25 steps are outlined to remove components such as the motor head assembly, piston assemblies, barrel assembly, springs, seals and plates.
3) Tools and safety precautions are listed for tasks like removing components under spring pressure.
Caterpillar Cat 336D2 L Excavator (Prefix LAH) Service Repair Manual Instant ...fujkskemdmdm4r
1) The document provides disassembly instructions for a travel motor on an excavator model 336D2 L.
2) It describes 27 steps to disassemble the various components of the travel motor, including removing the motor head assembly, piston assemblies, barrel assembly, springs and seals.
3) Precautions are provided to watch for spring forces and ensure components are marked for correct reassembly.
Caterpillar Cat 336D2 L Excavator (Prefix LAH) Service Repair Manual Instant ...fijsekkdmdm2w
This document provides instructions for disassembling the travel motor on a 336D2 L excavator. It describes 27 steps to fully disassemble the travel motor, removing components like the motor head assembly, springs, seals, relief valves, plugs and more. Precautions are provided to release spring forces safely and contain fluids. Detailed illustrations accompany each step to clearly show how to remove each part in the proper sequence.
Caterpillar Cat 336D2 L Excavator (Prefix LAH) Service Repair Manual (LAH0000...f8uesjdkdmdm
This document provides instructions for disassembling the travel motor on a 336D2 L excavator. It describes 27 steps to fully disassemble the travel motor, removing components like the motor head assembly, springs, seals, relief valves, plugs, and more. Precautions are provided to release spring forces safely and contain fluids. Detailed illustrations accompany each step to clearly show how to remove each part.
Caterpillar Cat 336D2 L Excavator (Prefix LAH) Service Repair Manual (LAH0000...f8sejdkdmdijd
1) The document provides disassembly instructions for a travel motor on an excavator model 336D2 L.
2) It describes 27 steps to disassemble the various components of the travel motor, including removing the motor head assembly, piston assemblies, barrel assembly, springs and seals.
3) Precautions are provided to watch for spring forces and ensure components are marked for correct reassembly.
Caterpillar Cat 336D2 L Excavator (Prefix LAH) Service Repair Manual Instant ...ze3xiandiao
This document provides instructions for disassembling the travel motor on a 336D2 L excavator. It involves removing 27 parts in 27 steps, including removing the motor head assembly, springs, port plate, O-rings, plugs, relief valves, and ball bearing. Tools required include a transmission repair stand, lifting eye assembly, driver group, and various bolts, nuts and seals. Safety precautions are provided to release spring forces and contain fluids during disassembly.
Caterpillar Cat 336D2 L Excavator (Prefix LAH) Service Repair Manual (LAH0000...f7usuejkdkddm3
1) The document provides disassembly instructions for a travel motor on an excavator model 336D2 L.
2) It describes 27 steps to disassemble the various components of the travel motor, including removing the motor head assembly, piston assemblies, barrel assembly, springs and seals.
3) Precautions are provided to watch for spring forces and ensure components are marked for correct reassembly.
Caterpillar Cat 336D2 L Excavator (Prefix LAH) Service Repair Manual (LAH0000...ufs89eodkdmdm
1) The document provides disassembly instructions for a travel motor on an excavator model 336D2 L.
2) It describes 27 steps to disassemble the various components of the travel motor, including removing the motor head assembly, piston assemblies, barrel assembly, springs and seals.
3) Precautions are provided to watch for spring forces and ensure components are marked for correct reassembly.
Caterpillar Cat 336D2 L Excavator (Prefix LAH) Service Repair Manual (LAH0000...jdkskmmdmd1
1) The document provides disassembly instructions for a travel motor on an excavator model 336D2 L.
2) It describes 27 steps to disassemble the various components of the travel motor, including removing the motor head assembly, piston assemblies, barrel assembly, springs and seals.
3) Precautions are provided to watch for spring forces and ensure components are marked for correct reassembly.
Caterpillar Cat 336D2 L Excavator (Prefix LAH) Service Repair Manual Instant ...fskekkdmdmdm3e
1) The document provides disassembly instructions for a travel motor on an excavator model 336D2 L.
2) It describes 27 steps to disassemble the various components of the travel motor including removing the motor head assembly, piston assemblies, barrel assembly, springs and seals.
3) Detailed illustrations are provided to identify each part and tooling required is specified to properly disassemble the travel motor and release spring forces.
Caterpillar Cat 336D2 L Excavator (Prefix LAH) Service Repair Manual (LAH0000...jdkskmdmdm
This document provides instructions for disassembling the travel motor on a 336D2 L excavator. It describes 27 steps to fully disassemble the travel motor, removing components like the motor head assembly, springs, seals, relief valves, plugs, and more. Precautions are provided to release spring forces safely and contain fluids. Detailed illustrations accompany each step to clearly show how to remove each part.
Caterpillar Cat 336D2 L Excavator (Prefix LAH) Service Repair Manual (LAH0000...pwg56547003
1) The document provides disassembly instructions for a travel motor on an excavator model 336D2 L.
2) It describes 27 steps to disassemble the various components of the travel motor, including removing the motor head assembly, piston assemblies, barrel assembly, springs and seals.
3) Precautions are provided to watch for spring forces and ensure components are marked for correct reassembly.
Similar to Caterpillar Cat 336D2 L Excavator (Prefix MBP) Service Repair Manual (MBP00001 and up).pdf (17)
Caterpillar Cat 325C FM EXCAVATOR (Prefix Y4P) Service Repair Manual (Y4P0000...ufs89eodkdmdm
This document provides instructions for disassembling and assembling the final drive of a 325C FM excavator. It lists the required tools and parts. The disassembly procedure involves removing over 30 components of the final drive including sprockets, gears, seals, plates, and housings. Detailed illustrations are provided to show how to remove each part correctly. The assembly procedure is not included.
The document provides instructions for disassembling a travel motor. It lists 31 steps to remove parts like the head, plates, seals, pins, and piston assemblies. Proper cleaning and identification of parts is emphasized to ensure correct reassembly. Tools required are listed in a table.
The document provides instructions for disassembling and assembling the travel motor of a 345C excavator. It lists 31 steps to disassemble the various components of the travel motor, including removing the head, brake piston, disks, rotating group, and seals. Proper identification and cleaning of parts is emphasized to avoid contamination. The appropriate tools are also listed.
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps to disassemble the motor by removing components like the head, plates, seals, pins, pistons and housing pieces. Identification marks should be made on parts for reassembly. Cleaning is important to prevent contamination. The assembly procedure is not described.
Caterpillar Cat 336E L Excavator (Prefix TEG) Service Repair Manual (TEG00001...ufs89eodkdmdm
This document provides the disassembly and assembly procedures for the travel motor of a 336E excavator. The disassembly procedure involves 27 steps to remove components such as the head, springs, brake piston, plates, and seals. The assembly procedure reverses the disassembly steps and includes lubricating components before installing them and ensuring proper alignment of parts using marks made during disassembly. Special safety precautions and tools are noted throughout to properly release spring forces and install seals and bearings.
Caterpillar Cat 336E L Excavator (Prefix KED) Service Repair Manual (KED00001...ufs89eodkdmdm
The document provides instructions for assembling a travel motor on an excavator. It details 27 steps including installing seals, springs, pistons and other components into the motor housing. The motor is then installed onto the final drive assembly and excavator frame using bolts. Proper lubrication and torque specifications are emphasized to correctly assemble the travel motor.
1. The document provides installation instructions for an implement pump on a D8T track-type tractor. It describes 34 steps for installing various parts like valves, springs, seals and bearings into the pump housing.
2. Precautions are provided to ensure fluids are contained and parts are cleaned before assembly. Tools required are listed. Lubrication and heating of some parts is specified before installation.
3. Once assembled, the pump is attached to the tractor using bolts and hoses are connected to the manifold and slip joints.
This document provides instructions for removing and installing the front housing of a C27 Industrial Engine. The removal procedure involves detaching various components from the front of the engine like the water pump, oil filter housing, and brackets. Tools are required to remove some parts. The installation procedure specifies applying sealant, positioning the front housing and gasket, and installing bolts and other parts in the reverse order of removal. Tightening torques are provided for the bolts.
This document provides instructions for disassembling and assembling components of a C27 Industrial Engine, including:
1. Removing and installing the auxiliary drive by removing nuts, studs, pulley, gear, bearings, seals, and shaft.
2. Removing and installing the valve mechanism cover by removing and installing bolts and covers.
3. Removing and installing the valve mechanism cover base by removing tubes, harnesses, bolts, and installing seals and components.
This document provides instructions for removing and installing various fuel system components on a Caterpillar C9 Industrial Engine, including:
- Removing and installing the fuel priming pump
- Removing and installing the fuel filter base
- Removing a unit injector from the cylinder head
The procedures describe draining fluids, removing bolts and hoses, cleaning parts, replacing seals, and torquing fasteners to the specified values. Special tools are listed for many of the removal and installation steps.
This document provides instructions for removing and installing inlet and exhaust valves on a C27 Industrial Engine. It describes:
- Using a valve spring compressor tool to remove the valve springs and valve spring retainers.
- Inspecting the valves and checking the spring force.
- Lubricating the valve stems before installation and compressing the springs with a tool to install the retainers.
- Cautions for wearing protective equipment when working with springs to avoid injury from parts propelled by the springs.
This document provides instructions for removing and installing various engine components on a Caterpillar C27 Industrial Engine, including:
1) Valves, springs, and related parts using specialized tools to compress springs.
2) Valve guides using a driver tool and ensuring proper height.
3) Valve seat inserts using an extractor tool and driver to install new inserts.
4) The engine oil filter base and related internal parts, noting any spring pressure hazards.
This document provides instructions for removing and installing the engine oil filter base and oil cooler on a Caterpillar C9 Industrial Engine. It describes:
- Draining the coolant from the cooling system before removal
- Using a strap wrench to remove the oil filter
- Disconnecting hoses and removing bolts to take off the oil filter base and oil cooler
- Reversing the removal procedures for installation, including applying oil to seals and tightening bolts in a specific sequence
1) The document provides instructions for removing and installing various components of a Caterpillar C9.3 industrial engine, including disconnecting snap-to-connect fittings, removing and installing a muffler, and removing and installing a fuel priming pump and fuel filter base.
2) The procedures include illustrations showing the components and numbered steps for disassembly and reassembly. Safety warnings are provided at the beginning regarding relieving pressures before disconnection.
3) Torque specifications and required tools are listed for relevant installation steps.
This document provides instructions for removing and installing various engine components on a Caterpillar C9 Industrial Engine, including:
1. Valves, valve guides, and valve seat inserts. It describes using specialized tools to compress springs and extract/install parts.
2. The engine oil filter base, oil cooler, and oil pump. It emphasizes cleaning parts and contains fluids properly during removal and installation.
3. Safety precautions are provided, such as wearing protective equipment when working with spring-loaded parts and ensuring contaminants are avoided. Numerical sequences and specifications are given for installing certain parts correctly.
This document provides instructions for removing and installing the engine oil filter base and oil cooler on a Caterpillar C9 Industrial Engine. It describes:
- Draining the coolant from the cooling system before removal
- Using a strap wrench to remove the oil filter
- Disconnecting hoses and removing bolts to take off the oil filter base and oil cooler
- Reversing the removal procedures for installation, including applying oil to seals and tightening bolts in a specific sequence
Caterpillar Cat 345D L Excavator (Prefix RGG) Service Repair Manual (RGG00001...ufs89eodkdmdm
This document provides instructions for disassembling and assembling the travel motor of a 345D L Excavator. It lists the required tools and gives step-by-step instructions to remove components such as the head, plates, seals, pins, bearing, and piston assemblies. Special care must be taken to clean parts and ensure they are reinstalled in their original locations. Proper assembly prevents damage and contamination of parts.
This document provides instructions for disassembling and assembling the torque converter and transmission of a 938F wheel loader. It describes removing over 20 components of the torque converter including the transmission cover, driver gear, stator carrier, and retaining rings. It then details disassembling the transmission by removing the shafts, gears, clutch plates, seals, and over 15 additional parts. The goal is to allow maintenance and repair of these core powertrain systems.
Caterpillar Cat 345D L Excavator (Prefix RGD) Service Repair Manual (RGD00001...ufs89eodkdmdm
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists the required tools and gives step-by-step instructions for removing components like the head, plates, seals, pins, and piston assemblies. The instructions describe cleaning parts and ensuring they are reinstalled in their original locations to properly reassemble the travel motor.
Caterpillar Cat 345D L Excavator (Prefix YEE) Service Repair Manual (YEE00001...ufs89eodkdmdm
This document provides instructions for removing and installing various engine components on a 345D L Excavator, including:
1. The rear gear group, which involves removing several gears, seals, and bearings.
2. The flywheel, which requires lifting equipment and guide studs due to its weight.
3. The crankshaft rear seal, which is removed after removing the flywheel. Precise instructions are provided along with safety notices.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D2 L EXCAVATOR MBP
Configuration: 336D2 L Excavator MBP00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
336D 2L and 340D 2L Excavators Machine Systems
Media Number -M0065626-02 Publication Date -01/09/2015 Date Updated -14/12/2017
i06605028
Travel Motor - Disassemble
SMCS - 4351-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- M12 x 1.75 x 250 mm (10 inch) Threaded Rod 1
B
8T-0651 Bolt 1
8T-4167 Hard Washer 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
Start By:
a. Remove the travel motor.
1. Fasten the travel motor in Tooling (A) in a vertical position. The weight of the travel motor
is approximately 88 kg (195 lb).
1/10
336D2 L Excavator MBP00001-UP (MACHINE) POWERED BY C9 Engine(M00766...
2020/6/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
3. 2. Put an alignment mark across the head and the body of the travel motor for assembly
purposes. The head must be reinstalled in the heads original position on the body of the
travel motor.
Illustration 1 g00887295
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
Note: During the removal of head (2) from the travel motor, be careful not to damage the
mating surfaces of the components.
3. Remove bolts (1).
4. Remove head (2) from the body of the travel motor.
2/10
336D2 L Excavator MBP00001-UP (MACHINE) POWERED BY C9 Engine(M00766...
2020/6/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
4. Illustration 2 g00887302
5. Remove O-ring seal (3), port plate (4), and bearing (5).
Illustration 3 g00887311
6. Remove O-ring seals (6). Remove springs (7).
Illustration 4 g00887331
Illustration 5 g00890074
Example of the use of Tooling (B).
3/10
336D2 L Excavator MBP00001-UP (MACHINE) POWERED BY C9 Engine(M00766...
2020/6/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
5. 7. Place a shop towel over brake piston (8). Retain brake piston (8) with Tooling (B). Apply
approximately 525 kPa (75 psi) of shop air pressure to brake release Port (Y). Make sure
that the shop air pressure is free of water. Brake piston (8) will move up the piston guide,
and out of the piston guide. Remove brake piston (8) from the body of the travel motor.
Illustration 6 g00887336
8. Remove seal (9) and backup ring (10) from the brake piston.
9. Remove seal (11) and backup ring (12) from the brake piston.
Illustration 7 g00887355
10. Remove plates (13) and friction discs (14).
4/10
336D2 L Excavator MBP00001-UP (MACHINE) POWERED BY C9 Engine(M00766...
2020/6/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
6. Illustration 8 g02107957
Illustration 9 g00887405
Illustration 10 g00887424
11. Install Tooling (C) into shaft (15). Use a prybar to remove the rotating assembly (16) from
the housing.
12. Remove Tooling (C) from shaft (15).
13. Remove shaft (15) from rotating assembly (16).
Illustration 11 g00887426
5/10
336D2 L Excavator MBP00001-UP (MACHINE) POWERED BY C9 Engine(M00766...
2020/6/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
7. 14. Use Tooling (D) to remove retaining ring (17) from shaft (15).
Illustration 12 g00887445
15. Use a suitable press to remove bearing race (18) from shaft (15).
Illustration 13 g03870797
16. Rotate shaft (15). Use a suitable press and Tooling (E) to remove bearing race (19) from
shaft (15).
Illustration 14 g03870686
17. Remove cam plate (20) from barrel assembly (16).
6/10
336D2 L Excavator MBP00001-UP (MACHINE) POWERED BY C9 Engine(M00766...
2020/6/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
8. Illustration 15 g03870754
18. Remove piston assemblies and retainer plate (21) from barrel assembly (16).
Note: Place marks on the pistons and the barrel assembly. The pistons must be returned to
the original position.
Illustration 16 g03870760
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
19. Remove ball (22) and springs (23).
7/10
336D2 L Excavator MBP00001-UP (MACHINE) POWERED BY C9 Engine(M00766...
2020/6/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
9. Illustration 17 g03870766
20. Remove bearing (24).
21. Remove keys (25) and locating pins (not shown) from the body of the travel motor.
Illustration 18 g03870770
22. Rotate the housing. Use Tooling (F) to remove retaining ring (26).
23. Remove lip seal (27).
Illustration 19 g03870778
24. Remove bolts (28) and cover (29).
8/10
336D2 L Excavator MBP00001-UP (MACHINE) POWERED BY C9 Engine(M00766...
2020/6/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
10. Illustration 20 g03870779
25. Remove seal (30) and backup ring (31).
Illustration 21 g03870780
26. Remove piston actuator (32) and seal (33).
Illustration 22 g03870784
27. Remove O-ring seal (34) from the housing of the travel motor.
9/10
336D2 L Excavator MBP00001-UP (MACHINE) POWERED BY C9 Engine(M00766...
2020/6/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
11. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D2 L EXCAVATOR MBP
Configuration: 336D2 L Excavator MBP00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
336D 2L and 340D 2L Excavators Machine Systems
Media Number -M0065626-02 Publication Date -01/09/2015 Date Updated -14/12/2017
i07195340
Travel Motor - Disassemble
SMCS - 4351-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 421-5662 Lifting Eye Assembly 1
C
6V-5215 M8 X 1.25 X 16 MM Bolt 2
9M-1974 M8 Hard Washer 2
D 1P-0510 Driver Gp 1
Start By:
a. Remove travel motor.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
1/14
336D2 L Excavator MBP00001-UP (MACHINE) POWERED BY C9 Engine(M00766...
2020/6/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
12. Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
Illustration 1 g06249277
1. Fasten travel motor (1) in a vertical position on Tooling (A). The weight of travel motor (1)
is approximately 82 kg (180 lb).
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
2. Remove bolts (2) and cap (3).
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
2/14
336D2 L Excavator MBP00001-UP (MACHINE) POWERED BY C9 Engine(M00766...
2020/6/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
13. Follow the recommended procedure and use all recommended tooling to
release the spring force.
Illustration 2 g06249309
Illustration 3 g06249323
Illustration 4 g06249325
3. Remove bolts (4) and cap (5).
4. Remove spring (6), spring (9), spool assembly (8), and spring seats (7).
3/14
336D2 L Excavator MBP00001-UP (MACHINE) POWERED BY C9 Engine(M00766...
2020/6/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
14. Illustration 5 g06249329
5. Remove plug (11), relief valve (10), and the O-ring seals.
Illustration 6 g06249334
6. Remove plug (13), relief valve (12), and the O-ring seals.
Illustration 7 g06249337
7. Remove plug (14), and the O-ring seal.
4/14
336D2 L Excavator MBP00001-UP (MACHINE) POWERED BY C9 Engine(M00766...
2020/6/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
15. Illustration 8 g06249341
Illustration 9 g06249344
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
8. Remove plug (15), spool assembly (16), spring (17), and the O-ring seals.
5/14
336D2 L Excavator MBP00001-UP (MACHINE) POWERED BY C9 Engine(M00766...
2020/6/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
16. Illustration 10 g06249348
9. Remove plugs (18) and the O-ring seals.
Illustration 11 g06249351
10. Remove bolts (19).
Illustration 12 g06249354
11. Attach Tooling (B) and a suitable lifting device to motor head assembly (20). The weight of
motor head assembly (20) is approximately 27 kg (60 lb). Remove motor head assembly
(20).
6/14
336D2 L Excavator MBP00001-UP (MACHINE) POWERED BY C9 Engine(M00766...
2020/6/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
17. Illustration 13 g06250338
12. Remove the ball bearing that is located on the bottom side of motor head assembly (20).
Illustration 14 g06249364
Port plate (25) may still be adhered to the bottom of motor head assembly (20).
13. Remove O-ring seals (21), O-ring seal (22), springs (23), springs (24), and port plate (25).
Note: Note the location of springs (23). They must be installed in the same location during
the assembly procedure.
Illustration 15 g06249511
7/14
336D2 L Excavator MBP00001-UP (MACHINE) POWERED BY C9 Engine(M00766...
2020/6/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
18. 14. Insert Tooling (C) into piston assembly (26). Use a suitable prying device and Tooling (C)
to remove piston assembly (26).
Illustration 16 g06250418
15. Remove O-ring seal (27) and O-ring seal (28).
Illustration 17 g06249522
16. Use suitable prying devices to remove guide assembly (29).
Illustration 18 g06249535
17. Remove O-ring seal (30).
8/14
336D2 L Excavator MBP00001-UP (MACHINE) POWERED BY C9 Engine(M00766...
2020/6/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
19. Illustration 19 g06249539
Illustration 20 g06249544
18. Remove separator plates (31) and friction plates (32). Note the alternating order of separator
plates (31) and friction plates (32) for assembly purposes.
Illustration 21 g06249564
19. Remove barrel assembly (33).
Note: Do not allow the components of barrel assembly (33) to come apart while you
remove barrel assembly (33). The components of barrel assembly (33) must be reinstalled
into the original positions.
9/14
336D2 L Excavator MBP00001-UP (MACHINE) POWERED BY C9 Engine(M00766...
2020/6/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
20. Illustration 22 g06249598
Note: Mark the component locations for assembly purposes before you disassemble the
barrel assembly.
20. Remove piston assemblies (34) and retainer (35).
Illustration 23 g06249609
21. Remove hold down ball (36).
Illustration 24 g06249621
10/14
336D2 L Excavator MBP00001-UP (MACHINE) POWERED BY C9 Engine(M007...
2020/6/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
21. 22. Remove dowel pins (37).
Illustration 25 g06249657
23. Put location marks on swashplate (38) for assembly purposes. Remove swashplate (38).
Illustration 26 g06249682
24. Remove pistons (39) and the balls.
Illustration 27 g06249751
25. Remove springs (40).
11/14
336D2 L Excavator MBP00001-UP (MACHINE) POWERED BY C9 Engine(M007...
2020/6/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
22. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
Illustration 28 g06249755
Illustration 29 g06249758
26. Use a suitable press and Tooling (D) to remove snap ring (41), spacers (42), and spring (43).
12/14
336D2 L Excavator MBP00001-UP (MACHINE) POWERED BY C9 Engine(M007...
2020/6/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
23. Illustration 30 g06249760
27. Use a soft faced hammer to remove shaft assembly (44). Remove shaft assembly (44) in the
direction that is indicated by the arrow.
28. Remove O-ring seal (45).
Illustration 31 g06249762
29. Remove lip seal (46).
Illustration 32 g06249763
30. Use a suitable press to push shaft (47) out of bearing (48).
13/14
336D2 L Excavator MBP00001-UP (MACHINE) POWERED BY C9 Engine(M007...
2020/6/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
24. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D2 L EXCAVATOR MBP
Configuration: 336D2 L Excavator MBP00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
336D 2L and 340D 2L Excavators Machine Systems
Media Number -M0065626-02 Publication Date -01/09/2015 Date Updated -14/12/2017
i06242093
Travel Motor - Assemble
SMCS - 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- M12 x 1.75 X 250 mm (10 inch) Threaded Rod 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
G - Loctite 243 -
1/10
336D2 L Excavator MBP00001-UP (MACHINE) POWERED BY C9 Engine(M00766...
2020/6/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
25. Illustration 1 g03870784
1. Install O-ring seal (34) onto the housing of the travel motor.
Illustration 2 g03870780
2. Install seal (33) and piston actuator (32). Lubricate the surfaces of piston actuator (32) with
lubricant that is being sealed.
Illustration 3 g03870779
3. Install backup ring (31) and seal (30).
2/10
336D2 L Excavator MBP00001-UP (MACHINE) POWERED BY C9 Engine(M00766...
2020/6/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
26. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
27. Illustration 4 g03870778
4. Install cover (29) and bolts (28). Tighten bolts (28) to a torque of 28 ± 7 N·m
(248 ± 62 lb in).
Illustration 5 g03870770
5. Apply Tooling (G) to the mating surface of lip seal (27). Use Tooling (E) in order to install
lip seal (27). Lubricate the sealing lip of lip seal (27) with lubricant that is being sealed.
6. Use Tooling (F) in order to install retaining ring (26).
Illustration 6 g03870766
3/10
336D2 L Excavator MBP00001-UP (MACHINE) POWERED BY C9 Engine(M00766...
2020/6/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
28. 7. Rotate the housing.
8. Install keys (25) and locating pins (not shown) into the body of the travel motor.
9. Install bearing (24).
Illustration 7 g03870760
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
10. Install springs (23) into the barrel assembly. Install ball (22) onto springs (23). Lubricate
ball (22) with lubricant that is being sealed.
Illustration 8 g03870754
11. Lubricate the piston assemblies with lubricant that is being sealed. Install piston assemblies
and retainer plate (21) into barrel assembly (16).
4/10
336D2 L Excavator MBP00001-UP (MACHINE) POWERED BY C9 Engine(M00766...
2020/6/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...