The document provides instructions for disassembling and assembling a piston pump used in a hydraulic excavator fan. It details 30 steps for removing parts like bearings, seals, pistons, springs, and housings. Proper cleaning of parts is emphasized. Tools needed are also listed. The overall process dismantles the pump into its individual components and then reassembles it for installation.
Caterpillar Cat 336D L Excavator (Prefix ZML) Service Repair Manual (ZML00001...zatao0179249295
1. The document provides instructions for disassembling and assembling a piston pump used in a 336D L excavator.
2. The disassembly process involves using various tools to remove over 30 individual parts from the pump in sequential order.
3. Reassembly requires carefully installing each part in reverse order, ensuring proper placement of seals, bearings, springs and other components. Special tools and procedures are specified to prevent injury.
Caterpillar Cat 336D L Excavator (Prefix ZML) Service Repair Manual (ZML00001...kesi7153062
1. The document provides instructions for disassembling and assembling a piston pump used in a hydraulic excavator fan.
2. The disassembly process involves using various tools to remove over 30 individual parts from the pump in sequential order.
3. Reassembly requires carefully installing each part in reverse order, ensuring proper placement of seals, bearings, springs and other components.
4. Cleanliness is emphasized throughout to prevent contamination during assembly.
Caterpillar Cat 336D L Excavator (Prefix ZML) Service Repair Manual (ZML00001...cnp692569
1. The document provides instructions for disassembling and assembling the piston pump (hydraulic fan) of an excavator.
2. The disassembly process involves removing 30 individual parts in 9 steps, taking care with spring-loaded components.
3. Reassembly requires properly cleaning, inspecting, and installing the 30 components in the reverse order of disassembly over 29 steps. Proper tooling and safety precautions are noted throughout.
Caterpillar cat 336 d l excavator (prefix mds) service repair manual (mds0000...dueikdkmem
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and swashplate. It then lists 27 steps to reassemble the pump, replacing components in the reverse order and taking precautions around spring-loaded parts. The instructions specify using the proper tools and cleaning parts thoroughly during assembly.
Caterpillar cat 336 d l excavator (prefix mds) service repair manual (mds0000...fjskekxcddmmme
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. The disassembly process involves using tools to remove components like bearings, seals, pistons and springs. The assembly process specifies 30 steps to reinstall these components in the proper order and includes ensuring correct shimming and end play. Precautions are provided to wear protective equipment when working with pressurized or spring-loaded parts.
Caterpillar cat 336 d l excavator (prefix mds) service repair manual (mds0000...cdfzxs
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It describes removing parts like the head, seals, bearings, pistons, and shaft. Cleanliness is important during disassembly and assembly. Various tools are required like retaining ring pliers and a bearing puller. The instructions specify installing parts in the reverse order of removal and refer to other sections for removing components like the fan prior to accessing the piston pump.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual Instant D...fijsekkdmdm2w
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings, seals, bearings, pistons and other components. The assembly process specifies cleaning parts and using tools and procedures to carefully install components like bearings, seals, springs, pins and plates in the correct order and orientation. Torques and end play are checked during assembly to ensure proper installation.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...f8uesjdkdmdm
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings, seals, bearings, pistons and other components. The assembly process specifies cleaning parts and provides 30 steps for installing components in the correct order and ensuring proper operation, including adjusting end play and installing springs and seals.
Caterpillar Cat 336D L Excavator (Prefix ZML) Service Repair Manual (ZML00001...zatao0179249295
1. The document provides instructions for disassembling and assembling a piston pump used in a 336D L excavator.
2. The disassembly process involves using various tools to remove over 30 individual parts from the pump in sequential order.
3. Reassembly requires carefully installing each part in reverse order, ensuring proper placement of seals, bearings, springs and other components. Special tools and procedures are specified to prevent injury.
Caterpillar Cat 336D L Excavator (Prefix ZML) Service Repair Manual (ZML00001...kesi7153062
1. The document provides instructions for disassembling and assembling a piston pump used in a hydraulic excavator fan.
2. The disassembly process involves using various tools to remove over 30 individual parts from the pump in sequential order.
3. Reassembly requires carefully installing each part in reverse order, ensuring proper placement of seals, bearings, springs and other components.
4. Cleanliness is emphasized throughout to prevent contamination during assembly.
Caterpillar Cat 336D L Excavator (Prefix ZML) Service Repair Manual (ZML00001...cnp692569
1. The document provides instructions for disassembling and assembling the piston pump (hydraulic fan) of an excavator.
2. The disassembly process involves removing 30 individual parts in 9 steps, taking care with spring-loaded components.
3. Reassembly requires properly cleaning, inspecting, and installing the 30 components in the reverse order of disassembly over 29 steps. Proper tooling and safety precautions are noted throughout.
Caterpillar cat 336 d l excavator (prefix mds) service repair manual (mds0000...dueikdkmem
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and swashplate. It then lists 27 steps to reassemble the pump, replacing components in the reverse order and taking precautions around spring-loaded parts. The instructions specify using the proper tools and cleaning parts thoroughly during assembly.
Caterpillar cat 336 d l excavator (prefix mds) service repair manual (mds0000...fjskekxcddmmme
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. The disassembly process involves using tools to remove components like bearings, seals, pistons and springs. The assembly process specifies 30 steps to reinstall these components in the proper order and includes ensuring correct shimming and end play. Precautions are provided to wear protective equipment when working with pressurized or spring-loaded parts.
Caterpillar cat 336 d l excavator (prefix mds) service repair manual (mds0000...cdfzxs
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It describes removing parts like the head, seals, bearings, pistons, and shaft. Cleanliness is important during disassembly and assembly. Various tools are required like retaining ring pliers and a bearing puller. The instructions specify installing parts in the reverse order of removal and refer to other sections for removing components like the fan prior to accessing the piston pump.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual Instant D...fijsekkdmdm2w
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings, seals, bearings, pistons and other components. The assembly process specifies cleaning parts and using tools and procedures to carefully install components like bearings, seals, springs, pins and plates in the correct order and orientation. Torques and end play are checked during assembly to ensure proper installation.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...f8uesjdkdmdm
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings, seals, bearings, pistons and other components. The assembly process specifies cleaning parts and provides 30 steps for installing components in the correct order and ensuring proper operation, including adjusting end play and installing springs and seals.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...f8uejkkdmdm8u
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and shaft. It then lists 27 steps to reassemble the pump, replacing components in the reverse order and taking precautions around spring-loaded parts. The instructions specify using the proper tools and cleaning parts thoroughly during assembly.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...f8uejkkdmdm8u
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and shaft. It then lists 27 steps to reassemble the pump, replacing components in the reverse order and taking precautions around spring-loaded parts. The instructions specify using the proper tools and cleaning parts thoroughly during assembly.
Caterpillar cat 336 d l excavator (prefix mds) service repair manual (mds0000...ikdkdmdm
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings, seals, bearings, pistons and other components. The assembly process specifies cleaning parts and provides 30 steps for installing components in the correct order and ensuring proper operation, including adjusting end play and installing springs and seals.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...8ufjsekddm8u
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and shaft. It then describes 28 steps to reassemble the pump by installing these components in the reverse order, taking precautions for any spring-loaded parts.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual Instant D...fujkskemdmdm4r
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings, seals, bearings, pistons and other components. The assembly process specifies cleaning parts and provides 30 steps for installing components in the correct order and ensuring proper operation, including adjusting end play and installing springs and seals.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual Instant D...ze3xiandiao
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings, seals, bearings, pistons and other components. The assembly process specifies cleaning parts and provides 30 steps for installing components in the correct order and ensuring proper operation, including adjusting end play and installing springs and seals.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...f7usuejkdkddm3
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and shaft. It then lists 27 steps to reassemble the pump, replacing components in the reverse order and taking precautions around spring-loaded parts. The instructions specify using the proper tools and cleaning parts thoroughly during assembly.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...ufjksemd8ujd
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings, seals, bearings, pistons and other components. The assembly process specifies cleaning parts and provides 30 steps for installing components in the correct order and ensuring proper operation, including adjusting end play and installing springs and seals.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...fujskmd9dokk
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and shaft. It then lists 27 steps to reassemble the pump, replacing components in the reverse order and taking precautions around spring-loaded parts. The instructions specify using the proper tools and cleaning parts thoroughly during assembly.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...km7seydwuhdw
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings, seals, bearings, pistons and other components. The assembly process specifies cleaning parts and provides 30 steps for installing components in the correct order and ensuring proper operation, including adjusting end play and installing springs and seals.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual Instant D...fskekkdmdmdm3e
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and shaft. It then lists 27 steps to reassemble the pump, replacing components in the reverse order and taking precautions around spring-loaded parts. The instructions specify using the proper tools and cleaning parts thoroughly during assembly.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...jdkskmdmdm
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and shaft. It then lists 27 steps to reassemble the pump, installing these components in reverse order while taking precautions for spring-loaded parts. The instructions specify using the proper tools and cleaning procedures.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...prmy389342
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and shaft. It then describes 28 steps to reassemble the pump by installing these components in the reverse order, taking precautions for any spring-loaded parts. The instructions specify using the proper tools and cleaning procedures.
Caterpillar cat 336 d l excavator (prefix mds) service repair manual (mds0000...fksjksmmde
The document provides instructions for disassembling and assembling a piston pump. Key steps include:
1. Removing various components like the head, O-rings, pistons, and bearings.
2. Using tools like retaining ring pliers and a driver group to remove springs and retaining rings.
3. Taking safety precautions as parts are under spring tension.
4. Cleaning all parts thoroughly before assembly.
Caterpillar Cat 336D2 L Excavator (Prefix YCF) Service Repair Manual (YCF0000...zatao0179249295
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) for Caterpillar 336D2 and 336D2 L excavators. The disassembly procedure involves using various tools to remove 30 individual parts from the pump in a specific order. The assembly procedure similarly lists 30 steps to reinstall the parts in reverse order, noting requirements for cleaning, heating/cooling parts, and warnings about spring-loaded components.
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) for Caterpillar 336D2 and 336D2 L excavators. The disassembly procedure involves using various tools to remove 30 individual parts from the pump in a specific order. The assembly procedure similarly lists 30 steps to reinstall the parts in reverse order, noting requirements for cleaning, heating/cooling parts, and warnings about spring-loaded components.
Caterpillar Cat 336D2 L Excavator (Prefix YCF) Service Repair Manual (YCF0000...luanxianshi27
The document provides instructions for disassembling and assembling a piston pump. It begins with instructions for removing the piston motor by bending locking tabs, removing bolts and the hub, and lifting the motor assembly off. The disassembly instructions then detail removing individual parts like the head, seals, plates, bearings, pistons, pins, and shims. The assembly instructions provide the reverse process and precautions for installing parts.
The document provides instructions for disassembling and assembling the piston pump (hydraulic fan) of Caterpillar 336D2 and 336D2 L excavators. The disassembly procedure involves removing 30 parts in 8 steps, taking precautions for spring-loaded parts. The assembly procedure reinstalls the parts in 30 steps, heating and cooling certain parts, using tools such as retaining ring pliers and a dial indicator, and ensuring proper shim thickness and end play. Precautions are given to prevent injury from spring-loaded parts.
Caterpillar Cat 336D2 L Excavator (Prefix YCF) Service Repair Manual (YCF0000...cnp692569
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) for Caterpillar 336D2 and 336D2 L excavators. The disassembly procedure involves removing 30 parts in 8 steps, taking precautions for spring-loaded parts. The assembly procedure reinstalls the parts in 30 steps, heating and cooling certain parts, using tools to install retaining rings and measure end play, and filling the hydraulic system.
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) for Caterpillar 336D2 and 336D2 L excavators. The disassembly procedure involves removing 30 parts in 8 steps, taking precautions for spring-loaded parts. The assembly procedure reinstalls the parts in 30 steps, heating and cooling certain parts, using tools to install retaining rings and measure end play, and filling the hydraulic system.
Caterpillar Cat 336F L Excavator (Prefix KCS) Service Repair Manual (KCS00001...cnp692569
The document provides instructions for removing and installing various components of a Caterpillar C9.3 engine, including the combustion head, ARD nozzle heater relay, ARD fuel solenoid valve, exhaust manifold, and exhaust elbow. The procedures include removing fasteners and connectors, loosening clamps, and installing replacement parts in the reverse order of removal while applying sealants and lubricants and torquing fasteners to the specified values. Safety precautions are provided regarding working on hot engine components and with flammable liquids.
1. The document provides step-by-step instructions for disassembling the travel motor of a 336F excavator.
2. It describes removing 27 components and parts from the travel motor in a specific sequence using various tools.
3. Special care must be taken when removing springs and components under pressure to avoid injury from released forces.
More Related Content
Similar to Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001 and up).pdf
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...f8uejkkdmdm8u
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and shaft. It then lists 27 steps to reassemble the pump, replacing components in the reverse order and taking precautions around spring-loaded parts. The instructions specify using the proper tools and cleaning parts thoroughly during assembly.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...f8uejkkdmdm8u
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and shaft. It then lists 27 steps to reassemble the pump, replacing components in the reverse order and taking precautions around spring-loaded parts. The instructions specify using the proper tools and cleaning parts thoroughly during assembly.
Caterpillar cat 336 d l excavator (prefix mds) service repair manual (mds0000...ikdkdmdm
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings, seals, bearings, pistons and other components. The assembly process specifies cleaning parts and provides 30 steps for installing components in the correct order and ensuring proper operation, including adjusting end play and installing springs and seals.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...8ufjsekddm8u
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and shaft. It then describes 28 steps to reassemble the pump by installing these components in the reverse order, taking precautions for any spring-loaded parts.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual Instant D...fujkskemdmdm4r
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings, seals, bearings, pistons and other components. The assembly process specifies cleaning parts and provides 30 steps for installing components in the correct order and ensuring proper operation, including adjusting end play and installing springs and seals.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual Instant D...ze3xiandiao
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings, seals, bearings, pistons and other components. The assembly process specifies cleaning parts and provides 30 steps for installing components in the correct order and ensuring proper operation, including adjusting end play and installing springs and seals.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...f7usuejkdkddm3
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and shaft. It then lists 27 steps to reassemble the pump, replacing components in the reverse order and taking precautions around spring-loaded parts. The instructions specify using the proper tools and cleaning parts thoroughly during assembly.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...ufjksemd8ujd
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings, seals, bearings, pistons and other components. The assembly process specifies cleaning parts and provides 30 steps for installing components in the correct order and ensuring proper operation, including adjusting end play and installing springs and seals.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...fujskmd9dokk
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and shaft. It then lists 27 steps to reassemble the pump, replacing components in the reverse order and taking precautions around spring-loaded parts. The instructions specify using the proper tools and cleaning parts thoroughly during assembly.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...km7seydwuhdw
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings, seals, bearings, pistons and other components. The assembly process specifies cleaning parts and provides 30 steps for installing components in the correct order and ensuring proper operation, including adjusting end play and installing springs and seals.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual Instant D...fskekkdmdmdm3e
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and shaft. It then lists 27 steps to reassemble the pump, replacing components in the reverse order and taking precautions around spring-loaded parts. The instructions specify using the proper tools and cleaning parts thoroughly during assembly.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...jdkskmdmdm
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and shaft. It then lists 27 steps to reassemble the pump, installing these components in reverse order while taking precautions for spring-loaded parts. The instructions specify using the proper tools and cleaning procedures.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...prmy389342
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and shaft. It then describes 28 steps to reassemble the pump by installing these components in the reverse order, taking precautions for any spring-loaded parts. The instructions specify using the proper tools and cleaning procedures.
Caterpillar cat 336 d l excavator (prefix mds) service repair manual (mds0000...fksjksmmde
The document provides instructions for disassembling and assembling a piston pump. Key steps include:
1. Removing various components like the head, O-rings, pistons, and bearings.
2. Using tools like retaining ring pliers and a driver group to remove springs and retaining rings.
3. Taking safety precautions as parts are under spring tension.
4. Cleaning all parts thoroughly before assembly.
Caterpillar Cat 336D2 L Excavator (Prefix YCF) Service Repair Manual (YCF0000...zatao0179249295
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) for Caterpillar 336D2 and 336D2 L excavators. The disassembly procedure involves using various tools to remove 30 individual parts from the pump in a specific order. The assembly procedure similarly lists 30 steps to reinstall the parts in reverse order, noting requirements for cleaning, heating/cooling parts, and warnings about spring-loaded components.
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) for Caterpillar 336D2 and 336D2 L excavators. The disassembly procedure involves using various tools to remove 30 individual parts from the pump in a specific order. The assembly procedure similarly lists 30 steps to reinstall the parts in reverse order, noting requirements for cleaning, heating/cooling parts, and warnings about spring-loaded components.
Caterpillar Cat 336D2 L Excavator (Prefix YCF) Service Repair Manual (YCF0000...luanxianshi27
The document provides instructions for disassembling and assembling a piston pump. It begins with instructions for removing the piston motor by bending locking tabs, removing bolts and the hub, and lifting the motor assembly off. The disassembly instructions then detail removing individual parts like the head, seals, plates, bearings, pistons, pins, and shims. The assembly instructions provide the reverse process and precautions for installing parts.
The document provides instructions for disassembling and assembling the piston pump (hydraulic fan) of Caterpillar 336D2 and 336D2 L excavators. The disassembly procedure involves removing 30 parts in 8 steps, taking precautions for spring-loaded parts. The assembly procedure reinstalls the parts in 30 steps, heating and cooling certain parts, using tools such as retaining ring pliers and a dial indicator, and ensuring proper shim thickness and end play. Precautions are given to prevent injury from spring-loaded parts.
Caterpillar Cat 336D2 L Excavator (Prefix YCF) Service Repair Manual (YCF0000...cnp692569
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) for Caterpillar 336D2 and 336D2 L excavators. The disassembly procedure involves removing 30 parts in 8 steps, taking precautions for spring-loaded parts. The assembly procedure reinstalls the parts in 30 steps, heating and cooling certain parts, using tools to install retaining rings and measure end play, and filling the hydraulic system.
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) for Caterpillar 336D2 and 336D2 L excavators. The disassembly procedure involves removing 30 parts in 8 steps, taking precautions for spring-loaded parts. The assembly procedure reinstalls the parts in 30 steps, heating and cooling certain parts, using tools to install retaining rings and measure end play, and filling the hydraulic system.
Similar to Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001 and up).pdf (20)
Caterpillar Cat 336F L Excavator (Prefix KCS) Service Repair Manual (KCS00001...cnp692569
The document provides instructions for removing and installing various components of a Caterpillar C9.3 engine, including the combustion head, ARD nozzle heater relay, ARD fuel solenoid valve, exhaust manifold, and exhaust elbow. The procedures include removing fasteners and connectors, loosening clamps, and installing replacement parts in the reverse order of removal while applying sealants and lubricants and torquing fasteners to the specified values. Safety precautions are provided regarding working on hot engine components and with flammable liquids.
1. The document provides step-by-step instructions for disassembling the travel motor of a 336F excavator.
2. It describes removing 27 components and parts from the travel motor in a specific sequence using various tools.
3. Special care must be taken when removing springs and components under pressure to avoid injury from released forces.
This document provides instructions for disassembling and assembling the travel motor of a 336F excavator. The disassembly process involves 30 steps to remove all components of the travel motor. The assembly process reverses the disassembly with 27 steps and requires various tools to reinstall components in the proper order and orientation. Precautions are outlined to prevent injury from spring forces.
The document provides instructions for removing and installing various components of a Caterpillar C9.3 engine, including the combustion head, ARD nozzle heater relay, ARD fuel solenoid valve, exhaust manifold, and exhaust elbow. The procedures include removing parts in the specified order, cleaning components, installing new gaskets and O-rings, and torquing fasteners to the specified values. Safety precautions are provided regarding working on hot engine components and with flammable liquids.
This document provides instructions for disassembling the travel motor on 336F and 336F L Excavator models. It outlines 27 steps to fully disassemble the travel motor, including removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and other internal parts. Precautions are provided to safely release stored energy from springs. Detailed illustrations accompany each step to ensure correct disassembly. Required tools are listed.
Caterpillar Cat 336E L HVG Excavator (Prefix RBS) Service Repair Manual (RBS0...cnp692569
The document provides instructions for installing and removing components related to the rear power take-off (RPTO) system on a Caterpillar C9.3 engine. The removal procedure includes removing the crankshaft rear seal, various bolts and gears, thrust washers, dowels, bearings, seals and the PTO shaft. The installation procedure specifies cleaning and lubricating parts before reinstalling components in reverse order, applying thread lock to bolts and torquing to specification.
Caterpillar Cat 336E L Excavator (Prefix YEP) Service Repair Manual (YEP00001...cnp692569
This document provides instructions for disassembling and assembling a travel motor. The disassembly process involves removing seals, bearings, springs and other components from the motor housing. The assembly process details installing these components in reverse order and applying lubricant or threadlock where specified. Proper torque values are listed for fasteners. The instructions note to mark components' orientations before removal to aid reinstallation.
Caterpillar Cat 336E L Excavator (Prefix KED) Service Repair Manual (KED00001...cnp692569
1. The document provides assembly instructions for a travel motor on an excavator. It details 28 steps to assemble the travel motor, including installing seals, springs, pistons, and other components.
2. Removal and installation instructions are provided for the final drive and travel motor assembly. 10 steps are outlined for removal, including draining oil, removing hoses and fittings, and using lifting tools. 13 steps are given for installation, with torque specifications for the reinstallation bolts.
3. Disassembly instructions for the final drive include removing the cover, plate, and links using lifting brackets and forcing bolts.
Caterpillar Cat 336E L Excavator (Prefix GTJ) Service Repair Manual (GTJ00001...cnp692569
The document provides instructions for disassembling and assembling a travel motor. It details 28 steps for travel motor assembly, including installing seals, springs, pistons and other components. Removal of the final drive and travel motor requires draining fluids, removing bolts and hoses, and lifting out the assembly. Reinstallation requires cleaning, applying sealant to bolts, and torquing bolts to the specified values.
The document provides instructions for installing and removing components related to the rear power take-off (RPTO) system on a Caterpillar C9.3 engine. The removal procedure includes removing the crankshaft rear seal, various bolts and gears, thrust washers, dowels, bearings, seals and the PTO shaft. The installation procedure specifies cleaning and lubricating parts before reinstalling components in reverse order, applying thread locking compound to bolts, and torquing bolts to the specified values.
This document provides instructions for disassembling and assembling the travel motor of a 336E excavator. It outlines 27 steps for disassembly, removing components like the head, springs, plates, seals and bearings. It then outlines 17 steps for assembly, replacing these components in reverse order and noting specifics like lubrication, torque settings and alignment marks. Tools required are listed.
1. The document provides assembly instructions for a travel motor on an excavator. It details 28 steps to assemble the travel motor, including installing seals, springs, pistons, and other components.
2. Removal and installation instructions are provided for the final drive and travel motor assembly of an excavator. The procedure includes disconnecting hoses, removing mounting bolts, and lifting out the assembly.
3. Disassembly instructions are given for a final drive, including removing the cover, plate, and installing lifting brackets to remove internal components. Detailed diagrams accompany each step.
The document provides instructions for disassembling and assembling a travel motor. It details 28 steps for disassembling the travel motor, removing components like seals, springs, and plates. It then lists 13 steps for reassembling the travel motor and tightening components like bolts, hoses, and covers to the specified torques.
Caterpillar Cat 336D2 L Excavator (Prefix ZCT) Service Repair Manual (ZCT0000...cnp692569
This document provides disassembly and assembly instructions for the main hydraulic pump on a 336D2 L excavator. It lists over 50 steps to fully disassemble the pump by removing covers, valves, springs, seals, gears, and other components. The corresponding assembly section lists the steps to reinstall all components in reverse order, noting requirements for special tools and heating/pressing some bearings and seals back into place. Precautions are included for releasing spring forces to avoid injury.
Caterpillar Cat 336D2 L Excavator (Prefix XBH) Service Repair Manual (XBH0000...cnp692569
This document provides instructions for installing and removing the final drive and travel motor, and disassembling and assembling the swivel, on Caterpillar 336D2 and 336D2 L excavators. The procedures include using various tools to lift heavy components, installing and tightening bolts, replacing O-rings and seals, and checking for leaks during assembly. Cleanliness is emphasized to prevent contamination.
Caterpillar Cat 336D2 L Excavator (Prefix WDC) Service Repair Manual (WDC0000...cnp692569
The document provides instructions for assembling and disassembling components of a piston motor (hydraulic fan) and hydraulic lockout control on excavator models 336D2 and 336D2 L. It describes 17 steps for assembling the piston motor, including installing bearings, seals, springs, and retaining rings. It also describes removing and disassembling the hydraulic lockout control into individual parts and reassembling it. Safety precautions are provided for parts under spring tension.
Caterpillar Cat 336D2 L Excavator (Prefix WBC) Service Repair Manual (WBC0000...cnp692569
The document provides instructions for removing and installing valve guides, valve seat inserts, an engine oil filter base, and oil cooler on a Caterpillar C9 engine. The removal procedures describe using various tools to remove the components from the cylinder head and engine. The installation sections explain cleaning and lubricating parts before reinstalling them using specific tools and following the correct procedure.
Caterpillar Cat 336D2 L Excavator (Prefix TLY) Service Repair Manual (TLY0000...cnp692569
The document provides instructions for disassembling and assembling a piston pump. It includes 30 steps for assembly, beginning with cleaning parts and ending by filling the hydraulic system with oil. The 3 steps for disassembly are: 1) removing bolts and the head, 2) removing internal components like pistons and bearings, and 3) using tools to remove the rotating group and bearing cone. Protective equipment is recommended as parts are under spring pressure.
Caterpillar Cat 336D2 L Excavator (Prefix LAM) Service Repair Manual (LAM0000...cnp692569
This document provides instructions for removing and installing the unit injector hydraulic pump on a Caterpillar C9 engine. The removal process involves disconnecting fuel lines and electrical connections, removing mounting bolts, and taking out the O-ring seal. Installation is the reverse of removal, and includes cleaning parts, applying a new O-ring seal, reinstalling mounting bolts, and reconnecting fuel lines and electrical connections. Proper cleaning and containment of fluids is emphasized. Both non-dual and dual tapered roller bearing pump types are covered.
Caterpillar Cat 336D2 L Excavator (Prefix GJA) Service Repair Manual (GJA0000...cnp692569
1. The document provides disassembly instructions for a 336D2 L excavator travel motor. It describes removing 27 components in 27 steps, including removing the motor head assembly, piston assemblies, barrel assembly, springs, seals, and more.
2. Detailed illustrations accompany each step to show how to position the motor, locate and remove parts, and properly use various tools.
3. Safety notices are included, warning of potential spring forces and the need for protective equipment during disassembly. Proper marking and positioning of parts is emphasized for reassembly.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D L EXCAVATOR MDS
Configuration: 336D L Excavator MDS00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02732015
Piston Pump (Hydraulic Fan) - Assemble
SMCS - 1387-016-QP; 5070-016-HFN
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
B 1P-1857 Retaining Ring Pliers 1
D 8T-5096 Dial Indicator Gp 1
Illustration 1 g01212915
1. Lower the temperature of bearing cup (49). Install bearing cup (49).
1/11
336D L Excavator MDS00001-UP (MACHINE) POWERED BY C9 Engine(SEBP56...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 2 g01212913
2. Install lip seal (48).
3. Use Tooling (B) in order to install retaining ring (47).
Illustration 3 g01213404
4. Raise the temperature of bearing cone (46).
5. Install bearing cone (46) onto shaft (45).
Illustration 4 g01213405
6. Install bearing cone (46), shaft (45), and bearing cone (31).
2/11
336D L Excavator MDS00001-UP (MACHINE) POWERED BY C9 Engine(SEBP56...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 5 g01213407
7. Lower the temperature of bearing cone (26). Install bearing cone (26).
Illustration 6 g01212900
8. Position head (23) onto the housing.
9. Install bolts (22).
Illustration 7 g01213409
10. Use Tooling (D) in order to determine the end play of shaft (45).
3/11
336D L Excavator MDS00001-UP (MACHINE) POWERED BY C9 Engine(SEBP56...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 8 g01212900
11. Remove bolts (22) and head (23).
Illustration 9 g01213405
12. Remove bearing cone (31).
Illustration 10 g01213433
13. Install bearings (44).
4/11
336D L Excavator MDS00001-UP (MACHINE) POWERED BY C9 Engine(SEBP56...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 11 g01212910
14. Install swashplate (43).
Illustration 12 g01373818
15. Install shim (40), spring (41), and shim (42) to barrel (38).
Illustration 13 g01212908
5/11
336D L Excavator MDS00001-UP (MACHINE) POWERED BY C9 Engine(SEBP56...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
16. Use Tooling (A), Tooling (B), and a suitable press in order to install retaining ring (39) into
barrel (38).
Illustration 14 g01212907
17. Install pins (37) into barrel (38).
Illustration 15 g01212906
18. Install bearing (36), retainer (35), and pistons (34).
6/11
336D L Excavator MDS00001-UP (MACHINE) POWERED BY C9 Engine(SEBP56...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 16 g01212905
19. Install rotating group (32) and shim (33).
Note: Shim thickness was determined on Step 9.
Illustration 17 g01212904
20. Install bearing cone (31).
Illustration 18 g01212903
21. Install piston (30).
7/11
336D L Excavator MDS00001-UP (MACHINE) POWERED BY C9 Engine(SEBP56...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 19 g01212902
22. Install spring (27), piston (29), and O-ring seal (28).
Illustration 20 g01213436
23. Install O-ring seals (24) and port plate (25).
Illustration 21 g01212900
8/11
336D L Excavator MDS00001-UP (MACHINE) POWERED BY C9 Engine(SEBP56...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
24. Install head (23) and bolts (22).
Illustration 22 g01212898
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
25. Install spool (15), poppet (16), spring (17), spring (18), shim (19), O-ring seal (20), and
housing (21) into housing (2).
26. Install retainer (7), spring (8), retainer (9), spool (10), O-ring seal (12), backup ring (11), O-
ring seal (13), and cartridge (14).
27. Install screw (6) into housing (2).
9/11
336D L Excavator MDS00001-UP (MACHINE) POWERED BY C9 Engine(SEBP56...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 23 g01212897
28. Install coil (4) and nut (5).
Illustration 24 g01212896
29. Install O-ring seals (3).
Illustration 25 g01212895
30. Install controller (2) and bolts (1).
End By:
10/11
336D L Excavator MDS00001-UP (MACHINE) POWERED BY C9 Engine(SEBP...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. a. Install the piston pump. Refer to Disassembly and Assembly, "Piston Pump (Hydraulic Fan)
- Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat May 16 01:08:20 UTC+0800 2020
11/11
336D L Excavator MDS00001-UP (MACHINE) POWERED BY C9 Engine(SEBP...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D L EXCAVATOR MDS
Configuration: 336D L Excavator MDS00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02424411
Piston Pump (Hydraulic Fan) - Install
SMCS - 1387-012-QP; 5070-012-HFN
Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned
in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts.
Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are
worn or damaged, use new parts for replacement.
Illustration 1 g01211400
1. Position piston pump (7) and install bolts (6).
2. Connect harness assembly (5).
3. Connect hose assemblies (3) and (4).
1/2
336D L Excavator MDS00001-UP (MACHINE) POWERED BY C9 Engine(SEBP56...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 2 g01211399
4. Connect hose assembly (2).
Illustration 3 g01206719
5. Close door (1).
6. Fill the hydraulic system with oil. Refer to Operation and Maintenance Manual, "Refill
Capacities".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat May 16 01:09:15 UTC+0800 2020
2/2
336D L Excavator MDS00001-UP (MACHINE) POWERED BY C9 Engine(SEBP56...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D L EXCAVATOR MDS
Configuration: 336D L Excavator MDS00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02415451
Piston Motor (Hydraulic Fan) - Remove
SMCS - 1386-011-QP; 5058-011-FM
Removal Procedure
Start By:
a. Remove the fan. Refer to Disassembly and Assembly, "Fan - Remove".
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the
component should be thoroughly cleaned. This will help to prevent dirt from entering the internal
mechanism.
Illustration 1 g01207415
1. Bend locking tabs (1) backward.
2. Remove bolts (2) and hub (3).
1/2
336D L Excavator MDS00001-UP (MACHINE) POWERED BY C9 Engine(SEBP56...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 2 g01207416
3. Use a suitable lifting device to position fan motor assembly (4) onto suitable cribbing. The
weight of fan motor assembly (4) is approximately 68 kg (150 lb).
Illustration 3 g01207418
4. Attach a suitable lifting device to piston motor (5). The weight of piston motor (5) is
approximately 23 kg (50 lb).
5. Remove bolts (6) and fan motor (5).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat May 16 01:10:11 UTC+0800 2020
2/2
336D L Excavator MDS00001-UP (MACHINE) POWERED BY C9 Engine(SEBP56...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D L EXCAVATOR MDS
Configuration: 336D L Excavator MDS00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02415272
Piston Motor (Hydraulic Fan) - Disassemble
SMCS - 1386-015-QP; 5058-015-FM; 5058-015-HFN
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9S-9152 Bearing Puller Gp 1
B 1P-1861 Retaining Ring Pliers 1
C 1P-0510 Driver Gp 1
Start By:
a. Remove the piston motor. Refer to Disassembly and Assembly, "Piston Motor (Hydraulic
Fan) - Remove".
1/7
336D L Excavator MDS00001-UP (MACHINE) POWERED BY C9 Engine(SEBP56...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 1 g01207275
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
1. Remove bolts (1) and head (2).
Illustration 2 g01207276
2. Remove O-ring seal (3), port plate (4), and bearing cup (5).
Illustration 3 g01207278
2/7
336D L Excavator MDS00001-UP (MACHINE) POWERED BY C9 Engine(SEBP56...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
3. Remove plug (6), sleeve (7), poppet (8), spring (9), poppet (10), and O-ring seal (11).
Illustration 4 g01207279
4. Remove bearing cone (12).
Illustration 5 g01207280
5. Remove shim (13) and rotating group (14).
3/7
336D L Excavator MDS00001-UP (MACHINE) POWERED BY C9 Engine(SEBP56...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 9 g01207284
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
9. Use Tooling (C) and Tooling (B) in order to remove retaining ring (19).
10. Remove shim (23), spring (22), and shim (21).
Illustration 10 g01207285
11. Remove swashplate (24) and shaft (25).
5/7
336D L Excavator MDS00001-UP (MACHINE) POWERED BY C9 Engine(SEBP56...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 11 g01207287
12. Use Tooling (A) in order to remove bearing cone (26) from shaft (25).
Illustration 12 g01207286
13. Use Tooling (C) in order to remove retaining ring (27).
14. Remove lip seal (28).
Illustration 13 g01207288
15. Remove bearing cup (29).
6/7
336D L Excavator MDS00001-UP (MACHINE) POWERED BY C9 Engine(SEBP56...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D L EXCAVATOR MDS
Configuration: 336D L Excavator MDS00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02415273
Piston Motor (Hydraulic Fan) - Assemble
SMCS - 1386-016-QP; 5058-016-FM; 5058-016-HFN
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
B 1P-1861 Retaining Ring Pliers 1
C 1P-0510 Driver Gp 1
Illustration 1 g01207288
1. Install bearing cup (29).
1/7
336D L Excavator MDS00001-UP (MACHINE) POWERED BY C9 Engine(SEBP56...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
26. Illustration 2 g01207286
2. Install lip seal (28).
3. Use Tooling (C) in order to install retaining ring (27).
Illustration 3 g01207624
4. Raise the temperature of bearing cone (26).
5. Install bearing cone (26) onto shaft (25).
Illustration 4 g01207285
6. Install shaft (25) and swashplate (24).
2/7
336D L Excavator MDS00001-UP (MACHINE) POWERED BY C9 Engine(SEBP56...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Illustration 5 g01207283
Illustration 6 g01207284
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
7. Install shim (21), spring (22), and shim (23).
8. Use Tooling (C) and Tooling (B) in order to install retaining ring (19).
3/7
336D L Excavator MDS00001-UP (MACHINE) POWERED BY C9 Engine(SEBP56...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
28. Illustration 7 g01207282
9. Install pins (18).
Illustration 8 g01207281
10. Install bearing (17).
11. Install pistons (15) and retainer (16).
Illustration 9 g01207280
12. Install rotating group (14) and shim (13).
4/7
336D L Excavator MDS00001-UP (MACHINE) POWERED BY C9 Engine(SEBP56...
2020/5/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...