The document provides instructions for servicing components of 336D and 336D L excavators, including:
1) Procedures for assembling the engine oil filter base, requiring installation of seals, plugs, and covers.
2) Steps for installing the engine oil filter base, including attaching hoses and bolting it into place.
3) Removing and installing the engine oil cooler and hydraulic oil cooler, describing lifting equipment needed and connection of hoses.
1. The document provides instructions for servicing parts of a 336D excavator, including installing an engine oil filter base, installing an engine oil cooler, and removing and installing a hydraulic oil cooler.
2. Steps are provided to clean parts, install valves, seals, and plugs into the engine oil filter base.
3. Instructions are given to install the engine oil filter base, connect hoses, and fill the engine with coolant.
Caterpillar Cat 336D L Excavator (Prefix KKT) Service Repair Manual (KKT00001...zatao0179249295
1. The document provides instructions for installing and removing various engine components on a 336D excavator, including the engine oil filter base, engine oil cooler, hydraulic oil cooler, and air cleaner.
2. The procedures describe cleaning parts, using proper tools, and connecting hoses and brackets in the specified order.
3. Technicians are advised to follow the steps carefully and use new replacement parts if old parts are worn or damaged.
Caterpillar Cat 336D L Excavator (Prefix KKT) Service Repair Manual (KKT00001...kesi7153062
1. The document provides instructions for installing and removing various engine components on a 336D excavator, including the engine oil filter base, engine oil cooler, hydraulic oil cooler, and air cleaner.
2. The procedures describe cleaning parts, using required tools, installing and removing gaskets, hoses, brackets, covers, and other components in a specified sequence.
3. Technicians are advised to follow the established procedures carefully and wear protective equipment when working with spring-loaded parts to prevent injury.
1. The document provides instructions for installing and removing various engine components on a 336D excavator, including the engine oil filter base, engine oil cooler, hydraulic oil cooler, and air cleaner.
2. The procedures describe cleaning parts, using required tools, installing and removing gaskets, hoses, brackets, covers, and other components in a specified sequence.
3. Technicians are advised to follow the established procedures carefully and wear protective equipment when working with spring-loaded parts to prevent injury.
1. The document provides instructions for servicing parts of a 336D excavator, including installing an engine oil filter base, installing an engine oil cooler, and removing and installing a hydraulic oil cooler.
2. Steps are provided to clean parts, install valves, seals, and plugs into the engine oil filter base.
3. Instructions are given to install the engine oil filter base, connect hoses, and fill the engine with coolant.
Caterpillar Cat 336D L Excavator (Prefix KKT) Service Repair Manual (KKT00001...cnp692569
1. The document provides instructions for servicing parts of a 336D excavator including the engine oil filter base, engine oil cooler, and hydraulic oil cooler.
2. The engine oil filter base installation instructions include cleaning parts and installing valves, springs, seals, and plugs.
3. Removal and installation of the engine oil cooler and hydraulic oil cooler requires cleaning parts and using lifting devices due to the heavy weight of the coolers.
The document provides instructions for removing and installing an engine oil filter base on a 336D LN excavator. It describes:
1) Removing various connectors, seals, valves, and plugs from the engine oil filter base during disassembly.
2) Assembling the engine oil filter base by installing the parts in reverse order of removal.
3) Installing the engine oil filter base on the engine, including attaching hoses and bolts.
1) The document provides instructions for removing and installing various engine components, including the engine oil filter base, engine oil cooler, hydraulic oil cooler, and air cleaner.
2) The procedures note that cleanliness is important and tools may be required for some removal and installation steps.
3) Technicians are advised to follow the steps carefully to correctly disassemble and reassemble the components.
1. The document provides instructions for servicing parts of a 336D excavator, including installing an engine oil filter base, installing an engine oil cooler, and removing and installing a hydraulic oil cooler.
2. Steps are provided to clean parts, install valves, seals, and plugs into the engine oil filter base.
3. Instructions are given to install the engine oil filter base, connect hoses, and fill the engine with coolant.
Caterpillar Cat 336D L Excavator (Prefix KKT) Service Repair Manual (KKT00001...zatao0179249295
1. The document provides instructions for installing and removing various engine components on a 336D excavator, including the engine oil filter base, engine oil cooler, hydraulic oil cooler, and air cleaner.
2. The procedures describe cleaning parts, using proper tools, and connecting hoses and brackets in the specified order.
3. Technicians are advised to follow the steps carefully and use new replacement parts if old parts are worn or damaged.
Caterpillar Cat 336D L Excavator (Prefix KKT) Service Repair Manual (KKT00001...kesi7153062
1. The document provides instructions for installing and removing various engine components on a 336D excavator, including the engine oil filter base, engine oil cooler, hydraulic oil cooler, and air cleaner.
2. The procedures describe cleaning parts, using required tools, installing and removing gaskets, hoses, brackets, covers, and other components in a specified sequence.
3. Technicians are advised to follow the established procedures carefully and wear protective equipment when working with spring-loaded parts to prevent injury.
1. The document provides instructions for installing and removing various engine components on a 336D excavator, including the engine oil filter base, engine oil cooler, hydraulic oil cooler, and air cleaner.
2. The procedures describe cleaning parts, using required tools, installing and removing gaskets, hoses, brackets, covers, and other components in a specified sequence.
3. Technicians are advised to follow the established procedures carefully and wear protective equipment when working with spring-loaded parts to prevent injury.
1. The document provides instructions for servicing parts of a 336D excavator, including installing an engine oil filter base, installing an engine oil cooler, and removing and installing a hydraulic oil cooler.
2. Steps are provided to clean parts, install valves, seals, and plugs into the engine oil filter base.
3. Instructions are given to install the engine oil filter base, connect hoses, and fill the engine with coolant.
Caterpillar Cat 336D L Excavator (Prefix KKT) Service Repair Manual (KKT00001...cnp692569
1. The document provides instructions for servicing parts of a 336D excavator including the engine oil filter base, engine oil cooler, and hydraulic oil cooler.
2. The engine oil filter base installation instructions include cleaning parts and installing valves, springs, seals, and plugs.
3. Removal and installation of the engine oil cooler and hydraulic oil cooler requires cleaning parts and using lifting devices due to the heavy weight of the coolers.
The document provides instructions for removing and installing an engine oil filter base on a 336D LN excavator. It describes:
1) Removing various connectors, seals, valves, and plugs from the engine oil filter base during disassembly.
2) Assembling the engine oil filter base by installing the parts in reverse order of removal.
3) Installing the engine oil filter base on the engine, including attaching hoses and bolts.
1) The document provides instructions for removing and installing various engine components, including the engine oil filter base, engine oil cooler, hydraulic oil cooler, and air cleaner.
2) The procedures note that cleanliness is important and tools may be required for some removal and installation steps.
3) Technicians are advised to follow the steps carefully to correctly disassemble and reassemble the components.
This document provides instructions for removing and installing various engine components on a Caterpillar C9 Industrial Engine, including:
1. Valves, valve guides, and valve seat inserts. It describes using specialized tools to compress springs and extract/install parts.
2. The engine oil filter base, oil cooler, and oil pump. It emphasizes cleaning parts and contains fluids properly during removal and installation.
3. Safety precautions are provided, such as wearing protective equipment when working with spring-loaded parts and ensuring contaminants are avoided. Numerical sequences and specifications are given for installing certain parts correctly.
This document provides instructions for removing and installing an engine oil filter base and oil cooler from a Caterpillar C9 Industrial Engine. It outlines the necessary tools and safety precautions before describing the 4 step removal process which includes draining coolant, removing the oil filter and bolts, and removing the base and cooler. The 3 step installation process describes reinstalling the gasket, base, and bolts before refilling the cooling system.
This document provides instructions for removing and installing various engine components on a Caterpillar C27 Industrial Engine, including:
1) Valves, springs, and related parts using specialized tools to compress springs.
2) Valve guides using a driver tool and ensuring proper height.
3) Valve seat inserts using an extractor tool and driver to install new inserts.
4) The engine oil filter base and related internal parts, noting any spring pressure hazards.
Caterpillar Cat 345D L Excavator (Prefix PBT) Service Repair Manual (PBT00001...f8sejdkdmdijd
The document provides step-by-step instructions for disassembling and assembling the swing drive of a 345D L excavator. It lists 32 steps for disassembly, removing components like the carrier assembly, ring gear, and bearings. It then lists 13 steps for assembly, providing notes on cleanliness and replacing seals, O-rings, and other components. Tools required are also listed.
Caterpillar Cat 345D L Excavator (Prefix KFH) Service Repair Manual (KFH00001...f8sejdkdmdijd
1. The document provides instructions for removing and installing the rear gear group and flywheel on a C13 engine.
2. It details the required tools and presents a step-by-step process with illustrations for disassembling and assembling these components.
3. Proper installation requires using specific tools to install components like bearings at the correct temperature and orientation.
This document provides instructions for removing and installing an engine oil filter base and oil cooler from a Caterpillar C9 Industrial Engine. It outlines the necessary tools and safety precautions before describing the 4 step removal process and 4 step installation process. Separate sections also provide instructions for disassembling, assembling, removing and installing the engine oil pump.
Caterpillar Cat 345C L Hydraulic Excavator (Prefix ESD) Service Repair Manual...f8sejdkdmdijd
The document provides instructions for disassembling and assembling a travel motor. It is a 31 step process that includes removing components like the head, brake piston, disks, and seals. Tools required are listed. Cleanliness is emphasized to prevent contamination of hydraulic components. Used parts should be replaced, and new seals and O-rings installed.
Caterpillar Cat 345D L Excavator (Prefix BYC) Service Repair Manual (BYC00001...f8sejdkdmdijd
This document provides instructions for removing and installing various components of the rear gear group and flywheel on a C13 engine, including:
- Removing the rear gear group which involves taking out multiple gears, covers, seals, and bearings.
- Removing the flywheel which requires lifting equipment due to its weight and removing the ring gear.
- Installing the rear gear group and flywheel components in reverse order, noting specific instructions for installing seals and bearings. Tools and torque specifications are provided.
Caterpillar Cat 345C L Excavator (Prefix BWY) Service Repair Manual (BWY00001...f8sejdkdmdijd
This document provides instructions for disassembling and assembling a travel motor. The disassembly procedure involves 31 steps to remove all components of the travel motor. Key steps include using tools to remove the head, brake piston, rotating group, seals and other parts. The assembly procedure reverses the disassembly process in 30 steps and provides notes on cleaning, lubricating and installing parts in their original locations.
Caterpillar Cat 345C L Excavator (Prefix TBA) Service Repair Manual (TBA00001...f8sejdkdmdijd
This document provides instructions for disassembling and assembling a travel motor. The disassembly procedure involves 31 steps to remove parts like the head, pins, plates, seals, pistons, disks, and bearings. The assembly procedure reverses the disassembly process in 30 steps and provides notes about cleaning parts, applying lubricant, and ensuring proper orientation of components like washers. Tools required are listed for both procedures.
Caterpillar Cat 336D L Excavator (Prefix W3K) Service Repair Manual (W3K00001...f8sejdkdmdijd
This document provides instructions for disassembling and assembling a travel motor. It lists 28 steps for disassembly that involve removing components like the head, O-rings, springs, plates, and seals. The assembly section lists 28 corresponding steps to reinstall these components in reverse order, noting to clean parts thoroughly, apply lubricant, and ensure proper positioning of marked components. Special tools are listed that may be required for tasks like removing races and installing seals and rings. Proper torque values and safety precautions are also provided.
Caterpillar Cat 336E L Excavator (Prefix TEG) Service Repair Manual (TEG00001...f8sejdkdmdijd
This document provides the disassembly and assembly procedures for the travel motor of a 336E excavator. The disassembly procedure involves 27 steps to remove components such as the head, springs, brake piston, plates, and seals. The assembly procedure reverses the disassembly steps and includes lubricating components before installing them and noting alignment marks to ensure correct positioning. Special safety precautions and tools are listed for components under spring force.
The document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Draining the final drive oil and disconnecting hydraulic hoses before removing bolts to separate the final drive and travel motor assembly from the frame.
2) Attaching lifting equipment to remove the assembly and travel motor, noting orientation marks for reinstallation.
3) Reinstalling the components by reversing the removal steps and tightening bolts to specified torques.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual (JRX00001...f8sejdkdmdijd
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The disassembly procedure involves 25 steps to remove components such as gears, seals, springs, and housings. The assembly procedure describes 22 steps and requires various tools to reinstall the components in reverse order. Precautions are provided for releasing spring forces and proper torque specifications.
Caterpillar Cat 336D2 L Excavator (Prefix LAM) Service Repair Manual (LAM0000...f8sejdkdmdijd
This document provides instructions for removing and installing the unit injector sleeve and unit injector hydraulic pump on a Caterpillar C9 engine. The removal process involves draining coolant, cutting threads in the unit injector sleeve using specialized tools, and pulling the sleeve out. Installation requires cleaning parts, applying seals and retaining compound, and hammering the sleeve back in. Reinstallation of the hydraulic pump involves connecting tubes and hoses, and securing it with bolts.
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps to disassemble the motor by removing components like the head, plates, seals, pins, pistons and housing pieces. It notes to mark parts locations and clean components. Reassembly follows the reverse order, noting to reinstall parts in their original locations and orientations. Proper cleaning is important to prevent contaminating the hydraulic system.
1. The document provides installation instructions for an implement pump on a D8T track-type tractor. It details 34 steps for installing various parts like valves, springs, seals and bearings into the pump housing.
2. Proper cleaning and lubrication of parts is emphasized before assembly. Tools needed are listed. Precautions are given for working with spring loaded parts to prevent injury.
3. Once assembled, the pump is attached to the tractor using bolts and hoses are connected to the manifold.
Caterpillar Cat 336D L Excavator (Prefix KKT) Service Repair Manual (KKT00001...f8sejdkdmdijd
The document provides instructions for removing and installing various engine components on Caterpillar 336D and 336D L excavators, including:
1) Removing and installing the engine oil filter base in 3 steps.
2) Removing and installing the engine oil cooler in 2 steps.
3) Removing and installing the hydraulic oil cooler in 5 steps.
4) Removing and installing the air cleaner in 6 steps.
Caterpillar Cat 336D2 L Excavator (Prefix LAH) Service Repair Manual (LAH0000...f8sejdkdmdijd
1) The document provides disassembly instructions for a travel motor on an excavator model 336D2 L.
2) It describes 27 steps to disassemble the various components of the travel motor, including removing the motor head assembly, piston assemblies, barrel assembly, springs and seals.
3) Precautions are provided to watch for spring forces and ensure components are marked for correct reassembly.
Caterpillar Cat 336E L Excavator (Prefix KED) Service Repair Manual (KED00001...f8sejdkdmdijd
The document provides instructions for disassembling and assembling a travel motor. It is a 28 step process that includes removing parts like seals, bearings, springs and installing them in reverse order. Precautions are outlined for spring loaded parts that could cause injury. Tools required are listed in tables at the beginning and end.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
This document provides instructions for removing and installing various engine components on a Caterpillar C9 Industrial Engine, including:
1. Valves, valve guides, and valve seat inserts. It describes using specialized tools to compress springs and extract/install parts.
2. The engine oil filter base, oil cooler, and oil pump. It emphasizes cleaning parts and contains fluids properly during removal and installation.
3. Safety precautions are provided, such as wearing protective equipment when working with spring-loaded parts and ensuring contaminants are avoided. Numerical sequences and specifications are given for installing certain parts correctly.
This document provides instructions for removing and installing an engine oil filter base and oil cooler from a Caterpillar C9 Industrial Engine. It outlines the necessary tools and safety precautions before describing the 4 step removal process which includes draining coolant, removing the oil filter and bolts, and removing the base and cooler. The 3 step installation process describes reinstalling the gasket, base, and bolts before refilling the cooling system.
This document provides instructions for removing and installing various engine components on a Caterpillar C27 Industrial Engine, including:
1) Valves, springs, and related parts using specialized tools to compress springs.
2) Valve guides using a driver tool and ensuring proper height.
3) Valve seat inserts using an extractor tool and driver to install new inserts.
4) The engine oil filter base and related internal parts, noting any spring pressure hazards.
Caterpillar Cat 345D L Excavator (Prefix PBT) Service Repair Manual (PBT00001...f8sejdkdmdijd
The document provides step-by-step instructions for disassembling and assembling the swing drive of a 345D L excavator. It lists 32 steps for disassembly, removing components like the carrier assembly, ring gear, and bearings. It then lists 13 steps for assembly, providing notes on cleanliness and replacing seals, O-rings, and other components. Tools required are also listed.
Caterpillar Cat 345D L Excavator (Prefix KFH) Service Repair Manual (KFH00001...f8sejdkdmdijd
1. The document provides instructions for removing and installing the rear gear group and flywheel on a C13 engine.
2. It details the required tools and presents a step-by-step process with illustrations for disassembling and assembling these components.
3. Proper installation requires using specific tools to install components like bearings at the correct temperature and orientation.
This document provides instructions for removing and installing an engine oil filter base and oil cooler from a Caterpillar C9 Industrial Engine. It outlines the necessary tools and safety precautions before describing the 4 step removal process and 4 step installation process. Separate sections also provide instructions for disassembling, assembling, removing and installing the engine oil pump.
Caterpillar Cat 345C L Hydraulic Excavator (Prefix ESD) Service Repair Manual...f8sejdkdmdijd
The document provides instructions for disassembling and assembling a travel motor. It is a 31 step process that includes removing components like the head, brake piston, disks, and seals. Tools required are listed. Cleanliness is emphasized to prevent contamination of hydraulic components. Used parts should be replaced, and new seals and O-rings installed.
Caterpillar Cat 345D L Excavator (Prefix BYC) Service Repair Manual (BYC00001...f8sejdkdmdijd
This document provides instructions for removing and installing various components of the rear gear group and flywheel on a C13 engine, including:
- Removing the rear gear group which involves taking out multiple gears, covers, seals, and bearings.
- Removing the flywheel which requires lifting equipment due to its weight and removing the ring gear.
- Installing the rear gear group and flywheel components in reverse order, noting specific instructions for installing seals and bearings. Tools and torque specifications are provided.
Caterpillar Cat 345C L Excavator (Prefix BWY) Service Repair Manual (BWY00001...f8sejdkdmdijd
This document provides instructions for disassembling and assembling a travel motor. The disassembly procedure involves 31 steps to remove all components of the travel motor. Key steps include using tools to remove the head, brake piston, rotating group, seals and other parts. The assembly procedure reverses the disassembly process in 30 steps and provides notes on cleaning, lubricating and installing parts in their original locations.
Caterpillar Cat 345C L Excavator (Prefix TBA) Service Repair Manual (TBA00001...f8sejdkdmdijd
This document provides instructions for disassembling and assembling a travel motor. The disassembly procedure involves 31 steps to remove parts like the head, pins, plates, seals, pistons, disks, and bearings. The assembly procedure reverses the disassembly process in 30 steps and provides notes about cleaning parts, applying lubricant, and ensuring proper orientation of components like washers. Tools required are listed for both procedures.
Caterpillar Cat 336D L Excavator (Prefix W3K) Service Repair Manual (W3K00001...f8sejdkdmdijd
This document provides instructions for disassembling and assembling a travel motor. It lists 28 steps for disassembly that involve removing components like the head, O-rings, springs, plates, and seals. The assembly section lists 28 corresponding steps to reinstall these components in reverse order, noting to clean parts thoroughly, apply lubricant, and ensure proper positioning of marked components. Special tools are listed that may be required for tasks like removing races and installing seals and rings. Proper torque values and safety precautions are also provided.
Caterpillar Cat 336E L Excavator (Prefix TEG) Service Repair Manual (TEG00001...f8sejdkdmdijd
This document provides the disassembly and assembly procedures for the travel motor of a 336E excavator. The disassembly procedure involves 27 steps to remove components such as the head, springs, brake piston, plates, and seals. The assembly procedure reverses the disassembly steps and includes lubricating components before installing them and noting alignment marks to ensure correct positioning. Special safety precautions and tools are listed for components under spring force.
The document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Draining the final drive oil and disconnecting hydraulic hoses before removing bolts to separate the final drive and travel motor assembly from the frame.
2) Attaching lifting equipment to remove the assembly and travel motor, noting orientation marks for reinstallation.
3) Reinstalling the components by reversing the removal steps and tightening bolts to specified torques.
Caterpillar Cat 336D L Excavator (Prefix JRX) Service Repair Manual (JRX00001...f8sejdkdmdijd
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The disassembly procedure involves 25 steps to remove components such as gears, seals, springs, and housings. The assembly procedure describes 22 steps and requires various tools to reinstall the components in reverse order. Precautions are provided for releasing spring forces and proper torque specifications.
Caterpillar Cat 336D2 L Excavator (Prefix LAM) Service Repair Manual (LAM0000...f8sejdkdmdijd
This document provides instructions for removing and installing the unit injector sleeve and unit injector hydraulic pump on a Caterpillar C9 engine. The removal process involves draining coolant, cutting threads in the unit injector sleeve using specialized tools, and pulling the sleeve out. Installation requires cleaning parts, applying seals and retaining compound, and hammering the sleeve back in. Reinstallation of the hydraulic pump involves connecting tubes and hoses, and securing it with bolts.
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps to disassemble the motor by removing components like the head, plates, seals, pins, pistons and housing pieces. It notes to mark parts locations and clean components. Reassembly follows the reverse order, noting to reinstall parts in their original locations and orientations. Proper cleaning is important to prevent contaminating the hydraulic system.
1. The document provides installation instructions for an implement pump on a D8T track-type tractor. It details 34 steps for installing various parts like valves, springs, seals and bearings into the pump housing.
2. Proper cleaning and lubrication of parts is emphasized before assembly. Tools needed are listed. Precautions are given for working with spring loaded parts to prevent injury.
3. Once assembled, the pump is attached to the tractor using bolts and hoses are connected to the manifold.
Caterpillar Cat 336D L Excavator (Prefix KKT) Service Repair Manual (KKT00001...f8sejdkdmdijd
The document provides instructions for removing and installing various engine components on Caterpillar 336D and 336D L excavators, including:
1) Removing and installing the engine oil filter base in 3 steps.
2) Removing and installing the engine oil cooler in 2 steps.
3) Removing and installing the hydraulic oil cooler in 5 steps.
4) Removing and installing the air cleaner in 6 steps.
Caterpillar Cat 336D2 L Excavator (Prefix LAH) Service Repair Manual (LAH0000...f8sejdkdmdijd
1) The document provides disassembly instructions for a travel motor on an excavator model 336D2 L.
2) It describes 27 steps to disassemble the various components of the travel motor, including removing the motor head assembly, piston assemblies, barrel assembly, springs and seals.
3) Precautions are provided to watch for spring forces and ensure components are marked for correct reassembly.
Caterpillar Cat 336E L Excavator (Prefix KED) Service Repair Manual (KED00001...f8sejdkdmdijd
The document provides instructions for disassembling and assembling a travel motor. It is a 28 step process that includes removing parts like seals, bearings, springs and installing them in reverse order. Precautions are outlined for spring loaded parts that could cause injury. Tools required are listed in tables at the beginning and end.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D EXCAVATOR KKT
Configuration: 336D & 336D L Excavators KKT00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit C9 Engine Supplement
Media Number -RENR8647-16 Publication Date -01/10/2015 Date Updated -26/10/2015
i02417236
Engine Oil Filter Base - Assemble
SMCS - 1306-016; 1306
Assembly Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned
in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts.
Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are
worn or damaged, use new parts for replacement.
1/3
336D & 336D L Excavators KKT00001-UP (MACHINE) POWERED BY C9 Engine(...
2020/8/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g01208235
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
2/3
336D & 336D L Excavators KKT00001-UP (MACHINE) POWERED BY C9 Engine(...
2020/8/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. 1. Install valve (7), spring (6), O-ring seal (5), and plug (4) into engine oil filter base (1).
2. Install valve (8), spring (9), O-ring seal (11), and plug (13) into engine oil filter base (1).
3. Install O-ring seal (3) and plug (2).
4. Install O-ring seal (10) and adapter (12).
5. Install O-ring seal (15) and connector (14).
6. Install stud (17).
7. Install O-ring seal (16) and cover (18).
8. Install O-ring seal (19) and connector (20).
End By:
a. Install the engine oil filter base. Refer to Disassembly and Assembly, "Engine Oil Filter
Base - Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Aug 24 18:36:53 UTC+0800 2020
3/3
336D & 336D L Excavators KKT00001-UP (MACHINE) POWERED BY C9 Engine(...
2020/8/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D EXCAVATOR KKT
Configuration: 336D & 336D L Excavators KKT00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit C9 Engine Supplement
Media Number -RENR8647-16 Publication Date -01/10/2015 Date Updated -26/10/2015
i02417231
Engine Oil Filter Base - Install
SMCS - 1306-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A -
Guide Stud
M8 - 1.25 by 65 mm
2
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned
in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts.
Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are
worn or damaged, use new parts for replacement.
Illustration 1 g01208181
1/4
336D & 336D L Excavators KKT00001-UP (MACHINE) POWERED BY C9 Engine(...
2020/8/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. 1. Install the gasket and engine oil filter base (10) over Tooling (A).
2. Install bolts (9).
Illustration 2 g01208179
Illustration 3 g01208224
3. Remove Tooling (A) and install bolts (8). Refer to Illustration 3 for the correct tightening
sequence.
2/4
336D & 336D L Excavators KKT00001-UP (MACHINE) POWERED BY C9 Engine(...
2020/8/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 4 g01208178
4. Connect hose assemblies (6) and (7).
Illustration 5 g01208176
5. Install hose (5).
Illustration 6 g01208119
6. Close engine hood (4).
3/4
336D & 336D L Excavators KKT00001-UP (MACHINE) POWERED BY C9 Engine(...
2020/8/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 7 g01208173
7. Connect hose assembly (3).
Illustration 8 g01208170
8. Raise guard (2) and install bolts (1).
9. fill the engine with coolant. Refer to Operation and Maintenance Manual, "Refill
Capacities".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Aug 24 18:37:49 UTC+0800 2020
4/4
336D & 336D L Excavators KKT00001-UP (MACHINE) POWERED BY C9 Engine(...
2020/8/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D EXCAVATOR KKT
Configuration: 336D & 336D L Excavators KKT00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit C9 Engine Supplement
Media Number -RENR8647-16 Publication Date -01/10/2015 Date Updated -26/10/2015
i02417228
Engine Oil Cooler - Remove and Install
SMCS - 1378-010
Removal Procedure
Start By:
a. Remove the engine oil filter base. Refer to Disassembly and Assembly, "Engine Oil Filter
Base - Remove".
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the
component should be thoroughly cleaned. This will help to prevent dirt from entering the internal
mechanism.
Illustration 1 g01208148
1. Remove gasket (1) and engine oil cooler (2).
Installation Procedure
1/2
336D & 336D L Excavators KKT00001-UP (MACHINE) POWERED BY C9 Engine(...
2020/8/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned
in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts.
Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are
worn or damaged, use new parts for replacement.
Illustration 2 g01208148
1. Install engine oil cooler (2) and gasket (1).
End By:
a. Install the engine oil filter base. Refer to Disassembly and Assembly, "Engine Oil Filter
Base - Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Aug 24 18:38:45 UTC+0800 2020
2/2
336D & 336D L Excavators KKT00001-UP (MACHINE) POWERED BY C9 Engine(...
2020/8/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D EXCAVATOR KKT
Configuration: 336D & 336D L Excavators KKT00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit C9 Engine Supplement
Media Number -RENR8647-16 Publication Date -01/10/2015 Date Updated -26/10/2015
i02415509
Hydraulic Oil Cooler - Remove and Install
SMCS - 1374-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 189-0408 Shackle As 2
Start By:
a. Remove the fan group. Refer to Disassembly and Assembly, "Fan Group (Includes Fan, Fan
Guard, Fan Shroud, and Hydraulic Fan Motor) - Remove".
Illustration 1 g01207524
1. Remove hose (1), bolts (2), and plate (3).
1/5
336D & 336D L Excavators KKT00001-UP (MACHINE) POWERED BY C9 Engine(...
2020/8/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 2 g01207525
2. Remove bolts (4) and bracket (5).
Illustration 3 g01207526
3. Attach Tooling (A) and a suitable lifting device to hydraulic oil cooler (6). The weight of
hydraulic oil cooler (6) is approximately 68 kg (150 lb).
4. Remove bolt (7).
Illustration 4 g01207527
5. Remove bolts (8).
2/5
336D & 336D L Excavators KKT00001-UP (MACHINE) POWERED BY C9 Engine(...
2020/8/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 5 g01207528
6. Use the suitable lifting device to remove hydraulic oil cooler (6).
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 189-0408 Shackle As 2
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned
in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts.
Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are
worn or damaged, use new parts for replacement.
Illustration 6 g01207528
1. Use Tooling (A) and a suitable lifting device to position hydraulic oil cooler (6). The weight
of hydraulic oil cooler (6) is approximately 68 kg (150 lb).
3/5
336D & 336D L Excavators KKT00001-UP (MACHINE) POWERED BY C9 Engine(...
2020/8/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 7 g01207527
2. Install bolts (8).
Illustration 8 g01207526
3. Install bolt (7) and remove Tooling (A) from hydraulic oil cooler (6).
Illustration 9 g01207525
4. Install bracket (5) and bolts (4).
4/5
336D & 336D L Excavators KKT00001-UP (MACHINE) POWERED BY C9 Engine(...
2020/8/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 10 g01207524
5. Install plate (3), bolts (2), and hose (1).
End By:
a. Install the fan group. Refer to Disassembly and Assembly, "Fan Group (Includes Fan, Fan
Guard, Fan Shroud, and Hydraulic Fan Motor) - Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Aug 24 18:39:40 UTC+0800 2020
5/5
336D & 336D L Excavators KKT00001-UP (MACHINE) POWERED BY C9 Engine(...
2020/8/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D EXCAVATOR KKT
Configuration: 336D & 336D L Excavators KKT00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit C9 Engine Supplement
Media Number -RENR8647-16 Publication Date -01/10/2015 Date Updated -26/10/2015
i02412726
Air Cleaner - Remove and Install
SMCS - 1051-010; 1054-010
Removal Procedure
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the
component should be thoroughly cleaned. This will help to prevent dirt from entering the internal
mechanism.
Illustration 1 g01205948
1. Open doors (2) and (1).
1/6
336D & 336D L Excavators KKT00001-UP (MACHINE) POWERED BY C9 Engine(...
2020/8/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 2 g01206308
2. Remove cover (3).
Illustration 3 g01206309
Illustration 4 g01206310
3. Remove primary filter element (4) and secondary filter element (5).
2/6
336D & 336D L Excavators KKT00001-UP (MACHINE) POWERED BY C9 Engine(...
2020/8/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 5 g01206311
4. Disconnect hose (6) from the back of air cleaner assembly (7).
Illustration 6 g01206312
5. Remove bolts (8) and air cleaner assembly (7).
Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned
in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts.
Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are
worn or damaged, use new parts for replacement.
3/6
336D & 336D L Excavators KKT00001-UP (MACHINE) POWERED BY C9 Engine(...
2020/8/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 7 g01206312
1. Install air cleaner assembly (7) and bolts (8).
Illustration 8 g01206311
2. Connect hose (6) to the back of air cleaner assembly (7).
Illustration 9 g01206310
4/6
336D & 336D L Excavators KKT00001-UP (MACHINE) POWERED BY C9 Engine(...
2020/8/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 10 g01206309
3. Install secondary filter element (5) and primary filter element (4).
Illustration 11 g01206308
4. Install cover (3).
Illustration 12 g01205948
5. Close doors (1) and (2).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Mon Aug 24 18:40:36 UTC+0800 2020
5/6
336D & 336D L Excavators KKT00001-UP (MACHINE) POWERED BY C9 Engine(...
2020/8/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D EXCAVATOR KKT
Configuration: 336D & 336D L Excavators KKT00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit C9 Engine Supplement
Media Number -RENR8647-16 Publication Date -01/10/2015 Date Updated -26/10/2015
i02412735
Ether Start Valve - Remove and Install
SMCS - 1456-010-VL
Removal Procedure
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the
component should be thoroughly cleaned. This will help to prevent dirt from entering the internal
mechanism.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for
installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this
helps to keep contaminants from entering the system.
Illustration 1 g01205948
1. Open doors (2) and (1).
1/3
336D & 336D L Excavators KKT00001-UP (MACHINE) POWERED BY C9 Engine(...
2020/8/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 2 g01205972
2. Disconnect harness assembly (3) and tube assembly (6).
3. Remove bolts (4) and ether start valve (5).
Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned
in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts.
Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are
worn or damaged, use new parts for replacement.
Illustration 3 g01205972
1. Position ether start valve (5) and install bolts (4).
2. Connect harness assembly (3) and tube assembly (6).
2/3
336D & 336D L Excavators KKT00001-UP (MACHINE) POWERED BY C9 Engine(...
2020/8/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 4 g01205948
3. Close doors (1) and (2).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Aug 24 18:41:32 UTC+0800 2020
3/3
336D & 336D L Excavators KKT00001-UP (MACHINE) POWERED BY C9 Engine(...
2020/8/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D EXCAVATOR KKT
Configuration: 336D & 336D L Excavators KKT00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit C9 Engine Supplement
Media Number -RENR8647-16 Publication Date -01/10/2015 Date Updated -26/10/2015
i02414155
Aftercooler - Remove
SMCS - 1063-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 140-7742 Sleeve 2
B 189-0408 Shackle As 2
Start By:
a. Remove the cooling system package enclosure. Refer to Disassembly and Assembly,
"Enclosure (Cooling System Package) - Remove".
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the
component should be thoroughly cleaned. This will help to prevent dirt from entering the internal
mechanism.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for
installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this
helps to keep contaminants from entering the system.
1/6
336D & 336D L Excavators KKT00001-UP (MACHINE) POWERED BY C9 Engine(...
2020/8/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
26. Illustration 1 g01207070
1. Remove bolts (1) and guard (2).
Illustration 2 g01207071
2. Attach Tooling (A) and a suitable lifting device to door (3). The weight of door (3) is
approximately 41 kg (90 lb).
3. Remove bolts (4) and door (3).
Illustration 3 g01207072
4. Disconnect hoses (5).
2/6
336D & 336D L Excavators KKT00001-UP (MACHINE) POWERED BY C9 Engine(...
2020/8/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...