Caterpillar Cat 336 Excavator (Prefix GDY) Service Repair Manual Instant Download.pdf

•

0 likes•2 views

The document provides instructions for removing and installing components on a 336 excavator, including the operator monitor, hydraulic lockout control, and piston motor. It lists the required tools and includes illustrations showing the component locations and step-by-step removal and installation procedures. Safety warnings are provided to prevent injury when working with spring loaded parts. The document also identifies the excavator model and powered engine to ensure the correct repair manual is referenced.

Automotive

Service Repair Manual
Models
336 Excavator

Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336 EXCAVATOR GDY
Configuration: 336 Excavator GDY00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336 Excavator Machine Systems
Media Number -M0087649-02 Publication Date -01/10/2018 Date Updated -22/10/2018
i07323626
Piston Motor (Hydraulic Fan) - Assemble
SMCS - 1386-016-QP; 5058-016-HFN; 5058-016-FM
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
437-3776 Fixture As 1
1U-9127 Adapter Plate 1
1U-5750 Engine Stand 1
8S-9089 Bolt 2
5P-8245 Hard Washer 4
1F-7958 Full Nut 2
B 1P-0510 Driver Gp 1
C
8T-3980 Nut 1
8T-5096 Tool Gp 1
Reference: Special Instruction, "Visual Service Procedures - Symbols" M0066576
1/14
336 Excavator GDY00001-UP (MACHINE) POWERED BY C9.3 Engine(M0093549 ...
2020/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...

Illustration 1 g06284363
Illustration 2 g06284366
2/14
336 Excavator GDY00001-UP (MACHINE) POWERED BY C9.3 Engine(M0093549 ...
2020/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...

Illustration 3 g06284371
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
3/14
336 Excavator GDY00001-UP (MACHINE) POWERED BY C9.3 Engine(M0093549 ...
2020/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...

Illustration 4 g06284374
Illustration 5 g06284376
4/14
336 Excavator GDY00001-UP (MACHINE) POWERED BY C9.3 Engine(M0093549 ...
2020/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...

Illustration 6 g06284382
Illustration 7 g06284680
5/14
336 Excavator GDY00001-UP (MACHINE) POWERED BY C9.3 Engine(M0093549 ...
2020/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...

Illustration 8 g06284676
Illustration 9 g06284914
6/14
336 Excavator GDY00001-UP (MACHINE) POWERED BY C9.3 Engine(M0093549 ...
2020/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...

Illustration 10 g06284918
Illustration 11 g06284920
Install the bearing cup only at this point.
7/14
336 Excavator GDY00001-UP (MACHINE) POWERED BY C9.3 Engine(M0093549 ...
2020/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...

Illustration 12 g06284921
Illustration 13 g06284924
Use Tooling (C) and a prybar to check the bearing preload. The bearing preload is between 0.00 mm (0.000 inch)to
0.05 mm (0.002 inch). Adjust the shim under the bearing cone, if necessary.
8/14
336 Excavator GDY00001-UP (MACHINE) POWERED BY C9.3 Engine(M0093549 ...
2020/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...

Illustration 14 g06284926
Illustration 15 g06284942
9/14
336 Excavator GDY00001-UP (MACHINE) POWERED BY C9.3 Engine(M0093549 ...
2020/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...

Illustration 16 g06285214
Illustration 17 g06285219
10/14
336 Excavator GDY00001-UP (MACHINE) POWERED BY C9.3 Engine(M00935...
2020/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...

Illustration 18 g06285224
Illustration 19 g06285228
11/14
336 Excavator GDY00001-UP (MACHINE) POWERED BY C9.3 Engine(M00935...
2020/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...

Illustration 20 g06285232
Illustration 21 g06285234
Improper assembly of parts that are spring loaded can cause bodily
injury.
12/14
336 Excavator GDY00001-UP (MACHINE) POWERED BY C9.3 Engine(M00935...
2020/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...

To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
Illustration 22 g06285239
Illustration 23 g06285240
13/14
336 Excavator GDY00001-UP (MACHINE) POWERED BY C9.3 Engine(M00935...
2020/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...

Illustration 24 g06285246
End By:
a. Install the piston motor (Hydraulic Fan).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Sep 7 00:03:18 UTC+0800 2020
14/14
336 Excavator GDY00001-UP (MACHINE) POWERED BY C9.3 Engine(M00935...
2020/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...

Illustration 1 g06242582
Illustration 2 g06242678
Illustration 3 g06242699
2/6
336 Excavator GDY00001-UP (MACHINE) POWERED BY C9.3 Engine(M0093549 ...
2020/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...

Illustration 4 g06242709
Illustration 5 g06242740
3/6
336 Excavator GDY00001-UP (MACHINE) POWERED BY C9.3 Engine(M0093549 ...
2020/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...

Illustration 6 g06242755
Illustration 7 g06242780
Installation Procedure
1. Install the hydraulic lockout control in the reverse order of removal.
4/6
336 Excavator GDY00001-UP (MACHINE) POWERED BY C9.3 Engine(M0093549 ...
2020/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...

Illustration 8 g06242790
Illustration 9 g06242793
5/6
336 Excavator GDY00001-UP (MACHINE) POWERED BY C9.3 Engine(M0093549 ...
2020/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...

Illustration 10 g06242796
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Sep 7 00:04:13 UTC+0800 2020
6/6
336 Excavator GDY00001-UP (MACHINE) POWERED BY C9.3 Engine(M0093549 ...
2020/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...

Illustration 2 g06307978
Illustration 3 g06307982
Installation Procedure
1. Install in the reverse order of removal.
2/3
336 Excavator GDY00001-UP (MACHINE) POWERED BY C9.3 Engine(M0093549 ...
2020/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...

Illustration 4 g06307997
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Sep 7 00:05:09 UTC+0800 2020
3/3
336 Excavator GDY00001-UP (MACHINE) POWERED BY C9.3 Engine(M0093549 ...
2020/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...

Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading

The document provides instructions for removing and installing components on a 336 excavator, including the piston motor (hydraulic fan), hydraulic lockout control, and operator monitor. It contains detailed procedures with required tools and multiple illustrations showing each step. Safety warnings are included to prevent injury when working with spring-loaded parts. The document is from Caterpillar and intended for technicians servicing 336 excavator models powered by a C9.3 engine.

Caterpillar Cat 336 Excavator (Prefix DKS) Service Repair Manual Instant Down...

f89siekkmdmm2w

Caterpillar Cat 336 Excavator (Prefix DKS) Service Repair Manual (DKS00001 an...

djdksmmdmd

Caterpillar Cat 336 Excavator (Prefix DKS) Service Repair Manual Instant Down...

f8uejkdkdmm3e

Caterpillar cat 336 excavator (prefix dks) service repair manual (dks00001 an...

dikskedmdm

The document provides instructions for removing and installing various engine components on a Caterpillar 336 Excavator including the lifter group, camshaft, camshaft gear, camshaft bearings, and engine oil pan. The instructions include lists of required tools and multiple step-by-step illustrations for each procedure. Safety notices are also provided throughout to ensure proper handling of parts during disassembly and reassembly.

Caterpillar Cat 730 Articulated Truck (Prefix AGF) Service Repair Manual Inst...

8foskkdjdkdm3e

This document provides assembly instructions for a torque converter in a 730 articulated truck. It lists 34 steps to assemble the various components of the torque converter, including housings, bearings, seals, discs, and shafts. Personal protective equipment is required and cleanliness is emphasized throughout the assembly process. Torque specifications are provided for securing different fasteners.

Caterpillar Cat 730 Articulated Truck (Prefix 3T3) Service Repair Manual Inst...

8foskkdjdkdm3e

The document provides instructions for removing and installing various engine components on a Caterpillar C13 engine, including: - Camshaft - removal involves supporting lifters with a magnetic tool, removing bolts and gears, and carefully removing the camshaft with two people. Installation requires ensuring proper timing. - Camshaft gear - removed using a press and installed by heating to 315°C and pressing onto the camshaft. - Camshaft bearings - removed using a puller tool and lubricant, installed using a receiver sleeve tool by pressing in from the rear. - Engine oil pan - removed by draining oil first, then removing bolts, studs, clips

Caterpillar Cat 730 Articulated Truck (Prefix 3F3) Service Repair Manual Inst...

8foskkdjdkdm3e

This document provides instructions for removing and installing various components of the rear gear group and flywheel on a Caterpillar 730 articulated truck with a C13 engine. The removal procedure involves using various tools to remove bolts, seals, gears, covers, and bearings. The installation procedure specifies cleaning and lubricating components, pressing bearings in at the proper angles and depths, and torquing bolts to the specified values.

Caterpillar Cat 725C2 Articulated Truck (Prefix 2L6) Service Repair Manual In...

8foskkdjdkdm3e

This document provides instructions for removing and installing various components of a Caterpillar C9.3 engine, including the valve mechanism cover, compression brake, and compression brake valve assembly. The procedures include illustrations of the components and multi-step instructions for removal and installation, including proper torque specifications. Safety precautions are provided where necessary.

Caterpillar Cat 657G Wheel Tractor (Prefix W1B) Service Repair Manual Instant...

8foskkdjdkdm3e

This document provides instructions for disassembling and assembling the torque converter of a 657G Wheel Tractor. It lists the required tools and gives step-by-step instructions with accompanying illustrations. The torque converter is first disassembled by removing various components like the retaining rings, bolts, plates, and internal mechanisms. It is then reassembled in the reverse order, ensuring cleanliness and applying grease as needed.

Caterpillar Cat 657G WHEEL TRACTOR (Prefix A4G) Service Repair Manual Instant...

8foskkdjdkdm3e

The document provides instructions for removing and installing a flywheel housing on a Caterpillar C15 or C18 engine. It describes removing components like the crankshaft rear seal, electric starting motor, and rear power take-off. It then explains how to use lifting tools to remove the flywheel housing and reinstall it, replacing seals and tightening bolts in a specific sequence and torque range. Similar instructions are provided for removing and installing just the rear power take-off components.

Caterpillar Cat 657G WHEEL SCRAPER (Prefix W1F) Service Repair Manual Instant...

8foskkdjdkdm3e

Caterpillar Cat 329DL EXCAVATOR (Prefix XDB) Service Repair Manual Instant Do...

8foskkdjdkdm3e

This document provides assembly instructions for repairing the transmission of a 329DL excavator. It consists of 52 steps to assemble the transmission components in the correct order, including installing gaskets, bearings, pistons, seals, covers, and other parts into the pump housing. Precautions are provided for steps involving spring tension. Required tools include a transmission repair stand, link brackets, driver group, seal guide, and retaining ring pliers.

Caterpillar Cat 657G Wheel Scraper (Prefix W1E) Service Repair Manual Instant...

8foskkdjdkdm3e

This document provides instructions for removing and disassembling the drive shaft and scavenge pump on a 657G Wheel Scraper. Key steps include: 1. Removing retaining rings, covers, and guards to access the drive shaft. 2. Using eyebolts and lifting devices to remove the heavy drive shaft and tube assembly. 3. Checking alignment of components and removing the yoke assembly, bearings, and seals. 4. Disassembling the scavenge pump by removing O-rings, bearings, shafts, and gears.

Caterpillar Cat 657E WHEEL TRACTOR (Prefix 91Z) Service Repair Manual Instant...

8foskkdjdkdm3e

This service repair manual provides instructions for removing and installing the cylinder head and lifter group on Caterpillar 3412C engines. The summary is: 1. The document outlines the required tools and safety procedures for removing the cylinder head, which involves detaching hoses, bolts, and lifting the heavy part off. 2. Instructions are provided for installing the new cylinder head gasket and reattaching the cylinder head using lifting brackets and torqueing the bolts in a specific sequence. 3. The lifter group removal process involves using a special tool to pull out the lifters and springs from the bores. Reinstallation requires aligning new springs and pressing the lifter assemblies back into place

Similar to Caterpillar Cat 336 Excavator (Prefix GDY) Service Repair Manual Instant Download.pdf

Caterpillar Cat 336 Excavator (Prefix DKS) Service Repair Manual (DKS00001 an...

shun96145luo

Caterpillar Cat 336 Excavator (Prefix DKS) Service Repair Manual (DKS00001 an...

f7useijdkdmd1

Caterpillar Cat 336 Excavator (Prefix DKS) Service Repair Manual Instant Down...

shibi1322

Caterpillar Cat 336 Excavator (Prefix DKS) Service Repair Manual Instant Down...

fucheng89

Caterpillar Cat 336 Excavator (Prefix DKS) Service Repair Manual Instant Down...

8foskkdjdkdm3e

Caterpillar Cat 336 Excavator (Prefix DKS) Service Repair Manual (DKS00001 an...

fjdkksmemd

Caterpillar Cat 336 Excavator (Prefix DKS) Service Repair Manual (DKS00001 an...

f7siejdkdmd

Caterpillar Cat 336 Excavator (Prefix DKS) Service Repair Manual Instant Down...

yin9niaojiao

Caterpillar Cat 336 Excavator (Prefix DKS) Service Repair Manual (DKS00001 an...

dxem8295569

Caterpillar cat 336 excavator (prefix dks) service repair manual (dks00001 an...

fjjskekdmme

Caterpillar cat 336 excavator (prefix dks) service repair manual (dks00001 an...

fhjsjekdmme

Caterpillar cat 336 excavator (prefix dks) service repair manual (dks00001 an...

fjjskedmme

Similar to Caterpillar Cat 336 Excavator (Prefix GDY) Service Repair Manual Instant Download.pdf (12)

Caterpillar Cat 336 Excavator (Prefix DKS) Service Repair Manual (DKS00001 an...

Caterpillar Cat 336 Excavator (Prefix DKS) Service Repair Manual Instant Down...

Caterpillar Cat 336 Excavator (Prefix DKS) Service Repair Manual (DKS00001 an...

Caterpillar Cat 336 Excavator (Prefix DKS) Service Repair Manual Instant Down...

Caterpillar Cat 336 Excavator (Prefix DKS) Service Repair Manual (DKS00001 an...

Caterpillar cat 336 excavator (prefix dks) service repair manual (dks00001 an...

More from 8foskkdjdkdm3e

Caterpillar Cat 730 Articulated Truck (Prefix AGF) Service Repair Manual Inst...

8foskkdjdkdm3e

Caterpillar Cat 730 Articulated Truck (Prefix 3T3) Service Repair Manual Inst...

8foskkdjdkdm3e

Caterpillar Cat 730 Articulated Truck (Prefix 3F3) Service Repair Manual Inst...

8foskkdjdkdm3e

Caterpillar Cat 725C2 Articulated Truck (Prefix 2L6) Service Repair Manual In...

8foskkdjdkdm3e

Caterpillar Cat 657G Wheel Tractor (Prefix W1B) Service Repair Manual Instant...

8foskkdjdkdm3e

Caterpillar Cat 657G WHEEL TRACTOR (Prefix A4G) Service Repair Manual Instant...

8foskkdjdkdm3e

Caterpillar Cat 657G WHEEL SCRAPER (Prefix W1F) Service Repair Manual Instant...

8foskkdjdkdm3e

Caterpillar Cat 329DL EXCAVATOR (Prefix XDB) Service Repair Manual Instant Do...

8foskkdjdkdm3e

Caterpillar Cat 657G Wheel Scraper (Prefix W1E) Service Repair Manual Instant...

8foskkdjdkdm3e

Caterpillar Cat 657E WHEEL TRACTOR (Prefix 91Z) Service Repair Manual Instant...

8foskkdjdkdm3e

Caterpillar Cat 657E WHEEL TRACTOR (Prefix 90Z) Service Repair Manual Instant...

8foskkdjdkdm3e

Caterpillar Cat 329DL EXCAVATOR (Prefix WLT) Service Repair Manual Instant Do...

8foskkdjdkdm3e

The document provides instructions for disassembling and assembling a recoil spring assembly. Key steps include: 1. Using a specialized tooling bench to securely hold the recoil spring assembly, which is under several tons of force. 2. Carefully removing a nut to release the spring tension before disassembling the recoil spring components. 3. Reassembling the recoil spring components and using the tooling bench to apply controlled compression for assembly. Proper centering and leveling of the assembly is critical.

Caterpillar Cat 657E Wheel Tractor (Prefix 6TR) Service Repair Manual Instant...

8foskkdjdkdm3e

This document provides instructions for removing and installing the rear gear group and flywheel on a Caterpillar 657E wheel tractor. The removal procedure involves using various tools to disassemble the rear gear components and adapter assemblies. The installation procedure describes reassembling these components and requires pressing or installing bearings and seals using a driver group or press. Special care must be taken to keep parts clean and lubricated. The flywheel removal uses tools to secure the crankshaft gear and hoist the heavy flywheel off the engine.

Caterpillar Cat 657E Wheel Scraper (Prefix 87Z) Service Repair Manual Instant...

8foskkdjdkdm3e

This document provides instructions for installing and removing various engine components on a Caterpillar 657E wheel scraper model powered by a 3408 engine, including: 1) Installing the rear gear group by placing gears and bearings on shafts and installing dowels, seals and bolts. 2) Removing the flywheel using guide bolts, brackets and a hoist to lift the heavy flywheel off the crankshaft. 3) Installing the flywheel by heating the ring gear, placing the flywheel on guide bolts, and bolting it into place. 4) Procedures for removing and installing the crankshaft rear seal using punch tools or pullers

Caterpillar Cat 657E WHEEL SCRAPER (Prefix 6PR) Service Repair Manual Instant...

8foskkdjdkdm3e

The document provides instructions for installing the crankshaft rear seal on a Caterpillar 657E wheel scraper. It describes heating the ring gear to 300°C before installing it on the flywheel. It also details installing guide bolts and lifting brackets to position the flywheel, applying grease to the bolt threads, and torquing the bolts to secure the flywheel. Finally, it notes to check the flywheel runout after installation.

Caterpillar Cat 329DL Excavator (Prefix TPM) Service Repair Manual Instant Do...

8foskkdjdkdm3e

This document provides step-by-step instructions for disassembling the pump control and pump housing of a 329DL excavator. It lists 60 steps to remove components like bolts, seals, pins, plates, barrels and shafts. Cleaning is important before disassembly to prevent dirt from entering mechanisms. The right pump control has a proportional reducing valve not present on the left. Tools are required to remove some components like bearings.

Caterpillar Cat 329DL Excavator (Prefix TZL) Service Repair Manual Instant Do...

8foskkdjdkdm3e

This document provides repair instructions for a 329DL excavator transmission. It outlines 38 steps to disassemble and reassemble the transmission, including instructions to clean parts, replace seals and O-rings, measure bearing clearance using shims, and install various transmission components like gears, seals, and housing pieces. Special tools are required for tasks like installing duo-cone seals and bearing surfaces must be coated with anti-seize compound before assembly.

Caterpillar Cat 651E Wheel Tractor (Prefix 4YR) Service Repair Manual Instant...

8foskkdjdkdm3e

This document provides instructions for disassembling and assembling the transmission transfer gears of a Caterpillar 651E wheel tractor. The steps include removing the transmission transfer gears as a unit, disassembling the individual gears and bearings, inspecting and replacing parts, and reassembling the gears and bearings in the correct order with the specified torques and clearances. Precautions are provided such as cleaning and lubricating parts during assembly.

Caterpillar Cat 651E WHEEL SCRAPER (Prefix 88Z) Service Repair Manual Instant...

8foskkdjdkdm3e

This document provides instructions for removing and installing a camshaft on a Caterpillar 651E wheel scraper model. It describes the required tools and multi-step processes for both removing the camshaft from the front or rear of the engine and installing a new camshaft. Precautions are outlined to prevent damage and contain fluids. The document is intended as a service repair manual for technicians performing camshaft maintenance on this model.

Caterpillar Cat 651 and 651B WHEEL SCRAPER (Prefix 45M) Service Repair Manual...

8foskkdjdkdm3e

This document provides instructions for disassembling and assembling various components of a 651B wheel scraper model, including: 1. The engine transfer gear and retarder, with steps to remove gears, bearings, and housing pieces. 2. The transmission transfer gear, with steps to remove gears, bearings, pumps, and the governor. 3. The transmission governor, with identification of parts and steps to disassemble and reassemble the governor valve bodies.

More from 8foskkdjdkdm3e (20)