The document provides disassembly instructions for a travel motor on an excavator model 336D2 L. It outlines 27 steps to fully disassemble the travel motor, removing components like the motor head assembly, springs, seals, plates, valves and more. Precautions are included to release spring forces safely and contain fluids. Detailed illustrations supplement each step in the process.
Caterpillar cat 336 d2 l excavator (prefix ef3) service repair manual (ef3000...pfiskdmjekm
The document provides disassembly instructions for a travel motor on an excavator model 336D2. It describes 27 steps to fully disassemble the travel motor, removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and plates. Tools required include a driver, bearing puller, retaining ring pliers, and lifting eye assembly. Safety precautions are provided to properly release spring forces when disassembling components.
Caterpillar cat 336 f l excavator (prefix tza) service repair manual (tza0000...fjsjekdmmeme
This document provides disassembly instructions for a 336F L excavator travel motor. It describes 27 steps to fully disassemble the travel motor. These include removing the motor head assembly, springs, seals, plates, pistons, bearings, and other internal components. Detailed illustrations are provided to identify each part and guide the disassembly process. Safety precautions are noted regarding releasing spring forces and containing fluids during disassembly.
Caterpillar cat 336 f l excavator (prefix tje) service repair manual (tje0000...fjkskedmme
The document provides instructions for disassembling the travel motor of a 336F excavator. It lists 27 steps to completely disassemble the travel motor, removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and other internal parts. Detailed illustrations accompany each step to show how to properly remove each component. Safety precautions are provided to warn of potential spring forces and ensure protective equipment is worn during disassembly.
Caterpillar cat 336 f l excavator (prefix nbs) service repair manual (nbs0000...fjsjekdmmeme
This document provides disassembly instructions for a 336F excavator travel motor. It lists 27 steps to fully disassemble the travel motor, including removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and more. Various tools are required to remove parts and release spring forces safely. Detailed illustrations accompany each step to show how to disassemble the individual components of the travel motor.
Caterpillar cat 336 f excavator (prefix lcl) service repair manual (lcl00001 ...fjsqazkekdmme
This document provides instructions to disassemble a 336F and 336F L excavator travel motor. It lists the required tools and describes 27 steps to fully disassemble the travel motor. These include removing the motor head assembly, piston assemblies, barrel assembly, springs, seals, and other internal components. Marks should be made on components to ensure proper reassembly. Care is needed when removing parts to avoid damage and release of stored spring forces.
Caterpillar cat 336 f excavator (prefix wcf) service repair manual (wcf00001 ...fjkskedmme
The document provides disassembly instructions for a 336F excavator travel motor over 27 steps. It details removing components like the motor head assembly, piston assemblies, barrel assembly, swashplate, and more. Tools required include a transmission repair stand, lifting eye assembly, driver group, and various bolts, pins and seals. Safety precautions are provided to release spring forces and contain fluids during disassembly.
The document provides disassembly instructions for a 336D2 and 336D2 L excavator travel motor. It outlines 27 steps to fully disassemble the travel motor, including removing the motor head assembly, springs, seals, plates, pistons, bearings, and other internal components. Protective equipment is recommended as springs under tension can cause injury. Detailed illustrations accompany each step to ensure correct reassembly.
Caterpillar cat 336 d2 l excavator (prefix ef3) service repair manual (ef3000...fjjskekdmmem
The document provides disassembly instructions for a travel motor on an excavator model 336D2. It describes 27 steps to fully disassemble the travel motor, removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and plates. Tools required include a driver, bearing puller, retaining ring pliers, and lifting eye assembly. Safety precautions are provided to properly release spring forces when disassembling components.
Caterpillar cat 336 d2 l excavator (prefix ef3) service repair manual (ef3000...pfiskdmjekm
The document provides disassembly instructions for a travel motor on an excavator model 336D2. It describes 27 steps to fully disassemble the travel motor, removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and plates. Tools required include a driver, bearing puller, retaining ring pliers, and lifting eye assembly. Safety precautions are provided to properly release spring forces when disassembling components.
Caterpillar cat 336 f l excavator (prefix tza) service repair manual (tza0000...fjsjekdmmeme
This document provides disassembly instructions for a 336F L excavator travel motor. It describes 27 steps to fully disassemble the travel motor. These include removing the motor head assembly, springs, seals, plates, pistons, bearings, and other internal components. Detailed illustrations are provided to identify each part and guide the disassembly process. Safety precautions are noted regarding releasing spring forces and containing fluids during disassembly.
Caterpillar cat 336 f l excavator (prefix tje) service repair manual (tje0000...fjkskedmme
The document provides instructions for disassembling the travel motor of a 336F excavator. It lists 27 steps to completely disassemble the travel motor, removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and other internal parts. Detailed illustrations accompany each step to show how to properly remove each component. Safety precautions are provided to warn of potential spring forces and ensure protective equipment is worn during disassembly.
Caterpillar cat 336 f l excavator (prefix nbs) service repair manual (nbs0000...fjsjekdmmeme
This document provides disassembly instructions for a 336F excavator travel motor. It lists 27 steps to fully disassemble the travel motor, including removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and more. Various tools are required to remove parts and release spring forces safely. Detailed illustrations accompany each step to show how to disassemble the individual components of the travel motor.
Caterpillar cat 336 f excavator (prefix lcl) service repair manual (lcl00001 ...fjsqazkekdmme
This document provides instructions to disassemble a 336F and 336F L excavator travel motor. It lists the required tools and describes 27 steps to fully disassemble the travel motor. These include removing the motor head assembly, piston assemblies, barrel assembly, springs, seals, and other internal components. Marks should be made on components to ensure proper reassembly. Care is needed when removing parts to avoid damage and release of stored spring forces.
Caterpillar cat 336 f excavator (prefix wcf) service repair manual (wcf00001 ...fjkskedmme
The document provides disassembly instructions for a 336F excavator travel motor over 27 steps. It details removing components like the motor head assembly, piston assemblies, barrel assembly, swashplate, and more. Tools required include a transmission repair stand, lifting eye assembly, driver group, and various bolts, pins and seals. Safety precautions are provided to release spring forces and contain fluids during disassembly.
The document provides disassembly instructions for a 336D2 and 336D2 L excavator travel motor. It outlines 27 steps to fully disassemble the travel motor, including removing the motor head assembly, springs, seals, plates, pistons, bearings, and other internal components. Protective equipment is recommended as springs under tension can cause injury. Detailed illustrations accompany each step to ensure correct reassembly.
Caterpillar cat 336 d2 l excavator (prefix ef3) service repair manual (ef3000...fjjskekdmmem
The document provides disassembly instructions for a travel motor on an excavator model 336D2. It describes 27 steps to fully disassemble the travel motor, removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and plates. Tools required include a driver, bearing puller, retaining ring pliers, and lifting eye assembly. Safety precautions are provided to properly release spring forces when disassembling components.
The document provides instructions for disassembling the travel motor of an excavator model 336D2. It describes 27 steps to fully disassemble the travel motor. This includes removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, plates, and more. Special tools are required and safety precautions mentioned to properly release pressures and remove parts. The disassembly process fully separates all components of the travel motor.
Caterpillar Cat 336D2 L Excavator (Prefix EF3) Service Repair Manual (EF30000...zatao0179249295
The document provides instructions for disassembling a 336D2 and 336D2 L excavator travel motor. It describes 27 steps to remove parts like the motor head assembly, springs, seals, plates, pistons, bearings and other components. Various tools are required including bolts, pins, retaining rings and specialty tools like bearing pullers and drivers. Safety precautions are provided to release spring forces and contain fluids during disassembly.
Caterpillar Cat 336D2 L Excavator (Prefix EF3) Service Repair Manual (EF30000...kesi7153062
The document provides instructions for disassembling a 336D2 and 336D2 L excavator travel motor. It describes 27 steps to remove parts like the motor head assembly, springs, seals, plates, pistons, bearings and other components. Various tools are required including bolts, pins, retaining rings and specialty tools like bearing pullers and drivers. Safety precautions are provided to release spring forces and contain fluids during disassembly.
The document provides instructions for disassembling a 336D2 and 336D2 L excavator travel motor. It describes 27 steps to remove parts like the motor head assembly, springs, seals, plates, pistons, bearings and other components. Various tools are required including bolts, pins, retaining rings and specialty tools like bearing pullers and drivers. Safety precautions are provided to release spring forces and contain fluids during disassembly.
Caterpillar Cat 336D2 L Excavator (Prefix EF3) Service Repair Manual (EF30000...cnp692569
The document provides instructions for disassembling a 336D2 and 336D2 L excavator travel motor. It describes 27 steps to remove parts like the motor head assembly, springs, seals, plates, pistons, bearings and other components. Various tools are required including bolts, pins, retaining rings and specialty tools like bearing pullers and drivers. Safety precautions are provided to release spring forces and contain fluids during disassembly.
The document provides instructions for disassembling the travel motor of an excavator model 336D2. It describes 27 steps to fully disassemble the travel motor. This includes removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, plates, and more. Special tools are required and safety precautions mentioned to properly release pressures and remove parts. The disassembly process ensures each part is removed in the correct order and orientation for accurate reassembly.
Caterpillar Cat 336D2 L Excavator (Prefix MBP) Service Repair Manual Instant ...fijsekkdmdm2w
This document provides disassembly instructions for a travel motor on an excavator model 336D2 L. It involves removing over 30 individual parts in 27 steps, including removing the motor head assembly, port plate, springs, seals, plugs, relief valves, spools, and more. Precautions are given to release spring forces safely and contain fluids. Detailed illustrations are provided to identify each part and guide the disassembly process.
1) The document provides instructions for removing and installing various fuel system components on a C18 Industrial Engine, including the fuel priming pump, fuel filter base, fuel transfer pump, and electronic unit injectors.
2) The procedures describe disconnecting hoses and electrical connections, removing mounting bolts and identifying parts to ensure proper reinstallation.
3) Safety notices emphasize the importance of cleanliness and containing fluids to prevent contamination and environmental damage.
The document provides instructions for removing and installing a pump drive on a C18 Industrial Engine. It includes:
1) A list of required tools and safety notices for working on the engine.
2) Step-by-step instructions to disassemble the pump drive by removing components like bolts, gears, and bearings.
3) Parallel steps for reassembling the pump drive, including installing new seals and adjusting end play.
4) Instructions for installing the fully reassembled pump drive back onto the engine.
This service repair manual provides instructions for removing and installing inlet and exhaust valves, valve guides, valve seat inserts, and the engine oil filter base on a Caterpillar C11 industrial engine. The procedures describe using various tools to remove and install components in a specific sequence, and include safety notices and illustrations. Removal involves disconnecting hoses, removing retaining components, and extracting parts from the cylinder head or engine. Installation is the reverse of removal.
This document provides instructions for removing and installing various engine components on a Caterpillar C11 Industrial Engine. It describes procedures for removing and installing inlet and exhaust valves, valve guides, valve seat inserts, the engine oil filter base, and the engine oil cooler. The document includes illustrations to identify the specific components and tools required for each procedure.
The document provides instructions for removing and installing various engine components on a Caterpillar C9.3B industrial engine. It includes steps for removing and installing the crankshaft rear seal, flywheel housing, vibration damper and pulley, crankshaft front seal, front cover, and housing (front). Diagrams and part numbers for required tools are provided for each procedure. The document is part of a service manual for Caterpillar technicians repairing C9.3B engines.
This document provides instructions for removing and installing a unit injector, unit injector sleeve, and turbocharger from a C9.3 Industrial Engine. The unit injector removal procedure involves disconnecting electrical and fuel lines, loosening mounting bolts, and extracting the injector. Installation requires cleaning, lubricating seals, and tightening bolts. The sleeve procedure includes draining coolant, cutting threads to remove the old sleeve, cleaning the bore, applying retaining compound to the new sleeve, and installing with a hammer and driver. The turbocharger removal involves disconnecting coolant and air lines and removing mounting nuts. Installation requires applying anti-seize to bolts and tightening clamps and nuts.
Caterpillar cat 966 c wheel loader (prefix 78g) service repair manual (78g028...fjjskmdmem
The document provides instructions for removing and installing wheel spindle assemblies on a Caterpillar 966C wheel loader. Key steps include removing the brake shoes, brake camshaft, and air lines before removing the spindle assembly using a hoist. Installation involves installing seals and bearings on the spider and bearing assembly before placing it on the spindle and securing with nuts. Brake components and air lines are then reinstalled.
Caterpillar cat 966 c wheel loader (prefix 78g) service repair manual (78g010...fjjskmdmem
This document provides instructions for removing and installing various components of the 966C wheel loader's power train, including wheels, brake shoes, wheel spindles, the front differential and carrier, and the rear differential and carrier. The procedures involve draining fluids, removing bolts and seals, using hoists and jacks, and reinstalling components in the reverse order while applying lubricants and torques as specified. Safety precautions are noted such as relieving air pressure from brake systems before disconnecting lines.
Caterpillar cat 966 c wheel loader (prefix 76j) service repair manual (76j096...fjjskmdmem
The document provides instructions for removing and installing various components of the rear differential and carrier assembly of a 966C wheel loader, including removing the rear axles, disconnecting air lines, removing mounting bolts and lifting the rear of the machine to access the differential and carrier. The rear differential and carrier unit weighs 350 pounds and houses the internal gears that allow the rear wheels to turn at different speeds.
Caterpillar cat 966 c wheel loader (prefix 76j) service repair manual (76j063...fjjskmdmem
This document provides instructions for removing and installing various components of the power train on a 966C wheel loader, including axles, final drive planet carriers, final drive ring gears and hubs, and wheels/bearings. The procedures describe draining oil, removing retaining rings and gears, and reinstalling components along with adjusting wheel bearings and installing seals.
Caterpillar cat 966 c wheel loader (prefix 76j) service repair manual (76j000...fjjskmdmem
This document provides instructions for removing and installing various components of the final drive and wheel assembly of a 966C wheel loader, including:
- Removing and installing final drive planet carriers
- Disassembling and assembling final drive planet carriers
- Removing and installing final drive ring gears, hubs, and wheels
- Removing and installing wheels, bearings, and seals
- Removing and installing brake shoes
The document contains detailed step-by-step instructions and diagrams for each procedure.
Caterpillar cat 966 c wheel loader (prefix 18b) service repair manual (18b012...fjjskmdmem
The document provides instructions for disassembling and assembling the fuel injection pump housing of a Caterpillar 966C wheel loader. It describes:
1) Removing components like the fuel rack, lifters, camshaft, and bearings during disassembly.
2) Cleaning and lubricating parts before assembly.
3) Installing bearings, camshaft, lifters, fuel rack, and other components in reverse order of removal.
4) Timing the fuel injection pump housing and governor during installation on the engine.
Caterpillar cat 966 c wheel loader (prefix 18b) service repair manual (18b002...fjjskmdmem
1. The documents provide instructions for removing, installing, and servicing components of the engine oil filter base and cylinder head valves for a Caterpillar 966C wheel loader.
2. The procedures include using various tools to remove and install valves, valve guides, valve seat inserts, and the engine oil filter base.
3. Precautions are provided such as keeping parts clean and containing fluids during repair work.
Caterpillar cat 950 e wheel loader (prefix 65r) service repair manual (65r030...fjjskmdmem
The document provides instructions for removing and installing various components of the front and rear axle assemblies of a Caterpillar 950B wheel loader, including wheel spindles, front and rear axle housings, rear axle housing supports, and the front drive shaft and carrier bearing. The instructions include lists of required tools and parts, diagrams illustrating the component locations and removal/installation steps, and torque specifications for reinstalling components. Safety precautions are noted, such as blocking wheels and releasing parking brakes before removing drive shafts.
Caterpillar cat 950 e wheel loader (prefix 63r) service repair manual (63r060...fjjskmdmem
This document provides instructions for disassembling and assembling the transfer gears of a Caterpillar 950B wheel loader. It describes removing and installing over 30 individual parts in 14 steps. Key steps include using bolts and screws to separate the transmission from the transfer gears, removing bearing cages and gears, and checking bearing end play during reassembly. Proper heating and cooling of parts is emphasized during assembly/disassembly. The document also provides brief instructions for connecting and disconnecting the steering frame lock link and removing and installing the loader bucket.
More Related Content
Similar to Caterpillar cat 336 d2 l excavator (prefix ef3) service repair manual (ef300001 and up)
The document provides instructions for disassembling the travel motor of an excavator model 336D2. It describes 27 steps to fully disassemble the travel motor. This includes removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, plates, and more. Special tools are required and safety precautions mentioned to properly release pressures and remove parts. The disassembly process fully separates all components of the travel motor.
Caterpillar Cat 336D2 L Excavator (Prefix EF3) Service Repair Manual (EF30000...zatao0179249295
The document provides instructions for disassembling a 336D2 and 336D2 L excavator travel motor. It describes 27 steps to remove parts like the motor head assembly, springs, seals, plates, pistons, bearings and other components. Various tools are required including bolts, pins, retaining rings and specialty tools like bearing pullers and drivers. Safety precautions are provided to release spring forces and contain fluids during disassembly.
Caterpillar Cat 336D2 L Excavator (Prefix EF3) Service Repair Manual (EF30000...kesi7153062
The document provides instructions for disassembling a 336D2 and 336D2 L excavator travel motor. It describes 27 steps to remove parts like the motor head assembly, springs, seals, plates, pistons, bearings and other components. Various tools are required including bolts, pins, retaining rings and specialty tools like bearing pullers and drivers. Safety precautions are provided to release spring forces and contain fluids during disassembly.
The document provides instructions for disassembling a 336D2 and 336D2 L excavator travel motor. It describes 27 steps to remove parts like the motor head assembly, springs, seals, plates, pistons, bearings and other components. Various tools are required including bolts, pins, retaining rings and specialty tools like bearing pullers and drivers. Safety precautions are provided to release spring forces and contain fluids during disassembly.
Caterpillar Cat 336D2 L Excavator (Prefix EF3) Service Repair Manual (EF30000...cnp692569
The document provides instructions for disassembling a 336D2 and 336D2 L excavator travel motor. It describes 27 steps to remove parts like the motor head assembly, springs, seals, plates, pistons, bearings and other components. Various tools are required including bolts, pins, retaining rings and specialty tools like bearing pullers and drivers. Safety precautions are provided to release spring forces and contain fluids during disassembly.
The document provides instructions for disassembling the travel motor of an excavator model 336D2. It describes 27 steps to fully disassemble the travel motor. This includes removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, plates, and more. Special tools are required and safety precautions mentioned to properly release pressures and remove parts. The disassembly process ensures each part is removed in the correct order and orientation for accurate reassembly.
Caterpillar Cat 336D2 L Excavator (Prefix MBP) Service Repair Manual Instant ...fijsekkdmdm2w
This document provides disassembly instructions for a travel motor on an excavator model 336D2 L. It involves removing over 30 individual parts in 27 steps, including removing the motor head assembly, port plate, springs, seals, plugs, relief valves, spools, and more. Precautions are given to release spring forces safely and contain fluids. Detailed illustrations are provided to identify each part and guide the disassembly process.
Similar to Caterpillar cat 336 d2 l excavator (prefix ef3) service repair manual (ef300001 and up) (7)
1) The document provides instructions for removing and installing various fuel system components on a C18 Industrial Engine, including the fuel priming pump, fuel filter base, fuel transfer pump, and electronic unit injectors.
2) The procedures describe disconnecting hoses and electrical connections, removing mounting bolts and identifying parts to ensure proper reinstallation.
3) Safety notices emphasize the importance of cleanliness and containing fluids to prevent contamination and environmental damage.
The document provides instructions for removing and installing a pump drive on a C18 Industrial Engine. It includes:
1) A list of required tools and safety notices for working on the engine.
2) Step-by-step instructions to disassemble the pump drive by removing components like bolts, gears, and bearings.
3) Parallel steps for reassembling the pump drive, including installing new seals and adjusting end play.
4) Instructions for installing the fully reassembled pump drive back onto the engine.
This service repair manual provides instructions for removing and installing inlet and exhaust valves, valve guides, valve seat inserts, and the engine oil filter base on a Caterpillar C11 industrial engine. The procedures describe using various tools to remove and install components in a specific sequence, and include safety notices and illustrations. Removal involves disconnecting hoses, removing retaining components, and extracting parts from the cylinder head or engine. Installation is the reverse of removal.
This document provides instructions for removing and installing various engine components on a Caterpillar C11 Industrial Engine. It describes procedures for removing and installing inlet and exhaust valves, valve guides, valve seat inserts, the engine oil filter base, and the engine oil cooler. The document includes illustrations to identify the specific components and tools required for each procedure.
The document provides instructions for removing and installing various engine components on a Caterpillar C9.3B industrial engine. It includes steps for removing and installing the crankshaft rear seal, flywheel housing, vibration damper and pulley, crankshaft front seal, front cover, and housing (front). Diagrams and part numbers for required tools are provided for each procedure. The document is part of a service manual for Caterpillar technicians repairing C9.3B engines.
This document provides instructions for removing and installing a unit injector, unit injector sleeve, and turbocharger from a C9.3 Industrial Engine. The unit injector removal procedure involves disconnecting electrical and fuel lines, loosening mounting bolts, and extracting the injector. Installation requires cleaning, lubricating seals, and tightening bolts. The sleeve procedure includes draining coolant, cutting threads to remove the old sleeve, cleaning the bore, applying retaining compound to the new sleeve, and installing with a hammer and driver. The turbocharger removal involves disconnecting coolant and air lines and removing mounting nuts. Installation requires applying anti-seize to bolts and tightening clamps and nuts.
Caterpillar cat 966 c wheel loader (prefix 78g) service repair manual (78g028...fjjskmdmem
The document provides instructions for removing and installing wheel spindle assemblies on a Caterpillar 966C wheel loader. Key steps include removing the brake shoes, brake camshaft, and air lines before removing the spindle assembly using a hoist. Installation involves installing seals and bearings on the spider and bearing assembly before placing it on the spindle and securing with nuts. Brake components and air lines are then reinstalled.
Caterpillar cat 966 c wheel loader (prefix 78g) service repair manual (78g010...fjjskmdmem
This document provides instructions for removing and installing various components of the 966C wheel loader's power train, including wheels, brake shoes, wheel spindles, the front differential and carrier, and the rear differential and carrier. The procedures involve draining fluids, removing bolts and seals, using hoists and jacks, and reinstalling components in the reverse order while applying lubricants and torques as specified. Safety precautions are noted such as relieving air pressure from brake systems before disconnecting lines.
Caterpillar cat 966 c wheel loader (prefix 76j) service repair manual (76j096...fjjskmdmem
The document provides instructions for removing and installing various components of the rear differential and carrier assembly of a 966C wheel loader, including removing the rear axles, disconnecting air lines, removing mounting bolts and lifting the rear of the machine to access the differential and carrier. The rear differential and carrier unit weighs 350 pounds and houses the internal gears that allow the rear wheels to turn at different speeds.
Caterpillar cat 966 c wheel loader (prefix 76j) service repair manual (76j063...fjjskmdmem
This document provides instructions for removing and installing various components of the power train on a 966C wheel loader, including axles, final drive planet carriers, final drive ring gears and hubs, and wheels/bearings. The procedures describe draining oil, removing retaining rings and gears, and reinstalling components along with adjusting wheel bearings and installing seals.
Caterpillar cat 966 c wheel loader (prefix 76j) service repair manual (76j000...fjjskmdmem
This document provides instructions for removing and installing various components of the final drive and wheel assembly of a 966C wheel loader, including:
- Removing and installing final drive planet carriers
- Disassembling and assembling final drive planet carriers
- Removing and installing final drive ring gears, hubs, and wheels
- Removing and installing wheels, bearings, and seals
- Removing and installing brake shoes
The document contains detailed step-by-step instructions and diagrams for each procedure.
Caterpillar cat 966 c wheel loader (prefix 18b) service repair manual (18b012...fjjskmdmem
The document provides instructions for disassembling and assembling the fuel injection pump housing of a Caterpillar 966C wheel loader. It describes:
1) Removing components like the fuel rack, lifters, camshaft, and bearings during disassembly.
2) Cleaning and lubricating parts before assembly.
3) Installing bearings, camshaft, lifters, fuel rack, and other components in reverse order of removal.
4) Timing the fuel injection pump housing and governor during installation on the engine.
Caterpillar cat 966 c wheel loader (prefix 18b) service repair manual (18b002...fjjskmdmem
1. The documents provide instructions for removing, installing, and servicing components of the engine oil filter base and cylinder head valves for a Caterpillar 966C wheel loader.
2. The procedures include using various tools to remove and install valves, valve guides, valve seat inserts, and the engine oil filter base.
3. Precautions are provided such as keeping parts clean and containing fluids during repair work.
Caterpillar cat 950 e wheel loader (prefix 65r) service repair manual (65r030...fjjskmdmem
The document provides instructions for removing and installing various components of the front and rear axle assemblies of a Caterpillar 950B wheel loader, including wheel spindles, front and rear axle housings, rear axle housing supports, and the front drive shaft and carrier bearing. The instructions include lists of required tools and parts, diagrams illustrating the component locations and removal/installation steps, and torque specifications for reinstalling components. Safety precautions are noted, such as blocking wheels and releasing parking brakes before removing drive shafts.
Caterpillar cat 950 e wheel loader (prefix 63r) service repair manual (63r060...fjjskmdmem
This document provides instructions for disassembling and assembling the transfer gears of a Caterpillar 950B wheel loader. It describes removing and installing over 30 individual parts in 14 steps. Key steps include using bolts and screws to separate the transmission from the transfer gears, removing bearing cages and gears, and checking bearing end play during reassembly. Proper heating and cooling of parts is emphasized during assembly/disassembly. The document also provides brief instructions for connecting and disconnecting the steering frame lock link and removing and installing the loader bucket.
Caterpillar cat 950 e wheel loader (prefix 22z) service repair manual (22z031...fjjskmdmem
This document provides instructions for removing and installing a crankshaft on a Caterpillar 3304B or 3306B engine. It describes using various tools to remove the crankshaft by lifting it straight up after removing connecting rods, caps and bolts. It also details installing new main and connecting rod bearings, checking clearances with plastigage, and reinstalling the crankshaft by lowering it into place and reattaching connecting rods and caps. A second section provides steps for accurately checking bearing clearances using plastic gauge strips.
Caterpillar cat 950 e wheel loader (prefix 22z) service repair manual (22z000...fjjskmdmem
1. The document provides instructions for disassembling and assembling components of the fuel injection system for Caterpillar 3304B and 3306B engines, including the fuel injection pump housing, governor, and related parts.
2. The procedures include removing and installing bearings, camshafts, lifters, racks, gaskets and covers using various tools. Proper positioning and torque specifications are provided.
3. Detailed illustrations accompany each step to show how to disassemble and assemble the parts in the correct order and orientation.
Caterpillar cat 950 b wheel loader (prefix 65r) service repair manual (65r030...fjjskmdmem
The document provides instructions for removing and installing various components of the front and rear axle assemblies of a Caterpillar 950B wheel loader, including wheel spindles, front and rear axle housings, rear axle housing supports, and the front drive shaft and carrier bearing. The instructions include numbered steps detailing how to properly support and secure the components, which fasteners to remove and install, and proper torques to use.
Caterpillar cat 950 b wheel loader (prefix 65r) service repair manual (65r028...fjjskmdmem
The document provides instructions for removing and installing an exhaust manifold on a Caterpillar 950B wheel loader. Key steps include removing the turbocharger, fuel injection lines, exhaust manifold nuts and bolts, and exhaust manifold gaskets. When installing, apply anti-seize compound to studs if removed previously and ensure the two longer studs are in the correct position. Proper cleaning and installation of all parts is emphasized to prevent contamination.
Caterpillar cat 950 b wheel loader (prefix 65r) service repair manual (65r000...fjjskmdmem
This document provides instructions for removing and installing various components of a Caterpillar 3304 engine, including the spacer plate, water directors, lifter group, camshaft, and camshaft bearings. The procedures provide detailed steps and illustrations for each component, with notices to keep parts clean and properly align timing marks.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D2 EXCAVATOR EF3
Configuration: 336D2 L OEM EF300001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
336D 2L and 340D 2L Excavators Machine Systems
Media Number -M0065626-02 Publication Date -01/09/2015 Date Updated -14/12/2017
i06605028
Travel Motor - Disassemble
SMCS - 4351-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- M12 x 1.75 x 250 mm (10 inch) Threaded Rod 1
B
8T-0651 Bolt 1
8T-4167 Hard Washer 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
Start By:
a. Remove the travel motor.
1. Fasten the travel motor in Tooling (A) in a vertical position. The weight of the travel motor
is approximately 88 kg (195 lb).
1/10
336D2 L OEM EF300001-UP (MACHINE) POWERED BY C9 Engine(M0077926 - ...
2020/8/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. 2. Put an alignment mark across the head and the body of the travel motor for assembly
purposes. The head must be reinstalled in the heads original position on the body of the
travel motor.
Illustration 1 g00887295
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
Note: During the removal of head (2) from the travel motor, be careful not to damage the
mating surfaces of the components.
3. Remove bolts (1).
4. Remove head (2) from the body of the travel motor.
2/10
336D2 L OEM EF300001-UP (MACHINE) POWERED BY C9 Engine(M0077926 - ...
2020/8/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 2 g00887302
5. Remove O-ring seal (3), port plate (4), and bearing (5).
Illustration 3 g00887311
6. Remove O-ring seals (6). Remove springs (7).
Illustration 4 g00887331
Illustration 5 g00890074
Example of the use of Tooling (B).
3/10
336D2 L OEM EF300001-UP (MACHINE) POWERED BY C9 Engine(M0077926 - ...
2020/8/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. 7. Place a shop towel over brake piston (8). Retain brake piston (8) with Tooling (B). Apply
approximately 525 kPa (75 psi) of shop air pressure to brake release Port (Y). Make sure
that the shop air pressure is free of water. Brake piston (8) will move up the piston guide,
and out of the piston guide. Remove brake piston (8) from the body of the travel motor.
Illustration 6 g00887336
8. Remove seal (9) and backup ring (10) from the brake piston.
9. Remove seal (11) and backup ring (12) from the brake piston.
Illustration 7 g00887355
10. Remove plates (13) and friction discs (14).
4/10
336D2 L OEM EF300001-UP (MACHINE) POWERED BY C9 Engine(M0077926 - ...
2020/8/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 8 g02107957
Illustration 9 g00887405
Illustration 10 g00887424
11. Install Tooling (C) into shaft (15). Use a prybar to remove the rotating assembly (16) from
the housing.
12. Remove Tooling (C) from shaft (15).
13. Remove shaft (15) from rotating assembly (16).
Illustration 11 g00887426
5/10
336D2 L OEM EF300001-UP (MACHINE) POWERED BY C9 Engine(M0077926 - ...
2020/8/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. 14. Use Tooling (D) to remove retaining ring (17) from shaft (15).
Illustration 12 g00887445
15. Use a suitable press to remove bearing race (18) from shaft (15).
Illustration 13 g03870797
16. Rotate shaft (15). Use a suitable press and Tooling (E) to remove bearing race (19) from
shaft (15).
Illustration 14 g03870686
17. Remove cam plate (20) from barrel assembly (16).
6/10
336D2 L OEM EF300001-UP (MACHINE) POWERED BY C9 Engine(M0077926 - ...
2020/8/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 15 g03870754
18. Remove piston assemblies and retainer plate (21) from barrel assembly (16).
Note: Place marks on the pistons and the barrel assembly. The pistons must be returned to
the original position.
Illustration 16 g03870760
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
19. Remove ball (22) and springs (23).
7/10
336D2 L OEM EF300001-UP (MACHINE) POWERED BY C9 Engine(M0077926 - ...
2020/8/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 17 g03870766
20. Remove bearing (24).
21. Remove keys (25) and locating pins (not shown) from the body of the travel motor.
Illustration 18 g03870770
22. Rotate the housing. Use Tooling (F) to remove retaining ring (26).
23. Remove lip seal (27).
Illustration 19 g03870778
24. Remove bolts (28) and cover (29).
8/10
336D2 L OEM EF300001-UP (MACHINE) POWERED BY C9 Engine(M0077926 - ...
2020/8/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 20 g03870779
25. Remove seal (30) and backup ring (31).
Illustration 21 g03870780
26. Remove piston actuator (32) and seal (33).
Illustration 22 g03870784
27. Remove O-ring seal (34) from the housing of the travel motor.
9/10
336D2 L OEM EF300001-UP (MACHINE) POWERED BY C9 Engine(M0077926 - ...
2020/8/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D2 EXCAVATOR EF3
Configuration: 336D2 L OEM EF300001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
336D 2L and 340D 2L Excavators Machine Systems
Media Number -M0065626-02 Publication Date -01/09/2015 Date Updated -14/12/2017
i07195340
Travel Motor - Disassemble
SMCS - 4351-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 421-5662 Lifting Eye Assembly 1
C
6V-5215 M8 X 1.25 X 16 MM Bolt 2
9M-1974 M8 Hard Washer 2
D 1P-0510 Driver Gp 1
Start By:
a. Remove travel motor.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
1/14
336D2 L OEM EF300001-UP (MACHINE) POWERED BY C9 Engine(M0077926 - ...
2020/8/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
Illustration 1 g06249277
1. Fasten travel motor (1) in a vertical position on Tooling (A). The weight of travel motor (1)
is approximately 82 kg (180 lb).
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
2. Remove bolts (2) and cap (3).
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
2/14
336D2 L OEM EF300001-UP (MACHINE) POWERED BY C9 Engine(M0077926 - ...
2020/8/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Follow the recommended procedure and use all recommended tooling to
release the spring force.
Illustration 2 g06249309
Illustration 3 g06249323
Illustration 4 g06249325
3. Remove bolts (4) and cap (5).
4. Remove spring (6), spring (9), spool assembly (8), and spring seats (7).
3/14
336D2 L OEM EF300001-UP (MACHINE) POWERED BY C9 Engine(M0077926 - ...
2020/8/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 5 g06249329
5. Remove plug (11), relief valve (10), and the O-ring seals.
Illustration 6 g06249334
6. Remove plug (13), relief valve (12), and the O-ring seals.
Illustration 7 g06249337
7. Remove plug (14), and the O-ring seal.
4/14
336D2 L OEM EF300001-UP (MACHINE) POWERED BY C9 Engine(M0077926 - ...
2020/8/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 8 g06249341
Illustration 9 g06249344
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
8. Remove plug (15), spool assembly (16), spring (17), and the O-ring seals.
5/14
336D2 L OEM EF300001-UP (MACHINE) POWERED BY C9 Engine(M0077926 - ...
2020/8/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 10 g06249348
9. Remove plugs (18) and the O-ring seals.
Illustration 11 g06249351
10. Remove bolts (19).
Illustration 12 g06249354
11. Attach Tooling (B) and a suitable lifting device to motor head assembly (20). The weight of
motor head assembly (20) is approximately 27 kg (60 lb). Remove motor head assembly
(20).
6/14
336D2 L OEM EF300001-UP (MACHINE) POWERED BY C9 Engine(M0077926 - ...
2020/8/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 13 g06250338
12. Remove the ball bearing that is located on the bottom side of motor head assembly (20).
Illustration 14 g06249364
Port plate (25) may still be adhered to the bottom of motor head assembly (20).
13. Remove O-ring seals (21), O-ring seal (22), springs (23), springs (24), and port plate (25).
Note: Note the location of springs (23). They must be installed in the same location during
the assembly procedure.
Illustration 15 g06249511
7/14
336D2 L OEM EF300001-UP (MACHINE) POWERED BY C9 Engine(M0077926 - ...
2020/8/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. 14. Insert Tooling (C) into piston assembly (26). Use a suitable prying device and Tooling (C)
to remove piston assembly (26).
Illustration 16 g06250418
15. Remove O-ring seal (27) and O-ring seal (28).
Illustration 17 g06249522
16. Use suitable prying devices to remove guide assembly (29).
Illustration 18 g06249535
17. Remove O-ring seal (30).
8/14
336D2 L OEM EF300001-UP (MACHINE) POWERED BY C9 Engine(M0077926 - ...
2020/8/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 19 g06249539
Illustration 20 g06249544
18. Remove separator plates (31) and friction plates (32). Note the alternating order of separator
plates (31) and friction plates (32) for assembly purposes.
Illustration 21 g06249564
19. Remove barrel assembly (33).
Note: Do not allow the components of barrel assembly (33) to come apart while you
remove barrel assembly (33). The components of barrel assembly (33) must be reinstalled
into the original positions.
9/14
336D2 L OEM EF300001-UP (MACHINE) POWERED BY C9 Engine(M0077926 - ...
2020/8/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 22 g06249598
Note: Mark the component locations for assembly purposes before you disassemble the
barrel assembly.
20. Remove piston assemblies (34) and retainer (35).
Illustration 23 g06249609
21. Remove hold down ball (36).
Illustration 24 g06249621
10/14
336D2 L OEM EF300001-UP (MACHINE) POWERED BY C9 Engine(M0077926 ...
2020/8/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. 22. Remove dowel pins (37).
Illustration 25 g06249657
23. Put location marks on swashplate (38) for assembly purposes. Remove swashplate (38).
Illustration 26 g06249682
24. Remove pistons (39) and the balls.
Illustration 27 g06249751
25. Remove springs (40).
11/14
336D2 L OEM EF300001-UP (MACHINE) POWERED BY C9 Engine(M0077926 ...
2020/8/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
Illustration 28 g06249755
Illustration 29 g06249758
26. Use a suitable press and Tooling (D) to remove snap ring (41), spacers (42), and spring (43).
12/14
336D2 L OEM EF300001-UP (MACHINE) POWERED BY C9 Engine(M0077926 ...
2020/8/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 30 g06249760
27. Use a soft faced hammer to remove shaft assembly (44). Remove shaft assembly (44) in the
direction that is indicated by the arrow.
28. Remove O-ring seal (45).
Illustration 31 g06249762
29. Remove lip seal (46).
Illustration 32 g06249763
30. Use a suitable press to push shaft (47) out of bearing (48).
13/14
336D2 L OEM EF300001-UP (MACHINE) POWERED BY C9 Engine(M0077926 ...
2020/8/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D2 EXCAVATOR EF3
Configuration: 336D2 L OEM EF300001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
336D 2L and 340D 2L Excavators Machine Systems
Media Number -M0065626-02 Publication Date -01/09/2015 Date Updated -14/12/2017
i06242093
Travel Motor - Assemble
SMCS - 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- M12 x 1.75 X 250 mm (10 inch) Threaded Rod 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
G - Loctite 243 -
1/10
336D2 L OEM EF300001-UP (MACHINE) POWERED BY C9 Engine(M0077926 - ...
2020/8/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Illustration 1 g03870784
1. Install O-ring seal (34) onto the housing of the travel motor.
Illustration 2 g03870780
2. Install seal (33) and piston actuator (32). Lubricate the surfaces of piston actuator (32) with
lubricant that is being sealed.
Illustration 3 g03870779
3. Install backup ring (31) and seal (30).
2/10
336D2 L OEM EF300001-UP (MACHINE) POWERED BY C9 Engine(M0077926 - ...
2020/8/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
27. Illustration 4 g03870778
4. Install cover (29) and bolts (28). Tighten bolts (28) to a torque of 28 ± 7 N·m
(248 ± 62 lb in).
Illustration 5 g03870770
5. Apply Tooling (G) to the mating surface of lip seal (27). Use Tooling (E) in order to install
lip seal (27). Lubricate the sealing lip of lip seal (27) with lubricant that is being sealed.
6. Use Tooling (F) in order to install retaining ring (26).
Illustration 6 g03870766
3/10
336D2 L OEM EF300001-UP (MACHINE) POWERED BY C9 Engine(M0077926 - ...
2020/8/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
28. 7. Rotate the housing.
8. Install keys (25) and locating pins (not shown) into the body of the travel motor.
9. Install bearing (24).
Illustration 7 g03870760
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
10. Install springs (23) into the barrel assembly. Install ball (22) onto springs (23). Lubricate
ball (22) with lubricant that is being sealed.
Illustration 8 g03870754
11. Lubricate the piston assemblies with lubricant that is being sealed. Install piston assemblies
and retainer plate (21) into barrel assembly (16).
4/10
336D2 L OEM EF300001-UP (MACHINE) POWERED BY C9 Engine(M0077926 - ...
2020/8/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
29. Note: Take note of the mark on the piston assembly and the barrel assembly. The pistons
must be returned to the same position.
Illustration 9 g03870686
12. Lubricate cam plate (20) with lubricant that is being sealed. Install cam plate (20) onto
barrel assembly (16).
Illustration 10 g00888697
13. Install shaft (15) into a suitable press. Install bearing race (19) onto shaft (15).
Illustration 11 g00887426
5/10
336D2 L OEM EF300001-UP (MACHINE) POWERED BY C9 Engine(M0077926 - ...
2020/8/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...