1) The document provides step-by-step instructions for disassembling the final drive of a 329DL excavator. It involves removing over 30 individual parts including gears, shafts, seals, and housings.
2) Special tools are required to remove some components, and safety precautions are noted regarding the weights of parts that need to be lifted, up to 550 kg for the entire final drive assembly.
3) Detailed illustrations accompany each step to show the specific components and orientation during disassembly. Cleanliness is emphasized to prevent dirt from entering internal mechanisms.
The document provides step-by-step instructions for disassembling the final drive of a 329DL excavator. It begins by removing the final drive assembly and placing it on a repair stand. Key steps include removing the cover, gears, shafts, carriers, and planetary gears. Tools needed are listed. Detailed illustrations accompany each step to show how to remove each component. Cleanliness is emphasized to prevent dirt from entering during disassembly.
Caterpillar cat 330 d2 l excavator (prefix szk) service repair manual (szk000...fjskkksmemm
This document provides instructions for disassembling and assembling the final drive of an excavator model 330D2 L. The disassembly process involves removing over 30 individual components in a specific sequence. This includes removing gears, shafts, bearings, seals, and housing components. The assembly process reverses the disassembly steps and provides details on cleaning, lubricating, and setting proper bearing preloads using shims. Special tools are required for tasks like installing dual-cone seals.
Caterpillar cat 330 d2 l excavator (prefix zbf) service repair manual (zbf000...fjskkksmemm
This document provides instructions for disassembling and assembling the final drive of an excavator model 330D2 L. It describes 32 steps to disassemble the final drive by removing gears, shafts, carriers, seals and other components. It then describes 37 steps for reassembling the final drive, including pressing bearings into housings, measuring clearance, installing seals and gears, and torquing bolts. Cleanliness is emphasized throughout to prevent contamination.
Caterpillar cat 345 d l excavator (prefix yee) service repair manual (yee0000...hhfjksekmm
This document provides instructions for removing and installing various components of the rear gear group and crankshaft rear seal of a 345D L Excavator with a C13 engine. The removal procedure includes using various tools to remove bolts, seals, gears, bushings, and bearings. The installation procedure provides instructions on cleaning, inspecting, applying threadlock, and installing components while ensuring proper dimensions and alignments are met. Torque specifications and notes are provided throughout.
Caterpillar cat 345 c l excavator (prefix s5m) service repair manual (s5m0000...fjsekdmmeed
This document provides instructions for disassembling and assembling the final drive of a 345C L excavator. The disassembly procedure involves removing over 20 components of the final drive including the cover, ring gear, carrier assemblies, planetary gears, and sprocket housing. The assembly procedure instructs to clean all parts, apply anti-seize compound, install bearing cups and cones, and adjust the bearing preload using shims to achieve the proper load. Precise positioning of identification marks is required to reinstall parts in their original locations.
Caterpillar cat 385 c l excavator (prefix sbe) service repair manual (sbe0000...fjkskedmme
This document provides instructions for disassembling and assembling the final drive of a 385C L Excavator. It lists the required tools and gives step-by-step instructions to remove components such as the housing cover, carrier assemblies, planetary gear assemblies, ring gear, and motor housing. Precautions are given to ensure cleanliness during disassembly and assembly. The parts are to be reinstalled in their original locations and orientation marks should be made for alignment. Proper lifting devices and techniques are specified due to the heavy weights of some components.
Caterpillar cat 345 d excavator (prefix neg) service repair manual (neg00001 ...fjjskekdmme
This document provides disassembly and assembly instructions for the final drive of a 345D excavator. It details 30 steps to disassemble the final drive components including removing the cover, carrier assemblies, ring gear, and other internal parts. It then lists 21 steps for reassembling the final drive, including pressing in bearing cups, installing bearing cones and inner races, and refitting the sprocket housing and other components. Tools required are also listed.
Caterpillar cat d400 e ii articulated truck (prefix 8ps) service repair manua...fjsqazkekdmme
This document provides instructions for disassembling and assembling the torque converter of a Caterpillar D400E II articulated truck. It lists 38 steps for disassembly, removing components like the cover, shaft assembly, carrier, impeller, stator, turbine, and housing pieces. It then lists the assembly procedure and importance of cleanliness when reassembling. It describes checking clearances between components before final assembly.
The document provides step-by-step instructions for disassembling the final drive of a 329DL excavator. It begins by removing the final drive assembly and placing it on a repair stand. Key steps include removing the cover, gears, shafts, carriers, and planetary gears. Tools needed are listed. Detailed illustrations accompany each step to show how to remove each component. Cleanliness is emphasized to prevent dirt from entering during disassembly.
Caterpillar cat 330 d2 l excavator (prefix szk) service repair manual (szk000...fjskkksmemm
This document provides instructions for disassembling and assembling the final drive of an excavator model 330D2 L. The disassembly process involves removing over 30 individual components in a specific sequence. This includes removing gears, shafts, bearings, seals, and housing components. The assembly process reverses the disassembly steps and provides details on cleaning, lubricating, and setting proper bearing preloads using shims. Special tools are required for tasks like installing dual-cone seals.
Caterpillar cat 330 d2 l excavator (prefix zbf) service repair manual (zbf000...fjskkksmemm
This document provides instructions for disassembling and assembling the final drive of an excavator model 330D2 L. It describes 32 steps to disassemble the final drive by removing gears, shafts, carriers, seals and other components. It then describes 37 steps for reassembling the final drive, including pressing bearings into housings, measuring clearance, installing seals and gears, and torquing bolts. Cleanliness is emphasized throughout to prevent contamination.
Caterpillar cat 345 d l excavator (prefix yee) service repair manual (yee0000...hhfjksekmm
This document provides instructions for removing and installing various components of the rear gear group and crankshaft rear seal of a 345D L Excavator with a C13 engine. The removal procedure includes using various tools to remove bolts, seals, gears, bushings, and bearings. The installation procedure provides instructions on cleaning, inspecting, applying threadlock, and installing components while ensuring proper dimensions and alignments are met. Torque specifications and notes are provided throughout.
Caterpillar cat 345 c l excavator (prefix s5m) service repair manual (s5m0000...fjsekdmmeed
This document provides instructions for disassembling and assembling the final drive of a 345C L excavator. The disassembly procedure involves removing over 20 components of the final drive including the cover, ring gear, carrier assemblies, planetary gears, and sprocket housing. The assembly procedure instructs to clean all parts, apply anti-seize compound, install bearing cups and cones, and adjust the bearing preload using shims to achieve the proper load. Precise positioning of identification marks is required to reinstall parts in their original locations.
Caterpillar cat 385 c l excavator (prefix sbe) service repair manual (sbe0000...fjkskedmme
This document provides instructions for disassembling and assembling the final drive of a 385C L Excavator. It lists the required tools and gives step-by-step instructions to remove components such as the housing cover, carrier assemblies, planetary gear assemblies, ring gear, and motor housing. Precautions are given to ensure cleanliness during disassembly and assembly. The parts are to be reinstalled in their original locations and orientation marks should be made for alignment. Proper lifting devices and techniques are specified due to the heavy weights of some components.
Caterpillar cat 345 d excavator (prefix neg) service repair manual (neg00001 ...fjjskekdmme
This document provides disassembly and assembly instructions for the final drive of a 345D excavator. It details 30 steps to disassemble the final drive components including removing the cover, carrier assemblies, ring gear, and other internal parts. It then lists 21 steps for reassembling the final drive, including pressing in bearing cups, installing bearing cones and inner races, and refitting the sprocket housing and other components. Tools required are also listed.
Caterpillar cat d400 e ii articulated truck (prefix 8ps) service repair manua...fjsqazkekdmme
This document provides instructions for disassembling and assembling the torque converter of a Caterpillar D400E II articulated truck. It lists 38 steps for disassembly, removing components like the cover, shaft assembly, carrier, impeller, stator, turbine, and housing pieces. It then lists the assembly procedure and importance of cleanliness when reassembling. It describes checking clearances between components before final assembly.
Caterpillar cat 345 b series ii excavator (prefix ald) service repair manual ...fjsekdmmeed
This document provides instructions for removing and installing a lifter group on a 3176C engine. The removal process involves taking out bolts and separating the lifter assembly into sections to remove individual components like brackets, lifters and injector lifters. The installation is the reverse of removal, requiring cleaning of parts and reinstallation in the proper order and orientation. Precautions are provided to contain fluids and dispose of them according to regulations.
Caterpillar cat 345 c excavator (prefix taj) service repair manual (taj00001 ...fjkskedmme
This document provides instructions for disassembling and assembling the final drive of a 345C excavator. The disassembly procedure involves removing over 15 parts from the final drive including the cover, ring gear, carrier assemblies, planetary gears, and sprocket housing. The assembly procedure instructs how to install new seals, bearing cups and cones, shims, and other parts in the reverse order of disassembly while ensuring proper bearing preload. Tools and torque specifications are provided for correctly reassembling the final drive.
Caterpillar cat 324 d ln excavator (prefix sym) service repair manual (sym000...jfksekmmdme
This document provides disassembly instructions for the final drive of a 324D L and 324D LN excavator. It outlines 32 steps to fully disassemble the final drive assembly, including removing gears, shafts, housings, seals, and other internal components. Cleanliness is emphasized to prevent dirt contamination during disassembly. Various specialty tools are listed that are required to remove retaining rings, pins, and other secured pieces. The document provides illustrations and detailed instructions for each step in the disassembly process.
Caterpillar cat 345 d l excavator (prefix kfh) service repair manual (kfh0000...hhfjksekmm
This document provides instructions for removing and installing various components of the rear gear group on a C13 engine, including:
1. The procedure for removing the rear gear group involves removing 10 components and using 2 required tools.
2. The installation procedure involves 11 steps and uses 1 required tool, and includes instructions for properly installing and positioning bearings.
3. Separate sections provide procedures for removing and installing the flywheel and crankshaft rear seal. Precautions are mentioned regarding handling heated parts and containing fluids.
Caterpillar cat 319 d l excavator (prefix zca) service repair manual (zca0000...fjkskedmme
This document provides assembly instructions for a final drive on an excavator model 319D L. It involves 37 steps including installing bearings, seals, gears, and other components into housings and covers. Precise measurements and torque specifications are required. Cleanliness is important throughout the process. The completed final drive and sprocket assembly weighs approximately 310 kg.
Caterpillar cat 312 c l excavator (prefix cbt) service repair manual (cbt0000...fksjksmmde
The document provides instructions for disassembling and assembling the swing drive of a 312C excavator. It describes removing over 20 individual parts in multiple steps to fully disassemble the swing drive. These parts include gears, shafts, bearings, seals, and housings. The assembly section then lists the parts and tools needed and describes the reverse process of installing the components in the proper order and applying sealants or fasteners as needed.
Caterpillar cat 325 d l excavator (prefix dbh) service repair manual (dbh0000...hfjsekekmmd
The document provides instructions for disassembling a service repair manual for excavator models 325D and 325D L. It lists required tools and a multi-step process to disassemble the final drive. Key steps include removing the final drive cover, carrier assembly, ring gears, and other internal components. Cleanliness is important during disassembly to prevent dirt from entering mechanisms.
Caterpillar cat 345 c excavator (prefix wde) service repair manual (wde00001 ...fjsekdmmeed
This document provides instructions for disassembling and assembling the final drive of a 345C excavator. The disassembly procedure involves removing 28 parts in 28 steps, including removing the final drive cover, ring gear, carrier assemblies, planetary gears, and sprocket housing. The assembly procedure involves installing 29 parts in 29 steps in the reverse order, adjusting bearing preload using shims, and applying anti-seize compound and thread lock to ensure proper assembly. Tools such as retaining ring pliers, eyebolts, and a transmission stand are required.
Caterpillar cat 345 d l excavator (prefix pbt) service repair manual (pbt0000...hhfjksekmm
This document provides disassembly and assembly instructions for the swing drive of a 345D L excavator. It details 32 steps to disassemble the swing drive components including removing the carrier assembly, sun gear, ring gear, and bearings. It also lists the required tools. The assembly section notes the importance of cleanliness and lists 13 tools needed for reassembling the swing drive components.
Caterpillar cat 345 d l excavator (prefix rgd) service repair manual (rgd0000...hhfjksekmm
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists 31 steps to fully disassemble the travel motor by removing components like the head, plates, seals, pins, brake piston, disks, and housing keys. Reassembly requires reversing the disassembly steps and ensuring parts are cleaned and placed back in their original locations and orientations. Special tools are listed to aid in removal and installation of components.
Caterpillar cat 422 f backhoe loader (prefix lrh) service repair manual (lrh0...ufjdfjjkskemme
This service repair manual provides instructions for repairing the transmission on a 422F Backhoe Loader. It details removing various transmission components including gears, shafts, seals, and bearings. Special tools are required to remove many parts and springs must be compressed to remove snap rings safely. Detailed illustrations accompany each step to ensure safe and proper repair of the transmission.
The document provides step-by-step instructions to disassemble a final drive assembly. It involves removing over 30 individual parts in a specific sequence, including covers, gears, shafts, seals, washers, and housings. Various tools are required to remove retaining rings, pins, bolts and separate connected pieces. Precautions are given regarding cleaning parts and using lifting devices due to components weighing up to 550 kg.
The document provides step-by-step instructions to disassemble a final drive assembly. It begins by positioning the final drive on a repair stand and removing bolts and covers. Then various gears, shafts, seals and housings are dismantled. Disassembly includes pressing components out of carrier assemblies and using punches to remove pins from shafts. The process separates the sprocket housing from the motor housing and removes more than 30 individual parts.
The document provides step-by-step instructions for disassembling the final drive of a 329DL excavator. It begins by removing the final drive assembly and placing it on a repair stand. Various components are then removed in order, including the cover, gears, shafts, carriers, pins and seals. Detailed illustrations accompany each step to show how to position lifting devices and tools. The process involves disassembling the planetary gears, carriers and housing sections to access all parts.
The document provides step-by-step instructions for disassembling the final drive of a 329DL excavator. It begins by removing the final drive assembly and placing it on a repair stand. Key steps include removing the cover, gears, shafts, carriers, and planetary gears. Tools needed are listed. Detailed illustrations accompany each step to show how to remove each component. Cleanliness is emphasized to prevent dirt from entering during disassembly.
The document provides step-by-step instructions for disassembling the final drive of a 329DL excavator. It begins by removing the final drive assembly and placing it on a repair stand. Key steps include removing the cover, gears, shafts, carriers, and planetary gears. Tools needed are listed. Detailed illustrations accompany each step to show how to remove each component. Cleanliness is emphasized to prevent dirt from entering during disassembly.
Caterpillar cat 323 e ln excavator (prefix rap) service repair manual (rap000...fikkskmmdm
This document provides instructions for servicing the final drive of excavator models 323E L, 323E LN, and 323E SA. It details the disassembly and assembly procedures, including removing and installing the various components of the final drive such as the carrier assembly, ring gears, planetary gears, seals, and bearings. Precise instructions are provided for tasks like loosening bolts in a specific sequence, applying sealant, measuring clearances, and setting bearing preloads to ensure proper reassembly.
Caterpillar cat 323 e l excavator (prefix rap) service repair manual (rap0000...fikkskkdmmd
This document provides instructions for servicing the final drive of excavator models 323E L, 323E LN, and 323E SA. It includes procedures for disassembling and removing components like the final drive, carrier assembly, ring gears, and seals. It also provides assembly instructions and specifies torque values and tools needed. Proper cleaning, application of sealant and anti-seize compound, and bearing preload are emphasized for correct reassembly.
Caterpillar cat 323 e l excavator (prefix rap) service repair manual (rap0000...fikkskmmdm
This document provides instructions for servicing the final drive of excavator models 323E L, 323E LN, and 323E SA. It details the disassembly and assembly procedures, including removing and installing the various components of the final drive such as the carrier assembly, ring gears, planetary gears, seals, and bearings. Precise instructions are given for tasks like loosening bolts in a specific sequence, applying sealant, measuring clearances, and setting bearing preloads to ensure correct reassembly.
Caterpillar cat 323 e sa excavator (prefix rap) service repair manual (rap000...ddkkddm
This document provides instructions for servicing the final drive of excavator models 323E L, 323E LN, and 323E SA. It includes procedures for disassembling and removing components like the final drive, carrier assembly, ring gears, and seals. It also provides assembly instructions and specifies torque values and tools needed. Proper cleaning, application of sealant and anti-seize compound, and alignment of pins and bolts is emphasized for correct reassembly.
Caterpillar Cat 323E SA Excavator (Prefix RAP) Service Repair Manual (RAP0000...jdjkskmikdkmd
This document provides instructions for servicing the final drive of excavator models 323E L, 323E LN, and 323E SA. It includes steps to disassemble and remove the final drive components, including the cover, carrier assemblies, ring gears, and seals. It also provides assembly instructions, specifying torque values and procedures for installing components like the bearings, seals, gears, and carrier assemblies back into the final drive housing. Tools required are listed. Detailed illustrations supplement the text instructions.
This document provides instructions for servicing the final drive of excavator models 323E L, 323E LN, and 323E SA. It includes procedures for disassembling and assembling the final drive components. The key steps are:
1. Remove the final drive from the excavator and disassemble its components, including the carrier assembly, ring gears, sun gears, and planetary gears.
2. Clean and inspect all parts, replacing any worn components.
3. Assemble the carrier assembly and other components in reverse order, applying anti-seize compound and torqueing bolts to the specified values.
4. Install the final drive back onto the excavator, ensuring proper alignment of parts
Caterpillar cat 345 b series ii excavator (prefix ald) service repair manual ...fjsekdmmeed
This document provides instructions for removing and installing a lifter group on a 3176C engine. The removal process involves taking out bolts and separating the lifter assembly into sections to remove individual components like brackets, lifters and injector lifters. The installation is the reverse of removal, requiring cleaning of parts and reinstallation in the proper order and orientation. Precautions are provided to contain fluids and dispose of them according to regulations.
Caterpillar cat 345 c excavator (prefix taj) service repair manual (taj00001 ...fjkskedmme
This document provides instructions for disassembling and assembling the final drive of a 345C excavator. The disassembly procedure involves removing over 15 parts from the final drive including the cover, ring gear, carrier assemblies, planetary gears, and sprocket housing. The assembly procedure instructs how to install new seals, bearing cups and cones, shims, and other parts in the reverse order of disassembly while ensuring proper bearing preload. Tools and torque specifications are provided for correctly reassembling the final drive.
Caterpillar cat 324 d ln excavator (prefix sym) service repair manual (sym000...jfksekmmdme
This document provides disassembly instructions for the final drive of a 324D L and 324D LN excavator. It outlines 32 steps to fully disassemble the final drive assembly, including removing gears, shafts, housings, seals, and other internal components. Cleanliness is emphasized to prevent dirt contamination during disassembly. Various specialty tools are listed that are required to remove retaining rings, pins, and other secured pieces. The document provides illustrations and detailed instructions for each step in the disassembly process.
Caterpillar cat 345 d l excavator (prefix kfh) service repair manual (kfh0000...hhfjksekmm
This document provides instructions for removing and installing various components of the rear gear group on a C13 engine, including:
1. The procedure for removing the rear gear group involves removing 10 components and using 2 required tools.
2. The installation procedure involves 11 steps and uses 1 required tool, and includes instructions for properly installing and positioning bearings.
3. Separate sections provide procedures for removing and installing the flywheel and crankshaft rear seal. Precautions are mentioned regarding handling heated parts and containing fluids.
Caterpillar cat 319 d l excavator (prefix zca) service repair manual (zca0000...fjkskedmme
This document provides assembly instructions for a final drive on an excavator model 319D L. It involves 37 steps including installing bearings, seals, gears, and other components into housings and covers. Precise measurements and torque specifications are required. Cleanliness is important throughout the process. The completed final drive and sprocket assembly weighs approximately 310 kg.
Caterpillar cat 312 c l excavator (prefix cbt) service repair manual (cbt0000...fksjksmmde
The document provides instructions for disassembling and assembling the swing drive of a 312C excavator. It describes removing over 20 individual parts in multiple steps to fully disassemble the swing drive. These parts include gears, shafts, bearings, seals, and housings. The assembly section then lists the parts and tools needed and describes the reverse process of installing the components in the proper order and applying sealants or fasteners as needed.
Caterpillar cat 325 d l excavator (prefix dbh) service repair manual (dbh0000...hfjsekekmmd
The document provides instructions for disassembling a service repair manual for excavator models 325D and 325D L. It lists required tools and a multi-step process to disassemble the final drive. Key steps include removing the final drive cover, carrier assembly, ring gears, and other internal components. Cleanliness is important during disassembly to prevent dirt from entering mechanisms.
Caterpillar cat 345 c excavator (prefix wde) service repair manual (wde00001 ...fjsekdmmeed
This document provides instructions for disassembling and assembling the final drive of a 345C excavator. The disassembly procedure involves removing 28 parts in 28 steps, including removing the final drive cover, ring gear, carrier assemblies, planetary gears, and sprocket housing. The assembly procedure involves installing 29 parts in 29 steps in the reverse order, adjusting bearing preload using shims, and applying anti-seize compound and thread lock to ensure proper assembly. Tools such as retaining ring pliers, eyebolts, and a transmission stand are required.
Caterpillar cat 345 d l excavator (prefix pbt) service repair manual (pbt0000...hhfjksekmm
This document provides disassembly and assembly instructions for the swing drive of a 345D L excavator. It details 32 steps to disassemble the swing drive components including removing the carrier assembly, sun gear, ring gear, and bearings. It also lists the required tools. The assembly section notes the importance of cleanliness and lists 13 tools needed for reassembling the swing drive components.
Caterpillar cat 345 d l excavator (prefix rgd) service repair manual (rgd0000...hhfjksekmm
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists 31 steps to fully disassemble the travel motor by removing components like the head, plates, seals, pins, brake piston, disks, and housing keys. Reassembly requires reversing the disassembly steps and ensuring parts are cleaned and placed back in their original locations and orientations. Special tools are listed to aid in removal and installation of components.
Caterpillar cat 422 f backhoe loader (prefix lrh) service repair manual (lrh0...ufjdfjjkskemme
This service repair manual provides instructions for repairing the transmission on a 422F Backhoe Loader. It details removing various transmission components including gears, shafts, seals, and bearings. Special tools are required to remove many parts and springs must be compressed to remove snap rings safely. Detailed illustrations accompany each step to ensure safe and proper repair of the transmission.
The document provides step-by-step instructions to disassemble a final drive assembly. It involves removing over 30 individual parts in a specific sequence, including covers, gears, shafts, seals, washers, and housings. Various tools are required to remove retaining rings, pins, bolts and separate connected pieces. Precautions are given regarding cleaning parts and using lifting devices due to components weighing up to 550 kg.
The document provides step-by-step instructions to disassemble a final drive assembly. It begins by positioning the final drive on a repair stand and removing bolts and covers. Then various gears, shafts, seals and housings are dismantled. Disassembly includes pressing components out of carrier assemblies and using punches to remove pins from shafts. The process separates the sprocket housing from the motor housing and removes more than 30 individual parts.
The document provides step-by-step instructions for disassembling the final drive of a 329DL excavator. It begins by removing the final drive assembly and placing it on a repair stand. Various components are then removed in order, including the cover, gears, shafts, carriers, pins and seals. Detailed illustrations accompany each step to show how to position lifting devices and tools. The process involves disassembling the planetary gears, carriers and housing sections to access all parts.
The document provides step-by-step instructions for disassembling the final drive of a 329DL excavator. It begins by removing the final drive assembly and placing it on a repair stand. Key steps include removing the cover, gears, shafts, carriers, and planetary gears. Tools needed are listed. Detailed illustrations accompany each step to show how to remove each component. Cleanliness is emphasized to prevent dirt from entering during disassembly.
The document provides step-by-step instructions for disassembling the final drive of a 329DL excavator. It begins by removing the final drive assembly and placing it on a repair stand. Key steps include removing the cover, gears, shafts, carriers, and planetary gears. Tools needed are listed. Detailed illustrations accompany each step to show how to remove each component. Cleanliness is emphasized to prevent dirt from entering during disassembly.
Caterpillar cat 323 e ln excavator (prefix rap) service repair manual (rap000...fikkskmmdm
This document provides instructions for servicing the final drive of excavator models 323E L, 323E LN, and 323E SA. It details the disassembly and assembly procedures, including removing and installing the various components of the final drive such as the carrier assembly, ring gears, planetary gears, seals, and bearings. Precise instructions are provided for tasks like loosening bolts in a specific sequence, applying sealant, measuring clearances, and setting bearing preloads to ensure proper reassembly.
Caterpillar cat 323 e l excavator (prefix rap) service repair manual (rap0000...fikkskkdmmd
This document provides instructions for servicing the final drive of excavator models 323E L, 323E LN, and 323E SA. It includes procedures for disassembling and removing components like the final drive, carrier assembly, ring gears, and seals. It also provides assembly instructions and specifies torque values and tools needed. Proper cleaning, application of sealant and anti-seize compound, and bearing preload are emphasized for correct reassembly.
Caterpillar cat 323 e l excavator (prefix rap) service repair manual (rap0000...fikkskmmdm
This document provides instructions for servicing the final drive of excavator models 323E L, 323E LN, and 323E SA. It details the disassembly and assembly procedures, including removing and installing the various components of the final drive such as the carrier assembly, ring gears, planetary gears, seals, and bearings. Precise instructions are given for tasks like loosening bolts in a specific sequence, applying sealant, measuring clearances, and setting bearing preloads to ensure correct reassembly.
Caterpillar cat 323 e sa excavator (prefix rap) service repair manual (rap000...ddkkddm
This document provides instructions for servicing the final drive of excavator models 323E L, 323E LN, and 323E SA. It includes procedures for disassembling and removing components like the final drive, carrier assembly, ring gears, and seals. It also provides assembly instructions and specifies torque values and tools needed. Proper cleaning, application of sealant and anti-seize compound, and alignment of pins and bolts is emphasized for correct reassembly.
Caterpillar Cat 323E SA Excavator (Prefix RAP) Service Repair Manual (RAP0000...jdjkskmikdkmd
This document provides instructions for servicing the final drive of excavator models 323E L, 323E LN, and 323E SA. It includes steps to disassemble and remove the final drive components, including the cover, carrier assemblies, ring gears, and seals. It also provides assembly instructions, specifying torque values and procedures for installing components like the bearings, seals, gears, and carrier assemblies back into the final drive housing. Tools required are listed. Detailed illustrations supplement the text instructions.
This document provides instructions for servicing the final drive of excavator models 323E L, 323E LN, and 323E SA. It includes procedures for disassembling and assembling the final drive components. The key steps are:
1. Remove the final drive from the excavator and disassemble its components, including the carrier assembly, ring gears, sun gears, and planetary gears.
2. Clean and inspect all parts, replacing any worn components.
3. Assemble the carrier assembly and other components in reverse order, applying anti-seize compound and torqueing bolts to the specified values.
4. Install the final drive back onto the excavator, ensuring proper alignment of parts
Caterpillar Cat 323E L Excavator (Prefix RAP) Service Repair Manual (RAP00001...jdjkskmikdkmd
This document provides instructions for servicing the final drive of excavator models 323E L, 323E LN, and 323E SA. It includes procedures for disassembling and removing components like the final drive, carrier assembly, ring gears, and seals. It also provides instructions for reassembling these components, including installing seals, bearings, and gears, and adjusting preload on the bearings. Torque specifications and required tools are listed.
Caterpillar cat 323 e sa excavator (prefix rap) service repair manual (rap000...fikkskkdmmd
This document provides instructions for servicing the final drive of excavator models 323E L, 323E LN, and 323E SA. It includes procedures for disassembling and removing components like the final drive, carrier assembly, ring gears, and seals. It also provides instructions for reassembling these components, including installing seals, bearings, and gears, and adjusting preload on the bearings. Torque specifications and required tools are listed.
Similar to Caterpillar cat 329 dl excavator (prefix mnb) service repair manual (mnb00001 and up) (13)
Toyota 8 fbmt20 forklift service repair manualfksjksmmde
This manual provides service procedures for Toyota forklifts models 8FBET15-20, 8FBEKT16,18, and 8FBMT15-20. It covers topics such as vehicle components, drive unit removal and installation, drive unit disassembly and reassembly procedures, and points of inspection. The manual is intended to enable quick and correct servicing of these forklift models. It notes that specifications and designs may have changed by November 2010 and any updates would be provided in Toyota service newsletters.
Toyota 8 fbmt18 forklift service repair manualfksjksmmde
This manual provides service procedures for Toyota forklifts models 8FBET15-20, 8FBEKT16,18, and 8FBMT15-20. It covers topics such as vehicle components, drive unit removal and installation, drive unit disassembly and reassembly procedures, and inspection points. Technicians are instructed to use this manual along with special service tools for correct and quick servicing of these forklift models. The manual describes specifications, components, and repair processes in detail along with notes on inspection points and proper use of service tools.
Toyota 8 fbmt16 forklift service repair manualfksjksmmde
This manual provides service procedures for Toyota forklifts models 8FBET15-20, 8FBEKT16,18, and 8FBMT15-20. It covers topics such as vehicle components, drive unit removal and installation, drive unit disassembly and reassembly procedures, and points of inspection. The manual is intended to enable quick and correct servicing of these forklift models. It notes that specifications and designs may have changed by November 2010 and any updates would be provided in Toyota service newsletters.
Toyota 8 fbmt15 forklift service repair manualfksjksmmde
This manual provides service procedures for Toyota forklifts models 8FBET15-20, 8FBEKT16,18, and 8FBMT15-20. It covers topics such as vehicle components, drive unit removal and installation, drive unit disassembly and reassembly procedures, and inspection points. Technicians are instructed to use special service tools when removing certain components. Tolerances and torque specifications are provided for adjustments and installations.
Toyota 8 fbet20 forklift service repair manualfksjksmmde
This manual provides service procedures for Toyota forklifts models 8FBET15-20, 8FBEKT16,18, and 8FBMT15-20. It covers topics such as vehicle components, drive unit removal and installation, drive unit disassembly and reassembly procedures, and points of inspection. The manual is intended to enable quick and correct servicing of these forklift models. It notes that specifications and designs may have changed by November 2010 and any updates would be provided in Toyota service newsletters.
Toyota 8 fbet18 forklift service repair manualfksjksmmde
This manual provides service procedures for Toyota forklifts models 8FBET15-20, 8FBEKT16,18, and 8FBMT15-20. It covers topics such as vehicle components, drive unit removal and installation, drive unit disassembly and reassembly procedures, and inspection points. Technicians are instructed to use this manual along with special service tools for correct and quick servicing of the forklift models. The manual also provides specifications, component figures, lubrication charts, and periodic maintenance guidelines.
Toyota 8 fbet16 forklift service repair manualfksjksmmde
This manual provides service procedures for Toyota forklifts models 8FBET15-20, 8FBEKT16,18, and 8FBMT15-20. It covers topics such as vehicle components, drive unit removal and installation, drive unit disassembly and reassembly procedures, and inspection points. Technicians are instructed to use special service tools when removing certain components. Tolerances and torque specifications are provided for adjustments and installations.
Human: Thank you for the summary. Can you provide a more concise summary in 2 sentences or less?
Toyota 8 fbet15 forklift service repair manualfksjksmmde
This manual provides service procedures for Toyota forklifts models 8FBET15-20, 8FBEKT16,18, and 8FBMT15-20. It covers topics such as vehicle components, drive unit removal and installation, drive unit disassembly and reassembly procedures, and inspection points. Technicians are instructed to use special service tools when removing certain components. Tolerances and torque specifications are provided for adjustments and installations.
Toyota 8 fbekt18 forklift service repair manualfksjksmmde
This manual provides service procedures for Toyota forklifts models 8FBET15-20, 8FBEKT16,18, and 8FBMT15-20. It covers topics such as vehicle components, drive unit removal and installation, drive unit disassembly and reassembly procedures, and inspection points. Technicians are instructed to use this manual along with special service tools for correct and quick servicing of these forklift models. The manual describes specifications, components, and repair processes in detail along with notes on inspection points and proper usage of service tools.
Toyota 8 fbekt16 forklift service repair manualfksjksmmde
This manual provides service procedures for Toyota forklifts models 8FBET15-20, 8FBEKT16,18, and 8FBMT15-20. It covers topics such as vehicle components, drive unit removal and installation, drive unit disassembly and reassembly procedures, and points of inspection. The manual is intended to enable quick and correct servicing of these forklift models. It notes that specifications and designs may have changed by November 2010 and any updates would be provided in Toyota service newsletters.
Toyota 7 fgu32 forklift service repair manualfksjksmmde
This manual covers service procedures for Toyota forklifts. It provides 3 main points:
1. It details specifications, components, removal/installation, and inspection/adjustment procedures for the engine, including the 4Y and 1DZ-11 engines.
2. It describes the air cleaner, radiator, muffler, battery, and other engine systems. Specifications, components, and maintenance procedures are outlined.
3. Throttle and engine speed adjustments are explained, along with idle up speed inspection for the 4Y engine. Troubleshooting tips are also provided.
Toyota 7 fgu30 forklift service repair manualfksjksmmde
This document provides service procedures for Toyota forklifts. It summarizes engine specifications, maintenance, and repair for the 4Y and 1DZ-11 engines. Procedures are outlined for tasks like engine removal and installation, air bleeding, speed inspection and adjustment, maintenance of components like the air cleaner, radiator, and muffler. Safety cautions are provided throughout.
Toyota 7 fgu25 forklift service repair manualfksjksmmde
This document provides service procedures for Toyota forklifts. It summarizes engine specifications, maintenance, and repair for the 4Y and 1DZ-11 engines. Procedures are outlined for tasks like engine removal and installation, air bleeding, speed inspection and adjustment, maintenance of components like the air cleaner, radiator, and muffler. Safety cautions are provided throughout.
Toyota 7 fgu20 forklift service repair manualfksjksmmde
This document provides service procedures for Toyota forklifts. It summarizes engine inspection and adjustment procedures. It describes adjusting the idle speed and idle up speed for 4Y gasoline engines by adjusting screws A and B. The idle up speed standard is 1000 ± 30 rpm, while the idling speed standard is 800 ± 5 rpm. For LPG/gasoline engines, the idle up speed standard is 1000 ± 30 rpm and the idling speed standard is 800 ± 5 rpm. The document also provides an overview of air bleeding for diesel fuel systems and specifications for 4Y and 1DZ-11 engines.
Toyota 7 fgu18 forklift service repair manualfksjksmmde
This document provides service procedures for Toyota forklifts. It summarizes engine specifications, maintenance, and repair procedures. Key details include:
1) Specifications for 4Y and 1DZ-11 gasoline and diesel engines including bore, stroke, displacement, power and torque outputs.
2) Procedures for removing and installing the engine, bleeding air from the fuel system, and inspecting/adjusting engine speed.
3) Maintenance items like inspecting the air cleaner, radiator, muffler, battery and belts. It also covers the accelerator pedal, speed control system, and troubleshooting.
Toyota 7 fgu15 forklift service repair manualfksjksmmde
This manual covers service procedures for Toyota forklifts. It provides 3 main points:
1. It details specifications, components, removal/installation, and inspection/adjustment procedures for the engine, including the 4Y and 1DZ-11 engines.
2. It describes engine-related components like the air cleaner, radiator, muffler, and battery.
3. It covers other engine systems such as the accelerator pedal, vehicle speed control system, and troubleshooting. Concise summaries and point operations are included to highlight key steps and cautions.
Toyota 7 fgcu32 forklift service repair manualfksjksmmde
This manual covers service procedures for Toyota forklifts. It provides 3 main points:
1. It details specifications, components, removal/installation, and inspection/adjustment procedures for the engine, including the 4Y and 1DZ-11 engines.
2. It describes engine-related components like the air cleaner, radiator, muffler, and battery.
3. It covers other engine systems such as the accelerator pedal, vehicle speed control system, and troubleshooting. The manual provides operational tips and safety information to correctly service corresponding forklift models.
Toyota 7 fgcu30 forklift service repair manualfksjksmmde
This manual covers service procedures for Toyota forklifts. It provides 3 main points:
1. It details specifications, components, removal/installation, and inspection/adjustment procedures for the engine, including the 4Y and 1DZ-11 engines.
2. It describes engine-related components like the air cleaner, radiator, muffler, and battery.
3. It covers other engine systems such as the accelerator pedal, vehicle speed control system, and troubleshooting. Concise summaries and point operations are included to highlight key steps and cautions.
Toyota 7 fgcu25 forklift service repair manualfksjksmmde
This document provides service procedures for Toyota forklifts. It covers engine removal and installation, inspection and adjustment of various engine components like the air cleaner, radiator, muffler, and battery. Procedures for inspecting and adjusting engine speed on 4Y and 1DZ-11 engines are described. The accelerator pedal, vehicle speed control system, and other controls are also covered. Precautions for different steps are highlighted. Specifications and components for various engine parts are included for reference.
Massey ferguson mf290 xtra tractors (india) parts catalogue manualfksjksmmde
This document contains parts listings and technical specifications for engine components of Massey Ferguson 275/290 XTRA tractors. It includes sections for the engine, cylinder block, crankshaft, pistons, cylinder head, intake/exhaust valves, camshaft, cylinder head cover, and timing gear housing. Each section lists the relevant parts, quantities, descriptions, and any special notes or variations between different models/regions.
Kalyan chart DP boss guessing matka results➑➌➋➑➒➎➑➑➊➍
8328958814Satta Matka is a number-based game. There are several markets, each with its owner responsible for releasing the lottery satta Matka market results on time. Kalyan market, Worli market, main Mumbai market, Rajdhani market, and Milan market are some of the main markets or bazaars involved in the satta Matka game. The oldest and most legitimate markets are in Kalyan and Main Mumbai. Every Satta Market has an open and close time. The satta results for these markets are published on or shortly after the open and close times. During the open result, two numbers are decoded, one of which is a three-digit number and the other a single-digit number. Similarly, three-digit and single-digit numbers are declared during the satta market's close. The last digit after adding the three digits of the open or close result is usually the single digit declared during the open and close results.KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAINSATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSSdp boss net, dp satta, dpboss dpboss, indian satta matka, kalyan matkà result today , matka boss, matka result live, matka satta result today, satamatka com, satta boss, satta matka king, sattamatkà, sattamatkà result, sattamatta com, sattmatka sattmatka, star matka, tara matka, tara satta matka, worli matka, indian matka, matka live, kalyan guessing, satta fix, kalyan final ank, dp matka, dpboss net, sata mata com, सट्टा मटका, sattamatkà 143, golden matka, satta matta matka 143, satta fast, kalyan open, satta 143, dpboss 143 guessing, dpboss satta, golden satta matka, satta bajar
Satta Matka Market is India's leading website providing the quickest sattamatka outcome, experienced in Satta Matka game. Our services include free Satta Matka Trick and Tips for Kalyan Matka and Disawar Satta King, as well as satta matka graphs, online play, tips and more. Our team of experts strive to help you recoup your losses quickly through our proposals such as Free Satta Matka Tips and Kalyan Bazar Tips. We are known as India's best Matka DpBoss portal site, here to deliver updates on all sorts of Satta Market like Kalyan Bazar, Milan, Rajdhani, Time Bazaar, Main and the most current charts. Stay tuned with us for more live updates on the Satta market
Top-Quality AC Service for Mini Cooper Optimal Cooling PerformanceMotor Haus
Ensure your Mini Cooper stays cool and comfortable with our top-quality AC service. Our expert technicians provide comprehensive maintenance, repairs, and performance optimization, guaranteeing reliable cooling and peak efficiency. Trust us for quick, professional service that keeps your Mini Cooper's air conditioning system in top condition, ensuring a pleasant driving experience year-round.
2. 3. Remove bolts (1) and the washers that hold the cover in position.
Illustration 2 g00708090
4. Remove the setscrews from the cover. Fasten Tooling (B) and a suitable lifting device to
cover (2), as shown. The weight of cover (2) is approximately 32 kg (70 lb). Remove cover
(2).
Illustration 3 g00708091
5. Remove thrust plate (3) from cover (2).
6. Remove plugs (4) from cover (2).
4/12
329D & 329D L Excavators MNB00001-UP (MACHINE) POWERED BY C7 Engine...
2020/3/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
3. Illustration 4 g00708235
7. Remove O-ring seals (5) from both plugs (4) that were in the cover.
Illustration 5 g00708092
8. Remove spacer (6) from carrier assembly (7).
9. Remove sun gear (8) from carrier assembly (7).
10. Remove carrier assembly (7) by lifting the carrier assembly straight up. The weight of
carrier assembly (7) is approximately 14 kg (30 lb).
Illustration 6 g01304883
11. Disassemble carrier assembly (7), as follows.
a. Drive spring pin (10) into planetary shaft (9) with a hammer and a punch.
5/12
329D & 329D L Excavators MNB00001-UP (MACHINE) POWERED BY C7 Engine...
2020/3/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
4. Illustration 7 g00708144
b. Remove planetary shaft (9) with spring pin (10) from the carrier assembly.
c. Remove spring pin (10) from planetary shaft (9) with a hammer and a punch.
Illustration 8 g00708218
d. Remove thrust washers (11) and planetary gear (13) from the carrier assembly.
e. Remove bearing (12) from planetary gear (13).
12. Repeat Steps 11.a through 11.e in order to remove the remaining planetary gears from the
carrier assembly.
6/12
329D & 329D L Excavators MNB00001-UP (MACHINE) POWERED BY C7 Engine...
2020/3/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
5. Illustration 9 g00708162
13. Remove sun gear (14) from carrier assembly (15).
Illustration 10 g00708325
14. Remove spacer (16).
Illustration 11 g00708184
Note: It will be necessary to pry ring gears (17) away from main housing (18) in order to
install the lifting slings.
15. Fasten a suitable lifting device to ring gears (17), as shown. Remove the ring gears from
main housing (18). The weight of ring gears (17) is approximately 45 kg (100 lb).
7/12
329D & 329D L Excavators MNB00001-UP (MACHINE) POWERED BY C7 Engine...
2020/3/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
6. Illustration 12 g00708360
16. Use a screwdriver or a chisel in order to separate the two ring gears (17).
Note: The two ring gears are held together with Tooling (F). It may be necessary to heat the
ring gears in order to soften the sealant. Do not heat over 135 °C (275 °F) for more than
thirty minutes.
Illustration 13 g00708172
17. Position a 12.7 mm (0.50 inch) shackle under carrier assembly (15).
18. Fasten a suitable lifting device to the shackle.
19. Slowly lift carrier assembly (15) from the final drive. The weight of carrier assembly (15) is
approximately 39 kg (85 lb).
20. Disassemble carrier assembly (15), as follows.
Illustration 14 g00708175
a. Drive spring pin (20) into planetary shaft (19) with a hammer and a punch.
8/12
329D & 329D L Excavators MNB00001-UP (MACHINE) POWERED BY C7 Engine...
2020/3/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
7. Illustration 15 g00708370
Illustration 16 g00708220
b. Remove planetary shaft (19) with spring pin (20) from the carrier assembly.
c. Remove spring pin (20) from planetary shaft (19) with a hammer and a punch.
d. Remove thrust washers (21) and planetary gear (23) from the carrier assembly.
e. Remove bearings (22) from planetary gear (23).
21. Repeat Steps 20.a through 20.e in order to remove the remaining planetary gears from the
carrier.
9/12
329D & 329D L Excavators MNB00001-UP (MACHINE) POWERED BY C7 Engine...
2020/3/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
8. Illustration 17 g00708186
22. Remove O-ring seal (24) from main housing (18).
Illustration 18 g00708187
23. Remove bolts (25) from gear (26).
Illustration 19 g00708202
24. Use Tooling (C) in order to remove gear (26) from main housing (18).
Note: The motor housing will separate from the main housing (18) once gear (26) is
removed. Make sure that the motor housing is supported.
10/12
329D & 329D L Excavators MNB00001-UP (MACHINE) POWERED BY C7 Engi...
2020/3/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
9. Illustration 20 g00708211
25. Remove shims (27) from the main housing.
Illustration 21 g00708212
26. Fasten Tooling (D) and a suitable lifting device to main housing (18), as shown.
27. Use a hammer and a punch in order to separate main housing (18) and the final drive
sprocket from the motor housing (28). The combined weight of main housing (18) and the
final drive sprocket is approximately 82 kg (180 lb).
Illustration 22 g00708214
28. Remove Duo-Cone seal (29) from motor housing (28).
29. Remove alignment pins (30).
11/12
329D & 329D L Excavators MNB00001-UP (MACHINE) POWERED BY C7 Engi...
2020/3/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
10. Illustration 23 g00708215
Illustration 24 g00708216
30. Remove Duo-Cone seal (31) from main housing (18).
31. Use Tooling (E) in order to remove bearings (32) and (33) from the main housing.
32. If necessary, remove the final drive sprocket from the main housing.
33. Refer to Disassembly and Assembly, "Final Drive Sprocket - Remove and Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Mar 3 23:41:49 UTC+0800 2020
12/12
329D & 329D L Excavators MNB00001-UP (MACHINE) POWERED BY C7 Engi...
2020/3/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
11. Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 138-7573 Link Bracket 2
C 1P-1863 Retaining Ring Pliers 1
D 138-7575 Link Bracket 3
E 4C-8359 Eyebolt 2
F 138-7574 Link Bracket 2
G 138-7576 Link Bracket 2
Start By:
a. Start by removing the final drive. Refer to Disassembly and Assembly, "Final Drive -
Remove".
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of
the component should be thoroughly cleaned. This will prevent dirt from entering the
internal mechanism.
1. Put an alignment mark across the sections of the final drive for assembly purposes. The
parts must be reinstalled to the original locations.
Illustration 1 g00892878
2. Use Tooling (G) and a suitable lifting device to position the final drive assembly onto
Tooling (A). The weight of the final drive assembly is approximately 550 kg (1200 lb).
3. Remove bolts (1).
3/13
329D & 329D L Excavators MNB00001-UP (MACHINE) POWERED BY C7 Engine...
2020/3/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
12. Illustration 2 g00892883
4. Use Tooling (B) and a suitable lifting device to remove cover (2). The weight of cover (2) is
approximately 32 kg (70 lb).
Illustration 3 g00892888
5. Remove bolts (3) and gear (4). Check plate (6). Replace plate (6) if plate (6) is worn.
Remove plugs (5) from cover (2).
Illustration 4 g00892906
6. Remove O-ring seals (7) from plugs (5).
4/13
329D & 329D L Excavators MNB00001-UP (MACHINE) POWERED BY C7 Engine...
2020/3/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
13. Illustration 5 g00892930
7. Remove gear (8) and spacer (9).
Illustration 6 g00892965
8. Use Tooling (C) to remove retaining ring (10). Remove washer (11) and gear (12). Remove
bearing assembly (13) and washer (14).
9. Repeat Step 8 for the other two gear assemblies.
Illustration 7 g00892968
10. Remove retaining ring (15).
5/13
329D & 329D L Excavators MNB00001-UP (MACHINE) POWERED BY C7 Engine...
2020/3/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
14. Illustration 8 g00892975
11. Remove carrier assembly (16).
Illustration 9 g01389804
12. Use a suitable press to remove the shafts from carrier assembly (16).
Illustration 10 g00892977
6/13
329D & 329D L Excavators MNB00001-UP (MACHINE) POWERED BY C7 Engine...
2020/3/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
15. 13. Remove gear (17) and spacer (18).
Illustration 11 g00892997
14. Use Tooling (D) and a suitable lifting device to remove planetary carrier (19). The weight of
planetary carrier (19) is approximately 48 kg (105 lb).
Illustration 12 g00893019
15. Remove retaining ring (21). Lift planetary carrier (19) off sun gear (20).
Illustration 13 g00896860
16. Drive spring pin (23) into planetary shaft (22).
7/13
329D & 329D L Excavators MNB00001-UP (MACHINE) POWERED BY C7 Engine...
2020/3/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
16. Illustration 14 g00893043
17. Remove planetary shaft (22). Use a suitable punch to remove spring pin (23) from planetary
shaft (22).
Illustration 15 g00896863
18. Remove washers (24) and bearing (25) from planetary gear (26).
19. Repeat Steps 16 through 18 for the other two planetary gears.
Illustration 16 g01842853
20. Remove gear (27). Remove spacer (27A).
8/13
329D & 329D L Excavators MNB00001-UP (MACHINE) POWERED BY C7 Engine...
2020/3/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
17. Illustration 17 g01842974
21. Use two people to remove carrier assembly (28). The weight of carrier assembly (28) is
approximately 38 kg (85 lb).
Illustration 18 g01843140
22. Drive spring pin (30) into shaft (29).
Illustration 19 g00893658
23. Remove shaft (29). Use a suitable punch to remove spring pin (30) from shaft (29).
9/13
329D & 329D L Excavators MNB00001-UP (MACHINE) POWERED BY C7 Engine...
2020/3/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
18. Illustration 20 g00893674
24. Remove washers (31) and bearings (32) from planetary gear (33).
25. Repeat Steps 22 through 24 for the other three planetary gears.
Illustration 21 g01208300
26. Fasten Tooling (E) and a suitable lifting device to ring gear (34), as shown. Remove ring
gear (34) from sprocket housing (35). The weight of ring gear (34) is approximately 66 kg
(146 lb).
Illustration 22 g01208542
10/13
329D & 329D L Excavators MNB00001-UP (MACHINE) POWERED BY C7 Engi...
2020/3/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
19. 27. Remove O-ring seal (36) from sprocket housing (35).
Illustration 23 g01208553
28. Remove bolts (37) from coupling gear (38).
Illustration 24 g01208572
29. Install suitable forcing bolts (39) in coupling gear (38). Tighten the forcing bolts evenly in
order to loosen coupling gear (38). Remove the coupling gear from the motor housing.
Illustration 25 g01208578
11/13
329D & 329D L Excavators MNB00001-UP (MACHINE) POWERED BY C7 Engi...
2020/3/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
20. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
21. Illustration 26 g01208625
30. Remove shims (40) from the motor housing.
Note: Inner cones and outer bearing cones (42) are a slip fit on the motor housing. While
you remove sprocket housing (35) from the motor housing, inner bearing cone (42) may
stay with the sprocket housing or the inner bearing cone may stay on the motor housing.
31. Fasten Tooling (F) and a suitable lifting device to sprocket housing (35). Separate the
sprocket housing from the motor housing. The weight of sprocket housing (35) is
approximately 109 kg (240 lb).
Illustration 27 g01208626
32. Remove the locating pins from the motor housing.
33. Remove Duo-Cone seal (41) from the motor housing.
34. If inner bearing cone (42) remained on the motor housing, then remove the inner bearing
cone.
12/13
329D & 329D L Excavators MNB00001-UP (MACHINE) POWERED BY C7 Engi...
2020/3/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
22. Illustration 28 g01208633
35. Remove Duo-Cone seal (43) from the sprocket housing.
36. If inner bearing cone (42) remained on the sprocket housing, then remove the inner bearing
cone.
37. Remove the bearing cups from the sprocket housing.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Mar 3 23:42:45 UTC+0800 2020
13/13
329D & 329D L Excavators MNB00001-UP (MACHINE) POWERED BY C7 Engi...
2020/3/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...