This document provides assembly instructions for the final drive of an excavator model 325B L. It includes:
- A list of required tools and parts for assembly
- Detailed step-by-step instructions on installing bearings, seals, gears, carriers, and other components
- Procedures for determining correct bearing preload and shim thickness
- Instructions on installing retaining rings, pins, and seals in the proper orientation
The assembly process involves precisely fitting multiple gears, carriers, and housings to ensure proper alignment and engagement of all components. Measurements are taken and compared to specifications to verify correct assembly.
Caterpillar cat 365 b l mh excavator (prefix cty) service repair manual (cty0...fjjskekdmme
This document provides assembly instructions for a final drive in 29 steps. It begins by cleaning all parts and checking seals. It then details assembling bearings and gears in sequence using various tools. Precise measurements are taken to determine the correct shim thickness for proper bearing preload. Multiple planetary gear carrier assemblies are installed along with retaining rings and bolts. Proper torque specifications are listed throughout.
Caterpillar cat 325 d excavator (prefix kbe) service repair manual (kbe00001 ...hfjsekekmmd
The document provides instructions for repairing the final drive of excavator models 325D and 325D L. It involves 14 steps including cleaning parts, applying lubricants, installing seals and bearings, adjusting bearing preload, and assembling components like the carrier assembly, planetary gears, and ring gear. Proper torque values and alignment of pins are emphasized throughout the process to ensure correct assembly.
Caterpillar cat 345 d l excavator (prefix byc) service repair manual (byc0000...hhfjksekmm
This document provides instructions for removing and installing various components of the rear gear group on a 345D L Excavator powered by a C13 engine, including:
1. The procedures include removing the electric starting motor, flywheel, rear crankshaft seal, gears, bushings, bearings, and covers.
2. Detailed installation instructions are also provided, including proper tooling, torque specifications, and ensuring correct dimensions and alignments of components.
3. Removal and installation of the flywheel and rear crankshaft seal are also described following similar procedures.
This document provides instructions for assembling a torque converter for a 730 Articulated Truck. It lists 43 steps to assemble the various components of the torque converter in the correct order. Safety precautions are provided at the beginning regarding lifting heavy components and containing fluids. Diagrams illustrate each step. The summary ends by stating to connect the assembled torque converter housing to the planetary transmission.
Caterpillar cat 319 d l excavator (prefix zca) service repair manual (zca0000...fjkskedmme
This document provides assembly instructions for a final drive on an excavator model 319D L. It involves 37 steps including installing bearings, seals, gears, and other components into housings and covers. Precise measurements and torque specifications are required. Cleanliness is important throughout the process. The completed final drive and sprocket assembly weighs approximately 310 kg.
Caterpillar cat 325 d l excavator (prefix dbh) service repair manual (dbh0000...hfjsekekmmd
The document provides instructions for disassembling a service repair manual for excavator models 325D and 325D L. It lists required tools and a multi-step process to disassemble the final drive. Key steps include removing the final drive cover, carrier assembly, ring gears, and other internal components. Cleanliness is important during disassembly to prevent dirt from entering mechanisms.
Caterpillar cat 325 d l excavator (prefix azp) service repair manual (azp0000...hfjsekekmmd
The document provides instructions for disassembling a service repair manual for excavator models 325D and 325D L. It lists required tools and a 33-step procedure that includes removing components like the final drive, cover, gears, seals, and housing pieces. Cleanliness is important during disassembly. Parts must be reinstalled in their original locations and lifting is required as component weights range from 30 to 688 pounds.
Caterpillar cat 330 d excavator (prefix edx) service repair manual (edx00001 ...hhjsekmdmm
The document provides instructions for assembling the swing drive of an excavator. It describes 30 steps for installing bearings, gears, seals, and other components into the swing drive housing. Tools required include pliers, link brackets, a torque wrench, and sealant. Proper cleaning and lubrication of parts is emphasized. Weights of components are provided to note the number of people needed for installation.
Caterpillar cat 365 b l mh excavator (prefix cty) service repair manual (cty0...fjjskekdmme
This document provides assembly instructions for a final drive in 29 steps. It begins by cleaning all parts and checking seals. It then details assembling bearings and gears in sequence using various tools. Precise measurements are taken to determine the correct shim thickness for proper bearing preload. Multiple planetary gear carrier assemblies are installed along with retaining rings and bolts. Proper torque specifications are listed throughout.
Caterpillar cat 325 d excavator (prefix kbe) service repair manual (kbe00001 ...hfjsekekmmd
The document provides instructions for repairing the final drive of excavator models 325D and 325D L. It involves 14 steps including cleaning parts, applying lubricants, installing seals and bearings, adjusting bearing preload, and assembling components like the carrier assembly, planetary gears, and ring gear. Proper torque values and alignment of pins are emphasized throughout the process to ensure correct assembly.
Caterpillar cat 345 d l excavator (prefix byc) service repair manual (byc0000...hhfjksekmm
This document provides instructions for removing and installing various components of the rear gear group on a 345D L Excavator powered by a C13 engine, including:
1. The procedures include removing the electric starting motor, flywheel, rear crankshaft seal, gears, bushings, bearings, and covers.
2. Detailed installation instructions are also provided, including proper tooling, torque specifications, and ensuring correct dimensions and alignments of components.
3. Removal and installation of the flywheel and rear crankshaft seal are also described following similar procedures.
This document provides instructions for assembling a torque converter for a 730 Articulated Truck. It lists 43 steps to assemble the various components of the torque converter in the correct order. Safety precautions are provided at the beginning regarding lifting heavy components and containing fluids. Diagrams illustrate each step. The summary ends by stating to connect the assembled torque converter housing to the planetary transmission.
Caterpillar cat 319 d l excavator (prefix zca) service repair manual (zca0000...fjkskedmme
This document provides assembly instructions for a final drive on an excavator model 319D L. It involves 37 steps including installing bearings, seals, gears, and other components into housings and covers. Precise measurements and torque specifications are required. Cleanliness is important throughout the process. The completed final drive and sprocket assembly weighs approximately 310 kg.
Caterpillar cat 325 d l excavator (prefix dbh) service repair manual (dbh0000...hfjsekekmmd
The document provides instructions for disassembling a service repair manual for excavator models 325D and 325D L. It lists required tools and a multi-step process to disassemble the final drive. Key steps include removing the final drive cover, carrier assembly, ring gears, and other internal components. Cleanliness is important during disassembly to prevent dirt from entering mechanisms.
Caterpillar cat 325 d l excavator (prefix azp) service repair manual (azp0000...hfjsekekmmd
The document provides instructions for disassembling a service repair manual for excavator models 325D and 325D L. It lists required tools and a 33-step procedure that includes removing components like the final drive, cover, gears, seals, and housing pieces. Cleanliness is important during disassembly. Parts must be reinstalled in their original locations and lifting is required as component weights range from 30 to 688 pounds.
Caterpillar cat 330 d excavator (prefix edx) service repair manual (edx00001 ...hhjsekmdmm
The document provides instructions for assembling the swing drive of an excavator. It describes 30 steps for installing bearings, gears, seals, and other components into the swing drive housing. Tools required include pliers, link brackets, a torque wrench, and sealant. Proper cleaning and lubrication of parts is emphasized. Weights of components are provided to note the number of people needed for installation.
Caterpillar cat 318 f l excavator (prefix fft) service repair manual (fft0000...fjkskedmme
This document provides disassembly instructions for the final drive of a 318F L excavator. It describes 41 steps to fully disassemble the final drive components. Key steps include removing the sprocket, pistons, barrel assembly, springs, and various seals and plates. Safety warnings are provided to release pressures and contain fluids safely.
Caterpillar cat 385 c l excavator (prefix sbe) service repair manual (sbe0000...fjkskedmme
This document provides instructions for disassembling and assembling the final drive of a 385C L Excavator. It lists the required tools and gives step-by-step instructions to remove components such as the housing cover, carrier assemblies, planetary gear assemblies, ring gear, and motor housing. Precautions are given to ensure cleanliness during disassembly and assembly. The parts are to be reinstalled in their original locations and orientation marks should be made for alignment. Proper lifting devices and techniques are specified due to the heavy weights of some components.
Caterpillar cat 345 b series ii excavator (prefix ald) service repair manual ...fjsekdmmeed
This document provides instructions for removing and installing a lifter group on a 3176C engine. The removal process involves taking out bolts and separating the lifter assembly into sections to remove individual components like brackets, lifters and injector lifters. The installation is the reverse of removal, requiring cleaning of parts and reinstallation in the proper order and orientation. Precautions are provided to contain fluids and dispose of them according to regulations.
Caterpillar cat 345 d l excavator (prefix yee) service repair manual (yee0000...hhfjksekmm
This document provides instructions for removing and installing various components of the rear gear group and crankshaft rear seal of a 345D L Excavator with a C13 engine. The removal procedure includes using various tools to remove bolts, seals, gears, bushings, and bearings. The installation procedure provides instructions on cleaning, inspecting, applying threadlock, and installing components while ensuring proper dimensions and alignments are met. Torque specifications and notes are provided throughout.
Caterpillar cat 345 c l hydraulic excavator (prefix pjw) service repair manua...hhfjksekmm
The document provides assembly instructions for a 345C excavator final drive system in 3 steps:
1. Adjust the bearing preload of the final drive by measuring dimensions and determining the correct shim thickness.
2. Assemble the carrier assemblies, which include installing planetary gears, bearings, shafts, and pins into housings.
3. Install the assembled carrier assemblies into the sprocket and ring gears in the correct order.
Caterpillar cat d11 t track type tractor dozer bulldozer (prefix mdg) service...fjjsjeskkekem
This document provides assembly instructions for a final drive on a D11T track-type tractor. It lists 37 steps and required tools to assemble the final drive components which include installing bearings and seals using specialized tools, torquing bolts to specified values, and checking clearances with feeler gauges. Pictures accompany each step to illustrate the assembly process.
Caterpillar cat 345 b excavator (prefix ayr) service repair manual (ayr00001 ...fjsekdmmeed
This document provides instructions for disassembling and assembling the final drive of an excavator model 345B. It describes removing components such as the travel motor, final drive, ring gear, and carrier assemblies. Detailed steps are provided to disassemble each assembly into individual parts. The assembly section instructs cleaning and inspecting parts, applying anti-seize compound, and installing components in reverse order using lifting tools and following markings made during disassembly. Proper bearing preload is set by measuring clearance with shims.
Caterpillar cat 345 d l excavator (prefix kfh) service repair manual (kfh0000...hhfjksekmm
This document provides instructions for removing and installing various components of the rear gear group on a C13 engine, including:
1. The procedure for removing the rear gear group involves removing 10 components and using 2 required tools.
2. The installation procedure involves 11 steps and uses 1 required tool, and includes instructions for properly installing and positioning bearings.
3. Separate sections provide procedures for removing and installing the flywheel and crankshaft rear seal. Precautions are mentioned regarding handling heated parts and containing fluids.
Caterpillar cat 993 k wheel loader (prefix z9k) service repair manual (z9k000...ufjkskemfseol
This document provides instructions for disassembling the transmission planetary gears of a 993K wheel loader. It is a 26 step process that includes removing housing components, shafts, bearings, seals, springs, discs, and plates. Special tools are required, and parts should be cleaned before assembly. Detailed illustrations are provided for each step to ensure correct disassembly.
Caterpillar cat 323 f ln excavator (prefix yec) service repair manual (yec000...fjjskekdmme
This service repair manual provides instructions for assembling the final drive of a 323F LN Excavator. It outlines 37 steps requiring various tools to install bearings, seals, gears, pins, and other components in the proper order. Proper preloading of bearings is important. Gaskets and seals must be clean and lubricated before installation. Weights of individual components are provided to assist with assembly. Upon completion, the final drive is installed on the excavator.
Caterpillar cat 345 d l excavator (prefix jkn) service repair manual (jkn0000...hhfjksekmm
The document provides instructions for assembling a travel motor. It describes 33 steps to assemble parts like pistons, seals, plates, springs and valves. Measurements are checked with tools at several steps to ensure correct assembly. Cleaning parts and preventing contamination of hydraulic systems is emphasized.
Caterpillar cat 324 d l excavator (prefix pyt) service repair manual (pyt0000...jfksekmmdme
This document provides instructions for assembling the final drive of a 324D L excavator. It outlines 30 steps, including installing bearings and seals, determining the correct shim thickness, and joining the main housing to the motor housing. Cleanliness is emphasized throughout the assembly process to prevent contamination. Various tools are required, and components should be lubricated before assembly.
Caterpillar cat 365 b excavator (prefix 9tz) service repair manual (9tz00001 ...fios9dkksd
This document provides instructions for disassembling and assembling the final drive of a 365B L excavator. It describes in detail the 31 steps to disassemble the components of the final drive, including removing gears, shafts, carriers, and housing pieces. It then lists the 34 assembly steps, specifying the required tools and explaining how to install components like bearings, seals, gears, and housings back into the final drive. Precautions like cleaning parts and applying lubricants are noted.
Caterpillar cat 365 b mh excavator (prefix cty) service repair manual (cty000...fjjskekdmme
This document provides assembly instructions for a final drive in 29 steps. It begins by cleaning all parts and checking seals. It then details assembling bearings and gears into housings using various tools. Precise measurements are taken to ensure proper bearing preload. Multiple planetary gear sets and carriers are assembled and installed. Washers, rings, and retaining rings are added. Bolts are tightened to specified torques to complete the assembly.
Caterpillar cat 365 b mh excavator (prefix cty) service repair manual (cty000...fjjskekmsemm
1) The document provides assembly instructions for a final drive on an excavator. It details cleaning parts, applying anti-seize compound, installing bearings and seals, and adjusting bearing preload using shims.
2) Carrier assemblies are assembled by installing bearings, thrust washers, and planetary gears, then securing with spring pins.
3) Carrier assemblies are installed in the ring gear and main housing, and components are secured with bolts torqued to specification.
Caterpillar cat 365 b l mh excavator (prefix cty) service repair manual (cty0...fjjskekmsemm
This document provides assembly instructions for a final drive in 29 steps. It lists required tools and parts. Key steps include: installing bearings and seals; determining bearing preload using shims; assembling carrier assemblies with planetary gears; and installing ring gears, covers, and bolts. Proper cleaning, lubrication and torque specifications are noted throughout assembly.
This document provides assembly instructions for a final drive in 29 steps. It lists required tools and parts. Key steps include: installing bearings and seals; determining bearing preload using shims; assembling carrier assemblies with planetary gears; and installing ring gears, covers, and bolts. Proper cleaning, lubrication and torque specifications are noted throughout assembly.
Caterpillar Cat 365B L MH EXCAVATOR (Prefix CTY) Service Repair Manual (CTY00...jdjkskmikdkmd
1) The document provides assembly instructions for a final drive on an excavator. It details cleaning parts, applying anti-seize compound, installing bearings and seals, and adjusting bearing preload using shims.
2) Carrier assemblies are assembled by installing bearings, thrust washers, and planetary gears, then securing with spring pins.
3) Carrier assemblies are installed in the ring gear and main housing, and components are secured with bolts torqued to specification.
This document provides assembly instructions for a final drive in 29 steps. It lists required tools and parts. Key steps include: installing bearings and seals; determining bearing preload using shims; assembling carrier assemblies with planetary gears; and installing ring gears, covers, and bolts. Proper cleaning, lubrication and torque specifications are noted throughout assembly.
Caterpillar Cat 365B L MH EXCAVATOR (Prefix CTY) Service Repair Manual (CTY00...paws21610697
This document provides assembly instructions for a final drive in 29 steps. It lists required tools and parts. Key steps include: installing bearings and seals; determining bearing preload using shims; assembling carrier assemblies with planetary gears; and installing ring gears, covers, and bolts. Proper cleaning, lubrication and torque specifications are noted throughout assembly.
Caterpillar cat 365 b mh excavator (prefix cty) service repair manual (cty000...fios9dkksd
1) The document provides assembly instructions for a final drive on an excavator. It details cleaning parts, applying anti-seize compound, installing bearings and seals, and adjusting bearing preload using shims.
2) Carrier assemblies are assembled by installing bearings, thrust washers, and planetary gears, then securing with spring pins.
3) Carrier assemblies are installed in the ring gear and main housing, and components are secured with bolts torqued to specification.
This document provides assembly instructions for a final drive in 29 steps. It lists required tools and parts. Key steps include: installing bearings and seals; determining bearing preload using shims; assembling carrier assemblies with planetary gears; and installing ring gears, covers, and bolts. Proper cleaning, lubrication and torque specifications are noted throughout assembly.
Caterpillar cat 318 f l excavator (prefix fft) service repair manual (fft0000...fjkskedmme
This document provides disassembly instructions for the final drive of a 318F L excavator. It describes 41 steps to fully disassemble the final drive components. Key steps include removing the sprocket, pistons, barrel assembly, springs, and various seals and plates. Safety warnings are provided to release pressures and contain fluids safely.
Caterpillar cat 385 c l excavator (prefix sbe) service repair manual (sbe0000...fjkskedmme
This document provides instructions for disassembling and assembling the final drive of a 385C L Excavator. It lists the required tools and gives step-by-step instructions to remove components such as the housing cover, carrier assemblies, planetary gear assemblies, ring gear, and motor housing. Precautions are given to ensure cleanliness during disassembly and assembly. The parts are to be reinstalled in their original locations and orientation marks should be made for alignment. Proper lifting devices and techniques are specified due to the heavy weights of some components.
Caterpillar cat 345 b series ii excavator (prefix ald) service repair manual ...fjsekdmmeed
This document provides instructions for removing and installing a lifter group on a 3176C engine. The removal process involves taking out bolts and separating the lifter assembly into sections to remove individual components like brackets, lifters and injector lifters. The installation is the reverse of removal, requiring cleaning of parts and reinstallation in the proper order and orientation. Precautions are provided to contain fluids and dispose of them according to regulations.
Caterpillar cat 345 d l excavator (prefix yee) service repair manual (yee0000...hhfjksekmm
This document provides instructions for removing and installing various components of the rear gear group and crankshaft rear seal of a 345D L Excavator with a C13 engine. The removal procedure includes using various tools to remove bolts, seals, gears, bushings, and bearings. The installation procedure provides instructions on cleaning, inspecting, applying threadlock, and installing components while ensuring proper dimensions and alignments are met. Torque specifications and notes are provided throughout.
Caterpillar cat 345 c l hydraulic excavator (prefix pjw) service repair manua...hhfjksekmm
The document provides assembly instructions for a 345C excavator final drive system in 3 steps:
1. Adjust the bearing preload of the final drive by measuring dimensions and determining the correct shim thickness.
2. Assemble the carrier assemblies, which include installing planetary gears, bearings, shafts, and pins into housings.
3. Install the assembled carrier assemblies into the sprocket and ring gears in the correct order.
Caterpillar cat d11 t track type tractor dozer bulldozer (prefix mdg) service...fjjsjeskkekem
This document provides assembly instructions for a final drive on a D11T track-type tractor. It lists 37 steps and required tools to assemble the final drive components which include installing bearings and seals using specialized tools, torquing bolts to specified values, and checking clearances with feeler gauges. Pictures accompany each step to illustrate the assembly process.
Caterpillar cat 345 b excavator (prefix ayr) service repair manual (ayr00001 ...fjsekdmmeed
This document provides instructions for disassembling and assembling the final drive of an excavator model 345B. It describes removing components such as the travel motor, final drive, ring gear, and carrier assemblies. Detailed steps are provided to disassemble each assembly into individual parts. The assembly section instructs cleaning and inspecting parts, applying anti-seize compound, and installing components in reverse order using lifting tools and following markings made during disassembly. Proper bearing preload is set by measuring clearance with shims.
Caterpillar cat 345 d l excavator (prefix kfh) service repair manual (kfh0000...hhfjksekmm
This document provides instructions for removing and installing various components of the rear gear group on a C13 engine, including:
1. The procedure for removing the rear gear group involves removing 10 components and using 2 required tools.
2. The installation procedure involves 11 steps and uses 1 required tool, and includes instructions for properly installing and positioning bearings.
3. Separate sections provide procedures for removing and installing the flywheel and crankshaft rear seal. Precautions are mentioned regarding handling heated parts and containing fluids.
Caterpillar cat 993 k wheel loader (prefix z9k) service repair manual (z9k000...ufjkskemfseol
This document provides instructions for disassembling the transmission planetary gears of a 993K wheel loader. It is a 26 step process that includes removing housing components, shafts, bearings, seals, springs, discs, and plates. Special tools are required, and parts should be cleaned before assembly. Detailed illustrations are provided for each step to ensure correct disassembly.
Caterpillar cat 323 f ln excavator (prefix yec) service repair manual (yec000...fjjskekdmme
This service repair manual provides instructions for assembling the final drive of a 323F LN Excavator. It outlines 37 steps requiring various tools to install bearings, seals, gears, pins, and other components in the proper order. Proper preloading of bearings is important. Gaskets and seals must be clean and lubricated before installation. Weights of individual components are provided to assist with assembly. Upon completion, the final drive is installed on the excavator.
Caterpillar cat 345 d l excavator (prefix jkn) service repair manual (jkn0000...hhfjksekmm
The document provides instructions for assembling a travel motor. It describes 33 steps to assemble parts like pistons, seals, plates, springs and valves. Measurements are checked with tools at several steps to ensure correct assembly. Cleaning parts and preventing contamination of hydraulic systems is emphasized.
Caterpillar cat 324 d l excavator (prefix pyt) service repair manual (pyt0000...jfksekmmdme
This document provides instructions for assembling the final drive of a 324D L excavator. It outlines 30 steps, including installing bearings and seals, determining the correct shim thickness, and joining the main housing to the motor housing. Cleanliness is emphasized throughout the assembly process to prevent contamination. Various tools are required, and components should be lubricated before assembly.
Caterpillar cat 365 b excavator (prefix 9tz) service repair manual (9tz00001 ...fios9dkksd
This document provides instructions for disassembling and assembling the final drive of a 365B L excavator. It describes in detail the 31 steps to disassemble the components of the final drive, including removing gears, shafts, carriers, and housing pieces. It then lists the 34 assembly steps, specifying the required tools and explaining how to install components like bearings, seals, gears, and housings back into the final drive. Precautions like cleaning parts and applying lubricants are noted.
Caterpillar cat 365 b mh excavator (prefix cty) service repair manual (cty000...fjjskekdmme
This document provides assembly instructions for a final drive in 29 steps. It begins by cleaning all parts and checking seals. It then details assembling bearings and gears into housings using various tools. Precise measurements are taken to ensure proper bearing preload. Multiple planetary gear sets and carriers are assembled and installed. Washers, rings, and retaining rings are added. Bolts are tightened to specified torques to complete the assembly.
Caterpillar cat 365 b mh excavator (prefix cty) service repair manual (cty000...fjjskekmsemm
1) The document provides assembly instructions for a final drive on an excavator. It details cleaning parts, applying anti-seize compound, installing bearings and seals, and adjusting bearing preload using shims.
2) Carrier assemblies are assembled by installing bearings, thrust washers, and planetary gears, then securing with spring pins.
3) Carrier assemblies are installed in the ring gear and main housing, and components are secured with bolts torqued to specification.
Caterpillar cat 365 b l mh excavator (prefix cty) service repair manual (cty0...fjjskekmsemm
This document provides assembly instructions for a final drive in 29 steps. It lists required tools and parts. Key steps include: installing bearings and seals; determining bearing preload using shims; assembling carrier assemblies with planetary gears; and installing ring gears, covers, and bolts. Proper cleaning, lubrication and torque specifications are noted throughout assembly.
This document provides assembly instructions for a final drive in 29 steps. It lists required tools and parts. Key steps include: installing bearings and seals; determining bearing preload using shims; assembling carrier assemblies with planetary gears; and installing ring gears, covers, and bolts. Proper cleaning, lubrication and torque specifications are noted throughout assembly.
Caterpillar Cat 365B L MH EXCAVATOR (Prefix CTY) Service Repair Manual (CTY00...jdjkskmikdkmd
1) The document provides assembly instructions for a final drive on an excavator. It details cleaning parts, applying anti-seize compound, installing bearings and seals, and adjusting bearing preload using shims.
2) Carrier assemblies are assembled by installing bearings, thrust washers, and planetary gears, then securing with spring pins.
3) Carrier assemblies are installed in the ring gear and main housing, and components are secured with bolts torqued to specification.
This document provides assembly instructions for a final drive in 29 steps. It lists required tools and parts. Key steps include: installing bearings and seals; determining bearing preload using shims; assembling carrier assemblies with planetary gears; and installing ring gears, covers, and bolts. Proper cleaning, lubrication and torque specifications are noted throughout assembly.
Caterpillar Cat 365B L MH EXCAVATOR (Prefix CTY) Service Repair Manual (CTY00...paws21610697
This document provides assembly instructions for a final drive in 29 steps. It lists required tools and parts. Key steps include: installing bearings and seals; determining bearing preload using shims; assembling carrier assemblies with planetary gears; and installing ring gears, covers, and bolts. Proper cleaning, lubrication and torque specifications are noted throughout assembly.
Caterpillar cat 365 b mh excavator (prefix cty) service repair manual (cty000...fios9dkksd
1) The document provides assembly instructions for a final drive on an excavator. It details cleaning parts, applying anti-seize compound, installing bearings and seals, and adjusting bearing preload using shims.
2) Carrier assemblies are assembled by installing bearings, thrust washers, and planetary gears, then securing with spring pins.
3) Carrier assemblies are installed in the ring gear and main housing, and components are secured with bolts torqued to specification.
This document provides assembly instructions for a final drive in 29 steps. It lists required tools and parts. Key steps include: installing bearings and seals; determining bearing preload using shims; assembling carrier assemblies with planetary gears; and installing ring gears, covers, and bolts. Proper cleaning, lubrication and torque specifications are noted throughout assembly.
Caterpillar Cat 365B L MH EXCAVATOR (Prefix CTY) Service Repair Manual Instan...jiuliu14811471
This document provides assembly instructions for a final drive in 29 steps. It lists required tools and parts. Key steps include installing bearings and seals, assembling carrier assemblies with planetary gears, and attaching the main housing, ring gear, and cover. Torque specifications and safety notes are included to ensure proper assembly.
This document provides assembly instructions for a final drive in 29 steps. It lists required tools and parts. Key steps include installing bearings and seals, assembling carrier assemblies with planetary gears, and attaching the main housing, ring gear, and cover. Torque specifications and safety notes are included to ensure proper assembly.
Caterpillar Cat 365B L MH EXCAVATOR (Prefix CTY) Service Repair Manual Instan...qianxu35543635
This document provides assembly instructions for a final drive in 29 steps. It lists required tools and parts. Key steps include: installing bearings and seals; determining bearing preload using shims; assembling carrier assemblies with planetary gears; and installing ring gears, covers, and bolts. Proper cleaning, lubrication and torque specifications are noted throughout assembly.
This document provides assembly instructions for a final drive in 29 steps. It lists required tools and parts. Key steps include: installing bearings and seals; determining bearing preload using shims; assembling carrier assemblies with planetary gears; and installing ring gears, covers, and bolts. Proper cleaning, lubrication and torque specifications are noted throughout assembly.
Caterpillar Cat 365B L MH EXCAVATOR (Prefix CTY) Service Repair Manual (CTY00...uddksemd8ud
This document provides assembly instructions for a final drive in 29 steps. It lists required tools and parts. Key steps include: installing bearings and seals; determining bearing preload using shims; assembling carrier assemblies with planetary gears; and installing ring gears, covers, and bolts. Proper cleaning, lubrication and torque specifications are noted throughout assembly.
Caterpillar Cat 365B L MH EXCAVATOR (Prefix CTY) Service Repair Manual (CTY00...f7djidksmd3e
This document provides assembly instructions for a final drive in 29 steps. It lists required tools and parts. Key steps include installing bearings and seals, assembling carrier assemblies with planetary gears, and attaching the main housing, ring gear, and cover. Torque specifications and alignment of components are emphasized throughout the process.
1) The document provides assembly instructions for a final drive on an excavator. It details cleaning parts, applying anti-seize compound, installing bearings and seals, and adjusting bearing preload using shims.
2) Carrier assemblies are assembled by installing bearings, thrust washers, and planetary gears, then securing with spring pins.
3) Carrier assemblies are installed in the ring gear and main housing, and components are secured with bolts torqued to specification.
This document provides assembly instructions for a final drive in 29 steps. It lists required tools and parts. Key steps include: installing bearings and seals; determining bearing preload using shims; assembling carrier assemblies with planetary gears; and installing ring gears, covers, and bolts. Proper cleaning, lubrication and torque specifications are noted throughout assembly.
Caterpillar Cat 365B L MH EXCAVATOR (Prefix CTY) Service Repair Manual (CTY00...f8usiedkdmm
This document provides assembly instructions for a final drive in 29 steps. It lists required tools and parts. Key steps include: installing bearings and seals; determining bearing preload using shims; assembling carrier assemblies with planetary gears; and installing ring gears, covers, and bolts. Proper cleaning, lubrication and torque specifications are noted throughout assembly.
Caterpillar cat 365 b l mh excavator (prefix cty) service repair manual (cty0...fios9dkksd
1) The document provides assembly instructions for a final drive on an excavator. It details cleaning parts, applying anti-seize compound, installing bearings and seals, and adjusting bearing preload using shims.
2) Carrier assemblies are assembled by installing bearings, thrust washers, and planetary gears, then securing with spring pins.
3) Carrier assemblies are installed in the ring gear and main housing, and components are secured with bolts torqued to specification.
Caterpillar cat 325 d excavator (prefix kbe) service repair manual (kbe00001 ...hfjsejdkemmn
The document provides assembly instructions for a final drive in 3 steps:
1. Clean and inspect parts, apply lubricants, and install bearings and seals.
2. Adjust bearing preload using shims between the bearing cone and coupling gear.
3. Assemble the planetary gears, carrier, and housing, applying torque to fasteners and stakes to pins.
Similar to Caterpillar cat 325 b l excavator (prefix 8rr) service repair manual (8rr00001 and up) (20)
This document provides an outline and general precautions for a shop manual. It discusses the copyright of the manual, preparation for disassembling equipment, safety procedures, hydraulic and electrical equipment handling, welding repairs, and international unit systems. The outline covers topics to be included in the manual such as specifications, maintenance, systems, disassembly, troubleshooting, engines, and optional attachment installation procedures.
Kobelco sk380 xdlc 10 hydraulic excavator service repair manualfjsjjekdkme
This document is a shop manual that provides guidelines and safety precautions for maintenance and repairs of hydraulic excavators. It contains sections on specifications, maintenance procedures, systems overview, disassembly/assembly instructions, troubleshooting, engines, and optional attachment installation. The manual is intended to instruct repair and service technicians on proper procedures. Copyright of the manual belongs to Kobelco Construction Machinery and permission is required for copying or distributing its contents.
Kobelco sk300 lc 10 hydraulic excavator service repair manualfjsjjekdkme
This document is a shop manual that provides specifications, maintenance, system, disassembly, troubleshooting, and engine information for a hydraulic excavator model. It contains sections on specifications, maintenance, systems, disassembly, troubleshooting, engine, and installation of options. Safety information is provided throughout, including general safety, safety precautions, and warnings.
Kobelco sk270 srlc 5 (na 2018 yu08) hydraulic excavator service repair manualfjsjjekdkme
This document is the shop manual for a hydraulic excavator. It contains outlines, precautions, and general information for repairing and maintaining the excavator. The manual is divided into chapters covering specifications, maintenance, systems, disassembly, troubleshooting, engines, and optional attachments. Precautions are provided for safety, preparing for disassembly, hydraulic and electrical equipment, and welding repairs. Copyright information is also included.
Kobelco sk260 lc 10 hydraulic excavator service repair manualfjsjjekdkme
This document outlines general precautions and guidelines for repairing excavator equipment according to the shop manual. It discusses preparing for disassembly, safety practices, hydraulic system repair, electrical work, and welding. Permission is required to copy or distribute content from the copyrighted manual. Measurements use the international unit system. Technicians should thoroughly read and understand the manual before performing any repair work.
Kobelco sk250 10 hydraulic excavator service repair manualfjsjjekdkme
This document outlines general precautions and guidelines for repairing excavator equipment according to the shop manual. It discusses preparing for disassembly, safety during disassembly and assembly, handling hydraulic and electrical equipment, welding repairs, and environmental issues. The outline notes that the copyright belongs to Kobelco and outlines rules for copying or distributing the manual's contents. It also introduces the international unit system used in specifications.
Kobelco sk60 8 hydraulic excavator service repair manualfjsjjekdkme
This document appears to be a shop manual that contains information for maintenance and repair of hydraulic excavators. It includes sections on specifications, maintenance, systems, disassembly, troubleshooting, engines, and optional attachment installation procedures. The document provides safety precautions for repairs and disassembly/assembly. It also includes a table for international unit conversion. The manual is intended as a technical reference for maintenance technicians to perform repairs and find fault equipment.
This shop manual provides information needed for the disassembly, reassembly, and repair of a Kawasaki 135ZV-2 wheel loader. It includes specifications, tightening torques, and service standards for the chassis, power, hydraulic, brake, and operator station systems. Safety precautions and symbols are defined. The manual instructs technicians on removing and installing major components like the engine, transmission, axles, cylinders, and more. Cautions are provided regarding parts handling and use of sealants or lock agents.
This shop manual provides information for performing maintenance and repairs on Kawasaki wheel loaders. It contains safety warnings and symbols, an outline of the loader components and maintenance schedule, recommended lubricants, and sections about inspecting and adjusting the chassis and power groups. Technical details are given for linkage pins, center pins, engine and transmission mounts, and the radiator mount. The purpose is to ensure good machine performance through following the correct maintenance and repair procedures.
Kawasaki 92 z7 wheel loader service repair manualfjsjjekdkme
This document provides specifications for the 90Z7 and 92Z7 wheel loaders. The 90Z7 is powered by a Hino E13C-VV diesel engine and has operating weights ranging from 24550-24870 kg. The 92Z7 also uses a Hino E13C-VV diesel engine and has operating weights from 26840-27090 kg. Both models have 4 speeds in forward and reverse and an articulation angle of 37 degrees left and right. Dimensional specifications like overall length, width, height and other measurements are provided for each model/bucket type.
Kawasaki 92 z7 wheel loader operation and maintenance manualfjsjjekdkme
The document provides safety instructions and component information for operating heavy machinery. It outlines proper procedures for starting and using the machine, transporting loads, and performing maintenance safely. Operators must follow guidelines to prevent injuries or accidents from improper or unsafe operation. The manual describes the various controls, switches, and components in the operator cab.
Kawasaki 90 z7 wheel loader service repair manualfjsjjekdkme
This document provides specifications for the 90Z7 and 92Z7 wheel loaders. The 90Z7 is powered by a Hino E13C-VV diesel engine and has operating weights ranging from 24550-24870 kg. The 92Z7 also uses a Hino E13C-VV diesel engine and has operating weights from 26840-27090 kg. Both models have 4 speeds in forward and reverse and an articulation angle of 37 degrees left and right. Dimensional specifications like overall length, width, height and other measurements are provided for each model/bucket type.
Kawasaki 90 z7 wheel loader operation and maintenance manualfjsjjekdkme
The document provides safety instructions and component descriptions for a machine. It outlines various hazards to avoid when operating or servicing the machine, such as ensuring safety before leaving the operator's seat, wearing protective clothing, and avoiding contact with moving parts. It also describes the machine's components, including the operator's station, consoles, switches, and monitoring systems. Maintenance procedures should follow safety practices like supporting the machine properly and avoiding high-pressure fluids.
Kawasaki 90 z6 wheel loader service repair manual (serial no. 90c7 9001 and up)fjsjjekdkme
This document provides guidelines and precautions for disassembling and reassembling a wheel loader. It discusses preparing the work area, inspecting components, draining fluids, cleaning parts, applying lubricants, and ensuring proper tightening of fasteners. Special attention should be given to sliding surfaces, seals, and markings for reassembly. Tools and loose parts should be accounted for after completion. Floating seals and nylon slings require special handling to prevent damage or improper installation.
Kawasaki 90 z6 wheel loader service repair manual (serial no. 90c7 0101 and up)fjsjjekdkme
This document provides specifications and component layout information for a 90Z6 wheel loader.
The specifications section lists operating weights, engine details, dimensions, speeds and other technical specifications for the GSC and LSC models.
The component layout sections include diagrams and lists showing the layout and weights of major components such as the chassis, powertrain, hydraulic, electrical and other systems. Component names, locations and approximate weights are provided.
Kawasaki 90 z6 wheel loader parts catalogue manual (serial no. 90c7 9001 and up)fjsjjekdkme
This document is a parts catalog for a wheel loader model 90Z6 powered by a Cummins QSM11 engine. It lists parts grouped by system including the front axle, rear axle, power train, engine systems, cab, chassis, electrical systems, hydraulic system, brake system and loader attachments. The document provides part numbers, part names, quantities and the applicable serial number range for each part listed.
Kawasaki 85 z7 wheel loader service repair manual (serial no. 85j1 5001 and up)fjsjjekdkme
This document provides specifications and layout diagrams for the components of a wheel loader. It includes:
- Specifications for dimensions, weights, engine details, speeds, and more.
- Overview diagrams showing the layout of main components such as the bucket, cylinders, lights, engine, and more.
- Detailed diagrams labeling locations of the engine, radiator, filters, tanks, valves, pumps, axles, and other parts.
- An overview of the electric system components around the cab, hydraulic oil tank, fuel tank, and engine.
- Sections providing specifications for the engine, hydraulic and electrical components.
The document contains detailed information on the specifications, component layout and electrical
Kawasaki 80 z7b wheel loader service repair manual (serial no. 80c8 5001 and up)fjsjjekdkme
The document contains sections from a shop manual for a wheel loader. It includes sections on general information, component layout, specifications, and maintenance procedures. The component layout sections describe and illustrate the main components of the wheel loader including the engine, hydraulic system, electrical system, cab, drive unit, and other key components. The specifications section lists technical specifications for the engine, operating weights, dimensions, travel speeds and other performance specifications.
Top-Quality AC Service for Mini Cooper Optimal Cooling PerformanceMotor Haus
Ensure your Mini Cooper stays cool and comfortable with our top-quality AC service. Our expert technicians provide comprehensive maintenance, repairs, and performance optimization, guaranteeing reliable cooling and peak efficiency. Trust us for quick, professional service that keeps your Mini Cooper's air conditioning system in top condition, ensuring a pleasant driving experience year-round.
car rentals in nassau bahamas | atv rental nassau bahamasjustinwilson0857
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
Automotive Engine Valve Manufacturing Plant Project Report.pptxSmith Anderson
The report provides a complete roadmap for setting up an Automotive Engine Valve. It covers a comprehensive market overview to micro-level information such as unit operations involved, raw material requirements, utility requirements, infrastructure requirements, machinery and technology requirements, manpower requirements, packaging requirements, transportation requirements, etc.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 325B L EXCAVATOR 8RR
Configuration: 325B & 325B L TRACK-TYPE EXCAVATORS 8RR00001-UP (MACHINE) POWERED BY 3116 ENGINE
Disassembly and Assembly
325B Excavator Machine Systems
Media Number -SENR8963-06 Publication Date -01/02/2017 Date Updated -21/02/2017
i02201834
Final Drive - Assemble
SMCS - 4050-016
Assembly procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 138-7573 Link Bracket 2
C 1P-1860 Retaining Ring Pliers 1
D 1U-5933 Seal Installer 1
E 138-7574 Link Bracket 2
F 5P-3931 Anti-Seize Compound 1
G 9S-3263 Thread Lock Compound 1
H 1U-8846 Gasket Sealant 1
Note: Make sure that all of the parts of the final drive are thoroughly clean and free of dirt
and debris prior to assembly.
1. Check the condition of all the O-ring seals that are used in the final drive. If any of the O-
ring seals are damaged, use new parts for replacement.
Note: If the final drive sprocket was removed from the main housing, refer to Disassembly
and Assembly, "Final Drive Sprocket - Remove and Install" in this manual. Follow the
installation procedure in order to install the final drive sprocket on the main housing.
2. Assemble the final drive on Tooling (A).
1/15
325B & 325B L TRACK-TYPE EXCAVATORS 8RR00001-UP (MACHINE) POWE...
2020/7/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g00511934
3. Apply Tooling (F) to the surfaces inside the main housing that contact bearings (38) and
(39). Install bearings (38) and (39) in the original locations in the main housing with a press.
Install bearings (38) and (39) until the bearings contact the counterbore in the main housing.
Illustration 2 g00511872
Illustration 3 g00511857
4. Use the following procedure to determine the correct bearing preload and the correct
thickness of shims (35) that are used under gear (34).
2/15
325B & 325B L TRACK-TYPE EXCAVATORS 8RR00001-UP (MACHINE) POWE...
2020/7/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 4 g00511882
a. Fasten Tooling (E) and a suitable lifting device to main housing (31), as shown.
Install main housing (31) on the motor housing.
b. Use a suitable press and a spacer to apply a load of 4000 kg (8820 lb) on bearing (38).
c. Rotate the main housing in order to seat the bearings.
d. Reduce the load on bearing (38) to 1000 ± 100 kg (2200 ± 220 lb).
Illustration 5 g00513387
e. Maintain the load on bearing (38). Measure the distance between the top face of the
motor housing and the bearing inner race. Use a depth micrometer to take this
measurement in several locations around the bearing. Compute the average of the
measured dimensions and record the number. Call this dimension (Y).
3/15
325B & 325B L TRACK-TYPE EXCAVATORS 8RR00001-UP (MACHINE) POWE...
2020/7/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 6 g00513390
f. Use a depth micrometer and measure the distance between the hub face and the gear
face of gear (34). Take measurements at several locations around the gear. Compute
the average of the measured dimensions and record the number. Call this dimension
(X).
g. Determine the correct thickness of the shim pack which is made up of shims (35). The
shim pack is used between the motor housing and gear (34). Use the following
equation to determine the shim pack thickness.
Shim pack thickness ... (X) − (Y) ± 0.05 mm (0.002 inch)
Note: If two shims are required, install the thinner shim next to gear (34) when the
gear is installed.
5. Remove the main housing from the motor housing.
Note: The rubber seals and all surfaces that contact the seals must be clean and dry. After
installation of the seals, apply clean SAE 30 oil on the contact surfaces of the metal seals.
For more information concerning the assembly and installation of Conventional Duo-Cone
Seals, refer to Disassembly and Assembly, "Duo-Cone Conventional Seals - Install" in this
manual.
Illustration 7 g00513401
6. Install Duo-Cone seal (37) in the main housing with Tooling (D).
4/15
325B & 325B L TRACK-TYPE EXCAVATORS 8RR00001-UP (MACHINE) POWE...
2020/7/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 8 g00513424
7. Use Tooling (D) in order to install Duo-Cone seal (36) in the motor.
Note: Be sure that the Duo-Cone seals are not scratched or damaged during the assembly of
the main housing or during the assembly of the motor housing. After installation of the main
housing on the motor housing, there will be a small gap between the components. The gap is
caused by the Duo-Cone seals. The gap will be eliminated during installation of gear (34).
Illustration 9 g00511882
8. Fasten Tooling (E) and a suitable lifting device to main housing (31). Position the main
housing and the final drive sprocket on the motor housing. Make sure that the Duo-Cone
seals are not scratched or damaged during installation.
5/15
325B & 325B L TRACK-TYPE EXCAVATORS 8RR00001-UP (MACHINE) POWE...
2020/7/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 10 g00511872
Illustration 11 g00511857
9. Apply Tooling (F) on the four pins in gear (34).
10. Place shim pack (35), which was determined in Step 4.a through 4.g, and gear (34) in the
correct position on the motor housing. If two shims were required, put the thinner shim in
contact with gear (34). Make sure that all of the holes in the components are in alignment
with each other.
11. Apply Tooling (G) on the threads of socket head bolts (33). Install the socket head bolts
(33) in order to hold gear (34) in place. Tighten bolts (33) evenly and tighten the bolts in
diagonally opposite pairs.
6/15
325B & 325B L TRACK-TYPE EXCAVATORS 8RR00001-UP (MACHINE) POWE...
2020/7/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 12 g00511825
12. Install O-ring seal (32) in main housing (31).
Illustration 13 g00511809
13. Thoroughly clean the mating surface of main housing (31) that contacts ring gear (30).
Apply a bead of Tooling (H) on the mating surface of ring gear (30). Fasten a suitable lifting
device to ring gear (30). Place ring gear (30) in position on the main housing. Make sure
that the alignment mark on the main housing and the alignment mark on the ring gear line
up with each other. It may be necessary to use a soft faced hammer to seat the ring gear on
the main housing.
Illustration 14 g00513561
7/15
325B & 325B L TRACK-TYPE EXCAVATORS 8RR00001-UP (MACHINE) POWE...
2020/7/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 15 g00572382
Illustration 16 g00511799
14. Use the following procedure to assemble carrier assembly (24).
a. Apply clean SAE 30 oil on bearings (29). Install bearings (29) in planetary gear (28).
b. Install thrust washer (27) on each side of planetary gear (28).
c. Install planetary gear (28) and thrust washers (27) in carrier (24).
Note: If planetary gear (28) has oil grooves "N", make sure that the planetary gear's
oil grooves are facing in the correct direction, which was noted during the
disassembly of carrier assembly (24).
d. Install planetary shaft (26) in carrier (24) and through planetary gear (28). Make sure
that the spring pin hole in the planetary shaft is in alignment with the spring pin hole
in the carrier.
8/15
325B & 325B L TRACK-TYPE EXCAVATORS 8RR00001-UP (MACHINE) POWE...
2020/7/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 17 g00513451
15. Install spring pin (25) in the carrier and into the planetary shaft. Install the spring pin until
the spring pin is even with the outside surface of the carrier. Orient the split in the spring pin
horizontally to the carrier. Align the split in the spring pin so that the split faces either side
of the carrier, as shown.
16. Make a stake mark on each side of the spring pin hole in the carrier. This will prevent the
spring pin from falling out of the spring pin hole. Each stake mark should be approximately
1.5 mm (0.06 inch) from the outside diameter of the spring pin hole.
17. Repeat Steps 14 through 16 in order to install the remaining planetary gears in carrier (24).
Illustration 18 g00511795
18. Install carrier assembly (24) in ring gear (30). Slide a piece of steel bar stock between the
planetary gears in carrier assembly (24), as shown. Make sure that the bar stock is centered
in the carrier assembly. Fasten a suitable lifting device to the steel bar stock, as shown.
Position carrier assembly (24) in ring gear (30). It may be necessary to move carrier
assembly (24) back and forth during installation in order to ensure that all gears align and all
gears mesh properly. Make sure that the carrier assembly is seated properly.
9/15
325B & 325B L TRACK-TYPE EXCAVATORS 8RR00001-UP (MACHINE) POWE...
2020/7/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. 19. Install spacer (16) in carrier assembly (24), as shown.
Illustration 19 g00511788
Illustration 20 g00572352
Illustration 21 g00511735
20. Use the following procedure to assemble carrier assembly (15).
a. Install sun gear (23) in carrier (15).
b. Use a screwdriver in order to install retaining ring (22) which secures sun gear (23) in
the carrier.
10/15
325B & 325B L TRACK-TYPE EXCAVATORS 8RR00001-UP (MACHINE) PO...
2020/7/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. c. Apply clean SAE 30 oil on bearing (21). Install bearing (21) in planetary gear (20).
d. Install thrust washer (19) on each side of planetary gear (20).
e. Install planetary gear (20) and thrust washers (19) in carrier (15).
Note: If planetary gear (20) has oil grooves "M", make sure that the planetary gear's
oil grooves are facing in the correct direction, which was noted during the
disassembly of carrier assembly (15).
f. Install planetary shaft (18) in carrier (15) and through planetary gear (20). Make sure
that the spring pin hole in the carrier is in alignment with the spring pin hole in the
planetary shaft.
Illustration 22 g00513451
21. Install spring pin (17) in the carrier and into the planetary shaft. Install the spring pin until
the spring pin is even with the outside surface of the carrier. Orient the split in the spring pin
horizontally to the carrier. Align the split in the spring pin so that the split faces either side
of the carrier, as shown.
22. Make a stake mark on each side of the spring pin hole in the carrier. This will prevent the
spring pin from falling out of the spring pin hole. Each stake mark should be approximately
1.5 mm (0.06 inch) from the outside diameter of the spring pin hole.
23. Repeat Steps 20 through 22 in order to install the remaining planetary gears in carrier (15).
24. Install carrier assembly (15) in carrier assembly (24). Move the carrier back and forth
during the installation in order to ensure that all gears engage properly. Make sure that the
carrier assembly is seated properly.
25. Install spacer (8) in the top side of carrier assembly (15).
11/15
325B & 325B L TRACK-TYPE EXCAVATORS 8RR00001-UP (MACHINE) PO...
2020/7/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 23 g00511653
Illustration 24 g00572334
Illustration 25 g00513639
Note: Make sure that retaining ring (9) is installed with the cross section of the ring in the
position that is shown. Refer to Illustration 25.
12/15
325B & 325B L TRACK-TYPE EXCAVATORS 8RR00001-UP (MACHINE) PO...
2020/7/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. 26. Use the following procedure to assemble carrier assembly (7).
a. Install sun gear (14) in carrier (7), as shown. Refer to Illustration 23.
b. Use a screwdriver in order to install retaining ring (13) which secures sun gear (14) in
the carrier.
c. Apply clean SAE 30 oil on bearing (12). Install bearing (12) in planetary gear (11).
d. Install thrust washer (10) on each side of planetary gear (11).
e. Install planetary gear (11) and thrust washers (10) on the shaft of carrier (7).
Note: If planetary gear (11) has oil grooves "L", make sure that the planetary gear's
oil grooves are facing in the same direction, which was noted during the disassembly
of carrier assembly (7).
f. Use Tooling (C) in order to install retaining ring (9) that secures the planetary gear in
position. Make sure that retaining ring (9) is installed correctly. Refer to Illustration
25.
27. Repeat Step 26 in order to install the remaining planetary gears on carrier assembly (7).
Illustration 26 g00511640
28. Install spacer (8) in carrier assembly (7).
Illustration 27 g00511636
13/15
325B & 325B L TRACK-TYPE EXCAVATORS 8RR00001-UP (MACHINE) PO...
2020/7/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. 29. Install carrier assembly (7) in carrier assembly (15). Make sure that the carrier assembly is
seated properly. Install sun gear (6) in carrier assembly (7).
Illustration 28 g00513653
30. Use a 25.4 mm (1.00 inch) thick straight edge and a depth micrometer in order to measure
dimension (P). Dimension (P) is between the upper surface of sun gear (6) and the machined
surface of ring gear (30). Record dimension (P).
Illustration 29 g00513657
31. Use a 25.4 mm (1.00 inch) thick straight edge and a depth micrometer in order to measure
dimension (Q). Dimension (Q) is from the machined surface of cover (2) to the bottom of
the insertion hole of thrust plate (5). Record dimension (Q).
Note: Thrust plate (5) is available in several thicknesses.
32. Determine the correct thickness of thrust plate (5). Use the following equation to determine
the thrust plate thickness.
Thrust plate thickness ... (Q) − (P) − 1.0 mm (0.04 inch) to 2.0 mm (0.08 inch)
33. Use a plastic hammer in order to install the correct thickness of thrust plate (5) in cover (2).
14/15
325B & 325B L TRACK-TYPE EXCAVATORS 8RR00001-UP (MACHINE) PO...
2020/7/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 30 g00511631
34. Put ring gear (4) in position in cover (2). Make sure that all of the mounting bolt holes in
both components are in alignment with each other. Apply Tooling (G) on the threads of
socket head bolts (3) that hold ring (4) in place. Install socket head bolts (3) and tighten
socket head bolts (3) evenly.
Illustration 31 g00511600
35. Make sure that the machined surface of ring gear (30) is thoroughly clean and dry and that
the machined surface is free of dirt and debris. Apply a bead of Tooling (H) around the
machined surface of the ring gear. Fasten Tooling (B) and a suitable lifting device to cover
(2). Place the cover in the original position on the ring gear. It will be necessary to rotate the
cover back and forth in order to engage the planetary gears of carrier assembly (7) with the
ring gear in cover (2).
36. Apply Tooling (G) on the threads of bolts (1) that hold cover (2) in position. Install the
washers and bolts (1). Tighten bolts (1) evenly to a torque of 530 ± 70 N·m (390 ± 50 lb ft).
End By:
a. Install the final drive. Refer to Disassembly and Assembly, "Final Drive - Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Jul 16 17:50:09 UTC+0800 2020
15/15
325B & 325B L TRACK-TYPE EXCAVATORS 8RR00001-UP (MACHINE) PO...
2020/7/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 325B L EXCAVATOR 8RR
Configuration: 325B & 325B L TRACK-TYPE EXCAVATORS 8RR00001-UP (MACHINE) POWERED BY 3116 ENGINE
Disassembly and Assembly
325B Excavator Machine Systems
Media Number -SENR8963-06 Publication Date -01/02/2017 Date Updated -21/02/2017
i00999230
Final Drive - Install
SMCS - 4050-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
(A) 138-7574 Link Bracket 2
1. Install the travel motor in the final drive. Refer to Disassembly and Assembly, "Travel
Motor - Install" in this manual.
2. Make sure that the mating surfaces of the final drive and the undercarriage frame assembly
are thoroughly clean and free of dirt and debris prior to assembly.
Illustration 1 g00486987
3. Fasten Tooling (A) and a hoist to final drive (7). Carefully, place the final drive in position
on the undercarriage frame assembly.
1/3
325B & 325B L TRACK-TYPE EXCAVATORS 8RR00001-UP (MACHINE) POWE...
2020/7/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 2 g00486988
4. Apply 9S-3263 Thread Lock Compound on the threads of 20 bolts (8). Install 20 bolts (8)
that secure the final drive to the undercarriage frame assembly. Tighten the bolts evenly.
5. Install two plugs (9) in the forcing bolt holes that are located in the undercarriage frame
assembly.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
Illustration 3 g00486981
2/3
325B & 325B L TRACK-TYPE EXCAVATORS 8RR00001-UP (MACHINE) POWE...
2020/7/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. 6. Install the O-ring seal on elbow (6). Install the elbow in the travel motor. Tighten the elbow
to a torque of 40 ± 5 N·m (30 ± 4 lb ft). Make sure that the elbow is oriented properly.
7. Remove the plugs from the ends of two hose assemblies (4) and (5). Check the condition of
the O-ring seals that are used in the ends of two hose assemblies (4) and (5). If the O-ring
seals are damaged, use new parts for replacement.
8. Connect two hose assemblies (4) and (5) to the travel motor.
9. Remove the plugs from the ends of two tube assemblies (3). Check the condition of the O-
ring seals that are used in the ends of two tube assemblies (3). If the O-ring seals are
damaged, use new parts for replacement.
10. Connect two tube assemblies (3) to the travel brake valve.
11. Check the oil level in the hydraulic oil tank. If necessary, fill the hydraulic oil tank with oil
to the correct level. Refer to Operation and Maintenance Manual, "Lubricant Viscosities"
for the proper oil viscosity and Operation and Maintenance Manual, "Hydraulic System Oil
Level - Check" for the correct filling procedure.
12. Start the engine, and check the final drive for oil leaks. Stop the engine.
Illustration 4 g00486980
13. Install cover assembly (2). Install the washers and four bolts (1) that secure cover assembly
(2) to the inside rear of the undercarriage frame assembly. Tighten four bolts (1) to a torque
of 130 ± 10 N·m (95 ± 7 lb ft).
End By:
a. Connect the track assembly. Refer to Disassembly and Assembly, "Track - Connect" in this
manual.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Jul 16 17:51:05 UTC+0800 2020
3/3
325B & 325B L TRACK-TYPE EXCAVATORS 8RR00001-UP (MACHINE) POWE...
2020/7/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 325B L EXCAVATOR 8RR
Configuration: 325B & 325B L TRACK-TYPE EXCAVATORS 8RR00001-UP (MACHINE) POWERED BY 3116 ENGINE
Disassembly and Assembly
325B Excavator Machine Systems
Media Number -SENR8963-06 Publication Date -01/02/2017 Date Updated -21/02/2017
i01001305
Swivel - Remove
SMCS - 5060-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
(A) 138-7573 Link Bracket 1
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Dealer Service
Tool Catalog" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
1/3
325B & 325B L TRACK-TYPE EXCAVATORS 8RR00001-UP (MACHINE) POWE...
2020/7/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. At operating temperature the implement hydraulic oil tank is hot and
under pressure. Hot oil can cause burns.
To prevent possible injury, release the pressure in the implement
hydraulic system before hydraulic lines or components are disconnected
or removed.
1. Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic
System Pressure - Release" in this manual.
2. Clean the outside of the swivel joint and the area around the swivel joint prior to removal.
Illustration 1 g00513210
3. Oil will drain from all hose assemblies that are connected to the swivel joint. Place suitable
containers under the machine in the area of the swivel joint in order to collect the oil.
4. Put identification marks on seven hose assemblies (1) for installation purposes. Disconnect
seven hose assemblies (1) from the swivel joint. Put plugs in the ends of the hose assemblies
in order to prevent oil loss and keep contaminants out of the hydraulic system.
5. Remove two bolts (2) and the washers that hold setting plate (3) in position. Remove setting
plate (3).
6. Remove eight bolts (4).
7. Remove one cover bolt from the swivel joint. Reuse the cover bolt in order to fasten Tool
(A) to the swivel joint. Fasten a hoist to Tool (A).
2/3
325B & 325B L TRACK-TYPE EXCAVATORS 8RR00001-UP (MACHINE) POWE...
2020/7/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 2 g00513213
This view is from the underside of the machine.
8. Remove bolts (5) and two cover assemblies (6) from the underside of the undercarriage
frame assembly.
Illustration 3 g00513219
This view is from the underside of the machine.
9. Put identification marks on eight hose assemblies (7) for installation purposes. Disconnect
eight hose assemblies (7) from the bottom of the swivel joint. Put plugs in the ends of the
hose assemblies in order to prevent oil loss and keep contaminants out of the hydraulic
system.
10. Remove tee fitting (8) from the swivel joint.
11. Cover the ports in the bottom of the swivel joint with tape in order to keep dirt and debris
out of the unit.
12. Remove six bolts (9).
13. Remove the swivel joint from the machine. The weight of the swivel joint is 43 kg (95 lb).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Jul 16 17:52:01 UTC+0800 2020
3/3
325B & 325B L TRACK-TYPE EXCAVATORS 8RR00001-UP (MACHINE) POWE...
2020/7/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 325B L EXCAVATOR 8RR
Configuration: 325B & 325B L TRACK-TYPE EXCAVATORS 8RR00001-UP (MACHINE) POWERED BY 3116 ENGINE
Disassembly and Assembly
325B Excavator Machine Systems
Media Number -SENR8963-06 Publication Date -01/02/2017 Date Updated -21/02/2017
i01793734
Swivel - Disassemble
SMCS - 5060-015
Disassembly Procedure
Start By:
a. Remove the swivel joint. Refer to Disassembly and Assembly, "Swivel - Remove".
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Dealer Service
Tool Catalog" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
1. Thoroughly clean the outside of the swivel joint prior to disassembly.
1/2
325B & 325B L TRACK-TYPE EXCAVATORS 8RR00001-UP (MACHINE) POWE...
2020/7/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
25. Illustration 1 g00879932
2. Remove bolts (1) and cover (2) from outside housing (8). Remove O-ring seal (4) from
outside housing (8).
3. Remove bolts (5) and retainer (7) from rotor (9). Remove outside housing (8) from rotor (9).
4. Turn the outside housing upside-down and remove O-ring seals (6) and seals (3) from the
outside housing.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Jul 16 17:52:57 UTC+0800 2020
2/2
325B & 325B L TRACK-TYPE EXCAVATORS 8RR00001-UP (MACHINE) POWE...
2020/7/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 325B L EXCAVATOR 8RR
Configuration: 325B & 325B L TRACK-TYPE EXCAVATORS 8RR00001-UP (MACHINE) POWERED BY 3116 ENGINE
Disassembly and Assembly
325B Excavator Machine Systems
Media Number -SENR8963-06 Publication Date -01/02/2017 Date Updated -21/02/2017
i01793749
Swivel - Assemble
SMCS - 5060-016
Assembly Procedure
1. Make sure that all of the parts of the swivel joint are thoroughly clean and free of dirt and
debris.
Illustration 1 g00879932
2. Check the condition of seals (3) and O-ring seals (6). If the seals or O-ring seals are worn or
damaged, use new parts for replacement.
1/3
325B & 325B L TRACK-TYPE EXCAVATORS 8RR00001-UP (MACHINE) POWE...
2020/7/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Illustration 2 g00917800
The number of seals may vary.
3. Install seals (3) and O-ring seals (6) in outside housing (8). Put clean hydraulic oil on seals
(3) and O-ring seals (6).
4. Install outside housing (8) over rotor (9). Install retainer (7) and bolts (5) that secure the
retainer.
5. Check the condition of O-ring seal (4). If the O-ring seal is damaged, use a new part for
replacement.
6. Apply clean hydraulic oil on O-ring seal (4). Install the O-ring seal in the outside housing.
7. Install cover (2) and bolts (1) that secure the cover.
2/3
325B & 325B L TRACK-TYPE EXCAVATORS 8RR00001-UP (MACHINE) POWE...
2020/7/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...