This document provides instructions for disassembling a pilot valve used in 322C and 322C L excavators powered by a 3126 engine. The summary is:
1. The pilot valve must first be removed from the machine by disconnecting hoses, wires, switches, and removing mounting bolts.
2. To disassemble the pilot valve, over 30 individual parts must be removed including fittings, seals, covers, springs, bushings, and spools.
3. Cleanliness is important during disassembly to prevent contamination, and identification marks should be made on parts.
Caterpillar cat 322 c excavator (prefix fed) service repair manual (fed00001 ...ujdfjkkskmem
This document provides instructions for disassembling a pilot valve used in 322C and 322C L excavators powered by a 3126 engine. The summary is:
1. The pilot valve must first be removed from the machine by disconnecting hoses, wires, switches, and removing mounting bolts.
2. To disassemble the pilot valve, over 30 individual parts must be removed including fittings, seals, covers, springs, bushings, and spools.
3. Cleanliness is important during disassembly to prevent contamination, and identification marks should be made on parts.
Caterpillar cat 416 d backhoe loader (prefix bkg) service repair manual (bkg0...ujjfjkskekmme
This document provides instructions for removing and disassembling a pilot valve (loader) from a 416D backhoe loader. It describes 12 steps to remove the pilot valve, which include disconnecting hydraulic lines, wiring harnesses, and removing mounting nuts and bolts. It then details 29 steps to disassemble the pilot valve, separating components like the valve body, plungers, springs, and fittings. Finally, it lists 5 steps for reassembling the pilot valve during installation.
Caterpillar cat 323 d l excavator (prefix jlg) service repair manual (jlg0000...fjjsekmsmmes
1) The document provides instructions for removing and installing inlet and exhaust valve seat inserts from the cylinder head of a C6.4 engine. It describes using various tools to notch, extract, and install the valve seat inserts.
2) Procedures are given for disassembling, cleaning, inspecting, and reassembling an engine oil cooler. Components like gaskets, bolts, and the oil cooler core and cover are removed and installed.
3) Steps are outlined for removing, replacing the gasket, and reinstalling an engine oil relief valve on the C6.4 engine. Cleanliness is emphasized throughout.
Caterpillar cat 323 d l excavator (prefix bym) service repair manual (bym0000...fjskksmem
1. The document provides instructions for removing and installing inlet and exhaust valve seat inserts from the cylinder head of a C6.4 engine. It describes using various tools to notch, extract, and install the valve seat inserts.
2. Additional instructions cover removing, disassembling, and assembling the engine oil cooler. Steps include disconnecting hoses and fasteners, and removing individual components like the cooler core and covers.
3. Precautions are given to keep all parts clean and free of contaminants, which can cause damage and premature wear.
Caterpillar cat 325 d l excavator (prefix erk) service repair manual (erk0000...hfjsekekmmd
This document provides instructions for removing and installing a unit injector sleeve and unit injector hydraulic pump on a Caterpillar 325D L excavator powered by a C7 engine. The removal process for the unit injector sleeve involves using various tools to cut threads in the sleeve and pull it out. The installation involves cleaning parts, applying sealant, and tapping the sleeve into place. The unit injector hydraulic pump removal involves disconnecting hoses and bolts, while installation connects hoses and bolts and applies grease to seals.
Caterpillar cat 312 b excavator (prefix 8jr) service repair manual (8jr00001 ...fjsekksmemm
The documents provide instructions for servicing components of the engine in a 312B L excavator. It describes how to disassemble, inspect, and reassemble the water pump. The instructions include removing the water pump from the engine, disassembling it into individual parts like the impeller and shaft, inspecting parts for wear, replacing the seal if needed, and reassembling the water pump using the appropriate tools and specifications. Proper cleanup and installation procedures are emphasized to prevent contamination.
The document provides instructions for installing a control manifold on a 322C excavator. It describes:
1) Connecting various harnesses, hoses, and assemblies to the control manifold.
2) Installing high efficiency filters to replace standard filters for 250 hours.
3) Closing an access door to complete the installation.
Caterpillar Cat 322C L 322CL Excavator (Prefix FED) Service Repair Manual (FE...fusjekkdmdmd2w
The document provides instructions for disassembling the pilot valve of a 322C excavator. It describes 27 steps to fully disassemble the pilot valve, removing components like fittings, seals, covers, springs, spools and plugs. Cleanliness is important during disassembly and identification marks should be made on components. Personal protective equipment is recommended when releasing spring forces during disassembly.
Caterpillar cat 322 c excavator (prefix fed) service repair manual (fed00001 ...ujdfjkkskmem
This document provides instructions for disassembling a pilot valve used in 322C and 322C L excavators powered by a 3126 engine. The summary is:
1. The pilot valve must first be removed from the machine by disconnecting hoses, wires, switches, and removing mounting bolts.
2. To disassemble the pilot valve, over 30 individual parts must be removed including fittings, seals, covers, springs, bushings, and spools.
3. Cleanliness is important during disassembly to prevent contamination, and identification marks should be made on parts.
Caterpillar cat 416 d backhoe loader (prefix bkg) service repair manual (bkg0...ujjfjkskekmme
This document provides instructions for removing and disassembling a pilot valve (loader) from a 416D backhoe loader. It describes 12 steps to remove the pilot valve, which include disconnecting hydraulic lines, wiring harnesses, and removing mounting nuts and bolts. It then details 29 steps to disassemble the pilot valve, separating components like the valve body, plungers, springs, and fittings. Finally, it lists 5 steps for reassembling the pilot valve during installation.
Caterpillar cat 323 d l excavator (prefix jlg) service repair manual (jlg0000...fjjsekmsmmes
1) The document provides instructions for removing and installing inlet and exhaust valve seat inserts from the cylinder head of a C6.4 engine. It describes using various tools to notch, extract, and install the valve seat inserts.
2) Procedures are given for disassembling, cleaning, inspecting, and reassembling an engine oil cooler. Components like gaskets, bolts, and the oil cooler core and cover are removed and installed.
3) Steps are outlined for removing, replacing the gasket, and reinstalling an engine oil relief valve on the C6.4 engine. Cleanliness is emphasized throughout.
Caterpillar cat 323 d l excavator (prefix bym) service repair manual (bym0000...fjskksmem
1. The document provides instructions for removing and installing inlet and exhaust valve seat inserts from the cylinder head of a C6.4 engine. It describes using various tools to notch, extract, and install the valve seat inserts.
2. Additional instructions cover removing, disassembling, and assembling the engine oil cooler. Steps include disconnecting hoses and fasteners, and removing individual components like the cooler core and covers.
3. Precautions are given to keep all parts clean and free of contaminants, which can cause damage and premature wear.
Caterpillar cat 325 d l excavator (prefix erk) service repair manual (erk0000...hfjsekekmmd
This document provides instructions for removing and installing a unit injector sleeve and unit injector hydraulic pump on a Caterpillar 325D L excavator powered by a C7 engine. The removal process for the unit injector sleeve involves using various tools to cut threads in the sleeve and pull it out. The installation involves cleaning parts, applying sealant, and tapping the sleeve into place. The unit injector hydraulic pump removal involves disconnecting hoses and bolts, while installation connects hoses and bolts and applies grease to seals.
Caterpillar cat 312 b excavator (prefix 8jr) service repair manual (8jr00001 ...fjsekksmemm
The documents provide instructions for servicing components of the engine in a 312B L excavator. It describes how to disassemble, inspect, and reassemble the water pump. The instructions include removing the water pump from the engine, disassembling it into individual parts like the impeller and shaft, inspecting parts for wear, replacing the seal if needed, and reassembling the water pump using the appropriate tools and specifications. Proper cleanup and installation procedures are emphasized to prevent contamination.
The document provides instructions for installing a control manifold on a 322C excavator. It describes:
1) Connecting various harnesses, hoses, and assemblies to the control manifold.
2) Installing high efficiency filters to replace standard filters for 250 hours.
3) Closing an access door to complete the installation.
Caterpillar Cat 322C L 322CL Excavator (Prefix FED) Service Repair Manual (FE...fusjekkdmdmd2w
The document provides instructions for disassembling the pilot valve of a 322C excavator. It describes 27 steps to fully disassemble the pilot valve, removing components like fittings, seals, covers, springs, spools and plugs. Cleanliness is important during disassembly and identification marks should be made on components. Personal protective equipment is recommended when releasing spring forces during disassembly.
The document provides instructions for installing a control manifold on a 322C excavator. It describes:
1) Connecting various harnesses, hoses, and assemblies to the control manifold.
2) Installing high efficiency filters to replace existing pilot, case drain, and return filters.
3) Closing an access door once installation is complete.
Caterpillar Cat 322C L 322CL Excavator (Prefix FED) Service Repair Manual (FE...ufjskmdmdmed
The document provides instructions for disassembling the pilot valve of a 322C excavator. It describes 27 steps to fully disassemble the pilot valve, removing components like fittings, seals, covers, springs, spools and plugs. Cleanliness is important during disassembly and identification marks should be made on components. Personal protective equipment is recommended when releasing spring forces during disassembly.
Caterpillar Cat 322C L 322CL Excavator (Prefix FED) Service Repair Manual (FE...jfkksemmdmd
The document provides instructions for installing a control manifold on a 322C excavator. It describes:
1) Connecting various harnesses, hoses, and assemblies to the control manifold.
2) Installing high efficiency filters to replace existing pilot, case drain, and return filters.
3) Closing an access door once installation is complete.
The document provides instructions for installing a control manifold on a 322C excavator. It describes:
1) Connecting various harnesses, hoses, and assemblies to the control manifold.
2) Installing high efficiency filters to replace existing pilot, case drain, and return filters.
3) Closing an access door once installation is complete.
The document provides instructions for disassembling the pilot valve of a 322C excavator. It describes 27 steps to fully disassemble the pilot valve, removing components like fittings, seals, covers, springs, spools and plugs. Cleanliness is important during disassembly and identification marks should be made on components. Personal protective equipment is recommended when releasing spring forces during disassembly.
The document provides instructions for disassembling the pilot valve of a 322C excavator. It describes 27 steps to disassemble the various components of the pilot valve, including removing fittings, covers, springs, seals, spools and plugs. Cleanliness is important during disassembly to prevent dirt from entering the internal mechanism. Identification marks should be placed on components for reassembly. The process involves removing bolts, nuts, plugs and other fasteners to separate the individual parts of the pilot valve.
Caterpillar Cat 322C L Excavator (Prefix FED) Service Repair Manual Instant D...udjkskdmmd
The document provides instructions for disassembling the pilot valve of a 322C excavator. It describes 27 steps to fully disassemble the pilot valve, removing components like fittings, seals, covers, springs, spools and plugs. Cleanliness is important during disassembly and identification marks should be made on components. Personal protective equipment is recommended when releasing spring forces during disassembly.
The document provides instructions for installing a control manifold on a 322C excavator. It describes:
1) Connecting various harnesses, hoses, and assemblies to the control manifold.
2) Installing high efficiency filters to replace standard filters for 250 hours.
3) Closing an access door to complete the installation.
Caterpillar Cat 322C L 322CL Excavator (Prefix FED) Service Repair Manual (FE...fujskekdjdmd
The document provides instructions for disassembling the pilot valve of a 322C excavator. It describes 27 steps to fully disassemble the pilot valve, removing components like fittings, seals, covers, springs, spools and plugs. Cleanliness is important during disassembly and identification marks should be made on components. Personal protective equipment is recommended when releasing spring forces during disassembly.
The document provides instructions for disassembling the pilot valve of a 322C excavator. It describes 27 steps to fully disassemble the pilot valve, removing components like fittings, seals, covers, springs, spools and plugs. Cleanliness is important during disassembly and identification marks should be made on components. Personal protective equipment is recommended when releasing spring forces during disassembly.
Caterpillar Cat 322C L 322CL Excavator (Prefix FED) Service Repair Manual (FE...gvxq62414225
The document provides instructions for disassembling the pilot valve of a 322C excavator. It describes 27 steps to fully disassemble the pilot valve, removing components like fittings, seals, covers, springs, spools and plugs. Cleanliness is important during disassembly and identification marks should be made on components. Personal protective equipment is recommended when releasing spring forces during disassembly.
Caterpillar Cat 322C and 322C L 322CL Excavator (Prefix FED) Service Repair M...yan77xunhao
The document provides instructions for disassembling the pilot valve of a 322C excavator. It describes 27 steps to disassemble the various components of the pilot valve, including removing fittings, covers, springs, seals, spools and plugs. Cleanliness is important during disassembly and identification marks should be made on components. Personal protective equipment is recommended when releasing spring forces during disassembly.
The document provides instructions for installing a control manifold on a 322C excavator. It describes:
1) Connecting various harnesses, hoses, and assemblies to the control manifold.
2) Installing high efficiency filters to replace existing pilot, case drain, and return filters.
3) Closing an access door once installation is complete.
Caterpillar Cat 322C L 322CL Excavator (Prefix FED) Service Repair Manual (FE...fujsked9dikdkd
The document provides instructions for disassembling the pilot valve of a 322C excavator. It describes 27 steps to fully disassemble the pilot valve, removing components like fittings, seals, covers, springs, spools and plugs. Cleanliness is important during disassembly and identification marks should be made on components. Personal protective equipment is recommended when releasing spring forces during disassembly.
The document provides instructions for installing a control manifold on a 322C excavator. It describes:
1) Connecting various harnesses, hoses, and assemblies to the control manifold.
2) Installing high efficiency filters to replace standard filters for 250 hours.
3) Closing an access door to complete the installation.
Caterpillar Cat 322C L 322CL Excavator (Prefix FED) Service Repair Manual (FE...fujeikdmdmd5
The document provides instructions for installing a control manifold on a 322C excavator. It describes:
1) Connecting various harnesses, hoses, and assemblies to the control manifold.
2) Installing high efficiency filters to replace standard filters for 250 hours.
3) Closing an access door to complete the installation.
This document provides instructions for disassembling a pilot valve used in 322C and 322C L excavators. The summary is as follows:
1. The pilot valve is first removed from the machine according to separate instructions. It is then disassembled by removing fittings, seals, pedals, covers, springs, balls, bushings, and spools.
2. Specific components removed include O-rings, caps, packings, springs, spring seats, and retaining rings.
3. The spool assemblies are further disassembled by removing seats, springs, washers, and spools. Identification marks are placed on components and cleanliness is important during disassembly.
This document provides instructions for disassembling a pilot valve used in 322C and 322C L excavators. The summary is as follows:
1. The pilot valve is first removed from the machine according to separate instructions. It is then disassembled by removing fittings, seals, pedals, covers, springs, balls, bushings, and spools.
2. Specific components removed include O-rings, caps, packings, springs, spring seats, and retaining rings.
3. The spool assemblies are further disassembled by removing seats, springs, washers, and spools. Identification marks are placed on components and cleanliness is important during disassembly.
This document provides instructions for disassembling a pilot valve used in 322C and 322C L excavators. The summary is as follows:
1. The pilot valve is first removed from the machine according to separate instructions. It is then disassembled by removing fittings, seals, pedals, covers, springs, balls, bushings, and spools.
2. Specific components removed include O-rings, caps, packings, springs, spring seats, and retaining rings.
3. The spool assemblies are further disassembled by removing seats, springs, washers, and spools. Identification marks are placed on components and cleanliness is important during disassembly.
The document provides instructions for disassembling and assembling the travel motor of a 320C excavator. It lists 28 steps for disassembling the travel motor into individual components. This includes removing bolts, seals, plates, springs, pistons, and other parts. Cleanliness is emphasized to prevent contamination. The document then lists the assembly procedure, which reverses the disassembly steps. Proper identification of parts and cleanliness are important for correct reassembly.
New holland l225 tier 4 skid steer loader service repair manual [ndm461085 ]ujfjjkskkemmd
This service manual provides instructions for servicing the engine and other components of 200 Series Skid Steer Loaders and Compact Track Loaders, including removing the engine by draining fluids, disconnecting electrical connections and hoses, removing covers and fans, and then fully removing the engine from the machine. Specific models and applicable component sections are listed at the beginning. Safety warnings are provided throughout regarding personal safety and handling fluids and heavy components.
New holland cx5090 hillside combine harvesters service repair manualujfjjkskkemmd
This document is a service manual for CNH Industrial combine harvesters and provides technical information on the machines' systems and components. It contains over 55 chapters organized into sections covering the engine, transmission, axles, hydraulics, brakes, electrical systems, attachments, feeding, threshing, separation, cleaning, and unloading systems. Each chapter provides technical data, functional descriptions, diagnostics, and service procedures for the machines' mechanical, electrical and hydraulic components.
More Related Content
Similar to Caterpillar cat 322 c l 322cl excavator (prefix fed) service repair manual (fed00001 and up)
The document provides instructions for installing a control manifold on a 322C excavator. It describes:
1) Connecting various harnesses, hoses, and assemblies to the control manifold.
2) Installing high efficiency filters to replace existing pilot, case drain, and return filters.
3) Closing an access door once installation is complete.
Caterpillar Cat 322C L 322CL Excavator (Prefix FED) Service Repair Manual (FE...ufjskmdmdmed
The document provides instructions for disassembling the pilot valve of a 322C excavator. It describes 27 steps to fully disassemble the pilot valve, removing components like fittings, seals, covers, springs, spools and plugs. Cleanliness is important during disassembly and identification marks should be made on components. Personal protective equipment is recommended when releasing spring forces during disassembly.
Caterpillar Cat 322C L 322CL Excavator (Prefix FED) Service Repair Manual (FE...jfkksemmdmd
The document provides instructions for installing a control manifold on a 322C excavator. It describes:
1) Connecting various harnesses, hoses, and assemblies to the control manifold.
2) Installing high efficiency filters to replace existing pilot, case drain, and return filters.
3) Closing an access door once installation is complete.
The document provides instructions for installing a control manifold on a 322C excavator. It describes:
1) Connecting various harnesses, hoses, and assemblies to the control manifold.
2) Installing high efficiency filters to replace existing pilot, case drain, and return filters.
3) Closing an access door once installation is complete.
The document provides instructions for disassembling the pilot valve of a 322C excavator. It describes 27 steps to fully disassemble the pilot valve, removing components like fittings, seals, covers, springs, spools and plugs. Cleanliness is important during disassembly and identification marks should be made on components. Personal protective equipment is recommended when releasing spring forces during disassembly.
The document provides instructions for disassembling the pilot valve of a 322C excavator. It describes 27 steps to disassemble the various components of the pilot valve, including removing fittings, covers, springs, seals, spools and plugs. Cleanliness is important during disassembly to prevent dirt from entering the internal mechanism. Identification marks should be placed on components for reassembly. The process involves removing bolts, nuts, plugs and other fasteners to separate the individual parts of the pilot valve.
Caterpillar Cat 322C L Excavator (Prefix FED) Service Repair Manual Instant D...udjkskdmmd
The document provides instructions for disassembling the pilot valve of a 322C excavator. It describes 27 steps to fully disassemble the pilot valve, removing components like fittings, seals, covers, springs, spools and plugs. Cleanliness is important during disassembly and identification marks should be made on components. Personal protective equipment is recommended when releasing spring forces during disassembly.
The document provides instructions for installing a control manifold on a 322C excavator. It describes:
1) Connecting various harnesses, hoses, and assemblies to the control manifold.
2) Installing high efficiency filters to replace standard filters for 250 hours.
3) Closing an access door to complete the installation.
Caterpillar Cat 322C L 322CL Excavator (Prefix FED) Service Repair Manual (FE...fujskekdjdmd
The document provides instructions for disassembling the pilot valve of a 322C excavator. It describes 27 steps to fully disassemble the pilot valve, removing components like fittings, seals, covers, springs, spools and plugs. Cleanliness is important during disassembly and identification marks should be made on components. Personal protective equipment is recommended when releasing spring forces during disassembly.
The document provides instructions for disassembling the pilot valve of a 322C excavator. It describes 27 steps to fully disassemble the pilot valve, removing components like fittings, seals, covers, springs, spools and plugs. Cleanliness is important during disassembly and identification marks should be made on components. Personal protective equipment is recommended when releasing spring forces during disassembly.
Caterpillar Cat 322C L 322CL Excavator (Prefix FED) Service Repair Manual (FE...gvxq62414225
The document provides instructions for disassembling the pilot valve of a 322C excavator. It describes 27 steps to fully disassemble the pilot valve, removing components like fittings, seals, covers, springs, spools and plugs. Cleanliness is important during disassembly and identification marks should be made on components. Personal protective equipment is recommended when releasing spring forces during disassembly.
Caterpillar Cat 322C and 322C L 322CL Excavator (Prefix FED) Service Repair M...yan77xunhao
The document provides instructions for disassembling the pilot valve of a 322C excavator. It describes 27 steps to disassemble the various components of the pilot valve, including removing fittings, covers, springs, seals, spools and plugs. Cleanliness is important during disassembly and identification marks should be made on components. Personal protective equipment is recommended when releasing spring forces during disassembly.
The document provides instructions for installing a control manifold on a 322C excavator. It describes:
1) Connecting various harnesses, hoses, and assemblies to the control manifold.
2) Installing high efficiency filters to replace existing pilot, case drain, and return filters.
3) Closing an access door once installation is complete.
Caterpillar Cat 322C L 322CL Excavator (Prefix FED) Service Repair Manual (FE...fujsked9dikdkd
The document provides instructions for disassembling the pilot valve of a 322C excavator. It describes 27 steps to fully disassemble the pilot valve, removing components like fittings, seals, covers, springs, spools and plugs. Cleanliness is important during disassembly and identification marks should be made on components. Personal protective equipment is recommended when releasing spring forces during disassembly.
The document provides instructions for installing a control manifold on a 322C excavator. It describes:
1) Connecting various harnesses, hoses, and assemblies to the control manifold.
2) Installing high efficiency filters to replace standard filters for 250 hours.
3) Closing an access door to complete the installation.
Caterpillar Cat 322C L 322CL Excavator (Prefix FED) Service Repair Manual (FE...fujeikdmdmd5
The document provides instructions for installing a control manifold on a 322C excavator. It describes:
1) Connecting various harnesses, hoses, and assemblies to the control manifold.
2) Installing high efficiency filters to replace standard filters for 250 hours.
3) Closing an access door to complete the installation.
This document provides instructions for disassembling a pilot valve used in 322C and 322C L excavators. The summary is as follows:
1. The pilot valve is first removed from the machine according to separate instructions. It is then disassembled by removing fittings, seals, pedals, covers, springs, balls, bushings, and spools.
2. Specific components removed include O-rings, caps, packings, springs, spring seats, and retaining rings.
3. The spool assemblies are further disassembled by removing seats, springs, washers, and spools. Identification marks are placed on components and cleanliness is important during disassembly.
This document provides instructions for disassembling a pilot valve used in 322C and 322C L excavators. The summary is as follows:
1. The pilot valve is first removed from the machine according to separate instructions. It is then disassembled by removing fittings, seals, pedals, covers, springs, balls, bushings, and spools.
2. Specific components removed include O-rings, caps, packings, springs, spring seats, and retaining rings.
3. The spool assemblies are further disassembled by removing seats, springs, washers, and spools. Identification marks are placed on components and cleanliness is important during disassembly.
This document provides instructions for disassembling a pilot valve used in 322C and 322C L excavators. The summary is as follows:
1. The pilot valve is first removed from the machine according to separate instructions. It is then disassembled by removing fittings, seals, pedals, covers, springs, balls, bushings, and spools.
2. Specific components removed include O-rings, caps, packings, springs, spring seats, and retaining rings.
3. The spool assemblies are further disassembled by removing seats, springs, washers, and spools. Identification marks are placed on components and cleanliness is important during disassembly.
The document provides instructions for disassembling and assembling the travel motor of a 320C excavator. It lists 28 steps for disassembling the travel motor into individual components. This includes removing bolts, seals, plates, springs, pistons, and other parts. Cleanliness is emphasized to prevent contamination. The document then lists the assembly procedure, which reverses the disassembly steps. Proper identification of parts and cleanliness are important for correct reassembly.
Similar to Caterpillar cat 322 c l 322cl excavator (prefix fed) service repair manual (fed00001 and up) (20)
New holland l225 tier 4 skid steer loader service repair manual [ndm461085 ]ujfjjkskkemmd
This service manual provides instructions for servicing the engine and other components of 200 Series Skid Steer Loaders and Compact Track Loaders, including removing the engine by draining fluids, disconnecting electrical connections and hoses, removing covers and fans, and then fully removing the engine from the machine. Specific models and applicable component sections are listed at the beginning. Safety warnings are provided throughout regarding personal safety and handling fluids and heavy components.
New holland cx5090 hillside combine harvesters service repair manualujfjjkskkemmd
This document is a service manual for CNH Industrial combine harvesters and provides technical information on the machines' systems and components. It contains over 55 chapters organized into sections covering the engine, transmission, axles, hydraulics, brakes, electrical systems, attachments, feeding, threshing, separation, cleaning, and unloading systems. Each chapter provides technical data, functional descriptions, diagnostics, and service procedures for the machines' mechanical, electrical and hydraulic components.
New holland cx840 combine harvesters service repair manualujfjjkskkemmd
The document provides an overview and component locations of the primary hydraulic power system for a New Holland agricultural vehicle. The system uses a closed-center load sensing pump to supply oil to circuits for steering, header height control, straw elevator functions, lateral flotation, reel adjustment, and unloading tube control. Key components include hydraulic pumps and motors, valves, cylinders, filters, accumulators, and manifolds.
New holland cx6.90 laterale fpt cursor 9 tier 4 b (final) combine harvester s...ujfjjkskkemmd
This service manual provides technical information for maintenance and repair of several combine models including the CX5.80, CX5.90, CX6.80, and CX6.90. The manual contains sections covering the engine, transmission, axles, hydraulic and electrical systems, attachments/headers, and other major components. Technical data, functional descriptions, diagnostics, and service procedures are provided for each system.
New holland c232 tier 4 compact track loader service repair manual [ndm451672...ujfjjkskkemmd
This service manual provides instructions for servicing engines and components for New Holland 200 Series Skid Steer Loaders and Compact Track Loaders including removing the engine by draining fluids, disconnecting electrical components and hoses, removing covers and cooling components, and then lifting out the engine. Specific models and replacement part numbers are listed for each component. Safety warnings are provided throughout regarding personal safety and relieving hydraulic pressure before working on the machine.
New holland br6080 round balers service repair manualujfjjkskkemmd
This service manual provides instructions for repairing and maintaining a baler. It includes sections covering the baler's hydraulic, electrical, electronic and pneumatic systems, power systems, transmission, axles, brakes, wheels, and crop processing functions. Safety information is also included, emphasizing the importance of following proper safety procedures when servicing equipment.
New holland b100 c stage iv tractor loader backhoe service repair manualujfjjkskkemmd
This document is a service manual for various tractor loader backhoe models including the B100C, B110C, and B115C. It contains over 200 sections covering all systems of the machines from the engine and transmission to hydraulics, electrical systems, and safety information. The manual provides repair and maintenance instructions for qualified service personnel and is intended to ensure safe and proper operation of the equipment.
New holland b95 tc backhoe loader service repair manualujfjjkskkemmd
The document provides instructions for inspecting and disassembling/assembling torque converters for backhoe loaders. It describes inspecting the converter hub splines and welds for wear or damage, and replacing the converter or drive plate if issues are found. The disassembly process involves removing the drive plate screws and plates and then the converter. Reassembly requires installing the converter on the input shaft, then the drive plates with screws tightened to a specified torque.
Caterpillar cat 951 c track loader (prefix 69h) service repair manual (69h018...ujfjjkskkemmd
This document provides instructions for servicing a 951B track loader. It discusses general instructions for disassembly and assembly including safety, cleanliness, removal and installation of parts, cleaning and handling of parts, and more. It also provides details on specific service tools, pressing parts, bolts and torque, bearing types, seals, and other components. The goal is to ensure proper procedures are followed for repairing and reassembling the machine.
Caterpillar cat 951 b track loader (prefix 86j) service repair manual (86j000...ujfjjkskkemmd
This document provides instructions for disassembling and assembling starting motors for a 951B track loader. It describes the parts and tools needed and steps to:
1. Disassemble a 42-MT starting motor by removing housing bolts, brushes, field windings, and pinion drive.
2. Inspect and clean all parts.
3. Assemble the starting motor by reversing the disassembly steps, applying grease or thread lock as needed.
Caterpillar cat 931 b track loader (prefix 30y) service repair manual (30y000...ujfjjkskkemmd
This service repair manual provides instructions for removing and installing various components of a Caterpillar 931B track loader, including:
1) Track roller frames, which are removed by taking off guards, yokes, and bolts, and lifted with straps and a hoist.
2) Pivot shafts, by removing seals, bearings, and support assemblies after draining oil and using straps and hoists.
3) Equalizer bars, which are removed by taking off guards and pins after jacking up the machine.
Caterpillar cat 931 b track loader (prefix 26y) service repair manual (26y000...ujfjjkskkemmd
This document provides instructions for removing and installing steering clutches on a 931B track loader. It begins by listing the necessary preparatory steps of removing the hydraulic tank, fuel tank, battery, brake linkage, and disconnecting hoses and wiring. It then details removing each individual component of the steering clutch assembly, including the cylinder, plates, springs, housing, and linkages. The instructions conclude by describing how to reinstall each part in reverse order and providing final checks and replacements of the tanks.
Caterpillar cat 931 b track loader (prefix 4sc) service repair manual (4sc000...ujfjjkskkemmd
This document provides instructions for removing and installing track carrier rollers, track roller guards, and track rollers on a Caterpillar 931B track loader. It describes loosening the track, removing covers and guards, and then removing rollers by taking off bolts and locks. Reinstallation involves cleaning surfaces, applying lubricant, pressing in bearings, and installing seals before reattaching components using bolts. Precautions are given regarding hydraulic pressure in the track and ensuring paint is removed from contact surfaces.
Caterpillar cat 432 d backhoe loader (prefix bld) service repair manual (bld0...ujfjjkskkemmd
This document provides instructions for disassembling the transmission of a 432D Backhoe Loader. It lists the required tools and begins by having the transmission removed per the specified procedure. The transmission is then disassembled into its major components which are further disassembled. Steps include removing the front and rear drive shafts, piston pump, draining the oil, and separating the case from the transmission using bolts and lifting devices. The front output shaft and various internal components like bearings, gears, and seals are then removed from the transmission.
Caterpillar cat 432 d backhoe loader (prefix bld) service repair manual (bld0...ujfjjkskkemmd
This document provides instructions for removing and installing exhaust manifolds and air inlet manifolds on Caterpillar 3054 engines. It includes detailed removal and installation procedures with illustrations. The procedures describe removing components like nuts, bolts, manifolds, and gaskets, and installing new gaskets, manifolds, and related components. Special notices are provided regarding keeping parts clean and containing fluids.
Caterpillar cat 430 e backhoe loader (prefix swc) service repair manual (swc0...ujfjjkskkemmd
This document provides instructions for disassembling and assembling the transmission of a 430E backhoe loader. It lists required tools and outlines 43 steps to disassemble parts like the transmission case, direct drive shaft, and input shaft. It also outlines 13 steps to assemble parts back into the transmission case like installing O-rings, seals, bearings, and valves. The summary aims to concisely convey the high-level goal of providing transmission disassembly and assembly instructions in under 3 sentences.
Caterpillar cat 428 e backhoe loader (prefix snl) service repair manual (snl0...ujfjjkskkemmd
The document provides instructions for removing a hydraulic tank from a 428E backhoe loader. It involves draining the hydraulic oil, removing various panels and covers, disconnecting hoses and harness assemblies, and removing bolts to detach the tank. Twenty-six steps are outlined detailing how to remove the floor plates, side panels, ducting, and other components to access and detach the hydraulic tank.
Caterpillar cat 428 e backhoe loader (prefix dxc) service repair manual (dxc0...ujfjjkskkemmd
This document provides instructions for removing and installing a bucket on a 428E backhoe loader. It describes:
1. Releasing hydraulic pressure before removal.
2. Disconnecting hoses from the lower link assemblies.
3. Removing retaining rings, washers and pins from the lower links.
4. Attaching a lifting device and removing the retaining ring, washers and pin from the other side.
5. Removing the bucket.
Caterpillar cat 428 e backhoe loader (prefix dph) service repair manual (dph0...ujfjjkskkemmd
This document provides instructions for removing and installing an engine water pump on a 428E backhoe loader. The removal procedure involves draining coolant, removing hoses and bolts, and removing the water pump. The installation procedure specifies cleaning parts, installing a new joint, aligning the water pump using guide bolts, and reinstalling bolts. Proper cleanup and alignment of parts is emphasized to prevent contamination and ensure correct assembly.
Caterpillar cat 428 d backhoe loader (prefix mbm) service repair manual (mbm0...ujfjjkskkemmd
1. The document provides step-by-step instructions for assembling the transmission of a 428D Backhoe Loader. It details assembling the various transmission components including gears, shafts, bearings, seals and other parts.
2. The transmission assembly procedure requires various tools and begins with installing bearing cups in the transmission case. It then provides directions for assembling the input shaft, reverse shaft, output shafts and other internal components.
3. The final assembly section instructs installing the transmission case and checking clearances of internal shafts before installing remaining external components and filling the transmission with oil.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 322C EXCAVATOR FED
Configuration: 322C & 322C L Excavators FED00001-UP (MACHINE) POWERED BY 3126 Engine
Disassembly and Assembly
322C Excavator Machine Systems
Media Number -RENR3843-07 Publication Date -01/02/2017 Date Updated -20/02/2017
i02349029
Control Manifold (Pilot Oil) - Install - NFC Control Valve
SMCS - 5059-012-M9
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2674 Vacuum Cap 1
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
1/4322C & 322C L Excavators FED00001-UP (MACHINE) POWERED BY 3126 Engin...
2019/9/19https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g00691105
1. Install control manifold (10), the washers and bolts (11).
Illustration 2 g01175140
2. Connect harness assemblies (9).
Illustration 3 g00691101
3. Connect harness assembly (8) and hose assemblies (7).
2/4322C & 322C L Excavators FED00001-UP (MACHINE) POWERED BY 3126 Engin...
2019/9/19https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 4 g00691097
4. Remove the plugs and the caps.
5. Connect hose assemblies (6) and harness assemblies (5).
Illustration 5 g01175139
6. Connect hose assemblies (2).
Illustration 6 g00691104
7. Install access cover (4), the washers and bolts (3).
8. Remove Tooling (A) and install the cap to the hydraulic tank.
3/4322C & 322C L Excavators FED00001-UP (MACHINE) POWERED BY 3126 Engin...
2019/9/19https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. 9. Install high efficiency filters in place of the pilot filter, the case drain filter, and the return
filter.
Note: High efficiency filters should not be run for more than 250 hours before you change
back to the standard filters.
Illustration 7 g00690963
10. Remove Tooling (A).
11. Check the hydraulic system level.
Illustration 8 g01175136
12. Close access door (1) on the right side of the machine.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Sep 19 11:55:35 UTC+0800 2019
4/4322C & 322C L Excavators FED00001-UP (MACHINE) POWERED BY 3126 Engin...
2019/9/19https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 322C EXCAVATOR FED
Configuration: 322C & 322C L Excavators FED00001-UP (MACHINE) POWERED BY 3126 Engine
Disassembly and Assembly
322C Excavator Machine Systems
Media Number -RENR3843-07 Publication Date -01/02/2017 Date Updated -20/02/2017
i01968161
Pilot Valve (Travel) - Remove
SMCS - 3220-011
Removal Procedure
Start By:
a. Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic
System Pressure - Release".
Note: Before you begin the following procedure swing the upper structure in order to gain access
to the cover that is located under the cab.
Note: A hydraulic oil sample should be obtained before any maintenance is performed in order to
establish the system contaminant level. Refer to Fluid Analysis Laboratory Guide, SEBF3116,
"Obtaining an Oil Sample for S·O·S Analysis". Refer to Operation and Maintenance Manual,
"Sampling Interval and Location of Sampling Valve" for the correct location.
Illustration 1 g00704086
1. Loosen bolts (3).
1/6322C & 322C L Excavators FED00001-UP (MACHINE) POWERED BY 3126 Engin...
2019/9/19https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. 2. Remove bolts (1) in order to remove cover (2).
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
At operating temperature, the hydraulic oil is hot and under pressure.
Hot oils can cause burns.
To prevent possible personal injury, release the pressure in the work
tool hydraulic circuit (boom, stick, bucket, and swing), travel circuits,
and the hydraulic oil tank at the filler cap before any hydraulic lines or
components are disconnected or removed.
Remove the filler cap only when the engine is stopped and the filler cap
is cool enough to touch.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for
installation purposes. Plug all lines, hoses and tubes. This helps to prevent fluid loss and this
helps to keep contaminants from entering the system.
2/6322C & 322C L Excavators FED00001-UP (MACHINE) POWERED BY 3126 Engin...
2019/9/19https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 2 g00704095
3. Disconnect hose assemblies (4) from the pilot valve.
Illustration 3 g00704100
4. Disconnect hose assemblies (5) from the pilot valve.
Illustration 4 g00704108
5. Disconnect harness assembly (6). Remove the harness assembly from the clip.
6. Remove left travel pressure switch (7).
3/6322C & 322C L Excavators FED00001-UP (MACHINE) POWERED BY 3126 Engin...
2019/9/19https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 5 g00704110
7. Disconnect harness assembly (8). Remove the harness assembly from the clip.
8. Remove right travel pressure switch (9).
Illustration 6 g00704117
Note: Mark the location of hydraulic connector (11) that has a filter for installation
purposes.
9. Remove hydraulic connector (11) from the pilot valve.
10. Remove hydraulic connector (10) from the pilot valve.
11. Remove the O-ring seals from the connectors.
Illustration 7 g00704119
12. Remove rubber floormat (12) from the travel pedals.
4/6322C & 322C L Excavators FED00001-UP (MACHINE) POWERED BY 3126 Engin...
2019/9/19https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 8 g00704120
13. Remove rubber pedal (13).
14. Remove rubber pedal (14).
Illustration 9 g00704123
15. Remove bolts (17) in order to remove left travel pedal (15).
16. Remove bolts (18) in order to remove right travel pedal (16).
Illustration 10 g00704128
17. Remove bellows (19) from the pilot valve.
5/6322C & 322C L Excavators FED00001-UP (MACHINE) POWERED BY 3126 Engin...
2019/9/19https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 11 g00704131
18. Remove bolts (20).
19. Remove pilot valves (21).
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Sep 19 11:56:35 UTC+0800 2019
6/6322C & 322C L Excavators FED00001-UP (MACHINE) POWERED BY 3126 Engin...
2019/9/19https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 322C EXCAVATOR FED
Configuration: 322C & 322C L Excavators FED00001-UP (MACHINE) POWERED BY 3126 Engine
Disassembly and Assembly
322C Excavator Machine Systems
Media Number -RENR3843-07 Publication Date -01/02/2017 Date Updated -20/02/2017
i02375113
Pilot Valve (Travel) - Disassemble
SMCS - 3220-015
Disassembly Procedure
Start By:
a. Remove the pilot valve. Refer to Disassembly and Assembly, "Pilot Valve (Travel) - Remove".
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the
component should be thoroughly cleaned. This will prevent dirt from entering the internal
mechanism.
Note: During the disassembly of the pilot valve, put identification marks on each component for
assembly purposes.
1/11322C & 322C L Excavators FED00001-UP (MACHINE) POWERED BY 3126 Engin...
2019/9/19https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 1 g00704366
Illustration 2 g01021619
1. Remove fittings (37) from the pilot valve.
2/11322C & 322C L Excavators FED00001-UP (MACHINE) POWERED BY 3126 Engin...
2019/9/19https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 3 g00711962
2. Remove O-ring seals (38) and (39) from fittings (37).
Illustration 4 g00711974
3. Remove setscrew (6) and camshaft (19) from the pedal.
Illustration 5 g00711976
4. Remove pedal (12) from the pilot valve.
3/11322C & 322C L Excavators FED00001-UP (MACHINE) POWERED BY 3126 Engin...
2019/9/19https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 6 g01021620
5. Remove nuts (17) and setscrews (5).
6. Repeat Steps 3 through 5 for the remaining pedal.
Illustration 7 g01021621
7. Remove bolts (4) and covers (24).
Illustration 8 g01021622
8. Remove bushings (20) from covers (24).
4/11322C & 322C L Excavators FED00001-UP (MACHINE) POWERED BY 3126 Engin...
2019/9/19https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 9 g01021623
9. Remove bolts (26) and cover (25).
Illustration 10 g00712108
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
10. Remove plug (8) and the pushrod from the body assembly.
5/11322C & 322C L Excavators FED00001-UP (MACHINE) POWERED BY 3126 Engin...
2019/9/19https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 11 g00712111
11. Remove piston (18) from pushrod (16).
12. Remove pushrod (16) from plug (8).
Illustration 12 g00712118
13. Remove O-ring seal (11) and cap (2) from plug (8).
Illustration 13 g00712119
14. Remove packing (3) from plug (8).
6/11322C & 322C L Excavators FED00001-UP (MACHINE) POWERED BY 3126 Engin...
2019/9/19https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 14 g00712122
15. Remove outer spring (23) and inner spring (22).
Illustration 15 g00712126
16. Remove spring seat (27).
Illustration 16 g01021624
17. Remove balls (33).
7/11322C & 322C L Excavators FED00001-UP (MACHINE) POWERED BY 3126 Engin...
2019/9/19https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 17 g00712130
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
18. Apply pressure to bushing (34).
19. Remove retaining ring (32).
20. Slowly release the pressure on bushing (34).
Illustration 18 g00712136
21. Remove bushing (34).
8/11322C & 322C L Excavators FED00001-UP (MACHINE) POWERED BY 3126 Engin...
2019/9/19https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 19 g00712139
22. Remove spool assembly (15).
23. Use the following procedure to disassemble spool assembly (15).
Illustration 20 g00712141
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
a. Apply pressure to seat (1) by hand. Put the end of spool (14) in the slotted opening of
seat (1). Remove seat (1).
b. Remove spring (7) from spool (14).
c. Remove washers (9), (10), and (13) from spool (14).
9/11322C & 322C L Excavators FED00001-UP (MACHINE) POWERED BY 3126 Engin...
2019/9/19https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 21 g00712165
24. Remove spring (21).
25. Repeat Steps 10 through 24 in order to remove the other three spool assemblies.
Illustration 22 g01021626
26. Remove plugs (31) from body assembly (35).
Illustration 23 g00712173
27. Remove O-ring seals (30) from plugs (31).
10/11322C & 322C L Excavators FED00001-UP (MACHINE) POWERED BY 3126 Eng...
2019/9/19https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 24 g00712178
28. Remove seat (29), ball (28), and plugs (36) from body assembly (35).
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Sep 19 11:57:36 UTC+0800 2019
11/11322C & 322C L Excavators FED00001-UP (MACHINE) POWERED BY 3126 Eng...
2019/9/19https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
24. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 322C EXCAVATOR FED
Configuration: 322C & 322C L Excavators FED00001-UP (MACHINE) POWERED BY 3126 Engine
Disassembly and Assembly
322C Excavator Machine Systems
Media Number -RENR3843-07 Publication Date -01/02/2017 Date Updated -20/02/2017
i02375115
Pilot Valve (Travel) - Assemble
SMCS - 3220-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-6396 O-Ring Assembly Compound
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in
cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint
may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn
or damaged, use new parts for replacement. All disassembly and all assembly procedures must be
performed on a clean work surface and in a clean hydraulic area. Keep cleaned parts covered and
protected at all times.
Note: O-rings, gaskets, and seals should always be replaced. A used O-ring may not have the same
sealing properties as a new O-ring. Apply a thin coating of Tooling (A) during the assembly
procedure.
1/12322C & 322C L Excavators FED00001-UP (MACHINE) POWERED BY 3126 Engin...
2019/9/19https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Illustration 1 g00704366
Illustration 2 g00712178
1. Install plugs (36) in body assembly (35). Tighten plugs (36) to a torque of 6.9 ± 1.0 N·m
(61.07 ± 8.9 lb in).
2. Install ball (28) and seat (29) in body assembly (35).
2/12322C & 322C L Excavators FED00001-UP (MACHINE) POWERED BY 3126 Engin...
2019/9/19https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Illustration 3 g00712173
3. Install new O-ring seals (30) on plugs (31).
Illustration 4 g01021626
4. Install plugs (31) in body assembly (35). Tighten plugs (31) to a torque of 27 ± 3 N·m
(20 ± 2 lb ft).
Illustration 5 g00712165
5. Install spring (21).
6. Use the following procedure to assemble spool assembly (15).
3/12322C & 322C L Excavators FED00001-UP (MACHINE) POWERED BY 3126 Engin...
2019/9/19https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Illustration 6 g00712141
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
a. Install washers (13), (10), and (9) on spool (14).
b. Install spring (7) on spool (14).
c. Put the end of spool (14) in the slotted opening of seat (1). Install seat (1).
Illustration 7 g00712139
7. Install spool assembly (15).
4/12322C & 322C L Excavators FED00001-UP (MACHINE) POWERED BY 3126 Engin...
2019/9/19https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...