This document provides instructions for removing and installing the crankshaft pulley on a Caterpillar C6.4 engine. The removal procedure involves using a puller tool to remove the pulley from the crankshaft. For installation, the pulley is pressed back onto the crankshaft using a press and ensuring it is properly aligned. Safety precautions are provided to keep parts clean and prevent damage. Tools required are listed.
Caterpillar Cat 320D RR and 320D LRR Excavator (Prefix GMX) Service Repair Ma...yu5676962
This document provides instructions for removing and installing various engine components on a Caterpillar 320D RR excavator, including:
- Removing and installing the flywheel using various tools
- Removing and installing the crankshaft rear seal
- Removing and installing the flywheel housing
- Removing and installing the crankshaft pulley
The document gives detailed step-by-step instructions and illustrations for each procedure, and lists the required tools. Safety notices are provided to keep parts clean and contain fluids.
Caterpillar Cat 320D RR and 320D LRR Excavator (Prefix GMX) Service Repair Ma...ze6074xunong
This document provides instructions for removing and installing various engine components on a Caterpillar 320D RR excavator, including:
- Removing and installing the flywheel using various tools
- Removing and installing the crankshaft rear seal
- Removing and installing the flywheel housing
- Removing and installing the crankshaft pulley
The document gives detailed step-by-step instructions and illustrations for each procedure, and lists the required tools. Safety notices are provided to keep parts clean and contain fluids.
Caterpillar Cat 320D RR and 320D LRR Excavator (Prefix GMX) Service Repair Ma...f8seodkdmdmed3
The document provides instructions for removing and installing a flywheel housing on a 320D RR excavator. It describes removing the electric starting motor, flywheel, bolts and washers securing the housing. It also includes removing the gasket and oil seal from the housing. For installation, it specifies cleaning and applying retaining compound before installing a new oil seal and reattaching the housing with bolts and washers.
Caterpillar Cat 320D RR and 320D LRR Excavator (Prefix GMX) Service Repair Ma...gongfuao7509
This document provides instructions for removing and installing various engine components on a Caterpillar 320D RR excavator, including:
- Removing and installing the flywheel using various tools
- Removing and installing the crankshaft rear seal
- Removing and installing the flywheel housing
- Removing and installing the crankshaft pulley
The document gives detailed step-by-step instructions and illustrations for each procedure, and lists the required tools. Safety notices are provided to keep parts clean and contain fluids.
Caterpillar Cat 320D RR and 320D LRR Excavator (Prefix GMX) Service Repair Ma...f8usejkdmmd8i
This document provides instructions for removing and installing various engine components on a Caterpillar 320D RR excavator, including:
- Removing and installing the flywheel using various tools
- Removing and installing the crankshaft rear seal
- Removing and installing the flywheel housing
- Removing and installing the crankshaft pulley
The document gives detailed step-by-step instructions and illustrations for each procedure, and lists the required tools. Safety notices are provided to keep parts clean and contain fluids.
Caterpillar cat 320 d lrr excavator (prefix gmx) service repair manual (gmx00...9fiseookddk
The document provides instructions for removing and installing a flywheel housing on a 320D RR excavator. It describes removing the electric starting motor, flywheel, bolts and washers securing the housing. It also includes removing the gasket and oil seal from the housing. For installation, it specifies cleaning and applying retaining compound before installing a new oil seal and reattaching the housing with bolts and washers.
Caterpillar Cat 320D RR and 320D LRR Excavator (Prefix GMX) Service Repair Ma...8foskkdjdkdm3e
The document provides instructions for removing and installing a flywheel housing on a 320D RR excavator. It describes removing the electric starting motor, flywheel, bolts and washers securing the housing. It also includes removing the gasket and oil seal from the housing. For installation, it specifies cleaning and applying retaining compound before installing a new oil seal and reattaching the housing with bolts and washers.
This document provides instructions for removing and installing various engine components on a Caterpillar 320D RR excavator, including:
- Removing and installing the flywheel using various tools
- Removing and installing the crankshaft rear seal
- Removing and installing the flywheel housing
- Removing and installing the crankshaft pulley
The document contains detailed step-by-step instructions, illustrations, and safety notices for working on and servicing parts of the Caterpillar C6.4 engine.
Caterpillar Cat 320D RR and 320D LRR Excavator (Prefix GMX) Service Repair Ma...yu5676962
This document provides instructions for removing and installing various engine components on a Caterpillar 320D RR excavator, including:
- Removing and installing the flywheel using various tools
- Removing and installing the crankshaft rear seal
- Removing and installing the flywheel housing
- Removing and installing the crankshaft pulley
The document gives detailed step-by-step instructions and illustrations for each procedure, and lists the required tools. Safety notices are provided to keep parts clean and contain fluids.
Caterpillar Cat 320D RR and 320D LRR Excavator (Prefix GMX) Service Repair Ma...ze6074xunong
This document provides instructions for removing and installing various engine components on a Caterpillar 320D RR excavator, including:
- Removing and installing the flywheel using various tools
- Removing and installing the crankshaft rear seal
- Removing and installing the flywheel housing
- Removing and installing the crankshaft pulley
The document gives detailed step-by-step instructions and illustrations for each procedure, and lists the required tools. Safety notices are provided to keep parts clean and contain fluids.
Caterpillar Cat 320D RR and 320D LRR Excavator (Prefix GMX) Service Repair Ma...f8seodkdmdmed3
The document provides instructions for removing and installing a flywheel housing on a 320D RR excavator. It describes removing the electric starting motor, flywheel, bolts and washers securing the housing. It also includes removing the gasket and oil seal from the housing. For installation, it specifies cleaning and applying retaining compound before installing a new oil seal and reattaching the housing with bolts and washers.
Caterpillar Cat 320D RR and 320D LRR Excavator (Prefix GMX) Service Repair Ma...gongfuao7509
This document provides instructions for removing and installing various engine components on a Caterpillar 320D RR excavator, including:
- Removing and installing the flywheel using various tools
- Removing and installing the crankshaft rear seal
- Removing and installing the flywheel housing
- Removing and installing the crankshaft pulley
The document gives detailed step-by-step instructions and illustrations for each procedure, and lists the required tools. Safety notices are provided to keep parts clean and contain fluids.
Caterpillar Cat 320D RR and 320D LRR Excavator (Prefix GMX) Service Repair Ma...f8usejkdmmd8i
This document provides instructions for removing and installing various engine components on a Caterpillar 320D RR excavator, including:
- Removing and installing the flywheel using various tools
- Removing and installing the crankshaft rear seal
- Removing and installing the flywheel housing
- Removing and installing the crankshaft pulley
The document gives detailed step-by-step instructions and illustrations for each procedure, and lists the required tools. Safety notices are provided to keep parts clean and contain fluids.
Caterpillar cat 320 d lrr excavator (prefix gmx) service repair manual (gmx00...9fiseookddk
The document provides instructions for removing and installing a flywheel housing on a 320D RR excavator. It describes removing the electric starting motor, flywheel, bolts and washers securing the housing. It also includes removing the gasket and oil seal from the housing. For installation, it specifies cleaning and applying retaining compound before installing a new oil seal and reattaching the housing with bolts and washers.
Caterpillar Cat 320D RR and 320D LRR Excavator (Prefix GMX) Service Repair Ma...8foskkdjdkdm3e
The document provides instructions for removing and installing a flywheel housing on a 320D RR excavator. It describes removing the electric starting motor, flywheel, bolts and washers securing the housing. It also includes removing the gasket and oil seal from the housing. For installation, it specifies cleaning and applying retaining compound before installing a new oil seal and reattaching the housing with bolts and washers.
This document provides instructions for removing and installing various engine components on a Caterpillar 320D RR excavator, including:
- Removing and installing the flywheel using various tools
- Removing and installing the crankshaft rear seal
- Removing and installing the flywheel housing
- Removing and installing the crankshaft pulley
The document contains detailed step-by-step instructions, illustrations, and safety notices for working on and servicing parts of the Caterpillar C6.4 engine.
This document provides instructions for removing and installing various engine components on a Caterpillar 320D RR excavator, including:
- Removing and installing the flywheel using various tools
- Removing and installing the crankshaft rear seal
- Removing and installing the flywheel housing
- Removing and installing the crankshaft pulley
The document gives detailed step-by-step instructions and illustrations for each procedure, and lists the required tools. Safety notices are provided to keep parts clean and contain fluids.
This document provides instructions for removing and installing various engine components on a Caterpillar 320D RR excavator, including:
- Removing and installing the flywheel using various tools
- Removing and installing the crankshaft rear seal
- Removing and installing the flywheel housing
- Removing and installing the crankshaft pulley
The document contains detailed step-by-step instructions, illustrations, and safety notices for working on and servicing parts of the Caterpillar C6.4 engine.
This document provides instructions for removing and installing various engine components on a Caterpillar 320D RR excavator, including:
- Removing and installing the flywheel using various tools
- Removing and installing the crankshaft rear seal
- Removing and installing the flywheel housing
- Removing and installing the crankshaft pulley
The document gives detailed step-by-step instructions and illustrations for each procedure, and lists any required tools. Safety notices are also provided to keep parts clean and contain fluids.
This document provides instructions for removing and installing various engine components on a Caterpillar 320D RR excavator, including:
- Removing and installing the flywheel using various tools
- Removing and installing the crankshaft rear seal
- Removing and installing the flywheel housing
- Removing and installing the crankshaft pulley
The summaries provide an overview of the component being worked on and refer the user to the specific section of the document for full instructions.
The document provides instructions for removing and installing a flywheel housing on a 320D RR excavator. It describes removing the electric starting motor and flywheel first. Then a lifting device and link bracket are used to remove bolts securing the housing. The housing weighs approximately 29 kg and is removed along with the gasket. A driver group tool is used to remove the oil seal from the housing. Reinstallation involves installing a new gasket and oil seal then securing the housing with bolts and washers.
Caterpillar cat 320 d rr excavator (prefix gmx) service repair manual (gmx000...fjkskedmme
The document provides instructions for removing and installing a flywheel housing on a 320D RR excavator. It describes removing the electric starting motor, flywheel, bolts and washers securing the housing. It also includes removing the gasket and oil seal from the housing. For installation, it specifies cleaning and applying retaining compound before installing a new oil seal and reattaching the housing with bolts and washers.
Caterpillar cat 320 d lrr excavator (prefix gmx) service repair manual (gmx00...fjkskedmme
This document provides instructions for removing and installing various engine components on a Caterpillar 320D RR excavator, including:
- Removing and installing the flywheel using various tools
- Removing and installing the crankshaft rear seal
- Removing and installing the flywheel housing
- Removing and installing the crankshaft pulley
The summaries provide an overview of the component being worked on and refer the user to the detailed instructions and illustrations in the document.
Caterpillar cat 320 d lrr excavator (prefix gmx) service repair manual (gmx00...fjskefksemer
This document provides instructions for removing and installing various engine components on a Caterpillar 320D RR excavator, including:
- Removing and installing the flywheel using various tools
- Removing and installing the crankshaft rear seal
- Removing and installing the flywheel housing
- Removing and installing the crankshaft pulley
The summaries provide an overview of the component being worked on and refer the user to the detailed instructions and illustrations in the document.
The document provides instructions for removing and installing a flywheel housing on an excavator. Key steps include:
1. Removing bolts and washers to separate the flywheel housing from the cylinder block.
2. Lifting the flywheel housing off using tooling and a lifting device, as it weighs approximately 29 kg.
3. Removing the gasket between the flywheel housing and cylinder block.
The document provides instructions for removing and installing various engine components on a Caterpillar 320D L excavator including:
- Removing the flywheel using link brackets and forcing bolts.
- Removing the crankshaft rear seal using a slide hammer puller and seal distorter.
- Installing a new crankshaft rear seal with a wear sleeve using an installer, locator, bolts and washer.
- Removing the flywheel housing using link brackets and lifting it off with bolts and washers.
- Installing a new oil seal and bolting the flywheel housing back on with new gaskets.
- Removing the crankshaft pulley using a combination puller
New Holland 9484 Tractor Service Repair Manual.pdfyfjskemdmdm
This document provides instructions for removing, inspecting, and installing components of the air induction system for a New Holland 84 Series tractor, including the air induction tube, rubber boot, and precleaner. The steps outlined remove each component one by one, describe what to inspect for, and then provide the reverse process for installation. Key points covered are using proper safety procedures before working on the engine, inspecting parts for cracks or damage, and ensuring a tight seal when reinstalling components.
New Holland 9684 Tractor Service Repair Manual.pdfyfjskemdmdm
This document provides instructions for removing, inspecting, and installing components of the air induction system for a New Holland 84 Series tractor, including the air induction tube, rubber boot, and precleaner. The steps outlined remove each component one by one, describe what to inspect for, and then provide the reverse process for installation. Key points covered are using proper safety procedures before working on the engine, inspecting parts for cracks or damage, and ensuring a tight seal when reinstalling components.
New Holland 9884 Tractor Service Repair Manual.pdfyfjskemdmdm
The document contains sections from a repair manual for 84 series tractors. It details the air induction system, including descriptions of individual components like the air induction tube, rubber boot, precleaner, and air cleaner. It provides specifications for air intake and airflow for different tractor models. The section describes removal and repair procedures for the air induction tube and other components.
Caterpillar Cat 320L EXCAVATOR (Prefix 9WG) Service Repair Manual (9WG00001-0...yfjskemdmdm
This document provides instructions for removing and installing a governor from an excavator engine. It describes:
1) Removing the governor by disconnecting linkages and tubes, and removing mounting bolts.
2) Installing the governor by reversing the removal process and installing new O-rings, and adjusting settings using specialized tools.
3) Removing the fuel injection control linkage by removing clips and pins connecting it to the governor.
4) Installing the fuel injection control linkage by reattaching it to the governor and setting brackets using a torque sequence.
The document provides instructions for removing and installing various engine components on a Caterpillar D8T track-type tractor with a C15 engine. It describes how to remove and install the power take-off drive group, crankshaft front seal, vibration damper and pulley, and front cover. The procedures include lists of required tools and multi-step processes illustrated with diagrams. Completing the front cover installation is noted as the final step.
Kubota D1503-M-DI DIESEL ENGINE Service Repair Manual.pdfyfjskemdmdm
This document provides specifications for several Kubota diesel engine models. It includes information on displacement, power output, operating speed, lubrication system, cooling system, and dimensions. The specifications cover single-cylinder, three-cylinder, and four-cylinder engine configurations with power ratings ranging from 20kW to 44kW. Performance data such as fuel injection details and compression ratios are also listed for each model.
This document provides instructions for disassembling and assembling the final drive on a D8T track-type tractor. The disassembly procedure involves removing over 20 components from the final drive including planetary carriers, gears, seals, and sprocket hubs using various tools. The assembly procedure is the reverse of disassembly, instructing technicians to install components in the proper order and torque bolts correctly. Safety notices are provided regarding lifting heavy components and using hydraulic tools to disassemble press-fit components.
Caterpillar Cat 320N EXCAVATOR (Prefix 9WG) Service Repair Manual (9WG00001-0...yfjskemdmdm
This document provides instructions for removing and installing a governor from an excavator engine. It describes:
1) Removing the governor by disconnecting linkages and tubes, and removing mounting bolts.
2) Installing the governor by reversing the removal process and installing new O-rings, and adjusting settings using specialized tools.
3) Removing the fuel injection control linkage by removing mounting bolts and disconnecting from the governor.
4) Installing the fuel injection control linkage by reconnecting it to the governor and adjusting brackets using a torque wrench.
The document provides instructions for removing and installing a flywheel on Caterpillar 320E RR and 320E LRR excavator models. The removal process involves using guide studs and lifting equipment to support the flywheel, then removing mounting bolts. The flywheel and ring gear are inspected for wear or damage. To install the flywheel, guide studs and lifting equipment are used to position the flywheel before tightening the mounting bolts and checking runout. Special steps are outlined for models equipped with rear power take-off.
CASE IH AXIAL-FLOW 5130 Combine Service Repair Manual (PIN YDG009296 and abov...yfjskemdmdm
This service manual provides maintenance and repair information for Axial-Flow combines 5130, 6130, and 7130. It contains over 30 chapters covering all major systems of the combines like the engine, transmission, hydraulics, electrical, attachments, feeding, threshing, and separation. The manual is intended for use by technicians and includes contents, introduction, and sections for each system with part numbers and diagrams.
CASE IH AXIAL-FLOW 6130 Combine Service Repair Manual (PIN YDG009296 and abov...yfjskemdmdm
This service manual provides maintenance and repair information for Axial-Flow combines 5130, 6130, and 7130. It contains over 30 chapters covering all major systems of the combines like the engine, transmission, hydraulics, electrical, attachments, feeding, threshing, and separation. The manual is intended for use by technicians and includes contents, introduction, and sections for each system with part numbers and diagrams.
CASE IH AXIAL-FLOW 7130 Combine Service Repair Manual (PIN YDG009296 and abov...yfjskemdmdm
This service manual provides instructions for servicing the engine and components of Axial-Flow combine models 5130, 6130, and 7130. The document covers removing and installing the engine, which involves disconnecting electrical and fluid connections, removing mounting hardware, and lifting the engine out of the machine. Safety precautions are provided to disengage machinery and avoid injury when servicing equipment.
More Related Content
Similar to Caterpillar Cat 320D Excavator (Prefix MGG) Service Repair Manual (MGG00001 and up).pdf
This document provides instructions for removing and installing various engine components on a Caterpillar 320D RR excavator, including:
- Removing and installing the flywheel using various tools
- Removing and installing the crankshaft rear seal
- Removing and installing the flywheel housing
- Removing and installing the crankshaft pulley
The document gives detailed step-by-step instructions and illustrations for each procedure, and lists the required tools. Safety notices are provided to keep parts clean and contain fluids.
This document provides instructions for removing and installing various engine components on a Caterpillar 320D RR excavator, including:
- Removing and installing the flywheel using various tools
- Removing and installing the crankshaft rear seal
- Removing and installing the flywheel housing
- Removing and installing the crankshaft pulley
The document contains detailed step-by-step instructions, illustrations, and safety notices for working on and servicing parts of the Caterpillar C6.4 engine.
This document provides instructions for removing and installing various engine components on a Caterpillar 320D RR excavator, including:
- Removing and installing the flywheel using various tools
- Removing and installing the crankshaft rear seal
- Removing and installing the flywheel housing
- Removing and installing the crankshaft pulley
The document gives detailed step-by-step instructions and illustrations for each procedure, and lists any required tools. Safety notices are also provided to keep parts clean and contain fluids.
This document provides instructions for removing and installing various engine components on a Caterpillar 320D RR excavator, including:
- Removing and installing the flywheel using various tools
- Removing and installing the crankshaft rear seal
- Removing and installing the flywheel housing
- Removing and installing the crankshaft pulley
The summaries provide an overview of the component being worked on and refer the user to the specific section of the document for full instructions.
The document provides instructions for removing and installing a flywheel housing on a 320D RR excavator. It describes removing the electric starting motor and flywheel first. Then a lifting device and link bracket are used to remove bolts securing the housing. The housing weighs approximately 29 kg and is removed along with the gasket. A driver group tool is used to remove the oil seal from the housing. Reinstallation involves installing a new gasket and oil seal then securing the housing with bolts and washers.
Caterpillar cat 320 d rr excavator (prefix gmx) service repair manual (gmx000...fjkskedmme
The document provides instructions for removing and installing a flywheel housing on a 320D RR excavator. It describes removing the electric starting motor, flywheel, bolts and washers securing the housing. It also includes removing the gasket and oil seal from the housing. For installation, it specifies cleaning and applying retaining compound before installing a new oil seal and reattaching the housing with bolts and washers.
Caterpillar cat 320 d lrr excavator (prefix gmx) service repair manual (gmx00...fjkskedmme
This document provides instructions for removing and installing various engine components on a Caterpillar 320D RR excavator, including:
- Removing and installing the flywheel using various tools
- Removing and installing the crankshaft rear seal
- Removing and installing the flywheel housing
- Removing and installing the crankshaft pulley
The summaries provide an overview of the component being worked on and refer the user to the detailed instructions and illustrations in the document.
Caterpillar cat 320 d lrr excavator (prefix gmx) service repair manual (gmx00...fjskefksemer
This document provides instructions for removing and installing various engine components on a Caterpillar 320D RR excavator, including:
- Removing and installing the flywheel using various tools
- Removing and installing the crankshaft rear seal
- Removing and installing the flywheel housing
- Removing and installing the crankshaft pulley
The summaries provide an overview of the component being worked on and refer the user to the detailed instructions and illustrations in the document.
The document provides instructions for removing and installing a flywheel housing on an excavator. Key steps include:
1. Removing bolts and washers to separate the flywheel housing from the cylinder block.
2. Lifting the flywheel housing off using tooling and a lifting device, as it weighs approximately 29 kg.
3. Removing the gasket between the flywheel housing and cylinder block.
The document provides instructions for removing and installing various engine components on a Caterpillar 320D L excavator including:
- Removing the flywheel using link brackets and forcing bolts.
- Removing the crankshaft rear seal using a slide hammer puller and seal distorter.
- Installing a new crankshaft rear seal with a wear sleeve using an installer, locator, bolts and washer.
- Removing the flywheel housing using link brackets and lifting it off with bolts and washers.
- Installing a new oil seal and bolting the flywheel housing back on with new gaskets.
- Removing the crankshaft pulley using a combination puller
Similar to Caterpillar Cat 320D Excavator (Prefix MGG) Service Repair Manual (MGG00001 and up).pdf (10)
New Holland 9484 Tractor Service Repair Manual.pdfyfjskemdmdm
This document provides instructions for removing, inspecting, and installing components of the air induction system for a New Holland 84 Series tractor, including the air induction tube, rubber boot, and precleaner. The steps outlined remove each component one by one, describe what to inspect for, and then provide the reverse process for installation. Key points covered are using proper safety procedures before working on the engine, inspecting parts for cracks or damage, and ensuring a tight seal when reinstalling components.
New Holland 9684 Tractor Service Repair Manual.pdfyfjskemdmdm
This document provides instructions for removing, inspecting, and installing components of the air induction system for a New Holland 84 Series tractor, including the air induction tube, rubber boot, and precleaner. The steps outlined remove each component one by one, describe what to inspect for, and then provide the reverse process for installation. Key points covered are using proper safety procedures before working on the engine, inspecting parts for cracks or damage, and ensuring a tight seal when reinstalling components.
New Holland 9884 Tractor Service Repair Manual.pdfyfjskemdmdm
The document contains sections from a repair manual for 84 series tractors. It details the air induction system, including descriptions of individual components like the air induction tube, rubber boot, precleaner, and air cleaner. It provides specifications for air intake and airflow for different tractor models. The section describes removal and repair procedures for the air induction tube and other components.
Caterpillar Cat 320L EXCAVATOR (Prefix 9WG) Service Repair Manual (9WG00001-0...yfjskemdmdm
This document provides instructions for removing and installing a governor from an excavator engine. It describes:
1) Removing the governor by disconnecting linkages and tubes, and removing mounting bolts.
2) Installing the governor by reversing the removal process and installing new O-rings, and adjusting settings using specialized tools.
3) Removing the fuel injection control linkage by removing clips and pins connecting it to the governor.
4) Installing the fuel injection control linkage by reattaching it to the governor and setting brackets using a torque sequence.
The document provides instructions for removing and installing various engine components on a Caterpillar D8T track-type tractor with a C15 engine. It describes how to remove and install the power take-off drive group, crankshaft front seal, vibration damper and pulley, and front cover. The procedures include lists of required tools and multi-step processes illustrated with diagrams. Completing the front cover installation is noted as the final step.
Kubota D1503-M-DI DIESEL ENGINE Service Repair Manual.pdfyfjskemdmdm
This document provides specifications for several Kubota diesel engine models. It includes information on displacement, power output, operating speed, lubrication system, cooling system, and dimensions. The specifications cover single-cylinder, three-cylinder, and four-cylinder engine configurations with power ratings ranging from 20kW to 44kW. Performance data such as fuel injection details and compression ratios are also listed for each model.
This document provides instructions for disassembling and assembling the final drive on a D8T track-type tractor. The disassembly procedure involves removing over 20 components from the final drive including planetary carriers, gears, seals, and sprocket hubs using various tools. The assembly procedure is the reverse of disassembly, instructing technicians to install components in the proper order and torque bolts correctly. Safety notices are provided regarding lifting heavy components and using hydraulic tools to disassemble press-fit components.
Caterpillar Cat 320N EXCAVATOR (Prefix 9WG) Service Repair Manual (9WG00001-0...yfjskemdmdm
This document provides instructions for removing and installing a governor from an excavator engine. It describes:
1) Removing the governor by disconnecting linkages and tubes, and removing mounting bolts.
2) Installing the governor by reversing the removal process and installing new O-rings, and adjusting settings using specialized tools.
3) Removing the fuel injection control linkage by removing mounting bolts and disconnecting from the governor.
4) Installing the fuel injection control linkage by reconnecting it to the governor and adjusting brackets using a torque wrench.
The document provides instructions for removing and installing a flywheel on Caterpillar 320E RR and 320E LRR excavator models. The removal process involves using guide studs and lifting equipment to support the flywheel, then removing mounting bolts. The flywheel and ring gear are inspected for wear or damage. To install the flywheel, guide studs and lifting equipment are used to position the flywheel before tightening the mounting bolts and checking runout. Special steps are outlined for models equipped with rear power take-off.
CASE IH AXIAL-FLOW 5130 Combine Service Repair Manual (PIN YDG009296 and abov...yfjskemdmdm
This service manual provides maintenance and repair information for Axial-Flow combines 5130, 6130, and 7130. It contains over 30 chapters covering all major systems of the combines like the engine, transmission, hydraulics, electrical, attachments, feeding, threshing, and separation. The manual is intended for use by technicians and includes contents, introduction, and sections for each system with part numbers and diagrams.
CASE IH AXIAL-FLOW 6130 Combine Service Repair Manual (PIN YDG009296 and abov...yfjskemdmdm
This service manual provides maintenance and repair information for Axial-Flow combines 5130, 6130, and 7130. It contains over 30 chapters covering all major systems of the combines like the engine, transmission, hydraulics, electrical, attachments, feeding, threshing, and separation. The manual is intended for use by technicians and includes contents, introduction, and sections for each system with part numbers and diagrams.
CASE IH AXIAL-FLOW 7130 Combine Service Repair Manual (PIN YDG009296 and abov...yfjskemdmdm
This service manual provides instructions for servicing the engine and components of Axial-Flow combine models 5130, 6130, and 7130. The document covers removing and installing the engine, which involves disconnecting electrical and fluid connections, removing mounting hardware, and lifting the engine out of the machine. Safety precautions are provided to disengage machinery and avoid injury when servicing equipment.
CASE IH A8800 MR Cane Harvester Service Repair Manual (from PIN PRCY8800VFPA0...yfjskemdmdm
This document provides a service manual for an A8800 MR Cane Harvester. It includes sections on the engine, transmission, axles, hydraulic and braking systems, tracks, cab controls, attachments/headers, product feeding, chopping, and cleaning components. Detailed specifications, component locations, removal and installation instructions are provided for maintenance and repair. Safety information is also included at the beginning.
CASE IH CVX 160 Tractor Service Repair Manual.pdfyfjskemdmdm
This service manual provides information for servicing the following models: CVX 140, CVX 150, CVX 160, CVX 175, CVX 195 Tractor. The document includes sections on the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, cab climate control, and electrical systems. It provides detailed instructions on maintenance, repair, and replacement of components, with diagrams. Safety notices are included throughout to warn technicians of hazards.
CASE IH CVX 175 Tractor Service Repair Manual.pdfyfjskemdmdm
This service manual provides information for servicing the following models: CVX 140, CVX 150, CVX 160, CVX 175, CVX 195 Tractor. The document includes sections on the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, cab climate control, and electrical systems. It provides detailed instructions on maintenance, repair, and replacement of components, with diagrams. Safety notices are included throughout to warn technicians of hazards.
CASE IH CVX 140 Tractor Service Repair Manual.pdfyfjskemdmdm
This service manual provides information for servicing the following components of CVX tractors:
- Engine systems including the valve drive and gears, cylinder heads, fuel injection system, turbocharger, and engine cooling, lubrication and intake/exhaust systems.
- Transmission systems including the continuously variable transmission (CVT), four-wheel drive system, and power take-off (PTO).
- Axle systems including the front and rear axles.
- Brake and hydraulic systems.
- Electrical systems for engine, transmission, hydraulic and other components.
- Steering systems.
- Cab climate control and other miscellaneous systems.
The document provides detailed removal and installation instructions, maintenance procedures
CASE IH CVX 195 Tractor Service Repair Manual.pdfyfjskemdmdm
This service manual provides information for servicing the following models: CVX 140, CVX 150, CVX 160, CVX 175, CVX 195 Tractor. The document includes sections on the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, cab climate control, and electrical systems. It provides detailed instructions on maintenance, repair, and replacement of components, with diagrams. Safety notices are included throughout to warn technicians of hazards.
CASE IH CVX 150 Tractor Service Repair Manual.pdfyfjskemdmdm
This service manual provides information for servicing the following models: CVX 140, CVX 150, CVX 160, CVX 175, CVX 195 Tractor. The document includes sections on the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, cab climate control, and electrical systems. It provides detailed instructions on maintenance, repair, and replacement of components, with diagrams. Safety notices are included throughout to warn technicians of hazards.
New Holland TG245 Tractor Service Repair Manual.pdfyfjskemdmdm
This document provides a table of contents for a tractor repair manual. It lists sections covering topics like standard torque specifications, safety information, engine removal and installation, fuel tank removal, cooling system removal, and power transmission system operation and troubleshooting. The transmission sections provide information on splitting the front frame from the transmission, splitting the speed and range transmissions, speed transmission repair, and splitting the range transmission from the rear frame.
New Holland TJ325 Tractor Service Repair Manual.pdfyfjskemdmdm
The document provides safety warnings and instructions, emphasizing the importance of reading the operator's manual, operating controls only from the seat, not allowing riders, studying safety messages before starting the engine, wearing proper protective clothing, and placing a "Do Not Operate" tag on the key when removing it for service or repair work. Proper safety procedures such as parking on level ground, engaging the parking brake, removing the key, and blocking the wheels are also outlined.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320D L EXCAVATOR MGG
Configuration: 320D & 320D L Excavators MGG00001-UP (MACHINE) POWERED BY C6.4 Engine
Disassembly and Assembly
C6.4 Engine for Caterpillar Built Machines
Media Number -KENR8106-09 Publication Date -01/10/2017 Date Updated -18/10/2017
i02743771
Flywheel - Remove
SMCS - 1156-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 1
B Forcing bolts M16 - 2 by 120 mm 2
Start By:
a. Remove the crankshaft position sensor. Refer to Disassembly and Assembly, "Crankshaft
Position Sensor - Remove and Install".
b. Remove the muffler. Refer to Disassembly and Assembly, "Muffler - Remove and Install".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/3(W)
w
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
3. Illustration 1 g01374966
1. Remove muffler brackets (1).
Illustration 2 g01374968
Illustration 3 g01374970
2. Remove bolts (2).
3. Install Tooling (A) and a suitable lifting device onto flywheel (3).
4. Use Tooling (B) in order to remove flywheel (3) out of the housing. The weight of flywheel
(3) is approximately 50 kg (110 lb).
2/3(W)
w
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
4. 5. Perform the following procedure in order to remove the flywheel ring gear.
Illustration 4 g01374977
Typical Example
a. Place flywheel (3) and ring gear (4) on suitable cribbing.
Note: Mark the orientation of ring gear (4) on flywheel (3) for assembly purposes.
Always wear protective gloves when handling parts that have been
heated.
b. Raise the temperature of ring gear (4) uniformly.
c. Remove the ring gear (4) by tapping ring gear (4) all the way around flywheel (3).
d. Reposition flywheel (3) in order to remove ring gear (4).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Feb 2 09:07:57 UTC+0800 2020
3/3(W)
w
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
5. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320D L EXCAVATOR MGG
Configuration: 320D & 320D L Excavators MGG00001-UP (MACHINE) POWERED BY C6.4 Engine
Disassembly and Assembly
C6.4 Engine for Caterpillar Built Machines
Media Number -KENR8106-09 Publication Date -01/10/2017 Date Updated -18/10/2017
i02744399
Flywheel - Install
SMCS - 1156-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Always wear protective gloves when handling parts that have been
heated.
1. Perform the following procedure, if the ring gear was removed from the flywheel:
a. Raise the temperature of the ring gear 149 °C (300 °F).
1/3(W)
w
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
6. b. Use a suitable press in order to install the ring gear onto the flywheel.
Note: Prior to the installation of the flywheel, refer to Specifications, "Flywheel" for
information on checking the flywheel assembly for flatness.
Illustration 1 g01374993
2. Install Tooling (A) and a suitable lifting device onto flywheel (3).
3. Install flywheel (3). The weight of flywheel (3) is approximately 50 kg (110 lb).
Illustration 2 g01374968
4. Install bolts (2) in order to secure flywheel (3) onto the crankshaft. Tighten bolts (2) to a
torque of 83 ± 5 N·m (61 ± 4 lb ft).
5. Remove Tooling (A) from flywheel (3).
2/3(W)
w
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
7. Illustration 3 g01374966
6. Install muffler brackets (1).
7. Check the flywheel runout. Refer to Testing and Adjusting, "Flywheel Housing - Inspect"
for more information on flywheel runout.
End By:
a. Install the muffler. Refer to Disassembly and Assembly, "Muffler - Remove and Install".
b. Install the crankshaft position sensor. Refer to Disassembly and Assembly, "Crankshaft
Position Sensor - Remove and Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Feb 2 09:08:53 UTC+0800 2020
3/3(W)
w
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
8. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320D L EXCAVATOR MGG
Configuration: 320D & 320D L Excavators MGG00001-UP (MACHINE) POWERED BY C6.4 Engine
Disassembly and Assembly
C6.4 Engine for Caterpillar Built Machines
Media Number -KENR8106-09 Publication Date -01/10/2017 Date Updated -18/10/2017
i01135944
Crankshaft Rear Seal - Remove
SMCS - 1161-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-7600 Slide Hammer Puller 1
B
5P-7312 Seal Distorter 1
5P-7338 Distorter Ring 2
Start By:
a. Remove the flywheel. Refer to Disassembly and Assembly, "Flywheel - Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
1/3(W)
w
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
9. of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00604840
Note: If the oil seal shows a sign of oil leaks, remove the wear sleeve and the oil seal.
1. Drill three evenly spaced 3 mm (0.12 inch) holes in crankshaft rear seal (1).
2. Use Tool (A) to remove the crankshaft rear seal.
Illustration 2 g00604844
3. Use Tool (B) to remove the wear sleeve (2) (not shown) from the rear of the crankshaft.
Note: When you are removing the wear sleeve, take extreme care not to damage the
crankshaft.
2/3(W)
w
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
10. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320D L EXCAVATOR MGG
Configuration: 320D & 320D L Excavators MGG00001-UP (MACHINE) POWERED BY C6.4 Engine
Disassembly and Assembly
C6.4 Engine for Caterpillar Built Machines
Media Number -KENR8106-09 Publication Date -01/10/2017 Date Updated -18/10/2017
i01615317
Crankshaft Rear Seal - Install
SMCS - 1161-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
9U-6169 Installer 1
9U-6171 Locator 1
9U-6172 Bolt 2
5P-8247 Hard Washer 1
6V-3303 Bolt 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. To install a new wear sleeve that is complete with a seal, use 169-5464 Quick Cure Primer
to clean the outer diameter of the crankshaft and the inside diameter of the wear sleeve.
Apply 4C-9507 Retaining Compound to the faces of all the mating parts.
1/3(W)
w
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
11. Illustration 1 g00604874
2. Install a new wear sleeve that is complete with a seal (1) (not shown) with Tool (A), as
follows:
Illustration 2 g00604875
a. Install 9U-6171 Locator (3) onto the crankshaft with 9U-6172 Bolt (4).
b. Put the new wear sleeve that is complete with a seal in 9U-6169 Installer (2).
c. Put 6V-3303 Bolt (6) through 5P-8247 Hard Washer (5) and 9U-6169 Installer (2)
and thread into 9U-6171 Locator (3).
d. Push the wear sleeve that is complete with a seal onto the crankshaft until 9U-6169
Installer (2) bottoms out.
2/3(W)
w
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
12. Illustration 3 g00604874
e. Remove Tool (A) and check crankshaft rear seal (1) (not shown) for correct
installation.
End By:
a. Install the flywheel. Refer to Disassembly and Assembly, "Flywheel - Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Feb 2 09:10:44 UTC+0800 2020
3/3(W)
w
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
13. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320D L EXCAVATOR MGG
Configuration: 320D & 320D L Excavators MGG00001-UP (MACHINE) POWERED BY C6.4 Engine
Disassembly and Assembly
C6.4 Engine for Caterpillar Built Machines
Media Number -KENR8106-09 Publication Date -01/10/2017 Date Updated -18/10/2017
i02742697
Flywheel Housing - Remove and Install
SMCS - 1157-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 1
B 1P-0510 Driver Group 1
Start By:
a. Remove the electric starting motor. Refer to Disassembly and Assembly, "Electric Starting
Motor- Remove and Install".
b. Remove the flywheel and ring gear. Refer to Disassembly and Assembly, "Flywheel -
Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/4(W)
w
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
14. Illustration 1 g01374571
1. Install Tooling (A), and a suitable lifting device onto flywheel housing (3).
2. Remove bolts (2) and the washers that secure flywheel housing (3) to the cylinder block.
3. Remove flywheel housing (3). The weight of flywheel (3) is approximately 29 kg (65 lb).
4. Remove gasket (1) (not shown).
Illustration 2 g01374572
5. Use Tooling (B) in order to remove the oil seal (4) (not shown).
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 1
B 1P-0510 Driver Group 1
NOTICE
2/4(W)
w
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
15. Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 3 g01374614
1. Use Tooling (B) in order to install the oil seal (4) (not shown).
Illustration 4 g01374571
2. Check the condition of two dowels (not shown). If dowels are damaged, use new parts for
replacement.
3. Clean old gasket (1) (not shown) from the mating surfaces of the cylinder block and the
flywheel housing. Install a new gasket on the cylinder block.
4. Place flywheel housing (3) in position on the cylinder block.
5. Install the washers and bolts (2) in order to secure flywheel housing (3) to the cylinder
block.
6. Remove Tooling (A).
End By:
3/4(W)
w
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
16. a. Install the flywheel. Refer to Disassembly and Assembly, "Flywheel - Install".
b. Install the electric starting motor. Refer to Disassembly and Assembly, "Electric Starting
Motor- Remove and Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Feb 2 09:11:40 UTC+0800 2020
4/4(W)
w
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
17. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320D L EXCAVATOR MGG
Configuration: 320D & 320D L Excavators MGG00001-UP (MACHINE) POWERED BY C6.4 Engine
Disassembly and Assembly
C6.4 Engine for Caterpillar Built Machines
Media Number -KENR8106-09 Publication Date -01/10/2017 Date Updated -18/10/2017
i06790404
Crankshaft Pulley - Remove and Install
SMCS - 1205-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2321 Combination Puller 1
B 6V-9120 Socket(1)
1
(1)
Tooling (B) is a 46 mm socket.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. Remove the belt. Refer to Operation and Maintenance Manual, "Belt -
Inspect/Adjust/Replace".
1/4(W)
w
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
18. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
19. Illustration 1 g00604778
2. Use Tooling (B) in order to remove nut (1) and washer (2) from the threaded end of the
crankshaft.
Illustration 2 g00604784
3. Use Tooling (A) in order to remove crankshaft pulley (3) from the engine.
2/4(W)
w
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
20. Illustration 3 g00604792
4. If it is necessary to remove wear sleeve (4) from crankshaft pulley (3), use a suitable
hammer and a suitable chisel. Hold the suitable chisel at right angles to the surface of the
wear sleeve. Tap the wear sleeve in three places. You can remove the wear sleeve once the
tension is released.
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
B 6V-9120 Socket(1)
1
C 1P-0510 Driver Gp 1
(1)
Tooling (B) is a 46 mm socket.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. Raise the temperature of the wear sleeve. Use Tooling (C) in order to install the wear sleeve
onto the crankshaft pulley.
3/4(W)
w
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
21. Illustration 4 g01377941
2. Ensure that baffle plate (5) is oriented, as shown.
Illustration 5 g00604778
3. Position crankshaft pulley (3) onto the engine.
4. Install washer (2) and nut (1). Use Tooling (B) in order to tighten nut (1) to a torque of
707.5 ± 57.5 N·m (522 ± 42 lb ft).
5. Install the belt. Refer to Operation and Maintenance Manual, "Belt -
Inspect/Adjust/Replace".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Feb 2 09:12:35 UTC+0800 2020
4/4(W)
w
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
22. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320D L EXCAVATOR MGG
Configuration: 320D & 320D L Excavators MGG00001-UP (MACHINE) POWERED BY C6.4 Engine
Disassembly and Assembly
C6.4 Engine for Caterpillar Built Machines
Media Number -KENR8106-09 Publication Date -01/10/2017 Date Updated -18/10/2017
i02742689
Crankshaft Front Seal - Remove
SMCS - 1160-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-7600 Slide Hammer Puller 1
Start By:
a. Remove the crankshaft pulley. Refer to Disassembly and Assembly, "Crankshaft Pulley -
Remove and Install".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
1/2(W)
w
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
23. Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00529162
Typical Example
1. Drill three evenly spaced 3.0 mm (0.12 inch) holes in crankshaft front seal (1).
2. Use Tooling (A) in order to remove crankshaft front seal (1). Remove the seal evenly by
alternating the position of Tooling (A) from hole to hole.
Note: Do not damage the flange of the crankshaft during the removal process for the
crankshaft front seal.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Feb 2 09:13:31 UTC+0800 2020
2/2(W)
w
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...