1) The document provides disassembly instructions for components of a 313D excavator including the final drive, travel motor, counterbalance valve, and traction control valve.
2) It lists required tools and outlines over 30 steps to disassemble components such as removing covers, plates, gears, seals, springs, and pistons.
3) Safety precautions are provided, warning of potential injury from parts propelled by springs, hydraulic pressure, and heavy component weight during disassembly.
Caterpillar cat 313 d excavator (prefix kxd) service repair manual (kxd00001 ...ifosodkmsme
This document provides instructions for disassembling various components of a 313D excavator, including the final drive, travel motor, counterbalance valve, and traction control valve. It lists over 30 detailed steps for disassembling each component, and identifies required tools. Safety notices are included throughout to warn of potential injuries from parts propelled by springs or pressurized fluids.
Caterpillar cat 313 d excavator (prefix kxd) service repair manual (kxd00001 ...fjskekdmjekm
This document provides instructions for disassembling various components of a 313D excavator, including the final drive, travel motor, counterbalance valve, and travel motor. It lists the required tools and outlines 16 steps to disassemble parts like the sprockets, valves, pistons, plates, springs, and seals. Safety notices are included to warn of potential injuries from fluids, pressures, and released spring forces when handling or disassembling parts.
Caterpillar cat 312 d excavator (prefix dlp) service repair manual (dlp00001 ...dueikdkmem
1) The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 312D excavator.
2) It lists over 30 detailed steps to disassemble components like the final drive, travel motor, sprockets, gears, plates, seals and more.
3) Safety precautions are provided throughout to warn of potential injuries from parts propelled by springs or pressurized fluids.
Caterpillar cat 312 d excavator (prefix dlp) service repair manual (dlp00001 ...fjskekxcddmmme
1) The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 312D excavator.
2) It lists the required tools and outlines over 30 steps to disassemble components such as the sprocket, traction control valve, barrel assembly, piston assembly, and planetary gear assembly.
3) Safety warnings are provided regarding the risks of hydraulic pressure, moving parts, and springs during disassembly. Personnel are instructed to take precautions like wearing protective equipment and releasing pressures safely.
This document provides instructions for disassembling the final drive, travel motor, and counterbalance valve of a 312D excavator. It lists the required tools and outlines 20 steps to disassemble parts like the traction control valve, bearing, relief valve assemblies, piston assemblies, barrel assembly, and more. Safety notices are included to warn of potential injuries from parts propelled by springs or pressurized hydraulic fluid.
This document provides instructions for disassembling the final drive, travel motor, and counterbalance valve of a 312D excavator. It lists the required tools and outlines 20 steps to disassemble parts like the traction control valve, bearing, relief valve assemblies, piston assemblies, barrel assembly, and more. Safety notices are included to warn of potential injuries from parts propelled by springs or pressurized hydraulic fluid.
Caterpillar cat 312 d excavator (prefix dlp) service repair manual (dlp00001 ...ikdkdmdm
1) The document provides disassembly instructions for components of a 312D excavator, including the final drive, travel motor, counterbalance valve, and other systems.
2) Detailed steps are given to remove parts like sprockets, valves, pistons, gears, plates and seals. Special tools are listed.
3) Safety precautions are provided, warning of heavy parts, pressurized fluids, and springs that could cause injury if not properly released. Care must be taken to contain fluids and release pressures safely.
1) The document provides disassembly instructions for components of a 312D excavator including the final drive, travel motor, counterbalance valve, and other systems.
2) It describes removing parts like sprockets, valves, gears, plates, and seals, noting weights of components and any special tools or precautions needed.
3) Detailed illustrations accompany each step to ensure correct disassembly and reassembly of parts in their original positions and orientations.
Caterpillar cat 313 d excavator (prefix kxd) service repair manual (kxd00001 ...ifosodkmsme
This document provides instructions for disassembling various components of a 313D excavator, including the final drive, travel motor, counterbalance valve, and traction control valve. It lists over 30 detailed steps for disassembling each component, and identifies required tools. Safety notices are included throughout to warn of potential injuries from parts propelled by springs or pressurized fluids.
Caterpillar cat 313 d excavator (prefix kxd) service repair manual (kxd00001 ...fjskekdmjekm
This document provides instructions for disassembling various components of a 313D excavator, including the final drive, travel motor, counterbalance valve, and travel motor. It lists the required tools and outlines 16 steps to disassemble parts like the sprockets, valves, pistons, plates, springs, and seals. Safety notices are included to warn of potential injuries from fluids, pressures, and released spring forces when handling or disassembling parts.
Caterpillar cat 312 d excavator (prefix dlp) service repair manual (dlp00001 ...dueikdkmem
1) The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 312D excavator.
2) It lists over 30 detailed steps to disassemble components like the final drive, travel motor, sprockets, gears, plates, seals and more.
3) Safety precautions are provided throughout to warn of potential injuries from parts propelled by springs or pressurized fluids.
Caterpillar cat 312 d excavator (prefix dlp) service repair manual (dlp00001 ...fjskekxcddmmme
1) The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 312D excavator.
2) It lists the required tools and outlines over 30 steps to disassemble components such as the sprocket, traction control valve, barrel assembly, piston assembly, and planetary gear assembly.
3) Safety warnings are provided regarding the risks of hydraulic pressure, moving parts, and springs during disassembly. Personnel are instructed to take precautions like wearing protective equipment and releasing pressures safely.
This document provides instructions for disassembling the final drive, travel motor, and counterbalance valve of a 312D excavator. It lists the required tools and outlines 20 steps to disassemble parts like the traction control valve, bearing, relief valve assemblies, piston assemblies, barrel assembly, and more. Safety notices are included to warn of potential injuries from parts propelled by springs or pressurized hydraulic fluid.
This document provides instructions for disassembling the final drive, travel motor, and counterbalance valve of a 312D excavator. It lists the required tools and outlines 20 steps to disassemble parts like the traction control valve, bearing, relief valve assemblies, piston assemblies, barrel assembly, and more. Safety notices are included to warn of potential injuries from parts propelled by springs or pressurized hydraulic fluid.
Caterpillar cat 312 d excavator (prefix dlp) service repair manual (dlp00001 ...ikdkdmdm
1) The document provides disassembly instructions for components of a 312D excavator, including the final drive, travel motor, counterbalance valve, and other systems.
2) Detailed steps are given to remove parts like sprockets, valves, pistons, gears, plates and seals. Special tools are listed.
3) Safety precautions are provided, warning of heavy parts, pressurized fluids, and springs that could cause injury if not properly released. Care must be taken to contain fluids and release pressures safely.
1) The document provides disassembly instructions for components of a 312D excavator including the final drive, travel motor, counterbalance valve, and other systems.
2) It describes removing parts like sprockets, valves, gears, plates, and seals, noting weights of components and any special tools or precautions needed.
3) Detailed illustrations accompany each step to ensure correct disassembly and reassembly of parts in their original positions and orientations.
Caterpillar cat 312 d excavator (prefix dlp) service repair manual (dlp00001 ...cdfzxs
This document provides instructions for disassembling the final drive, travel motor, and counterbalance valve of a 312D excavator. It lists the required tools and gives step-by-step procedures to remove components such as sprockets, fittings, valves, springs, seals, and plates. Safety notices are included to warn of potential injuries from pressurized fluids, heavy parts, and released spring forces during disassembly.
1) The document provides disassembly instructions for components of a 312D excavator, including the final drive, travel motor, counterbalance valve, and other systems.
2) Detailed steps are given to remove parts like sprockets, valves, pistons, gears, plates and seals. Special tools are listed.
3) Safety precautions are provided, warning of heavy parts, pressurized fluids, and springs that could cause injury if not properly released. Care must be taken to contain fluids and release pressures safely.
This document provides instructions for disassembling the final drive, travel motor, and counterbalance valve of a 312D excavator. It lists the required tools and outlines 20 steps to disassemble parts like the traction control valve, bearing, relief valve assemblies, piston assemblies, barrel assembly, and more. Safety notices are included to warn of potential injuries from parts propelled by springs or pressurized hydraulic fluid.
Caterpillar Cat 312D L Excavator (Prefix TGY) Service Repair Manual Instant D...fijsekkdmdm2w
This document provides instructions for disassembling components of a 312D L excavator, including the final drive, travel motor, counterbalance valve, and travel motor. It lists required tools and outlines multi-step procedures for removing parts like sprockets, valves, pistons, springs, and plates. Safety notices warn of risks like fluid pressure, heavy component weights, and released spring forces during disassembly.
Caterpillar Cat 312D L Excavator (Prefix TGY) Service Repair Manual Instant D...zan2736ban
This document provides disassembly instructions for the final drive and travel motor of a 312D L excavator. It describes removing over 50 individual parts in multiple steps. Key parts that must be removed include the final drive, travel motor, sprockets, valves, gears, seals, plates, pistons, springs and other components. Technicians are warned to take safety precautions when disassembling parts under pressure from springs or that could otherwise cause injury. Detailed illustrations are provided to accompany each step.
Caterpillar cat 312 d l excavator (prefix tgy) service repair manual (tgy0000...ikdkdmddm
This document provides disassembly instructions for the final drive and travel motor of a 312D L excavator. It describes removing over 50 individual parts in multiple steps. Key parts that must be removed include the final drive, travel motor, sprockets, valves, gears, seals, plates, pistons, springs and other components. Technicians are warned to take safety precautions when disassembling parts under pressure from springs or that could otherwise cause injury. Marking components is recommended to aid reassembly.
Caterpillar Cat 312D L Excavator (Prefix TGY) Service Repair Manual (TGY00001...fusjekkdmdmd2w
This document provides instructions for disassembling components of a 312D L excavator, including the final drive, travel motor, counterbalance valve, and travel motor. It lists required tools and outlines multi-step procedures for removing parts like sprockets, valves, pistons, springs, and plates. Safety notices warn of risks like fluid pressure, heavy component weights, and released spring forces during disassembly.
Caterpillar Cat 312D L Excavator (Prefix TGY) Service Repair Manual (TGY00001...f8usejkddmmd
This document provides disassembly instructions for the final drive and travel motor of a 312D L excavator. It describes removing over 50 individual parts in multiple steps. Key parts that must be removed include the final drive, travel motor, sprockets, valves, pistons, gears, seals, and various fasteners. Technicians are warned to take safety precautions when compressing springs and to keep parts in their original positions for reassembly.
Caterpillar cat 312 d l excavator (prefix tgy) service repair manual (tgy0000...fhjsjkdmemm
This document provides disassembly instructions for the final drive, travel motor, and related components of a 312D L excavator. It lists required tools and outlines over 30 steps to disassemble parts like the final drive, traction control valve, counterbalance valve, travel motor barrel assembly, and planetary gearing. Safety notices are included to warn of potential injuries from parts propelled by springs or pressurized hydraulic oil.
Caterpillar Cat 312D L Excavator (Prefix TGY) Service Repair Manual (TGY00001...8ufjsekddm8u
This document provides instructions for disassembling components of a 312D L excavator, including the final drive, travel motor, counterbalance valve, and travel motor. It lists required tools and outlines multi-step procedures for removing parts like sprockets, valves, pistons, springs, and plates. Safety notices warn of risks like fluid pressure, heavy component weights, and released spring forces during the disassembly process.
The document provides instructions for disassembling and assembling a swivel and swing motor on an excavator. Key steps include:
1. Removing bolts, seals and components to separate the swivel housing, rotor and cover.
2. Applying clean oil before reassembling components and installing seals, retainer and cover.
3. Draining swing motor oil before disconnecting hoses and removing bolts to detach the motor.
4. Dismantling the swing motor involves removing valves, seals, springs and using tools to separate individual parts like pistons, plates and barrels.
Caterpillar Cat 336D2 and 336D2 L Excavator (Prefix YCF) Service Repair Manua...fskekkdmdmdm3e
The document provides instructions for disassembling and assembling a piston pump. It outlines 30 steps for assembly, beginning with installing various bearings, seals, pistons, springs and other components in the proper order. Disassembly instructions describe 8 steps, including removing the head, port plate, bearings, pistons, pins and other parts. Safety warnings are provided to prevent injury from spring forces.
Caterpillar Cat 312D L Excavator (Prefix XGK) Service Repair Manual Instant D...fskekkdmdmdm3e
- The document provides instructions for removing and installing the idler gear of the front gear group on a C4.2 engine for Caterpillar built machines.
- To remove the idler gear, the front housing must first be removed. Then the idler gear bolt, thrust plate, and idler gear can be taken off the idler gear shaft. An idler shaft puller and driver group may be needed.
- To install the idler gear, first press in a new bushing if needed. Then install the idler shaft, idler gear, thrust plate, washer and idler gear bolt. Tighten the bolt to the specified torque.
Caterpillar Cat 336D L Excavator (Prefix J6D) Service Repair Manual Instant D...fskekkdmdmdm3e
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The 25 step disassembly process removes components like housing, gears, seals and bearings. The 22 step assembly process reverses this to rebuild the final drive, applying loctite and torquing bolts to specification. Tools required include link brackets, crossblocks, drivers and torque wrenches. Safety precautions are noted for releasing spring forces.
Caterpillar Cat 336F and 336F L Excavator (Prefix DSW) Service Repair Manual ...fskekkdmdmdm3e
This document provides instructions for disassembling the travel motor on 336F and 336F L excavator models. The 27-step procedure includes removing components like the motor head assembly, piston assemblies, barrel assembly, springs and seals. Tools required include a transmission repair stand, lifting eye assembly, driver group and various bolts, pins and seals. Technicians are advised to mark components for reinstallation and take care when removing parts to avoid damage.
Caterpillar Cat 336D2 and 336D2 L Excavator (Prefix XBH) Service Repair Manua...fskekkdmdmdm3e
The document provides instructions for installing a swivel on an excavator. It describes using lifting devices and tools to position the swivel. O-rings and seals are installed on the swivel housing and rotor before assembling them together. Bolts are used to secure the parts and the swivel is tested for leaks by applying air pressure. Finally, hoses and fittings are reconnected to complete the installation.
Caterpillar Cat 345D L Excavator (Prefix JKN) Service Repair Manual Instant D...fskekkdmdmdm3e
This document provides instructions for installing a travel motor on an excavator. It lists the required tools and parts. The procedure has 33 steps that include installing seals, spacers, pistons, plates, bearings and other components into the travel motor housing and barrel. Measurements are taken throughout to ensure proper assembly. The travel motor is then installed on the excavator and filled with the correct oil type.
Caterpillar Cat 336E L Excavator (Prefix FJH) Service Repair Manual Instant D...fskekkdmdmdm3e
The document provides instructions for disassembling and assembling a travel motor. It details 27 steps for assembling the travel motor that include installing seals, springs, pistons, and other components in the proper order and orientation. Thirteen steps are listed for disassembling the final drive, which include removing the cover, gears, and planetary gear assembly. Personal injury warnings are provided and all components must be cleaned before assembly.
Caterpillar Cat 336E L Excavator (Prefix BZY) Service Repair Manual Instant D...fskekkdmdmdm3e
This document provides instructions for disassembling and assembling the travel motor of a 336E L excavator. The disassembly procedure involves removing 27 individual parts from the travel motor in a specific sequence using various tools. The assembly procedure instructs assembling the travel motor in the reverse order, noting proper lubrication and torque specifications for reinstalling parts. Special care must be taken when handling springs or parts under spring force to avoid injury.
Caterpillar Cat 330F and 330F L Excavator (Prefix LCG) Service Repair Manual ...fskekkdmdmdm3e
This document provides instructions for disassembling and assembling a final drive on an excavator model 330F. It describes 37 steps to disassemble the final drive by removing gears, shafts, housings, seals and other components. It then describes 34 steps to reassemble the final drive, including pressing in new bearings, installing seals, adjusting bearing preload with shims, and applying threadlocker to bolts. Precise tools and lifting devices are required due to the heavy weights of up to 550 kg involved.
Caterpillar Cat 336E L Excavator (Prefix DPX) Service Repair Manual Instant D...fskekkdmdmdm3e
This document provides instructions for disassembling and assembling the travel motor on a 336E L excavator. The disassembly process involves removing 27 individual parts from the travel motor in a specific sequence using various tools. The assembly process reverses the disassembly steps and provides additional details on lubricating parts and ensuring proper alignment of components.
Caterpillar Cat 336D2 L Excavator (Prefix GJA) Service Repair Manual Instant ...fskekkdmdmdm3e
1) The document provides step-by-step instructions for disassembling the travel motor of a 336D2L excavator.
2) It describes removing over 30 components of the travel motor including the motor head assembly, piston assemblies, barrel assembly, springs, seals, plates and more.
3) Detailed illustrations are provided to accompany each step showing how to remove each component using the recommended tools.
More Related Content
Similar to Caterpillar Cat 313D Excavator (Prefix KXD) Service Repair Manual Instant Download.pdf
Caterpillar cat 312 d excavator (prefix dlp) service repair manual (dlp00001 ...cdfzxs
This document provides instructions for disassembling the final drive, travel motor, and counterbalance valve of a 312D excavator. It lists the required tools and gives step-by-step procedures to remove components such as sprockets, fittings, valves, springs, seals, and plates. Safety notices are included to warn of potential injuries from pressurized fluids, heavy parts, and released spring forces during disassembly.
1) The document provides disassembly instructions for components of a 312D excavator, including the final drive, travel motor, counterbalance valve, and other systems.
2) Detailed steps are given to remove parts like sprockets, valves, pistons, gears, plates and seals. Special tools are listed.
3) Safety precautions are provided, warning of heavy parts, pressurized fluids, and springs that could cause injury if not properly released. Care must be taken to contain fluids and release pressures safely.
This document provides instructions for disassembling the final drive, travel motor, and counterbalance valve of a 312D excavator. It lists the required tools and outlines 20 steps to disassemble parts like the traction control valve, bearing, relief valve assemblies, piston assemblies, barrel assembly, and more. Safety notices are included to warn of potential injuries from parts propelled by springs or pressurized hydraulic fluid.
Caterpillar Cat 312D L Excavator (Prefix TGY) Service Repair Manual Instant D...fijsekkdmdm2w
This document provides instructions for disassembling components of a 312D L excavator, including the final drive, travel motor, counterbalance valve, and travel motor. It lists required tools and outlines multi-step procedures for removing parts like sprockets, valves, pistons, springs, and plates. Safety notices warn of risks like fluid pressure, heavy component weights, and released spring forces during disassembly.
Caterpillar Cat 312D L Excavator (Prefix TGY) Service Repair Manual Instant D...zan2736ban
This document provides disassembly instructions for the final drive and travel motor of a 312D L excavator. It describes removing over 50 individual parts in multiple steps. Key parts that must be removed include the final drive, travel motor, sprockets, valves, gears, seals, plates, pistons, springs and other components. Technicians are warned to take safety precautions when disassembling parts under pressure from springs or that could otherwise cause injury. Detailed illustrations are provided to accompany each step.
Caterpillar cat 312 d l excavator (prefix tgy) service repair manual (tgy0000...ikdkdmddm
This document provides disassembly instructions for the final drive and travel motor of a 312D L excavator. It describes removing over 50 individual parts in multiple steps. Key parts that must be removed include the final drive, travel motor, sprockets, valves, gears, seals, plates, pistons, springs and other components. Technicians are warned to take safety precautions when disassembling parts under pressure from springs or that could otherwise cause injury. Marking components is recommended to aid reassembly.
Caterpillar Cat 312D L Excavator (Prefix TGY) Service Repair Manual (TGY00001...fusjekkdmdmd2w
This document provides instructions for disassembling components of a 312D L excavator, including the final drive, travel motor, counterbalance valve, and travel motor. It lists required tools and outlines multi-step procedures for removing parts like sprockets, valves, pistons, springs, and plates. Safety notices warn of risks like fluid pressure, heavy component weights, and released spring forces during disassembly.
Caterpillar Cat 312D L Excavator (Prefix TGY) Service Repair Manual (TGY00001...f8usejkddmmd
This document provides disassembly instructions for the final drive and travel motor of a 312D L excavator. It describes removing over 50 individual parts in multiple steps. Key parts that must be removed include the final drive, travel motor, sprockets, valves, pistons, gears, seals, and various fasteners. Technicians are warned to take safety precautions when compressing springs and to keep parts in their original positions for reassembly.
Caterpillar cat 312 d l excavator (prefix tgy) service repair manual (tgy0000...fhjsjkdmemm
This document provides disassembly instructions for the final drive, travel motor, and related components of a 312D L excavator. It lists required tools and outlines over 30 steps to disassemble parts like the final drive, traction control valve, counterbalance valve, travel motor barrel assembly, and planetary gearing. Safety notices are included to warn of potential injuries from parts propelled by springs or pressurized hydraulic oil.
Caterpillar Cat 312D L Excavator (Prefix TGY) Service Repair Manual (TGY00001...8ufjsekddm8u
This document provides instructions for disassembling components of a 312D L excavator, including the final drive, travel motor, counterbalance valve, and travel motor. It lists required tools and outlines multi-step procedures for removing parts like sprockets, valves, pistons, springs, and plates. Safety notices warn of risks like fluid pressure, heavy component weights, and released spring forces during the disassembly process.
Similar to Caterpillar Cat 313D Excavator (Prefix KXD) Service Repair Manual Instant Download.pdf (10)
The document provides instructions for disassembling and assembling a swivel and swing motor on an excavator. Key steps include:
1. Removing bolts, seals and components to separate the swivel housing, rotor and cover.
2. Applying clean oil before reassembling components and installing seals, retainer and cover.
3. Draining swing motor oil before disconnecting hoses and removing bolts to detach the motor.
4. Dismantling the swing motor involves removing valves, seals, springs and using tools to separate individual parts like pistons, plates and barrels.
Caterpillar Cat 336D2 and 336D2 L Excavator (Prefix YCF) Service Repair Manua...fskekkdmdmdm3e
The document provides instructions for disassembling and assembling a piston pump. It outlines 30 steps for assembly, beginning with installing various bearings, seals, pistons, springs and other components in the proper order. Disassembly instructions describe 8 steps, including removing the head, port plate, bearings, pistons, pins and other parts. Safety warnings are provided to prevent injury from spring forces.
Caterpillar Cat 312D L Excavator (Prefix XGK) Service Repair Manual Instant D...fskekkdmdmdm3e
- The document provides instructions for removing and installing the idler gear of the front gear group on a C4.2 engine for Caterpillar built machines.
- To remove the idler gear, the front housing must first be removed. Then the idler gear bolt, thrust plate, and idler gear can be taken off the idler gear shaft. An idler shaft puller and driver group may be needed.
- To install the idler gear, first press in a new bushing if needed. Then install the idler shaft, idler gear, thrust plate, washer and idler gear bolt. Tighten the bolt to the specified torque.
Caterpillar Cat 336D L Excavator (Prefix J6D) Service Repair Manual Instant D...fskekkdmdmdm3e
This document provides instructions for disassembling and assembling the final drive of a 336D L Mobile Hydraulic Power Unit. The 25 step disassembly process removes components like housing, gears, seals and bearings. The 22 step assembly process reverses this to rebuild the final drive, applying loctite and torquing bolts to specification. Tools required include link brackets, crossblocks, drivers and torque wrenches. Safety precautions are noted for releasing spring forces.
Caterpillar Cat 336F and 336F L Excavator (Prefix DSW) Service Repair Manual ...fskekkdmdmdm3e
This document provides instructions for disassembling the travel motor on 336F and 336F L excavator models. The 27-step procedure includes removing components like the motor head assembly, piston assemblies, barrel assembly, springs and seals. Tools required include a transmission repair stand, lifting eye assembly, driver group and various bolts, pins and seals. Technicians are advised to mark components for reinstallation and take care when removing parts to avoid damage.
Caterpillar Cat 336D2 and 336D2 L Excavator (Prefix XBH) Service Repair Manua...fskekkdmdmdm3e
The document provides instructions for installing a swivel on an excavator. It describes using lifting devices and tools to position the swivel. O-rings and seals are installed on the swivel housing and rotor before assembling them together. Bolts are used to secure the parts and the swivel is tested for leaks by applying air pressure. Finally, hoses and fittings are reconnected to complete the installation.
Caterpillar Cat 345D L Excavator (Prefix JKN) Service Repair Manual Instant D...fskekkdmdmdm3e
This document provides instructions for installing a travel motor on an excavator. It lists the required tools and parts. The procedure has 33 steps that include installing seals, spacers, pistons, plates, bearings and other components into the travel motor housing and barrel. Measurements are taken throughout to ensure proper assembly. The travel motor is then installed on the excavator and filled with the correct oil type.
Caterpillar Cat 336E L Excavator (Prefix FJH) Service Repair Manual Instant D...fskekkdmdmdm3e
The document provides instructions for disassembling and assembling a travel motor. It details 27 steps for assembling the travel motor that include installing seals, springs, pistons, and other components in the proper order and orientation. Thirteen steps are listed for disassembling the final drive, which include removing the cover, gears, and planetary gear assembly. Personal injury warnings are provided and all components must be cleaned before assembly.
Caterpillar Cat 336E L Excavator (Prefix BZY) Service Repair Manual Instant D...fskekkdmdmdm3e
This document provides instructions for disassembling and assembling the travel motor of a 336E L excavator. The disassembly procedure involves removing 27 individual parts from the travel motor in a specific sequence using various tools. The assembly procedure instructs assembling the travel motor in the reverse order, noting proper lubrication and torque specifications for reinstalling parts. Special care must be taken when handling springs or parts under spring force to avoid injury.
Caterpillar Cat 330F and 330F L Excavator (Prefix LCG) Service Repair Manual ...fskekkdmdmdm3e
This document provides instructions for disassembling and assembling a final drive on an excavator model 330F. It describes 37 steps to disassemble the final drive by removing gears, shafts, housings, seals and other components. It then describes 34 steps to reassemble the final drive, including pressing in new bearings, installing seals, adjusting bearing preload with shims, and applying threadlocker to bolts. Precise tools and lifting devices are required due to the heavy weights of up to 550 kg involved.
Caterpillar Cat 336E L Excavator (Prefix DPX) Service Repair Manual Instant D...fskekkdmdmdm3e
This document provides instructions for disassembling and assembling the travel motor on a 336E L excavator. The disassembly process involves removing 27 individual parts from the travel motor in a specific sequence using various tools. The assembly process reverses the disassembly steps and provides additional details on lubricating parts and ensuring proper alignment of components.
Caterpillar Cat 336D2 L Excavator (Prefix GJA) Service Repair Manual Instant ...fskekkdmdmdm3e
1) The document provides step-by-step instructions for disassembling the travel motor of a 336D2L excavator.
2) It describes removing over 30 components of the travel motor including the motor head assembly, piston assemblies, barrel assembly, springs, seals, plates and more.
3) Detailed illustrations are provided to accompany each step showing how to remove each component using the recommended tools.
Caterpillar Cat 336D L Excavator (Prefix J2F) Service Repair Manual Instant D...fskekkdmdmdm3e
The document provides instructions for removing and installing the final drive and travel motor on a 336D L excavator. It describes 13 steps to remove the component, which include disconnecting hoses, removing bolts and brackets, and lifting the final drive and travel motor assembly out. 11 steps are listed to install the component, in reverse order, including attaching lifting devices, positioning the assembly, and reinstalling hoses and covers. Tools and torque specifications are provided.
Caterpillar Cat 325C and 325C L Excavator (Prefix JLD) Service Repair Manual ...fskekkdmdmdm3e
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and install components like gears, carriers, seals, and housings. Cleanliness is emphasized and O-rings, gaskets, and seals should always be replaced. The assembly procedure is the reverse of the disassembly with notes to apply lubricants and check parts for wear.
Caterpillar Cat 325C and 325C L Excavator (Prefix JLC) Service Repair Manual ...fskekkdmdmdm3e
The document provides instructions for removing and installing a crankshaft wear sleeve and crankshaft gear on a 325C excavator. It describes using various tools to distort and remove the existing wear sleeve and instructions for installing a new sleeve using a multi-piece installer tool. It also outlines steps for removing the crankshaft gear using a bearing puller and installing the gear by heating it and pressing it onto the crankshaft. The document provides maintenance technicians with detailed parts and tool information as well as safety notices for completing these tasks.
Caterpillar Cat 345D L Excavator (Prefix MLK) Service Repair Manual Instant D...fskekkdmdmdm3e
This document provides instructions for assembling and installing a travel motor. It outlines 34 steps for assembling components like pistons, seals, plates, and bearings. It also describes using tools to measure clearances and distances during assembly. Finally, it details installing the assembled travel motor using lifting devices and bolts, and connecting hydraulic hose assemblies.
Caterpillar Cat 345D L Excavator (Prefix KFH) Service Repair Manual Instant D...fskekkdmdmdm3e
This document provides instructions for removing and installing the rear gear group and rear crankshaft seal of a C13 engine. The removal procedure involves 11 steps including removing bolts, gears, seals, and bearings. The installation procedure involves 12 steps including cleaning parts, installing bearings, seals, gears, and bolts while ensuring proper dimensions and torque specifications are followed. Tools required include drivers, link brackets, guide studs, and installation tools.
This document provides instructions for removing and installing a camshaft on a Caterpillar 3306B engine. It describes:
1) Marking the gears to ensure proper timing during removal and installation.
2) Removing the camshaft bolts and carefully removing the camshaft.
3) Cleaning and lubricating the camshaft lobes and bearings before installation.
4) Aligning the timing marks and installing the camshaft bolts to complete the process.
The document provides instructions for removing and installing various components of a Caterpillar 621E wheel scraper, including:
1) Removing and installing the push-pull plate that connects the push-pull spring to the support assembly.
2) Disassembling and assembling the push-pull spring itself by removing discs and plates.
3) A detailed process for removing and installing the ejector cylinder, which requires the use of lifting tools and wood blocks due to the cylinder's weight.
4) Brief instructions for removing and adjusting the position of the lower front and guide rollers on the ejector assembly.
This document provides assembly instructions for a final drive on an excavator. It involves assembling and installing several components in the following order: installing bearings and determining shim thickness; installing seals; installing dowel pins; installing the housing on the motor housing; installing coupling gear, bolts, and ring gear; assembling carrier assemblies; installing gears, shafts, and retaining rings; installing the cover and testing for leaks. The process requires precision measurements and uses several specialized tools to properly assemble the final drive.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 313D EXCAVATOR KXD
Configuration: 313D Excavator KXD00001-UP (MACHINE) POWERED BY C4.2 Engine
Disassembly and Assembly
312D and 313D Excavators Machine Systems
Media Number -KENR6402-05 Publication Date -01/01/2012 Date Updated -17/01/2012
i04126149
Final Drive and Travel Motor - Disassemble
SMCS - 4050-015; 4351-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 3
B 1P-2420 Transmission Repair Stand 1
C 8T-6699 Bolts 2
D
1P-0074 Slide Hammer Puller Gp 1
4C-5666 Threaded Adapter 1
123-6702 Backlash Gauge Gp 1
E 1P-0510 Driver Gp 1
F 8H-0663 Bearing Puller Gp 1
G 1P-1863 Retaining Ring Pliers 1
H 9U-7346 Spanner Wrench As 1
Start By:
a. Remove the final drive and the travel motor. Refer to Disassembly and Assembly Manual ,
"Final Drive and Travel Motor - Remove".
NOTICE
1/23
313D Excavator KXD00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP621...
2020/5/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
1. Thoroughly clean the outside of the final drive and travel motor prior to disassembly.
2. Remove the sprocket from the final drive and the travel motor. The weight of the sprocket is
approximately 39 kg (85 lb).
3. Mark the alignment of the final drive and travel motor for reassembly purposes. The parts
must be reinstalled in the original locations.
2/23
313D Excavator KXD00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP621...
2020/5/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 1 g00940682
4. Use Tooling (A) and a suitable lifting device to position the final drive and the travel motor
onto Tooling (B). The combined weight of the final drive and travel motor is approximately
170 kg (375 lb).
5. Drain the oil from the final drive into a suitable container for storage or for disposal. Refer
to Operation and Maintenance Manual, "Capacities (Refill)" for the capacity of the final
drive.
6. Remove fittings (1). Remove fittings (2) from traction control valve (3).
7. Remove nine bolts (4) that secure traction control valve (3) to the final drive.
8. Use two persons to remove traction control valve (3) from the final drive. The weight of
travel brake valve (3) is approximately 27 kg (60 lb).
3/23
313D Excavator KXD00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP621...
2020/5/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 2 g00940716
9. Remove valve plate (5) and O-ring seal (6).
Illustration 3 g01405139
10. Use Tooling (D) to remove bearing (7).
Disassembly of the Counterbalance Valve
Illustration 4 g01405725
4/23
313D Excavator KXD00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP621...
2020/5/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 5 g01405227
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
1. Position the counterbalance valve, as shown. Remove plug (8) and adapter (9).
2. Remove spring (10) and spool (11).
Illustration 6 g01405232
5/23
313D Excavator KXD00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP621...
2020/5/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. 3. Remove relief valve assemblies (12).
Illustration 7 g01405243
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
4. Remove seat (13). Seat (13) is pressed onto valve (17). Use new parts if seat (13) or valve
(17) is damaged. Do not disassemble these components. Make sure that you reuse the other
component.
5. Remove backup ring (14) and O-ring seal (15).
6. Remove O-ring seal (22).
7. Remove nut (20).
8. Remove screw (27).
9. Remove stopper (26). Remove backup ring (19) and O-ring seal (18) from stopper (19).
10. Remove valve (21), piston (25), and spring (16) from the housing.
11. Remove backup ring (23) and O-ring seal (24) from piston (25).
6/23
313D Excavator KXD00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP621...
2020/5/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 8 g01405284
Illustration 9 g01405299
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
12. Remove covers (28) and the O-ring seals.
13. Remove springs (29), guides (30), and spool assembly (31).
7/23
313D Excavator KXD00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP621...
2020/5/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 10 g01405345
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
14. Remove valve (32), spring (33), and ball (34) from one end of spool (35). Repeat for the
other end of spool (35).
Illustration 11 g01405633
8/23
313D Excavator KXD00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP621...
2020/5/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
15. Remove plug (36), spring (38), and piston (39) from both sides of the housing assembly.
16. Remove O-ring seal (37) from each plug (36).
Note: Remove the remaining allen head bolts from the housing assembly for cleaning
purposes, if necessary. Each allen head bolt has an O-ring seal. Check the O-ring seal for
wear or for damage. Replace the O-ring seal, if necessary.
Disassembly of the Travel Motor
Illustration 12 g01405794
1. Remove O-ring seal (40) and springs (41).
9/23
313D Excavator KXD00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP621...
2020/5/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 13 g01405828
2. Install Tooling (C) onto piston assembly (42). Use Tooling (C) and a suitable prybar to
remove piston assembly (42) from body (43).
Illustration 14 g01405855
3. Remove O-ring seals (45) and (46) from piston assembly (42). Remove backup rings (44)
and (47) from piston assembly (42).
10/23
313D Excavator KXD00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP6...
2020/5/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 15 g01405867
4. Use suitable drivers or a suitable lever to remove guide assembly (48).
Illustration 16 g01405885
5. Remove O-ring seal (49) and backup ring (50) from guide assembly (48).
11/23
313D Excavator KXD00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP6...
2020/5/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 17 g01406117
6. Remove four separator plates (51) and four friction plates (52). Note the alternating order of
separator plates (51) and friction plates (52) for assembly purposes.
Note: Do not allow the components of barrel assembly (53) to come apart while you
remove barrel assembly (53). The components of barrel assembly (53) must be reinstalled
into the original positions.
Note: Oil will drain from the final drive. Place a suitable container under the final drive for
storage or disposal. Refer to Operation and Maintenance Manual, "Capacities (Refill)" for
the fluid capacity of the final drive.
7. Position the final drive horizontally.
8. Remove barrel assembly (53).
12/23
313D Excavator KXD00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP6...
2020/5/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 18 g01406180
Note: Mark the component locations for assembly purposes before you disassemble barrel
assembly (53).
9. Remove piston assemblies (54) and retainer (55) from barrel assembly (53).
Illustration 19 g01406210
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
10. Remove retainer (56), spacer (57), and springs (58) from barrel assembly (53).
13/23
313D Excavator KXD00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP6...
2020/5/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 20 g01406263
11. Put location marks on cam plate (59) for assembly purposes. Make sure that the thick end of
cam plate (59) is adjacent to the opening that is across body (43). Remove cam plate (59).
Illustration 21 g01406329
Illustration 22 g01406338
14/23
313D Excavator KXD00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP6...
2020/5/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
12. Remove piston (60) and spring (62).
13. Remove key (61).
Disassembly of the Final Drive
Illustration 23 g01406376
1. Use a suitable lifting device to position the final drive on Tooling (B), as shown. The weight
of the final drive is approximately 200 kg (441 lb).
2. Remove plugs (63). Remove the O-ring seals from plugs (63). Check the O-ring seals for
wear or for damage. Replace the O-ring seals, if necessary.
3. Remove bolts (65). Remove cover (64).
15/23
313D Excavator KXD00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP6...
2020/5/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 24 g01406386
4. Raise the temperature of bolts (66) in order to loosen the thread sealant.
5. Remove bolts (66) and plate (67).
Illustration 25 g01406397
6. Remove sun gear (68).
16/23
313D Excavator KXD00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP6...
2020/5/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 26 g01406400
7. Attach Tooling (A) and a suitable lifting device to carrier assembly (69). Remove carrier
assembly (69), planetary gear assembly (70), and bearing assembly (71) as a unit.
Illustration 27 g01406789
8. Remove planetary gear (70) and bearing assembly (71) from carrier assembly (69). Remove
the remaining planetary gears (70) and bearings (71).
Illustration 28 g01406822
9. Remove sun gear (72).
17/23
313D Excavator KXD00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP6...
2020/5/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. 10. Raise the temperature of bolts (73) in order to loosen the thread sealant. Remove bolts (73).
Remove plate (74).
Illustration 29 g01406850
11. Remove retaining ring (75) from sun gear (72). Check retaining ring (75) for wear or for
damage. Replace retaining ring (75), if necessary.
Illustration 30 g01406853
12. Remove planetary gear (76).
18/23
313D Excavator KXD00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP6...
2020/5/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 31 g01406875
13. Remove bearing (77), race (78), and thrust washer (79).
14. Repeat Steps 12 and 13 in order to remove the remaining planetary gear assemblies.
Illustration 32 g01406882
15. Remove bolt (80) and plate (81).
19/23
313D Excavator KXD00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP6...
2020/5/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 33 g01406885
Illustration 34 g01406886
16. Use Tooling (H) to remove nut (82).
Illustration 35 g01406906
17. Install Tooling (A) and a suitable lifting device to housing (83). The weight of housing (83)
is approximately 35 kg (77 lb).
18. Remove housing (83) from body assembly (84).
20/23
313D Excavator KXD00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP6...
2020/5/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 36 g01406912
19. Remove Duo-Cone Seal Gp seal (85) from the body assembly. Remove the Duo-Cone Seal
Gp seal from the housing.
Illustration 37 g01407100
20. Remove both bearings (86) from housing (83).
21/23
313D Excavator KXD00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP6...
2020/5/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 38 g01407089
21. Remove both bearings (87) from housing (83).
Illustration 39 g01407115
22. Position body assembly (84) horizontally. Remove shaft assembly (88), the bearing, and the
retaining ring.
22/23
313D Excavator KXD00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP6...
2020/5/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Illustration 40 g01407144
23. Use Tooling (G) to remove retaining ring (89) from shaft assembly (88).
Illustration 41 g01407161
24. Use Tooling (E), Tooling (F), and a suitable press to remove bearing (90).
Illustration 42 g01407166
25. Remove lip seal (91) from the body assembly.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed May 13 10:48:35 UTC+0800 2020
23/23
313D Excavator KXD00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP6...
2020/5/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 313D EXCAVATOR KXD
Configuration: 313D Excavator KXD00001-UP (MACHINE) POWERED BY C4.2 Engine
Disassembly and Assembly
312D and 313D Excavators Machine Systems
Media Number -KENR6402-05 Publication Date -01/01/2012 Date Updated -17/01/2012
i07269885
Final Drive and Travel Motor - Assemble
SMCS - 4050-016; 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 3
B 1P-2420 Transmission Repair Stand 1
E 1P-0510 Driver Gp 1
F 8H-0663 Bearing Puller Gp 1
G 1P-1863 Retaining Ring Pliers 1
H 9U-7346 Spanner Wrench As 1
K 1U-7558 Mounting Adapter Gp(1)
1
L - Loctite 271 -
M - Loctite High Flex GM -
N 169-0503 Installation Kit 1
P 1U-6434 Duo-Cone Seal Installer As 1
Q 4C-3761 C-Clamp 2
R FT-2766 Rolling Torque Bar 1
S - Loctite 272 -
(1)
1/24
313D Excavator KXD00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP621...
2020/5/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. The bent plates for the mounting adapter may be modified so that the mounting adapter can be assembled to the
housing.
Assembly Procedure for the Final Drive
Illustration 1 g01407166
1. Use Tooling (E) to install lip seal (91) into the body assembly.
Illustration 2 g01407561
2. Use Tooling (E), Tooling (F), and a suitable press to install bearing assembly (90) onto shaft
assembly (88).
2/24
313D Excavator KXD00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP621...
2020/5/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
28. Illustration 3 g01407144
3. Use Tooling (G) to install retaining ring (89) on shaft assembly (88).
Illustration 4 g01407580
4. Use a suitable soft faced hammer to install shaft assembly (88) into body assembly (84).
Illustration 5 g01407608
3/24
313D Excavator KXD00001-UP (MACHINE) POWERED BY C4.2 Engine(SEBP621...
2020/5/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...