This document provides instructions for disassembling various components of a 311D LRR Excavator, including the final drive, travel motor, counterbalance valve, and traction control valve. The summary steps are:
1. Drain fluids and remove external components like sprockets and covers
2. Disassemble internal components of the final drive, travel motor, valves, and other systems using the specified tools
3. Remove seals, plates, gears, and other individual parts, noting their positions for reassembly
Caterpillar cat 313 d excavator (prefix kxd) service repair manual (kxd00001 ...fjskekdmjekm
This document provides instructions for disassembling various components of a 313D excavator, including the final drive, travel motor, counterbalance valve, and travel motor. It lists the required tools and outlines 16 steps to disassemble parts like the sprockets, valves, pistons, plates, springs, and seals. Safety notices are included to warn of potential injuries from fluids, pressures, and released spring forces when handling or disassembling parts.
Caterpillar cat 314 d lcr excavator (prefix ssz) service repair manual (ssz00...fjskekdmjekm
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 314D LCR excavator. It lists required tools and outlines 16 steps for disassembling the components, including draining fluids, removing fittings and valves, using pullers to remove bearings, and noting part orientations for reassembly. Safety notices are included to warn of potential injuries from pressurized fluids, heavy parts, and released spring forces.
Caterpillar cat 312 d2 l excavator (prefix fab) service repair manual (fab000...fjjsekmmm
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 312D2 L excavator. It lists the required tools and outlines 16 steps to disassemble the final drive, including removing covers, gears, and bearings. It also outlines 13 steps to disassemble the travel motor, such as removing piston assemblies, seals, and plates. Additionally, it provides 15 steps to disassemble the counterbalance valve, including removing springs, spools, and relief valve assemblies. Personal injury warnings are included throughout.
Caterpillar cat 312 d l excavator (prefix tgy) service repair manual (tgy0000...pfiskdmjekm
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 312D L excavator. It lists the required tools and outlines 16 steps to disassemble the components, including draining fluids, removing covers, plates, seals, springs, and other parts. Safety notices are included to warn technicians about potential injuries from parts propelled by springs or pressurized hydraulic fluids.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 312D2 GC excavator. It lists the required tools and parts and provides step-by-step instructions and illustrations for disassembling each component. Personal safety notices are included throughout to warn technicians of potential hazards like parts propelled by springs or releasing hydraulic pressure. The document is intended to guide technicians in properly disassembling these systems for repair or replacement of parts.
Caterpillar cat 315 f l excavator (prefix tdy) service repair manual (tdy0000...fjskekdmjekm
This document provides disassembly instructions for the final drive and travel motor of a 315F LCR excavator. It outlines 14 steps to disassemble the final drive which includes removing covers, gears, bearings, and other components. It also details 23 steps to disassemble the travel motor, counterbalance valve, and other internal parts. Safety precautions are provided throughout to warn of potential hazards like released spring forces during disassembly.
Caterpillar cat 314 d lcr excavator (prefix byj) service repair manual (byj00...soeldksejdksem
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 314D CR and 314D LCR excavator. It lists 17 required tools and gives detailed step-by-step instructions to disassemble each component. Some key steps include draining fluids, removing covers and plates, using pullers to remove bearings, and noting part locations for reassembly. Safety notices are provided regarding releasing pressures and springs.
Caterpillar cat 312 d excavator (prefix dlp) service repair manual (dlp00001 ...fksjksmmde
This document provides instructions for disassembling various components of a 312D excavator, including the final drive, travel motor, counterbalance valve, and travel motor. It lists the required tools and outlines 16 detailed steps to disassemble parts like the traction control valve, barrel assembly, piston assemblies, springs and seals. Safety notices are included to warn of potential injuries from parts or fluids.
Caterpillar cat 313 d excavator (prefix kxd) service repair manual (kxd00001 ...fjskekdmjekm
This document provides instructions for disassembling various components of a 313D excavator, including the final drive, travel motor, counterbalance valve, and travel motor. It lists the required tools and outlines 16 steps to disassemble parts like the sprockets, valves, pistons, plates, springs, and seals. Safety notices are included to warn of potential injuries from fluids, pressures, and released spring forces when handling or disassembling parts.
Caterpillar cat 314 d lcr excavator (prefix ssz) service repair manual (ssz00...fjskekdmjekm
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 314D LCR excavator. It lists required tools and outlines 16 steps for disassembling the components, including draining fluids, removing fittings and valves, using pullers to remove bearings, and noting part orientations for reassembly. Safety notices are included to warn of potential injuries from pressurized fluids, heavy parts, and released spring forces.
Caterpillar cat 312 d2 l excavator (prefix fab) service repair manual (fab000...fjjsekmmm
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 312D2 L excavator. It lists the required tools and outlines 16 steps to disassemble the final drive, including removing covers, gears, and bearings. It also outlines 13 steps to disassemble the travel motor, such as removing piston assemblies, seals, and plates. Additionally, it provides 15 steps to disassemble the counterbalance valve, including removing springs, spools, and relief valve assemblies. Personal injury warnings are included throughout.
Caterpillar cat 312 d l excavator (prefix tgy) service repair manual (tgy0000...pfiskdmjekm
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 312D L excavator. It lists the required tools and outlines 16 steps to disassemble the components, including draining fluids, removing covers, plates, seals, springs, and other parts. Safety notices are included to warn technicians about potential injuries from parts propelled by springs or pressurized hydraulic fluids.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 312D2 GC excavator. It lists the required tools and parts and provides step-by-step instructions and illustrations for disassembling each component. Personal safety notices are included throughout to warn technicians of potential hazards like parts propelled by springs or releasing hydraulic pressure. The document is intended to guide technicians in properly disassembling these systems for repair or replacement of parts.
Caterpillar cat 315 f l excavator (prefix tdy) service repair manual (tdy0000...fjskekdmjekm
This document provides disassembly instructions for the final drive and travel motor of a 315F LCR excavator. It outlines 14 steps to disassemble the final drive which includes removing covers, gears, bearings, and other components. It also details 23 steps to disassemble the travel motor, counterbalance valve, and other internal parts. Safety precautions are provided throughout to warn of potential hazards like released spring forces during disassembly.
Caterpillar cat 314 d lcr excavator (prefix byj) service repair manual (byj00...soeldksejdksem
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 314D CR and 314D LCR excavator. It lists 17 required tools and gives detailed step-by-step instructions to disassemble each component. Some key steps include draining fluids, removing covers and plates, using pullers to remove bearings, and noting part locations for reassembly. Safety notices are provided regarding releasing pressures and springs.
Caterpillar cat 312 d excavator (prefix dlp) service repair manual (dlp00001 ...fksjksmmde
This document provides instructions for disassembling various components of a 312D excavator, including the final drive, travel motor, counterbalance valve, and travel motor. It lists the required tools and outlines 16 detailed steps to disassemble parts like the traction control valve, barrel assembly, piston assemblies, springs and seals. Safety notices are included to warn of potential injuries from parts or fluids.
1) The document provides disassembly instructions for a 314D LCR excavator final drive and travel motor. It describes removing various components such as sprockets, valves, gears, plates, and motors.
2) Detailed steps are given to disassemble the final drive, travel motor, counterbalance valve, and traction control valve. Components are to be marked for reassembly and cleaned.
3) Required tools include link brackets, a transmission repair stand, bolts, pullers, pliers, and wrenches. Safety precautions are provided to relieve pressures and contain fluids.
The document is a service repair manual that provides disassembly instructions for a 314D LCR excavator final drive, travel motor, and counterbalance valve. It lists required tools and outlines 16 steps to disassemble the final drive components, 10 steps to disassemble the counterbalance valve, and 9 steps to disassemble the travel motor. Personal injury warnings are provided throughout regarding hydraulic pressure, heavy components, and released spring forces.
Caterpillar cat 314 d lcr excavator (prefix ssz) service repair manual (ssz00...ikdkkdmdmdm
The document is a service repair manual that provides disassembly instructions for a 314D LCR excavator final drive, travel motor, and counterbalance valve. It lists required tools and safety notices, then outlines 16 steps to disassemble the final drive components, 10 steps to disassemble the counterbalance valve, and 9 steps to disassemble the travel motor. Personal injury warnings are provided throughout for springs that could be propelled by released spring forces.
Caterpillar cat 314 d lcr excavator (prefix ssz) service repair manual (ssz00...fjjskejdmdn
The document provides disassembly instructions for a 314D LCR excavator final drive and travel motor. It lists required tools and outlines 23 steps to disassemble components like the final drive, travel motor, counterbalance valve, and traction control valve. Personal injury warnings are included to remind technicians to release pressures and springs safely. Detailed illustrations accompany each step to ensure correct reassembly.
1) The document provides disassembly instructions for a 314D LCR excavator final drive and travel motor. It describes removing various components such as sprockets, valves, gears, plates, and motors.
2) Detailed steps are given to disassemble the final drive, travel motor, counterbalance valve, and traction control valve. Components are to be marked for reassembly and cleaned.
3) Required tools include link brackets, a transmission repair stand, bolts, pullers, pliers, and wrenches. Safety precautions are provided to relieve pressures and contain fluids.
1) The document provides disassembly instructions for a 314D LCR excavator final drive and travel motor. It describes removing various components such as sprockets, valves, gears, plates, and motors.
2) Detailed steps are given to disassemble the final drive, travel motor, counterbalance valve, and traction control valve. Components are to be marked for reassembly and cleaned.
3) Required tools include link brackets, a transmission repair stand, bolts, pullers, pliers, and wrenches. Safety precautions are provided to relieve pressures and contain fluids.
1) The document provides disassembly instructions for a 314D LCR excavator final drive and travel motor. It describes removing various components such as sprockets, valves, gears, plates, and motors.
2) Detailed steps are given to disassemble the final drive, travel motor, counterbalance valve, and traction control valve. Components are to be marked for reassembly and cleaned.
3) Required tools include link brackets, a transmission repair stand, bolts, pullers, pliers, and wrenches. Safety precautions are provided to relieve pressures and contain fluids.
Caterpillar cat 313 d excavator (prefix kxd) service repair manual (kxd00001 ...ifosodkmsme
This document provides instructions for disassembling various components of a 313D excavator, including the final drive, travel motor, counterbalance valve, and traction control valve. It lists over 30 detailed steps for disassembling each component, and identifies required tools. Safety notices are included throughout to warn of potential injuries from parts propelled by springs or pressurized fluids.
Caterpillar cat 314 d lcr excavator (prefix ssz) service repair manual (ssz00...ifosodkmsme
The document provides disassembly instructions for the final drive, travel motor, and hydraulic components of a 314D LCR excavator. It lists over 30 detailed steps to disassemble the various parts, including removing covers, plates, gears, pistons, seals, and other components. Safety notices are included to warn of potential injuries from parts propelled by springs or pressurized hydraulic fluid. Required tools are listed for the disassembly process.
1) The document provides disassembly instructions for components of a 313D excavator including the final drive, travel motor, counterbalance valve, and traction control valve.
2) It lists required tools and outlines over 30 steps to disassemble components such as removing covers, plates, gears, seals, springs, and pistons.
3) Safety precautions are provided, warning of potential injury from parts propelled by springs, hydraulic pressure, and heavy component weight during disassembly.
This document provides instructions for disassembling the final drive, travel motor, and counterbalance valve of a 313D excavator. It lists the required tools and outlines 20 steps to disassemble parts like the sprockets, traction control valve, piston assemblies, barrel assembly, and more. Safety warnings are provided to release pressures and contain fluids before removing any components.
1) The document provides disassembly instructions for components of a 313D excavator including the final drive, travel motor, counterbalance valve, and traction control valve.
2) It lists required tools and safety precautions and provides a step-by-step process to remove each part, noting identification marks and order of components.
3) Detailed illustrations accompany each step to show how to remove components like sprockets, valves, springs, gears, plates, and seals. Proper handling and storage of fluids is also addressed.
This document provides instructions for disassembling the final drive, travel motor, and counterbalance valve of a 313D excavator. It lists the required tools and outlines 20 steps to disassemble the components. These include draining fluids, removing covers, plates, seals, springs, pistons, and other parts. Safety precautions are provided to warn of potential injuries from parts propelled by springs or pressurized hydraulic fluid.
1) The document provides disassembly instructions for components of a 313D excavator including the final drive, travel motor, counterbalance valve, and traction control valve.
2) It lists required tools and outlines over 30 steps to disassemble components such as removing covers, plates, gears, seals, springs, and pistons.
3) Safety precautions are provided, warning of potential injury from parts propelled by springs, hydraulic pressure, and hot oil during disassembly.
This document provides instructions for disassembling the final drive, travel motor, and counterbalance valve of a 313D excavator. It lists the required tools and outlines 20 steps to disassemble the components. Key steps include draining fluids, removing sprockets, valves, seals, springs, pistons, and plates. Safety warnings are provided to release pressures and contain fluids safely.
Caterpillar cat 313 d excavator (prefix kxd) service repair manual (kxd00001 ...ikdkkdmdmdm
This document provides instructions for disassembling the final drive, travel motor, and counterbalance valve of a 313D excavator. It lists the required tools and outlines 20 steps to disassemble the components. Key steps include draining fluids, removing sprockets, valves, seals, springs, pistons, and plates. Safety warnings are provided to be aware of heavy parts, contained fluids, and released spring forces during disassembly.
1) The document provides disassembly instructions for components of a 313D excavator including the final drive, travel motor, counterbalance valve, and traction control valve.
2) It lists required tools and outlines over 30 steps to disassemble components such as removing covers, plates, gears, seals, springs, and pistons.
3) Safety precautions are provided, warning of potential injury from parts propelled by springs, hydraulic pressure, and heavy component weight during disassembly.
This document provides instructions for disassembling the final drive, travel motor, and counterbalance valve of a 313D excavator. It lists the required tools and outlines 20 steps to disassemble the components. Key steps include draining fluids, removing sprockets, valves, seals, springs, pistons, and plates. Safety warnings are provided to release pressures and contain fluids safely.
1) The document provides disassembly instructions for components of a 313D excavator including the final drive, travel motor, counterbalance valve, and traction control valve.
2) It lists required tools and safety precautions and provides a step-by-step process to remove each part, noting identification marks and order of components.
3) Detailed illustrations accompany each step to show how to remove components like sprockets, valves, springs, gears, plates, and seals. Proper handling and storage of fluids is also addressed.
Caterpillar cat 313 d excavator (prefix kxd) service repair manual (kxd00001 ...fjjskejdmdn
This document provides instructions for disassembling the final drive, travel motor, and counterbalance valve of a 313D excavator. It lists the required tools and outlines 20 steps to disassemble the components. Some key points are to drain fluids, mark parts positions, and use care when removing parts with springs or that could be propelled, as personal injury could result.
Kawasaki 85 z7 wheel loader service repair manual (serial no. 85j1 8001 and up)fjskekdmjekm
This document provides specifications and layout diagrams for a wheel loader. It includes:
1. Specifications such as operating weight, tipping load, engine details, and dimensions.
2. Layout diagrams showing the location of major components such as the bucket, lights, engine, radiator, exhaust filter, and hydraulic components.
3. Details of electrical component locations in and around the cab, including switches, controllers, and sensors.
The document provides technical information on the configuration and specifications of a wheel loader to support maintenance and repair work. Diagrams identify key parts and their locations on the machine.
This document is an operation and maintenance manual for a Kawasaki wheel loader model 85Z7. It provides instructions on operating and maintaining the machine safely and properly. The manual covers safety procedures, component identification, controls and displays, operating instructions, maintenance, and specifications. Operators should read the full manual before operating the machine to learn how to use it correctly and avoid injuries or damage.
More Related Content
Similar to Caterpillar cat 311 d lrr excavator (prefix pnj) service repair manual (pnj00001 and up)
1) The document provides disassembly instructions for a 314D LCR excavator final drive and travel motor. It describes removing various components such as sprockets, valves, gears, plates, and motors.
2) Detailed steps are given to disassemble the final drive, travel motor, counterbalance valve, and traction control valve. Components are to be marked for reassembly and cleaned.
3) Required tools include link brackets, a transmission repair stand, bolts, pullers, pliers, and wrenches. Safety precautions are provided to relieve pressures and contain fluids.
The document is a service repair manual that provides disassembly instructions for a 314D LCR excavator final drive, travel motor, and counterbalance valve. It lists required tools and outlines 16 steps to disassemble the final drive components, 10 steps to disassemble the counterbalance valve, and 9 steps to disassemble the travel motor. Personal injury warnings are provided throughout regarding hydraulic pressure, heavy components, and released spring forces.
Caterpillar cat 314 d lcr excavator (prefix ssz) service repair manual (ssz00...ikdkkdmdmdm
The document is a service repair manual that provides disassembly instructions for a 314D LCR excavator final drive, travel motor, and counterbalance valve. It lists required tools and safety notices, then outlines 16 steps to disassemble the final drive components, 10 steps to disassemble the counterbalance valve, and 9 steps to disassemble the travel motor. Personal injury warnings are provided throughout for springs that could be propelled by released spring forces.
Caterpillar cat 314 d lcr excavator (prefix ssz) service repair manual (ssz00...fjjskejdmdn
The document provides disassembly instructions for a 314D LCR excavator final drive and travel motor. It lists required tools and outlines 23 steps to disassemble components like the final drive, travel motor, counterbalance valve, and traction control valve. Personal injury warnings are included to remind technicians to release pressures and springs safely. Detailed illustrations accompany each step to ensure correct reassembly.
1) The document provides disassembly instructions for a 314D LCR excavator final drive and travel motor. It describes removing various components such as sprockets, valves, gears, plates, and motors.
2) Detailed steps are given to disassemble the final drive, travel motor, counterbalance valve, and traction control valve. Components are to be marked for reassembly and cleaned.
3) Required tools include link brackets, a transmission repair stand, bolts, pullers, pliers, and wrenches. Safety precautions are provided to relieve pressures and contain fluids.
1) The document provides disassembly instructions for a 314D LCR excavator final drive and travel motor. It describes removing various components such as sprockets, valves, gears, plates, and motors.
2) Detailed steps are given to disassemble the final drive, travel motor, counterbalance valve, and traction control valve. Components are to be marked for reassembly and cleaned.
3) Required tools include link brackets, a transmission repair stand, bolts, pullers, pliers, and wrenches. Safety precautions are provided to relieve pressures and contain fluids.
1) The document provides disassembly instructions for a 314D LCR excavator final drive and travel motor. It describes removing various components such as sprockets, valves, gears, plates, and motors.
2) Detailed steps are given to disassemble the final drive, travel motor, counterbalance valve, and traction control valve. Components are to be marked for reassembly and cleaned.
3) Required tools include link brackets, a transmission repair stand, bolts, pullers, pliers, and wrenches. Safety precautions are provided to relieve pressures and contain fluids.
Caterpillar cat 313 d excavator (prefix kxd) service repair manual (kxd00001 ...ifosodkmsme
This document provides instructions for disassembling various components of a 313D excavator, including the final drive, travel motor, counterbalance valve, and traction control valve. It lists over 30 detailed steps for disassembling each component, and identifies required tools. Safety notices are included throughout to warn of potential injuries from parts propelled by springs or pressurized fluids.
Caterpillar cat 314 d lcr excavator (prefix ssz) service repair manual (ssz00...ifosodkmsme
The document provides disassembly instructions for the final drive, travel motor, and hydraulic components of a 314D LCR excavator. It lists over 30 detailed steps to disassemble the various parts, including removing covers, plates, gears, pistons, seals, and other components. Safety notices are included to warn of potential injuries from parts propelled by springs or pressurized hydraulic fluid. Required tools are listed for the disassembly process.
1) The document provides disassembly instructions for components of a 313D excavator including the final drive, travel motor, counterbalance valve, and traction control valve.
2) It lists required tools and outlines over 30 steps to disassemble components such as removing covers, plates, gears, seals, springs, and pistons.
3) Safety precautions are provided, warning of potential injury from parts propelled by springs, hydraulic pressure, and heavy component weight during disassembly.
This document provides instructions for disassembling the final drive, travel motor, and counterbalance valve of a 313D excavator. It lists the required tools and outlines 20 steps to disassemble parts like the sprockets, traction control valve, piston assemblies, barrel assembly, and more. Safety warnings are provided to release pressures and contain fluids before removing any components.
1) The document provides disassembly instructions for components of a 313D excavator including the final drive, travel motor, counterbalance valve, and traction control valve.
2) It lists required tools and safety precautions and provides a step-by-step process to remove each part, noting identification marks and order of components.
3) Detailed illustrations accompany each step to show how to remove components like sprockets, valves, springs, gears, plates, and seals. Proper handling and storage of fluids is also addressed.
This document provides instructions for disassembling the final drive, travel motor, and counterbalance valve of a 313D excavator. It lists the required tools and outlines 20 steps to disassemble the components. These include draining fluids, removing covers, plates, seals, springs, pistons, and other parts. Safety precautions are provided to warn of potential injuries from parts propelled by springs or pressurized hydraulic fluid.
1) The document provides disassembly instructions for components of a 313D excavator including the final drive, travel motor, counterbalance valve, and traction control valve.
2) It lists required tools and outlines over 30 steps to disassemble components such as removing covers, plates, gears, seals, springs, and pistons.
3) Safety precautions are provided, warning of potential injury from parts propelled by springs, hydraulic pressure, and hot oil during disassembly.
This document provides instructions for disassembling the final drive, travel motor, and counterbalance valve of a 313D excavator. It lists the required tools and outlines 20 steps to disassemble the components. Key steps include draining fluids, removing sprockets, valves, seals, springs, pistons, and plates. Safety warnings are provided to release pressures and contain fluids safely.
Caterpillar cat 313 d excavator (prefix kxd) service repair manual (kxd00001 ...ikdkkdmdmdm
This document provides instructions for disassembling the final drive, travel motor, and counterbalance valve of a 313D excavator. It lists the required tools and outlines 20 steps to disassemble the components. Key steps include draining fluids, removing sprockets, valves, seals, springs, pistons, and plates. Safety warnings are provided to be aware of heavy parts, contained fluids, and released spring forces during disassembly.
1) The document provides disassembly instructions for components of a 313D excavator including the final drive, travel motor, counterbalance valve, and traction control valve.
2) It lists required tools and outlines over 30 steps to disassemble components such as removing covers, plates, gears, seals, springs, and pistons.
3) Safety precautions are provided, warning of potential injury from parts propelled by springs, hydraulic pressure, and heavy component weight during disassembly.
This document provides instructions for disassembling the final drive, travel motor, and counterbalance valve of a 313D excavator. It lists the required tools and outlines 20 steps to disassemble the components. Key steps include draining fluids, removing sprockets, valves, seals, springs, pistons, and plates. Safety warnings are provided to release pressures and contain fluids safely.
1) The document provides disassembly instructions for components of a 313D excavator including the final drive, travel motor, counterbalance valve, and traction control valve.
2) It lists required tools and safety precautions and provides a step-by-step process to remove each part, noting identification marks and order of components.
3) Detailed illustrations accompany each step to show how to remove components like sprockets, valves, springs, gears, plates, and seals. Proper handling and storage of fluids is also addressed.
Caterpillar cat 313 d excavator (prefix kxd) service repair manual (kxd00001 ...fjjskejdmdn
This document provides instructions for disassembling the final drive, travel motor, and counterbalance valve of a 313D excavator. It lists the required tools and outlines 20 steps to disassemble the components. Some key points are to drain fluids, mark parts positions, and use care when removing parts with springs or that could be propelled, as personal injury could result.
Similar to Caterpillar cat 311 d lrr excavator (prefix pnj) service repair manual (pnj00001 and up) (20)
Kawasaki 85 z7 wheel loader service repair manual (serial no. 85j1 8001 and up)fjskekdmjekm
This document provides specifications and layout diagrams for a wheel loader. It includes:
1. Specifications such as operating weight, tipping load, engine details, and dimensions.
2. Layout diagrams showing the location of major components such as the bucket, lights, engine, radiator, exhaust filter, and hydraulic components.
3. Details of electrical component locations in and around the cab, including switches, controllers, and sensors.
The document provides technical information on the configuration and specifications of a wheel loader to support maintenance and repair work. Diagrams identify key parts and their locations on the machine.
This document is an operation and maintenance manual for a Kawasaki wheel loader model 85Z7. It provides instructions on operating and maintaining the machine safely and properly. The manual covers safety procedures, component identification, controls and displays, operating instructions, maintenance, and specifications. Operators should read the full manual before operating the machine to learn how to use it correctly and avoid injuries or damage.
Kawasaki 85 z7 wheel loader equipment components parts catalogue manualfjskekdmjekm
This document is a parts catalog for a wheel loader model 85Z7 powered by an ISUZU 6HK1 engine. It contains a list of parts for the pump system with corresponding part names, numbers, quantities and service codes. The parts include pumps, valves, motors, cylinders and other transmission components. Serial numbers are provided to identify applicable models for each part.
This document is a parts catalog for a Wheel Loader model 80Z7B powered by a Cummins QSB6.7 engine. It contains over 500 numbered parts listings organized by system, including the engine, transmission, hydraulics, electrical, and attachments. It also includes name plates and provides the chassis number range and manufacturer's serial number for the 80Z7B model.
Kawasaki 80 z7 wheel loader parts catalogue manual (serial no. 80c6 5001 and up)fjskekdmjekm
This document is a parts catalog for a wheel loader model 80Z7 powered by a Cummins QSB6.7 engine. It contains over 400 parts listed by category including the engine, power train, chassis, cab, electric system, hydraulic system, loader attachment, tools, and name plates. Each part lists the applicable model, mark, and serial number it is associated with.
This document is a parts catalog for a wheel loader model 80Z7 powered by a Cummins QSB6.7 engine. It lists various components of the loader in detail including valves, pumps, motors, transmissions, cylinders, accumulators, axles and more. Each component lists the applicable part number, name, quantity, and other identifying information. The parts catalog provides essential information on replacement parts for maintenance and repair of the 80Z7 wheel loader.
This document is an operation and maintenance manual for a Kawasaki wheel loader model 70Z7. It provides safety instructions and information on operating and maintaining the machine. Key points include:
- Read the manual carefully before operating the machine to learn how to safely operate and service it.
- The machine is designed to operate in temperatures from -20°C to 40°C and altitudes up to 2,000 m.
- Only use diesel fuel specified in JIS K-2204, EN-590 or ASTM D-975 standards with 15 ppm or less sulfur content.
- The manual covers safety labels, components, starting and operating the engine, moving and operating the machine,
Cummins qsl9 engine parts catalogue manualfjskekdmjekm
The document is a parts catalog for a Cummins QSL9 engine with serial numbers 73638149- listing various engine parts and specifications. It contains over 170 pages detailing individual engine components and systems through listings of part names, numbers, quantities and other specifications. Key sections include listings for the cylinder block, crankshaft, front gear housing, cam shaft, injectors, turbocharger, cylinder head and other major engine parts and assemblies.
Caterpillar cat 318 e l excavator (prefix dzf) service repair manual (dzf0000...fjskekdmjekm
The document provides instructions for removing and installing a crankshaft timing ring on a C4.4 engine. It describes:
1) Removing the crankshaft first according to a separate procedure.
2) Cleaning the crankshaft timing ring and inspecting it for wear or damage, replacing if needed.
3) Lubricating and installing the timing ring on the crankshaft, ensuring it is seated properly.
Caterpillar cat 318 d2 l excavator (prefix xgs) service repair manual (xgs000...fjskekdmjekm
This document provides instructions to disassemble the final drive of a 318D2 L excavator. It lists the required tools and describes 33 steps to fully disassemble the final drive components. Key steps include removing the final drive assembly and mounting it to a repair stand, removing plugs and springs from the hydraulic components, and using lifting devices to remove heavier parts like the carrier assembly, ring gears, and main housing pieces. Safety notices are provided to release pressures and supports heavy parts.
Caterpillar cat 318 d2 l excavator (prefix xah) service repair manual (xah000...fjskekdmjekm
This document provides instructions for disassembling and assembling the travel motor of a 318D2 L excavator. The disassembly process involves removing 27 different components from the travel motor in a specific sequence. The assembly process reverses the disassembly steps and provides additional warnings to ensure proper installation of components like the cam plate. Precise alignment of parts is critical for correct function of the travel motor.
Caterpillar cat 318 d2 l excavator (prefix wgr) service repair manual (wgr000...fjskekdmjekm
This document provides instructions to disassemble the final drive of a 318D2 L excavator. It describes 33 steps to remove components such as covers, plates, gears, seals, springs, and housings. Safety notices are included to warn of hazards such as parts propelled by springs and pressurized hydraulic fluid. Tools required include lifting devices, brackets, bolts, and pullers. Thorough cleaning is advised before disassembly to prevent dirt entry.
Caterpillar cat 318 d2 l excavator (prefix sgb) service repair manual (sgb000...fjskekdmjekm
This document provides instructions for disassembling and assembling the final drive of a 318D2 excavator. It lists the required tools and outlines 33 steps to disassemble the final drive components such as the cover, carrier assembly, ring gears, and housing. It then describes 28 steps to reassemble the final drive, including preloading the bearings, installing seals and pins, and reassembling the carrier assembly components. Cleanliness is emphasized throughout to prevent dirt from entering internal mechanisms during disassembly and assembly.
Caterpillar cat 318 d2 l excavator (prefix dpj) service repair manual (dpj000...fjskekdmjekm
This document provides instructions to disassemble the final drive on a 318D2 L excavator. It lists the required tools and gives step-by-step directions to remove each component. Key steps include using lifting devices and tools to remove the cover, carrier assembly, ring gears, and housing pieces. Proper cleaning and safety precautions are noted throughout. The goal is to fully separate all parts of the final drive for maintenance or repair.
This document provides instructions for disassembling and assembling the final drive of a 318D2 excavator. It lists the required tools and outlines 33 steps to disassemble the final drive components such as the cover, carrier assembly, ring gears, and housing. It then describes 28 steps to reassemble the final drive, including preloading the bearings, installing seals and pins, and reassembling the carrier assembly components. Cleanliness is emphasized throughout to prevent dirt from entering internal mechanisms during disassembly and assembly.
Caterpillar cat 318 d l excavator (prefix zkj) service repair manual (zkj0000...fjskekdmjekm
This document provides instructions for disassembling and assembling the final drive of a 318D L excavator. It lists the required tools and presents 33 steps for disassembly, including removing the final drive cover, carrier assembly, ring gears, and other components. It then lists 13 steps for assembly, including installing bearings in the main housing, preloading the bearings to determine the correct shim thickness, installing seals and gears, and reassembling disassembled components. The goal is to disassemble and clean all parts before precise reassembly in the reverse order of disassembly.
Caterpillar cat 318 c ln excavator (prefix mdy) service repair manual (mdy000...fjskekdmjekm
This document provides instructions for disassembling and assembling the final drive of a 318C excavator. It lists the required tools and presents 33 steps for disassembly, including removing components like the cover, carrier assembly, ring gears, and seals. It then lists 4 notes about cleanliness and applying lubricants before presenting 29 steps for assembly, reversing the disassembly process and adding components like bearings and seals.
car rentals in nassau bahamas | atv rental nassau bahamasjustinwilson0857
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 311D LRR EXCAVATOR PNJ
Configuration: 311D LRR Excavator PNJ00001-UP (MACHINE) POWERED BY C4.2 Engine
Disassembly and Assembly
311D LRR Excavator Machine Systems
Media Number -RENR9211-01 Publication Date -01/10/2009 Date Updated -05/10/2009
i04126149
Final Drive and Travel Motor - Disassemble
SMCS - 4050-015; 4351-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 3
B 1P-2420 Transmission Repair Stand 1
C 8T-6699 Bolts 2
D
1P-0074 Slide Hammer Puller Gp 1
4C-5666 Threaded Adapter 1
123-6702 Backlash Gauge Gp 1
E 1P-0510 Driver Gp 1
F 8H-0663 Bearing Puller Gp 1
G 1P-1863 Retaining Ring Pliers 1
H 9U-7346 Spanner Wrench As 1
Start By:
a. Remove the final drive and the travel motor. Refer to Disassembly and Assembly Manual ,
"Final Drive and Travel Motor - Remove".
NOTICE
1/23
311D LRR Excavator PNJ00001-UP (MACHINE) POWERED BY C4.2 Engine(SEB...
2020/11/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
1. Thoroughly clean the outside of the final drive and travel motor prior to disassembly.
2. Remove the sprocket from the final drive and the travel motor. The weight of the sprocket is
approximately 39 kg (85 lb).
3. Mark the alignment of the final drive and travel motor for reassembly purposes. The parts
must be reinstalled in the original locations.
2/23
311D LRR Excavator PNJ00001-UP (MACHINE) POWERED BY C4.2 Engine(SEB...
2020/11/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 1 g00940682
4. Use Tooling (A) and a suitable lifting device to position the final drive and the travel motor
onto Tooling (B). The combined weight of the final drive and travel motor is approximately
170 kg (375 lb).
5. Drain the oil from the final drive into a suitable container for storage or for disposal. Refer
to Operation and Maintenance Manual, "Capacities (Refill)" for the capacity of the final
drive.
6. Remove fittings (1). Remove fittings (2) from traction control valve (3).
7. Remove nine bolts (4) that secure traction control valve (3) to the final drive.
8. Use two persons to remove traction control valve (3) from the final drive. The weight of
travel brake valve (3) is approximately 27 kg (60 lb).
3/23
311D LRR Excavator PNJ00001-UP (MACHINE) POWERED BY C4.2 Engine(SEB...
2020/11/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 2 g00940716
9. Remove valve plate (5) and O-ring seal (6).
Illustration 3 g01405139
10. Use Tooling (D) to remove bearing (7).
Disassembly of the Counterbalance Valve
Illustration 4 g01405725
4/23
311D LRR Excavator PNJ00001-UP (MACHINE) POWERED BY C4.2 Engine(SEB...
2020/11/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 5 g01405227
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
1. Position the counterbalance valve, as shown. Remove plug (8) and adapter (9).
2. Remove spring (10) and spool (11).
Illustration 6 g01405232
5/23
311D LRR Excavator PNJ00001-UP (MACHINE) POWERED BY C4.2 Engine(SEB...
2020/11/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. 3. Remove relief valve assemblies (12).
Illustration 7 g01405243
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
4. Remove seat (13). Seat (13) is pressed onto valve (17). Use new parts if seat (13) or valve
(17) is damaged. Do not disassemble these components. Make sure that you reuse the other
component.
5. Remove backup ring (14) and O-ring seal (15).
6. Remove O-ring seal (22).
7. Remove nut (20).
8. Remove screw (27).
9. Remove stopper (26). Remove backup ring (19) and O-ring seal (18) from stopper (19).
10. Remove valve (21), piston (25), and spring (16) from the housing.
11. Remove backup ring (23) and O-ring seal (24) from piston (25).
6/23
311D LRR Excavator PNJ00001-UP (MACHINE) POWERED BY C4.2 Engine(SEB...
2020/11/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 8 g01405284
Illustration 9 g01405299
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
12. Remove covers (28) and the O-ring seals.
13. Remove springs (29), guides (30), and spool assembly (31).
7/23
311D LRR Excavator PNJ00001-UP (MACHINE) POWERED BY C4.2 Engine(SEB...
2020/11/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 10 g01405345
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
14. Remove valve (32), spring (33), and ball (34) from one end of spool (35). Repeat for the
other end of spool (35).
Illustration 11 g01405633
8/23
311D LRR Excavator PNJ00001-UP (MACHINE) POWERED BY C4.2 Engine(SEB...
2020/11/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
15. Remove plug (36), spring (38), and piston (39) from both sides of the housing assembly.
16. Remove O-ring seal (37) from each plug (36).
Note: Remove the remaining allen head bolts from the housing assembly for cleaning
purposes, if necessary. Each allen head bolt has an O-ring seal. Check the O-ring seal for
wear or for damage. Replace the O-ring seal, if necessary.
Disassembly of the Travel Motor
Illustration 12 g01405794
1. Remove O-ring seal (40) and springs (41).
9/23
311D LRR Excavator PNJ00001-UP (MACHINE) POWERED BY C4.2 Engine(SEB...
2020/11/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 13 g01405828
2. Install Tooling (C) onto piston assembly (42). Use Tooling (C) and a suitable prybar to
remove piston assembly (42) from body (43).
Illustration 14 g01405855
3. Remove O-ring seals (45) and (46) from piston assembly (42). Remove backup rings (44)
and (47) from piston assembly (42).
10/23
311D LRR Excavator PNJ00001-UP (MACHINE) POWERED BY C4.2 Engine(SE...
2020/11/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 15 g01405867
4. Use suitable drivers or a suitable lever to remove guide assembly (48).
Illustration 16 g01405885
5. Remove O-ring seal (49) and backup ring (50) from guide assembly (48).
11/23
311D LRR Excavator PNJ00001-UP (MACHINE) POWERED BY C4.2 Engine(SE...
2020/11/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 17 g01406117
6. Remove four separator plates (51) and four friction plates (52). Note the alternating order of
separator plates (51) and friction plates (52) for assembly purposes.
Note: Do not allow the components of barrel assembly (53) to come apart while you
remove barrel assembly (53). The components of barrel assembly (53) must be reinstalled
into the original positions.
Note: Oil will drain from the final drive. Place a suitable container under the final drive for
storage or disposal. Refer to Operation and Maintenance Manual, "Capacities (Refill)" for
the fluid capacity of the final drive.
7. Position the final drive horizontally.
8. Remove barrel assembly (53).
12/23
311D LRR Excavator PNJ00001-UP (MACHINE) POWERED BY C4.2 Engine(SE...
2020/11/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 18 g01406180
Note: Mark the component locations for assembly purposes before you disassemble barrel
assembly (53).
9. Remove piston assemblies (54) and retainer (55) from barrel assembly (53).
Illustration 19 g01406210
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
10. Remove retainer (56), spacer (57), and springs (58) from barrel assembly (53).
13/23
311D LRR Excavator PNJ00001-UP (MACHINE) POWERED BY C4.2 Engine(SE...
2020/11/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 20 g01406263
11. Put location marks on cam plate (59) for assembly purposes. Make sure that the thick end of
cam plate (59) is adjacent to the opening that is across body (43). Remove cam plate (59).
Illustration 21 g01406329
Illustration 22 g01406338
14/23
311D LRR Excavator PNJ00001-UP (MACHINE) POWERED BY C4.2 Engine(SE...
2020/11/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
12. Remove piston (60) and spring (62).
13. Remove key (61).
Disassembly of the Final Drive
Illustration 23 g01406376
1. Use a suitable lifting device to position the final drive on Tooling (B), as shown. The weight
of the final drive is approximately 200 kg (441 lb).
2. Remove plugs (63). Remove the O-ring seals from plugs (63). Check the O-ring seals for
wear or for damage. Replace the O-ring seals, if necessary.
3. Remove bolts (65). Remove cover (64).
15/23
311D LRR Excavator PNJ00001-UP (MACHINE) POWERED BY C4.2 Engine(SE...
2020/11/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 24 g01406386
4. Raise the temperature of bolts (66) in order to loosen the thread sealant.
5. Remove bolts (66) and plate (67).
Illustration 25 g01406397
6. Remove sun gear (68).
16/23
311D LRR Excavator PNJ00001-UP (MACHINE) POWERED BY C4.2 Engine(SE...
2020/11/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 26 g01406400
7. Attach Tooling (A) and a suitable lifting device to carrier assembly (69). Remove carrier
assembly (69), planetary gear assembly (70), and bearing assembly (71) as a unit.
Illustration 27 g01406789
8. Remove planetary gear (70) and bearing assembly (71) from carrier assembly (69). Remove
the remaining planetary gears (70) and bearings (71).
Illustration 28 g01406822
9. Remove sun gear (72).
17/23
311D LRR Excavator PNJ00001-UP (MACHINE) POWERED BY C4.2 Engine(SE...
2020/11/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. 10. Raise the temperature of bolts (73) in order to loosen the thread sealant. Remove bolts (73).
Remove plate (74).
Illustration 29 g01406850
11. Remove retaining ring (75) from sun gear (72). Check retaining ring (75) for wear or for
damage. Replace retaining ring (75), if necessary.
Illustration 30 g01406853
12. Remove planetary gear (76).
18/23
311D LRR Excavator PNJ00001-UP (MACHINE) POWERED BY C4.2 Engine(SE...
2020/11/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 31 g01406875
13. Remove bearing (77), race (78), and thrust washer (79).
14. Repeat Steps 12 and 13 in order to remove the remaining planetary gear assemblies.
Illustration 32 g01406882
15. Remove bolt (80) and plate (81).
19/23
311D LRR Excavator PNJ00001-UP (MACHINE) POWERED BY C4.2 Engine(SE...
2020/11/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 33 g01406885
Illustration 34 g01406886
16. Use Tooling (H) to remove nut (82).
Illustration 35 g01406906
17. Install Tooling (A) and a suitable lifting device to housing (83). The weight of housing (83)
is approximately 35 kg (77 lb).
18. Remove housing (83) from body assembly (84).
20/23
311D LRR Excavator PNJ00001-UP (MACHINE) POWERED BY C4.2 Engine(SE...
2020/11/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 36 g01406912
19. Remove Duo-Cone Seal Gp seal (85) from the body assembly. Remove the Duo-Cone Seal
Gp seal from the housing.
Illustration 37 g01407100
20. Remove both bearings (86) from housing (83).
21/23
311D LRR Excavator PNJ00001-UP (MACHINE) POWERED BY C4.2 Engine(SE...
2020/11/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 38 g01407089
21. Remove both bearings (87) from housing (83).
Illustration 39 g01407115
22. Position body assembly (84) horizontally. Remove shaft assembly (88), the bearing, and the
retaining ring.
22/23
311D LRR Excavator PNJ00001-UP (MACHINE) POWERED BY C4.2 Engine(SE...
2020/11/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
25. Illustration 40 g01407144
23. Use Tooling (G) to remove retaining ring (89) from shaft assembly (88).
Illustration 41 g01407161
24. Use Tooling (E), Tooling (F), and a suitable press to remove bearing (90).
Illustration 42 g01407166
25. Remove lip seal (91) from the body assembly.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Nov 25 00:35:21 UTC+0800 2020
23/23
311D LRR Excavator PNJ00001-UP (MACHINE) POWERED BY C4.2 Engine(SE...
2020/11/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 311D LRR EXCAVATOR PNJ
Configuration: 311D LRR Excavator PNJ00001-UP (MACHINE) POWERED BY C4.2 Engine
Disassembly and Assembly
311D LRR Excavator Machine Systems
Media Number -RENR9211-01 Publication Date -01/10/2009 Date Updated -05/10/2009
i07269885
Final Drive and Travel Motor - Assemble
SMCS - 4050-016; 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 3
B 1P-2420 Transmission Repair Stand 1
E 1P-0510 Driver Gp 1
F 8H-0663 Bearing Puller Gp 1
G 1P-1863 Retaining Ring Pliers 1
H 9U-7346 Spanner Wrench As 1
K 1U-7558 Mounting Adapter Gp(1)
1
L - Loctite 271 -
M - Loctite High Flex GM -
N 169-0503 Installation Kit 1
P 1U-6434 Duo-Cone Seal Installer As 1
Q 4C-3761 C-Clamp 2
R FT-2766 Rolling Torque Bar 1
S - Loctite 272 -
(1)
1/24
311D LRR Excavator PNJ00001-UP (MACHINE) POWERED BY C4.2 Engine(SEB...
2020/11/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. The bent plates for the mounting adapter may be modified so that the mounting adapter can be assembled to the
housing.
Assembly Procedure for the Final Drive
Illustration 1 g01407166
1. Use Tooling (E) to install lip seal (91) into the body assembly.
Illustration 2 g01407561
2. Use Tooling (E), Tooling (F), and a suitable press to install bearing assembly (90) onto shaft
assembly (88).
2/24
311D LRR Excavator PNJ00001-UP (MACHINE) POWERED BY C4.2 Engine(SEB...
2020/11/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...