The document provides instructions for removing and installing various engine components of a Caterpillar 305E2 CR Mini Hydraulic Excavator, including the fuel injection lines, exhaust gas recirculation cooler, fuel injection pump, electronic unit injector, turbocharger, and exhaust gas recirculation valve. The procedures describe disconnecting hoses and electrical connections, removing mounting hardware, and installing components in the reverse order of removal while following safety precautions for high pressure fuel and hot coolant.
Caterpillar Cat 305E2 CR Mini Hydraulic Excavator (Prefix DF5) Service Repair...tuzhiyou2
The document provides instructions for removing and installing various components of a 305E2 CR Mini Hydraulic Excavator engine, including:
- Fuel injection lines
- Exhaust gas recirculation cooler
- Fuel injection pump
- Electronic unit injector
- Turbocharger
- Exhaust gas recirculation valve
The procedures describe removing mounting bolts and clamps, disconnecting hoses and electrical connections, and installing components in the reverse order, taking appropriate safety precautions for high pressure fuel and hot coolant.
Caterpillar Cat 305E2 CR Mini Hydraulic Excavator (Prefix DF5) Service Repair...qfyc504378
The document provides instructions for removing and installing various components of a 305E2 CR Mini Hydraulic Excavator engine, including:
- Fuel injection lines, following 7 steps involving removing bolts, clamps and hoses.
- Exhaust gas recirculation cooler, following 5 steps involving removing hoses, clamps, bolts and the cooler component.
- Fuel injection pump, following 4 steps involving removing hoses, bolts, nuts and the pump component.
Caterpillar Cat 305E2 CR Mini Hydraulic Excavator (Prefix DF5) Service Repair...lituo39419496
The document provides instructions for removing and installing various components of a 305E2 CR Mini Hydraulic Excavator engine, including:
- Fuel injection lines, following 9 steps for removal and 1 step for installation.
- Exhaust gas recirculation cooler, following 5 steps for removal and 1 step for installation.
- Fuel injection pump, following 5 steps for removal and 1 step for installation.
- Electronic unit injector, following 2 steps for removal and 1 step for installation.
- Turbocharger, following 6 steps for removal.
Caterpillar Cat 305E2 CR Mini Hydraulic Excavator (Prefix BZ5) Service Repair...tuzhiyou2
The document provides instructions for removing and installing various components of a 305E2 CR Mini Hydraulic Excavator powered by a C2.4 engine, including:
- Removing and installing the fuel manifold (rail)
- Removing and installing the fuel injection lines
- Removing and installing the fuel injection pump
- Removing and installing the electronic unit injector
- Removing and installing the turbocharger
- Removing and installing the exhaust gas recirculation valve
The instructions include safety warnings and step-by-step procedures for each component.
Caterpillar Cat 305E2 CR Mini Hydraulic Excavator (Prefix BZ5) Service Repair...qfyc504378
The document provides instructions for removing and installing various components of a 305E2 CR Mini Hydraulic Excavator BZ5 powered by a C2.4 engine, including:
- Removing and installing the fuel manifold (rail)
- Removing and installing the fuel injection lines
- Removing and installing the electronic unit injector
- Removing and installing the turbocharger
- Removing and installing the exhaust gas recirculation valve
The procedures provide illustrations and specify torque values for fasteners. Safety notices are included regarding working with high pressure fuel and draining coolant.
Caterpillar Cat 305E2 CR Mini Hydraulic Excavator (Prefix BZ5) Service Repair...lituo39419496
The document provides instructions for removing and installing various components of a 305E2 CR Mini Hydraulic Excavator BZ5 powered by a C2.4 engine, including:
- Removing and installing the fuel manifold (rail)
- Removing and installing the fuel injection lines
- Removing and installing the electronic unit injector
- Removing and installing the turbocharger
The procedures provide illustrations and step-by-step instructions and include safety warnings for working on high pressure fuel systems and draining hot coolant. Torque specifications are provided for reinstalling components.
Caterpillar Cat 305E2 CR Mini Hydraulic Excavator (Prefix BZ5) Service Repair...paws21610697
The document provides instructions for removing and installing various components of a 305E2 CR Mini Hydraulic Excavator BZ5 engine, including the fuel manifold, fuel injection lines, fuel injection pump, electronic unit injector, turbocharger, and exhaust gas recirculation valve. The procedures describe removing mounting hardware and disconnecting fluid lines before removing each component, then installing in the reverse order. Safety notices warn of burn hazards from hot coolant and high pressure fuel.
Caterpillar Cat 305E2 CR Mini Hydraulic Excavator (Prefix BZ5) Service Repair...f7djidksmd3e
This document provides instructions for removing and installing various components of a 305E2 CR Mini Hydraulic Excavator engine, including:
- Removing the fuel manifold by removing bolts and lines, taking care not to damage sensors.
- Removing fuel injection lines by disconnecting hoses and tubes after capping lines to prevent contamination.
- Removing the exhaust gas recirculation cooler by draining coolant and removing hoses and mounting brackets.
- Removing the fuel injection pump by disconnecting lines and hoses after removing mounting nuts and bolts.
- Removing electronic unit injectors by disconnecting hoses after draining and capping fuel lines to prevent contamination or injury from high pressure fuel.
Caterpillar Cat 305E2 CR Mini Hydraulic Excavator (Prefix DF5) Service Repair...tuzhiyou2
The document provides instructions for removing and installing various components of a 305E2 CR Mini Hydraulic Excavator engine, including:
- Fuel injection lines
- Exhaust gas recirculation cooler
- Fuel injection pump
- Electronic unit injector
- Turbocharger
- Exhaust gas recirculation valve
The procedures describe removing mounting bolts and clamps, disconnecting hoses and electrical connections, and installing components in the reverse order, taking appropriate safety precautions for high pressure fuel and hot coolant.
Caterpillar Cat 305E2 CR Mini Hydraulic Excavator (Prefix DF5) Service Repair...qfyc504378
The document provides instructions for removing and installing various components of a 305E2 CR Mini Hydraulic Excavator engine, including:
- Fuel injection lines, following 7 steps involving removing bolts, clamps and hoses.
- Exhaust gas recirculation cooler, following 5 steps involving removing hoses, clamps, bolts and the cooler component.
- Fuel injection pump, following 4 steps involving removing hoses, bolts, nuts and the pump component.
Caterpillar Cat 305E2 CR Mini Hydraulic Excavator (Prefix DF5) Service Repair...lituo39419496
The document provides instructions for removing and installing various components of a 305E2 CR Mini Hydraulic Excavator engine, including:
- Fuel injection lines, following 9 steps for removal and 1 step for installation.
- Exhaust gas recirculation cooler, following 5 steps for removal and 1 step for installation.
- Fuel injection pump, following 5 steps for removal and 1 step for installation.
- Electronic unit injector, following 2 steps for removal and 1 step for installation.
- Turbocharger, following 6 steps for removal.
Caterpillar Cat 305E2 CR Mini Hydraulic Excavator (Prefix BZ5) Service Repair...tuzhiyou2
The document provides instructions for removing and installing various components of a 305E2 CR Mini Hydraulic Excavator powered by a C2.4 engine, including:
- Removing and installing the fuel manifold (rail)
- Removing and installing the fuel injection lines
- Removing and installing the fuel injection pump
- Removing and installing the electronic unit injector
- Removing and installing the turbocharger
- Removing and installing the exhaust gas recirculation valve
The instructions include safety warnings and step-by-step procedures for each component.
Caterpillar Cat 305E2 CR Mini Hydraulic Excavator (Prefix BZ5) Service Repair...qfyc504378
The document provides instructions for removing and installing various components of a 305E2 CR Mini Hydraulic Excavator BZ5 powered by a C2.4 engine, including:
- Removing and installing the fuel manifold (rail)
- Removing and installing the fuel injection lines
- Removing and installing the electronic unit injector
- Removing and installing the turbocharger
- Removing and installing the exhaust gas recirculation valve
The procedures provide illustrations and specify torque values for fasteners. Safety notices are included regarding working with high pressure fuel and draining coolant.
Caterpillar Cat 305E2 CR Mini Hydraulic Excavator (Prefix BZ5) Service Repair...lituo39419496
The document provides instructions for removing and installing various components of a 305E2 CR Mini Hydraulic Excavator BZ5 powered by a C2.4 engine, including:
- Removing and installing the fuel manifold (rail)
- Removing and installing the fuel injection lines
- Removing and installing the electronic unit injector
- Removing and installing the turbocharger
The procedures provide illustrations and step-by-step instructions and include safety warnings for working on high pressure fuel systems and draining hot coolant. Torque specifications are provided for reinstalling components.
Caterpillar Cat 305E2 CR Mini Hydraulic Excavator (Prefix BZ5) Service Repair...paws21610697
The document provides instructions for removing and installing various components of a 305E2 CR Mini Hydraulic Excavator BZ5 engine, including the fuel manifold, fuel injection lines, fuel injection pump, electronic unit injector, turbocharger, and exhaust gas recirculation valve. The procedures describe removing mounting hardware and disconnecting fluid lines before removing each component, then installing in the reverse order. Safety notices warn of burn hazards from hot coolant and high pressure fuel.
Caterpillar Cat 305E2 CR Mini Hydraulic Excavator (Prefix BZ5) Service Repair...f7djidksmd3e
This document provides instructions for removing and installing various components of a 305E2 CR Mini Hydraulic Excavator engine, including:
- Removing the fuel manifold by removing bolts and lines, taking care not to damage sensors.
- Removing fuel injection lines by disconnecting hoses and tubes after capping lines to prevent contamination.
- Removing the exhaust gas recirculation cooler by draining coolant and removing hoses and mounting brackets.
- Removing the fuel injection pump by disconnecting lines and hoses after removing mounting nuts and bolts.
- Removing electronic unit injectors by disconnecting hoses after draining and capping fuel lines to prevent contamination or injury from high pressure fuel.
Caterpillar Cat 305E2 CR Mini Hydraulic Excavator (Prefix BZ5) Service Repair...f8usiedkdmm
This document provides instructions for removing and installing various components of a 305E2 CR Mini Hydraulic Excavator engine, including:
- Removing the fuel manifold by removing bolts and disconnecting fuel injection lines.
- Removing fuel injection lines by disconnecting hose assemblies and removing bolts, clamps and tube assemblies.
- Removing the exhaust gas recirculation cooler by draining coolant, removing hoses and brackets, and bolts.
- Removing the fuel injection pump by disconnecting harnesses and hoses, and removing nuts, bolts and the pump.
- Removing electronic unit injectors by disconnecting hoses after draining and capping fuel lines.
Caterpillar Cat 305E2 CR Mini Hydraulic Excavator (Prefix BZ5) Service Repair...uddksemd8ud
The document provides instructions for removing and installing various components of a 305E2 CR Mini Hydraulic Excavator BZ5 engine, including the fuel manifold, fuel injection lines, fuel injection pump, electronic unit injector, turbocharger, and exhaust gas recirculation valve. The procedures describe removing mounting hardware and disconnecting fluid lines before removing each component, then installing in the reverse order. Safety notices warn of burn hazards from hot coolant and high pressure fuel.
Caterpillar cat 305 e2 cr mini hydraulic excavator (prefix bz5) service repai...cdfvvv1
This document provides instructions for removing and installing various components of a 305E2 CR Mini Hydraulic Excavator engine, including:
- Removing the fuel manifold by removing bolts and lines, taking care not to damage sensors.
- Removing fuel injection lines by disconnecting hoses and tubes after capping lines to prevent contamination.
- Removing the exhaust gas recirculation cooler by draining coolant and removing hoses and mounting brackets.
- Removing the fuel injection pump by disconnecting lines and hoses after removing mounting nuts and bolts.
- Removing electronic unit injectors by disconnecting hoses after draining and capping fuel lines to prevent contamination or damage according to safety guidelines.
Caterpillar Cat 305E2 CR Mini Hydraulic Excavator (Prefix BZ5) Service Repair...jdjkskmikdkmd
The document provides instructions for removing and installing various components of a 305E2 CR Mini Hydraulic Excavator BZ5 engine, including the fuel manifold, fuel injection lines, fuel injection pump, electronic unit injector, turbocharger, and exhaust gas recirculation valve. The procedures describe removing mounting hardware and disconnecting fluid lines, hoses, and electrical connectors and installing components in the reverse order. Safety precautions are provided regarding working with high pressure fuel and hot coolant.
Caterpillar cat 305 e2 cr mini hydraulic excavator (prefix bz5) service repai...fikskkdmmd1
This document provides instructions for removing and installing various components of a 305E2 CR Mini Hydraulic Excavator engine, including:
- Removing the fuel manifold by removing bolts and lines, taking care not to damage sensors.
- Removing fuel injection lines by disconnecting hoses and tubes after capping lines to prevent contamination.
- Removing the exhaust gas recirculation cooler by draining coolant and removing hoses and mounting brackets.
- Removing the fuel injection pump by disconnecting lines and hoses and removing nuts and bolts.
- Removing electronic unit injectors by disconnecting hoses after taking safety precautions for the high pressure fuel system.
Caterpillar Cat 305E2 CR Mini Hydraulic Excavator (Prefix BZ5) Service Repair...yan77xunhao
This document provides instructions for removing and installing various components of a 305E2 CR Mini Hydraulic Excavator engine, including:
- Removing the fuel manifold by removing bolts and lines, taking care not to damage sensors.
- Removing fuel injection lines by disconnecting hoses and tubes after capping lines to prevent contamination.
- Removing the exhaust gas recirculation cooler by draining coolant and removing hoses and mounting brackets.
- Removing the fuel injection pump by disconnecting lines and hoses after removing mounting nuts and bolts.
- Removing electronic unit injectors by disconnecting hoses after draining and capping fuel lines to prevent contamination.
Caterpillar cat 305 e2 cr mini hydraulic excavator (prefix bz5) service repai...fjskekfseik
This document provides instructions for removing and installing various components of a 305E2 CR Mini Hydraulic Excavator engine, including:
- Removing the fuel manifold by removing bolts and disconnecting fuel injection lines.
- Removing fuel injection lines by disconnecting hose assemblies and removing bolts, clamps and tubes.
- Removing the exhaust gas recirculation cooler by draining coolant, removing hoses and brackets, and bolts.
- Removing the fuel injection pump by disconnecting harnesses and hoses, and removing nuts, bolts and the pump.
- Removing electronic unit injectors by disconnecting hoses after draining fuel and removing clips and hoses.
Caterpillar Cat 305.5E2 CR Mini Hydraulic Excavator (Prefix FR5) Service Repa...tuzhiyou2
The document provides instructions for removing and installing various fuel system components on a 305.5E2 CR Mini Hydraulic Excavator FR5, including the fuel manifold rail, fuel injection lines, fuel injection pump, exhaust gas recirculation cooler, and electronic unit injectors. The procedures note safety hazards and provide illustrations showing part locations and the order for removal and installation of components.
Caterpillar Cat 305.5E2 CR Mini Hydraulic Excavator (Prefix FR5) Service Repa...qfyc504378
The document provides instructions for removing and installing various components of a Caterpillar 305.5E2 CR Mini Hydraulic Excavator engine, including the fuel manifold rail, fuel injection lines, fuel injection pump, electronic unit injectors, turbocharger, and exhaust gas recirculation valve. Safety precautions are provided noting potential hazards such as high pressure fuel, sulfuric acid, and hot coolant. Procedures include removing mounting bolts, clamps, and hoses and installing components in reverse order while following torque specifications.
Caterpillar Cat 305.5E2 CR Mini Hydraulic Excavator (Prefix FR5) Service Repa...lituo39419496
This document provides instructions for removing and installing various components of a Caterpillar 305.5E2 CR Mini Hydraulic Excavator engine, including the fuel manifold rail, fuel injection lines, fuel injection pump, electronic unit injectors, turbocharger, and exhaust gas recirculation valve. Safety precautions are provided at the beginning of each section to warn technicians of potential hazards like high pressure fuel, sulfuric acid, and hot coolant when working on the engine. Detailed step-by-step procedures and diagrams guide technicians through the removal and installation process for each component.
Caterpillar Cat 305.5E2 CR Mini Hydraulic Excavator (Prefix FR5) Service Repa...fuusejkddmmd3e
The document provides instructions for removing and installing various components of a 305.5E2 CR Mini Hydraulic Excavator FR5 engine, including the fuel manifold rail, fuel injection lines, electronic unit injector, turbocharger, exhaust gas recirculation valve, and more. Each section includes detailed step-by-step instructions and accompanying illustrations. Safety warnings are provided throughout regarding hazards such as high pressure fuel, sulfuric acid, and hot coolant.
Caterpillar Cat 305.5E2 CR Mini Hydraulic Excavator (Prefix FR5) Service Repa...dujkdksmdmdm
The document provides instructions for removing and installing various components of a 305.5E2 CR Mini Hydraulic Excavator FR500001-UP engine, including the fuel manifold rail, fuel injection lines, exhaust gas recirculation cooler, fuel injection pump, and electronic unit injector. Safety precautions are provided regarding working with high pressure fuel and sulfuric acid. The procedures note removing mounting hardware and disconnecting lines, then reversing the order for installation.
Caterpillar Cat 305.5E2 CR Mini Hydraulic Excavator (Prefix FR5) Service Repa...jdksmmdmdd
The document provides instructions for removing and installing various components of a 305.5E2 CR Mini Hydraulic Excavator FR5 engine, including the fuel manifold rail, fuel injection lines, electronic unit injector, turbocharger, exhaust gas recirculation valve, and more. The steps describe draining fluids, removing bolts, clamps and other hardware, and installing components in reverse order, noting proper torque specifications for reinstallation. Safety warnings are provided throughout regarding hazards such as high pressure fuel, sulfuric acid, and hot coolant.
Caterpillar Cat 305.5E2 CR Mini Hydraulic Excavator (Prefix FR5) Service Repa...yan77xunhao
The document provides instructions for removing and installing various components of a 305.5E2 CR Mini Hydraulic Excavator FR500001-UP engine, including the fuel manifold rail, fuel injection lines, exhaust gas recirculation cooler, fuel injection pump, and electronic unit injector. Safety precautions are provided regarding working with high pressure fuel and sulfuric acid. The procedures note removing mounting hardware and disconnecting lines, then reversing the order for installation.
Caterpillar cat 305.5 e2 cr mini hydraulic excavator (prefix fr5) service rep...dikdkskmdm
The document provides instructions for removing and installing various components of a 305.5E2 CR Mini Hydraulic Excavator FR500001-UP engine, including the fuel manifold rail, fuel injection lines, exhaust gas recirculation cooler, fuel injection pump, and electronic unit injector. Safety precautions are provided regarding working with high pressure fuel and sulfuric acid. The procedures note removing fasteners and hoses in the listed order and installing components in the reverse order.
Caterpillar Cat 305.5E2 CR Mini Hydraulic Excavator (Prefix FR5) Service Repa...fujkse9didkke3
The document provides instructions for removing and installing various components of a 305.5E2 CR Mini Hydraulic Excavator FR5 engine, including the fuel manifold rail, fuel injection lines, electronic unit injector, turbocharger, exhaust gas recirculation valve, and more. The steps describe draining fluids, removing bolts, clamps and other hardware, and installing components in reverse order, noting proper torque specifications for reinstallation. Safety warnings are provided throughout regarding hazards such as high pressure fuel, sulfuric acid, and hot coolant.
Caterpillar Cat 305.5E2 CR Mini Hydraulic Excavator (Prefix FR5) Service Repa...orrf0370383
The document provides instructions for removing and installing various components of a 305.5E2 CR Mini Hydraulic Excavator FR5 engine, including the fuel manifold rail, fuel injection lines, electronic unit injector, turbocharger, exhaust gas recirculation valve, and more. The steps describe draining fluids, removing bolts, clamps and other hardware, and installing components in reverse order, noting proper torque specifications for reinstallation. Safety warnings are provided throughout regarding hazards such as high pressure fuel, sulfuric acid, and hot coolant.
Caterpillar cat 305.5 e2 cr mini hydraulic excavator (prefix fr5) service rep...cdfzxs
The document provides instructions for removing and installing various components of a 305.5E2 CR Mini Hydraulic Excavator FR5 engine, including the fuel manifold rail, fuel injection lines, electronic unit injector, turbocharger, exhaust gas recirculation valve, and more. The steps describe draining fluids, removing bolts, clamps and other hardware, and installing components in reverse order, noting proper torque specifications for reinstallation. Safety warnings are provided throughout regarding hazards such as high pressure fuel, sulfuric acid, and hot coolant.
Caterpillar cat 305.5 e2 cr mini hydraulic excavator (prefix fr5) service rep...fjjskekmsemm
The document provides instructions for removing and installing various components of a 305.5E2 CR Mini Hydraulic Excavator FR500001-UP engine, including the fuel manifold rail, fuel injection lines, exhaust gas recirculation cooler, fuel injection pump, and electronic unit injector. Safety precautions are provided regarding working with high pressure fuel and sulfuric acid. The procedures note removing fasteners and hoses in the listed order and installing components in the reverse order.
Caterpillar cat 305.5 e2 cr mini hydraulic excavator (prefix fr5) service rep...fjjskekdm
The document provides instructions for removing and installing various components of a 305.5E2 CR Mini Hydraulic Excavator FR500001-UP engine, including the fuel manifold rail, fuel injection lines, exhaust gas recirculation cooler, fuel injection pump, and electronic unit injector. Safety precautions are outlined regarding working with high pressure fuel and potential hazards.
Caterpillar Cat 305E2 CR Mini Hydraulic Excavator (Prefix BZ5) Service Repair...f8usiedkdmm
This document provides instructions for removing and installing various components of a 305E2 CR Mini Hydraulic Excavator engine, including:
- Removing the fuel manifold by removing bolts and disconnecting fuel injection lines.
- Removing fuel injection lines by disconnecting hose assemblies and removing bolts, clamps and tube assemblies.
- Removing the exhaust gas recirculation cooler by draining coolant, removing hoses and brackets, and bolts.
- Removing the fuel injection pump by disconnecting harnesses and hoses, and removing nuts, bolts and the pump.
- Removing electronic unit injectors by disconnecting hoses after draining and capping fuel lines.
Caterpillar Cat 305E2 CR Mini Hydraulic Excavator (Prefix BZ5) Service Repair...uddksemd8ud
The document provides instructions for removing and installing various components of a 305E2 CR Mini Hydraulic Excavator BZ5 engine, including the fuel manifold, fuel injection lines, fuel injection pump, electronic unit injector, turbocharger, and exhaust gas recirculation valve. The procedures describe removing mounting hardware and disconnecting fluid lines before removing each component, then installing in the reverse order. Safety notices warn of burn hazards from hot coolant and high pressure fuel.
Caterpillar cat 305 e2 cr mini hydraulic excavator (prefix bz5) service repai...cdfvvv1
This document provides instructions for removing and installing various components of a 305E2 CR Mini Hydraulic Excavator engine, including:
- Removing the fuel manifold by removing bolts and lines, taking care not to damage sensors.
- Removing fuel injection lines by disconnecting hoses and tubes after capping lines to prevent contamination.
- Removing the exhaust gas recirculation cooler by draining coolant and removing hoses and mounting brackets.
- Removing the fuel injection pump by disconnecting lines and hoses after removing mounting nuts and bolts.
- Removing electronic unit injectors by disconnecting hoses after draining and capping fuel lines to prevent contamination or damage according to safety guidelines.
Caterpillar Cat 305E2 CR Mini Hydraulic Excavator (Prefix BZ5) Service Repair...jdjkskmikdkmd
The document provides instructions for removing and installing various components of a 305E2 CR Mini Hydraulic Excavator BZ5 engine, including the fuel manifold, fuel injection lines, fuel injection pump, electronic unit injector, turbocharger, and exhaust gas recirculation valve. The procedures describe removing mounting hardware and disconnecting fluid lines, hoses, and electrical connectors and installing components in the reverse order. Safety precautions are provided regarding working with high pressure fuel and hot coolant.
Caterpillar cat 305 e2 cr mini hydraulic excavator (prefix bz5) service repai...fikskkdmmd1
This document provides instructions for removing and installing various components of a 305E2 CR Mini Hydraulic Excavator engine, including:
- Removing the fuel manifold by removing bolts and lines, taking care not to damage sensors.
- Removing fuel injection lines by disconnecting hoses and tubes after capping lines to prevent contamination.
- Removing the exhaust gas recirculation cooler by draining coolant and removing hoses and mounting brackets.
- Removing the fuel injection pump by disconnecting lines and hoses and removing nuts and bolts.
- Removing electronic unit injectors by disconnecting hoses after taking safety precautions for the high pressure fuel system.
Caterpillar Cat 305E2 CR Mini Hydraulic Excavator (Prefix BZ5) Service Repair...yan77xunhao
This document provides instructions for removing and installing various components of a 305E2 CR Mini Hydraulic Excavator engine, including:
- Removing the fuel manifold by removing bolts and lines, taking care not to damage sensors.
- Removing fuel injection lines by disconnecting hoses and tubes after capping lines to prevent contamination.
- Removing the exhaust gas recirculation cooler by draining coolant and removing hoses and mounting brackets.
- Removing the fuel injection pump by disconnecting lines and hoses after removing mounting nuts and bolts.
- Removing electronic unit injectors by disconnecting hoses after draining and capping fuel lines to prevent contamination.
Caterpillar cat 305 e2 cr mini hydraulic excavator (prefix bz5) service repai...fjskekfseik
This document provides instructions for removing and installing various components of a 305E2 CR Mini Hydraulic Excavator engine, including:
- Removing the fuel manifold by removing bolts and disconnecting fuel injection lines.
- Removing fuel injection lines by disconnecting hose assemblies and removing bolts, clamps and tubes.
- Removing the exhaust gas recirculation cooler by draining coolant, removing hoses and brackets, and bolts.
- Removing the fuel injection pump by disconnecting harnesses and hoses, and removing nuts, bolts and the pump.
- Removing electronic unit injectors by disconnecting hoses after draining fuel and removing clips and hoses.
Caterpillar Cat 305.5E2 CR Mini Hydraulic Excavator (Prefix FR5) Service Repa...tuzhiyou2
The document provides instructions for removing and installing various fuel system components on a 305.5E2 CR Mini Hydraulic Excavator FR5, including the fuel manifold rail, fuel injection lines, fuel injection pump, exhaust gas recirculation cooler, and electronic unit injectors. The procedures note safety hazards and provide illustrations showing part locations and the order for removal and installation of components.
Caterpillar Cat 305.5E2 CR Mini Hydraulic Excavator (Prefix FR5) Service Repa...qfyc504378
The document provides instructions for removing and installing various components of a Caterpillar 305.5E2 CR Mini Hydraulic Excavator engine, including the fuel manifold rail, fuel injection lines, fuel injection pump, electronic unit injectors, turbocharger, and exhaust gas recirculation valve. Safety precautions are provided noting potential hazards such as high pressure fuel, sulfuric acid, and hot coolant. Procedures include removing mounting bolts, clamps, and hoses and installing components in reverse order while following torque specifications.
Caterpillar Cat 305.5E2 CR Mini Hydraulic Excavator (Prefix FR5) Service Repa...lituo39419496
This document provides instructions for removing and installing various components of a Caterpillar 305.5E2 CR Mini Hydraulic Excavator engine, including the fuel manifold rail, fuel injection lines, fuel injection pump, electronic unit injectors, turbocharger, and exhaust gas recirculation valve. Safety precautions are provided at the beginning of each section to warn technicians of potential hazards like high pressure fuel, sulfuric acid, and hot coolant when working on the engine. Detailed step-by-step procedures and diagrams guide technicians through the removal and installation process for each component.
Caterpillar Cat 305.5E2 CR Mini Hydraulic Excavator (Prefix FR5) Service Repa...fuusejkddmmd3e
The document provides instructions for removing and installing various components of a 305.5E2 CR Mini Hydraulic Excavator FR5 engine, including the fuel manifold rail, fuel injection lines, electronic unit injector, turbocharger, exhaust gas recirculation valve, and more. Each section includes detailed step-by-step instructions and accompanying illustrations. Safety warnings are provided throughout regarding hazards such as high pressure fuel, sulfuric acid, and hot coolant.
Caterpillar Cat 305.5E2 CR Mini Hydraulic Excavator (Prefix FR5) Service Repa...dujkdksmdmdm
The document provides instructions for removing and installing various components of a 305.5E2 CR Mini Hydraulic Excavator FR500001-UP engine, including the fuel manifold rail, fuel injection lines, exhaust gas recirculation cooler, fuel injection pump, and electronic unit injector. Safety precautions are provided regarding working with high pressure fuel and sulfuric acid. The procedures note removing mounting hardware and disconnecting lines, then reversing the order for installation.
Caterpillar Cat 305.5E2 CR Mini Hydraulic Excavator (Prefix FR5) Service Repa...jdksmmdmdd
The document provides instructions for removing and installing various components of a 305.5E2 CR Mini Hydraulic Excavator FR5 engine, including the fuel manifold rail, fuel injection lines, electronic unit injector, turbocharger, exhaust gas recirculation valve, and more. The steps describe draining fluids, removing bolts, clamps and other hardware, and installing components in reverse order, noting proper torque specifications for reinstallation. Safety warnings are provided throughout regarding hazards such as high pressure fuel, sulfuric acid, and hot coolant.
Caterpillar Cat 305.5E2 CR Mini Hydraulic Excavator (Prefix FR5) Service Repa...yan77xunhao
The document provides instructions for removing and installing various components of a 305.5E2 CR Mini Hydraulic Excavator FR500001-UP engine, including the fuel manifold rail, fuel injection lines, exhaust gas recirculation cooler, fuel injection pump, and electronic unit injector. Safety precautions are provided regarding working with high pressure fuel and sulfuric acid. The procedures note removing mounting hardware and disconnecting lines, then reversing the order for installation.
Caterpillar cat 305.5 e2 cr mini hydraulic excavator (prefix fr5) service rep...dikdkskmdm
The document provides instructions for removing and installing various components of a 305.5E2 CR Mini Hydraulic Excavator FR500001-UP engine, including the fuel manifold rail, fuel injection lines, exhaust gas recirculation cooler, fuel injection pump, and electronic unit injector. Safety precautions are provided regarding working with high pressure fuel and sulfuric acid. The procedures note removing fasteners and hoses in the listed order and installing components in the reverse order.
Caterpillar Cat 305.5E2 CR Mini Hydraulic Excavator (Prefix FR5) Service Repa...fujkse9didkke3
The document provides instructions for removing and installing various components of a 305.5E2 CR Mini Hydraulic Excavator FR5 engine, including the fuel manifold rail, fuel injection lines, electronic unit injector, turbocharger, exhaust gas recirculation valve, and more. The steps describe draining fluids, removing bolts, clamps and other hardware, and installing components in reverse order, noting proper torque specifications for reinstallation. Safety warnings are provided throughout regarding hazards such as high pressure fuel, sulfuric acid, and hot coolant.
Caterpillar Cat 305.5E2 CR Mini Hydraulic Excavator (Prefix FR5) Service Repa...orrf0370383
The document provides instructions for removing and installing various components of a 305.5E2 CR Mini Hydraulic Excavator FR5 engine, including the fuel manifold rail, fuel injection lines, electronic unit injector, turbocharger, exhaust gas recirculation valve, and more. The steps describe draining fluids, removing bolts, clamps and other hardware, and installing components in reverse order, noting proper torque specifications for reinstallation. Safety warnings are provided throughout regarding hazards such as high pressure fuel, sulfuric acid, and hot coolant.
Caterpillar cat 305.5 e2 cr mini hydraulic excavator (prefix fr5) service rep...cdfzxs
The document provides instructions for removing and installing various components of a 305.5E2 CR Mini Hydraulic Excavator FR5 engine, including the fuel manifold rail, fuel injection lines, electronic unit injector, turbocharger, exhaust gas recirculation valve, and more. The steps describe draining fluids, removing bolts, clamps and other hardware, and installing components in reverse order, noting proper torque specifications for reinstallation. Safety warnings are provided throughout regarding hazards such as high pressure fuel, sulfuric acid, and hot coolant.
Caterpillar cat 305.5 e2 cr mini hydraulic excavator (prefix fr5) service rep...fjjskekmsemm
The document provides instructions for removing and installing various components of a 305.5E2 CR Mini Hydraulic Excavator FR500001-UP engine, including the fuel manifold rail, fuel injection lines, exhaust gas recirculation cooler, fuel injection pump, and electronic unit injector. Safety precautions are provided regarding working with high pressure fuel and sulfuric acid. The procedures note removing fasteners and hoses in the listed order and installing components in the reverse order.
Caterpillar cat 305.5 e2 cr mini hydraulic excavator (prefix fr5) service rep...fjjskekdm
The document provides instructions for removing and installing various components of a 305.5E2 CR Mini Hydraulic Excavator FR500001-UP engine, including the fuel manifold rail, fuel injection lines, exhaust gas recirculation cooler, fuel injection pump, and electronic unit injector. Safety precautions are outlined regarding working with high pressure fuel and potential hazards.
Similar to Caterpillar Cat 305E2 CR Mini Hydraulic Excavator (Prefix DF5) Service Repair Manual (DF500001 and up).pdf (20)
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
2. Shutdown SIS
Previous Screen
Product: MINI HYD EXCAVATOR
Model: 305E2 CR MINI HYD EXCAVATOR DF5
Configuration: 305E2 CR Mini Hydraulic Excavator DF500001-UP (MACHINE) POWERED BY C2.4 Engine
Disassembly and Assembly
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Media Number -UENR7319-02 Publication Date -01/07/2018 Date Updated -01/08/2018
i06521813
Fuel Injection Lines - Remove and Install
SMCS - 1252-010
Removal Procedure
Contact with high pressure fuel may cause fluid penetration and burn
hazards. High pressure fuel spray may cause a fire hazard. Failure to
follow these inspection, maintenance and service instructions may cause
personal injury or death.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Dispose of all fluids according to local regulations and mandates.
1. Turn the fuel supply to the OFF position.
2. Turn the battery disconnect switch to the OFF position.
1/3
305E2 CR Mini Hydraulic Excavator DF500001-UP (MACHINE) POWERED BY C2...
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
3. Illustration 1 g06007993
3. Remove bolt (3) and clamp (1). Disconnect hose assembly (2).
Illustration 2 g06008011
4. Remove bolt (8) and clamps (5). Disconnect hose assembly (7).
5. Remove bolts (4) and intake throttle valve (6).
Illustration 3 g06008040
6. Remove bolt (9), bolt (11), and tube assembly (10).
Note: Cap and plug all fuel lines to prevent contaminating fuel system.
2/3
305E2 CR Mini Hydraulic Excavator DF500001-UP (MACHINE) POWERED BY C2...
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
4. Illustration 4 g06008098
7. Remove clamp (16). Disconnect hose assembly (15).
8. Remove bolt (12), bolt (14), and tube assembly (13).
Illustration 5 g06008091
9. Remove fuel injection lines (17).
Note: Cap and plug all fuel lines to prevent contaminating fuel system.
Installation Procedure
1. Install fuel injection lines (17) in the reverse order of removal.
a. Tighten the retaining nuts of fuel injection lines (17) to a torque of 25 N·m to 29 N·m
(221 lb in to 257 lb in).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Feb 2 21:30:40 UTC+0800 2020
3/3
305E2 CR Mini Hydraulic Excavator DF500001-UP (MACHINE) POWERED BY C2...
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
5. Shutdown SIS
Previous Screen
Product: MINI HYD EXCAVATOR
Model: 305E2 CR MINI HYD EXCAVATOR DF5
Configuration: 305E2 CR Mini Hydraulic Excavator DF500001-UP (MACHINE) POWERED BY C2.4 Engine
Disassembly and Assembly
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Media Number -UENR7319-02 Publication Date -01/07/2018 Date Updated -01/08/2018
i06508651
Exhaust Gas Recirculation Cooler - Remove and Install
SMCS - 1087; 108C-010
Removal Procedure
Sulfuric Acid Burn Hazard may cause serious personal injury or death.
The exhaust gas cooler may contain a small amount of sulfuric acid. The
use of fuel with sulfur levels greater than 15 ppm may increase the
amount of sulfuric acid formed. The sulfuric acid may spill from the
cooler during service of the engine. The sulfuric acid will burn the eyes,
skin and clothing on contact. Always wear the appropriate personal
protective equipment (PPE) that is noted on a material safety data sheet
(MSDS) for sulfuric acid. Always follow the directions for first aid that
are noted on a material safety data sheet (MSDS) for sulfuric acid.
Note: Plug or cap all open ports with new plugs or caps.
1. Drain the coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant -
Change" for the correct draining and filling procedures.
1/2
305E2 CR Mini Hydraulic Excavator DF500001-UP (MACHINE) POWERED BY C2...
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
6. Illustration 1 g06002439
2. Remove clamp (2) and hose assembly (1).
3. Remove clamp (8) and hose assembly (7).
4. Remove bolt (5) and bracket (4).
5. Remove bolts (6), bolts (9), and exhaust gas recirculation cooler (3).
Installation Procedure
1. Install exhaust gas recirculation cooler (3) in the reverse order of removal.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Feb 2 21:31:37 UTC+0800 2020
2/2
305E2 CR Mini Hydraulic Excavator DF500001-UP (MACHINE) POWERED BY C2...
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
7. Shutdown SIS
Previous Screen
Product: MINI HYD EXCAVATOR
Model: 305E2 CR MINI HYD EXCAVATOR DF5
Configuration: 305E2 CR Mini Hydraulic Excavator DF500001-UP (MACHINE) POWERED BY C2.4 Engine
Disassembly and Assembly
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Media Number -UENR7319-02 Publication Date -01/07/2018 Date Updated -01/08/2018
i06545892
Fuel Injection Pump - Remove and Install
SMCS - 1251-010
Removal Procedure
Start By:
a. Remove inlet manifold.
Illustration 1 g06008710
1. Disconnect harness assembly (3) (not shown).
2. Disconnect hose assembly (5).
3. Remove nuts (1), bolts (4), and fuel injection pump (2).
1/2
305E2 CR Mini Hydraulic Excavator DF500001-UP (MACHINE) POWERED BY C2...
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
8. Illustration 2 g06008731
4. Disconnect hose assembly (8) (not shown).
5. Remove bolts (6) and fuel pump (7).
Installation Procedure
1. Install fuel injection pump (7) in the reverse order of removal.
a. Tighten nuts (1) to a torque of 24 N·m to 27 N·m (212 lb in to 239 lb in).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Feb 2 21:32:33 UTC+0800 2020
2/2
305E2 CR Mini Hydraulic Excavator DF500001-UP (MACHINE) POWERED BY C2...
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
9. Shutdown SIS
Previous Screen
Product: MINI HYD EXCAVATOR
Model: 305E2 CR MINI HYD EXCAVATOR DF5
Configuration: 305E2 CR Mini Hydraulic Excavator DF500001-UP (MACHINE) POWERED BY C2.4 Engine
Disassembly and Assembly
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Media Number -UENR7319-02 Publication Date -01/07/2018 Date Updated -01/08/2018
i06546013
Electronic Unit Injector - Remove and Install
SMCS - 1290-010
Removal Procedure
Contact with high pressure fuel may cause fluid penetration and burn
hazards. High pressure fuel spray may cause a fire hazard. Failure to
follow these inspection, maintenance and service instructions may cause
personal injury or death.
NOTICE
Ensure that all adjustments and repairs that are carried out to the fuel
system are performed by authorised personnel that have the correct
training.
Before begining ANY work on the fuel system, refer to Operation and
Maintenance Manual, "General Hazard Information and High
Pressure Fuel Lines" for safety information.
Refer to Systems Operation, Testing and Adjusting Manual,
"Cleanliness of Fuel System Components" for detailed information on
the standards of cleanliness that must be observed during ALL work
on the fuel system.
1/2
305E2 CR Mini Hydraulic Excavator DF500001-UP (MACHINE) POWERED BY C2...
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
10. NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Dispose of all fluids according to local regulations and mandates.
Start By:
a. Remove fuel injection lines.
Illustration 1 g06008227
1. Remove clip (2). Disconnect hose assembly (1).
2. Remove bolt (5), clamp (4), and electronic unit injector (3).
Installation Procedure
1. Install electronic unit injector (3) in the reverse order of removal.
a. Tighten bolt (5) to a torque of 24 N·m to 27 N·m (212 lb in to 248 lb in).
Note: If new injectors are installed, refer to REHS9707 to install new injector trim
codes in the Engine ECM and to register them on-line
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Feb 2 21:33:30 UTC+0800 2020
2/2
305E2 CR Mini Hydraulic Excavator DF500001-UP (MACHINE) POWERED BY C2...
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
11. Shutdown SIS
Previous Screen
Product: MINI HYD EXCAVATOR
Model: 305E2 CR MINI HYD EXCAVATOR DF5
Configuration: 305E2 CR Mini Hydraulic Excavator DF500001-UP (MACHINE) POWERED BY C2.4 Engine
Disassembly and Assembly
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Media Number -UENR7319-02 Publication Date -01/07/2018 Date Updated -01/08/2018
i06546042
Turbocharger - Remove and Install
SMCS - 1052-010
Removal Procedure
Drain the cooling system into a suitable container for storage or disposal. Refer to Operation and
Maintenance Manual, "Cooling System Coolant (ELC) - Change".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 1 g06044516
1. Remove intake hose (1).
1/2
305E2 CR Mini Hydraulic Excavator DF500001-UP (MACHINE) POWERED BY C2...
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
12. 2. Remove muffler flange (4).
3. Disconnect intake hose (3).
Illustration 2 g06044524
4. Remove screw (5).
5. Remove return pipe (crankcase side) (6).
6. Remove turbocharger (2).
Installation Procedure
1. Install turbocharger (2) in the reverse order of removal.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Feb 2 21:34:27 UTC+0800 2020
2/2
305E2 CR Mini Hydraulic Excavator DF500001-UP (MACHINE) POWERED BY C2...
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
13. Shutdown SIS
Previous Screen
Product: MINI HYD EXCAVATOR
Model: 305E2 CR MINI HYD EXCAVATOR DF5
Configuration: 305E2 CR Mini Hydraulic Excavator DF500001-UP (MACHINE) POWERED BY C2.4 Engine
Disassembly and Assembly
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Media Number -UENR7319-02 Publication Date -01/07/2018 Date Updated -01/08/2018
i06508754
Exhaust Gas Recirculation Valve - Remove and Install
SMCS - 108N-010
Removal Procedure
Personal injury can result from hot coolant, steam and alkali.
At operating temperature, engine coolant is hot and under pressure. The
radiator and all lines to heaters or the engine contain hot coolant or
steam. Any contact can cause severe burns.
Remove cooling system pressure cap slowly to relieve pressure only
when engine is stopped and cooling system pressure cap is cool enough
to touch with your bare hand.
Do not attempt to tighten hose connections when the coolant is hot, the
hose can come off causing burns.
Cooling System Coolant Additive contains alkali. Avoid contact with
skin and eyes.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
1/4
305E2 CR Mini Hydraulic Excavator DF500001-UP (MACHINE) POWERED BY C2...
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
14. Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
Note: Refer to Specifications, "Engine Design" for non-specified engine torque values.
Illustration 1 g06002555
1. Remove bolt (1) and bolt (2).
Illustration 2 g06002560
2. Remove bolts (3).
2/4
305E2 CR Mini Hydraulic Excavator DF500001-UP (MACHINE) POWERED BY C2...
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
15. Illustration 3 g06002566
3. Remove clamp (4). Disconnect hose assembly (5).
Illustration 4 g06002585
4. Remove bolt (6). Position breather assembly (7) out of the way.
Illustration 5 g06002718
5. Remove clamp (8) . Disconnect hose assembly (9).
3/4
305E2 CR Mini Hydraulic Excavator DF500001-UP (MACHINE) POWERED BY C2...
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
16. Illustration 6 g06002734
6. Disconnect harness assembly (12) (not shown).
7. Remove bolts (10) and exhaust gas recirculation valve (11).
Installation Procedure
1. Install exhaust gas recirculation valve (11) in the reverse order of removal.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Feb 2 21:35:24 UTC+0800 2020
4/4
305E2 CR Mini Hydraulic Excavator DF500001-UP (MACHINE) POWERED BY C2...
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
17. Shutdown SIS
Previous Screen
Product: MINI HYD EXCAVATOR
Model: 305E2 CR MINI HYD EXCAVATOR DF5
Configuration: 305E2 CR Mini Hydraulic Excavator DF500001-UP (MACHINE) POWERED BY C2.4 Engine
Disassembly and Assembly
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Media Number -UENR7319-02 Publication Date -01/07/2018 Date Updated -01/08/2018
i06508499
Exhaust Manifold - Remove and Install
SMCS - 1059-010
Removal Procedure
Illustration 1 g06002252
1. Remove bolts (1) and position bracket (2) out of the way.
2. Remove bolts (3), nuts (4), and elbow (5).
1/2
305E2 CR Mini Hydraulic Excavator DF500001-UP (MACHINE) POWERED BY C2...
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
18. Illustration 2 g06002278
3. Remove clamp (10) and hose (9).
4. Remove bolt (8) and bracket (12).
5. Remove bolts (11), nuts (6), and exhaust manifold (7).
Installation Procedure
1. Install exhaust manifold (7) in the reverse order of removal.
a. Tighten bolts (3) to a torque of 24 N·m to 27 N·m (212 lb in to 239 lb in).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Feb 2 21:36:20 UTC+0800 2020
2/2
305E2 CR Mini Hydraulic Excavator DF500001-UP (MACHINE) POWERED BY C2...
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
19. Shutdown SIS
Previous Screen
Product: MINI HYD EXCAVATOR
Model: 305E2 CR MINI HYD EXCAVATOR DF5
Configuration: 305E2 CR Mini Hydraulic Excavator DF500001-UP (MACHINE) POWERED BY C2.4 Engine
Disassembly and Assembly
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Media Number -UENR7319-02 Publication Date -01/07/2018 Date Updated -01/08/2018
i06506216
Diesel Particulate Filter - Disassemble
SMCS - 108F-015
Disassemble Procedure
Wear goggles, gloves, protective clothing, and a National Institute for
Occupational Safety and Health (NIOSH) approved P95 or N95 half-
face respirator when handling a used Diesel Particulate Filter or
Catalytic Converter Muffler. Failure to do so could result in personal
injury.
The muffler, catalytic converter/muffler, and diesel particulate filter will
become extremely hot during engine operation. A hot muffler, catalytic
converter/muffler and diesel particulate filter can cause serious burns.
Allow adequate cooling time before working on or near the muffler,
catalytic converter/muffler and diesel particulate filter.
NOTICE
Do not strike any part of the assembly of the Diesel Particulate Filter
(DPF). Do not allow any object to contact the internal element of the
1/3
305E2 CR Mini Hydraulic Excavator DF500001-UP (MACHINE) POWERED BY C2...
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
20. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
21. DPF. If the internal element of the DPF becomes damaged, the
assembly must be replaced.
Illustration 1 g06001247
NOTICE
Before starting of disassembling the diesel particulate filter, put the
alignment marks on each of the parts, the diesel particulate filter, the
diesel oxidation catalyst, and the muffler.
1. Remove band clamps (1).
Illustration 2 g06001291
2. Separate muffler (2), diesel particulate filter (3), and diesel oxidation catalyst (4).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Sun Feb 2 21:37:17 UTC+0800 2020
2/3
305E2 CR Mini Hydraulic Excavator DF500001-UP (MACHINE) POWERED BY C2...
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
22. Private Network For SIS Licensees.
3/3
305E2 CR Mini Hydraulic Excavator DF500001-UP (MACHINE) POWERED BY C2...
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
23. Shutdown SIS
Previous Screen
Product: MINI HYD EXCAVATOR
Model: 305E2 CR MINI HYD EXCAVATOR DF5
Configuration: 305E2 CR Mini Hydraulic Excavator DF500001-UP (MACHINE) POWERED BY C2.4 Engine
Disassembly and Assembly
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Media Number -UENR7319-02 Publication Date -01/07/2018 Date Updated -01/08/2018
i06506718
Diesel Particulate Filter - Assemble
SMCS - 108F-016
Assemble Procedure
Wear goggles, gloves, protective clothing, and a National Institute for
Occupational Safety and Health (NIOSH) approved P95 or N95 half-
face respirator when handling a used Diesel Particulate Filter or
Catalytic Converter Muffler. Failure to do so could result in personal
injury.
NOTICE
Do not strike any part of the assembly of the Diesel Particulate Filter
(DPF). Do not allow any object to contact the internal element of the
DPF. If the internal element of the DPF becomes damaged, the
assembly must be replaced.
1/2
305E2 CR Mini Hydraulic Excavator DF500001-UP (MACHINE) POWERED BY C2...
2020/2/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...