This service manual provides technical information for maintenance and repair of several combine models including the CX5.80, CX5.90, CX6.80, and CX6.90. The manual contains sections covering the engine, transmission, axles, hydraulic and electrical systems, attachments/headers, and other major components. Technical data, functional descriptions, diagnostics, and service procedures are provided for each system.
New holland l223 tier 4 skid steer loader service repair manual [ndm474381 ]uujjfjkkkdmme
This service manual provides instructions for servicing the engine and other components of 200 Series Skid Steer Loaders and Compact Track Loaders, including removing the engine by draining fluids, disconnecting electrical connections and hoses, removing covers and guards, and using lifting equipment where needed for safety. Specific components covered include the engine, fuel system, cooling system, hydraulic system, drive system, brakes, cab climate control, electrical system, front loader attachment, and other parts. Safety warnings are provided throughout regarding hazards from fluids under pressure, hot surfaces, heavy lifting, and moving parts.
New holland cx5080 elevation combine harvesters service repair manualuujjfjkkkdmme
This document is a service manual for CNH Industrial combine harvesters and provides technical information on the machines' systems and components. It contains over 55 chapters organized into sections covering the engine, transmission, axles, hydraulics, brakes, electrical systems, attachments, feeding, threshing, separation, cleaning, and unloading systems. Each chapter provides technical data, functional descriptions, diagnostics, and service procedures for the machines' mechanical, electrical and hydraulic components.
New holland cx880 combine harvesters service repair manualuujjfjkkkdmme
The document provides an overview and component locations of the primary hydraulic power system for a New Holland agricultural vehicle. The system uses a closed-center load sensing pump to supply oil to circuits for steering, header height control, straw elevator functions, lateral flotation, reel adjustment, and unloading tube control. Key components include hydraulic pumps and motors, valves, cylinders, filters, accumulators, and manifolds.
New holland cr980 combine harvesters service repair manualuujjfjkkkdmme
This document is a repair manual for New Holland combine harvesters models CR920 through CR980. It contains sections covering all major systems of the combines from general information and safety to the engine, transmission, hydraulics, electronics, grain handling and more. The manual provides instructions for troubleshooting, overhaul, and testing procedures for technicians to safely and efficiently service and repair the equipment.
New holland c238 tier 4 compact track loader service repair manual [ncm425510...uujjfjkkkdmme
This service manual provides instructions for servicing the engine and other components of 200 Series Skid Steer Loaders and Compact Track Loaders, including removing the engine by draining fluids, disconnecting electrical connections and hoses, removing covers and guards, and using lifting equipment where needed for safety. Specific components covered include the engine, fuel system, cooling system, hydraulic system, drive system, brakes, cab climate control, electrical system, front loader attachments, and other parts. Safety warnings are provided throughout regarding hazards from fluids under pressure, hot surfaces, heavy lifting, and moving parts.
Caterpillar cat 906 h compact wheel loader (prefix sdh) service repair manual...uujjfjkkkdmme
The document provides instructions for removing and installing a fuel tank and hydraulic tank on a Caterpillar 906H compact wheel loader. The fuel tank removal procedure involves draining fuel, disconnecting hoses and electrical connections, and removing mounting bolts and straps. The installation procedure specifies connecting all hoses and electrical lines and securing the tank with straps and bolts. The hydraulic tank removal involves disconnecting hoses from the radiator and tank and removing mounting bolts.
This document provides instructions for removing and installing a radiator on a Caterpillar 906 Compact Wheel Loader. It describes draining coolant and disconnecting hoses before removing mounting bolts and removing the radiator. Reinstallation follows the removal steps in reverse order. Safety precautions are provided to avoid injury from hot fluids and released pressures.
Caterpillar cat 904 h compact wheel loader service repair manual (h4t00001 an...uujjfjkkkdmme
This document provides instructions for removing the piston pump from a 904H Compact Wheel Loader. It outlines 11 steps, which include disconnecting hoses and harnesses, attaching lifting tools to the pump, and removing mounting bolts to lift the pump from the machine. Safety precautions are provided, such as ensuring all attachments are lowered and oil is cool before removal to avoid injury from hydraulic pressure. The piston pump weighs approximately 45 kg.
New holland l223 tier 4 skid steer loader service repair manual [ndm474381 ]uujjfjkkkdmme
This service manual provides instructions for servicing the engine and other components of 200 Series Skid Steer Loaders and Compact Track Loaders, including removing the engine by draining fluids, disconnecting electrical connections and hoses, removing covers and guards, and using lifting equipment where needed for safety. Specific components covered include the engine, fuel system, cooling system, hydraulic system, drive system, brakes, cab climate control, electrical system, front loader attachment, and other parts. Safety warnings are provided throughout regarding hazards from fluids under pressure, hot surfaces, heavy lifting, and moving parts.
New holland cx5080 elevation combine harvesters service repair manualuujjfjkkkdmme
This document is a service manual for CNH Industrial combine harvesters and provides technical information on the machines' systems and components. It contains over 55 chapters organized into sections covering the engine, transmission, axles, hydraulics, brakes, electrical systems, attachments, feeding, threshing, separation, cleaning, and unloading systems. Each chapter provides technical data, functional descriptions, diagnostics, and service procedures for the machines' mechanical, electrical and hydraulic components.
New holland cx880 combine harvesters service repair manualuujjfjkkkdmme
The document provides an overview and component locations of the primary hydraulic power system for a New Holland agricultural vehicle. The system uses a closed-center load sensing pump to supply oil to circuits for steering, header height control, straw elevator functions, lateral flotation, reel adjustment, and unloading tube control. Key components include hydraulic pumps and motors, valves, cylinders, filters, accumulators, and manifolds.
New holland cr980 combine harvesters service repair manualuujjfjkkkdmme
This document is a repair manual for New Holland combine harvesters models CR920 through CR980. It contains sections covering all major systems of the combines from general information and safety to the engine, transmission, hydraulics, electronics, grain handling and more. The manual provides instructions for troubleshooting, overhaul, and testing procedures for technicians to safely and efficiently service and repair the equipment.
New holland c238 tier 4 compact track loader service repair manual [ncm425510...uujjfjkkkdmme
This service manual provides instructions for servicing the engine and other components of 200 Series Skid Steer Loaders and Compact Track Loaders, including removing the engine by draining fluids, disconnecting electrical connections and hoses, removing covers and guards, and using lifting equipment where needed for safety. Specific components covered include the engine, fuel system, cooling system, hydraulic system, drive system, brakes, cab climate control, electrical system, front loader attachments, and other parts. Safety warnings are provided throughout regarding hazards from fluids under pressure, hot surfaces, heavy lifting, and moving parts.
Caterpillar cat 906 h compact wheel loader (prefix sdh) service repair manual...uujjfjkkkdmme
The document provides instructions for removing and installing a fuel tank and hydraulic tank on a Caterpillar 906H compact wheel loader. The fuel tank removal procedure involves draining fuel, disconnecting hoses and electrical connections, and removing mounting bolts and straps. The installation procedure specifies connecting all hoses and electrical lines and securing the tank with straps and bolts. The hydraulic tank removal involves disconnecting hoses from the radiator and tank and removing mounting bolts.
This document provides instructions for removing and installing a radiator on a Caterpillar 906 Compact Wheel Loader. It describes draining coolant and disconnecting hoses before removing mounting bolts and removing the radiator. Reinstallation follows the removal steps in reverse order. Safety precautions are provided to avoid injury from hot fluids and released pressures.
Caterpillar cat 904 h compact wheel loader service repair manual (h4t00001 an...uujjfjkkkdmme
This document provides instructions for removing the piston pump from a 904H Compact Wheel Loader. It outlines 11 steps, which include disconnecting hoses and harnesses, attaching lifting tools to the pump, and removing mounting bolts to lift the pump from the machine. Safety precautions are provided, such as ensuring all attachments are lowered and oil is cool before removal to avoid injury from hydraulic pressure. The piston pump weighs approximately 45 kg.
Caterpillar cat 904 b compact wheel loader (prefix b4l) service repair manual...uujjfjkkkdmme
This document provides instructions for disassembling the piston pump of a 904B compact wheel loader. It describes 33 steps to disassemble the various components of the pump, including removing plates, shafts, seals, springs, valves, and housings. Safety precautions are provided regarding the risks of high pressure hydraulic fluid and released spring forces. Tools required for the disassembly are also listed.
Caterpillar cat 322 c ln 322cln excavator (prefix bgr) service repair manual ...uujjfjkkkdmme
This document provides instructions for disassembling the control valve on a 322C excavator. It describes removing various components like solenoid valves, fittings, seals, and spools. Cleanliness is emphasized to prevent contaminating the hydraulic system. The multi-step process includes removing bolts, plugs, springs and O-rings from components like relief valves, check valves, and housings.
Caterpillar cat 320 c u excavator (prefix pac) service repair manual (pac0000...uujjfjkkkdmme
This document provides instructions for servicing components of a 320C excavator engine, including:
- Removing and installing the flywheel housing.
- Removing and installing the crankshaft pulley.
- Removing the crankshaft front seal.
- Installing the crankshaft front seal.
- Removing the idler gear from the front gear group.
- Installing the idler gear in the front gear group.
The summaries provide the high level purpose and overview of the document sections in 3 sentences or less, as requested.
Caterpillar cat 320 c s 320cs excavator (prefix bcn) service repair manual (b...uujjfjkkkdmme
This document provides instructions for removing and installing various fuel system components on a Caterpillar 320C excavator engine, including:
- Fuel filter base
- Fuel injection lines
- Fuel injection nozzles
- Fuel shutoff solenoid
- Fuel injection pump
The procedures describe disconnecting fuel lines, removing mounting bolts and other hardware, taking care to plug openings to prevent contamination. Proper tools are listed and installation is the reverse of removal. Safety notices warn to contain fluids and keep parts clean.
Caterpillar cat 320 c excavator (prefix amc) service repair manual (amc00001 ...uujjfjkkkdmme
This document provides removal and installation instructions for various components of the heating and air conditioning system on a 320C excavator, including:
1. Actuator motors for different air dampers and controls. Removal involves disconnecting linkages and harnesses, and installation involves reconnecting them.
2. The fan speed control unit. Removal requires disconnecting the harness and removing screws, and installation is the reverse.
3. The ambient air temperature sensor. Removal requires disconnecting the harness and removing a plate, and installation is the reverse.
Caterpillar cat 320 b excavator (prefix 9kr) service repair manual (9kr00001 ...uujjfjkkkdmme
The document provides instructions for removing and installing various components on a 320B excavator, including the counterweight, fuel tank, auxiliary fuel refueling pump, and seat assembly. The counterweight removal involves disconnecting hoisting brackets or eyebolts and removing mounting bolts. Fuel tank removal requires draining fuel and disconnecting hoses and electrical connections. The auxiliary fuel pump is uninstalled by disconnecting hoses and electrical connectors and removing mounting bolts. Seat removal is accomplished by removing mounting bolts, the seatbelt, and disconnecting the cable assembly.
Caterpillar cat 320 b excavator (prefix 8es) service repair manual (8es00001 ...uujjfjkkkdmme
The document provides instructions for removing and installing track carrier rollers and track rollers on an excavator model 320B. Key steps include:
1. Releasing track tension and removing mounting bolts to access the rollers.
2. Using lifting tools, removing the rollers and disassembling internal components like seals and bearings.
3. Cleaning parts, replacing seals and bearings, and reassembling with specified end play and lubrication before reinstalling rollers and tightening tracks.
Caterpillar cat 287 c2 multi terrain loader (prefix ssb) service repair manua...uujjfjkkkdmme
This document provides disassembly instructions for a piston motor (hydrostatic) on a 287C2 Multi Terrain Loader. It lists 42 steps to fully disassemble the piston motor and associated components. The steps include removing bolts, seals, springs, spools, plugs, valves, bearings, gears, and other parts using various specialized tools. Dismantling the piston motor exposes the internal workings for repair or replacement of worn parts.
Caterpillar cat 287 c multi terrain loader (prefix mas) service repair manual...uujjfjkkkdmme
This document provides instructions for removing a piston motor (hydrostatic) from a 287C Multi Terrain Loader. The steps include: releasing system pressure, removing the track and track drive, disconnecting hoses and harnesses, and using lifting tools to remove the track drive assembly which contains the piston motor. Identification marks should be put on disconnected parts to aid reinstallation.
Caterpillar cat 287 b multi terrain loader (prefix zsa) service repair manual...uujjfjkkkdmme
This document provides instructions for removing and disassembling the piston pump from a 287B Multi Terrain Loader. It describes:
1) Disconnecting various hoses and removing mounting bolts to detach the pump.
2) Separating the pump housing from the pump body and removing internal components like seals, plates, and valves.
3) Disassembling the pump further by removing the head, port plate, relief valves, and rotating group to access the pistons inside.
Safety notices are included and tools required are listed to completely disassemble the pump for repair or replacement.
Caterpillar cat 287 multi terrain loader (prefix cny) service repair manual (...uujjfjkkkdmme
This document provides instructions for removing and installing the vertical lift linkage on a 287 Multi Terrain Loader. The removal process involves releasing hydraulic pressure, removing retaining rings and pin assemblies, disconnecting hoses and harness assemblies, and lifting off the lift arms. The installation is the reverse of removal. Safety precautions are provided to prevent injury from hydraulic pressure and contain fluids.
This document provides instructions for disassembling and assembling components of the fuel injection system for a 3406 vehicular engine used in 245 excavators. The document describes how to disassemble and assemble the fuel injection pump housing by removing pumps, gears, and other internal components. It also provides instructions for removing and installing the inlet manifold, aftercooler, and related components. The purpose is to repair or replace parts while maintaining proper installation and alignment of components.
Case ih stx450 steiger tractor service repair manual pin jee0102001 and afteruujjfjkkkdmme
The document provides instructions for removing and installing the engine on STX Steiger tractors. It is a 12-step process for removal that includes draining fluids, disconnecting wiring and hoses, and using an overhead hoist to lift the engine out of the tractor. The 13-step installation process reverses these steps, lowering the engine back into place and reconnecting all components. Safety warnings are provided throughout regarding working around heavy components, hot or pressurized fluids, and ensuring the engine is properly supported during removal and installation.
Case ih stx440 tractor service repair manualuujjfjkkkdmme
This document provides safety warnings and instructions for removing and installing an engine. It contains 51 steps to remove the engine, which include disconnecting batteries, draining coolant, removing hoses, wires, and other components. It then lists 40 steps to reinstall the engine, reversing the removal process and reconnecting all components. The purpose is to provide a detailed procedure for safely removing and installing an engine.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Caterpillar cat 904 b compact wheel loader (prefix b4l) service repair manual...uujjfjkkkdmme
This document provides instructions for disassembling the piston pump of a 904B compact wheel loader. It describes 33 steps to disassemble the various components of the pump, including removing plates, shafts, seals, springs, valves, and housings. Safety precautions are provided regarding the risks of high pressure hydraulic fluid and released spring forces. Tools required for the disassembly are also listed.
Caterpillar cat 322 c ln 322cln excavator (prefix bgr) service repair manual ...uujjfjkkkdmme
This document provides instructions for disassembling the control valve on a 322C excavator. It describes removing various components like solenoid valves, fittings, seals, and spools. Cleanliness is emphasized to prevent contaminating the hydraulic system. The multi-step process includes removing bolts, plugs, springs and O-rings from components like relief valves, check valves, and housings.
Caterpillar cat 320 c u excavator (prefix pac) service repair manual (pac0000...uujjfjkkkdmme
This document provides instructions for servicing components of a 320C excavator engine, including:
- Removing and installing the flywheel housing.
- Removing and installing the crankshaft pulley.
- Removing the crankshaft front seal.
- Installing the crankshaft front seal.
- Removing the idler gear from the front gear group.
- Installing the idler gear in the front gear group.
The summaries provide the high level purpose and overview of the document sections in 3 sentences or less, as requested.
Caterpillar cat 320 c s 320cs excavator (prefix bcn) service repair manual (b...uujjfjkkkdmme
This document provides instructions for removing and installing various fuel system components on a Caterpillar 320C excavator engine, including:
- Fuel filter base
- Fuel injection lines
- Fuel injection nozzles
- Fuel shutoff solenoid
- Fuel injection pump
The procedures describe disconnecting fuel lines, removing mounting bolts and other hardware, taking care to plug openings to prevent contamination. Proper tools are listed and installation is the reverse of removal. Safety notices warn to contain fluids and keep parts clean.
Caterpillar cat 320 c excavator (prefix amc) service repair manual (amc00001 ...uujjfjkkkdmme
This document provides removal and installation instructions for various components of the heating and air conditioning system on a 320C excavator, including:
1. Actuator motors for different air dampers and controls. Removal involves disconnecting linkages and harnesses, and installation involves reconnecting them.
2. The fan speed control unit. Removal requires disconnecting the harness and removing screws, and installation is the reverse.
3. The ambient air temperature sensor. Removal requires disconnecting the harness and removing a plate, and installation is the reverse.
Caterpillar cat 320 b excavator (prefix 9kr) service repair manual (9kr00001 ...uujjfjkkkdmme
The document provides instructions for removing and installing various components on a 320B excavator, including the counterweight, fuel tank, auxiliary fuel refueling pump, and seat assembly. The counterweight removal involves disconnecting hoisting brackets or eyebolts and removing mounting bolts. Fuel tank removal requires draining fuel and disconnecting hoses and electrical connections. The auxiliary fuel pump is uninstalled by disconnecting hoses and electrical connectors and removing mounting bolts. Seat removal is accomplished by removing mounting bolts, the seatbelt, and disconnecting the cable assembly.
Caterpillar cat 320 b excavator (prefix 8es) service repair manual (8es00001 ...uujjfjkkkdmme
The document provides instructions for removing and installing track carrier rollers and track rollers on an excavator model 320B. Key steps include:
1. Releasing track tension and removing mounting bolts to access the rollers.
2. Using lifting tools, removing the rollers and disassembling internal components like seals and bearings.
3. Cleaning parts, replacing seals and bearings, and reassembling with specified end play and lubrication before reinstalling rollers and tightening tracks.
Caterpillar cat 287 c2 multi terrain loader (prefix ssb) service repair manua...uujjfjkkkdmme
This document provides disassembly instructions for a piston motor (hydrostatic) on a 287C2 Multi Terrain Loader. It lists 42 steps to fully disassemble the piston motor and associated components. The steps include removing bolts, seals, springs, spools, plugs, valves, bearings, gears, and other parts using various specialized tools. Dismantling the piston motor exposes the internal workings for repair or replacement of worn parts.
Caterpillar cat 287 c multi terrain loader (prefix mas) service repair manual...uujjfjkkkdmme
This document provides instructions for removing a piston motor (hydrostatic) from a 287C Multi Terrain Loader. The steps include: releasing system pressure, removing the track and track drive, disconnecting hoses and harnesses, and using lifting tools to remove the track drive assembly which contains the piston motor. Identification marks should be put on disconnected parts to aid reinstallation.
Caterpillar cat 287 b multi terrain loader (prefix zsa) service repair manual...uujjfjkkkdmme
This document provides instructions for removing and disassembling the piston pump from a 287B Multi Terrain Loader. It describes:
1) Disconnecting various hoses and removing mounting bolts to detach the pump.
2) Separating the pump housing from the pump body and removing internal components like seals, plates, and valves.
3) Disassembling the pump further by removing the head, port plate, relief valves, and rotating group to access the pistons inside.
Safety notices are included and tools required are listed to completely disassemble the pump for repair or replacement.
Caterpillar cat 287 multi terrain loader (prefix cny) service repair manual (...uujjfjkkkdmme
This document provides instructions for removing and installing the vertical lift linkage on a 287 Multi Terrain Loader. The removal process involves releasing hydraulic pressure, removing retaining rings and pin assemblies, disconnecting hoses and harness assemblies, and lifting off the lift arms. The installation is the reverse of removal. Safety precautions are provided to prevent injury from hydraulic pressure and contain fluids.
This document provides instructions for disassembling and assembling components of the fuel injection system for a 3406 vehicular engine used in 245 excavators. The document describes how to disassemble and assemble the fuel injection pump housing by removing pumps, gears, and other internal components. It also provides instructions for removing and installing the inlet manifold, aftercooler, and related components. The purpose is to repair or replace parts while maintaining proper installation and alignment of components.
Case ih stx450 steiger tractor service repair manual pin jee0102001 and afteruujjfjkkkdmme
The document provides instructions for removing and installing the engine on STX Steiger tractors. It is a 12-step process for removal that includes draining fluids, disconnecting wiring and hoses, and using an overhead hoist to lift the engine out of the tractor. The 13-step installation process reverses these steps, lowering the engine back into place and reconnecting all components. Safety warnings are provided throughout regarding working around heavy components, hot or pressurized fluids, and ensuring the engine is properly supported during removal and installation.
Case ih stx440 tractor service repair manualuujjfjkkkdmme
This document provides safety warnings and instructions for removing and installing an engine. It contains 51 steps to remove the engine, which include disconnecting batteries, draining coolant, removing hoses, wires, and other components. It then lists 40 steps to reinstall the engine, reversing the removal process and reconnecting all components. The purpose is to provide a detailed procedure for safely removing and installing an engine.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
10. INTRODUCTION
Basic instructions - How to use and navigate through this Manual
Technical information
This manual has been produced by a new technical information system. This new system is designed to deliver
technical information electronically through Web delivery (eTim), DVD and in paper manuals. A coding system called
SAP has been developed to link the technical information to other Product Support functions, e.g., Warranty.
Technical information is written to support the maintenance and service of the functions or systems on a customer's
machine. When a customer has a concern on his machine it is usually because a function or system on his machine
is not working at all, is not working efficiently, or is not responding correctly to his commands. When you refer to
the technical information in this manual to resolve that customer's concern, you will find all the information classified
using the SAP coding, according to the functions or systems on that machine. Once you have located the technical
information for that function or system then you will find all the mechanical, electrical or hydraulic devices, compo-
nents, assemblies and sub assemblies for that function or system. You will also find all the types of information that
have been written for that function or system, the technical data (specifications), the functional data (how it works),
the diagnostic data (fault codes and troubleshooting) and the service data (remove, install adjust, etc.).
By integrating SAP coding into technical information, you will be able to search and retrieve just the right piece of
technical information you need to resolve that customer's concern on his machine. This is made possible by attaching
3 categories to each piece of technical information during the authoring process.
The first category is the Location, the second category is the Information Type and the third category is the Product:
• LOCATION - is the component or function on the machine, that the piece of technical information is going to describe
e.g. Fuel tank.
• INFORMATION TYPE - is the piece of technical information that has been written for a particular component or
function on the machine e.g. Capacity would be a type of Technical Data that would describe the amount of fuel
held by the Fuel tank.
• PRODUCT - is the model for which the piece of technical information is written.
Every piece of technical information will have those 3 categories attached to it. You will be able to use any combination
of those categories to find the right piece of technical information you need to resolve that customer's concern on his
machine.
That information could be:
• the description of how to remove the cylinder head
• a table of specifications for a hydraulic pump
• a fault code
• a troubleshooting table
• a special tool
51431545 08/02/2018
3
11. INTRODUCTION
How to use this manual
This manual is divided into Sections. Each Section is then divided into Chapters. Contents pages are included at the
beginning of the manual, then inside every Section and inside every Chapter. An alphabetical Index is included at the
end of a Chapter. Page number references are included for every piece of technical information listed in the Chapter
Contents or Chapter Index.
Each Chapter is divided into four Information types:
• Technical Data (specifications) for all the mechanical, electrical or hydraulic devices, components and, assemblies.
• Functional Data (how it works) for all the mechanical, electrical or hydraulic devices, components and assemblies.
• Diagnostic Data (fault codes, electrical and hydraulic troubleshooting) for all the mechanical, electrical or hydraulic
devices, components and assemblies.
• Service Data (remove disassembly, assemble, install) for all the mechanical, electrical or hydraulic devices, com-
ponents and assemblies.
Sections
Sections are grouped according to the main functions or a systems on the machine. Each Section is identified by a
number 00, 35, 55, etc. The amount of Sections included in the manual will depend on the type and function of the
machine that the manual is written for. Each Section has a Contents page listed in alphabetic/numeric order. This
table illustrates which Sections could be included in a manual for a particular product.
PRODUCT
Tractors
Vehicles with working arms: backhoes,
excavators, skid steers, ….
Combines, forage harvesters, balers, ….
Seeding, planting, floating, spraying
equipment, ….
SECTION Mounted equipment and tools, ….
00 - Maintenance
05 - Machine completion and equipment
10 - Engine
14 - Main gearbox and drive
18 - Clutch
21 - Transmission
23 - Four wheel drive system
25 - Front axle system
27 - Rear axle system
29 - Hydrostatic drive
31 - Implement power take-off
33 - Brakes and controls
35 - Hydraulic systems
36 - Pneumatic system
37 - Hitches, drawbars and implement couplings
39 - Frames and ballasting
41 - Steering
44 - Wheels
46 - Steering clutches
48 - Tracks and track suspension
50 - Cab climate control
55 - Electrical systems
56 - Grape harvester shaking
58 - Attachments/headers
60 - Product feeding
61 - Metering system
62 - Pressing - Bale formation
51431545 08/02/2018
4
12. INTRODUCTION
63 - Chemical applicators
64 - Chopping
66 - Threshing
68 - Tying/Wrapping/Twisting
69 - Bale wagons
70 - Ejection
71 - Lubrication system
72 - Separation
73 - Residue handling
74 - Cleaning
75 - Soil preparation/Finishing
76 - Secondary cleaning / Destemmer
77 - Seeding
78 - Spraying
79 - Planting
80 - Crop storage / Unloading
82 - Front loader and bucket
83 - Telescopic single arm
84 - Booms, dippers and buckets
86 - Dozer blade and arm
88 - Accessories
89 - Tools
90 - Platform, cab, bodywork and decals
51431545 08/02/2018
5
13. INTRODUCTION
Safety rules
Personal safety
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible death or injury.
Throughout this manual you will find the signal words DANGER, WARNING, and CAUTION followed by special in-
structions. These precautions are intended for the personal safety of you and those working with you.
Read and understand all the safety messages in this manual before you operate or service the machine.
DANGER indicates a hazardous situation that, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
FAILURE TO FOLLOW DANGER, WARNING, AND CAUTION MESSAGES COULD RESULT
IN DEATH OR SERIOUS INJURY.
Machine safety
NOTICE: Notice indicates a situation that, if not avoided, could result in machine or property damage.
Throughout this manual you will find the signal word Notice followed by special instructions to prevent machine or
property damage. The word Notice is used to address practices not related to personal safety.
Information
NOTE: Note indicates additional information that clarifies steps, procedures, or other information in this manual.
Throughout this manual you will find the word Note followed by additional information about a step, procedure, or
other information in the manual. The word Note is not intended to address personal safety or property damage.
51431545 08/02/2018
12
14. SERVICE MANUAL
Engine
CX5.80 FPT NEF 6 STAGE IV, CX5.90 FPT NEF 6 STAGE IV, CX5.90 FPT NEF
6 TIER 3, CX5.90 Hillside FPT NEF 6 STAGE IV, CX5.90 Laterale FPT NEF 6
TIER 4B (FINAL) AND STAGE IV, CX6.80 FPT NEF 6 STAGE IV, CX6.80 FPT
NEF 6 TIER 3, CX6.90 FPT CURSOR 9 STAGE IV, CX6.90 FPT CURSOR 9
TIER 3, CX6.90 FPT CURSOR 9 TIER 3, CX6.90 Laterale FPT CURSOR 9 TIER
4B (FINAL) AND STAGE IV
51431545 08/02/2018
10
15. Engine - Selective Catalytic Reduction (SCR) exhaust treatment
Diesel Exhaust Fluid (DEF)/AdBlue®/ARLA tank - Remove
CX5.80 FPT NEF 6 STAGE IV
CX5.90 FPT NEF 6 STAGE IV
CX5.90 Hillside FPT NEF 6 STAGE IV
CX5.90 Laterale FPT NEF 6 TIER 4B (FINAL) AND STAGE IV
CX6.80 FPT NEF 6 STAGE IV
CX6.90 FPT CURSOR 9 STAGE IV
CX6.90 Laterale FPT CURSOR 9 TIER 4B (FINAL) AND STAGE IV
NOTE: It is required to remove the rear right-hand side
shield (1) to gain access to the DEF/AdBlue® tank.
The shield (1) is secured to the machine frame at four lo-
cations (A), (B), (C) and (D).
ZEIL14CXM0123AZ 1
NOTE: Access to some of the hardware is through the
straw walker inspection cover (2).
ZEIL14CXM0131AA 2
CAUTION
Heavy object!
The component is heavy. Use care not to drop
the component when installing, removing, or
handling.
Failure to comply could result in minor or mod-
erate injury.
C0095A
1. Use a suitable hoist and secure the rear right-hand side
shield (1).
ZEIL14CXM0123AA 3
51431545 08/02/2018
10.1 [10.500] / 3
16. Engine - Selective Catalytic Reduction (SCR) exhaust treatment
2. Remove the hardware (3) and (4) from the rear right-
hand side shield at the location (A) (see figure 1).
ZEIL14CXM0124AA 4
3. Remove the hardware (5) and the cover plate (6) at the
location (B) (see figure 1).
NOTE: Get access to the hardware (5) through the cover
(2) (see figure 2).
ZEIL14CXM0125AA 5
4. Remove the hardware (7) from the rear right-hand side
shield (1) at the location (C) (see figure 1).
ZEIL14CXM0127AA 6
5. Remove the hardware (8) from the rear right-hand side
shield (1) at the location (D) (see figure 1).
6. Remove the rear right-hand side shield (1).
ZEIL14CXM0126AA 7
51431545 08/02/2018
10.1 [10.500] / 4
17. Engine - Selective Catalytic Reduction (SCR) exhaust treatment
7. On the DEF/AdBlue® tank (9), loosen the clamp (10)
and remove the cover (11).
8. Disconnect the DEF/AdBlue® line (12).
ZEIL14CXM0128AA 8
9. Disconnect the electrical connector (13).
10. Mark and disconnect the DEF/AdBlue® lines (14) and
(15).
ZEIL14CXM0129AA 9
11. On the DEF/AdBlue® tank (9), remove the hardware
(16).
NOTE: Get access to the hardware (16) through the straw
walker inspection cover (2) (see figure 2).
ZEIL14CXM0130AA 10
CAUTION
Heavy object!
The component is heavy. Use care not to drop
the component when installing, removing, or
handling.
Failure to comply could result in minor or mod-
erate injury.
C0095A
12. Secure the DEF/AdBlue® tank (9) with a suitable fork-
lift and slings.
13. Support the DEF/AdBlue® tank (9) and remove the
hardware (17).
14. Slowly remove the DEF/AdBlue® tank (9) from the
machine frame.
ZEIL14CXM0132AA 11
51431545 08/02/2018
10.1 [10.500] / 5
18. Engine - Selective Catalytic Reduction (SCR) exhaust treatment
Diesel Exhaust Fluid (DEF)/AdBlue®/ARLA tank - Install
CX5.80 FPT NEF 6 STAGE IV
CX5.90 FPT NEF 6 STAGE IV
CX5.90 Hillside FPT NEF 6 STAGE IV
CX5.90 Laterale FPT NEF 6 TIER 4B (FINAL) AND STAGE IV
CX6.80 FPT NEF 6 STAGE IV
CX6.90 FPT CURSOR 9 STAGE IV
CX6.90 Laterale FPT CURSOR 9 TIER 4B (FINAL) AND STAGE IV
CAUTION
Heavy object!
The component is heavy. Use care not to drop
the component when installing, removing, or
handling.
Failure to comply could result in minor or mod-
erate injury.
C0095A
1. Use a suitable forklift and install the DEF/AdBlue® tank
(1) on the machine frame.
2. Support the DEF/AdBlue® tank (1) and install the hard-
ware (2). ZEIL14CXM0132AA 1
3. Open the straw walker inspection cover (3).
ZEIL14CXM0131AA 2
4. Install the hardware (4) through the straw walker in-
spection cover (3) (see figure 2).
ZEIL14CXM0130AA 3
51431545 08/02/2018
10.1 [10.500] / 6
19. Engine - Selective Catalytic Reduction (SCR) exhaust treatment
5. Connect the electrical connector (5).
6. Connect the DEF/AdBlue® lines (6) and (7).
NOTE: Use the marks previously applied.
ZEIL14CXM0129AA 4
7. Install the cover (8) and tighten the clamp (9).
8. Install the DEF/AdBlue® line (10).
ZEIL14CXM0128AA 5
CAUTION
Heavy object!
The component is heavy. Use care not to drop
the component when installing, removing, or
handling.
Failure to comply could result in minor or mod-
erate injury.
C0095A
9. Use a suitable hoist and align the rear right-hand side
shield (11) to the machine frame.
ZEIL14CXM0123AA 6
10. Install the upper left-hand side of the shield (11) on
the machine frame. Use the hardware (12). Do not
tighten yet.
ZEIL14CXM0126AA 7
51431545 08/02/2018
10.1 [10.500] / 7
20. Engine - Selective Catalytic Reduction (SCR) exhaust treatment
11. Install the upper right-hand side of the shield (11) on
the machine frame. Use the cover plate (13) and the
hardware (14). Do not tighten yet.
NOTE: Get access to the hardware (14) through the straw
walker inspection cover (3) (see figure 2).
ZEIL14CXM0125AA 8
12. Install the lower right-hand side of the shield (11) on
the machine frame. Use the hardware (15) and (16).
Do not tighten yet.
ZEIL14CXM0124AA 9
13. Install the lower left-hand side of the shield (11) on the
machine frame. Use the hardware (17).
14. Tighten all the hardware.
ZEIL14CXM0127AA 10
51431545 08/02/2018
10.1 [10.500] / 8
21. Engine - Selective Catalytic Reduction (SCR) exhaust treatment
Diesel Exhaust Fluid (DEF)/AdBlue®/ARLA filters - Service
instruction
CX5.80 FPT NEF 6 STAGE IV
CX5.90 FPT NEF 6 STAGE IV
CX5.90 Hillside FPT NEF 6 STAGE IV
CX5.90 Laterale FPT NEF 6 TIER 4B (FINAL) AND STAGE IV
CX6.80 FPT NEF 6 STAGE IV
CX6.90 FPT CURSOR 9 STAGE IV
CX6.90 Laterale FPT CURSOR 9 TIER 4B (FINAL) AND STAGE IV
Main filter
1. On the supply module (1). Remove the filter cover (2),
turn counter-clockwise.
NOTE: Required tool : 27 mm wrench.
ZEIL15TC00307AA 1
2. Remove the equalizing element (3).
ZEIL15TC00308AA 2
3. Check the color of the filter (4) inside.
ZEIL15TC00309AA 3
51431545 08/02/2018
10.1 [10.500] / 9
22. Engine - Selective Catalytic Reduction (SCR) exhaust treatment
4. Choose the correct side of the tool (5) that comes with
the replacement filter.
• (B) side for black filter.
• (G) side for grey filter.
ZEIL15TC00310AA 4
5. Insert the correct side of the tool (5) into the filter (4)
until a click is noticed.
6. Pull out the filter (4) with the tool (5) by hand. If nec-
essary insert a screwdriver in the slot of the tool (5) to
help extract the filter (4).
ZEIL15TC00311AA 5
7. Clean functional surfaces indicated by the arrow with
clean water only.
NOTE: Protect the filter chamber from contamination and
particles.
8. Lubricate the O-rings (6) with MOBIL VELOCITE™ NO. 6
OIL and insert the new filter (4) into the supply module
(1).
ZEIL15TC00312AA 6
9. Insert the new equalizing element (3).
ZEIL15TC00308AA 7
51431545 08/02/2018
10.1 [10.500] / 10
23. Engine - Selective Catalytic Reduction (SCR) exhaust treatment
10. On the supply module (1). Install the filter cover (2),
clockwise. Torque to 15 – 25 N·m (132.8 – 221 lb in).
ZEIL15TC00307AA 8
In-line filter
11. Remove the cover (2) from the housing (1).
NOTE: Required tools: 24 mm and 27 mm wrench.
ZEIL16TC00023AA 9
12. Remove the spacer (3) from the housing (1).
13. Remove the filter (4) from the cover (2).
ZEIL16TC00003AA 10
14. Clean the housing (1), the spacer (3) and the cover
(2) with clean water only.
15. Check the O-ring (5) and the O-ring (6) for damage,
replace if necessary.
ZEIL16TC00003AZ 11
51431545 08/02/2018
10.1 [10.500] / 11
24. Engine - Selective Catalytic Reduction (SCR) exhaust treatment
16. Install the new filter (4) on the cover (2).
17. Install the spacer (3) inside the housing (1).
ZEIL16TC00003AA 12
18. Install the cover (2) on the housing (1). Torque to 10
– 14 N·m (7.4 – 10 lb ft).
ZEIL16TC00023AA 13
51431545 08/02/2018
10.1 [10.500] / 12
25. Engine - Engine air compressor
Air compressor - Remove
CX5.80 FPT NEF 6 STAGE IV
CX5.90 FPT NEF 6 STAGE IV
CX5.90 FPT NEF 6 TIER 3
CX5.90 Hillside FPT NEF 6 STAGE IV
CX5.90 Laterale FPT NEF 6 TIER 4B (FINAL) AND STAGE IV
CX6.80 FPT NEF 6 STAGE IV
CX6.80 FPT NEF 6 TIER 3
1. Bleed the air from the system by opening the drain (2)
at the bottom of the air reservoir (1).
ZEIL06CS0207A0B 1
2. Loosen the retaining strap (1) and remove the air inlet
pipe (2) from the air compressor (3).
NOTE: Protect the air inlet and outlet ports from dirt
ingress.
3. Loosen the connection (4) to remove the hose (5) from
the air compressor (3).
ZEIL06CS0082A0B 2
4. Drain sufficient coolant from the engine cooling system
to allow removal of the coolant lines.
5. Loosen the connection (6).
ZEIL06CS0083A0B 3
51431545 08/02/2018
10.3 [10.450] / 9
26. Engine - Engine air compressor
6. Loosen the connection (7).
7. Remove the four bolts (8) to remove the support (9).
ZEIL06CS0084A0B 4
8. Remove the two nuts (10) to remove the air compressor
(3) from the engine.
ZEIL06CS0085A0B 5
51431545 08/02/2018
10.3 [10.450] / 10
27. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
28. Engine - Engine air compressor
Air compressor - Install
CX5.80 FPT NEF 6 STAGE IV
CX5.90 FPT NEF 6 STAGE IV
CX5.90 FPT NEF 6 TIER 3
CX5.90 Hillside FPT NEF 6 STAGE IV
CX5.90 Laterale FPT NEF 6 TIER 4B (FINAL) AND STAGE IV
CX6.80 FPT NEF 6 STAGE IV
CX6.80 FPT NEF 6 TIER 3
1. Install the air compressor (3) on the engine and tighten
the two nuts (10).
ZEIL06CS0085A0B 1
NOTE: Make sure that the O-ring (11) is positioned well. If
necessary apply grease.
ZEIL06CS0086A0B 2
2. Install the support (9) with the four bolts (8).
3. Install the tube and tighten the connection (7).
ZEIL06CS0084A0B 3
51431545 08/02/2018
10.3 [10.450] / 11
29. Engine - Engine air compressor
4. Install the tube and tighten the connection (6).
ZEIL06CS0083A0B 4
5. Install the hose (5) on the air compressor (3) and
tighten the connection (4).
6. Install the pipe (2) on the air compressor (3) and tighten
the retaining strap (1).
ZEIL06CS0082A0B 5
7. Close the drain (2) at the bottom of the reservoir (1).
8. Add engine coolant to the cooling system, refer to the
Operator’s Manual for more details.
9. Start the engine to charge the system with air. Allow the
air system to build up pressure to the governor cutout.
Stop the engine and use a soap and water solution at
the connection points to check for air leaks. Make any
necessary repairs.
ZEIL06CS0207A0B 6
51431545 08/02/2018
10.3 [10.450] / 12
30. Engine - Engine air compressor
Air compressor - Remove
CX6.90 FPT CURSOR 9 STAGE IV
CX6.90 FPT CURSOR 9 TIER 3 ---
CX6.90 Laterale FPT CURSOR 9 TIER 4B (FINAL) AND STAGE IV
1. Bleed the air from the system by opening the drain (2)
at the bottom of the air reservoir (1).
ZEIL06CS0207A0B 1
2. Remove the hose (3) from the fitting in the compressor.
NOTE: Protect the air inlet and outlet ports from dirt
ingress.
3. Disconnect the small tube (4) from the fitting in the com-
pressor.
4. Loosen the clamp (5) and remove the elbow (6) from
the fitting in the compressor.
ZEIL11CX0671A0B 2
5. Drain sufficient coolant from the engine cooling system
to allow removal of the coolant lines.
6. Remove the coolant lines (7) and (8).
7. Remove the air compressor pump (10) from the engine
by removing the three Allen screws (9). Make sure to
capture the seals as the pump (10) is pulled away from
the engine.
ZEIL11CX0671A0C 3
51431545 08/02/2018
10.3 [10.450] / 13
31. Engine - Engine air compressor
Air compressor - Install
CX6.90 FPT CURSOR 9 STAGE IV
CX6.90 FPT CURSOR 9 TIER 3 ---
CX6.90 Laterale FPT CURSOR 9 TIER 4B (FINAL) AND STAGE IV
1. If necessary, install the drive gear to the compressor
pump (10) and torque the nut to 135 – 145 Nm (99.6 –
106.9 lb ft).
2. Install the O–ring seals in the recess of the mounting
flange, apply some multi-purpose grease. Mount the
air compressor pump (10) on to the engine using the
three Allen screws (9). Ensure that the gears mesh
correctly, and the seals are installed.
3. Install the coolant lines (7) and (8) on the air compres-
sor pump (10).
ZEIL11CX0671A0C 1
4. Install the elbow (6) on the air compressor pump using
the collar (5).
5. Install the small tube (4) on to the fitting in the air com-
pressor pump.
6. Install the hose (3) on the fitting in the air compressor
pump.
ZEIL11CX0671A0B 2
7. Close the drain (2) at the bottom of the air reservoir (1).
8. Add engine coolant to the cooling system, refer to the
Operator’s Manual for more details.
9. Start the engine to charge the system with air. Allow the
air system to build up pressure to the governor cutout.
Stop the engine and use a soap and water solution at
the connection points to check for air leaks. Make any
necessary repairs.
ZEIL06CS0207A0B 3
51431545 08/02/2018
10.3 [10.450] / 14
32. Engine - Engine air compressor
Compressed air tank Relief valve - Remove
CX5.80 FPT NEF 6 STAGE IV
CX5.90 FPT NEF 6 STAGE IV
CX5.90 FPT NEF 6 TIER 3
CX5.90 Hillside FPT NEF 6 STAGE IV
CX5.90 Laterale FPT NEF 6 TIER 4B (FINAL) AND STAGE IV
CX6.80 FPT NEF 6 STAGE IV
CX6.80 FPT NEF 6 TIER 3
1. Bleed the air from the system by opening the drain (2)
at the bottom of the air reservoir (1).
ZEIL06CS0207A0B 1
2. Loosen and disconnect the air line fittings (1) from the
pressure relief valve (2).
3. Loosen the collar (5) and disconnect the tube from the
pressure relief valve (2).
4. Remove the pressure relief valve (2) by removing the
bolts (4).
ZEIL11CX0669A0B 2
51431545 08/02/2018
10.3 [10.450] / 15
33. Engine - Engine air compressor
Compressed air tank Relief valve - Install
CX5.80 FPT NEF 6 STAGE IV
CX5.90 FPT NEF 6 STAGE IV
CX5.90 FPT NEF 6 TIER 3
CX5.90 Hillside FPT NEF 6 STAGE IV
CX5.90 Laterale FPT NEF 6 TIER 4B (FINAL) AND STAGE IV
CX6.80 FPT NEF 6 STAGE IV
CX6.80 FPT NEF 6 TIER 3
1. Install the pressure relief valve (2) on its support using
the bolts (4), the lock washers and the nuts.
2. Connect and tighten the air line tube fittings (1) to the
pressure relief valve (2).
3. Install the tube using the collar (5) to the pressure relief
valve (2).
ZEIL11CX0669A0B 1
4. Close the drain (2) at the bottom of the air reservoir (1).
ZEIL06CS0207A0B 2
51431545 08/02/2018
10.3 [10.450] / 16