The document provides instructions for removing and installing a flywheel on a Caterpillar C3.3B engine. It lists the required tools which include guide studs and a link bracket. The removal procedure involves removing bolts from the flywheel, installing guide studs into the crankshaft, and using a lifting device to remove the flywheel. Instructions are given to inspect the flywheel and ring gear upon removal and replace any worn or damaged components.
Caterpillar cat 279 d compact track loader (prefix rcx) service repair manual...fjjskekskem
This document provides instructions for removing and installing various engine components on a 279D Compact Track Loader with a C3.3B engine, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening bolts, removing springs and other parts, checking for wear and damage, and installing components in reverse order. Safety precautions are provided regarding contained fluids and sudden spring release.
Caterpillar cat 279 d compact track loader (prefix rcx) service repair manual...fujsjefskekfksem
This document provides instructions for removing and installing various engine components on a 279D Compact Track Loader including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening bolts/screws, removing parts, installing replacement parts in the reverse order, and noting important safety information and checks to perform. Torque specifications are provided where relevant.
Caterpillar cat 279 d compact track loader (prefix rcx) service repair manual...fhshefjjskefkem
This document provides instructions for removing and installing various engine components on a 279D Compact Track Loader with a C3.3B engine, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening bolts, removing parts, inspecting components for wear or damage, and installing parts in the reverse order of removal while applying grease or installing new gaskets as specified. Safety notices are included to contain fluids and wear protective equipment.
Caterpillar cat 279 d compact track loader (prefix rcx) service repair manual...ujfjdkkmsme
This document provides instructions for removing and installing various engine components on a 279D Compact Track Loader with a C3.3B engine, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening bolts, removing springs and other parts, checking for wear and damage, and installing components in reverse order. Safety precautions are provided regarding contained fluids and sudden spring release.
Caterpillar cat 279 d compact track loader (prefix rcx) service repair manual...ufjjjskkmsmed
This document provides instructions for removing and installing various engine components on a 279D Compact Track Loader with a C3.3B engine, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening bolts, removing parts, inspecting components, and installing parts in the reverse order of removal while following safety precautions. Torque specifications and required tools are provided where needed.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...tengtui535
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening specific bolts and components in a numbered list. Safety precautions are provided, and technicians are instructed to clean parts and replace any that show wear or damage. Torque specifications are given for reinstallation.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...f8usejkdmmd8i
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve - Instructions include loosening a plug, carefully removing a cap, and removing additional parts. Reinstallation is the reverse order.
- Engine oil pump - Removal requires removing screws and covers. Installation includes cleaning, inspecting clearances, reinstalling covers with screws.
- Water pump - Removal requires removing belts, bolts, and pulley. Installation is the reverse order with a new gasket.
- Water temperature regulator - Removal requires draining coolant, disconnecting hoses, and removing bolts and gasket. Installation is the reverse
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...f8seodkdmdmed3
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening specific bolts and components in a certain sequence. Safety precautions are provided to contain fluids and wear protective equipment. Installation is the reverse of removal, and components should be clean and free of damage.
Caterpillar cat 279 d compact track loader (prefix rcx) service repair manual...fjjskekskem
This document provides instructions for removing and installing various engine components on a 279D Compact Track Loader with a C3.3B engine, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening bolts, removing springs and other parts, checking for wear and damage, and installing components in reverse order. Safety precautions are provided regarding contained fluids and sudden spring release.
Caterpillar cat 279 d compact track loader (prefix rcx) service repair manual...fujsjefskekfksem
This document provides instructions for removing and installing various engine components on a 279D Compact Track Loader including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening bolts/screws, removing parts, installing replacement parts in the reverse order, and noting important safety information and checks to perform. Torque specifications are provided where relevant.
Caterpillar cat 279 d compact track loader (prefix rcx) service repair manual...fhshefjjskefkem
This document provides instructions for removing and installing various engine components on a 279D Compact Track Loader with a C3.3B engine, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening bolts, removing parts, inspecting components for wear or damage, and installing parts in the reverse order of removal while applying grease or installing new gaskets as specified. Safety notices are included to contain fluids and wear protective equipment.
Caterpillar cat 279 d compact track loader (prefix rcx) service repair manual...ujfjdkkmsme
This document provides instructions for removing and installing various engine components on a 279D Compact Track Loader with a C3.3B engine, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening bolts, removing springs and other parts, checking for wear and damage, and installing components in reverse order. Safety precautions are provided regarding contained fluids and sudden spring release.
Caterpillar cat 279 d compact track loader (prefix rcx) service repair manual...ufjjjskkmsmed
This document provides instructions for removing and installing various engine components on a 279D Compact Track Loader with a C3.3B engine, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening bolts, removing parts, inspecting components, and installing parts in the reverse order of removal while following safety precautions. Torque specifications and required tools are provided where needed.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...tengtui535
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening specific bolts and components in a numbered list. Safety precautions are provided, and technicians are instructed to clean parts and replace any that show wear or damage. Torque specifications are given for reinstallation.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...f8usejkdmmd8i
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve - Instructions include loosening a plug, carefully removing a cap, and removing additional parts. Reinstallation is the reverse order.
- Engine oil pump - Removal requires removing screws and covers. Installation includes cleaning, inspecting clearances, reinstalling covers with screws.
- Water pump - Removal requires removing belts, bolts, and pulley. Installation is the reverse order with a new gasket.
- Water temperature regulator - Removal requires draining coolant, disconnecting hoses, and removing bolts and gasket. Installation is the reverse
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...f8seodkdmdmed3
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening specific bolts and components in a certain sequence. Safety precautions are provided to contain fluids and wear protective equipment. Installation is the reverse of removal, and components should be clean and free of damage.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...ze6074xunong
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve - Instructions include loosening a plug, carefully removing a cap, and removing additional parts. Reinstallation is the reverse order.
- Engine oil pump - Removal involves removing screws and covers. Installation includes cleaning parts, checking clearances, applying grease, and reinstalling covers.
- Water pump - Removal requires removing belts, bolts, and the pump. Installation is the reverse order with a new gasket.
- Water temperature regulator - Removal involves disconnecting hoses, removing bolts and a gasket, and taking out the regulator. Install
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...f8usejkddmmd
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve - Instructions include loosening a plug, carefully removing a cap, and removing additional parts. Reinstallation is the reverse order.
- Engine oil pump - Removal involves removing screws and covers. Installation includes cleaning parts, checking clearances, applying grease, and reinstalling covers.
- Water pump - Removal requires removing belts, bolts, and the pump. Installation is the reverse order with a new gasket.
- Water temperature regulator - Removal involves disconnecting hoses, removing bolts and a gasket, and taking out the regulator. Install
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...fjskemmd4r
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve - Loosen plug and carefully remove cap to release spring force and remove parts. Install in reverse order.
- Engine oil pump - Remove screws and covers to access rotors. Inspect for wear and install ensuring proper clearance.
- Water pump - Remove bolts to access pump. Inspect gasket and install new one when reinstalling pump.
- Water temperature regulator - Disconnect hose and remove bolts/gasket to access regulator. Check operation on installation.
- Flywheel - Loosen bolts in specific pattern and remove using puller. Clean
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...jfkksemmdmd
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve - describes loosening a plug and removing spring and plunger components
- Engine oil pump - removing screws and covers to access inner and outer rotor components
- Water pump - removing bolts and pulley to access the pump and replace the gasket
- Water temperature regulator - disconnecting hoses and removing bolts, gasket, and regulator component
- Flywheel - removing bolts, dowels and flywheel component
The procedures provide illustrations and specify torque values for reinstallation. Safety and cleaning notes are included.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...f8usjejkdmmd
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening specific bolts and components in a certain sequence. Safety precautions are provided to contain fluids and wear protective equipment. Installation is the reverse of removal, and components should be clean and free of damage.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...fujskdiddkmdm3e
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve - Instructions include loosening a plug, carefully removing a cap, and removing additional parts. Reinstallation is the reverse order.
- Engine oil pump - Removal involves removing screws and covers. Installation includes cleaning parts, checking clearances, applying grease, and reinstalling covers.
- Water pump - Removal requires removing belts, bolts, and the pump. Installation is the reverse order with a new gasket.
- Water temperature regulator - Removal involves disconnecting hoses, removing bolts and a gasket, and taking out the regulator. Install
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...gen78guozun
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve - Instructions include loosening a plug, carefully removing a cap, and removing additional parts. Reinstallation is the reverse order.
- Engine oil pump - Removal involves removing screws and covers. Installation includes cleaning parts, checking clearances, applying grease, and reinstalling covers.
- Water pump - Removal requires removing belts, bolts, and the pump. Installation is the reverse order with a new gasket.
- Water temperature regulator - Removal involves disconnecting hoses, removing bolts and a gasket, and taking out the regulator. Install
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...xiapokang564341
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening bolts, plugs, and other fasteners to access the components. Safety precautions and required tools are noted. Installation is the reverse of the removal process.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...hvy7sbkw8e
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing components like caps, covers, rotors, pumps, regulators and flywheels. Special tools may be required and safety precautions are noted. Reinstallation is the reverse of removal, with cleaning, inspection and replacement of damaged or worn parts as needed. Torque specifications are provided where applicable.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...wenxian17880
The document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- The engine oil relief valve, which involves loosening a plug and carefully removing a cap to release spring force.
- The engine oil pump, which requires removing screws and covers to access the inner and outer rotors.
- The water pump, which is removed by taking off bolts and pulley, and installing a new gasket.
- The water temperature regulator, which is accessed by disconnecting hoses and removing bolts and gaskets.
Caterpillar cat 257 d multi terrain loader (prefix fmr) service repair manual...ujfjjsjekkmsmd
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including the engine oil relief valve, engine oil pump, water pump, water temperature regulator, and flywheel. The procedures describe removing parts, inspecting and cleaning components, and installing parts in the reverse order of removal while following safety precautions and using the appropriate tools. Torque specifications are provided where relevant.
Caterpillar cat 257 d multi terrain loader (prefix fmr) service repair manual...ujfdjdjfkjksk
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including the engine oil relief valve, engine oil pump, water pump, water temperature regulator, and flywheel. The procedures describe removing parts, inspecting and cleaning components, and installing parts in the reverse order of removal while following safety precautions and using the appropriate tools. Torque specifications are provided where relevant.
Caterpillar cat 257 d multi terrain loader (prefix fmr) service repair manual...fjsjefskekfmme
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including the engine oil relief valve, engine oil pump, water pump, water temperature regulator, and flywheel. The procedures describe removing parts, inspecting and cleaning components, and installing following the reverse order of removal while applying lubricants and torques as specified. Safety notices are included to wear protective equipment and contain fluids.
Caterpillar cat 257 d multi terrain loader (prefix fmr) service repair manual...fjjskekfsem
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Removing and installing the engine oil relief valve
- Removing and installing the engine oil pump
- Removing and installing the water pump
- Removing and installing the water temperature regulator
- Removing and installing the flywheel
The procedures provide detailed steps for each job, including necessary tools and torque specifications. Safety notices are included to warn technicians of potential hazards.
The document provides instructions for removing and installing the lifter group on a C2.2 engine. The removal process involves draining coolant, loosening bolts in a specific sequence, and removing the cylinder head. Dowel pins must be inspected and new gaskets installed. When installing, the cylinder head is positioned with guide bolts and tightened in a numerical sequence using a torque wrench and degree wheel. Hoses are then reconnected.
The document provides instructions for removing and installing the lifter group on a C2.2 engine. The removal process involves draining coolant, loosening and removing bolts, and lifting off the cylinder head. When installing, the instructions specify cleaning surfaces, installing dowels and a new gasket, tightening bolts in a specific sequence, and reinstalling other components. Tools include feeler gauges, guide bolts, and a degree wheel for proper installation of the cylinder head and lifter group.
The document provides instructions for removing and installing the lifter group on a C2.2 engine. The removal process involves draining coolant, loosening and removing bolts, and lifting off the cylinder head. When installing, the instructions specify cleaning surfaces, installing dowels and a new gasket, tightening bolts in a specific sequence, and reinstalling other components. Tools include feeler gauges, guide bolts, and a degree wheel for tightening bolts to the specified torque and angle.
The document provides instructions for removing and installing various powertrain components on a 745C articulated truck, including:
1) Removing and installing the torque converter, which requires using lifting tools and weighs approximately 95 kg.
2) Removing and installing the transmission scavenge pump, which involves disconnecting hoses and removing mounting bolts.
3) Removing and installing the transmission oil filter, which requires releasing system pressure and removing mounting bolts and harnesses.
This document provides instructions for removing and installing the front suspension frame on a 745 Articulated Truck. The removal procedure involves disconnecting hydraulic lines, removing mounting bolts, and using lifting equipment to remove the heavy frame component. The installation procedure is the reverse of removal, and includes priming bearings with grease, tightening bolts to the specified torque values, and reconnecting hydraulic lines. Safety precautions are provided regarding working under heavy components and relieving hydraulic pressure.
This document provides instructions for removing and installing various diesel exhaust fluid (DEF) system components on a Caterpillar 730C Ejector Articulated Truck. It includes procedures for the DEF tank, pump, injector, electronic control module, heater coolant solenoid valve, and fuel solenoid valve. The document contains illustrations and torque specifications for each component. Safety and installation notes are also provided.
This document provides instructions for removing and disassembling the engine and torque converter from a Caterpillar 730C Ejector Articulated Truck. It describes disconnecting wiring harnesses, hoses, brackets, and removing bolts to detach the engine. It then outlines steps to disassemble the torque converter including removing housing, bearings, plates, and seals. The instructions are detailed with illustrations and cautions for safe removal of pressurized components.
This document provides instructions for installing an automatic timing advance and removing a fuel injection pump housing and governor from a Caterpillar 3304B engine. It describes:
1) Using various tools to install the automatic timing advance and tighten bolts to the specified torques.
2) Removing components like lines, covers, and tubes to access the fuel injection pump housing and governor.
3) Using lifting equipment to safely remove the housing and governor assembly due to its weight.
More Related Content
Similar to Caterpillar Cat 279D COMPACT TRACK LOADER (Prefix RCX) Service Repair Manual (RCX00001 and up).pdf
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...ze6074xunong
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve - Instructions include loosening a plug, carefully removing a cap, and removing additional parts. Reinstallation is the reverse order.
- Engine oil pump - Removal involves removing screws and covers. Installation includes cleaning parts, checking clearances, applying grease, and reinstalling covers.
- Water pump - Removal requires removing belts, bolts, and the pump. Installation is the reverse order with a new gasket.
- Water temperature regulator - Removal involves disconnecting hoses, removing bolts and a gasket, and taking out the regulator. Install
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...f8usejkddmmd
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve - Instructions include loosening a plug, carefully removing a cap, and removing additional parts. Reinstallation is the reverse order.
- Engine oil pump - Removal involves removing screws and covers. Installation includes cleaning parts, checking clearances, applying grease, and reinstalling covers.
- Water pump - Removal requires removing belts, bolts, and the pump. Installation is the reverse order with a new gasket.
- Water temperature regulator - Removal involves disconnecting hoses, removing bolts and a gasket, and taking out the regulator. Install
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...fjskemmd4r
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve - Loosen plug and carefully remove cap to release spring force and remove parts. Install in reverse order.
- Engine oil pump - Remove screws and covers to access rotors. Inspect for wear and install ensuring proper clearance.
- Water pump - Remove bolts to access pump. Inspect gasket and install new one when reinstalling pump.
- Water temperature regulator - Disconnect hose and remove bolts/gasket to access regulator. Check operation on installation.
- Flywheel - Loosen bolts in specific pattern and remove using puller. Clean
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...jfkksemmdmd
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve - describes loosening a plug and removing spring and plunger components
- Engine oil pump - removing screws and covers to access inner and outer rotor components
- Water pump - removing bolts and pulley to access the pump and replace the gasket
- Water temperature regulator - disconnecting hoses and removing bolts, gasket, and regulator component
- Flywheel - removing bolts, dowels and flywheel component
The procedures provide illustrations and specify torque values for reinstallation. Safety and cleaning notes are included.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...f8usjejkdmmd
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening specific bolts and components in a certain sequence. Safety precautions are provided to contain fluids and wear protective equipment. Installation is the reverse of removal, and components should be clean and free of damage.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...fujskdiddkmdm3e
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve - Instructions include loosening a plug, carefully removing a cap, and removing additional parts. Reinstallation is the reverse order.
- Engine oil pump - Removal involves removing screws and covers. Installation includes cleaning parts, checking clearances, applying grease, and reinstalling covers.
- Water pump - Removal requires removing belts, bolts, and the pump. Installation is the reverse order with a new gasket.
- Water temperature regulator - Removal involves disconnecting hoses, removing bolts and a gasket, and taking out the regulator. Install
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...gen78guozun
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve - Instructions include loosening a plug, carefully removing a cap, and removing additional parts. Reinstallation is the reverse order.
- Engine oil pump - Removal involves removing screws and covers. Installation includes cleaning parts, checking clearances, applying grease, and reinstalling covers.
- Water pump - Removal requires removing belts, bolts, and the pump. Installation is the reverse order with a new gasket.
- Water temperature regulator - Removal involves disconnecting hoses, removing bolts and a gasket, and taking out the regulator. Install
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...xiapokang564341
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing and loosening bolts, plugs, and other fasteners to access the components. Safety precautions and required tools are noted. Installation is the reverse of the removal process.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...hvy7sbkw8e
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve
- Engine oil pump
- Water pump
- Water temperature regulator
- Flywheel
The procedures describe removing components like caps, covers, rotors, pumps, regulators and flywheels. Special tools may be required and safety precautions are noted. Reinstallation is the reverse of removal, with cleaning, inspection and replacement of damaged or worn parts as needed. Torque specifications are provided where applicable.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...wenxian17880
The document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- The engine oil relief valve, which involves loosening a plug and carefully removing a cap to release spring force.
- The engine oil pump, which requires removing screws and covers to access the inner and outer rotors.
- The water pump, which is removed by taking off bolts and pulley, and installing a new gasket.
- The water temperature regulator, which is accessed by disconnecting hoses and removing bolts and gaskets.
Caterpillar cat 257 d multi terrain loader (prefix fmr) service repair manual...ujfjjsjekkmsmd
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including the engine oil relief valve, engine oil pump, water pump, water temperature regulator, and flywheel. The procedures describe removing parts, inspecting and cleaning components, and installing parts in the reverse order of removal while following safety precautions and using the appropriate tools. Torque specifications are provided where relevant.
Caterpillar cat 257 d multi terrain loader (prefix fmr) service repair manual...ujfdjdjfkjksk
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including the engine oil relief valve, engine oil pump, water pump, water temperature regulator, and flywheel. The procedures describe removing parts, inspecting and cleaning components, and installing parts in the reverse order of removal while following safety precautions and using the appropriate tools. Torque specifications are provided where relevant.
Caterpillar cat 257 d multi terrain loader (prefix fmr) service repair manual...fjsjefskekfmme
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including the engine oil relief valve, engine oil pump, water pump, water temperature regulator, and flywheel. The procedures describe removing parts, inspecting and cleaning components, and installing following the reverse order of removal while applying lubricants and torques as specified. Safety notices are included to wear protective equipment and contain fluids.
Caterpillar cat 257 d multi terrain loader (prefix fmr) service repair manual...fjjskekfsem
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Removing and installing the engine oil relief valve
- Removing and installing the engine oil pump
- Removing and installing the water pump
- Removing and installing the water temperature regulator
- Removing and installing the flywheel
The procedures provide detailed steps for each job, including necessary tools and torque specifications. Safety notices are included to warn technicians of potential hazards.
The document provides instructions for removing and installing the lifter group on a C2.2 engine. The removal process involves draining coolant, loosening bolts in a specific sequence, and removing the cylinder head. Dowel pins must be inspected and new gaskets installed. When installing, the cylinder head is positioned with guide bolts and tightened in a numerical sequence using a torque wrench and degree wheel. Hoses are then reconnected.
The document provides instructions for removing and installing the lifter group on a C2.2 engine. The removal process involves draining coolant, loosening and removing bolts, and lifting off the cylinder head. When installing, the instructions specify cleaning surfaces, installing dowels and a new gasket, tightening bolts in a specific sequence, and reinstalling other components. Tools include feeler gauges, guide bolts, and a degree wheel for proper installation of the cylinder head and lifter group.
The document provides instructions for removing and installing the lifter group on a C2.2 engine. The removal process involves draining coolant, loosening and removing bolts, and lifting off the cylinder head. When installing, the instructions specify cleaning surfaces, installing dowels and a new gasket, tightening bolts in a specific sequence, and reinstalling other components. Tools include feeler gauges, guide bolts, and a degree wheel for tightening bolts to the specified torque and angle.
Similar to Caterpillar Cat 279D COMPACT TRACK LOADER (Prefix RCX) Service Repair Manual (RCX00001 and up).pdf (17)
The document provides instructions for removing and installing various powertrain components on a 745C articulated truck, including:
1) Removing and installing the torque converter, which requires using lifting tools and weighs approximately 95 kg.
2) Removing and installing the transmission scavenge pump, which involves disconnecting hoses and removing mounting bolts.
3) Removing and installing the transmission oil filter, which requires releasing system pressure and removing mounting bolts and harnesses.
This document provides instructions for removing and installing the front suspension frame on a 745 Articulated Truck. The removal procedure involves disconnecting hydraulic lines, removing mounting bolts, and using lifting equipment to remove the heavy frame component. The installation procedure is the reverse of removal, and includes priming bearings with grease, tightening bolts to the specified torque values, and reconnecting hydraulic lines. Safety precautions are provided regarding working under heavy components and relieving hydraulic pressure.
This document provides instructions for removing and installing various diesel exhaust fluid (DEF) system components on a Caterpillar 730C Ejector Articulated Truck. It includes procedures for the DEF tank, pump, injector, electronic control module, heater coolant solenoid valve, and fuel solenoid valve. The document contains illustrations and torque specifications for each component. Safety and installation notes are also provided.
This document provides instructions for removing and disassembling the engine and torque converter from a Caterpillar 730C Ejector Articulated Truck. It describes disconnecting wiring harnesses, hoses, brackets, and removing bolts to detach the engine. It then outlines steps to disassemble the torque converter including removing housing, bearings, plates, and seals. The instructions are detailed with illustrations and cautions for safe removal of pressurized components.
This document provides instructions for installing an automatic timing advance and removing a fuel injection pump housing and governor from a Caterpillar 3304B engine. It describes:
1) Using various tools to install the automatic timing advance and tighten bolts to the specified torques.
2) Removing components like lines, covers, and tubes to access the fuel injection pump housing and governor.
3) Using lifting equipment to safely remove the housing and governor assembly due to its weight.
This document provides instructions for servicing the grapple arch cylinder on a 527 Track Skidder. It describes how to remove the cylinder by disconnecting hoses, removing retaining pins, and lifting it from the arch. It then details how to disassemble the cylinder by removing seals and bearings. The assembly process is outlined as well, including installing new seals and bearings and reattaching the cylinder to the arch using retaining pins.
This document provides instructions for removing the transmission from a 432F2 backhoe loader. It describes:
1) Placing jack stands under the front and rear of the loader to lift it 1270 mm off the ground for access.
2) Draining the transmission oil per the operation manual before removal.
3) Removing mounting bolts, brackets, and other hardware to separate the transmission from the loader.
This document provides instructions for removing and installing the flywheel housing and crankshaft front seal on a 3054 engine. It outlines the required tools and safety precautions, and gives a step-by-step process including supporting the engine, removing mounting bolts, lifting the housing off with links, cleaning surfaces, and torquing bolts to specified values. It also describes removing the crankshaft front seal by drilling holes and pulling it out, and installing the new seal by lubricating the lip and pressing it into place.
This document provides instructions for removing and installing a flywheel housing on a Caterpillar 3054 engine. It outlines the required tools and safety precautions. The removal procedure involves first removing the electric starting motor and flywheel. For engines with a 14-bolt housing, the housing is then removed by taking out bolts and removing the housing and gasket from dowels in the cylinder block. For engines with a 10-bolt housing, the one-piece housing assembly is removed after loosening bolts in sequence. The installation procedure provides instructions for cleaning parts, placing the housing and seal over a tool, and tightening bolts to the specified torque.
This document provides instructions for removing and installing fuel injection nozzles and inlet and exhaust valve springs on a Caterpillar 3054 engine. The fuel injection nozzle removal procedure involves removing fuel lines, loosening a threaded nut, and removing the nozzle and seat washer. Installation requires cleaning threads, installing a new seat washer, applying anti-seize compound, and tightening the nut. The valve spring procedure requires using a compressor tool to compress springs, removing keepers and retainers, and replacing springs in the reverse order. Tools and torque specifications are provided.
This document provides instructions for removing and installing fuel injection nozzles and fuel injection pumps on a Caterpillar 3054 engine. It describes the required tools and safety precautions. The procedures include removing fuel lines, loosening nuts, removing nozzles and pumps, and installing new seals and washers. Precise positioning and torque specifications are noted to maintain proper timing.
The document provides instructions for removing and installing a hydraulic tank on a 420F backhoe loader. The removal procedure involves:
1. Disconnecting hoses from the hydraulic tank assembly
2. Disconnecting clamps on hoses connected to the tank
3. Removing bolts to detach the tank from the vehicle
4. Removing additional components like a strainer and gauge from the tank. The installation procedure is the reverse of removal.
The document provides instructions for removing and installing a tie rod on the front steering of a 420D backhoe loader. It lists the required tool as a transmission repair stand and instructs the user to first remove the front axle from the machine. Safety precautions are provided to release hydraulic pressure before servicing. Detailed steps are then outlined to remove the tie rod from the axle and install a new one.
This document provides instructions for disassembling and assembling components of a 320C excavator travel motor. The summary is:
1. The travel motor disassembly procedure involves removing bolts, seals, springs, plates, and pistons from the motor housing.
2. Cleaning and applying identification marks to components is important to prevent contamination and ensure correct reassembly.
3. Tools are required to remove some components, including link brackets, slide hammers, bearing pullers, and crossblocks.
This document provides instructions for removing and disassembling the water pump on a Caterpillar 320C excavator engine. The key steps include:
1. Draining the coolant and removing the V-belts.
2. Removing four bolts to separate the water pump, pulley, and O-ring from the engine.
3. Heating the water pump to 80°C to make disassembly easier, then removing four bolts and the pulley from the pump housing.
This document provides instructions for removing and installing various components of a Caterpillar 3066 engine, including the flywheel, crankshaft rear seal, crankshaft pulley, and flywheel housing. The procedures describe using various tools to remove and install each part, providing details on cleaning, inspection, and torque specifications. Safety notices are also included to keep parts clean and contain fluids.
Caterpillar Cat 320C L Excavator (Prefix JTG) Service Repair Manual (JTG00001...f8usjejkdmmd
The documents provide instructions for servicing the travel motor of a 320C excavator, including removing and installing the counterbalance valve, removing and disassembling the travel motor, and assembling the travel motor. The documents describe each step in detail and include illustrations to identify the relevant components. Proper cleaning, containment of fluids, and replacement of O-rings are emphasized throughout.
Caterpillar Cat 320C L Excavator (Prefix MAB) Service Repair Manual (MAB00001...f8usjejkdmmd
This document provides instructions for disassembling a recoil spring assembly. It begins by removing the front idler and recoil spring assembly from the machine. A specialized recoil spring bench tool is then used to disassemble the recoil spring. The spring is under high tension and special precautions are required when handling it. The tool supports the spring and allows the retaining nut to be safely removed with a hydraulic cylinder, releasing the compressed spring.
The documents provide instructions for servicing components of a 320C excavator, including installing a counterbalance valve, removing and disassembling the travel motor, and assembling the travel motor. The documents describe cleaning parts and containing fluids, detail the required tools, and outline the step-by-step processes for installing, removing, and disassembling/assembling various components while taking appropriate safety precautions.
Caterpillar Cat 320C L Excavator (Prefix DBG) Service Repair Manual (DBG00001...f8usjejkdmmd
This document provides instructions for removing and installing various components of a Caterpillar 3066 engine, including the flywheel, crankshaft rear seal, crankshaft pulley, and flywheel housing. The procedures describe using various tools to remove and install each part, providing details on cleaning, inspection, and torque specifications. Safety notices are also included to keep parts clean and contain fluids.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
2. Shutdown SIS
Previous Screen
Product: COMPACT TRACK LOADER
Model: 279D COMPACT TRACK LOADER RCX
Configuration: 279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B Engine
Disassembly and Assembly
C2.6 and C3.3B Engines for Caterpillar Built Machines
Media Number -UENR0137-11 Publication Date -01/08/2015 Date Updated -12/07/2018
i05242518
Engine Oil Relief Valve - Remove and Install
SMCS - 1315-010
Removal Procedure
Note: Refer to Specification UENR0995 "Engine Design" for non-specified engine Torque
Values.
Illustration 1 g02788578
Illustration 2 g02788541
1/2
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
1. Loosen plug (1). Carefully remove cap (1) from the front housing cover.
Note: The spring force will be released when the cap is removed.
2. Remove plug (1), washer (2), spring (3), and plunger (4) from the bore for the relief valve in
the front housing cover.
Installation Procedure
1. Install engine oil relief valve (1) in the reverse order of removal.
a. Install plug (1) and tighten plug (1) to a torque of 69 to 78 N·m (51 to 57 lb ft).
Note: Ensure that the spring is properly located inside the plunger and the cap.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Oct 29 22:47:54 UTC+0800 2019
2/2
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Shutdown SIS
Previous Screen
Product: COMPACT TRACK LOADER
Model: 279D COMPACT TRACK LOADER RCX
Configuration: 279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B Engine
Disassembly and Assembly
C2.6 and C3.3B Engines for Caterpillar Built Machines
Media Number -UENR0137-11 Publication Date -01/08/2015 Date Updated -12/07/2018
i05242520
Engine Oil Pump - Remove and Install
SMCS - 1304-010
Removal Procedure
Start By:
a. Remove the front housing.
Note: Refer to Specification UENR0995 "Engine Design" for non-specified engine Torque
Values.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Dispose of all fluids according to local regulations and mandates.
1/4
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 1 g02788686
1. Remove screws (2) and cover (1).
Illustration 2 g02788689
2. Remove inner rotor (4) from outer rotor (3).
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 129-1967 White Grease 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
2/4
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. NOTICE
If any part of the engine oil pump is worn or damaged, the complete
assembly of the engine oil pump must be replaced.
1. Ensure that all components of the engine oil pump are clean and free from wear and
damage.
Illustration 3 g02788689
2. Position outer rotor (3) into the pump body. Check the clearance between outer rotor (3) and
the pump body.
3. Install inner rotor (4) into outer rotor (3). Check the clearance between the lobes of outer
rotor (3) and inner rotor (4).
Illustration 4 g02788686
4. Position a strip of Plastigage onto the outer rotor face with Tooling (A). Position cover (1)
and install screws (2) and torque. Remove cover (1) and check clearance between the rotor
and cover (1).
5. Position cover (1) and install screws (2). Tighten screws (2) to a torque of 8 to 9 N·m
(70 to 83 lb in).
3/4
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. End By:
a. Install the front housing.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Oct 29 22:48:53 UTC+0800 2019
4/4
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Shutdown SIS
Previous Screen
Product: COMPACT TRACK LOADER
Model: 279D COMPACT TRACK LOADER RCX
Configuration: 279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B Engine
Disassembly and Assembly
C2.6 and C3.3B Engines for Caterpillar Built Machines
Media Number -UENR0137-11 Publication Date -01/08/2015 Date Updated -12/07/2018
i05242522
Water Pump - Remove and Install
SMCS - 1361-011; 1361-012
Removal Procedure
Start By:
a. Remove the v-belts.
Note: Refer to Specification UENR0995 "Engine Design" for non-specified engine Torque
Values.
1. Refer to Operation and Maintenance Manual, "Coolant - Change" for the proper draining
and filling procedures.
Illustration 1 g02794283
2. Remove bolts (2) and remove pulley (1).
1/2
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 2 g02794286
3. Remove bolts (4).
4. Remove water pump (3) and discard the gasket. Install a new gasket upon installation.
Installation Procedure
1. Install water pump (3) in the reverse order of removal.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Oct 29 22:49:52 UTC+0800 2019
2/2
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Shutdown SIS
Previous Screen
Product: COMPACT TRACK LOADER
Model: 279D COMPACT TRACK LOADER RCX
Configuration: 279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B Engine
Disassembly and Assembly
C2.6 and C3.3B Engines for Caterpillar Built Machines
Media Number -UENR0137-11 Publication Date -01/08/2015 Date Updated -12/07/2018
i05242525
Water Temperature Regulator - Remove and Install - C3.3B
SMCS - 1355-010
S/N - A9W1-UP
S/N - A9Z1-UP
S/N - AJ71-UP
S/N - CE21-UP
S/N - DML1-UP
S/N - EML1-UP
S/N - F8C1-UP
S/N - FMR1-UP
S/N - FTK1-UP
S/N - GBJ1-UP
S/N - GTK1-UP
S/N - HAM1-UP
S/N - HEL1-UP
S/N - HMR1-UP
S/N - JBE1-UP
S/N - JRD1-UP
1/4
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. S/N - JRF1-UP
S/N - JRS1-UP
S/N - JSL1-UP
S/N - JSN1-UP
S/N - KTS1-UP
S/N - L661-UP
S/N - L771-UP
S/N - L881-UP
S/N - LST1-UP
S/N - MLT1-UP
S/N - MPW1-UP
S/N - NTL1-UP
S/N - PPT1-UP
S/N - RCX1-UP
S/N - SEN1-UP
S/N - STK1-UP
S/N - TAZ1-UP
S/N - TLK1-UP
S/N - WCT1-UP
Removal Procedure
Note: Refer to Specification UENR0995 "Engine Design" for non-specified engine Torque
Values.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
2/4
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Dispose of all fluids according to local regulations and mandates.
1. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the
correct draining procedure.
Note: Coolant only needs drained to below the water temperature regulator.
Illustration 1 g02794379
2. Disconnect hose assembly (1).
3. Remove bolts (2) from the water temperature regulator housing . Remove water temperature
regulator elbow (3).
Illustration 2 g02794381
3/4
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 3 g02794385
4. Remove gasket (5) and remove water temperature regulator (4) from the water temperature
regulator housing.
Note: Note the orientation of the water temperature regulator elbow.
Installation Procedure
1. Install water temperature regulator (4) in the reverse order of removal.
a. Check the water temperature regulator for correct operation. Refer to System
Operation, Testing and Adjusting, "Water Temperature Regulator - Test" for the
correct procedure to test the water temperature regulator. If any components of the
water temperature regulator housing are worn or damaged, the complete assembly
must be replaced.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Oct 29 22:50:52 UTC+0800 2019
4/4
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02794543
1. Remove two bolts (2) from flywheel (1).
Illustration 2 g02798921
2. Install Tooling (A) into the crankshaft.
3. Install Tooling (B) and a suitable lifting device on flywheel (1). The weight of flywheel (1)
is approximately 30 kg (66 lb).
4. Remove remaining bolts (2).
5. Remove flywheel (1) from the cylinder block.
3/6
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 3 g02798923
6. Inspect flywheel (1) and the ring gear (3) for wear and damage. Replace any worn
components or damaged components.
7. If necessary, remove the flywheel ring gear (3), follow Step 7.a through Step 7.b.
a. Place the flywheel assembly on a suitable support.
b. Use a hammer and a punch in order to remove ring gear (3) from flywheel (1). If
necessary, a torch may be needed to heat ring gear (3).
Note: Identify the orientation of the teeth on the flywheel ring gear (3).
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A -
Guide Stud
M12 - 1.25 by 100 mm
2
B 138-7573 Link Bracket 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
4/6
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
19. Illustration 4 g02798923
Always wear protective gloves when handling parts that have been
heated.
1. If flywheel ring gear (3) was removed, follow Step 1.a through Step 1.c in order to install
ring gear (3) to flywheel (1).
a. Identify the orientation of teeth on new ring gear (3).
Note: The chamfered side of ring gear teeth must face toward the starting motor when
the flywheel is installed. This position will ensure the correct engagement of the
starting motor.
b. Raise heat of flywheel ring gear (3) in an oven to a maximum temperature of 250 °C
(482 °F) prior to installation.
Note: Do not use a torch to heat the ring gear.
c. Ensure that the orientation of ring gear (3) is correct and quickly install the ring gear
onto flywheel (1).
5/6
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 5 g02798921
2. Install Tooling (B) and a suitable lifting device on flywheel (1). The weight of flywheel (1)
is approximately 30 kg (66 lb).
3. Install Tooling (A) into the crankshaft.
4. Use the lifting device to position flywheel (1) onto Tooling (A).
5. Install bolts (2) to flywheel (1).
6. Remove Tooling (A).
Illustration 6 g02794543
7. Install remaining bolts (2) to flywheel (1). Apply engine oil to bolts. Tighten bolts (2) to a
torque of 98 to 107 N·m (72 to 80 lb ft).
8. Check the run out of the flywheel. Refer to Specifications, "Flywheel" for further
information.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Oct 29 22:51:51 UTC+0800 2019
6/6
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Shutdown SIS
Previous Screen
Product: COMPACT TRACK LOADER
Model: 279D COMPACT TRACK LOADER RCX
Configuration: 279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B Engine
Disassembly and Assembly
C2.6 and C3.3B Engines for Caterpillar Built Machines
Media Number -UENR0137-11 Publication Date -01/08/2015 Date Updated -12/07/2018
i05242540
Crankshaft Rear Seal and Wear Sleeve - Remove - Includes
Crankshaft Gear
SMCS - 1161-011; 7558-011
Removal Procedure
Start By:
a. Remove the flywheel.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. Place the engine at top dead center.
1/2
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 1 g02799897
2. Use a screw driver to remove rear seal (1).
Illustration 2 g02799899
3. Check the alignment of crankshaft gear (2) and camshaft gear (3). Remove crankshaft gear
(2) and ring seal.
Illustration 3 g02799901
4. Place crankshaft gear (2) with wear sleeve (4) in a suitable vice. Remove wear sleeve (4)
with a suitable chisel.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Oct 29 22:52:50 UTC+0800 2019
2/2
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Shutdown SIS
Previous Screen
Product: COMPACT TRACK LOADER
Model: 279D COMPACT TRACK LOADER RCX
Configuration: 279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B Engine
Disassembly and Assembly
C2.6 and C3.3B Engines for Caterpillar Built Machines
Media Number -UENR0137-11 Publication Date -01/08/2015 Date Updated -12/07/2018
i05242547
Crankshaft Rear Seal and Wear Sleeve - Install - Includes
Crankshaft Gear
SMCS - 1161-012; 7558-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
390-1146 Crankshaft Rear Seal and Wear Sleeve Driver(1)
1
423-9665 Crank shaft Rear Seal and Wear Sleeve Driver(2)
1
(1)
Used for the C3.3B
(2)
Used for the C2.6
Note: Refer to Specification UENR0995 "Engine Design" for non-specified engine Torque
Values.
1/2
279D Compact Track Loader RCX00001-UP (MACHINE) POWERED BY C3.3B En...
2019/10/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...