Caterpillar cat 262 c2 skid steer loader (prefix tmw) service repair manual (tmw00001 and up)

Service Repair Manual
Models
262C2 Skid Steer Loader

Shutdown SIS
Previous Screen
Product: SKID STEER LOADER
Model: 262C2 SKID STEER LOADER TMW
Configuration: 262C2 Skid Steer Loader TMW00001-UP (MACHINE) POWERED BY C3.4 Engine
Disassembly and Assembly
246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Systems
Media Number -KENR5116-02 Publication Date -01/08/2012 Date Updated -07/08/2012
i02652282
Control Valve (Work Tool) - Disassemble - High Flow
SMCS - 5051-015
Disassembly Procedure
Start By:
A. Remove the control valve. Refer to Disassembly and Assembly, "Control Valve (Work
Tool) - Remove".
Note: Cleanliness is an important factor. Before you begin the disassembly procedure, the exterior
of the components should be thoroughly cleaned. This will help to prevent dirt from entering the
internal mechanism. Precision components can be damaged by contaminants or by dirt. Perform
disassembly procedures on a clean work surface. Keep components covered and protected at all
times.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Dealer Service
Tool Catalog" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
1/11262C2 Skid Steer Loader TMW00001-UP (MACHINE) POWERED BY C3.4 Engine(...
2019/11/20https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...

Illustration 1 g01332398
1. Remove hose (1) .
2. Remove nuts (2) and cartridge assembly (3) .
3. Remove O-ring seals (4) from cartridge assemblies (3) .

4. Remove bolt (7), retainer (6), and solenoid (5) .
5. Remove O-ring seals (8) from solenoid (5) .

6. Remove nuts (9) and coil assemblies (10) .
7. Remove cartridge assemblies (11) .

9. Remove bolt (13), retainer (14), and solenoid (15) .
10. Remove O-ring seals (16) from solenoid (15) .
11. Remove nut (18) and coil assembly (17) .

12. Remove O-ring seals (19) from coil assembly (17) .
13. Remove cartridge assembly (20) .

14. Remove O-ring seals (21), backup ring (22), and screen (23) from cartridge assembly (20) .
15. Reposition the control valve, as shown.
16. Remove relief valves (24) and (25) .
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.

17. Reposition the control valve, as shown.
18. Remove plug (26) and the O-ring seal. Remove spool assembly (27). Remove plug (28) and
the O-ring seal.

19. Remove plug (29) and the O-ring seal. Remove spring (30), retainer (31), and spool (32).
Remove plug (35) and the O-ring seal. Remove spring (34) and retainer (33) .
20. Remove plug (36) and the O-ring seal. Remove spring (37) and retainer (38). Remove plug
(40) and the O-ring seal. Remove spool assembly (39) .

21. Remove plug (41) and the O-ring seal. Remove spring (42), retainer (43), and spool (44).
Remove plug (47) and the O-ring seal. Remove spring (46) and retainer (45) .
10/11262C2 Skid Steer Loader TMW00001-UP (MACHINE) POWERED BY C3.4 Engi...

22. Remove plug (48) and the O-ring seal. Remove spring (49), valve (50), spring (51), and
valve (52). Repeat for the remaining valve assemblies.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Nov 20 15:28:42 UTC+0800 2019
11/11262C2 Skid Steer Loader TMW00001-UP (MACHINE) POWERED BY C3.4 Engi...

Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.

Shutdown SIS
Previous Screen
Product: SKID STEER LOADER
Model: 262C2 SKID STEER LOADER TMW
Configuration: 262C2 Skid Steer Loader TMW00001-UP (MACHINE) POWERED BY C3.4 Engine
Disassembly and Assembly
246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Systems
Media Number -KENR5116-02 Publication Date -01/08/2012 Date Updated -07/08/2012
i02697361
Control Valve (Work Tool) - Disassemble
SMCS - 5051-015
S/N - TMW1-UP
Disassembly Procedure
Start By:
A. Remove the control valve. Refer to Disassembly and Assembly, "Control Valve (Work
Tool) - Remove".
Note: Cleanliness is an important factor. Before you begin the disassembly procedure, the exterior
of the components should be thoroughly cleaned. This will help to prevent dirt from entering the
internal mechanism. Precision components can be damaged by contaminants or by dirt. Perform
disassembly procedures on a clean work surface. Keep components covered and protected at all
times.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Dealer Service
Tool Catalog" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.

1. Remove hose (1) .
2. Remove nuts (2) and coil assemblies (3) .

3. Remove cartridge assemblies (4) .

5. Remove plug (6), plug (12), and the O-ring seals.
6. Remove spring (7), washer (8), spool (9), spring (11), and washer (10) .

Caterpillar cat 262 c2 skid steer loader (prefix tmw) service repair manual (tmw00001 and up)

Recommended

Recommended

More Related Content

What's hot

What's hot (15)

Similar to Caterpillar cat 262 c2 skid steer loader (prefix tmw) service repair manual (tmw00001 and up)

Similar to Caterpillar cat 262 c2 skid steer loader (prefix tmw) service repair manual (tmw00001 and up) (14)

More from ufjjsekkemmd

More from ufjjsekkemmd (20)

Recently uploaded

Recently uploaded (20)

Caterpillar cat 262 c2 skid steer loader (prefix tmw) service repair manual (tmw00001 and up)