This document provides instructions for removing the lift cylinder from a 216 Skid Steer Loader. It describes releasing hydraulic pressure, tilting the cab, disconnecting hydraulic lines from the lift cylinder, and removing a retaining pin. Support is placed under the lift arm before removing the lift cylinder. Proper containment of fluids and safety precautions are noted.
Your VW's camshaft position sensor is crucial for engine performance. Signs of failure include engine misfires, difficulty starting, stalling at low speeds, reduced fuel efficiency, and the check engine light. Prompt inspection and replacement can prevent further damage and keep your VW running smoothly.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Learn why monitoring your Mercedes' Exhaust Back Pressure (EBP) sensor is crucial. Understand its role in engine performance and emission reduction. Discover five warning signs of EBP sensor failure, from loss of power to increased emissions. Take action promptly to avoid costly repairs and maintain your Mercedes' reliability and efficiency.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...Import Motorworks
Learn how to respond when the red temperature light flashes in your VW with this presentation. From checking coolant levels to seeking professional help, follow these steps promptly to prevent engine damage and ensure safety on the road.
How To Fix The Key Not Detected Issue In Mercedes CarsIntegrity Motorcar
Experiencing a "Key Not Detected" problem in your Mercedes? Don’t take it for granted. Go through this presentation to find out the exact nature of the issue you are dealing with. Have your vehicle checked by a certified professional if necessary.
What Could Cause The Headlights On Your Porsche 911 To Stop WorkingLancer Service
Discover why your Porsche 911 headlights might flicker out unexpectedly. From aging bulbs to electrical gremlins and moisture mishaps, we're delving into the reasons behind the blackout. Stay tuned to illuminate the road ahead and ensure your lights shine bright for safer journeys.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
1. Shutdown SIS
Previous Screen
Product: SKID STEER LOADER
Model: 216 SKID STEER LOADER 4NZ
Configuration: 216 226 228 Skid Steer Loader 4NZ00001-03399 (MACHINE) POWERED BY 3034 Engine
Disassembly and Assembly
216, 226, 232 and 242
Skid Steer Loaders Machine Systems
Media Number -RENR4838-02 Publication Date -01/11/2009 Date Updated -04/11/2009
i01786720
Hydraulic System Pressure - Release
SMCS - 5050-553-PX
Release Procedure
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
Lower the armrest.
1.
Turn the engine start switch to the ON position. Disengage the parking brake.
2.
Press each side of the auxiliary hydraulic control switch (A1 and A2) for one to two seconds
in order to release the auxiliary system pressure. Keep the joystick control in the
NEUTRAL position while you press the auxiliary hydraulic control switch (A1 and A2).
3.
Engage the parking brake.
4.
Start the engine and run the engine for at least 15 seconds in order to recharge the
accumulator.
5.
Turn the engine start switch to the OFF position.
6.
页码,1/2(W)
w
2016/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
2. Do not raise the armrest.
7.
Immediately, turn the engine start switch to the ON position. Disengage the parking brake.
8.
Move both of the joystick controls through all of the operating positions in order to release
the hydraulic pressure in the work tool system and the hydrostatic system.
9.
Turn the engine start switch to the OFF position.
10.
Copyright 1993 - 2016 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Aug 22 05:18:08 UTC+0800 2016
页码,2/2(W)
w
2016/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
3. Shutdown SIS
Previous Screen
Product: SKID STEER LOADER
Model: 216 SKID STEER LOADER 4NZ
Configuration: 216 226 228 Skid Steer Loader 4NZ00001-03399 (MACHINE) POWERED BY 3034 Engine
Disassembly and Assembly
216, 226, 232 and 242
Skid Steer Loaders Machine Systems
Media Number -RENR4838-02 Publication Date -01/11/2009 Date Updated -04/11/2009
i01778011
Quick Coupler - Remove and Install
SMCS - 6129-010
Removal Procedure
Start By:
Remove the work tool. Refer to Operation and Maintenance Manual, SEBU7468, "Work
Tool Coupler Operation".
A.
Release the hydraulic pressure. Refer to Disassembly and Assembly, "Hydraulic System
Pressure - Release".
B.
Illustration 1 g00561580
Use blocks to support quick coupler (1) .
1.
页码,1/4(W)
w
2016/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
4. Illustration 2 g00880709
Remove bolt (4). Remove pin assembly (3). Position cylinder (2) out of the way.
2.
Repeat Step 2 for the other side.
3.
Illustration 3 g00561609
Illustration 4 g00880711
Use a suitable lifting device to apply slight tension to quick coupler (1). Remove bolt (6).
Remove pin assembly (5) .
4.
页码,2/4(W)
w
2016/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
5. Repeat Step 4 for the other side.
5.
Use a suitable lifting device to remove quick coupler (1). The weight of the quick coupler is
approximately 66 kg (145 lb).
6.
Installation Procedure
Illustration 5 g00561609
Illustration 6 g00880711
Use a suitable lifting device to position quick coupler (1). The weight of the quick coupler is
approximately 66 kg (145 lb).
1.
Use a suitable lifting device to apply slight tension to quick coupler (1). Install pin assembly
(5). Install bolt (6) .
2.
Repeat Step 2 for the other side.
3.
页码,3/4(W)
w
2016/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
6. Illustration 7 g00880709
Position cylinder (2) in the quick coupler. Install pin assembly (3). Install bolt (4) .
4.
Repeat Step 4 for the other side.
5.
,
End By: Install the work tool. Refer to Operation and Maintenance ManualSEBU7468, "Work
Tool Coupler Operation".
Copyright 1993 - 2016 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Aug 22 05:18:41 UTC+0800 2016
页码,4/4(W)
w
2016/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
7. Shutdown SIS
Previous Screen
Product: SKID STEER LOADER
Model: 216 SKID STEER LOADER 4NZ
Configuration: 216 226 228 Skid Steer Loader 4NZ00001-03399 (MACHINE) POWERED BY 3034 Engine
Disassembly and Assembly
216, 226, 232 and 242
Skid Steer Loaders Machine Systems
Media Number -RENR4838-02 Publication Date -01/11/2009 Date Updated -04/11/2009
i01671430
Tilt Cylinder - Remove
SMCS - 5104-011
S/N - 4NZ3400-UP
S/N - 5FZ6700-UP
Removal Procedure
REQUIRED TOOLS
Tool Part Number Part Description Qty
A 1U-9759 Jack Stand 2
B 1U-9760 Jack Stand 2
Table 1
Start By:
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic
System Pressure - Release".
A.
Remove the quick coupler. Refer to Disassembly and Assembly, "Quick Coupler - Remove
and Install".
B.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
页码,1/4(W)
w
2016/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
8. Make sure all of the attachments have been lowered, oil is cool before
removing any components or lines. Remove the oil filler cap only when
the engine is stopped, and the filler cap is cool enough to touch with
your bare hand.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all lines and on all cylinders for installation purposes. Plug all
lines. This will help to prevent fluid loss and this helps to keep contaminants from entering the
system.
Illustration 1 g00593382
Use Tooling (A) to support the rear of the machine.
1.
页码,2/4(W)
w
2016/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
9. Illustration 2 g00593394
Illustration 3 g00593397
Remove snap ring (1) from the front of each lift cylinder.
2.
Remove pin (2) from the front of each lift cylinder.
3.
Illustration 4 g00684652
Attach a suitable lifting device in order to raise the lift arm assembly.
4.
页码,3/4(W)
w
2016/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
10. Use Tooling (B) in order to support lift arm assembly (3) .
5.
Illustration 5 g00684660
Disconnect lines (4) and (5) from each tilt cylinder.
6.
Illustration 6 g00684669
Remove nut (7) and bolt (6) .
7.
Remove pin (8) from the tilt cylinder.
8.
Remove the tilt cylinder from the lift arm assembly (9) .
9.
Repeat Steps 7 through 9 for the opposite side.
10.
Copyright 1993 - 2016 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Aug 22 05:19:15 UTC+0800 2016
页码,4/4(W)
w
2016/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
11. Shutdown SIS
Previous Screen
Product: SKID STEER LOADER
Model: 216 SKID STEER LOADER 4NZ
Configuration: 216 226 228 Skid Steer Loader 4NZ00001-03399 (MACHINE) POWERED BY 3034 Engine
Disassembly and Assembly
216, 226, 232 and 242
Skid Steer Loaders Machine Systems
Media Number -RENR4838-02 Publication Date -01/11/2009 Date Updated -04/11/2009
i01674277
Tilt Cylinder - Install
SMCS - 5104-012
S/N - 4NZ3400-UP
S/N - 5FZ6700-UP
Installation Procedure
REQUIRED TOOLS
Tool Part Number Part Description Qty
A 1U-9759 Jack Stand 2
B 1U-9760 Jack Stand 2
Table 1
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the attachments have been lowered, oil is cool before
removing any components or lines. Remove the oil filler cap only when
the engine is stopped, and the filler cap is cool enough to touch with
your bare hand.
页码,1/4(W)
w
2016/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
12. NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00684669
Position the tilt cylinder into lift arm assembly (9) .
1.
Install pin (8) into the tilt cylinder.
2.
Install bolt (6) and nut (7). Tighten the bolt to a torque of 28 ± 7 N·m (21 ± 5 lb ft).
3.
Repeat Steps 1 through 3 for the opposite side.
4.
页码,2/4(W)
w
2016/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
13. Illustration 2 g00684660
Connect lines (4) and (5) to each tilt cylinder.
5.
Illustration 3 g00684652
Use a suitable lifting device to lift the lift arm assembly upward.
6.
Remove Tooling (B) from the lift arm assembly (3) .
7.
Use a suitable lifting device to lower the lift arm assembly.
8.
页码,3/4(W)
w
2016/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
14. Illustration 4 g00593394
Install pin (2) into each of the lift cylinder.
9.
Install snap ring (1) onto the pin of each lift cylinder.
10.
Illustration 5 g00593382
Remove Tooling (A) from the rear of the machine.
11.
Check the hydraulic oil level. Refer to Operation and Maintenance Manual, SEBU7468,
"Hydraulic System Oil Level - Check".
12.
End By: Install the quick coupler. Refer to Disassembly and Assembly, "Quick Coupler - Remove
and Install".
Copyright 1993 - 2016 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Aug 22 05:19:48 UTC+0800 2016
页码,4/4(W)
w
2016/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
15. Shutdown SIS
Previous Screen
Product: SKID STEER LOADER
Model: 216 SKID STEER LOADER 4NZ
Configuration: 216 226 228 Skid Steer Loader 4NZ00001-03399 (MACHINE) POWERED BY 3034 Engine
Disassembly and Assembly
216, 226, 232 and 242
Skid Steer Loaders Machine Systems
Media Number -RENR4838-02 Publication Date -01/11/2009 Date Updated -04/11/2009
i01526349
Lift Cylinder - Remove
SMCS - 5102-011
S/N - 4NZ3400-UP
S/N - 5FZ6700-UP
Removal Procedure
Start By:
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic
System Pressure - Release".
A.
Tilt the cab. Refer to Disassembly and Assembly, "Cab -Tilt".
B.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the attachments have been lowered, oil is cool before
removing any components or lines. Remove the oil filler cap only when
the engine is stopped, and the filler cap is cool enough to touch with
your bare hand.
NOTICE
页码,1/4(W)
w
2016/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
16. Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all lines and on all cylinders for installation purposes. Plug all
lines. This will help to prevent fluid loss and this helps to keep contaminants from entering the
system.
Illustration 1 g00792871
Disconnect lines (1) and (2) .
1.
Remove retaining pin (3) and lower the loader lift arm brace onto the lift cylinder.
2.
页码,2/4(W)
w
2016/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
17. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
18. Illustration 2 g00792879
Attach a suitable lifting device to cylinder assembly (4) .
3.
Illustration 3 g00591488
Remove snap ring (5) .
4.
Remove pin (6) .
5.
Illustration 4 g00795160
Remove bolt (7) and the washer.
6.
Remove pin assembly (8) from the lift cylinder.
7.
Remove lift cylinder assembly (4) and the loader lift arm brace. Weight of the lift cylinder
and the loader lift arm brace is 32 kg (70 lb).
8.
页码,3/4(W)
w
2016/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
19. Illustration 5 g00690798
Loosen clamp (10) and remove lines (9) and (11) .
9.
Repeat Steps 1 through 9 for the opposite side.
10.
Copyright 1993 - 2016 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Aug 22 05:20:21 UTC+0800 2016
页码,4/4(W)
w
2016/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
20. Shutdown SIS
Previous Screen
Product: SKID STEER LOADER
Model: 216 SKID STEER LOADER 4NZ
Configuration: 216 226 228 Skid Steer Loader 4NZ00001-03399 (MACHINE) POWERED BY 3034 Engine
Disassembly and Assembly
216, 226, 232 and 242
Skid Steer Loaders Machine Systems
Media Number -RENR4838-02 Publication Date -01/11/2009 Date Updated -04/11/2009
i01586658
Lift Cylinder - Install
SMCS - 5102-012
S/N - 4NZ3400-UP
S/N - 5FZ6700-UP
Installation Procedure
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the attachments have been lowered, oil is cool before
removing any components or lines. Remove the oil filler cap only when
the engine is stopped, and the filler cap is cool enough to touch with
your bare hand.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
页码,1/3(W)
w
2016/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
21. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00690798
Install line (9) and line (11) .
1.
Tighten clamp (10) .
2.
Illustration 2 g00795160
Attach a suitable lifting device to lift cylinder assembly (4). The weight of the lift cylinder
assembly is 32 kg (70 lb).
3.
Position the lift cylinder assembly and the loader lift arm brace on the machine.
4.
Install pin assembly (8), the washer, and bolt (7) .
5.
页码,2/3(W)
w
2016/8/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...