This document discusses increasing the power output of a radio transmitter (TRX) from 80 watts to 120 watts by: 1) Removing the existing TRX configuration and adding a new configuration with an antenna pass number of B which supports higher power output. 2) Configuring the TRX device with a higher transmit power of 30 watts instead of the default. 3) Activating the TRX to apply the new configuration.

1. NAIKIN POWER
MRRU; 120 PER BOARD(TRX),
LST TRXBIND2PHYBRID
LIAT DI antennapassno,
Jikaad 2 macam (a atau b) makan sampai 120watt
Jikaad 1 macam (a) makan sampai 80watt
SCRIPTUNTUK INCREASEPOWER
DEA GTRX:TRXID = 1836;
RMV TRXBIND2PHYBRD:TRXID= 1836;
RMV GTRX:TRXID = 1836;
ADD GTRX:IDTYPE = BYID, CELLID = 292, TRXID= 1836, FREQ = 752, ISMAINBCCH= NO,TRXNO= 11;
ADD TRXBIND2PHYBRD:TRXID= 1836, IDTYPE = BYID, BTSID = 48, TRXTP = MRRU, TRXPN = 4,
RXUIDTYPE = SRNSN,CN = 0, SRN = 64, SN = 0, ANTPASSNO=B;
SET GTRXDEV:TRXID = 1836, POWL = 0, POWT = DEFAULT, OPTL = L0, SDFLAG= ENABLE,TCHAJFLAG
= NO,PL8PSK= 0, PWRSPNR= Default,RCVMD= MAINDIVERSITY,SNDMD= NOCOMB,CPS = YES,
TSPWRRESERVE= 0, FREQREUSEMODE = LOOSE,PAOPTILEVEL= L0,
OUTHOPWROVERLOADTHRESHOLD= 15, INHOPWROVERLOADTHRESHOLD= 8, PL16QAM = 0,
PL32QAM = 0, DSSTRXOFFLINE= NO;
SET GTRXCHAN:TRXID= 1836, CHNO = 0, CHTYPE = TCHFR, GPRSCHPRI= EGPRSNORCH,TSPRIORITY
= 0;
SET GTRXCHAN:TRXID= 1836, CHNO = 1, CHTYPE = TCHFR, GPRSCHPRI= EGPRSNORCH,TSPRIORITY
= 0;
SET GTRXCHAN:TRXID= 1836, CHNO = 2, CHTYPE = TCHFR, GPRSCHPRI= EGPRSNORCH,TSPRIORITY
= 0;
SET GTRXCHAN:TRXID= 1836, CHNO = 3, CHTYPE = TCHFR, GPRSCHPRI= EGPRSNORCH,TSPRIORITY
= 0;
SET GTRXCHAN:TRXID= 1836, CHNO = 4, CHTYPE = TCHFR, GPRSCHPRI= EGPRSNORCH,TSPRIORITY
= 0;
SET GTRXCHAN:TRXID= 1836, CHNO = 5, CHTYPE = TCHFR, GPRSCHPRI= EGPRSNORCH,TSPRIORITY
= 0;
SET GTRXCHAN:TRXID= 1836, CHNO = 6, CHTYPE = TCHFR, GPRSCHPRI= EGPRSNORCH,TSPRIORITY
= 0;
SET GTRXCHAN:TRXID= 1836, CHNO = 7, CHTYPE = TCHFR, GPRSCHPRI= EGPRSNORCH,TSPRIORITY
= 0;
SET GTRXDEV:TRXID = 1836, POWL = 0, POWT = 30W, OPTL = L0, SDFLAG = ENABLE,TCHAJFLAG=
YES, PL8PSK= 0, PWRSPNR= Default,RCVMD= MAINDIVERSITY,SNDMD = NOCOMB,CPS = YES,
TSPWRRESERVE= 0, FREQREUSEMODE = LOOSE,PAOPTILEVEL= L4,
OUTHOPWROVERLOADTHRESHOLD= 15, INHOPWROVERLOADTHRESHOLD= 8, PL16QAM = 0,
PL32QAM = 0, DSSTRXOFFLINE= NO;
ACT GTRX:TRXID= 1836;