This document provides safety instructions and general information for maintaining vibratory rollers models SV212 and SV216. It covers safety precautions when repairing or inspecting the machines, working on hydraulic circuits, fuel systems, and electrical wiring. Personal protective equipment such as gloves, goggles, and protective clothing are recommended. The machines should be secured and disconnected from power sources before maintenance begins. Only trained personnel should perform repairs following the instructions in the manual.
Yanmar vi o20 excavator service repair manualufjsjekfksemm
This document contains chapters about maintenance procedures for hydraulic excavators. Chapter 1 discusses general safety cautions that should be followed when performing maintenance work. It covers correct work practices, safety precautions, preparations, cautions for disassembly/reassembly, and handling hydraulic equipment, piping, seals and hoses. Chapter 2 provides the machine's specifications, dimensions, weights and lifting capacities. Chapter 3 establishes service standards for machine performance, engines, undercarriages, controls, hydraulic equipment and implements. It also includes a list of tightening torques. Chapter 4 focuses on engine maintenance, including inspection/adjustment procedures, measurement/service data, precautions for reassembly, and details about the fuel injection system.
Claas f1200 c1200 soja getreide lexion (type 442) service repair manualfhhjsjekmdme
This document is a repair manual that provides instructions for repairing various components of an agricultural vehicle. It includes sections on general safety procedures, torque specifications for fasteners, maintenance of drive belts and chains, repair of the universal drive shaft and cam-type cut-out clutch that transfers power to front attachments, and other general repair guidelines. Diagrams and step-by-step instructions are provided for removing, installing, and adjusting various drive components.
CASE IH JX60 TRACTOR Service Repair Manualhksemd yjekmd
This is the Highly Detailed factory service repair manual for theCASE IH JX60 TRACTOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.CASE IH JX60 TRACTOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Engine
Clutch
Gearbox
Drive Lines
Front Axle Mechanical Transmission
Rear Axle and Transmission
Power Take-Off
Braking System
Hydraulic System
Steering
Front Axle and Wheels
Auxiliary Units
Electrical System
Body Work and Drive Position
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveCASE IH JX60 TRACTOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
This document provides installation and operation instructions for a VVVF controller for elevators. It includes sections on safety tips, technical specifications, installation, commissioning, and error messages. The controller connects an elevator motor to the power supply and uses variable voltage and frequency control. It has inputs and outputs to interface with elevator shaft components and safety systems. Proper grounding, ventilation, and motor protection are emphasized for safe installation and operation.
Case cx130 d standard with blade version tier 4b (final) crawler excavator se...ufjjjsefkskem
This service manual provides information on servicing the engine for CX130D crawler excavators. The document includes sections on the engine and crankcase, cooling system, fuel system, electrical systems, and fault codes. Specifications are provided for the engine, cooling system, generator, starter, and glow plug. The engine uses a common rail type electronic control injection system and has an identification process for tracing engine components.
Kioti Daedong DK451 Tractor Service Repair Manualkjksemjdmkdm
This is the Highly Detailed factory service repair manual for theKIOTI DAEDONG DK451 TRACTOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.KIOTI DAEDONG DK451 TRACTOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Chapter 1 General
Chapter 2 Engine
Chapter 3 Clutch
Chapter 4 Transmission System
Chapter 5 Rear Axle
Chapter 6 Brake
Chapter 7 Front Axle
Chapter 8 Steering System
Chapter 9 Hydraulic System
Chapter 10 Cabin System
Chapter 11 Electric System
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveKIOTI DAEDONG DK451 TRACTOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Case cx245 d sr crawler excavator service repair manualhfjsjekfksmem
This document is a service manual for a CX245D SR crawler excavator that contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, dozer blade, platform, cab, bodywork, and decals. It provides repair and maintenance instructions that should only be performed by qualified dealership personnel using the specified tools and procedures. The manufacturer will not be responsible for damages caused by unapproved parts or components used for servicing or repair.
This document is a service manual that provides information on the components and operation of an AK45 television. It includes sections describing the tuner, sound and video processing chips, display driver, power supply, microcontroller, and other integrated circuits in the system. The last section discusses service mode adjustments that can be made for production and servicing of the AK45 chassis.
Yanmar vi o20 excavator service repair manualufjsjekfksemm
This document contains chapters about maintenance procedures for hydraulic excavators. Chapter 1 discusses general safety cautions that should be followed when performing maintenance work. It covers correct work practices, safety precautions, preparations, cautions for disassembly/reassembly, and handling hydraulic equipment, piping, seals and hoses. Chapter 2 provides the machine's specifications, dimensions, weights and lifting capacities. Chapter 3 establishes service standards for machine performance, engines, undercarriages, controls, hydraulic equipment and implements. It also includes a list of tightening torques. Chapter 4 focuses on engine maintenance, including inspection/adjustment procedures, measurement/service data, precautions for reassembly, and details about the fuel injection system.
Claas f1200 c1200 soja getreide lexion (type 442) service repair manualfhhjsjekmdme
This document is a repair manual that provides instructions for repairing various components of an agricultural vehicle. It includes sections on general safety procedures, torque specifications for fasteners, maintenance of drive belts and chains, repair of the universal drive shaft and cam-type cut-out clutch that transfers power to front attachments, and other general repair guidelines. Diagrams and step-by-step instructions are provided for removing, installing, and adjusting various drive components.
CASE IH JX60 TRACTOR Service Repair Manualhksemd yjekmd
This is the Highly Detailed factory service repair manual for theCASE IH JX60 TRACTOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.CASE IH JX60 TRACTOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Engine
Clutch
Gearbox
Drive Lines
Front Axle Mechanical Transmission
Rear Axle and Transmission
Power Take-Off
Braking System
Hydraulic System
Steering
Front Axle and Wheels
Auxiliary Units
Electrical System
Body Work and Drive Position
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveCASE IH JX60 TRACTOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
This document provides installation and operation instructions for a VVVF controller for elevators. It includes sections on safety tips, technical specifications, installation, commissioning, and error messages. The controller connects an elevator motor to the power supply and uses variable voltage and frequency control. It has inputs and outputs to interface with elevator shaft components and safety systems. Proper grounding, ventilation, and motor protection are emphasized for safe installation and operation.
Case cx130 d standard with blade version tier 4b (final) crawler excavator se...ufjjjsefkskem
This service manual provides information on servicing the engine for CX130D crawler excavators. The document includes sections on the engine and crankcase, cooling system, fuel system, electrical systems, and fault codes. Specifications are provided for the engine, cooling system, generator, starter, and glow plug. The engine uses a common rail type electronic control injection system and has an identification process for tracing engine components.
Kioti Daedong DK451 Tractor Service Repair Manualkjksemjdmkdm
This is the Highly Detailed factory service repair manual for theKIOTI DAEDONG DK451 TRACTOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.KIOTI DAEDONG DK451 TRACTOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Chapter 1 General
Chapter 2 Engine
Chapter 3 Clutch
Chapter 4 Transmission System
Chapter 5 Rear Axle
Chapter 6 Brake
Chapter 7 Front Axle
Chapter 8 Steering System
Chapter 9 Hydraulic System
Chapter 10 Cabin System
Chapter 11 Electric System
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveKIOTI DAEDONG DK451 TRACTOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Case cx245 d sr crawler excavator service repair manualhfjsjekfksmem
This document is a service manual for a CX245D SR crawler excavator that contains sections covering the engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, dozer blade, platform, cab, bodywork, and decals. It provides repair and maintenance instructions that should only be performed by qualified dealership personnel using the specified tools and procedures. The manufacturer will not be responsible for damages caused by unapproved parts or components used for servicing or repair.
This document is a service manual that provides information on the components and operation of an AK45 television. It includes sections describing the tuner, sound and video processing chips, display driver, power supply, microcontroller, and other integrated circuits in the system. The last section discusses service mode adjustments that can be made for production and servicing of the AK45 chassis.
Bobcat t35.105 a telescopic handler service repair manual sn b41511001 and abovefjskeksmefmms
This document provides service and maintenance information for a Bobcat telescopic handler. It outlines safety instructions and procedures for servicing the hydraulic, hydrostatic, drive, electrical and other systems. Serial number locations are identified. The manual is intended to be used by qualified mechanics and technicians for repair and maintenance of the telescopic handler.
Toyota 2 sgk6 skid steer loader service repair manualfjskeksmefmms
This repair manual provides instructions for repairing Toyoto skid steer loaders models 2SGK6, 2SDK6, 2SDK7, and 2SDK8. It covers inspection, adjustment, and repair of the engine, chassis, and materials handling systems. Technicians are encouraged to thoroughly familiarize themselves with the manual in order to properly service and maintain the loaders. The manual contains the latest information as of March 1986 and technicians should consult subsequent service bulletins for any updates. Relevant repair manuals are also listed for reference. The document then provides sections on vehicle specifications, maintenance procedures, and repair instructions for the various components.
Toyota 2 sdk8 skid steer loader service repair manualfjskeksmefmms
This repair manual provides instructions for repairing Toyoto skid steer loaders models 2SGK6, 2SDK6, 2SDK7, and 2SDK8. It covers inspection, adjustment, and repair of the engine, chassis, and materials handling systems. Technicians are encouraged to thoroughly familiarize themselves with the manual in order to properly service and maintain the loaders. The manual contains the latest information as of March 1986 and technicians should consult subsequent service bulletins for any updates. The manual is organized into sections covering the general vehicle, engine, transmissions, axles, brakes, hydraulics and other systems.
New holland tz25 da tractor service repair manualfjskeksmefmms
This document is a repair manual for TZ18DA, TZ22DA, TZ24DA, TZ25DA tractors. It contains sections covering the engine systems, front wheel drive, differentials, hydrostatic transmission, power take-off, brakes, hydraulics, power steering, wheels, electrical systems, mid-mount mowers, and the platform. Each section provides information on repairing and servicing the corresponding component or system of the tractor. The document also includes safety information, specifications, lubrication charts, and torque specifications to aid technicians in repairing and maintaining the tractors.
New holland tl95 e tractor service repair manualfjskeksmefmms
This document is a service manual for tractor models TL60E, TL75E, TL85E, and TL95E. It contains over 10 sections that cover the engine, transmission, axles, brakes, hydraulics and other core components of the tractors. Each section includes subsections that provide detailed information, part numbers, and service procedures for maintaining and repairing the individual components.
New holland tl85 e tractor service repair manualfjskeksmefmms
This document is a service manual for tractor models TL60E, TL75E, TL85E, and TL95E. It contains sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and couplings, frames and ballasting, steering, wheels, cab climate control, electrical systems, platform, cab, bodywork, and decals. Safety rules and general safety regulations are provided at the beginning for technicians performing repairs and maintenance.
New holland tl75 e tractor service repair manualfjskeksmefmms
This document is a service manual for tractor models TL60E, TL75E, TL85E, and TL95E. It contains sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and couplings, frames and ballasting, steering, wheels, cab climate control, electrical systems, platform, cab, bodywork, and decals. Safety rules and general safety regulations are provided at the beginning for technicians servicing the equipment.
New holland tl60 e tractor service repair manualfjskeksmefmms
This document is a service manual for tractor models TL60E, TL75E, TL85E, and TL95E. It contains over 10 sections that cover the engine, transmission, axles, brakes, hydraulics and other core components of the tractors. Each section includes subsections that provide detailed information, part numbers, and service procedures for maintaining and repairing the individual components.
New holland t8.410 696110757 cvt tier 4 b tractor service repair manual (pin ...fjskeksmefmms
This document provides a service manual for New Holland T8 tractors with continuously variable transmissions (CVTs) produced from 2014 onwards. It contains over 50 sections covering all major vehicle systems, including the engine, transmission, axles, hydraulics, electrical systems, and cab controls. Each section provides information on diagnosis, maintenance and repair of the corresponding components.
New holland t8.380 696110747 cvt tier 4 b tractor service repair manual (pin ...fjskeksmefmms
This document provides a service manual for New Holland T8 tractor models with continuously variable transmissions. It contains removal and installation instructions for various engine, transmission, axle, and other components. The manual is organized by system with section numbers for locating specific components and procedures. Safety information is provided at the beginning.
New holland t8.350 696110737 cvt tier 4 b tractor service repair manual (pin ...fjskeksmefmms
This document provides a service manual for New Holland T8 tractor models with continuously variable transmissions. It contains removal and installation instructions for various engine, transmission, axle, and other components. The manual is organized by system with section numbers for locating specific components and procedures. Safety information is provided at the beginning.
New holland t8.350 696110037 pst tier 4 b tractor service repair manual [zere...fjskeksmefmms
This document provides a service manual for T8.320, T8.350, T8.380, T8.410, T8.380 SmartTraxTM, and T8.410 SmartTraxTM tractors, outlining the procedures for removing and servicing the engine and various engine components. The manual includes 20 detailed steps for removing the engine, which involve disconnecting electrical connections, coolant and hydraulic lines, removing mounting hardware, and properly capping or plugging disconnected lines and ports.
New holland t8.320 696110727 cvt tier 4 b tractor service repair manual (pin ...fjskeksmefmms
This document provides a service manual for New Holland T8 tractors with continuously variable transmissions (CVTs) produced from 2014 onwards. It contains over 50 sections covering the engine, transmission, axles, hydraulics, electrical systems, and other components. The manual is intended to guide technicians in servicing and repairing issues with the tractors. It includes part numbers, specifications, diagrams, and troubleshooting information.
New holland t8.320 696110027 pst tier 4 b tractor service repair manual [zere...fjskeksmefmms
This document is a service manual that provides information on servicing various systems for T8 tractor models including the T8.320, T8.350, T8.380, T8.410, T8.380 SmartTraxTM, and T8.410 SmartTraxTM. The manual includes sections covering the engine, transmission, axles, hydraulics, steering, electrical systems, and other components. Each section provides detailed information on components, operation, and servicing of the various tractor systems.
Kubota v2003 m-t-bg diesel engine service repair manualfjskeksmefmms
This workshop manual provides information on servicing the 03-M-E3B, 03-M-DI-E3B, and 03-M-E3BG series diesel engines. It contains four parts that cover safety, specifications, dimensions, wiring diagrams, engine identification, maintenance procedures, and troubleshooting guidelines. The manual also includes illustrations and specifications to aid technicians in servicing the engines. Refer to another workshop manual for information on diesel engine mechanisms not covered here.
Ford 575 d backhoe loader service repair manualfjskeksmefmms
This repair manual contains 11 sections covering all major systems of a backhoe loader including the engine, fuel system, electrical system, transmission, rear axle and brakes, power take-off, steering and front axle, hydraulic system and controls, cab, separating the tractor, and accessories. The document encourages downloading and clicking on a link for the complete manual.
Ford 555 d backhoe loader service repair manualfjskeksmefmms
This repair manual contains 11 sections covering all major systems of a backhoe loader including the engine, fuel system, electrical system, transmission, rear axle and brakes, power take-off, steering and front axle, hydraulic system and controls, cab, separating the tractor, and accessories. The document encourages downloading and clicking on a link for the complete manual.
Ford 455 d backhoe loader service repair manualfjskeksmefmms
This repair manual contains 11 sections covering all major systems of a backhoe loader including the engine, fuel system, electrical system, transmission, rear axle and brakes, power take-off, steering and front axle, hydraulic system and controls, cab, separating the tractor, and accessories. The document notes that the full manual can be accessed by clicking on the provided link.
Case 570 mxt series 3 loader landscaper parts catalogue manualfjskeksmefmms
This document is a parts catalog for a 570MXT Series 3 Tier 3 loader landscaper issued on May 1, 2008. It contains 9 sections describing the various systems of the machine along with an index. Section 2 covers the engine including the cylinder block, oil pump, crankcase covers, and breather. It provides part numbers and descriptions for replacement parts.
Bobcat t41.140 slpb telescopic handler service repair manual sn b41h11001 and...fjskeksmefmms
This document provides maintenance instructions and safety warnings for servicing a Bobcat telescopic handler. It outlines various safety procedures including ensuring safe operation by a qualified operator, avoiding silica dust, and proper dismantling and disposal. Fire prevention measures are described for maintenance, operation, electrical systems, hydraulics, fueling, starting, welding and grinding. Locations of serial numbers on the telescopic handler and engine are identified. Delivery inspection details are also included.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Bobcat t35.105 a telescopic handler service repair manual sn b41511001 and abovefjskeksmefmms
This document provides service and maintenance information for a Bobcat telescopic handler. It outlines safety instructions and procedures for servicing the hydraulic, hydrostatic, drive, electrical and other systems. Serial number locations are identified. The manual is intended to be used by qualified mechanics and technicians for repair and maintenance of the telescopic handler.
Toyota 2 sgk6 skid steer loader service repair manualfjskeksmefmms
This repair manual provides instructions for repairing Toyoto skid steer loaders models 2SGK6, 2SDK6, 2SDK7, and 2SDK8. It covers inspection, adjustment, and repair of the engine, chassis, and materials handling systems. Technicians are encouraged to thoroughly familiarize themselves with the manual in order to properly service and maintain the loaders. The manual contains the latest information as of March 1986 and technicians should consult subsequent service bulletins for any updates. Relevant repair manuals are also listed for reference. The document then provides sections on vehicle specifications, maintenance procedures, and repair instructions for the various components.
Toyota 2 sdk8 skid steer loader service repair manualfjskeksmefmms
This repair manual provides instructions for repairing Toyoto skid steer loaders models 2SGK6, 2SDK6, 2SDK7, and 2SDK8. It covers inspection, adjustment, and repair of the engine, chassis, and materials handling systems. Technicians are encouraged to thoroughly familiarize themselves with the manual in order to properly service and maintain the loaders. The manual contains the latest information as of March 1986 and technicians should consult subsequent service bulletins for any updates. The manual is organized into sections covering the general vehicle, engine, transmissions, axles, brakes, hydraulics and other systems.
New holland tz25 da tractor service repair manualfjskeksmefmms
This document is a repair manual for TZ18DA, TZ22DA, TZ24DA, TZ25DA tractors. It contains sections covering the engine systems, front wheel drive, differentials, hydrostatic transmission, power take-off, brakes, hydraulics, power steering, wheels, electrical systems, mid-mount mowers, and the platform. Each section provides information on repairing and servicing the corresponding component or system of the tractor. The document also includes safety information, specifications, lubrication charts, and torque specifications to aid technicians in repairing and maintaining the tractors.
New holland tl95 e tractor service repair manualfjskeksmefmms
This document is a service manual for tractor models TL60E, TL75E, TL85E, and TL95E. It contains over 10 sections that cover the engine, transmission, axles, brakes, hydraulics and other core components of the tractors. Each section includes subsections that provide detailed information, part numbers, and service procedures for maintaining and repairing the individual components.
New holland tl85 e tractor service repair manualfjskeksmefmms
This document is a service manual for tractor models TL60E, TL75E, TL85E, and TL95E. It contains sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and couplings, frames and ballasting, steering, wheels, cab climate control, electrical systems, platform, cab, bodywork, and decals. Safety rules and general safety regulations are provided at the beginning for technicians performing repairs and maintenance.
New holland tl75 e tractor service repair manualfjskeksmefmms
This document is a service manual for tractor models TL60E, TL75E, TL85E, and TL95E. It contains sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and couplings, frames and ballasting, steering, wheels, cab climate control, electrical systems, platform, cab, bodywork, and decals. Safety rules and general safety regulations are provided at the beginning for technicians servicing the equipment.
New holland tl60 e tractor service repair manualfjskeksmefmms
This document is a service manual for tractor models TL60E, TL75E, TL85E, and TL95E. It contains over 10 sections that cover the engine, transmission, axles, brakes, hydraulics and other core components of the tractors. Each section includes subsections that provide detailed information, part numbers, and service procedures for maintaining and repairing the individual components.
New holland t8.410 696110757 cvt tier 4 b tractor service repair manual (pin ...fjskeksmefmms
This document provides a service manual for New Holland T8 tractors with continuously variable transmissions (CVTs) produced from 2014 onwards. It contains over 50 sections covering all major vehicle systems, including the engine, transmission, axles, hydraulics, electrical systems, and cab controls. Each section provides information on diagnosis, maintenance and repair of the corresponding components.
New holland t8.380 696110747 cvt tier 4 b tractor service repair manual (pin ...fjskeksmefmms
This document provides a service manual for New Holland T8 tractor models with continuously variable transmissions. It contains removal and installation instructions for various engine, transmission, axle, and other components. The manual is organized by system with section numbers for locating specific components and procedures. Safety information is provided at the beginning.
New holland t8.350 696110737 cvt tier 4 b tractor service repair manual (pin ...fjskeksmefmms
This document provides a service manual for New Holland T8 tractor models with continuously variable transmissions. It contains removal and installation instructions for various engine, transmission, axle, and other components. The manual is organized by system with section numbers for locating specific components and procedures. Safety information is provided at the beginning.
New holland t8.350 696110037 pst tier 4 b tractor service repair manual [zere...fjskeksmefmms
This document provides a service manual for T8.320, T8.350, T8.380, T8.410, T8.380 SmartTraxTM, and T8.410 SmartTraxTM tractors, outlining the procedures for removing and servicing the engine and various engine components. The manual includes 20 detailed steps for removing the engine, which involve disconnecting electrical connections, coolant and hydraulic lines, removing mounting hardware, and properly capping or plugging disconnected lines and ports.
New holland t8.320 696110727 cvt tier 4 b tractor service repair manual (pin ...fjskeksmefmms
This document provides a service manual for New Holland T8 tractors with continuously variable transmissions (CVTs) produced from 2014 onwards. It contains over 50 sections covering the engine, transmission, axles, hydraulics, electrical systems, and other components. The manual is intended to guide technicians in servicing and repairing issues with the tractors. It includes part numbers, specifications, diagrams, and troubleshooting information.
New holland t8.320 696110027 pst tier 4 b tractor service repair manual [zere...fjskeksmefmms
This document is a service manual that provides information on servicing various systems for T8 tractor models including the T8.320, T8.350, T8.380, T8.410, T8.380 SmartTraxTM, and T8.410 SmartTraxTM. The manual includes sections covering the engine, transmission, axles, hydraulics, steering, electrical systems, and other components. Each section provides detailed information on components, operation, and servicing of the various tractor systems.
Kubota v2003 m-t-bg diesel engine service repair manualfjskeksmefmms
This workshop manual provides information on servicing the 03-M-E3B, 03-M-DI-E3B, and 03-M-E3BG series diesel engines. It contains four parts that cover safety, specifications, dimensions, wiring diagrams, engine identification, maintenance procedures, and troubleshooting guidelines. The manual also includes illustrations and specifications to aid technicians in servicing the engines. Refer to another workshop manual for information on diesel engine mechanisms not covered here.
Ford 575 d backhoe loader service repair manualfjskeksmefmms
This repair manual contains 11 sections covering all major systems of a backhoe loader including the engine, fuel system, electrical system, transmission, rear axle and brakes, power take-off, steering and front axle, hydraulic system and controls, cab, separating the tractor, and accessories. The document encourages downloading and clicking on a link for the complete manual.
Ford 555 d backhoe loader service repair manualfjskeksmefmms
This repair manual contains 11 sections covering all major systems of a backhoe loader including the engine, fuel system, electrical system, transmission, rear axle and brakes, power take-off, steering and front axle, hydraulic system and controls, cab, separating the tractor, and accessories. The document encourages downloading and clicking on a link for the complete manual.
Ford 455 d backhoe loader service repair manualfjskeksmefmms
This repair manual contains 11 sections covering all major systems of a backhoe loader including the engine, fuel system, electrical system, transmission, rear axle and brakes, power take-off, steering and front axle, hydraulic system and controls, cab, separating the tractor, and accessories. The document notes that the full manual can be accessed by clicking on the provided link.
Case 570 mxt series 3 loader landscaper parts catalogue manualfjskeksmefmms
This document is a parts catalog for a 570MXT Series 3 Tier 3 loader landscaper issued on May 1, 2008. It contains 9 sections describing the various systems of the machine along with an index. Section 2 covers the engine including the cylinder block, oil pump, crankcase covers, and breather. It provides part numbers and descriptions for replacement parts.
Bobcat t41.140 slpb telescopic handler service repair manual sn b41h11001 and...fjskeksmefmms
This document provides maintenance instructions and safety warnings for servicing a Bobcat telescopic handler. It outlines various safety procedures including ensuring safe operation by a qualified operator, avoiding silica dust, and proper dismantling and disposal. Fire prevention measures are described for maintenance, operation, electrical systems, hydraulics, fueling, starting, welding and grinding. Locations of serial numbers on the telescopic handler and engine are identified. Delivery inspection details are also included.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
8. SECTION 00 - GENERAL INSTRUCTIONS - CHAPTER 1 1
7-29530 - 04-2001 SV212 - SV216
SECTION 00 - MAINTENANCE
Chapter 1 - General Instructions
CONTENTS
Section 10000 Description Page
Introduction .................................................................................................... 1
Safety instructions ......................................................................................... 2
Environmental measures and health precautions ...................................... 5
Product identification .................................................................................... 7
Torque specifications..................................................................................... 8
INTRODUCTION
This series of Vibratory Rollers is suitable for compac-
tion of all kinds of ground and for large and average-
scale groundwork in highway construction (construction
of motorways, railways, aiports), in hydro-engineering
(construction of dams), in building construction (indus-
trial areas, ports), and the like.
These machines are manufactured in conformity with
the latest developments and standards, which ensure
their safe function.
If the machine is used incorrectly, by untrained opera-
tors or for other purposes than those stipulated above,
there is a danger of an accident or damage to the
equipment.
The main purpose of this manual is to give the informa-
tion necessary for carrying out assembly and disas-
sembly of the machine as well as service repairs of
main assemblies of the equipment. It contains technical
and installation data, instructions on how to adjust the
machine and how to use special tools, fixtures and aids.
The manufacturer continuously seeks to make product
improvements on the basis of experience and latest
developments in the field.
For this reason, the manufacturer may make some
changes in drawings, descriptions and designs in this
manual.
9. 2 SECTION 00 - GENERAL INSTRUCTIONS - CHAPTER 1
SV212 - SV216 7-29530 - 04-2001
RIGHT, LEFT, FRONT AND REAR OF THE MACHINE
As used in this manual, the terms “right”, “left”, “front”
and “rear” indicate the sides of the machine as seen
from the operator’s seat.
A. FRONT
B. REAR
C. RIGHT-HAND SIDE
D. LEFT-HAND SIDE
1CS00M511
A
B
CD
10. SECTION 00 - GENERAL INSTRUCTIONS - CHAPTER 1 3
7-29530 - 04-2001 SV212 - SV216
SAFETY INSTRUCTIONS
GENERAL SAFETY INSTRUCTIONS
The following safety instructions must be observed by
ALL repairing the machine.
1. Repairs may be carried out by skilled, trained and
experienced personnel only.
2. When performing repairs, always use our shop
manual. Special instructions for the assembly work
are given in individual chapters of the manual.
3. Before putting the machine into operation acquaint
yourselves with the machine controls as explained
in the “Operator’s Manual” and make sure that you
are perfectly familiar with the machine.
4. Do not use the machine if you do not fully under-
stand all controls and until you know how the
machine works.
5. Familiarize yourself with the area where you will
work.
6. Do not carry out any redesign work or modifica-
tions on the machine because you could compro-
mise the safety of the equipment.
7. Original parts and accessories have been
designed especially for this machine.
8. Installation and use of spare parts not supplied by
the manufacturer of the machine or not authorized
by him can have negative effects on operational
characteristics and safe operation of the machine.
REPAIRING AND INSPECTING THE MACHINE
1. Wear working clothes and boots.
2. Use gloves when handling oils, fuel or coolant.
3. Protect your eyes with goggles or a shield when
handling the battery.
4. Place the equipment on a flat and firm surface
before starting repair. Secure the machine to pre-
vent spontaneous movement.
5. Secure the frame of the machine and the drum to
prevent rotation using a locking pin and a draw bar.
6. Before starting work remove the ignition key, dis-
connect the batteries and let hot parts cool down.
7. Attach a "Do not operate" warning note to the
steering wheel and leave it there for the duration of
the service work.
8. Wash the equipment thoroughly. If you use steam,
do not expose electrical components and insula-
tion directly to the steam, or otherwise cover them
beforehand.
9. Keep all parts absolutely clean when dismantling,
mounting, and servicing each assembly. Protect
removed parts from getting soiled.
10. Clean the surface of dismantled parts and do the
necessary to ensure adequately dust-free working
conditions and a suitable storage area.
11. Be careful when handling cleaning agents. Do not
use petrol or other easy inflammable materials for
cleaning.
12. Dry the cleaned parts and immediately cover with
anticorrosive protective oil- never install corroded
parts.
13. Tools, hoists, safety equipment on chains, and
other additional items must be serviceable and in
good condition.
14. Use hoists and fasteners (ropes, chains) that have
sufficient lifting capacity and are in good condition.
15. Make sure that there is enough fresh air supply
when starting up the equipment in an enclosed
area.
11. 4 SECTION 00 - GENERAL INSTRUCTIONS - CHAPTER 1
SV212 - SV216 7-29530 - 04-2001
16. Before operating the equipment make sure there is
nobody on the machine or close by. Starting up of
the machine must always be announced with an
audible alarm, also after any pause in operation
before the equipment is restarted. Those present
on the machine and dangerously close by must
leave the machine after the alarm has been
sounded.
17. Do not adjust moving equipment.
18. When working (adjusting) on a running engine,
avoid touching hot and rotating parts. During work
on a running engine, another person must be
present that can easily access the emergency
switch and must be in contact at all times with the
person performing the adjustment, to be able to
switch off the engine immediately when necessary.
19. Use only approved makes of motor, gear and
hydraulic oil and coolant.
WORKING ON HYDRAULIC CIRCUITS
1. Make sure that no hydraulic circuit is under pres-
sure before opening it. Hydraulic oil leaks under
pressure may penetrate your skin and cause seri-
ous injury.
2. Mark all parts, hoses and pipes before removing
them.
3. Do not operate hydraulic pumps and hydraulic
motors without oil.
4. There is danger of being scalded when handling
hot oil.
5. Do not warm oil to temperatures above 160°C
(320°F)- oil or its fumes may ignite.
6. For cleaning and wiping hydraulic parts use such
textiles that do not leave traces of lint.
7. When reassembling parts use hydraulic oil - not
grease - as a lubricant.
8. Clean screws and bolts carefully before installation,
wash hoses and pipes and blow them through
using compressed air.
9. Always use new packing in sealing areas.
10. Fill new components with hydraulic oil before instal-
lation.
11. Rinse the hydraulic circuit after replacing a hydrau-
lic component; clean the hydraulic reservoir as
well.
12. Replace the oil filter cartridge.
13. Fill the hydraulic circuit with pure oil of the recom-
mended viscosity, but only when the engine has
been stopped.
14. Wipe off excess oil.
15. Check connections for tightness and any oil leaks,
before applying pressure to the system.
16. Do not adjust safety valves.
17. After all work has been finished, recheck all con-
nections and replace all safety items.
18. After finishing the work put all protective devices
back in place.
19. After putting the machine into operation.
• Check the level in the hydraulic reservoir.
• Check the output pressure of hydraulic pumps if
they have been replaced as well as safety valve
pressure. Carry out the measurements at a tem-
perature of 40°C (104°F).
WORKING ON THE FUEL SYSTEM
Mixtures of gasoline and diesel (winter fuel) are as
inflammable as gasoline.
1. Do not refuel in closed areas.
2. Wipe off excess fuel.
3. Do not smoke when working on the fuel system
and do not use naked lights. There is a danger
of fire.
12. SECTION 00 - GENERAL INSTRUCTIONS - CHAPTER 1 5
7-29530 - 04-2001 SV212 - SV216
WORKING ON ELECTRICAL WIRING
1. Disconnect the battery when carrying out any
repairs on the charging circuit to avoid accidental
short-circuits.
2. When dismantling, first disconnect the cable from
the negative pole (-), then the cable from the posi-
tive one (+).
3. Do not disconnect batteries when the engine is
running.
4. Connect the “minus” pole of the battery to the
chassis and the “plus” pole to terminal “B+” from
the alternator. In case of opposite connection the
whole semi-conductor device can be destroyed.
5. When starting with an auxiliary external supply, do
not disconnect the supply sooner than the battery
of the machine is connected. Make sure of the
starting voltage of the auxiliary external supply (for
24 V).
6. Do not put the alternator into no-load operation, i.
e. with the wire disconnected from the “+” terminal
and connected to the “D+” terminal.
7. Do not check the presence of voltage in the wire by
sparking it on the chassis of the equipment.
8. Do not do anything that produces sparks.
9. When handling batteries, use protective rubber
gloves and goggles.
10. Protect your skin and clothes from stains caused
by electrolyte or lead particles.
11. If electrolyte gets into your eye, rinse it with running
water for a few minutes. Then see a doctor as soon
as possible.
12. When electrolyte stains your skin or clothes, take
off your clothes, wash the stained area with soapy
water or with a solution of baking soda and water
and see a doctor.
13. In the event of accidentally swallowing electrolyte,
drink as much milk or water as possible or a solu-
tion of milk of magnesia and immediately see a
doctor.
14. Never pour distilled water into the cells unless the
operation of the machine or charging outside the
machine follows. In this case the battery would dis-
charge rapidly.
15. Never add sulfuric acid (H2SO4).
16. Do not overturn the batteries because electrolyte
could run out of the air vents in the battery.
17. If acid (electrolyte) is spilled, rinse the area with
water and neutralize it with lime.
18. When the batteries are being charged, hydrogen is
released and, mixed with air, makes an explosive,
easily combustible mixture. Do not use naked lights
and do not smoke.
WELDING ON THE MACHINE
Before starting arc welding, disconnect all parts with
semi-conductors from electrical wiring, i.e.:
• engine alternator,
• hourmeter,
• control unit under the instrument panel,
• earth both the supply and the machine that is
being repaired,
• protect the supply point against moisture,
• place the ground terminal close to the welded
joint,
• when parts are welded or when the machine is
in the suspended position, insulate the point of
current transfer to avoid current entering the
hoist, or use a non-conducting rope.
SEALS
1. Always use new packing.
2. You can obtain packing kits in spare part form.
HARDWARE TORQUE
1. Use a torque wrench to obtain the right hardware
torque.
2. Fastening screws and nuts of the given grade are
tightened according to the table.
3. Screw grade is shown visibly on the screw head.
4. Hardware torque is given in the tables.
5. Threaded connections of hydraulic circuits are
tightened as specified in the tables.
6. The given hardware torque specifications are valid
for dry screw threads.
7. Use new self-locking nuts only.
13. 6 SECTION 00 - GENERAL INSTRUCTIONS - CHAPTER 1
SV212 - SV216 7-29530 - 04-2001
ENVIRONMENTAL MEASURES AND HEALTH PRECAUTIONS
When repairing the machine, observe the general prin-
ciples of health protection and environment protection,
along with all laws, regulations, and guidelines related
to these problems, as applicable to the territory where
the machine is used.
HYGIENE
1. Oil products, coolants, battery acids, and paints
including thinners can be harmful to your health
and they can cause serious injury.
2. It is necessary to observe consistently safety and
health instructions enclosed with the products and
to use personal protective aids when handling
them.
3. Personnel in contact with these products during
servicing must observe the general principles relat-
ing to conservation and keep in mind safety and
health guidelines as given by manufacturers of
such products, especially the following:
• protection of eyes and skin when working with
batteries,
• protection of the skin when handling oil prod-
ucts, paint, and coolants,
• workers should wash their hands properly after
finishing their work and apply proper healing
hand lotions,
• when working with the cooling system it neces-
sary to observe the instructions in the manuals
supplied with the machine.
4. Oil products, coolants, batteries, and paint includ-
ing organic thinners as well as cleaners and pre-
servatives should be always stored in their original
packaging and properly labeled. Do not store such
products in unlabeled bottles and other containers
because there is a danger of confusion. Confusion
with food or drinks is especially dangerous.
5. If your skin or eyes are by accidentally splashed or
fumes inhaled, apply first aid immediately. In case
of accidental consumption of such products see
your doctor immediately.
ECOLOGICAL PRECAUTIONS
1. Contents of machine systems and some parts of
the machine, when no longer in use, represent
great risks to the environment.
2. The following products especially belong to this
category:
• both organic and synthetic lubricating materials,
oils and fuel,
• coolants,
• battery acids and batteries themselves,
• cleaning agents and preservatives,
• all removed filters and filter elements,
• all used and discarded hydraulic and fuel hoses,
rubber - metals and the other elements exposed
to the above products.
3. The above parts and materials must be handled,
after they had been discarded, in accordance with
prevailing national regulations on environmental
protection and in conformance with directives relat-
ing to health conservation.
4. When hydraulic liquids, fuel, cooling systems and
their components are being removed it is neces-
sary to prevent their infiltration into the ground by
using retaining vessels and by plugging all orifices.
5. In the event of leakage, the contaminated area-
must be immediately dried with sawdust, Vapex, or
similar.
6. Contaminated earth must be removed to prevent
further infiltration. Then the soil and absorbing
material must be disposed of safely.
14. SECTION 00 - GENERAL INSTRUCTIONS - CHAPTER 1 7
7-29530 - 04-2001 SV212 - SV216
FIRE PRECAUTIONS
1. From a fire risk point of view, the inflammable liq-
uids used are divided into the following risk classes
II. Risk class
- oil
IV. Risk class
- mineral oils
- lubricants
- antifreeze
2. The place where oil is being changed must not sit-
uated in an area where there is danger of explo-
sions or fire.
3. Notices showing that smoking and naked lights are
not allowed must be installed there.
4. The receptacles used to catch drained inflammable
liquids must be of adequate capacity.
5. Portable fire-extinguishers must be available.
6. Oil and oil products should be handled in special
containers, e.g. metal barrels, drums or cans.
7. Liquid containers must be properly closed when
stored.
8. The containers should have an air vent. They
should be always stored with the air vent up and
there must be measures taken to prevent leakage.
9. The vessels must be labeled with indelible inscrip-
tions showing their contents and inflammability
class.
15. 8 SECTION 00 - GENERAL INSTRUCTIONS - CHAPTER 1
SV212 - SV216 7-29530 - 04-2001
PRODUCT IDENTIFICATION
Serial and type numbers are important for machine
identification and/or in case of warranty claims. A name
plate with basic machine data is attached to the left side
of the frame below the cab.
A plate with the serial number of the Cummins engine is
attached to the fuel injection pump drive housing.
Serial numbers and data relating to major components
may be found on the components concerned.
CD00M008 2
CD00M009 3
16. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
17. SECTION 00 - GENERAL INSTRUCTIONS - CHAPTER 1 9
7-29530 - 04-2001 SV212 - SV216
TORQUE SPECIFICATIONS
FASTENING HARDWARE
Inspection and re-tightening
1. Regularly check that hardware is not loose.
2. Use torque limiting wrenches to tighten screws and
nuts.
Screws with metric threads
NOTE: Lock nuts may be used a maximum of 3 times
when approved.
Screw
size
Torque
For screws
5.8 (5 S)
For screws
8.8 (8 G)
For screws
10.9 (10 K)
Nm lb-ft Nm lb-ft Nm lb-ft
M4 2 1 3 2 4 3
M5 4 3 6 4 8 6
M6 7 5 10 7 14 10
M8 16 12 22.5 17 32.5 24
M10 31.5 23 44 32 62 46
M12 53 39 75 55 105 77
M14 79 58 118 87 165 122
M16 113 83 165 122 226 167
M18 172 127 245 181 343 253
M20 226 167 314 232 441 325
M22 284 209 392 289 559 412
M24 392 289 549 405 755 557
19. SECTION 00 - GENERAL INSTRUCTIONS - CHAPTER 1 11
7-29530 - 04-2001 SV212 - SV216
PLUGS AND NECKS
Table of tightening torques for necks and plugs with tight-
ening edge, or with flat packing:
Neck torque
Ø Nm lb-ft
G 1/8“ 25 18
G 1/4“ 40 30
G 3/8“ 95 70
G 1/2“ 130 96
G 3/4“ 250 184
G 1“ 400 295
G 11/4“ 600 443
G 11/2“ 800 590
M 10x1 25 18
M 12x1.5 30 22
M 14x1.5 50 37
M 16x1.5 60 44
M 18x1.5 60 44
M 20x1.5 140 103
M 22x1.5 140 103
M 26x1.5 220 162
M 27x1.5 250 184
M 33x1.5 400 295
M 42x1.5 600 443
M 48x1.5 800 590
4CS01C502
Ø Ø
Plugs torque
Ø Nm lb-ft
G 1/8“ 15 11
G 1/4“ 33 24
G 3/8“ 70 52
G 1/2“ 90 66
G 3/4“ 150 111
G 1“ 220 162
G 11/4“ 600 443
G 11/2“ 800 590
M 10x1 13 10
M 12x1.5 30 22
M 14x1.5 40 30
M 16x1.5 60 44
M 18x1.5 70 52
M 20x1.5 90 66
M 22x1.5 100 74
M 26x1.5 120 89
M 27x1.5 150 111
M 33x1.5 250 184
M 42x1.5 400 295
M 48x1.5 500 369
CS01C503 5
Ø