This document is a service manual that contains information for servicing and repairing various tractor models including the PUMA 150, 165, and 175 CVT tractors. The manual contains over 50 sections organized by major vehicle systems such as the engine, transmission, hydraulics, steering, and electrical systems. Each section provides detailed information, part numbers, and repair instructions for components within that system.
New holland t7.175 tier 4 b (final) tractor service repair manualfujjsjkkekmm
This document is a service manual for New Holland T7 tractor models T7.175, T7.190, T7.210, and T7.225. It contains information on engine systems, transmission, 4WD system, front and rear axles, PTO, brakes, hydraulics, pneumatics, hitches and couplings, frames, steering, wheels, cab climate control, electrical systems, and platform/cab components. Safety guidelines are provided at the beginning for working on the tractor. The manual is organized by system with section numbers that correspond to component-level repair information.
Case ih puma 215 cvx tractor service repair manualudfjsjefjkekm
This document provides a service manual for Puma tractors, including the Puma 170 CVX, Puma 185 CVX, Puma 200 CVX, Puma 215 CVX, and Puma 230 CVX models. The manual contains an introduction on how to use the manual and navigate its contents. The contents section lists all systems and components covered in the manual such as the engine, transmission, hydraulics, electrical systems, and more. Each section contains technical data, functional descriptions, diagnostics, and service procedures.
Case ih puma 200 cvt tier 4 b (final) tractor service repair manualfjkskefkmem
Remove the engine as follows:
1. Disconnect the battery ground cable.
2. Disconnect all wiring harnesses and electrical connectors from the engine.
3. Disconnect the fuel lines from the fuel injection pump and fuel filter. Plug the lines to prevent contamination.
4. Disconnect the hydraulic lines from the hydraulic pump. Plug the lines to prevent contamination.
5. Disconnect the cooling lines from the engine. Plug the lines to prevent contamination.
6. Disconnect the exhaust pipe from the exhaust manifold.
7. Remove the engine mounting bolts.
8. Attach lifting equipment such as a hoist or fork lift to the engine lifting eyes. Lift the engine from the machine and
Case ih puma 220 tier 4 b (final) tractor service repair manualfujskeksmemqa
This document is a service manual for Puma tractors that provides specifications and repair instructions for various tractor systems. It includes sections on the engine, transmission, axles, hydraulics, pneumatics, steering, cab climate control, and electrical systems. Each section includes subsections on specific components of those systems.
Case ih puma 185 cvt tier 4 b (final) tractor service repair manualufjsjekjkeme
Remove the engine as follows:
1. Disconnect the battery ground cable.
2. Disconnect all wiring harnesses and electrical connectors from the engine.
3. Disconnect the fuel lines from the fuel injection pump and fuel filter. Plug the lines to prevent contamination.
4. Disconnect the hydraulic lines from the hydraulic pump. Plug the lines to prevent contamination.
5. Disconnect the cooling lines from the engine. Plug the lines to prevent contamination.
6. Disconnect the exhaust system from the engine.
7. Disconnect the clutch linkage from the clutch housing.
8. Remove the engine mounting bolts.
9. Attach lifting equipment to the engine lifting eyes and carefully lift the engine
Case ih puma 185 cvt tier 4 b (final) tractor service repair manualfjsekkdkmem
This document is a service manual for Puma tractors that provides specifications and repair instructions for various tractor systems. It includes sections on the engine, transmission, axles, hydraulics, pneumatics, steering, cab climate control, and electrical systems. Each section includes subsections on specific components that describe their function and repair procedures.
Case ih puma 240 cvt tier 4 b (final) tractor service repair manualfujskeksmemqa
This document is a service manual that provides maintenance and repair instructions for various components of PUMA tractors, including the engine, transmission, axles, brakes, hydraulics, electrical systems, and cab components. It includes removal and installation procedures, specifications, and troubleshooting information for technicians servicing these machines.
Case ih puma 240 cvt tier 4 b (final) tractor service repair manualufujjdjkskemme
This document is a service manual that provides maintenance and repair instructions for various components of PUMA tractors, including the engine, transmission, axles, brakes, hydraulics, electrical systems, and cab components. It includes removal and installation procedures, specifications, and troubleshooting information for technicians servicing these machines.
New holland t7.175 tier 4 b (final) tractor service repair manualfujjsjkkekmm
This document is a service manual for New Holland T7 tractor models T7.175, T7.190, T7.210, and T7.225. It contains information on engine systems, transmission, 4WD system, front and rear axles, PTO, brakes, hydraulics, pneumatics, hitches and couplings, frames, steering, wheels, cab climate control, electrical systems, and platform/cab components. Safety guidelines are provided at the beginning for working on the tractor. The manual is organized by system with section numbers that correspond to component-level repair information.
Case ih puma 215 cvx tractor service repair manualudfjsjefjkekm
This document provides a service manual for Puma tractors, including the Puma 170 CVX, Puma 185 CVX, Puma 200 CVX, Puma 215 CVX, and Puma 230 CVX models. The manual contains an introduction on how to use the manual and navigate its contents. The contents section lists all systems and components covered in the manual such as the engine, transmission, hydraulics, electrical systems, and more. Each section contains technical data, functional descriptions, diagnostics, and service procedures.
Case ih puma 200 cvt tier 4 b (final) tractor service repair manualfjkskefkmem
Remove the engine as follows:
1. Disconnect the battery ground cable.
2. Disconnect all wiring harnesses and electrical connectors from the engine.
3. Disconnect the fuel lines from the fuel injection pump and fuel filter. Plug the lines to prevent contamination.
4. Disconnect the hydraulic lines from the hydraulic pump. Plug the lines to prevent contamination.
5. Disconnect the cooling lines from the engine. Plug the lines to prevent contamination.
6. Disconnect the exhaust pipe from the exhaust manifold.
7. Remove the engine mounting bolts.
8. Attach lifting equipment such as a hoist or fork lift to the engine lifting eyes. Lift the engine from the machine and
Case ih puma 220 tier 4 b (final) tractor service repair manualfujskeksmemqa
This document is a service manual for Puma tractors that provides specifications and repair instructions for various tractor systems. It includes sections on the engine, transmission, axles, hydraulics, pneumatics, steering, cab climate control, and electrical systems. Each section includes subsections on specific components of those systems.
Case ih puma 185 cvt tier 4 b (final) tractor service repair manualufjsjekjkeme
Remove the engine as follows:
1. Disconnect the battery ground cable.
2. Disconnect all wiring harnesses and electrical connectors from the engine.
3. Disconnect the fuel lines from the fuel injection pump and fuel filter. Plug the lines to prevent contamination.
4. Disconnect the hydraulic lines from the hydraulic pump. Plug the lines to prevent contamination.
5. Disconnect the cooling lines from the engine. Plug the lines to prevent contamination.
6. Disconnect the exhaust system from the engine.
7. Disconnect the clutch linkage from the clutch housing.
8. Remove the engine mounting bolts.
9. Attach lifting equipment to the engine lifting eyes and carefully lift the engine
Case ih puma 185 cvt tier 4 b (final) tractor service repair manualfjsekkdkmem
This document is a service manual for Puma tractors that provides specifications and repair instructions for various tractor systems. It includes sections on the engine, transmission, axles, hydraulics, pneumatics, steering, cab climate control, and electrical systems. Each section includes subsections on specific components that describe their function and repair procedures.
Case ih puma 240 cvt tier 4 b (final) tractor service repair manualfujskeksmemqa
This document is a service manual that provides maintenance and repair instructions for various components of PUMA tractors, including the engine, transmission, axles, brakes, hydraulics, electrical systems, and cab components. It includes removal and installation procedures, specifications, and troubleshooting information for technicians servicing these machines.
Case ih puma 240 cvt tier 4 b (final) tractor service repair manualufujjdjkskemme
This document is a service manual that provides maintenance and repair instructions for various components of PUMA tractors, including the engine, transmission, axles, brakes, hydraulics, electrical systems, and cab components. It includes removal and installation procedures, specifications, and troubleshooting information for technicians servicing these machines.
Case ih puma 220 cvt tier 4 b (final) tractor service repair manualfjskkddmmmse
This document is a service manual for Puma tractors that provides specifications and repair instructions for various tractor systems. It includes sections on the engine, transmission, axles, hydraulics, pneumatics, steering, cab climate control, and electrical systems. Each section includes subsections on specific components that describe their function and repair procedures.
Case ih puma 185 tier 4 b (final) tractor service repair manualufjsjekjkeme
Remove the engine as follows:
1. Disconnect the battery ground cable.
2. Disconnect all wiring harnesses and electrical connectors from the engine.
3. Disconnect the fuel lines from the fuel injection pump and fuel filter. Plug the lines to prevent contamination.
4. Disconnect the hydraulic lines from the hydraulic pump. Plug the lines to prevent contamination.
5. Disconnect the cooling lines from the engine. Plug the lines to prevent contamination.
6. Disconnect the exhaust system from the engine.
7. Disconnect the clutch linkage from the clutch housing.
8. Remove the engine mounting bolts.
9. Attach lifting equipment to the engine lifting eyes and carefully lift the engine
Case ih puma 200 cvt tier 4 b (final) tractor service repair manualfjjsekekskmdm
This document is a service manual for Puma tractors that provides specifications and repair instructions for various tractor systems. It includes sections on the engine, transmission, axles, hydraulics, pneumatics, steering, cab climate control, and electrical systems. Each section includes subsections on specific components of those systems.
Case ih puma 220 cvt tier 4 b (final) tractor service repair manualfjjskewerkskem
Remove the engine as follows:
1. Disconnect the battery ground cable.
2. Disconnect all wiring harness connectors from the engine.
3. Disconnect the fuel lines from the fuel injection pump. Plug the lines to prevent contamination.
4. Disconnect the engine oil cooler lines. Plug the lines to prevent contamination.
5. Disconnect the engine coolant hoses. Plug the hoses to prevent contamination.
6. Disconnect the exhaust pipe from the turbocharger.
7. Disconnect the transmission control linkage from the engine.
8. Attach lifting equipment to the engine lifting eyes and remove the engine from the machine.
Case ih puma 220 cvt tier 4 b (final) tractor service repair manualufjjsjekdkemme
Remove the engine as follows:
1. Disconnect the battery ground cable.
2. Disconnect all wiring harness connectors from the engine.
3. Disconnect the fuel lines from the fuel injection pump. Plug the lines to prevent contamination.
4. Disconnect the hydraulic lines from the hydraulic pump. Plug the lines to prevent contamination.
5. Disconnect the cooling lines from the engine. Plug the lines to prevent contamination.
6. Disconnect the exhaust system from the engine.
7. Remove the engine mounting bolts.
8. Attach lifting equipment to the engine lifting eyes and remove the engine from the machine.
Case ih puma 200 tier 4 b (final) tractor service repair manualfjjsekekskmdm
This document is a service manual that provides maintenance and repair instructions for various components of PUMA tractors, including the engine, transmission, axles, brakes, hydraulics, electrical systems, and cab components. It includes removal and installation procedures, specifications, and troubleshooting information for technicians servicing these machines.
Case ih puma 220 tier 4 b (final) tractor service repair manualufujjdjkskemme
Remove the engine as follows:
1. Disconnect the battery ground cable.
2. Disconnect all wiring harness connectors from the engine.
3. Disconnect the fuel lines from the fuel injection pump. Plug the lines to prevent contamination.
4. Disconnect the hydraulic lines from the hydraulic pump. Plug the lines to prevent contamination.
5. Disconnect the cooling lines from the engine. Plug the lines to prevent contamination.
6. Disconnect the exhaust pipe from the exhaust manifold.
7. Remove the engine mounting bolts.
8. Attach lifting equipment to the engine lifting eyes and remove the engine from the machine.
Case ih puma 200 tier 4 b (final) tractor service repair manualfjkskefkmem
This document is a service manual for Puma tractors that provides specifications and repair instructions for various tractor systems. It includes sections on the engine, transmission, axles, hydraulics, pneumatics, steering, cab climate control, and electrical systems. Each section includes subsections on specific components that describe their function and repair procedures.
Case ih puma 185 tier 4 b (final) tractor service repair manualfjsekkdkmem
Remove the engine as follows:
1. Disconnect the battery ground cable.
2. Disconnect all wiring harnesses and electrical connectors from the engine.
3. Disconnect the fuel lines from the fuel injection pump and fuel filter. Plug the lines to prevent contamination.
4. Disconnect the hydraulic lines from the hydraulic pump. Plug the lines to prevent contamination.
5. Disconnect the cooling lines from the engine. Plug the lines to prevent contamination.
6. Disconnect the exhaust system from the engine.
7. Disconnect the clutch linkage from the clutch housing.
8. Remove the engine mounting bolts.
9. Attach lifting equipment to the engine lifting eyes and carefully lift the engine
Case ih puma 200 cvx tractor service repair manualfujskksemmk
This document is a service manual for Puma 170 CVX, Puma 185 CVX, Puma 200 CVX, Puma 215 CVX, and Puma 230 CVX tractors. It contains information on the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, pneumatic system, hitches and couplings, frames and ballasting, steering, wheels, cab climate control, and electrical systems. The manual provides part numbers and repair instructions for components of each system.
Massey Ferguson MF290 XTRA TRACTORS (INDIA) Parts Catalogue Manualufjjsjekkeemme
This is the Highly Detailed factory Parts manual for theMASSEY FERGUSON MF290 XTRA TRACTORS, this Parts Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.MASSEY FERGUSON MF290 XTRA TRACTORS Parts Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this Parts manual is an inexpensive way to keep your vehicle working properly.
Parts Manual Covers:
Engine and Equipment
Clutch
Transmission
Rear Axle
Linkage
PTO-Drive Mechanism
Front Axle
Hydraulics
Electric Equipment and Instrument
Electronic Equipment
Sheet Metal
And more...
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveMASSEY FERGUSON MF290 XTRA TRACTORS Parts Manual.
Thanks for visiting!
New holland tj325 tractor service repair manualufjjsjekkeemme
- This document contains safety warnings and instructions for servicing agricultural equipment.
- It instructs technicians to turn off the engine, set the parking brake, block the wheels, and remove keys before servicing to prevent injury.
- Warnings advise wearing proper protective equipment like hard hats and gloves, and operating controls only from the operator's seat.
Massey ferguson mf 363 lx tractor service parts catalogue manual (part number...ufjjsjekkeemme
This document contains parts listings and descriptions for the engine of a Massey Ferguson 363 LX tractor. It includes 6 pages detailing over 80 individual parts for the engine block, crankshaft, cylinder head, and other components. Each part is listed with its number, quantity, description, and other identifying information. The document provides extensive reference information for maintenance and repair of this tractor engine.
Massey ferguson mf 350 tractor service parts catalogue manual (part number 8...ufjjsjekkeemme
This document provides parts information for a Massey Ferguson 350 tractor engine. It includes 4 pages of documentation with diagrams and lists of parts, part numbers, quantities and descriptions for the engine block, cylinder head, crankshaft, pistons, connecting rods and other engine components. Over 100 individual parts are detailed across the 4 pages of documentation.
The document is a parts catalog for a Massey Ferguson 6711 tractor. It contains 24 pages of detailed parts listings for various systems of the tractor, including the engine, axles, steering, brakes, hydraulics, electrical, cab, chassis, and implements. Each page lists the relevant part numbers, quantities, descriptions, and any additional comments for a specific assembly or system. The parts catalog provides a comprehensive listing of components for the tractor broken down by section.
Massey ferguson 6140 tractor service parts catalogue manual (part number 163...ufjjsjekkeemme
This document provides parts information for the engine of a Massey Ferguson 6140 tractor with serial number 1637275. It includes 42 line items with part numbers, quantities, descriptions and other details for the engine block, cylinder head, crankshaft, pistons, connecting rods and other engine components. It also provides references to other documents for additional part information.
Massey ferguson 6120 tractor service parts catalogue manual (part number 163...ufjjsjekkeemme
This document provides parts information for the engine of a Massey Ferguson 6120 tractor with serial number 1637273. It includes:
1. A list of 32 parts for the engine and their descriptions.
2. A list of 28 parts for the cylinder block and their descriptions.
3. A list of 23 parts for the crankshaft, pistons, and connecting rods and their descriptions.
Massey ferguson 5613 tractor (dyna 6) (e023046 g307020) service parts catal...ufjjsjekkeemme
This document provides a table of contents and parts lists for a Massey Ferguson 5613 tractor. The table of contents lists 24 sections that provide information on various tractor systems and components. Subsequent pages provide detailed parts lists and descriptions for the engine, cylinder block, crankshaft, camshaft, cylinder head, and intake manifold. Over 100 individual parts are detailed across 7 pages of the document.
Massey ferguson 5612 tractor (dyna 6) (d295023 g165048) service parts catal...ufjjsjekkeemme
The document is a table of contents for the service manual of a Massey Ferguson 5612 tractor. It lists 24 sections that make up the manual, including the engine, axles, steering system, drive train, brakes, hydraulics, electrical system, cab, chassis, decals, wheels, and implements. Each section includes multiple sub-pages providing part numbers, descriptions and other technical details for servicing and repairing components of the tractor.
John deere power tech e 3.0l diesel engines service repair technical manual (...ufjjsjekkeemme
The document provides instructions for removing and installing various components of PowerTech E 2.4L and 3.0L diesel engines, including the flywheel, flywheel ring gear, flywheel housing, balancer shafts, and main bearing caps. Safety cautions are provided regarding heating components and handling heavy parts. Special tools and torque specifications are listed for each procedure.
John deere power tech e 2.4l diesel engines service repair technical manual (...ufjjsjekkeemme
The document provides instructions for removing and installing various components of PowerTech E 2.4L and 3.0L diesel engines, including the flywheel, flywheel ring gear, flywheel housing, balancer shafts, and measuring main bearing cap clearances. The removal instructions list necessary special tools and safety precautions for each component. Installation sections specify torque specifications and use of thread locking compounds.
1. The document provides instructions for disassembling and reassembling the carrier roller of an excavator model EL240.
2. The disassembly instructions describe cleaning parts and removing components like seals, bolts, and bushings. The reassembly instructions describe installing components in reverse order and applying lubricants like engine oil and threadlock.
3. Maintenance standards are provided for wear limits, repair welding procedures, and storage of items for up to 12 months.
More Related Content
Similar to Case ih puma 150 tier 4 b (final) tractor service repair manual
Case ih puma 220 cvt tier 4 b (final) tractor service repair manualfjskkddmmmse
This document is a service manual for Puma tractors that provides specifications and repair instructions for various tractor systems. It includes sections on the engine, transmission, axles, hydraulics, pneumatics, steering, cab climate control, and electrical systems. Each section includes subsections on specific components that describe their function and repair procedures.
Case ih puma 185 tier 4 b (final) tractor service repair manualufjsjekjkeme
Remove the engine as follows:
1. Disconnect the battery ground cable.
2. Disconnect all wiring harnesses and electrical connectors from the engine.
3. Disconnect the fuel lines from the fuel injection pump and fuel filter. Plug the lines to prevent contamination.
4. Disconnect the hydraulic lines from the hydraulic pump. Plug the lines to prevent contamination.
5. Disconnect the cooling lines from the engine. Plug the lines to prevent contamination.
6. Disconnect the exhaust system from the engine.
7. Disconnect the clutch linkage from the clutch housing.
8. Remove the engine mounting bolts.
9. Attach lifting equipment to the engine lifting eyes and carefully lift the engine
Case ih puma 200 cvt tier 4 b (final) tractor service repair manualfjjsekekskmdm
This document is a service manual for Puma tractors that provides specifications and repair instructions for various tractor systems. It includes sections on the engine, transmission, axles, hydraulics, pneumatics, steering, cab climate control, and electrical systems. Each section includes subsections on specific components of those systems.
Case ih puma 220 cvt tier 4 b (final) tractor service repair manualfjjskewerkskem
Remove the engine as follows:
1. Disconnect the battery ground cable.
2. Disconnect all wiring harness connectors from the engine.
3. Disconnect the fuel lines from the fuel injection pump. Plug the lines to prevent contamination.
4. Disconnect the engine oil cooler lines. Plug the lines to prevent contamination.
5. Disconnect the engine coolant hoses. Plug the hoses to prevent contamination.
6. Disconnect the exhaust pipe from the turbocharger.
7. Disconnect the transmission control linkage from the engine.
8. Attach lifting equipment to the engine lifting eyes and remove the engine from the machine.
Case ih puma 220 cvt tier 4 b (final) tractor service repair manualufjjsjekdkemme
Remove the engine as follows:
1. Disconnect the battery ground cable.
2. Disconnect all wiring harness connectors from the engine.
3. Disconnect the fuel lines from the fuel injection pump. Plug the lines to prevent contamination.
4. Disconnect the hydraulic lines from the hydraulic pump. Plug the lines to prevent contamination.
5. Disconnect the cooling lines from the engine. Plug the lines to prevent contamination.
6. Disconnect the exhaust system from the engine.
7. Remove the engine mounting bolts.
8. Attach lifting equipment to the engine lifting eyes and remove the engine from the machine.
Case ih puma 200 tier 4 b (final) tractor service repair manualfjjsekekskmdm
This document is a service manual that provides maintenance and repair instructions for various components of PUMA tractors, including the engine, transmission, axles, brakes, hydraulics, electrical systems, and cab components. It includes removal and installation procedures, specifications, and troubleshooting information for technicians servicing these machines.
Case ih puma 220 tier 4 b (final) tractor service repair manualufujjdjkskemme
Remove the engine as follows:
1. Disconnect the battery ground cable.
2. Disconnect all wiring harness connectors from the engine.
3. Disconnect the fuel lines from the fuel injection pump. Plug the lines to prevent contamination.
4. Disconnect the hydraulic lines from the hydraulic pump. Plug the lines to prevent contamination.
5. Disconnect the cooling lines from the engine. Plug the lines to prevent contamination.
6. Disconnect the exhaust pipe from the exhaust manifold.
7. Remove the engine mounting bolts.
8. Attach lifting equipment to the engine lifting eyes and remove the engine from the machine.
Case ih puma 200 tier 4 b (final) tractor service repair manualfjkskefkmem
This document is a service manual for Puma tractors that provides specifications and repair instructions for various tractor systems. It includes sections on the engine, transmission, axles, hydraulics, pneumatics, steering, cab climate control, and electrical systems. Each section includes subsections on specific components that describe their function and repair procedures.
Case ih puma 185 tier 4 b (final) tractor service repair manualfjsekkdkmem
Remove the engine as follows:
1. Disconnect the battery ground cable.
2. Disconnect all wiring harnesses and electrical connectors from the engine.
3. Disconnect the fuel lines from the fuel injection pump and fuel filter. Plug the lines to prevent contamination.
4. Disconnect the hydraulic lines from the hydraulic pump. Plug the lines to prevent contamination.
5. Disconnect the cooling lines from the engine. Plug the lines to prevent contamination.
6. Disconnect the exhaust system from the engine.
7. Disconnect the clutch linkage from the clutch housing.
8. Remove the engine mounting bolts.
9. Attach lifting equipment to the engine lifting eyes and carefully lift the engine
Case ih puma 200 cvx tractor service repair manualfujskksemmk
This document is a service manual for Puma 170 CVX, Puma 185 CVX, Puma 200 CVX, Puma 215 CVX, and Puma 230 CVX tractors. It contains information on the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, pneumatic system, hitches and couplings, frames and ballasting, steering, wheels, cab climate control, and electrical systems. The manual provides part numbers and repair instructions for components of each system.
Similar to Case ih puma 150 tier 4 b (final) tractor service repair manual (10)
Massey Ferguson MF290 XTRA TRACTORS (INDIA) Parts Catalogue Manualufjjsjekkeemme
This is the Highly Detailed factory Parts manual for theMASSEY FERGUSON MF290 XTRA TRACTORS, this Parts Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.MASSEY FERGUSON MF290 XTRA TRACTORS Parts Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this Parts manual is an inexpensive way to keep your vehicle working properly.
Parts Manual Covers:
Engine and Equipment
Clutch
Transmission
Rear Axle
Linkage
PTO-Drive Mechanism
Front Axle
Hydraulics
Electric Equipment and Instrument
Electronic Equipment
Sheet Metal
And more...
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveMASSEY FERGUSON MF290 XTRA TRACTORS Parts Manual.
Thanks for visiting!
New holland tj325 tractor service repair manualufjjsjekkeemme
- This document contains safety warnings and instructions for servicing agricultural equipment.
- It instructs technicians to turn off the engine, set the parking brake, block the wheels, and remove keys before servicing to prevent injury.
- Warnings advise wearing proper protective equipment like hard hats and gloves, and operating controls only from the operator's seat.
Massey ferguson mf 363 lx tractor service parts catalogue manual (part number...ufjjsjekkeemme
This document contains parts listings and descriptions for the engine of a Massey Ferguson 363 LX tractor. It includes 6 pages detailing over 80 individual parts for the engine block, crankshaft, cylinder head, and other components. Each part is listed with its number, quantity, description, and other identifying information. The document provides extensive reference information for maintenance and repair of this tractor engine.
Massey ferguson mf 350 tractor service parts catalogue manual (part number 8...ufjjsjekkeemme
This document provides parts information for a Massey Ferguson 350 tractor engine. It includes 4 pages of documentation with diagrams and lists of parts, part numbers, quantities and descriptions for the engine block, cylinder head, crankshaft, pistons, connecting rods and other engine components. Over 100 individual parts are detailed across the 4 pages of documentation.
The document is a parts catalog for a Massey Ferguson 6711 tractor. It contains 24 pages of detailed parts listings for various systems of the tractor, including the engine, axles, steering, brakes, hydraulics, electrical, cab, chassis, and implements. Each page lists the relevant part numbers, quantities, descriptions, and any additional comments for a specific assembly or system. The parts catalog provides a comprehensive listing of components for the tractor broken down by section.
Massey ferguson 6140 tractor service parts catalogue manual (part number 163...ufjjsjekkeemme
This document provides parts information for the engine of a Massey Ferguson 6140 tractor with serial number 1637275. It includes 42 line items with part numbers, quantities, descriptions and other details for the engine block, cylinder head, crankshaft, pistons, connecting rods and other engine components. It also provides references to other documents for additional part information.
Massey ferguson 6120 tractor service parts catalogue manual (part number 163...ufjjsjekkeemme
This document provides parts information for the engine of a Massey Ferguson 6120 tractor with serial number 1637273. It includes:
1. A list of 32 parts for the engine and their descriptions.
2. A list of 28 parts for the cylinder block and their descriptions.
3. A list of 23 parts for the crankshaft, pistons, and connecting rods and their descriptions.
Massey ferguson 5613 tractor (dyna 6) (e023046 g307020) service parts catal...ufjjsjekkeemme
This document provides a table of contents and parts lists for a Massey Ferguson 5613 tractor. The table of contents lists 24 sections that provide information on various tractor systems and components. Subsequent pages provide detailed parts lists and descriptions for the engine, cylinder block, crankshaft, camshaft, cylinder head, and intake manifold. Over 100 individual parts are detailed across 7 pages of the document.
Massey ferguson 5612 tractor (dyna 6) (d295023 g165048) service parts catal...ufjjsjekkeemme
The document is a table of contents for the service manual of a Massey Ferguson 5612 tractor. It lists 24 sections that make up the manual, including the engine, axles, steering system, drive train, brakes, hydraulics, electrical system, cab, chassis, decals, wheels, and implements. Each section includes multiple sub-pages providing part numbers, descriptions and other technical details for servicing and repairing components of the tractor.
John deere power tech e 3.0l diesel engines service repair technical manual (...ufjjsjekkeemme
The document provides instructions for removing and installing various components of PowerTech E 2.4L and 3.0L diesel engines, including the flywheel, flywheel ring gear, flywheel housing, balancer shafts, and main bearing caps. Safety cautions are provided regarding heating components and handling heavy parts. Special tools and torque specifications are listed for each procedure.
John deere power tech e 2.4l diesel engines service repair technical manual (...ufjjsjekkeemme
The document provides instructions for removing and installing various components of PowerTech E 2.4L and 3.0L diesel engines, including the flywheel, flywheel ring gear, flywheel housing, balancer shafts, and measuring main bearing cap clearances. The removal instructions list necessary special tools and safety precautions for each component. Installation sections specify torque specifications and use of thread locking compounds.
1. The document provides instructions for disassembling and reassembling the carrier roller of an excavator model EL240.
2. The disassembly instructions describe cleaning parts and removing components like seals, bolts, and bushings. The reassembly instructions describe installing components in reverse order and applying lubricants like engine oil and threadlock.
3. Maintenance standards are provided for wear limits, repair welding procedures, and storage of items for up to 12 months.
1. The document provides instructions for disassembling and reassembling the carrier roller of an excavator model EL240.
2. The disassembly instructions describe cleaning parts and removing components like seals, bolts, and bushings. The reassembly instructions describe installing components in reverse order and applying lubricants like engine oil and threadlock.
3. Maintenance standards are provided for wear limits, repair welding procedures, and storage of items for up to 12 months.
Caterpillar cat d8 t track type tractor dozer bulldozer (prefix mb8) service ...ufjjsjekkeemme
This document provides instructions for removing and installing the final drive on a D8T track-type tractor. The removal procedure involves using lifting devices and tools to detach various components of the final drive including the planetary carrier, sprocket hub, and reaction hub. These components are then disassembled further by removing shafts, gears, seals, and bearings. The assembly procedure reverses these steps, noting to clean and lubricate parts, carefully install seals using specialty tools, and tighten fasteners to the specified torques.
Caterpillar cat d8 t track type tractor dozer bulldozer (prefix fct) service ...ufjjsjekkeemme
The document provides instructions for removing and installing the front cover on a Caterpillar D8T track-type tractor with a C15 engine. The removal procedure involves using a socket to remove bolts securing the front cover. For installation, the front cover is secured with bolts using Loctite after cleaning all parts. Proper torque is applied to the bolts to complete the installation.
Caterpillar cat 320 f l excavator (prefix nhd) service repair manual (nhd0000...ufjjsjekkeemme
This document provides instructions for disassembling and assembling the travel motor of a 320F L excavator. The disassembly procedure involves 27 steps to remove components such as the head, fittings, seals, piston guide, barrel assembly, and shaft. The assembly procedure describes 30 steps including installing seals, plates, springs, and reassembling components like the barrel assembly, piston guide and head in their original positions and orientations. Precise assembly is required to prevent damage to components like the cam plate.
Caterpillar cat 320 e l excavator (prefix wbk) service repair manual (wbk0000...ufjjsjekkeemme
This document provides instructions for removing and installing a flywheel housing on a Caterpillar C6.6 engine. It describes two procedures: one for a standard housing and one for a wet back-end housing. The standard procedure involves removing bolts to detach the housing from the cylinder block. Dowels and seals must also be inspected or installed. The wet back-end procedure is similar but notes that a seal may be omitted if used on a standard engine. Precise torques are specified for bolting the housing depending on bolt grade. Alignment of the housing must be checked after installation.
Caterpillar cat 320 e l excavator (prefix tnj) service repair manual (tnj0000...ufjjsjekkeemme
This document provides instructions for removing and installing inlet and exhaust valves on a Caterpillar 320E L excavator engine. The removal process involves using specialized tools to compress the valve springs and remove the keepers and springs. Installation is the reverse of removal, requiring cleaning, lubricating, and using tools to compress springs during reassembly. Proper torque values are specified for reinstalling components.
Caterpillar cat 320 c ln excavator (prefix dbg) service repair manual (dbg000...ufjjsjekkeemme
This document provides instructions for servicing components of Caterpillar 320C excavator engines, including removing and installing the crankshaft front seal, flywheel, and flywheel housing. The procedures describe using various tools to remove parts like the crankshaft seal and installing replacement parts while taking precautions to contain fluids and prevent contamination.
Caterpillar cat 320 c l excavator (prefix dbg) service repair manual (dbg0000...ufjjsjekkeemme
This document provides instructions for removing and installing a crankshaft pulley on excavator models 320C, 320C L, and 320C LN. It outlines the required tools and steps to remove the V-belts, nut, washer, and pulley using a combination puller. It also describes cleaning parts and installing a new pulley by reversing the removal steps. Proper torque is required for reinstallation.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
2. Link Product / Engine
Product Market Product Engine
PUMA® 150 CVT Asia Pacific F4DFE613N*B006
PUMA® 150 CVT Middle East Africa F4DFE613N*B006
PUMA® 150 CVT Australia New Zealand F4DFE613N*B006
PUMA® 165 CVT Asia Pacific F4DFE613M*B003
PUMA® 165 CVT Middle East Africa F4DFE613M*B003
PUMA® 165 CVT Australia New Zealand F4DFE613M*B003
PUMA® 175 CVT Middle East Africa F4DFE613K*B008
PUMA® 175 CVT Australia New Zealand F4DFE613K*B008
PUMA® 175 CVT Asia Pacific F4DFE613K*B008
PUMA® 150 Middle East Africa F4DFE613N*B006
PUMA® 150 Australia New Zealand F4DFE613N*B006
PUMA® 150 Asia Pacific F4DFE613N*B006
PUMA® 165 Middle East Africa F4DFE613M*B003
PUMA® 165 Australia New Zealand F4DFE613M*B003
PUMA® 165 Asia Pacific F4DFE613M*B003
47936460 17/11/2015
9. INTRODUCTION
Foreword - Important notice regarding equipment servicing
All repair and maintenance work listed in this manual must be carried out only by qualified dealership personnel,
strictly complying with the instructions given, and using, whenever possible, the special tools.
Anyone who performs repair and maintenance operations without complying with the procedures provided herein
shall be responsible for any subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional, or
local dealers, reject any responsibility for damages caused by parts and/or components not approved by the manu-
facturer, including those used for the servicing or repair of the product manufactured or marketed by the manufacturer.
In any case, no warranty is given or attributed on the product manufactured or marketed by the manufacturer in case
of damages caused by parts and/or components not approved by the manufacturer.
The manufacturer reserves the right to make improvements in design and changes in specifications at any time without
notice and without incurring any obligation to install them on units previously sold. Specifications, descriptions, and
illustrative material herein are as accurate as known at time of publication but are subject to change without notice.
In case of questions, refer to your CASE IH Sales and Service Networks.
47936460 17/11/2015
3
10. INTRODUCTION
Foreword - How to use and navigate through this manual
This manual has been produced by a new technical information system. This new system is designed to deliver
technical information electronically through web delivery (eTIM), DVD, and paper manuals. A coding system called
SAP has been developed to link the technical information to other Product Support functions, e.g., Warranty.
Technical information is written to support the maintenance and service of the functions or systems on a customer's
machine. When a customer has a concern on their machine it is usually because a function or system on their ma-
chine is not working at all, is not working efficiently, or is not responding correctly to their commands. When you refer
to the technical information in this manual to resolve that customer's concern, you will find all the information classified
using the SAP coding, according to the functions or systems on that machine. Once you have located the technical
information for that function or system, you will then find all the mechanical, electrical or hydraulic devices, compo-
nents, assemblies, and sub assemblies for that function or system. You will also find all the types of information that
have been written for that function or system: the technical data (specifications), the functional data (how it works),
the diagnostic data (fault codes and troubleshooting), and the service data (remove, install adjust, etc.).
By integrating SAP coding into technical information, you will be able to search and retrieve just the right piece of
technical information you need to resolve that customer's concern on his machine. This is made possible by attaching
3 categories to each piece of technical information during the authoring process.
The first category is the Location, the second category is the Information Type and the third category is the Product:
• LOCATION - the component or function on the machine, that the piece of technical information is going to describe
(e.g., Fuel tank).
• INFORMATION TYPE - the piece of technical information that has been written for a particular component or func-
tion on the machine (e.g., Capacity would be a type of Technical Data describing the amount of fuel held by the fuel
tank).
• PRODUCT - the model for which the piece of technical information is written.
Every piece of technical information will have those three categories attached to it. You will be able to use any combi-
nation of those categories to find the right piece of technical information you need to resolve that customer's concern
on their machine.
That information could be:
• the procedure for how to remove the cylinder head
• a table of specifications for a hydraulic pump
• a fault code
• a troubleshooting table
• a special tool
47936460 17/11/2015
4
12. Engine - Engine and crankcase
Engine - Disconnect
Prior operation:
Discharge the Air conditioning system, for further information refer to Air conditioning - Discharging (50.200)
Prior operation:
Drain the engine cooling system, for further information refer to Engine cooling system - Drain fluid (10.400)
Prior operation:
Remove the Selective Catalytic Reduction (SCR) muffler, for further information refer to Selective Catalytic Reduc-
tion (SCR) muffler and catalyst - Remove (10.500)
Prior operation:
Remove the left-hand fuel tank, for further information refer to Fuel tank - Remove (10.216)
Prior operation:
Disconnect the battery, for further information refer to Battery - Disconnect (55.302)
WARNING
Heavy objects!
Lift and handle all heavy components using lift-
ing equipment with adequate capacity. Always
support units or parts with suitable slings or
hooks. Make sure the work area is clear of all
bystanders.
Failure to comply could result in death or seri-
ous injury.
W0398A
WARNING
Avoid injury!
Handle all parts carefully. Do not place your
hands or fingers between parts. Use Personal
Protective Equipment (PPE) as indicated in this
manual, including protective goggles, gloves,
and safety footwear.
Failure to comply could result in death or seri-
ous injury.
W0208A
1. WARNING
Crushing hazard!
The wheels on this vehicle are very heavy. Al-
ways use a wheel remover or chain hoists to re-
move and install the wheels. Use an assistant
as required.
Failure to comply could result in death or seri-
ous injury.
W0149A
Install the left-hand rear wheel.
BAIL10CVT461AVA 1
47936460 17/11/2015
10.1 [10.001] / 3
13. Engine - Engine and crankcase
2. A. Remove the transmission housing drain plug and
drain the transmission oil into a suitable container.
B. Install the drain plug and torque to 68 - 82 N·m (50
- 60 lb ft)
BAIL07APH288AVA 2
Vehicles with front hitch
3. Remove the front weights.
4. Disconnect the front hitch hydraulic pipes from the mid-
mount valve.
BAIL13TR01645AB 3
5. Disconnect the front hitch hydraulic pipes.
BAIL13TR01646AB 4
6. Remove the front hitch hydraulic pipes.
BAIL13TR01647AB 5
47936460 17/11/2015
10.1 [10.001] / 4
14. Engine - Engine and crankcase
7. Disconnect the radar electrical connector and remove
the radar (if fitted).
BAIL13TR01648AB 6
8. WARNING
Heavy object!
ALWAYS use a hoist or get assistance to lift the
component.
Failure to comply could result in death or seri-
ous injury.
W0086A
Remove the right-hand side rail.
NOTE: Repeat this step for the left-hand side.
BAIL13TR01649AB 7
All vehicles
9. 1. Disconnect the front Power Take-Off (PTO) pipes.
2. Detach the PTO pipe bracket.
BAIL13TR01655AB 8
10. Disconnect the oil cooler supply and return pipes.
BAIL13TR01656AB 9
47936460 17/11/2015
10.1 [10.001] / 5
15. Engine - Engine and crankcase
11. Detach the cab heater supply pipe.
BAIL13TR01657AB 10
12. Remove the starter motor shield.
BAIL13TR01658AB 11
13. Disconnect the starter motor positive cables.
BAIL13TR01659AB 12
14. Disconnect the starter motor electrical connector.
BAIL13TR01660AB 13
47936460 17/11/2015
10.1 [10.001] / 6
16. Engine - Engine and crankcase
15. Disconnect the starter motor negative terminal.
BAIL13TR01661AB 14
16. Disconnect the block heater electrical connector (if fit-
ted).
BAIL13TR01662AB 15
17. Detach the fuse box and position to one side.
BAIL13TR01663AB 16
18. Detach the oil cooler pipe bracket.
BAIL13TR01664AB 17
47936460 17/11/2015
10.1 [10.001] / 7
17. Engine - Engine and crankcase
19. Disconnect the alternator electrical connectors.
BAIL13TR01665AB 18
20. Detach the brake fluid reservoir and position it to one
side.
BAIL13TR01666AB 19
21. Disconnect the dosing module.
A. Disconnect the electrical connector (1).
B. Disconnect the urea lines (2).
BAIL13TR01667AB 20
22. 1. Disconnect the earth connector.
2. Cut the cable tie.
BAIL13TR01668AB 21
47936460 17/11/2015
10.1 [10.001] / 8
18. Engine - Engine and crankcase
23. 1. Disconnect the steering hoses.
2. Disconnect the earth connector.
NOTE: Mark the hoses to aid installation.
BAIL13TR01669AB 22
24. Disconnect the water-in-fuel electrical connector.
BAIL13TR01670AB 23
25. 1. Disconnect the flywheel speed sensor electrical
connector.
2. Disconnect the Selective Catalytic Reduction
(SCR) Diesel Oxidation Catalyst (DOC) electrical
connector.
BAIL13TR01671AB 24
26. Disconnect the vehicle lighting wiring harness.
BAIL13TR01672AB 25
47936460 17/11/2015
10.1 [10.001] / 9
19. Engine - Engine and crankcase
27. 1. Disconnect the grid heater relay electrical connec-
tor.
2. Detach the grid heater relay.
BAIL13TR01673AB 26
28. 1. Detach the Air Conditioning (A/C) pipe retaining
bracket.
2. Remove the engine frame bracket.
BAIL13TR01674AB 27
29. Disconnect the front brake pipe.
BAIL13TR01675AB 28
30. Disconnect the front brake pipe.
BAIL13TR01676AB 29
47936460 17/11/2015
10.1 [10.001] / 10
20. Engine - Engine and crankcase
31. Remove the left-hand air intake pipe.
BAIL13TR01677AB 30
32. Disconnect the A/C pipes.
NOTE: Seal all openings using clean blanking caps.
BAIL13TR01678AB 31
33. Remove the A/C pipe retaining clamp.
BAIL13TR01679AB 32
34. 1. Disconnect the cab heater hose.
2. Disconnect the main harness electrical connector.
BAIL13TR01680AB 33
47936460 17/11/2015
10.1 [10.001] / 11
21. Engine - Engine and crankcase
35. A. Disconnect the NOx amplifier electrical connector
(1).
B. Disconnect the fan electrical connector (2).
BAIL13TR01681AB 34
36. 1. Disconnect the A/C compressor electrical con-
nector.
2. Disconnect the A/C pressure switch electrical
connector.
3. Disconnect the front hitch electrical connector.
4. Cut the cable ties.
BAIL13TR01682AB 35
37. Disconnect the front axle electrical connectors.
BAIL13TR01683AB 36
38. Detach the wiring harness from the radiator fan
shroud.
BAIL13TR01684AB 37
47936460 17/11/2015
10.1 [10.001] / 12
22. Engine - Engine and crankcase
39. Disconnect the air intake electrical connectors.
BAIL13TR01685AB 38
40. 1. Disconnect the differential lock supply pipe.
2. Disconnect trailer brake air supply pipe.
3. Remove the differential lock supply pipe retaining
bracket.
BAIL13TR01686AB 39
41. 1. Remove the differential lock supply pipe.
2. Remove the front suspension supply hose clamp.
BAIL13TR01687AB 40
42. Disconnect the front suspension hoses.
BAIL13TR01688AB 41
47936460 17/11/2015
10.1 [10.001] / 13
23. Engine - Engine and crankcase
43. Detach the front hitch external control switch.
BAIL13TR01689AB 42
44. Using the tractor splitting stand 380003352, Install
the larger wheeled part of the tractor splitting stand
380003352 under the front weight carrier and support
the weight of the tractor with splitting stand.
BAIL13TR01690AB 43
45. Using a suitable trolley jack, raise the front of the trac-
tor.
BAIL13TR01691AB 44
46. WARNING
Crushing hazard!
The wheels on this vehicle are very heavy. Al-
ways use a wheel remover or chain hoists to
remove and install the wheels. Use an assis-
tant as required.
Failure to comply could result in death or seri-
ous injury.
W0149A
Remove the front wheels.
BAIL13TR01692AB 45
47936460 17/11/2015
10.1 [10.001] / 14
24. Engine - Engine and crankcase
47. Lower the front of the tractor back onto the splitting
stand.
BAIL13TR01691AB 46
Vehicles with standard front axle
48. Remove the front wheel drive shaft guard and drive
shaft.
NOTE: The type of drive shaft fitted is dependant on type
of front axle installed.
BSD1959A 47
49. Remove the drive shaft flange (where fitted).
BSD1917A 48
47936460 17/11/2015
10.1 [10.001] / 15
25. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
26. Engine - Engine and crankcase
Vehicles with suspended front axle
50. Remove the front wheel drive shaft guard.
BAIL13TR01694AB 49
51. A. Remove the circlip (1).
B. Slide the front wheel drive shaft sleeve (2).
BAIL13TR01695AB 50
52. 1. Using a suitable trolley jack support the front axle
suspension arm.
2. Remove the front axle suspension arm retaining
bolts.
3. Lower the suspension arm and remove the trolley
jack.
BAIL13TR01693AB 51
53. Install the tractor splitting stand 380003352 alignment
bar to the front part of the splitting kit.
BAIL13TR01696AB 52
47936460 17/11/2015
10.1 [10.001] / 16
27. Engine - Engine and crankcase
54. 1. Install the smaller wheeled part of the tractor split-
ting stand 380003352 under the engine.
2. Tighten the alignment bar bolt.
BAIL13TR01697AB 53
55. Remove the engine to transmission lower retaining
bolts.
BAIL13TR01698AB 54
56. 1. Position the static part of the tractor splitting stand
380003352 under the transmission and secure to
the transmission.
BAIL13TR01699AB 55
57. Remove the engine to transmission upper retaining
bolts.
BAIL13TR00798AB 56
47936460 17/11/2015
10.1 [10.001] / 17
28. Engine - Engine and crankcase
58. Remove the left-hand side engine to transmission re-
taining bolts.
BAIL13TR00796AB 57
59. Remove the right-hand side engine to transmission
retaining bolts.
BAIL13TR00797AC 58
60. Roll the front axle and engine assembly away from the
transmission.
BAIL13TR00930AC 59
47936460 17/11/2015
10.1 [10.001] / 18