Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
9. INTRODUCTION
Foreword - How to use and navigate through this manual
This manual has been produced by a new technical information system. This new system is designed to deliver
technical information electronically through web delivery (eTIM), DVD, and paper manuals. A coding system called
SAP has been developed to link the technical information to other Product Support functions, e.g., Warranty.
Technical information is written to support the maintenance and service of the functions or systems on a customer's
machine. When a customer has a concern on their machine it is usually because a function or system on their ma-
chine is not working at all, is not working efficiently, or is not responding correctly to their commands. When you refer
to the technical information in this manual to resolve that customer's concern, you will find all the information classified
using the SAP coding, according to the functions or systems on that machine. Once you have located the technical
information for that function or system, you will then find all the mechanical, electrical or hydraulic devices, compo-
nents, assemblies, and sub assemblies for that function or system. You will also find all the types of information that
have been written for that function or system: the technical data (specifications), the functional data (how it works),
the diagnostic data (fault codes and troubleshooting), and the service data (remove, install adjust, etc.).
By integrating SAP coding into technical information, you will be able to search and retrieve just the right piece of
technical information you need to resolve that customer's concern on his machine. This is made possible by attaching
3 categories to each piece of technical information during the authoring process.
The first category is the Location, the second category is the Information Type and the third category is the Product:
• LOCATION - the component or function on the machine, that the piece of technical information is going to describe
(e.g., Fuel tank).
• INFORMATION TYPE - the piece of technical information that has been written for a particular component or func-
tion on the machine (e.g., Capacity would be a type of Technical Data describing the amount of fuel held by the fuel
tank).
• PRODUCT - the model for which the piece of technical information is written.
Every piece of technical information will have those three categories attached to it. You will be able to use any combi-
nation of those categories to find the right piece of technical information you need to resolve that customer's concern
on their machine.
That information could be:
• the procedure for how to remove the cylinder head
• a table of specifications for a hydraulic pump
• a fault code
• a troubleshooting table
• a special tool
48193151 30/11/2017
3
10. INTRODUCTION
Manual content
This manual is divided into Sections. Each Section is then divided into Chapters. Contents pages are included at the
beginning of the manual, then inside every Section and inside every Chapter. An alphabetical Index is included at
the end of each Chapter. Page number references are included for every piece of technical information listed in the
Chapter Contents or Chapter Index.
Each Chapter is divided into four Information types:
• Technical Data (specifications) for all the mechanical, electrical or hydraulic devices, components, assemblies or
sub-assemblies.
• Functional Data (how it works) for all the mechanical, electrical or hydraulic devices, components, assemblies or
sub-assemblies.
• Diagnostic Data (fault codes, electrical and hydraulic troubleshooting) for all the mechanical, electrical or hydraulic
devices, components, assemblies or sub-assemblies.
• Service Data (remove disassemble, assemble, install) for all the mechanical, electrical or hydraulic devices, com-
ponents, assemblies or sub-assemblies.
Sections
Sections are grouped according to the main functions or a systems on the machine. Each Section is identified by a
number (00, 35, 55, etc.). The Sections included in the manual will depend on the type and function of the machine that
the manual is written for. Each Section has a Contents page listed in alphabetic/numeric order. This table illustrates
which Sections could be included in a manual for a particular product.
PRODUCT
Tractors
Vehicles with working arms: backhoes, excavators,
skid steers, ….
Combines, forage harvesters, balers, ….
Seeding, planting, floating, spraying
equipment, ….
SECTION Mounted equipment and tools, ….
00 - Maintenance X X X X X
05 - Machine completion and equipment X X X X X
10 - Engine X X X X
14 - Main gearbox and drive X X X X
18 - Clutch X X X
21 - Transmission X X X X
23 - Four wheel drive (4WD) system X X X X
25 - Front axle system X X X X
27 - Rear axle system X X X X
29 - Hydrostatic drive X X X X
31 - Power Take-Off (PTO) X X
33 - Brakes and controls X X X X
35 - Hydraulic systems X X X X
36 - Pneumatic system X X X X
37 - Hitches, drawbars and implement couplings X X X
39 - Frames and ballasting X X X X X
41 - Steering X X X X
44 - Wheels X X X X
46 - Steering clutches
48 - Tracks and track suspension X X X
50 - Cab climate control X X X X
55 - Electrical systems X X X X X
56 - Grape harvester shaking
58 - Attachments/headers X
60 - Product feeding X
48193151 30/11/2017
4
11. INTRODUCTION
61 - Metering system X
62 - Pressing - Bale formation X
63 - Chemical applicators X
64 - Chopping X
66 - Threshing X
68 - Tying/Wrapping/Twisting X
69 - Bale wagons
70 - Ejection X
71 - Lubrication system X X X X X
72 - Separation X
73 - Residue handling X
74 - Cleaning X
75 - Soil preparation/Finishing
76 - Secondary cleaning / Destemmer
77 - Seeding X
78 - Spraying X
79 - Planting X
80 - Crop storage / Unloading X
82 - Front loader and bucket X X
83 - Telescopic single arm X X
84 - Booms, dippers and buckets X X
86 - Dozer blade and arm X X
88 - Accessories X X X X X
89 - Tools X X X X X
90 - Platform, cab, bodywork and decals X X X X
48193151 30/11/2017
5
13. Engine - Engine and crankcase
Engine - Remove
Prior operation:
Separate the front axle and front frame from the engine, see Front frame - Remove (39.100).
Prior operation:
Remove the left-hand fuel tank, see Fuel tank - Remove (10.216).
Prior operation:
Remove the selective catalytic reduction (SRC) muffler, see Selective Catalytic Reduction (SCR) muffler and cat-
alyst - Remove (10.500).
Prior operation:
Remove the engine hood, see Hood - Remove (90.100).
WARNING
Heavy objects!
Lift and handle all heavy components using lift-
ing equipment with adequate capacity. Always
support units or parts with suitable slings or
hooks. Make sure the work area is clear of all
bystanders.
Failure to comply could result in death or seri-
ous injury.
W0398A
WARNING
Avoid injury!
Handle all parts carefully. Do not place your
hands or fingers between parts. Use Personal
Protective Equipment (PPE) as indicated in this
manual, including protective goggles, gloves,
and safety footwear.
Failure to comply could result in death or seri-
ous injury.
W0208A
1. Remove the starter motor shield.
BAIL15TR00891AA 1
48193151 30/11/2017
10.1 [10.001] / 3
14. Engine - Engine and crankcase
2. Remove the positive cable cover.
BAIL15TR00892AA 2
3. Disconnect the positive connectors.
BAIL15TR00877AA 3
4. Disconnect the ground connectors.
BAIL15TR00893AA 4
5. • Disconnect the grid heater relay electrical connector
(1).
• Cut the cable ties (2).
BAIL15TR00878AA 5
48193151 30/11/2017
10.1 [10.001] / 4
15. Engine - Engine and crankcase
6. • Detach the wiring harness retaining bracket (1).
• Detach the fuse box (2).
BAIL15TR00879AA 6
7. Disconnect the alternator positive cable.
BAIL15TR00880AA 7
8. • Disconnect the compressor coolant hose (1).
• Detach the oil cooler pipe retaining bracket (2).
• Disconnect the oil cooler pipe (3).
BAIL15TR00881AA 8
9. 1. Disconnect the coolant pipe connectors (1).
2. Detach the coolant pipe retaining brackets (2).
BAIL15TR00882AA 9
48193151 30/11/2017
10.1 [10.001] / 5
16. Engine - Engine and crankcase
10. Disconnect the coolant hose from the rear of the cylin-
der head.
BAIL15TR00883AA 10
11. Disconnect the alternator electrical connector.
BAIL15TR00884AA 11
12. Disconnect the air intake sensor electrical connector.
BAIL15TR00885AA 12
13. Remove the left-hand oil cooler pipe:
A. Disconnect the hydraulic pipe (1).
B. Detach the hydraulic pipe retaining bracket (2).
BAIL15TR00886AA 13
48193151 30/11/2017
10.1 [10.001] / 6
17. Engine - Engine and crankcase
14. Remove the air compressor outlet pipe:
A. Disconnect the air compressor banjo connector
(1).
B. Disconnect the in-line connector (2).
C. Detach the pipe retaining bracket (3).
BAIL15TR00887AA 14
15. 1. Disconnect the ground connections (1).
2. Disconnect the steering motor hoses (2).
3. Detach the steering pipe retaining bracket (3).
BAIL15TR00888AA 15
16. Disconnect the water in fuel sensor electrical connec-
tor.
BAIL15TR00889AA 16
17. Disconnect the fuel line from the water trap.
BAIL15TR00890AA 17
48193151 30/11/2017
10.1 [10.001] / 7
18. Engine - Engine and crankcase
18. 1. Disconnect the grid heater relay electrical con-
nectors (1).
2. Detach the grid heater relay bracket (2).
BAIL15TR00898AA 18
19. Remove the fuel lines:
• Disconnect the in-line connectors (1).
• Detach the fuel lines form the clips (2).
• Cut the cable tie (3).
BAIL15TR00899AA 19
20. Disconnect the flywheel speed sensor electrical con-
nector.
BAIL15TR00900AA 20
21. Disconnect the engine wiring harness in-line electrical
connector.
BAIL15TR00896AA 21
48193151 30/11/2017
10.1 [10.001] / 8
19. Engine - Engine and crankcase
22. 1. Disconnect the A/C compressor return pipe (1).
2. Disconnect the A/C high pressure pipe in-line con-
nector (2).
3. Detach the A/C pipe retaining bracket (3).
BAIL15TR00897AA 22
23. 1. Cut the cable tie (1).
2. Disconnect the A/C compressor clutch electrical
connector (2).
BAIL15TR01177AA 23
24. Disconnect the viscous fan electrical connector.
BAIL15TR01178AA 24
25. Disconnect the coolant expansion tank electrical con-
nectors.
BAIL15TR00894AA 25
48193151 30/11/2017
10.1 [10.001] / 9
20. Engine - Engine and crankcase
26. Disconnect the NOx sensor module electrical connec-
tor.
BAIL15TR00895AA 26
27. 1. Disconnect the DIESEL EXHAUST FLUID (DEF)/
ADBLUE® dosing module lines (1).
NOTE: Seal all openings with clean blanking
plugs.
2. Disconnect the DEF/ADBLUE® dosing module
electrical connector (2).
NOTICE: Avoid DEF/ADBLUE® contamination of the elec-
trical connector by disconnecting the DEF/ADBLUE® con-
nectors first.
BAIL15TR01273AA 27
28. • Detach the wiring harness (1).
• Cut the cable tie (2).
• Disconnect the in-line electrical connector (3).
BAIL15TR00904AA 28
29. Disconnect the Diesel Oxidation Catalyst (DOC) tem-
perature sensor electrical connector.
BAIL15TR00905AA 29
48193151 30/11/2017
10.1 [10.001] / 10
21. Engine - Engine and crankcase
30. Detach the reservoir mounting bracket.
BAIL15TR00965AA 30
31. • Disconnect the coolant expansion tank hoses (1).
• Disconnect the air filter outlet pipe (2).
BAIL15TR00966AA 31
32. Detach the NOx module.
BAIL15TR00969AA 32
33. Remove the air filter frame retaining nuts.
BAIL15TR00967AA 33
48193151 30/11/2017
10.1 [10.001] / 11
22. Engine - Engine and crankcase
34. Using suitable lifting equipment, remove the air filter
and frame.
BAIL15TR00968AA 34
35. • Disconnect the air compressor banjo connector (1).
• Disconnect the air compressor coolant hose (2).
BAIL15TR00970AA 35
36. Disconnect the engine breather outlet hose.
BAIL15TR00972AA 36
37. Remove the air intake pipe.
BAIL15TR00971AA 37
48193151 30/11/2017
10.1 [10.001] / 12
23. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
24. Engine - Engine and crankcase
38. Disconnect the turbo outlet pipe.
BAIL15TR00973AA 38
39. Remove the engine upper frame rear retaining nuts.
BAIL15TR00974AA 39
40. Remove the engine upper frame front retaining nuts.
BAIL15TR00975AA 40
41. WARNING
Avoid injury!
The component is heavy. Removal/installation
requires two persons or a lifting device.
Failure to comply could result in death or seri-
ous injury.
W1141A
Using suitable lifting equipment, remove the engine
upper frame and DOC.
BAIL15TR00976AA 41
48193151 30/11/2017
10.1 [10.001] / 13
25. Engine - Engine and crankcase
42. Remove the front frame:
A. Detach the viscous fan wiring harness (1).
B. Remove the front frame retaining bolts (2).
BAIL15TR00977AA 42
43. Remove the rear frame cover plate.
BAIL15TR00978AA 43
44. Detach the coolant hoses.
BAIL15TR00980AA 44
45. Remove the rear frame retaining bolts.
BAIL15TR00979AA 45
48193151 30/11/2017
10.1 [10.001] / 14
26. Engine - Engine and crankcase
46. WARNING
Avoid injury!
The component is heavy. Removal/installation
requires two persons or a lifting device.
Failure to comply could result in death or seri-
ous injury.
W1141A
Using suitable lifting equipment, remove the rear
frame.
NOTE: Pass the A/C pipes through the frame when remov-
ing.
BAIL15TR00981AA 46
47. Detach the wiring harness.
BAIL15TR00983AA 47
48. Disconnect the engine breather.
BAIL15TR00982AA 48
49. Install engine lifting eyes 380200013.
BAIL15TR00984AA 49
48193151 30/11/2017
10.1 [10.001] / 15