This document provides a service manual for MAXXUM tractors. It includes sections on the engine, clutch, transmission, four-wheel drive system, front and rear axles, power take-off, brakes, hydraulic systems, hitches and drawbars, frames and ballasting, steering, wheels, cab climate control, and electrical systems. The document provides detailed instructions and specifications for servicing and repairing components of these systems.
Case ih patriot 4430 sprayer service repair manualudfujjsejkkem
The document provides technical specifications and information about the primary hydraulic power system for a Patriot 4430 sprayer, including torque specifications and general hydraulic system pressure specifications. It also contains sections related to the electrical power system, lighting system, and fault codes for the sprayer.
Case ih maxxum 120 ep europe f4 dfe413da service repair manualudfujjsejkkem
This document provides a service manual for MAXXUM tractors. It contains sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes, hydraulic systems, hitches and couplings, frames and ballasting, steering, wheels, cab climate control, and electrical systems. Each section includes subsections for specific components that provide removal and installation instructions, specifications, troubleshooting information, and other service details.
Case ih lb434 square baler service repair manual (4137 and up)udfujjsejkkem
This document is a service manual for square balers. It contains sections covering the power take-off drive shaft, gearbox, clutches, hydraulic and pneumatic brakes, hydraulic systems for bale density control, knife positioning, bale ejection, and auto-steer lock. Additional sections cover the electrical system, product feeding components, pressing and bale formation, tying/wrapping/twisting systems, ejection, lubrication, and the machine body, cab, and decals. Safety information is provided throughout regarding personal protective equipment, machine hazards, hydraulic systems, and general repair procedures.
Case ih farmall 85 n tractor service repair manualudfujjsejkkem
This document provides a service manual for Farmall tractors models 75N, 85N, 95N and 105N. It includes sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axles, power take-off, brakes, hydraulic systems, hitches and couplings, steering, wheels, cab climate control and electrical systems. Safety information is also provided at the beginning to prevent accidents during service.
Case ih farmall 85 c efficient power tractor service repair manual (pin zdjv1...udfujjsejkkem
This document is a service manual for Farmall tractors models 75C, 85C, 95C, 105C and 115C. It contains information on the engine, clutch, transmission, 4WD system, front axle system and other components. The manual provides repair and maintenance instructions for technicians broken down by system and part number. It also includes a table linking specific tractor models and configurations to the appropriate engine part number.
Case ih cvx 150 tractor service repair manualudfujjsejkkem
This service manual provides information for servicing the following models: CVX 140, CVX 150, CVX 160, CVX 175, CVX 195 tractor. The manual covers maintenance and repair procedures for the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes, hydraulic systems, steering, cab climate control, and electrical systems. Sections include removal and installation instructions, specifications, and troubleshooting information.
Case ih 3162 flex draper header (35 ft) service repair manual [yhh051300 ]udfujjsejkkem
This document is a service manual for Case IH 3152 and 3162 draper headers. It provides part numbers, specifications, safety information, maintenance instructions, and diagrams for the headers. The manual covers various models of both rigid and flex draper headers in different widths and includes topics like hydraulic systems, wheels, electrical systems, attachments/headers, and safety signs.
Case dv207 vibratory roller service repair manualudfujjsejkkem
This document is a service manual for a DV207 Vibratory Roller. It contains 20 sections covering maintenance, specifications, and repair instructions for the machine's engine, hydraulic system, frames, steering, axles, cab climate control, and electrical systems. The manual provides detailed instructions and diagrams for removing and repairing components. Safety precautions are outlined for general maintenance, repairs, and operation of the machine. Fluid specifications and technical data for the DV207 are also included.
Case ih patriot 4430 sprayer service repair manualudfujjsejkkem
The document provides technical specifications and information about the primary hydraulic power system for a Patriot 4430 sprayer, including torque specifications and general hydraulic system pressure specifications. It also contains sections related to the electrical power system, lighting system, and fault codes for the sprayer.
Case ih maxxum 120 ep europe f4 dfe413da service repair manualudfujjsejkkem
This document provides a service manual for MAXXUM tractors. It contains sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes, hydraulic systems, hitches and couplings, frames and ballasting, steering, wheels, cab climate control, and electrical systems. Each section includes subsections for specific components that provide removal and installation instructions, specifications, troubleshooting information, and other service details.
Case ih lb434 square baler service repair manual (4137 and up)udfujjsejkkem
This document is a service manual for square balers. It contains sections covering the power take-off drive shaft, gearbox, clutches, hydraulic and pneumatic brakes, hydraulic systems for bale density control, knife positioning, bale ejection, and auto-steer lock. Additional sections cover the electrical system, product feeding components, pressing and bale formation, tying/wrapping/twisting systems, ejection, lubrication, and the machine body, cab, and decals. Safety information is provided throughout regarding personal protective equipment, machine hazards, hydraulic systems, and general repair procedures.
Case ih farmall 85 n tractor service repair manualudfujjsejkkem
This document provides a service manual for Farmall tractors models 75N, 85N, 95N and 105N. It includes sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axles, power take-off, brakes, hydraulic systems, hitches and couplings, steering, wheels, cab climate control and electrical systems. Safety information is also provided at the beginning to prevent accidents during service.
Case ih farmall 85 c efficient power tractor service repair manual (pin zdjv1...udfujjsejkkem
This document is a service manual for Farmall tractors models 75C, 85C, 95C, 105C and 115C. It contains information on the engine, clutch, transmission, 4WD system, front axle system and other components. The manual provides repair and maintenance instructions for technicians broken down by system and part number. It also includes a table linking specific tractor models and configurations to the appropriate engine part number.
Case ih cvx 150 tractor service repair manualudfujjsejkkem
This service manual provides information for servicing the following models: CVX 140, CVX 150, CVX 160, CVX 175, CVX 195 tractor. The manual covers maintenance and repair procedures for the engine, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes, hydraulic systems, steering, cab climate control, and electrical systems. Sections include removal and installation instructions, specifications, and troubleshooting information.
Case ih 3162 flex draper header (35 ft) service repair manual [yhh051300 ]udfujjsejkkem
This document is a service manual for Case IH 3152 and 3162 draper headers. It provides part numbers, specifications, safety information, maintenance instructions, and diagrams for the headers. The manual covers various models of both rigid and flex draper headers in different widths and includes topics like hydraulic systems, wheels, electrical systems, attachments/headers, and safety signs.
Case dv207 vibratory roller service repair manualudfujjsejkkem
This document is a service manual for a DV207 Vibratory Roller. It contains 20 sections covering maintenance, specifications, and repair instructions for the machine's engine, hydraulic system, frames, steering, axles, cab climate control, and electrical systems. The manual provides detailed instructions and diagrams for removing and repairing components. Safety precautions are outlined for general maintenance, repairs, and operation of the machine. Fluid specifications and technical data for the DV207 are also included.
New holland tv145 tractor service repair manualudfujjsejkkem
This document provides a table of contents for a repair manual for a TV145 tractor. The table of contents lists numerous sections, numbered 00 through 88, that cover various systems of the tractor like the engine, transmission, axles, brakes, hydraulics and more. Each section contains multiple chapters that go into further detail. The document also provides general safety and operational considerations for working on the tractor.
New holland tj275 tractor service repair manualudfujjsejkkem
- This document provides safety information and warnings for operating machinery.
- Operators should read the entire manual and all safety signs on the machine before operating.
- When servicing a machine, always turn off the engine, set the parking brake, remove the key and block the wheels before working on it.
- Wear proper safety equipment like a hard hat, safety shoes, gloves, and eye protection when operating machinery. Loose clothing can get caught in moving parts.
Massey ferguson mf 377 tractor service parts catalogue manual (part number 3...udfujjsejkkem
This document provides part numbers and descriptions for components of a Massey Ferguson 377 tractor engine. It includes assemblies and parts for the engine block, cylinder head, crankshaft, pistons, connecting rods, and rocker shaft. The document lists each part number, quantity, description, and any relevant comments to aid in servicing or replacing the parts. It contains detailed exploded diagrams and part lists for the major engine assemblies.
Massey ferguson mf 355 tractor service parts catalogue manual (part number 8...udfujjsejkkem
This document provides part numbers and descriptions for components of a Massey Ferguson 355 tractor with serial number 819749. It includes sections on the engine installation, cylinder block, crankshaft and pistons, and cylinder head. The document lists part numbers, quantities, descriptions and additional comments for over 50 individual components.
Massey ferguson mf 333 tractor service parts catalogue manual (part number 3...udfujjsejkkem
This document contains parts lists and technical specifications for components of a Massey Ferguson 333 tractor engine. It includes lists of parts for the engine cylinder block, crankshaft, pistons, connecting rods, cylinder head, and rocker shaft. Each item is accompanied by details like part numbers, quantities, and any relevant comments. The lists contain over 75 individual part items in total.
Massey ferguson mf 298 tractor (gb) service parts catalogue manual (part numb...udfujjsejkkem
This document provides a parts list for engine installation on a Massey Ferguson 298 tractor. It contains 30 numbered items describing engine parts like the engine, bolts, spacers, and other components. Each item lists the part number, quantity, description, and any comments.
Massey ferguson mf 298 tractor (fr) service parts catalogue manual (part numb...udfujjsejkkem
This document provides a parts list for the engine and accessories of a Massey Ferguson 298 tractor. It includes 24 items related to the engine, 4 items for the fan, 6 cylinder block parts, 8 crankshaft parts, 10 cylinder head parts, 12 rocker arm parts, and 14 cylinder head cover parts. The document lists each part number, quantity, description, and any additional comments for each item.
Massey ferguson mf 293 tractor service parts catalogue manual (part number 3...udfujjsejkkem
This document provides a parts list for a Massey Ferguson MF 293 tractor with the serial number 3310617. It includes detailed part numbers, descriptions, quantities and other specifications for various systems of the tractor including the cylinder block, crankshaft and flywheel, cylinder head and cover, rocker arm, timing gear, and lubricating oil system. The parts list contains over 50 individual components and is intended to aid in repairs and replacements for the tractor.
Massey ferguson mf 290 tractor (fr) service parts catalogue manual (part numb...udfujjsejkkem
This document provides a parts list and descriptions for an MF 290 tractor engine. It includes 3 pages of details about the engine, cylinders, crankshaft, pistons, connecting rods, flywheel, and cylinder head. The list contains 35 numbered items with descriptions of individual parts, part numbers, quantities, and additional comments clarifying part usage and replacements.
Massey ferguson mf 283 tractor service parts catalogue manual (part number 3...udfujjsejkkem
This document provides a parts list and exploded diagram for the Massey Ferguson MF 283 tractor, with part numbers and descriptions for various systems including the cylinder block, crankshaft, cylinder head, rocker arm, timing gear, and lubricating oil system. It includes 49 line items with information such as part numbers, quantities, descriptions, and notes. The parts list is broken into sections for different systems and includes diagrams showing the assembly of components.
Massey ferguson 6490 tractor service parts catalogue manual (part number 163...udfujjsejkkem
This document provides a list of parts for Massey Ferguson 6485/6490 tractors. It includes 25 items with part numbers, quantities, descriptions, and comments for components of the engine including the cylinder head, cylinder block, timing gear housing, crankshaft, pistons, and valve mechanism. The list appears to be from an engine overhaul or repair manual to identify replacement parts.
Massey ferguson 6485 tractor service parts catalogue manual (part number 163...udfujjsejkkem
This document provides a list of parts for Massey Ferguson 6485/6490 tractors. It includes 25 items with part numbers, quantities, descriptions, and comments for components of the engine including the cylinder head, cylinder block, timing gear housing, crankshaft, pistons, and valve mechanism. The list appears to be from an engine overhaul or repair manual to identify replacement parts.
John deere 80 c excavator service repair technical manual (tm1939)udfujjsejkkem
This document provides instructions for removing and installing a front idler, as well as disassembling and assembling the front idler. It describes removing the track chain, sliding the idler forward using a pry bar, attaching it to a hoist and removing it from the frame. It also details disassembling the idler by removing screws, pins, seals and other parts, and inspecting and replacing as needed. Reassembly involves cleaning parts, applying lubricants, and installing components in reverse order. Precautions are outlined for heavy lifting and handling metal face seals carefully.
This document provides instructions for servicing an excavator model EL180. It begins with general information and safety precautions for reassembly. It then lists the 13 step reassembly procedure which includes installing O-rings and backup rings, pressing parts together, applying grease, and tightening bolts. After reassembly, an inspection is conducted to check for air leaks. Storage standards and procedures are also provided to prevent rust during long-term storage of parts.
This document provides instructions for reassembling an excavator rotary joint. It outlines 13 steps for reassembly including installing O-rings and backup rings, applying grease, pressing parts together, and testing for air leaks. General precautions are noted such as checking for foreign material, applying grease to seals, and tightening bolts to the specified torque. The document also provides standards for storing the rotary joint or its parts for up to 12 months to prevent rust, including cleaning, applying protective coatings, and storing individually.
Caterpillar cat d8 r track type tractor dozer bulldozer (prefix rjm) service ...udfujjsejkkem
This document provides instructions for removing and installing track roller frames on a Caterpillar D8R track-type tractor. It outlines the required tools and safety precautions. The removal procedure involves separating the track, raising the machine with lift stands, installing a strap on the front bogie, and draining oil from the rear frame before removing bolts and disassembling the roller frame. Reinstallation is done in reverse order.
Caterpillar cat d8 r track type tractor dozer bulldozer (prefix mej) service ...udfujjsejkkem
The document provides instructions for disassembling the track roller frame of a D8R track-type tractor. It describes removing components such as the track rollers, idlers, bogies, cartridge pins, and seals. Tools required are listed. Detailed steps and illustrations show how to support and lift heavy parts, drain oil, and use pullers and wedges to separate interconnected pieces in a specific sequence. Safety notices warn of risks such as heavy weight and contained fluids.
Caterpillar cat d8 r track type tractor dozer bulldozer (prefix 9em) service ...udfujjsejkkem
This document provides instructions for servicing the steering pump on a Caterpillar D8R track-type tractor. It describes in detail how to assemble and install the steering pump. The assembly process involves installing various seals, springs, valves and other internal components in the correct order. Special tools and precautions are noted to properly protect components and ensure correct assembly. Finally, the document outlines installing the assembled pump, connecting hydraulic lines, and filling the system with oil.
Caterpillar cat 320 e l excavator (prefix ree) service repair manual (ree0000...udfujjsejkkem
This document provides instructions for removing and installing the front gear group on a 320E L excavator with a C6.6 engine. The procedure includes using various tools to lock the crankshaft, camshaft, and fuel injection pump in position before removing gears. Alignment marks should be made on the gears. Cleaning and inspecting components is specified before installing the gears back in their original alignment. Various torque specifications are provided for tightening bolts.
Caterpillar cat 320 d excavator (prefix jpd) service repair manual (jpd00001 ...udfujjsejkkem
The document provides instructions for removing and installing various engine components of a Caterpillar 320D excavator powered by a C6.4 engine. The steps include removing the fuel injection pump gear by taking out the nut and using a puller tool. Electronic unit injectors are removed by disconnecting harness assemblies, removing bolts, and using a pry bar. The turbocharger removal procedure involves loosening clamps and removing nuts and connecting tubes and hoses.
New holland tv145 tractor service repair manualudfujjsejkkem
This document provides a table of contents for a repair manual for a TV145 tractor. The table of contents lists numerous sections, numbered 00 through 88, that cover various systems of the tractor like the engine, transmission, axles, brakes, hydraulics and more. Each section contains multiple chapters that go into further detail. The document also provides general safety and operational considerations for working on the tractor.
New holland tj275 tractor service repair manualudfujjsejkkem
- This document provides safety information and warnings for operating machinery.
- Operators should read the entire manual and all safety signs on the machine before operating.
- When servicing a machine, always turn off the engine, set the parking brake, remove the key and block the wheels before working on it.
- Wear proper safety equipment like a hard hat, safety shoes, gloves, and eye protection when operating machinery. Loose clothing can get caught in moving parts.
Massey ferguson mf 377 tractor service parts catalogue manual (part number 3...udfujjsejkkem
This document provides part numbers and descriptions for components of a Massey Ferguson 377 tractor engine. It includes assemblies and parts for the engine block, cylinder head, crankshaft, pistons, connecting rods, and rocker shaft. The document lists each part number, quantity, description, and any relevant comments to aid in servicing or replacing the parts. It contains detailed exploded diagrams and part lists for the major engine assemblies.
Massey ferguson mf 355 tractor service parts catalogue manual (part number 8...udfujjsejkkem
This document provides part numbers and descriptions for components of a Massey Ferguson 355 tractor with serial number 819749. It includes sections on the engine installation, cylinder block, crankshaft and pistons, and cylinder head. The document lists part numbers, quantities, descriptions and additional comments for over 50 individual components.
Massey ferguson mf 333 tractor service parts catalogue manual (part number 3...udfujjsejkkem
This document contains parts lists and technical specifications for components of a Massey Ferguson 333 tractor engine. It includes lists of parts for the engine cylinder block, crankshaft, pistons, connecting rods, cylinder head, and rocker shaft. Each item is accompanied by details like part numbers, quantities, and any relevant comments. The lists contain over 75 individual part items in total.
Massey ferguson mf 298 tractor (gb) service parts catalogue manual (part numb...udfujjsejkkem
This document provides a parts list for engine installation on a Massey Ferguson 298 tractor. It contains 30 numbered items describing engine parts like the engine, bolts, spacers, and other components. Each item lists the part number, quantity, description, and any comments.
Massey ferguson mf 298 tractor (fr) service parts catalogue manual (part numb...udfujjsejkkem
This document provides a parts list for the engine and accessories of a Massey Ferguson 298 tractor. It includes 24 items related to the engine, 4 items for the fan, 6 cylinder block parts, 8 crankshaft parts, 10 cylinder head parts, 12 rocker arm parts, and 14 cylinder head cover parts. The document lists each part number, quantity, description, and any additional comments for each item.
Massey ferguson mf 293 tractor service parts catalogue manual (part number 3...udfujjsejkkem
This document provides a parts list for a Massey Ferguson MF 293 tractor with the serial number 3310617. It includes detailed part numbers, descriptions, quantities and other specifications for various systems of the tractor including the cylinder block, crankshaft and flywheel, cylinder head and cover, rocker arm, timing gear, and lubricating oil system. The parts list contains over 50 individual components and is intended to aid in repairs and replacements for the tractor.
Massey ferguson mf 290 tractor (fr) service parts catalogue manual (part numb...udfujjsejkkem
This document provides a parts list and descriptions for an MF 290 tractor engine. It includes 3 pages of details about the engine, cylinders, crankshaft, pistons, connecting rods, flywheel, and cylinder head. The list contains 35 numbered items with descriptions of individual parts, part numbers, quantities, and additional comments clarifying part usage and replacements.
Massey ferguson mf 283 tractor service parts catalogue manual (part number 3...udfujjsejkkem
This document provides a parts list and exploded diagram for the Massey Ferguson MF 283 tractor, with part numbers and descriptions for various systems including the cylinder block, crankshaft, cylinder head, rocker arm, timing gear, and lubricating oil system. It includes 49 line items with information such as part numbers, quantities, descriptions, and notes. The parts list is broken into sections for different systems and includes diagrams showing the assembly of components.
Massey ferguson 6490 tractor service parts catalogue manual (part number 163...udfujjsejkkem
This document provides a list of parts for Massey Ferguson 6485/6490 tractors. It includes 25 items with part numbers, quantities, descriptions, and comments for components of the engine including the cylinder head, cylinder block, timing gear housing, crankshaft, pistons, and valve mechanism. The list appears to be from an engine overhaul or repair manual to identify replacement parts.
Massey ferguson 6485 tractor service parts catalogue manual (part number 163...udfujjsejkkem
This document provides a list of parts for Massey Ferguson 6485/6490 tractors. It includes 25 items with part numbers, quantities, descriptions, and comments for components of the engine including the cylinder head, cylinder block, timing gear housing, crankshaft, pistons, and valve mechanism. The list appears to be from an engine overhaul or repair manual to identify replacement parts.
John deere 80 c excavator service repair technical manual (tm1939)udfujjsejkkem
This document provides instructions for removing and installing a front idler, as well as disassembling and assembling the front idler. It describes removing the track chain, sliding the idler forward using a pry bar, attaching it to a hoist and removing it from the frame. It also details disassembling the idler by removing screws, pins, seals and other parts, and inspecting and replacing as needed. Reassembly involves cleaning parts, applying lubricants, and installing components in reverse order. Precautions are outlined for heavy lifting and handling metal face seals carefully.
This document provides instructions for servicing an excavator model EL180. It begins with general information and safety precautions for reassembly. It then lists the 13 step reassembly procedure which includes installing O-rings and backup rings, pressing parts together, applying grease, and tightening bolts. After reassembly, an inspection is conducted to check for air leaks. Storage standards and procedures are also provided to prevent rust during long-term storage of parts.
This document provides instructions for reassembling an excavator rotary joint. It outlines 13 steps for reassembly including installing O-rings and backup rings, applying grease, pressing parts together, and testing for air leaks. General precautions are noted such as checking for foreign material, applying grease to seals, and tightening bolts to the specified torque. The document also provides standards for storing the rotary joint or its parts for up to 12 months to prevent rust, including cleaning, applying protective coatings, and storing individually.
Caterpillar cat d8 r track type tractor dozer bulldozer (prefix rjm) service ...udfujjsejkkem
This document provides instructions for removing and installing track roller frames on a Caterpillar D8R track-type tractor. It outlines the required tools and safety precautions. The removal procedure involves separating the track, raising the machine with lift stands, installing a strap on the front bogie, and draining oil from the rear frame before removing bolts and disassembling the roller frame. Reinstallation is done in reverse order.
Caterpillar cat d8 r track type tractor dozer bulldozer (prefix mej) service ...udfujjsejkkem
The document provides instructions for disassembling the track roller frame of a D8R track-type tractor. It describes removing components such as the track rollers, idlers, bogies, cartridge pins, and seals. Tools required are listed. Detailed steps and illustrations show how to support and lift heavy parts, drain oil, and use pullers and wedges to separate interconnected pieces in a specific sequence. Safety notices warn of risks such as heavy weight and contained fluids.
Caterpillar cat d8 r track type tractor dozer bulldozer (prefix 9em) service ...udfujjsejkkem
This document provides instructions for servicing the steering pump on a Caterpillar D8R track-type tractor. It describes in detail how to assemble and install the steering pump. The assembly process involves installing various seals, springs, valves and other internal components in the correct order. Special tools and precautions are noted to properly protect components and ensure correct assembly. Finally, the document outlines installing the assembled pump, connecting hydraulic lines, and filling the system with oil.
Caterpillar cat 320 e l excavator (prefix ree) service repair manual (ree0000...udfujjsejkkem
This document provides instructions for removing and installing the front gear group on a 320E L excavator with a C6.6 engine. The procedure includes using various tools to lock the crankshaft, camshaft, and fuel injection pump in position before removing gears. Alignment marks should be made on the gears. Cleaning and inspecting components is specified before installing the gears back in their original alignment. Various torque specifications are provided for tightening bolts.
Caterpillar cat 320 d excavator (prefix jpd) service repair manual (jpd00001 ...udfujjsejkkem
The document provides instructions for removing and installing various engine components of a Caterpillar 320D excavator powered by a C6.4 engine. The steps include removing the fuel injection pump gear by taking out the nut and using a puller tool. Electronic unit injectors are removed by disconnecting harness assemblies, removing bolts, and using a pry bar. The turbocharger removal procedure involves loosening clamps and removing nuts and connecting tubes and hoses.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
2. SERVICE MANUAL
MAXXUM 110 EP , MAXXUM 110 Multicontroller EP , MAXXUM 115 EP
, MAXXUM 115 Multicontroller EP , MAXXUM 120 EP , MAXXUM 120
Multicontroller EP , MAXXUM 125 EP , MAXXUM 125 Multicontroller EP ,
MAXXUM 130 EP , MAXXUM 130 Multicontroller EP , MAXXUM 140 EP ,
MAXXUM 140 Multicontroller EP , MAXXUM CVT 110 , MAXXUM CVT 120 ,
MAXXUM CVT 130
47665857 26/02/2014
EN
3. Link Product / Engine
Product Market Product Engine
MAXXUM CVT 110 International Region F4DFE413C*A
MAXXUM CVT 120 International Region F4DFE413B*A
MAXXUM CVT 130 International Region F4DFE413A*A
MAXXUM 110 EP International Region F4DFE413E*A
MAXXUM 110 Multicontroller EP International Region F4DFE413C*A
MAXXUM 115 EP International Region F4DFE613F*A
MAXXUM 115 Multicontroller EP International Region F4DFE613F*A
MAXXUM 120 EP International Region F4DFE413D*A
MAXXUM 120 Multicontroller EP International Region F4DFE413B*A
MAXXUM 125 EP International Region F4DFE613E*A
MAXXUM 125 Multicontroller EP International Region F4DFE613E*A
MAXXUM 130 EP International Region F4DFE413C*A
MAXXUM 130 Multicontroller EP International Region F4DFE413A*A
MAXXUM 140 EP International Region F4DFE6132*A
MAXXUM 140 Multicontroller EP International Region F4DFE6132*A
47665857 26/02/2014
10. INTRODUCTION
Foreword
IMPORTANT INFORMATION
All repair and maintenance works listed in this manual must be carried out only by staff belonging to the CASE IH
Service network, strictly complying with the instructions given and using, whenever required, the special tools.
Anyone who carries out the above operations without complying with the prescriptions shall be responsible for the
subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional or
local dealers, reject any responsibility for damages due to the anomalous behavior of parts and/or components not
approved by the manufacturer himself, including those used for the servicing or repair of the product manufactured
or marketed by the Manufacturer. In any case, no warranty is given or attributed on the product manufactured or
marketed by the Manufacturer in case of damages due to an anomalous behavior of parts and/or components not
approved by the Manufacturer.
No reproduction, though partial of text and illustrations allowed.
47665857 26/02/2014
3
11. INTRODUCTION
Foreword - How to use and navigate through this manual
This manual has been produced by a new technical information system. This new system is designed to deliver
technical information electronically through web delivery (eTIM), DVD, and paper manuals. A coding system called
SAP has been developed to link the technical information to other Product Support functions, e.g., Warranty.
Technical information is written to support the maintenance and service of the functions or systems on a customer's
machine. When a customer has a concern on their machine it is usually because a function or system on their ma-
chine is not working at all, is not working efficiently, or is not responding correctly to their commands. When you refer
to the technical information in this manual to resolve that customer's concern, you will find all the information classified
using the SAP coding, according to the functions or systems on that machine. Once you have located the technical
information for that function or system, you will then find all the mechanical, electrical or hydraulic devices, compo-
nents, assemblies, and sub assemblies for that function or system. You will also find all the types of information that
have been written for that function or system: the technical data (specifications), the functional data (how it works),
the diagnostic data (fault codes and troubleshooting), and the service data (remove, install adjust, etc.).
By integrating SAP coding into technical information, you will be able to search and retrieve just the right piece of
technical information you need to resolve that customer's concern on his machine. This is made possible by attaching
3 categories to each piece of technical information during the authoring process.
The first category is the Location, the second category is the Information Type and the third category is the Product:
• LOCATION - the component or function on the machine, that the piece of technical information is going to describe
(e.g., Fuel tank).
• INFORMATION TYPE - the piece of technical information that has been written for a particular component or func-
tion on the machine (e.g., Capacity would be a type of Technical Data describing the amount of fuel held by the fuel
tank).
• PRODUCT - the model for which the piece of technical information is written.
Every piece of technical information will have those three categories attached to it. You will be able to use any combi-
nation of those categories to find the right piece of technical information you need to resolve that customer's concern
on their machine.
That information could be:
• the procedure for how to remove the cylinder head
• a table of specifications for a hydraulic pump
• a fault code
• a troubleshooting table
• a special tool
47665857 26/02/2014
4
12. SERVICE MANUAL
Engine
MAXXUM 110 EP , MAXXUM 110 Multicontroller EP , MAXXUM 115 EP
, MAXXUM 115 Multicontroller EP , MAXXUM 120 EP , MAXXUM 120
Multicontroller EP , MAXXUM 125 EP , MAXXUM 125 Multicontroller EP ,
MAXXUM 130 EP , MAXXUM 130 Multicontroller EP , MAXXUM 140 EP ,
MAXXUM 140 Multicontroller EP , MAXXUM CVT 110 , MAXXUM CVT 120 ,
MAXXUM CVT 130
47665857 26/02/2014
10
13. Engine - Engine and crankcase
Engine - Disconnect
MAXXUM 115 EP INT
MAXXUM 115 Multicontroller EP INT
MAXXUM 125 EP INT
MAXXUM 125 Multicontroller EP INT
MAXXUM 140 EP INT
MAXXUM 140 Multicontroller EP INT
Prior operation:
Discharge the Air conditioning system, for further information refer to Air conditioning - Discharging (50.200)
Prior operation:
Disconnect battery, for further information refer to Battery - Disconnect (55.302)
Prior operation:
Drain the engine coolant system, for further information refer to Engine cooling system - Drain fluid (10.400)
Prior operation:
Remove the selective catalytic reduction (SRC) muffler, for further information refer to Selective Catalytic Reduction
(SCR) muffler and catalyst - Remove (10.500)
Prior operation:
Remove the selective catalytic reduction (SRC) coolant control valve, for further information refer to Coolant control
valve - Remove (10.500)
WARNING
Heavy objects!
Lift and handle all heavy components using lift-
ing equipment with adequate capacity. Always
support units or parts with suitable slings or
hooks. Make sure the work area is clear of all
bystanders.
Failure to comply could result in death or seri-
ous injury.
W0398A
WARNING
Avoid injury!
Handle all parts carefully. Do not place your
hands or fingers between parts. Use Personal
Protective Equipment (PPE) as indicated in this
manual, including protective goggles, gloves,
and safety footwear.
Failure to comply could result in death or seri-
ous injury.
W0208A
1. Using suitable lifting equipment support the front
weights.
BAIL08CVT011AVA 1
47665857 26/02/2014
10.1 [10.001] / 13
14. Engine - Engine and crankcase
2. Disconnect and remove the front weights from the
weight carrier.
BAIL08CVT012AVA 2
3. Disconnect the radar electrical connector and remove
the radar (if fitted).
BAIL10CVT358AVA 3
4. Remove the flywheel speed sensor.
BAIS06CCM087AVA 4
5. Disconnect the engine harness electrical connectors.
BAIL12APH142AVA 5
47665857 26/02/2014
10.1 [10.001] / 14
15. Engine - Engine and crankcase
6. Detach the cab heater return pipe.
BAIL07APH121AVA 6
7. Disconnect the oil cooler supply pipes.
BAIL12APH143AVA 7
8. Disconnect the oil cooler supply and return pipes (1).
Remove the oil cooler pipes (2).
BAIL12APH144AVA 8
9. Disconnect the heater supply hose from the rear of the
engine cylinder head.
BAIL12APH145AVA 9
47665857 26/02/2014
10.1 [10.001] / 15
16. Engine - Engine and crankcase
10. Remove the starter motor heat shield.
BAIL12APH146AVA 10
11. Remove the starter motor cover.
BAIL10CVT361AVA 11
12. Disconnect the starter motor electrical connector.
BAIL10CVT363AVA 12
13. Disconnect the positive terminal (1), negative terminal
(2) relay and bracket (3) and position to one side.
BAIL12APH147AVA 13
47665857 26/02/2014
10.1 [10.001] / 16
17. Engine - Engine and crankcase
14. Disconnect the starter motor negative cables.
BAIL10CVT364AVA 14
15. Detach the alternator wiring harness electrical con-
nector from the bracket (1) and detach the wiring har-
ness (2).
BAIL10CVT365AVA 15
16. Disconnect the alternator electrical connectors.
BAIL10CVT366AVA 16
17. Disconnect the brake fluid reservoir electrical connec-
tor (1) and detach the brake fluid reservoir (2) and po-
sition it to one side.
BAIL10CVT367AVA 17
47665857 26/02/2014
10.1 [10.001] / 17
18. Engine - Engine and crankcase
18. Remove the front brake retaining bracket (1) and re-
move the front brake pipe (2).
BAIL12APH148AVA 18
19. Disconnect the A/C pipe from the A/C compressor.
NOTE: Install blanking plugs/caps to all openings to pre-
vent dirt ingress.
BAIL10CVT368AVA 19
20. Disconnect the high pressure A/C pipe (1).
Disconnect the low pressure switch electrical connec-
tor (2).
BAIL12APH149AVA 20
21. Disconnect the charge air cooler intake pipe.
BAIL12APH150AVA 21
47665857 26/02/2014
10.1 [10.001] / 18
19. Engine - Engine and crankcase
22. Detach the A/C pipes and position it to one side.
BAIL12APH151AVA 22
23. Disconnect the steering hoses.
NOTE: Mark the hoses to aid installation.
BAIL07APH105AVB 23
24. Disconnect the fuel supply line from the pre-filter/wa-
ter trap.
BAIL12APH152AVA 24
25. Disconnect the fuel return line (1).
Disconnect the flywheel electrical connector (2).
BAIL12APH153AVA 25
47665857 26/02/2014
10.1 [10.001] / 19
20. Engine - Engine and crankcase
26. Cut the cable ties.
BAIL12APH154AVA 26
27. Cut the starter motor wiring harness cable ties.
BAIL12APH155AVA 27
28. Disconnect the engine earth connector.
BAIL10CVT433AVA 28
29. Disconnect the diff lock supply pipe (1) and pneumatic
brake supply pipe (2).
Remove the pipe retaining bracket (3) and remove the
pipes.
BAIL07APH379AVA 29
NOTE: Repeat the operation on both sides of the vehicle.
47665857 26/02/2014
10.1 [10.001] / 20
21. Engine - Engine and crankcase
30.
Vehicles with standard front axle
31. Remove the front wheel drive shaft guard and drive
shaft.
NOTE: The type of drive shaft fitted is dependant on type
of front axle installed.
BSD1959A 30
32. Remove the drive shaft flange, where fitted.
BSD1917A 31
Vehicles with suspended front axle
33. Remove the front wheel drive shaft guard.
BAIL12APH156AVA 32
47665857 26/02/2014
10.1 [10.001] / 21
22. Engine - Engine and crankcase
34. Remove the circlip (1).
Slide the drive shaft sleeve (2).
BAIL12APH182AVA 33
35. Disconnect the drive shaft bearing carrier.
BAIL12APH158AVA 34
All vehicles
36. Using the tractor splitting equipment 380040228 In-
stall the larger wheeled part of the splitting equipment
under the front weight carrier.
BAIL12APH159AVA 35
37. Position the static part of the splitting equipment under
the transmission and secure to the transmission.
Install the smaller wheeled part of the splitting equip-
ment under the engine.
BAIL12APH160AVA 36
47665857 26/02/2014
10.1 [10.001] / 22
23. Engine - Engine and crankcase
38. Connect the two pieces of the wheeled splitting gear
together with the alignment bar.
BAIL12APH161AVA 37
39. Support the rear of the vehicle.
BAIL07APH145AVA 38
40. Remove the left-hand side engine to transmission se-
curing bolts.
NOTE: Repeat this step for the right-hand side.
BAIL07APH146BVA 39
47665857 26/02/2014
10.1 [10.001] / 23
24. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
25. Engine - Engine and crankcase
41. Remove the centre engine to transmission securing
bolt (2). Remove the top left-hand engine to transmis-
sion securing bolt (1).
NOTE: Repeat this step for the right-hand side.
BAIL07APH147AVA 40
42. Separate the engine from the transmission.
BAIL12APH161AVA 41
47665857 26/02/2014
10.1 [10.001] / 24
26. Engine - Engine and crankcase
Engine - Connect
MAXXUM 115 EP INT
MAXXUM 115 Multicontroller EP INT
MAXXUM 125 EP INT
MAXXUM 125 Multicontroller EP INT
MAXXUM 140 EP INT
MAXXUM 140 Multicontroller EP INT
WARNING
Heavy objects!
Lift and handle all heavy components using lift-
ing equipment with adequate capacity. Always
support units or parts with suitable slings or
hooks. Make sure the work area is clear of all
bystanders.
Failure to comply could result in death or seri-
ous injury.
W0398A
WARNING
Avoid injury!
Handle all parts carefully. Do not place your
hands or fingers between parts. Use Personal
Protective Equipment (PPE) as indicated in this
manual, including protective goggles, gloves,
and safety footwear.
Failure to comply could result in death or seri-
ous injury.
W0208A
All vehicles
1. Thoroughly clean the engine to transmission mating
surfaces and apply a bead of sealant.
2. Align the front support and engine assembly to the
transmission and relocate.
Tighten to 285-315 Nm ( 210-232 lb ft).
BAIL12APH161AVA 1
47665857 26/02/2014
10.1 [10.001] / 25
27. Engine - Engine and crankcase
3. Install the centre engine to transmission securing bolt
(2). Install the top left hand engine to transmission se-
curing bolt (1). Tighten to 285-315 Nm ( 210-232 lb ft).
NOTE: Repeat this step for the right-hand side.
BAIL07APH147AVA 2
4. Install the left-hand side engine to transmission secur-
ing bolts.
NOTE: Repeat this step for the right-hand side.
BAIL07APH146BVA 3
5. Remove the support from the rear of the vehicle.
BAIL07APH145AVA 4
47665857 26/02/2014
10.1 [10.001] / 26