This document is a service manual for Farmall 40C and 50C compact tractors with Tier 4B engines. It provides part numbers, specifications, and repair/maintenance instructions for the engine, transmission, axles, brakes, hydraulics, hitches, steering, wheels, climate control, electrical systems, cab/body, and other components. Safety precautions are outlined regarding working with refrigerants and avoiding contamination when servicing air conditioning systems.
Case ih farmall 40 c tier 4b (final) compact tractor service repair manualjfdjjskfkksmemm
This document is a service manual for Farmall 40C and 50C compact tractors with Tier 4B engines. It provides part numbers, specifications, repair and maintenance instructions, diagrams, and troubleshooting information for the engine, transmission, axles, brakes, hydraulics, electrical systems, cab climate control, and other components. The manual is intended to assist technicians in servicing and repairing these tractor models.
New holland t8.355 tractor service repair manualdfjjkskemsme
This document provides a service manual for CNH Industrial T8.270, T8.295, T8.325, T8.355, and T8.385 tractors. It contains an introduction and safety rules section, followed by detailed sections covering the engine, transmission, axles, hydraulics, electrical systems, and other components. The manual includes specifications, maintenance and repair instructions to service all aspects of the tractors.
Case ih axial flow 9240 tier 2 combine service repair manualufusjfjkkekm
This service manual provides information for servicing the engines used in Axial-Flow 7240, 8240, and 9240 combines. It details removing and installing various engine components like the crankcase, air intake and exhaust systems, fuel lines, cooling systems, and emissions equipment. Safety precautions are provided to avoid injury when working on the engine.
Case ih magnum 235 continuously variable transmission (cvt) tractor service r...fujsjfjkskkem
This document is the service manual for Case IH Magnum tractors models 235, 260, 290, 315, 340, and 370 from 2013. It contains instructions for repair and maintenance of the engine, transmission, axles, hydraulics, pneumatics, electrical systems, cab, and other components. A foreword emphasizes that all repair and maintenance work must only be done by qualified dealership personnel strictly following the instructions provided using any special tools as needed.
Case 695 st stage iiib tractor backhoe loader service repair manualufjjjsefkskem
This document is a service manual for 580ST, 590ST, and 695ST tractor backhoe loaders with Stage IIIB engines. It contains introduction information and sections covering the machine completion and equipment, engine, transmission, four-wheel drive system, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, booms dippers and buckets, and platform cab bodywork and decals. It provides important notices that all repair and maintenance work must be carried out only by qualified dealership personnel strictly following the instructions.
Case ih farmall 50 c tier 4b (final) compact tractor service repair manualfhsjjefksekme
This document is a service manual for Farmall 40C and 50C compact tractors with Tier 4B engines. It provides part numbers, specifications, repair and maintenance instructions, diagrams, and troubleshooting information for the engine, transmission, axles, brakes, hydraulics, steering, wheels, cab climate control, electrical systems, and other components. The manual is intended to assist technicians in servicing and repairing these tractor models.
Case ih farmall 40 c tier 4b (final) compact tractor service repair manualfjjskksekmemm
This document is a service manual for Farmall 40C and 50C compact tractors with Tier 4B engines. It provides part numbers, specifications, repair and maintenance instructions, diagrams, and troubleshooting information for the engine, transmission, axles, brakes, hydraulics, electrical systems, cab climate control, and other components. The manual is intended to assist technicians in servicing and repairing these tractor models.
Case ih farmall 50 c tier 4b (final) compact tractor service repair manualjfjkskekemm
This document is a service manual for Farmall 40C and 50C compact tractors with Tier 4B engines. It provides part numbers, specifications, repair and maintenance instructions, diagrams, and troubleshooting information for the engine, transmission, axles, brakes, hydraulics, electrical systems, cab climate control, and other components. The manual is intended to assist technicians in servicing and repairing these tractor models.
Case ih farmall 40 c tier 4b (final) compact tractor service repair manualjfdjjskfkksmemm
This document is a service manual for Farmall 40C and 50C compact tractors with Tier 4B engines. It provides part numbers, specifications, repair and maintenance instructions, diagrams, and troubleshooting information for the engine, transmission, axles, brakes, hydraulics, electrical systems, cab climate control, and other components. The manual is intended to assist technicians in servicing and repairing these tractor models.
New holland t8.355 tractor service repair manualdfjjkskemsme
This document provides a service manual for CNH Industrial T8.270, T8.295, T8.325, T8.355, and T8.385 tractors. It contains an introduction and safety rules section, followed by detailed sections covering the engine, transmission, axles, hydraulics, electrical systems, and other components. The manual includes specifications, maintenance and repair instructions to service all aspects of the tractors.
Case ih axial flow 9240 tier 2 combine service repair manualufusjfjkkekm
This service manual provides information for servicing the engines used in Axial-Flow 7240, 8240, and 9240 combines. It details removing and installing various engine components like the crankcase, air intake and exhaust systems, fuel lines, cooling systems, and emissions equipment. Safety precautions are provided to avoid injury when working on the engine.
Case ih magnum 235 continuously variable transmission (cvt) tractor service r...fujsjfjkskkem
This document is the service manual for Case IH Magnum tractors models 235, 260, 290, 315, 340, and 370 from 2013. It contains instructions for repair and maintenance of the engine, transmission, axles, hydraulics, pneumatics, electrical systems, cab, and other components. A foreword emphasizes that all repair and maintenance work must only be done by qualified dealership personnel strictly following the instructions provided using any special tools as needed.
Case 695 st stage iiib tractor backhoe loader service repair manualufjjjsefkskem
This document is a service manual for 580ST, 590ST, and 695ST tractor backhoe loaders with Stage IIIB engines. It contains introduction information and sections covering the machine completion and equipment, engine, transmission, four-wheel drive system, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, front loader and bucket, booms dippers and buckets, and platform cab bodywork and decals. It provides important notices that all repair and maintenance work must be carried out only by qualified dealership personnel strictly following the instructions.
Case ih farmall 50 c tier 4b (final) compact tractor service repair manualfhsjjefksekme
This document is a service manual for Farmall 40C and 50C compact tractors with Tier 4B engines. It provides part numbers, specifications, repair and maintenance instructions, diagrams, and troubleshooting information for the engine, transmission, axles, brakes, hydraulics, steering, wheels, cab climate control, electrical systems, and other components. The manual is intended to assist technicians in servicing and repairing these tractor models.
Case ih farmall 40 c tier 4b (final) compact tractor service repair manualfjjskksekmemm
This document is a service manual for Farmall 40C and 50C compact tractors with Tier 4B engines. It provides part numbers, specifications, repair and maintenance instructions, diagrams, and troubleshooting information for the engine, transmission, axles, brakes, hydraulics, electrical systems, cab climate control, and other components. The manual is intended to assist technicians in servicing and repairing these tractor models.
Case ih farmall 50 c tier 4b (final) compact tractor service repair manualjfjkskekemm
This document is a service manual for Farmall 40C and 50C compact tractors with Tier 4B engines. It provides part numbers, specifications, repair and maintenance instructions, diagrams, and troubleshooting information for the engine, transmission, axles, brakes, hydraulics, electrical systems, cab climate control, and other components. The manual is intended to assist technicians in servicing and repairing these tractor models.
Case ih farmall 35 a tier 4b (final) compact tractor service repair manualfujsekfkksemm
This document is a service manual for Case IH Farmall 35A and 40A compact tractors from model years 2017 containing sections on the engine, transmission, brakes, hydraulics, hitches, steering, wheels, electrical systems, and cab/bodywork. It provides repair and maintenance instructions for authorized dealership personnel and warns that any work done without following procedures may void warranties.
Case ih farmall 35 a tier 4b (final) compact tractor service repair manualfjskefksemer
This document is a service manual for Case IH Farmall 35A and 40A compact tractors from model years 2017 containing sections on the engine, transmission, brakes, hydraulics, hitches, steering, wheels, electrical systems, and cab/bodywork. It provides repair and maintenance instructions for authorized dealership personnel and warns that any work done without following procedures may void warranties.
Case ih farmall 40 a tier 4b (final) compact tractor service repair manualfjskefksemer
This service manual section provides information for servicing the engine and crankcase on Farmall 35A and 40A compact tractors, including removing and installing the engine. The manual instructs technicians to drain fluids from the hydrostatic transmission, mechanical transmission, and engine cooling system prior to engine removal. It also instructs removal of the hood and radiator.
Case ih farmall 40 a tier 4b (final) compact tractor service repair manualfjskekmsemmwe
This service manual section provides information for servicing the engine and crankcase on Farmall 35A and 40A compact tractors, including removing and installing the engine. The manual instructs technicians to drain fluids from the hydrostatic transmission, mechanical transmission, and engine cooling system prior to engine removal. It also instructs removal of the hood and radiator.
Case ih farmall 40 a tier 4b (final) compact tractor service repair manualjfdjjskekksemm
This section describes how to remove the engine from a tractor. It outlines necessary prior steps including draining fluids from the hydrostatic transmission, mechanical transmission, removing the hood and radiator. Notes are provided to cap off all hydraulic and fuel fittings to prevent contamination and to note the placement of any cable ties for reinstallation.
Case ih farmall 40 a tier 4b (final) compact tractor service repair manualjfjskeksemm
This section describes how to remove the engine from a tractor. It outlines necessary prior steps including draining fluids from the hydrostatic transmission, mechanical transmission, removing the hood and radiator. Notes are provided to cap off all hydraulic and fuel fittings to prevent contamination and to note the placement of any cable ties for reinstallation.
Case ih farmall 35 a tier 4b (final) compact tractor service repair manualjfdjjskekksemm
This section describes how to remove the engine from a tractor. It involves draining fluids from the hydrostatic transmission, mechanical transmission, and engine cooling system. The hood, radiator, and any attached components must be removed first. All hydraulic and fuel fittings must be capped off to prevent contamination. Cable ties securing wiring harnesses should be noted for reinstallation.
Case ih farmall 35 a tier 4b (final) compact tractor service repair manualfujsjefjskekmme
This section describes how to remove the engine from a tractor. It outlines necessary prior steps including draining fluids from the hydrostatic transmission, mechanical transmission, removing the hood and radiator. Notes are provided to cap off all hydraulic and fuel fittings to prevent contamination and to note the placement of any cable ties for reinstallation.
CASE IH FARMALL 40A Tier 4B (final) Compact Tractor Service Repair Manual.pdfkfdmdmmd
Remove engine
1. Drain engine oil and coolant. Disconnect battery ground cable.
2. Disconnect all wiring harnesses, fuel lines, hydraulic lines, and air lines from the engine. Note placement of any cable ties for reassembly.
3. Remove any brackets or hardware securing the engine to the frame.
4. Use an engine lift to raise the engine from the tractor and remove it. Take care to avoid damaging any components.
CASE IH FARMALL 35A Tier 4B (final) Compact Tractor Service Repair Manual.pdffujsiemd8dudj
This document is a service manual for Case IH Farmall 35A and 40A compact tractors from model years 2017. It contains sections covering the engine, transmission, axles, brakes, hydraulics, hitches, steering, electrical systems, cab, and platform. Safety notices are included, stating that only qualified dealership personnel should perform repairs following the procedures in the manual using recommended tools. The manufacturer accepts no responsibility for damages caused by unauthorized parts or repairs.
CASE IH FARMALL 35A Tier 4B (final) Compact Tractor Service Repair Manual.pdffkmsiejdkdmd3e
This document is a service manual for Case IH Farmall 35A and 40A compact tractors from model years 2017. It contains sections covering the engine, transmission, axles, brakes, hydraulics, hitches, steering, electrical systems, cab, and platform. Safety notices are included, stating that only qualified dealership personnel should perform repairs following the procedures in the manual using recommended tools. The manufacturer accepts no responsibility for damages caused by unauthorized parts or repairs.
Doosan mega 160 wheeled loader parts catalogue manualfjjskekfsem
The document provides a parts list and exploded diagram of a cylinder head assembly. It lists over 100 individual part numbers, descriptions, quantities, serial numbers and replacement part information. The cylinder head assembly drawing shows the main components which include the cylinder head, valves, guides, seats, plugs and related mounting hardware.
Doosan e85 compact excavator parts catalogue manualfjjskekfsem
This document contains a parts list and descriptions for a cylinder block assembly. It lists 31 individual parts that make up the cylinder block including the block itself, plugs, bolts, bushes, pins, and other components. It provides the part number, description, quantity, and other identifying information for each part.
Doosan e80 compact excavator parts catalogue manualfjjskekfsem
This document contains parts lists and diagrams for various components of an engine, including the cylinder block, gear housing, flywheel housing, oil pan, cylinder head, suction manifold, exhaust manifold, camshaft, crankshaft, pistons, and lubrication oil system. It lists part numbers, descriptions, quantities, and other identifying information for over 50 individual parts across 18 figures.
Doosan e63 compact excavator parts catalogue manualfjjskekfsem
This document provides a parts list and descriptions for various components of an engine, including:
- The cylinder block assembly and related plugs and bolts.
- The gear housing, oil pump, seals, bolts, and covers.
- The flywheel housing, oil pan, seals, and bolts.
- The cylinder head, valves, springs, seals, bolts, and related components.
- The intake manifold, sensors, bolts, and throttle body.
- The exhaust manifold, sensors, bolts, pipes, and EGR components.
- The DPF muffler, sensors, case, bolts, pipes, and brackets.
-
Doosan e55 w compact excavator parts catalogue manualfjjskekfsem
This document contains figures and part numbers for various engine components of an E55W engine, including the cylinder block, gear housing, flywheel housing, cylinder head, intake manifold, exhaust manifold, cam shaft, crank shaft, piston, lubrication oil system, and cooling water system. It provides exploded diagrams of the components with corresponding part numbers, descriptions, and quantities for each part.
Doosan dl420 a wheeled loader parts catalogue manualfjjskekfsem
This document contains parts lists and diagrams for various components of a diesel engine. It includes lists of parts, part numbers, descriptions and quantities for items like the cylinder block, timing gear case, flywheel housing, driving system, cylinder head, cylinder head cover, and timing system. Serial numbers are provided for some replaceable parts.
More Related Content
Similar to Case ih farmall 50 c tier 4b (final) compact tractor service repair manual
Case ih farmall 35 a tier 4b (final) compact tractor service repair manualfujsekfkksemm
This document is a service manual for Case IH Farmall 35A and 40A compact tractors from model years 2017 containing sections on the engine, transmission, brakes, hydraulics, hitches, steering, wheels, electrical systems, and cab/bodywork. It provides repair and maintenance instructions for authorized dealership personnel and warns that any work done without following procedures may void warranties.
Case ih farmall 35 a tier 4b (final) compact tractor service repair manualfjskefksemer
This document is a service manual for Case IH Farmall 35A and 40A compact tractors from model years 2017 containing sections on the engine, transmission, brakes, hydraulics, hitches, steering, wheels, electrical systems, and cab/bodywork. It provides repair and maintenance instructions for authorized dealership personnel and warns that any work done without following procedures may void warranties.
Case ih farmall 40 a tier 4b (final) compact tractor service repair manualfjskefksemer
This service manual section provides information for servicing the engine and crankcase on Farmall 35A and 40A compact tractors, including removing and installing the engine. The manual instructs technicians to drain fluids from the hydrostatic transmission, mechanical transmission, and engine cooling system prior to engine removal. It also instructs removal of the hood and radiator.
Case ih farmall 40 a tier 4b (final) compact tractor service repair manualfjskekmsemmwe
This service manual section provides information for servicing the engine and crankcase on Farmall 35A and 40A compact tractors, including removing and installing the engine. The manual instructs technicians to drain fluids from the hydrostatic transmission, mechanical transmission, and engine cooling system prior to engine removal. It also instructs removal of the hood and radiator.
Case ih farmall 40 a tier 4b (final) compact tractor service repair manualjfdjjskekksemm
This section describes how to remove the engine from a tractor. It outlines necessary prior steps including draining fluids from the hydrostatic transmission, mechanical transmission, removing the hood and radiator. Notes are provided to cap off all hydraulic and fuel fittings to prevent contamination and to note the placement of any cable ties for reinstallation.
Case ih farmall 40 a tier 4b (final) compact tractor service repair manualjfjskeksemm
This section describes how to remove the engine from a tractor. It outlines necessary prior steps including draining fluids from the hydrostatic transmission, mechanical transmission, removing the hood and radiator. Notes are provided to cap off all hydraulic and fuel fittings to prevent contamination and to note the placement of any cable ties for reinstallation.
Case ih farmall 35 a tier 4b (final) compact tractor service repair manualjfdjjskekksemm
This section describes how to remove the engine from a tractor. It involves draining fluids from the hydrostatic transmission, mechanical transmission, and engine cooling system. The hood, radiator, and any attached components must be removed first. All hydraulic and fuel fittings must be capped off to prevent contamination. Cable ties securing wiring harnesses should be noted for reinstallation.
Case ih farmall 35 a tier 4b (final) compact tractor service repair manualfujsjefjskekmme
This section describes how to remove the engine from a tractor. It outlines necessary prior steps including draining fluids from the hydrostatic transmission, mechanical transmission, removing the hood and radiator. Notes are provided to cap off all hydraulic and fuel fittings to prevent contamination and to note the placement of any cable ties for reinstallation.
CASE IH FARMALL 40A Tier 4B (final) Compact Tractor Service Repair Manual.pdfkfdmdmmd
Remove engine
1. Drain engine oil and coolant. Disconnect battery ground cable.
2. Disconnect all wiring harnesses, fuel lines, hydraulic lines, and air lines from the engine. Note placement of any cable ties for reassembly.
3. Remove any brackets or hardware securing the engine to the frame.
4. Use an engine lift to raise the engine from the tractor and remove it. Take care to avoid damaging any components.
CASE IH FARMALL 35A Tier 4B (final) Compact Tractor Service Repair Manual.pdffujsiemd8dudj
This document is a service manual for Case IH Farmall 35A and 40A compact tractors from model years 2017. It contains sections covering the engine, transmission, axles, brakes, hydraulics, hitches, steering, electrical systems, cab, and platform. Safety notices are included, stating that only qualified dealership personnel should perform repairs following the procedures in the manual using recommended tools. The manufacturer accepts no responsibility for damages caused by unauthorized parts or repairs.
CASE IH FARMALL 35A Tier 4B (final) Compact Tractor Service Repair Manual.pdffkmsiejdkdmd3e
This document is a service manual for Case IH Farmall 35A and 40A compact tractors from model years 2017. It contains sections covering the engine, transmission, axles, brakes, hydraulics, hitches, steering, electrical systems, cab, and platform. Safety notices are included, stating that only qualified dealership personnel should perform repairs following the procedures in the manual using recommended tools. The manufacturer accepts no responsibility for damages caused by unauthorized parts or repairs.
Doosan mega 160 wheeled loader parts catalogue manualfjjskekfsem
The document provides a parts list and exploded diagram of a cylinder head assembly. It lists over 100 individual part numbers, descriptions, quantities, serial numbers and replacement part information. The cylinder head assembly drawing shows the main components which include the cylinder head, valves, guides, seats, plugs and related mounting hardware.
Doosan e85 compact excavator parts catalogue manualfjjskekfsem
This document contains a parts list and descriptions for a cylinder block assembly. It lists 31 individual parts that make up the cylinder block including the block itself, plugs, bolts, bushes, pins, and other components. It provides the part number, description, quantity, and other identifying information for each part.
Doosan e80 compact excavator parts catalogue manualfjjskekfsem
This document contains parts lists and diagrams for various components of an engine, including the cylinder block, gear housing, flywheel housing, oil pan, cylinder head, suction manifold, exhaust manifold, camshaft, crankshaft, pistons, and lubrication oil system. It lists part numbers, descriptions, quantities, and other identifying information for over 50 individual parts across 18 figures.
Doosan e63 compact excavator parts catalogue manualfjjskekfsem
This document provides a parts list and descriptions for various components of an engine, including:
- The cylinder block assembly and related plugs and bolts.
- The gear housing, oil pump, seals, bolts, and covers.
- The flywheel housing, oil pan, seals, and bolts.
- The cylinder head, valves, springs, seals, bolts, and related components.
- The intake manifold, sensors, bolts, and throttle body.
- The exhaust manifold, sensors, bolts, pipes, and EGR components.
- The DPF muffler, sensors, case, bolts, pipes, and brackets.
-
Doosan e55 w compact excavator parts catalogue manualfjjskekfsem
This document contains figures and part numbers for various engine components of an E55W engine, including the cylinder block, gear housing, flywheel housing, cylinder head, intake manifold, exhaust manifold, cam shaft, crank shaft, piston, lubrication oil system, and cooling water system. It provides exploded diagrams of the components with corresponding part numbers, descriptions, and quantities for each part.
Doosan dl420 a wheeled loader parts catalogue manualfjjskekfsem
This document contains parts lists and diagrams for various components of a diesel engine. It includes lists of parts, part numbers, descriptions and quantities for items like the cylinder block, timing gear case, flywheel housing, driving system, cylinder head, cylinder head cover, and timing system. Serial numbers are provided for some replaceable parts.
Doosan dl200 tc wheeled loader parts catalogue manualfjjskekfsem
This document provides a parts list and diagrams for the cylinder head and related components of a diesel engine. It includes images and lists of parts with descriptions, part numbers, quantities, serial numbers and replacement part information. The list contains over 80 individual part items or assemblies that make up the cylinder head, valves, springs, guides, cover, gaskets and related hardware.
Doosan 460 plus tier 3 skid steer loader parts catalogue manualfjjskekfsem
This document contains parts lists and diagrams for various components of a diesel engine, including the cylinder block, gear housing, flywheel housing, cylinder head, intake manifold, exhaust manifold, cam shaft, crank shaft, piston, lubrication oil system, and cooling water system. It provides part numbers, descriptions, quantities, and other identifying information for over 50 individual parts across these various engine systems.
Daewoo doosan solar 500 lc v (500lcv) crawler excavator parts catalogue manualfjjskekfsem
The document provides a parts list for a muffler assembly, listing part numbers, descriptions, and quantities. It details different muffler sub-assembly and muffler part numbers used over different serial number ranges. Replacement part numbers are also provided where applicable.
Daewoo doosan solar 470 lc v crawler excavator parts catalogue manualfjjskekfsem
This document provides a parts list for a main frame assembly. It includes 3 frames, 2 weights, bolts, washers, brackets, and other minor parts. Serial numbers and replacement part numbers are provided for some items. A second similar document then lists parts for an engine mounting assembly, including an engine, radiator, hoses, mounts, brackets, and fasteners.
Daewoo doosan solar 450 lc v crawler excavator parts catalogue manualfjjskekfsem
The document provides a parts list and descriptions for a cylinder block assembly. It lists over 150 individual parts that make up the cylinder block, including the cylinder block itself, bearing caps, bolts, plugs, seals, switches, pipes, flanges, nozzles, brackets, and other miscellaneous parts. It provides the part numbers, descriptions, and quantities for each part.
New holland l228 tier 4 b (final) skid steer loader service repair manual [nf...fjjskekfsem
This document is a service manual for Tier 4B (final) and Stage IV 200 Series Skid Steer Loaders and Compact Track Loaders, including the L221, L228, C227, and C232 models. It contains sections covering the engine, power coupling, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, wheels, tracks and track suspension, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. Safety rules regarding ecology and the environment are also included. The manual provides repair and maintenance instructions to be carried out by qualified dealership personnel using the specified tools and procedures.
New holland cr10.90 combine harvesters service repair manualfjjskekfsem
This document is a service manual for CNH Industrial combine harvesters and covers models CX7.80 through CR10.90. It contains over 200 sections on the various systems of the combines, including the engine, transmission, hydraulic systems, electrical systems, attachments and more. The manual provides repair and maintenance information to technicians working on these agricultural machines.
New holland cx6080 tier 3 combine harvester service repair manualfjjskekfsem
This document is a service manual for CX5000 and CX6000 series machines. It contains sections on hydraulic, pneumatic, electrical and electronic systems, engines and emissions control, transmissions, axles, brakes, steering, frames, cabs, user platforms, environmental controls, frame positioning, tool positioning, lifting, leveling, crop processing, feeding, threshing, separating, cleaning, storing, unloading and fault codes. The manual provides technical data, functional descriptions, diagnostics and service procedures for components and systems.
New holland cr9.90 combine harvesters service repair manualfjjskekfsem
This document is a service manual for various combine harvester models from CNH Industrial. It contains an overview of the components covered in the manual, including the engine, transmissions, axles, brakes, hydraulics, steering, tracks, climate control, and electrical systems. The manual is organized by component group and provides part numbers to identify replacement parts.
New holland cx6080 cx6090 tier 4 combine harvester service repair manualfjjskekfsem
This document is a service manual for CX5000 and CX6000 series machines. It contains sections on hydraulic, pneumatic, electrical and electronic systems, engines and emissions control, transmissions, axles, brakes, steering, frames, cabs, user platforms, environmental controls, frame positioning, tool positioning, lifting, leveling, crop processing, feeding, threshing, separating, cleaning, storing, unloading and fault codes. The manual provides technical data, functional descriptions, diagnostics and service procedures for components and systems.
New holland cx7.80 combine harvesters service repair manualfjjskekfsem
This document is a service manual for CNH Industrial combine harvesters and covers models CX7.80 through CR10.90. It contains over 200 sections organized by technical system covering the engine, transmission, hydraulics, electrical systems, attachments and more. Safety information is provided at the beginning regarding accident prevention and fluid power system requirements.
New holland cr9090 elevation combine harvesters service repair manualfjjskekfsem
The hydraulic system uses a variable displacement pump to power the work functions and steering. Oil is distributed through the main frame and straw elevator stack valves to cylinders and motors. It returns through filters to the pump and reservoir shared with the hydrostatic system. The pump receives charge pressure from the hydrostatic return oil to operate without a separate charge pump.
New holland c227 stage iv compact track loader service repair manual [ndm4718...fjjskekfsem
This document is a service manual for Tier 4B (final) and Stage IV 200 Series Skid Steer Loaders and Compact Track Loaders, including the L221, L228, C227, and C232 models. It contains sections covering the engine, power coupling, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, wheels, tracks and track suspension, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. Safety rules regarding ecology and the environment are also included. The manual provides repair and maintenance instructions to be carried out by qualified dealership personnel using the specified tools and procedures.
Caterpillar cat 903 d compact wheel loader (prefix mzy) service repair manual...fjjskekfsem
This service manual document provides instructions for removing and installing various components on a 903D Compact Wheel Loader, including:
1) The steering frame lock, which must be connected before working on the machine to prevent frame movement.
2) The hydraulic tank, which requires draining fluid and removing numerous hoses, fittings and bolts.
3) The joystick control and mounting, which is removed by disconnecting cables and harnesses after opening cab doors and covers.
4) The steering cylinder, which is removed after relieving pressure and disconnecting hoses by removing pins and clamps.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
9. INTRODUCTION
Safety rules
Farmall® 40C NA
Farmall® 50C NA
Personal safety
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible death or injury.
Throughout this manual you will find the signal words DANGER, WARNING, and CAUTION followed by special in-
structions. These precautions are intended for the personal safety of you and those working with you.
Read and understand all the safety messages in this manual before you operate or service the machine.
DANGER indicates a hazardous situation that, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
FAILURE TO FOLLOW DANGER, WARNING, AND CAUTION MESSAGES COULD RESULT
IN DEATH OR SERIOUS INJURY.
Machine safety
NOTICE: Notice indicates a situation that, if not avoided, could result in machine or property damage.
Throughout this manual you will find the signal word Notice followed by special instructions to prevent machine or
property damage. The word Notice is used to address practices not related to personal safety.
Information
NOTE: Note indicates additional information that clarifies steps, procedures, or other information in this manual.
Throughout this manual you will find the word Note followed by additional information about a step, procedure, or
other information in the manual. The word Note is not intended to address personal safety or property damage.
47941906 16/03/2016
4
10. INTRODUCTION
Safety rules Service precautionary statements climate control
SERVICE PRECAUTIONARY STATEMENTS
Leak Testing
Recharging an air conditioning system that leaks simply allows more refrigerant to escape into the atmosphere and
ultimately leaves the system non-functioning and in need of additional charging.
Therefore, the proper service procedure is to locate and fix any leaks before putting any more refrigerant into the
system.
If a large amount of refrigerant has leaked out, the system pressure will be too low to identify all but the largest leaks.
In this case, partially recharge the system with no more than one pound of refrigerant to check for leaks.
NOTICE: • Any refrigerant introduced into the system for the purpose of finding leaks must also be recovered without
releasing it into the atmosphere.
• Always use the same type of refrigerant for checking leaks as was originally installed into the AC system by the
manufacturer.
• Never use compressed air to detect system leaks. The introduction of air into the system may create a fire or
explosion hazard, may overload the desiccant with moisture, and could contaminate the system with dirt and improper
oil.
All automotive type air conditioning systems leak to some extent. When servicing them it is important that leakage be
minimized. Much of the normal leakage comes from the slow seepage of refrigerant through the flexible hoses. Other
common sources of leaks are at joints between the flexible hose and metal tubing or at threaded hose connections.
These are usually much larger leaks than the natural seepage through the walls of the hose and are almost always
repairable.
Research by the EPA has found that leak detection can be difficult, but existing halogen leak detection systems are
adequate for the major task of finding and repairing leaks causing complaints. Dye stains are not very satisfactory for
finding small leaks.
Newer electronic leak detectors may offer even better leak detection capabilities. However, no single method can find
every leak. Electronic leak detectors may not detect leaks of all refrigerants. For example, older units designed to
detect R12 may not detect R134A. Be sure that the leak detector you use is state-of-the-art and that it is designed to
detect the refrigerant in the system you are servicing.
Service professionals must be extremely diligent in their work to correct all possible leaks. Diligence is essential to
ensure that no small, difficult-to-find leaks go undetected.
Before leaving a job, make one last leak check. Catching a leak just after service will save an inconvenient and
expensive return visit.
Refilling
Refill the air conditioning system using the weight method. The lubricants used in R134a tend to layer onto the walls
of the refrigeration system. This layering obscures the view through the sight glass. Visual methods of refilling R134a
systems will result in improper system charging. For this reason, we do not recommend the old practice of topping
off a partially discharged air conditioning system using the sight glass. The Farmall 40C/50C cab tractors use 700 g
(25 oz) of R134A refrigerant.
47941906 16/03/2016
6
11. INTRODUCTION
CONTAMINANTS
General
No mobile air conditioning system can operate for long without picking up some contaminants in the refrigerant. The
flexible hoses, for example, allow moisture and air to migrate into the refrigerant from the outside atmosphere. Mois-
ture and non-condensable gases (air) are the most common contaminants found in mobile air conditioning systems.
NOTICE: Contaminating R134A with R12 or CFC will lead to copper plating of steel components and major compres-
sor failure.
Lubricant and refrigerant that remain in service equipment can be contaminants. When you recover a refrigerant, you
also will capture a certain amount of lubricant in the extraction or recovery equipment. The equipment will drain the
lubricant in a catch bottle or reservoir for measurement and proper final disposal.
Never use a lubricant that has come out of an air conditioning system. Reusing this oil will result in contamination of
the air conditioning system with refrigerant, moisture and air from the old oil. Instead, refill the air conditioning system
using fresh oil in the same amount as that removed during service. Dispose of the used oils in a manner that complies
with federal, state and local disposal requirements.
To avoid contamination between systems using dissimilar refrigerants, the extraction and recycling equipment MUST
be dedicated to a single refrigerant.
Preventing Mixing of Service Equipment
To help avoid the mistake of charging a system with an incorrect, incompatible refrigerant, the compressor fittings are
different for refrigerants R12 and R134A. Systems using R134A have quick couple service connections, while R12
systems use screw threads. This prevents the use of the same tools for different refrigerants, thereby helping to avoid
the mixing of refrigerants in service equipment.
If refrigerants become mixed, the thermodynamic and chemical characteristics will change. This change results in
excessive pressure and poor lubrication and leads to failure of the compressor, desiccant (drier) and other system
components.
Ultimately, system failure and an expensive repair bill will result if refrigerants become mixed in a single set of service
equipment.
REFRIGERANT EXTRACTION AND RECYCLING EQUIPMENT
Both extraction and recycling equipment are in use and available to service technicians. Both types of equipment
will remove the refrigerant from an air conditioning system. However, extraction equipment only pulls the refrigerant
from the air conditioning system and stores it in an appropriate container. Extraction equipment does not clean the
refrigerant. Its only purpose is to recover the refrigerant from an air conditioning system prior to disassembling and
servicing it.
Always recycle or reclaim recovered refrigerant before putting it back into an air conditioning system. During service
operations involving a partial recharge, or while the air conditioning system is in use, refrigerant can pick up moisture,
lubricants, microscopic metal chips, and other potential contaminants. In many cases the contaminants contribute to
or are the primary cause of the system failure. Putting used, unclean refrigerant back into an air conditioning system
may result in poor system performance.
NOTICE: Reuse of unrecycled, unreclaimed refrigerant will void the warranty.
Equipment that removes refrigerant from a mobile air conditioning system (recovery equipment) may allow you to put
the used refrigerant back in the system without first cleaning it to minimize performance. You may also use such con-
ditioning systems. Non-mobile air conditioning systems use refrigerants and contain contaminants that are different
from those in mobile air conditioning systems. Recovery equipment may therefore allow the mixing of different types
of refrigerants or introduce contaminants that may not be removable by recycling equipment available in the service
shop.
If you want to remove, clean and reuse R134A refrigerant, you must use a machine that both extracts and recycles
refrigerant from mobile air conditioning systems. Dedicate that machine to R134a only.
47941906 16/03/2016
7
12. INTRODUCTION
Recycling equipment meeting SAE standards J1990 and J2210 is designed to extract and recycle refrigerants that
have been in mobile air conditioning systems only. R134A refrigerant that also is used in non-mobile systems may
introduce contaminants to the refrigerant that equipment meeting SAE J1990 and J2210 cannot remove. This equip-
ment is not intended for use on non-mobile systems.
Using Extraction Equipment
Extraction equipment is relatively small and easily portable. It is best used if a shop must service vehicles, such as
agricultural or off-highway equipment, that cannot easily be brought into the shop. It is also convenient for shops that
must deal with a variety of different refrigerant types and exchange recovered refrigerant at some central location.
Always use extraction equipment on those refrigerants for which it was designed. The lubricants, hoses, and seals in
this equipment have been designed to work with only one refrigerant.
To help avoid a mix-up of service equipment and refrigerants, equipment hoses designed for use which each refrig-
erant are easily identifiable. New service hoses used with R134A must have a black stripe along the hose length and
carry the designation "SAE J2196/ R134A" (hoses labeled "SAE J 2196" and lacking the black stripe were used for
R12.)
If you use extraction equipment and send your recovered refrigerant to a reclamation facility, reclaimed refrigerant you
purchase must meet the Air Conditioning and Refrigeration Institute standards of purity (ARI Standard 700-88). This
will ensure that the refrigerant you are using not only meets the purity requirements of SAE J1991 (for R12) OR J2099
(for R134A), but also that it does not contain incompatible lubricants or other contaminants from non-automotive air
conditioning systems.
Using Recycling Equipment
Recycling equipment extracts and removes common contaminants from refrigerants. Recycling equipment designed
and certified to meet SAE standards can make refrigerant recovery from mobile air conditioning systems suitable for
reuse in automotive air conditioning systems. Like extraction equipment, SAE standards require that each piece of
recycling equipment be dedicated to a single refrigerant.
NOTICE: Only equipment capable of recovering and cleaning R134A to meet SAE J2099 purity levels carries a label
with the phrase "Design certified by Underwriters" Laboratories, Inc. for compliance with SAE J2099.
The Underwriters' Laboratories label must be specific that the equipment is "design certified" for the SAE J2099 stan-
dard. If not, it certifies only that the machine is free of reasonable shock or other electrical hazards to the user.
Recycling vs. Reclaiming
Recycled refrigerant has been recovered from a mobile air conditioning system and is cleaned by the same shop
that recovered it to meet J2099 for R134A. The equipment designed to recycle refrigerant in the shop environment
removes only contaminants picked up during the operation of a mobile air conditioning system.
Refrigerant that is either properly recycled or reclaimed is adequate for use in mobile air conditioning systems.
47941906 16/03/2016
8
14. Engine - Engine and crankcase
Engine - Remove
Farmall® 40C TIER 4B (FINAL), ROPS NA
Farmall® 50C TIER 4B (FINAL), ROPS NA
1. Chock all four wheels so that the tractor cannot move.
2. Disconnect negative (-) battery cable (1).
NHIL13CT01033AA 1
3. Disconnect headlight wire harness.
4. See Hood - Remove (90.100).
5. Disconnect the main and engine wire harnesses.
6. Turn off fuel supply at the filter (1), and then disconnect
fuel hose.
93102239 2
7. Position a drain pan to collect drain oil and unfasten
clamps (1).
8. Disassemble suction tube assembly (2).
93102240 3
47941906 16/03/2016
10.1 [10.001] / 3
15. Engine - Engine and crankcase
9. Remove the knobs (2) on both rear cover halves (1)
and remove.
93102241 4
10. Remove the mat (1).
11. Remove the M8 nuts and bolts and remove cover (2).
93102242 5
12. Remove the bolts (2) and remove the pedals (1).
93102243 6
13. Remove the seven M8 and one M24 bolts (3).
14. Remove right-hand step (1) and left-hand step (2).
93102244 7
47941906 16/03/2016
10.1 [10.001] / 4
16. Engine - Engine and crankcase
15. Disconnect the front high pressure tube (1).
93102245 8
16. Disconnect steering hoses (2) and tubes (1).
93102246 9
17. Disconnect brake the rod (1), Hydrostatic Transmis-
sion (HST) or gear transmission.
93102247 10
18. Disconnect brake rod (2) on the right-hand side and
clutch rod on the left-hand side; gear transmission
only.
93102248 11
(1) Clutch pedal
47941906 16/03/2016
10.1 [10.001] / 5
17. Engine - Engine and crankcase
1. Disassemble the brake rods linkage (1) and (2) as
shown.
93102250 12
2. Remove bolts (2) securing the frame (1) to the fire wall,
and remove frame.
93102251 13
3. Remove the fire wall (1) with the aid of a hoist.
93102252 14
4. Disconnect and remove the oil cooler (1) and related
parts, as shown in figure 15.
93102253 15
47941906 16/03/2016
10.1 [10.001] / 6
18. Engine - Engine and crankcase
Secure the tractor for separation:
1. Attach a chain sling (2) to the two hoist eyes on the
engine: One located on the left-hand side above the
exhaust manifold, the other on the right-hand side to
the rear of the injector rail.
2. Attach a suitable hoist to the chain sling.
3. Roll a floor jack (1) under the tractor from the rear of
the tractor, and place under the clutch housing. Raise
the jack enough to support the drive train.
93105782 16
4. Remove eight M12 bolts (2) holding the engine (1) and
transmission (3), while checking front wheel drive shaft
for separation from the transmission.
NOTE: The hoist and/or the floor jack may need to be
raised or lowered to allow the separation of the engine from
the clutch housing.
5. Carefully roll the drive train away from the engine, using
the floor jack for support.
93102254 17
93105783 18
47941906 16/03/2016
10.1 [10.001] / 7
19. Engine - Engine and crankcase
Engine - Remove
Farmall® 40C TIER 4B (FINAL), Cab NA
Farmall® 50C TIER 4B (FINAL), Cab NA
NOTICE: Prior to engine removal, the air conditioning system must be evacuated. ( See Air conditioning - Service
instruction - Evacuating the Refrigerant (50.200), and the A/C lines must be disconnected.
1. Chock all four wheels so that the tractor cannot move.
2. Disconnect the negative (-) battery cable (1).
93102237 1
3. Disconnect the headlight wire harness.
4. See Hood - Remove (90.100).
5. Disconnect the main and engine wire harnesses.
6. Turn off fuel supply at the filter (1), and then disconnect
fuel hose.
93102239 2
7. Position a drain pan to collect drain oil and unfasten
clamps (1).
8. Disassemble the suction tube assembly (2).
93102240 3
47941906 16/03/2016
10.1 [10.001] / 8
20. Engine - Engine and crankcase
9. Remove the four knobs (2) on both rear cover halves
(1) and remove.
10. Remove the four screws (3), and remove the lower
panel (4).
NHIL16CT00122AA 4
11. Remove mat (1).
12. Unscrew the M8 nuts and bolts and remove cover (2).
93102242 5
13. Unfasten bolts (2) and remove pedals (1).
93102243 6
14. Remove the seven M8 and one M24 bolts (3).
15. Remove the right-hand step (1) and left-hand step (2).
93102244 7
47941906 16/03/2016
10.1 [10.001] / 9
21. Engine - Engine and crankcase
16. Disconnect the front high pressure tube (1).
93102245 8
17. Disconnect the steering hoses (1) and tubes (2).
93102246 9
18. Disconnect the brake rod (1); Hydrostatic or gear
transmission.
93102247 10
19. Disconnect the brake rod (1) on the right-hand side
and clutch rod on the left-hand side; gear transmission
only.
93102248 11
47941906 16/03/2016
10.1 [10.001] / 10
22. Engine - Engine and crankcase
20. Unfasten bolts (2) securing the frame (1) to the fire-
wall.
21. Remove the frame (2).
93102251 12
22. Use a hoist to carefully remove the firewall (1).
93102252 13
23. Disconnect and remove the oil cooler (1) and related
parts, as shown in figure 14.
93102253 14
24. Attach a chain sling (2) to the two hoist eyes on the
engine.
NOTE: One is located on the left-hand side above the ex-
haust manifold, the other on the right-hand side to the rear
of the injector rail.
25. Attach a suitable hoist to the chain sling and secure
the tractor for separation.
26. Roll a floor jack (1) under the tractor from the rear of
the tractor, and place under the clutch housing. Raise
the jack enough to support the drive train.
93105782 15
47941906 16/03/2016
10.1 [10.001] / 11
23. Engine - Engine and crankcase
27. Unfasten eight M12 bolts (1) holding the engine (3)
and transmission (2), while checking front wheel drive
shaft for separation from the transmission.
NOTE: The hoist and/or the floor jack may need to be
raised or lowered to allow the separation of the engine from
the clutch housing.
28. Use the floor jack for support and carefully roll the
drive train away from the engine.
93102254 16
93105783 17
47941906 16/03/2016
10.1 [10.001] / 12
24. Engine - Engine and crankcase
Engine - Install
Farmall® 40C TIER 4B (FINAL), ROPS NA
Farmall® 50C TIER 4B (FINAL), ROPS NA
1. Roll a floor jack (1) under the tractor from the rear of
the tractor, and place under the clutch housing. Raise
the jack enough to support the drive train.
2. Attach a chain sling (2) to the two hoist eyes on the en-
gine, and position the engine into place on the tractor.
NOTE: The hoist and/or the floor jack may need to be
raised or lowered to allow the engine and clutch housing
to mate.
93105782 1
3. Install eight M12 bolts (1) to secure the engine (3) to
the transmission (2).
93102254 2
93105783 3
4. Install and connect the oil cooler (1) and related parts,
as shown.
93102253 4
47941906 16/03/2016
10.1 [10.001] / 13
25. Engine - Engine and crankcase
5. Use a hoist to carefully install the firewall (1).
93102252 5
6. Position the frame (2) into place.
7. Install the bolts (2) to secure the frame (1) to the fire-
wall.
93102251 6
8. Connect the brake rod (1) on the right-hand side, and
clutch rod to the left-hand side.
NOTE: Gear transmission only.
93102248 7
9. Connect the brake rod (1).
93102247 8
47941906 16/03/2016
10.1 [10.001] / 14
26. Engine - Engine and crankcase
10. Connect the steering hoses (1) and tubes (2).
93102246 9
11. Connect the front high pressure tube (1).
93102245 10
12. Position the right-hand step (1) and left-hand step (2)
into place.
13. Install seven M8 bolts and one M24 bolt (3) to secure
the steps.
93102244 11
14. Install the pedals (1) and secure with bolts (2).
93102243 12
47941906 16/03/2016
10.1 [10.001] / 15
27. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
28. Engine - Engine and crankcase
15. Install the cover (2) and secure with the M8 nuts and
bolts.
16. Install the mat (1).
93102242 13
17. Install the rear cover halves (1) and secure with the
knobs (2).
93102241 14
18. Assemble the suction tube assembly (2) and secure
with the clamps (1).
93102240 15
19. Connect the fuel hose, and then turn on the fuel supply
at the filter (1).
20. Connect the main and engine wire harnesses.
93102239 16
21. See Hood - Install (90.100).
22. Connect the headlight wire harness.
47941906 16/03/2016
10.1 [10.001] / 16
29. Engine - Engine and crankcase
23. Connect the negative (-) battery cable (1).
24. Remove the wheel chocks.
93102237 17
47941906 16/03/2016
10.1 [10.001] / 17
30. Engine - Engine and crankcase
Engine - Install
Farmall® 40C TIER 4B (FINAL), Cab NA
Farmall® 50C TIER 4B (FINAL), Cab NA
1. Roll a floor jack (1) under the tractor from the rear of
the tractor, and place under the clutch housing. Raise
the jack enough to support the drive train.
2. Attach a chain sling (2) to the two hoist eyes on the en-
gine, and position the engine into place on the tractor.
NOTE: The hoist and/or the floor jack may need to be
raised or lowered to allow the engine and clutch housing
to mate.
93105782 1
3. Install eight M12 bolts (1) to secure the engine (3) to
the transmission (2).
93102254 2
93105783 3
4. Install and connect the oil cooler (1) and related parts,
as shown.
93102253 4
47941906 16/03/2016
10.1 [10.001] / 18
31. Engine - Engine and crankcase
5. Use a hoist to carefully install the firewall (1).
93102252 5
6. Position the frame (2) into place.
7. Install the bolts (2) to secure the frame (1) to the fire-
wall.
93102251 6
8. Connect the brake rod (1) on the right-hand side, and
clutch rod to the left-hand side.
NOTE: Gear transmission only.
93102248 7
9. Connect the brake rod (1).
93102247 8
47941906 16/03/2016
10.1 [10.001] / 19
32. Engine - Engine and crankcase
10. Connect the steering hoses (1) and tubes (2).
93102246 9
11. Connect the front high pressure tube (1).
93102245 10
12. Position the right-hand step (1) and left-hand step (2)
into place.
13. Install seven M8 bolts and one M24 bolt (3) to secure
the steps.
93102244 11
14. Install the pedals (1) and secure with bolts (2).
93102243 12
47941906 16/03/2016
10.1 [10.001] / 20
33. Engine - Engine and crankcase
15. Install the cover (2) and secure with the M8 nuts and
bolts.
16. Install the mat (1).
93102242 13
17. Install the four screws (3), and secure the lower panel
(4).
18. Install the four knobs (2) on both rear cover halves (1).
NHIL16CT00122AA 14
19. Assemble the suction tube assembly (2) and secure it
with the clamps (1).
NHIL14CT00485FA 15
20. Connect the fuel hose, and then turn on the fuel supply
at the filter (1).
21. Connect the main and engine wire harnesses.
22. Hood - Install (90.100).
23. Connect the headlight wire harness.
93102239 16
47941906 16/03/2016
10.1 [10.001] / 21