This document provides an introduction and overview for the service manual for Case IH 3152 and 3162 draper headers. It outlines important safety information, environmental guidelines, product identification details, and general specifications for the flex and rigid header models. Torque specifications and basic service instructions are also included.
New holland tj325 tractor service repair manualufjkskemsem
- This document contains safety information and warnings for operating machinery.
- Operators should read the entire manual and all safety signs on the machine before operating.
- When servicing machinery, always turn off the engine, set the parking brake, remove the key and block the wheels before working on the machine.
- Wear proper safety equipment like a hard hat, safety shoes, gloves, eye protection and reflective clothing when operating machinery.
Massey ferguson mf 363 lx tractor service parts catalogue manual (part number...ufjkskemsem
This document contains parts listings and descriptions for the engine of a Massey Ferguson 363 LX tractor. It includes 6 pages detailing over 80 individual engine parts grouped into assemblies like the cylinder block, crankshaft, pistons, cylinder head, and others. Each part lists properties like part number, quantity, description, and additional comments clarifying usage or replacement parts. The level of technical detail provided is aimed at mechanics and part suppliers for maintenance and repair of this tractor engine model.
Massey ferguson mf 353 lx tractor service parts catalogue manual (part number...ufjkskemsem
The document provides parts lists and technical specifications for repairing and replacing components of a Massey Ferguson 353 LX tractor engine. It includes lists of parts needed for the engine assembly, cylinder block, crankshaft and connecting rods, cylinder head, and other engine systems. Each part is accompanied by details like part numbers, quantities, replacement parts, and technical specifications.
Massey ferguson mf 350 tractor service parts catalogue manual (part number 8...ufjkskemsem
This document provides parts information for a Massey Ferguson 350 tractor engine. It includes 4 pages of documentation with diagrams and lists of parts, part numbers, quantities and descriptions for the engine block, cylinder head, crankshaft, pistons, connecting rods and other engine components. Over 100 individual parts are detailed across the 4 pages of documentation.
The document is a parts catalog for a Massey Ferguson 6711 tractor. It contains 24 pages of detailed parts listings for various systems of the tractor, including the engine, axles, steering, brakes, hydraulics, electrical, cab, chassis, and implements. Each page lists the relevant part numbers, quantities, descriptions, and any additional comments for a specific subsystem. The parts are organized in item number order for each section.
Massey ferguson 6499 tractor (tier 3) ( -- t197077) service parts catalogue m...ufjkskemsem
This document provides parts information for a Massey Ferguson 6499 Tier 3 tractor with the serial number 3906159, including:
1. Details on the engine, alternator, starter, cylinder block, timing gear housing, crankshaft, pistons, and connecting rods.
2. Lists 27 items related to the cylinder block, 22 items for the timing gear housing, and 20 items for the crankshaft, pistons, and connecting rods along with part numbers and quantities.
3. Includes notes on part numbers, quantities, and specifications for many of the listed parts.
Massey ferguson 6140 tractor service parts catalogue manual (part number 163...ufjkskemsem
This document provides parts information for the engine of a Massey Ferguson 6140 tractor with serial number 1637275. It includes 42 line items with part numbers, quantities, descriptions and other details for the engine block, cylinder head, crankshaft, pistons, connecting rods and other engine components. It also includes references to other documents for additional part information.
Massey ferguson 6120 tractor service parts catalogue manual (part number 163...ufjkskemsem
This document provides parts information for the engine of a Massey Ferguson 6120 tractor with serial number 1637273. It includes:
1. A list of 32 parts for the engine and their descriptions.
2. A list of 28 parts for the cylinder block and their descriptions.
3. A list of 23 parts for the crankshaft, pistons, and connecting rods and their descriptions.
New holland tj325 tractor service repair manualufjkskemsem
- This document contains safety information and warnings for operating machinery.
- Operators should read the entire manual and all safety signs on the machine before operating.
- When servicing machinery, always turn off the engine, set the parking brake, remove the key and block the wheels before working on the machine.
- Wear proper safety equipment like a hard hat, safety shoes, gloves, eye protection and reflective clothing when operating machinery.
Massey ferguson mf 363 lx tractor service parts catalogue manual (part number...ufjkskemsem
This document contains parts listings and descriptions for the engine of a Massey Ferguson 363 LX tractor. It includes 6 pages detailing over 80 individual engine parts grouped into assemblies like the cylinder block, crankshaft, pistons, cylinder head, and others. Each part lists properties like part number, quantity, description, and additional comments clarifying usage or replacement parts. The level of technical detail provided is aimed at mechanics and part suppliers for maintenance and repair of this tractor engine model.
Massey ferguson mf 353 lx tractor service parts catalogue manual (part number...ufjkskemsem
The document provides parts lists and technical specifications for repairing and replacing components of a Massey Ferguson 353 LX tractor engine. It includes lists of parts needed for the engine assembly, cylinder block, crankshaft and connecting rods, cylinder head, and other engine systems. Each part is accompanied by details like part numbers, quantities, replacement parts, and technical specifications.
Massey ferguson mf 350 tractor service parts catalogue manual (part number 8...ufjkskemsem
This document provides parts information for a Massey Ferguson 350 tractor engine. It includes 4 pages of documentation with diagrams and lists of parts, part numbers, quantities and descriptions for the engine block, cylinder head, crankshaft, pistons, connecting rods and other engine components. Over 100 individual parts are detailed across the 4 pages of documentation.
The document is a parts catalog for a Massey Ferguson 6711 tractor. It contains 24 pages of detailed parts listings for various systems of the tractor, including the engine, axles, steering, brakes, hydraulics, electrical, cab, chassis, and implements. Each page lists the relevant part numbers, quantities, descriptions, and any additional comments for a specific subsystem. The parts are organized in item number order for each section.
Massey ferguson 6499 tractor (tier 3) ( -- t197077) service parts catalogue m...ufjkskemsem
This document provides parts information for a Massey Ferguson 6499 Tier 3 tractor with the serial number 3906159, including:
1. Details on the engine, alternator, starter, cylinder block, timing gear housing, crankshaft, pistons, and connecting rods.
2. Lists 27 items related to the cylinder block, 22 items for the timing gear housing, and 20 items for the crankshaft, pistons, and connecting rods along with part numbers and quantities.
3. Includes notes on part numbers, quantities, and specifications for many of the listed parts.
Massey ferguson 6140 tractor service parts catalogue manual (part number 163...ufjkskemsem
This document provides parts information for the engine of a Massey Ferguson 6140 tractor with serial number 1637275. It includes 42 line items with part numbers, quantities, descriptions and other details for the engine block, cylinder head, crankshaft, pistons, connecting rods and other engine components. It also includes references to other documents for additional part information.
Massey ferguson 6120 tractor service parts catalogue manual (part number 163...ufjkskemsem
This document provides parts information for the engine of a Massey Ferguson 6120 tractor with serial number 1637273. It includes:
1. A list of 32 parts for the engine and their descriptions.
2. A list of 28 parts for the cylinder block and their descriptions.
3. A list of 23 parts for the crankshaft, pistons, and connecting rods and their descriptions.
Massey ferguson 5613 tractor (dyna 6) (e023046 g307020) service parts catal...ufjkskemsem
This document provides a table of contents and parts list for a Massey Ferguson 5613 tractor. The table of contents lists 24 sections that provide information on various tractor systems and components. The parts list documents 33 individual parts that make up the engine assemblies for the tractor, including descriptions and part numbers.
Massey ferguson 5612 tractor (dyna 6) (d295023 g165048) service parts catal...ufjkskemsem
The document is a table of contents for the service manual of a Massey Ferguson 5612 tractor. It lists 24 sections that make up the manual, including the engine, axles, steering system, drive train, brakes, hydraulics, electrical system, cab, chassis, decals, wheels, and implements. Each section includes multiple sub-pages providing part numbers, descriptions and other technical details for servicing and repairing components of the tractor.
John deere power tech e 3.0l diesel engines service repair technical manual (...ufjkskemsem
The document provides instructions for removing and installing various components of PowerTech E 2.4L and 3.0L diesel engines, including the flywheel, flywheel ring gear, flywheel housing, balancer shafts, and measuring main bearing cap clearances. The removal instructions list necessary special tools and safety precautions for each component. Installation sections specify torque specifications and use of thread locking compounds.
1. The document provides instructions for disassembling and reassembling the carrier roller of an excavator model EL240.
2. The disassembly instructions describe cleaning parts and removing components like seals, bolts, and bushings. The reassembly instructions describe installing components in reverse order and applying lubricants like engine oil and threadlock.
3. Maintenance standards are provided for wear limits, repair welding procedures, and storage of items for up to 12 months.
1. The document provides instructions for disassembling and reassembling the carrier roller of an excavator model EL240.
2. The disassembly instructions describe cleaning parts and removing components like seals, bolts, and bushings. The reassembly instructions describe installing components in reverse order and applying lubricants like engine oil.
3. Maintenance standards are provided for wear limits, repair welding procedures, and storage of items for up to 12 months.
Caterpillar cat d8 t track type tractor dozer bulldozer (prefix mb8) service ...ufjkskemsem
This document provides instructions for removing and installing the final drive on a D8T track-type tractor. The removal procedure involves using lifting devices and tools to detach various components of the final drive including the planetary carrier, sprocket hub, and reaction hub. These components are then disassembled further by removing shafts, gears, seals, and bearings. The assembly procedure reverses these steps, noting to clean and lubricate parts, carefully install seals using specialty tools, and tighten fasteners to the specified torques.
Caterpillar cat d8 t track type tractor dozer bulldozer (prefix fct) service ...ufjkskemsem
The document provides instructions for removing and installing various components of a Caterpillar D8T track-type tractor engine. It describes removing the front cover by removing tube assemblies, button head screws, nuts and spacers. It then explains installing the front cover by reversing the removal steps and applying thread lock to the studs. It also describes removing the gear group on the front of the engine by using a driver group after removing the front housing, air compressor and water pump. Workers are warned not to turn the crankshaft or camshaft while the camshaft gear is removed to prevent interference.
Caterpillar cat 320 f l excavator (prefix nhd) service repair manual (nhd0000...ufjkskemsem
This document provides instructions for disassembling and assembling the travel motor of a 320F L excavator. The disassembly procedure involves 27 steps to remove components such as the head, fittings, brake piston, barrel assembly, and shaft. The assembly procedure describes 30 steps including installing seals, plates, springs, and reassembling components in reverse order using alignment marks and applying lubricants. Precautions are outlined to avoid damage and ensure correct assembly of parts like the cam plate.
Caterpillar cat 320 e l excavator (prefix wbk) service repair manual (wbk0000...ufjkskemsem
This document provides instructions for removing and installing a flywheel housing on a Caterpillar C6.6 engine. It describes two procedures: one for a standard housing and one for a wet back-end housing. The standard procedure involves removing bolts to detach the housing from the cylinder block. Dowels and seals must also be inspected or installed. The wet back-end procedure is similar but notes that a seal is not used with this housing on a standard engine. Precise torques are specified for bolts depending on their grade. Alignment of the housing must be checked after installation.
Caterpillar cat 320 e l excavator (prefix tnj) service repair manual (tnj0000...ufjkskemsem
The document provides instructions for removing and installing inlet and exhaust valves on a Caterpillar C6.6 engine. The procedure involves using specialized tools to compress the valve springs, remove the keepers and other parts, and then reverse the process for installation. Safety precautions are outlined to prevent injury from the force of compressed springs. A second section provides similar instructions for removing and installing the engine oil filter base.
Caterpillar cat 320 c ln excavator (prefix dbg) service repair manual (dbg000...ufjkskemsem
This document provides instructions for servicing components of Caterpillar 320C excavator engines, including removing and installing the crankshaft front seal, flywheel, and flywheel housing. The procedures describe using various tools to remove parts like the crankshaft seal and installing replacement parts while taking precautions to contain fluids and prevent contamination.
Caterpillar cat 320 c l excavator (prefix dbg) service repair manual (dbg0000...ufjkskemsem
This document provides instructions for removing and installing a crankshaft pulley on excavator models 320C, 320C L, and 320C LN. It outlines the required tools and steps to remove the V-belts, nut, washer, and pulley using a combination puller. It also describes cleaning parts and installing a new pulley by reversing the removal steps. Proper torque is required for reinstallation.
Caterpillar cat 320 c excavator (prefix dbg) service repair manual (dbg00001 ...ufjkskemsem
This document provides instructions for servicing components of Caterpillar 320C excavator engines, including removing and installing the crankshaft front seal, flywheel, and flywheel housing. The procedures describe using various tools to remove parts like the crankshaft seal and installing replacement parts while taking precautions to contain fluids and prevent contamination.
Caterpillar cat 259 d compact track loader (prefix ftk) service repair manual...ufjkskemsem
This document provides instructions for removing and installing a camshaft gear and removing and installing an engine oil pan on a 259D compact track loader. It describes using various tools to remove the camshaft gear from the camshaft and removing bolts to take off the oil pan. It then explains installing the camshaft gear and oil pan in reverse order while applying sealant. Proper draining and filling procedures are noted.
Caterpillar cat 248 b skid steer loader (prefix scl) service repair manual (s...ufjkskemsem
This document provides instructions for removing and installing inlet and exhaust valves on a 248B skid steer loader with a 3044C engine. It outlines the required tools and safety precautions. The procedure involves removing the cylinder head, indexing the valves, compressing the springs, and removing the retainers and springs to access the valves. Installation follows the reverse order, lubricating the valves and ensuring proper spring compression and retainer installation. Valve depths are checked after installation and seats replaced if needed.
Caterpillar cat 246 c skid steer loader (prefix jay) service repair manual (j...ufjkskemsem
This document provides instructions for removing and installing inlet and exhaust valve springs on a 246C Skid Steer Loader with a 3044C engine. It describes the required tools and multi-step process, which involves using air pressure to hold the valves in place while removing and installing the springs one at a time. Proper tooling and procedures are emphasized to safely compress the springs and prevent injury from parts propelled by the spring force.
Case quantum 80 f tractor service repair manual (pin zflk00441 and above)ufjkskemsem
This document is a service manual for Quantum tractor models 80F-110F and 80CL-110CL. It contains information on engine systems, transmission, axles, hydraulics, electrical systems, and other components. The manual instructs technicians to only perform repairs listed using proper tools and procedures, and warns that unauthorized repairs could damage equipment. It provides overviews and part numbers for servicing various tractor systems.
Case quantum 80 cl tractor service repair manual (pin zflk00441 and above)ufjkskemsem
This document is a service manual for Quantum tractor models 80F-110F and 80CL-110CL. It contains information on engine systems, transmission, axles, hydraulics, electrical systems, and other components. The manual instructs technicians to only perform repairs listed using proper tools and procedures, and warns that unauthorized repairs could damage equipment. It provides overviews of components and part numbers to support tractor servicing.
Case ih wd1204 tier 3 self propelled windrower service repair manual [ -yfg67...ufjkskemsem
This document is a service manual for a WD1204 Tier 3 self-propelled windrower with part number 47904537. The manual contains sections covering the engine, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, steering, cab climate control, electrical systems, and the platform, cab, bodywork, and decals. Safety rules are outlined at the beginning, including warnings regarding slopes, unauthorized riders, impaired operation, overhead hazards, and moving parts.
Case ih titan 4530 floater service repair manualufjkskemsem
This service manual provides information on servicing and repairing the Titan 3030, Titan 3530, Titan 4030, and Titan 4530 agricultural equipment. It covers the hydraulic, pneumatic, electrical, and electronic systems, as well as the engine, transmission, axles, brakes, steering, frame, and other components. Torque specifications are provided for decimal, metric, and hydraulic fittings.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Massey ferguson 5613 tractor (dyna 6) (e023046 g307020) service parts catal...ufjkskemsem
This document provides a table of contents and parts list for a Massey Ferguson 5613 tractor. The table of contents lists 24 sections that provide information on various tractor systems and components. The parts list documents 33 individual parts that make up the engine assemblies for the tractor, including descriptions and part numbers.
Massey ferguson 5612 tractor (dyna 6) (d295023 g165048) service parts catal...ufjkskemsem
The document is a table of contents for the service manual of a Massey Ferguson 5612 tractor. It lists 24 sections that make up the manual, including the engine, axles, steering system, drive train, brakes, hydraulics, electrical system, cab, chassis, decals, wheels, and implements. Each section includes multiple sub-pages providing part numbers, descriptions and other technical details for servicing and repairing components of the tractor.
John deere power tech e 3.0l diesel engines service repair technical manual (...ufjkskemsem
The document provides instructions for removing and installing various components of PowerTech E 2.4L and 3.0L diesel engines, including the flywheel, flywheel ring gear, flywheel housing, balancer shafts, and measuring main bearing cap clearances. The removal instructions list necessary special tools and safety precautions for each component. Installation sections specify torque specifications and use of thread locking compounds.
1. The document provides instructions for disassembling and reassembling the carrier roller of an excavator model EL240.
2. The disassembly instructions describe cleaning parts and removing components like seals, bolts, and bushings. The reassembly instructions describe installing components in reverse order and applying lubricants like engine oil and threadlock.
3. Maintenance standards are provided for wear limits, repair welding procedures, and storage of items for up to 12 months.
1. The document provides instructions for disassembling and reassembling the carrier roller of an excavator model EL240.
2. The disassembly instructions describe cleaning parts and removing components like seals, bolts, and bushings. The reassembly instructions describe installing components in reverse order and applying lubricants like engine oil.
3. Maintenance standards are provided for wear limits, repair welding procedures, and storage of items for up to 12 months.
Caterpillar cat d8 t track type tractor dozer bulldozer (prefix mb8) service ...ufjkskemsem
This document provides instructions for removing and installing the final drive on a D8T track-type tractor. The removal procedure involves using lifting devices and tools to detach various components of the final drive including the planetary carrier, sprocket hub, and reaction hub. These components are then disassembled further by removing shafts, gears, seals, and bearings. The assembly procedure reverses these steps, noting to clean and lubricate parts, carefully install seals using specialty tools, and tighten fasteners to the specified torques.
Caterpillar cat d8 t track type tractor dozer bulldozer (prefix fct) service ...ufjkskemsem
The document provides instructions for removing and installing various components of a Caterpillar D8T track-type tractor engine. It describes removing the front cover by removing tube assemblies, button head screws, nuts and spacers. It then explains installing the front cover by reversing the removal steps and applying thread lock to the studs. It also describes removing the gear group on the front of the engine by using a driver group after removing the front housing, air compressor and water pump. Workers are warned not to turn the crankshaft or camshaft while the camshaft gear is removed to prevent interference.
Caterpillar cat 320 f l excavator (prefix nhd) service repair manual (nhd0000...ufjkskemsem
This document provides instructions for disassembling and assembling the travel motor of a 320F L excavator. The disassembly procedure involves 27 steps to remove components such as the head, fittings, brake piston, barrel assembly, and shaft. The assembly procedure describes 30 steps including installing seals, plates, springs, and reassembling components in reverse order using alignment marks and applying lubricants. Precautions are outlined to avoid damage and ensure correct assembly of parts like the cam plate.
Caterpillar cat 320 e l excavator (prefix wbk) service repair manual (wbk0000...ufjkskemsem
This document provides instructions for removing and installing a flywheel housing on a Caterpillar C6.6 engine. It describes two procedures: one for a standard housing and one for a wet back-end housing. The standard procedure involves removing bolts to detach the housing from the cylinder block. Dowels and seals must also be inspected or installed. The wet back-end procedure is similar but notes that a seal is not used with this housing on a standard engine. Precise torques are specified for bolts depending on their grade. Alignment of the housing must be checked after installation.
Caterpillar cat 320 e l excavator (prefix tnj) service repair manual (tnj0000...ufjkskemsem
The document provides instructions for removing and installing inlet and exhaust valves on a Caterpillar C6.6 engine. The procedure involves using specialized tools to compress the valve springs, remove the keepers and other parts, and then reverse the process for installation. Safety precautions are outlined to prevent injury from the force of compressed springs. A second section provides similar instructions for removing and installing the engine oil filter base.
Caterpillar cat 320 c ln excavator (prefix dbg) service repair manual (dbg000...ufjkskemsem
This document provides instructions for servicing components of Caterpillar 320C excavator engines, including removing and installing the crankshaft front seal, flywheel, and flywheel housing. The procedures describe using various tools to remove parts like the crankshaft seal and installing replacement parts while taking precautions to contain fluids and prevent contamination.
Caterpillar cat 320 c l excavator (prefix dbg) service repair manual (dbg0000...ufjkskemsem
This document provides instructions for removing and installing a crankshaft pulley on excavator models 320C, 320C L, and 320C LN. It outlines the required tools and steps to remove the V-belts, nut, washer, and pulley using a combination puller. It also describes cleaning parts and installing a new pulley by reversing the removal steps. Proper torque is required for reinstallation.
Caterpillar cat 320 c excavator (prefix dbg) service repair manual (dbg00001 ...ufjkskemsem
This document provides instructions for servicing components of Caterpillar 320C excavator engines, including removing and installing the crankshaft front seal, flywheel, and flywheel housing. The procedures describe using various tools to remove parts like the crankshaft seal and installing replacement parts while taking precautions to contain fluids and prevent contamination.
Caterpillar cat 259 d compact track loader (prefix ftk) service repair manual...ufjkskemsem
This document provides instructions for removing and installing a camshaft gear and removing and installing an engine oil pan on a 259D compact track loader. It describes using various tools to remove the camshaft gear from the camshaft and removing bolts to take off the oil pan. It then explains installing the camshaft gear and oil pan in reverse order while applying sealant. Proper draining and filling procedures are noted.
Caterpillar cat 248 b skid steer loader (prefix scl) service repair manual (s...ufjkskemsem
This document provides instructions for removing and installing inlet and exhaust valves on a 248B skid steer loader with a 3044C engine. It outlines the required tools and safety precautions. The procedure involves removing the cylinder head, indexing the valves, compressing the springs, and removing the retainers and springs to access the valves. Installation follows the reverse order, lubricating the valves and ensuring proper spring compression and retainer installation. Valve depths are checked after installation and seats replaced if needed.
Caterpillar cat 246 c skid steer loader (prefix jay) service repair manual (j...ufjkskemsem
This document provides instructions for removing and installing inlet and exhaust valve springs on a 246C Skid Steer Loader with a 3044C engine. It describes the required tools and multi-step process, which involves using air pressure to hold the valves in place while removing and installing the springs one at a time. Proper tooling and procedures are emphasized to safely compress the springs and prevent injury from parts propelled by the spring force.
Case quantum 80 f tractor service repair manual (pin zflk00441 and above)ufjkskemsem
This document is a service manual for Quantum tractor models 80F-110F and 80CL-110CL. It contains information on engine systems, transmission, axles, hydraulics, electrical systems, and other components. The manual instructs technicians to only perform repairs listed using proper tools and procedures, and warns that unauthorized repairs could damage equipment. It provides overviews and part numbers for servicing various tractor systems.
Case quantum 80 cl tractor service repair manual (pin zflk00441 and above)ufjkskemsem
This document is a service manual for Quantum tractor models 80F-110F and 80CL-110CL. It contains information on engine systems, transmission, axles, hydraulics, electrical systems, and other components. The manual instructs technicians to only perform repairs listed using proper tools and procedures, and warns that unauthorized repairs could damage equipment. It provides overviews of components and part numbers to support tractor servicing.
Case ih wd1204 tier 3 self propelled windrower service repair manual [ -yfg67...ufjkskemsem
This document is a service manual for a WD1204 Tier 3 self-propelled windrower with part number 47904537. The manual contains sections covering the engine, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, steering, cab climate control, electrical systems, and the platform, cab, bodywork, and decals. Safety rules are outlined at the beginning, including warnings regarding slopes, unauthorized riders, impaired operation, overhead hazards, and moving parts.
Case ih titan 4530 floater service repair manualufjkskemsem
This service manual provides information on servicing and repairing the Titan 3030, Titan 3530, Titan 4030, and Titan 4530 agricultural equipment. It covers the hydraulic, pneumatic, electrical, and electronic systems, as well as the engine, transmission, axles, brakes, steering, frame, and other components. Torque specifications are provided for decimal, metric, and hydraulic fittings.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
6. Contents
INTRODUCTION
Foreword - Important notice regarding equipment servicing (*) ................................ 3
Safety rules - Ecology and the environment (*) ................................................. 4
Safety rules (*) .................................................................................. 5
Safety rules - Personal safety (*) ............................................................... 6
Power Take-Off (PTO) shaft - Safety rules - Power Take-Off (PTO) (*) ......................... 7
Transport locking assembly Cylinder stop - Safety rules - Lift cylinder safety locks (*) ......... 8
Safety signs (*) ................................................................................ 10
Torque - Minimum tightening torques for normal assembly (*) ............................... 21
Torque - Standard torque data for hydraulics (*) .............................................. 26
Basic instructions - Shop and assembly (*) ................................................... 28
Basic instructions - Chain wear tables - Roller chains (*) ..................................... 30
General specification - General welding (*) ................................................... 32
General specification Machine specifications - Flex headers (*) ............................. 33
General specification Machine specifications - Rigid headers (*) ............................ 35
Capacities (*) ................................................................................. 37
Product identification (*) ...................................................................... 39
Machine orientation - Machine orientation .................................................... 40
(*) See content for specific models
48144004 08/05/2017
2
7. INTRODUCTION
Foreword - Important notice regarding equipment servicing
3152
3162
All repair and maintenance work listed in this manual must be carried out only by qualified dealership personnel,
strictly complying with the instructions given, and using, whenever possible, the special tools.
Anyone who performs repair and maintenance operations without complying with the procedures provided herein
shall be responsible for any subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional, or
local dealers, reject any responsibility for damages caused by parts and/or components not approved by the manu-
facturer, including those used for the servicing or repair of the product manufactured or marketed by the manufacturer.
In any case, no warranty is given or attributed on the product manufactured or marketed by the manufacturer in case
of damages caused by parts and/or components not approved by the manufacturer.
The manufacturer reserves the right to make improvements in design and changes in specifications at any time without
notice and without incurring any obligation to install them on units previously sold. Specifications, descriptions, and
illustrative material herein are as accurate as known at time of publication but are subject to change without notice.
In case of questions, refer to your CASE IH Sales and Service Networks.
48144004 08/05/2017
3
8. INTRODUCTION
Safety rules - Ecology and the environment
3152
3162
Soil, air, and water quality is important for all industries and life in general. When legislation does not yet rule the
treatment of some of the substances that advanced technology requires, sound judgment should govern the use and
disposal of products of a chemical and petrochemical nature.
Familiarize yourself with the relative legislation applicable to your country, and make sure that you understand this
legislation. Where no legislation exists, obtain information from suppliers of oils, filters, batteries, fuels, anti-freeze,
cleaning agents, etc., with regard to the effect of these substances on man and nature and how to safely store, use,
and dispose of these substances.
Helpful hints
• Avoid the use of cans or other inappropriate pressurized fuel delivery systems to fill tanks. Such delivery systems
may cause considerable spillage.
• In general, avoid skin contact with all fuels, oils, acids, solvents, etc. Most of these products contain substances
that may be harmful to your health.
• Modern oils contain additives. Do not burn contaminated fuels and or waste oils in ordinary heating systems.
• Avoid spillage when you drain fluids such as used engine coolant mixtures, engine oil, hydraulic fluid, brake fluid,
etc. Do not mix drained brake fluids or fuels with lubricants. Store all drained fluids safely until you can dispose of
the fluids in a proper way that complies with all local legislation and available resources.
• Do not allow coolant mixtures to get into the soil. Collect and dispose of coolant mixtures properly.
• The air-conditioning system contains gases that should not be released into the atmosphere. Consult an air-condi-
tioning specialist or use a special extractor to recharge the system properly.
• Repair any leaks or defects in the engine cooling system or hydraulic system immediately.
• Do not increase the pressure in a pressurized circuit as this may lead to a component failure.
• Protect hoses during welding. Penetrating weld splatter may burn a hole or weaken hoses, allowing the loss of oils,
coolant, etc.
Battery recycling
Batteries and electric accumulators contain several substances that can have a harmful
effect on the environment if the batteries are not properly recycled after use. Improper
disposal of batteries can contaminate the soil, groundwater, and waterways. CASE IH
strongly recommends that you return all used batteries to a CASE IH dealer, who will
dispose of the used batteries or recycle the used batteries properly. In some countries,
this is a legal requirement.
Mandatory battery recycling
NOTE: The following requirements are mandatory in Brazil.
Batteries are made of lead plates and a sulfuric acid solution. Because batteries contain heavy metals such as lead,
CONAMA Resolution 401/2008 requires you to return all used batteries to the battery dealer when you replace any
batteries. Do not dispose of batteries in your household garbage.
Points of sale are obliged to:
• Accept the return of your used batteries
• Store the returned batteries in a suitable location
• Send the returned batteries to the battery manufacturer for recycling
48144004 08/05/2017
4
9. INTRODUCTION
Safety rules
3152
3162
Personal safety
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible death or injury.
Throughout this manual you will find the signal words DANGER, WARNING, and CAUTION followed by special in-
structions. These precautions are intended for the personal safety of you and those working with you.
Read and understand all the safety messages in this manual before you operate or service the machine.
DANGER indicates a hazardous situation that, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
FAILURE TO FOLLOW DANGER, WARNING, AND CAUTION MESSAGES COULD RESULT
IN DEATH OR SERIOUS INJURY.
Machine safety
NOTICE: Notice indicates a situation that, if not avoided, could result in machine or property damage.
Throughout this manual you will find the signal word Notice followed by special instructions to prevent machine or
property damage. The word Notice is used to address practices not related to personal safety.
Information
NOTE: Note indicates additional information that clarifies steps, procedures, or other information in this manual.
Throughout this manual you will find the word Note followed by additional information about a step, procedure, or
other information in the manual. The word Note is not intended to address personal safety or property damage.
48144004 08/05/2017
5
10. INTRODUCTION
Safety rules - Personal safety
3152
3162
Carefully study these precautions, and those included in the external attachment operators
manual, and insist that they be followed by those working with and for you.
1. Thoroughly read and understand this manual and the attachment Operator’s Manual before operating this or any
other equipment.
2. Be sure all people and pets are clear of the machine before starting. Sound the horn, if equipped, three times
before starting engine.
3. Only the operator should be on the machine when in operation. Never allow anyone to climb on to the machine
while it is in motion. If the machine is equipped with an Instructors Seat, this must only be used for training
purposes. Passengers must not be allowed to use the Instructors Seat.
4. Keep all shields in place. Never work around the machine or any of the attachments while wearing loose clothing
that might catch on moving parts.
5. Observe the following precautions whenever lubricating the machine or making adjustments.
• Disengage all clutching levers or switches.
• Lower the attachment, if equipped, to the ground or raise the attachment completely and engage the cylinder
safety locks. Completing these actions will prevent the attachment from lowering unexpectedly.
• Engage the parking brake.
• Shut off the engine and remove the key.
• Wait for all machine movement to stop before leaving the operators platform.
6. Always keep the machine in gear while travelling downhill.
7. The machine should always be equipped with sufficient front or rear axle weight for safe operation.
8. Under some field conditions, more weight may be required at the front or rear axle for adequate stability. This is
especially important when operating in hilly conditions or/when using heavy attachments.
9. Always lower the attachment, shut off the engine, set the parking brake, engage the transmission gears, remove
the key and wait for all machine movement to stop before leaving the operators platform.
10. If the attachment or machine should become obstructed or plugged; set the parking brake, shut off the engine
and remove the key, engage the transmission gears, wait for all machine or attachment motion to come to a stop,
before leaving the operators platform to removing the obstruction or plug.
11. Never disconnect or make any adjustments to the hydraulic system unless the machine and/or the attachment is
lowered to the ground or the safety lock(s) is in the engaged position.
12. Use of the flashing lights is highly recommended when operating on a public road.
13. When transporting on a road or highway, use accessory lights and devices for adequate warning to the opera-
tors of other vehicles. In this regard, check local government regulations. Various safety lights and devices are
available from your CASE IH dealer.
14. Practice safety 365 days a year.
15. Keep all your equipment in safe operating condition.
16. Keep all guards and safety devices in place.
17. Always set the parking brake, shut off the engine and remove the key, engage the transmission gears, wait for all
machine or attachment motion to come to a stop, before leaving the operators platform to service the machine
and attachment.
18. Remember: A careful operator is the best insurance against an accident.
19. Extreme care should be taken in keeping hands and clothing away from moving parts.
48144004 08/05/2017
6
11. INTRODUCTION
Power Take-Off (PTO) shaft - Safety rules - Power Take-Off (PTO)
3152
3162
WARNING
Avoid injury! Always do the following before lubricating, maintaining, or servicing the machine.
1. Disengage all drives.
2. Engage parking brake.
3. Lower all attachments to the ground, or raise and engage all safety locks.
4. Shut off engine.
5. Remove key from key switch.
6. Switch off battery key, if installed.
7. Wait for all machine movement to stop.
Failure to comply could result in death or serious injury.
W0047A
The Power Take-Off (PTO) shaft on your header is
equipped with a drive shaft shield (1) and chains. The
shields protect the operator from the PTO shaft while the
shaft is rotating. The shield chains prevent the shield
from rotating while the PTO shaft is connected to the
combine and turning.
83112562 1
The rear PTO shaft, that connects to the combine, right-
hand side chain (1) is attached to a loop in the adapter.
Connect the left hand shield chain to the hole provided in
the steel PTO slip clutch shield.
83118612 2
The front PTO shaft, that drives the auger, right-hand side
chain (1) hooks to hole in backsheet (2).
Left side chain (4) hooks to hole in backsheet (3).
83112562A 3
48144004 08/05/2017
7
12. INTRODUCTION
Transport locking assembly Cylinder stop - Safety rules - Lift
cylinder safety locks
3152
3162
WARNING
Crushing hazard!
ALWAYS make sure the work area is clear of bystanders and domestic animals before raising or low-
ering the equipment.
Failure to comply could result in death or serious injury.
W0123A
Your CASE IH header is equipped with reel lift cylinder
locks (1).
NOTE: The header must be connected to the combine for
operation.
To engage the lift cylinder locks:
1. Use your combine’s reel lift switch to raise the reel
completely.
2. Lift the lock from its storage holder (2).
83112567 1
Left-hand side
83112568 2
Right-hand side
48144004 08/05/2017
8
13. INTRODUCTION
3. Swing the lock (1) down over the cylinder shaft.
83114725 1 3
Left-hand side
83117559 4
Center, split reel equipped only
83112595 5
Right-hand side
To store the locks:
1. If the reel has settled so that the locks are against
the cylinders;
• Raise the reel to it's highest point.
2. Raise the lock from the cylinder and place it in on the
storage hanger (1).
3. Lower the reel to the desired height.
83114726 6
48144004 08/05/2017
9
14. INTRODUCTION
Safety signs
3152 Rigid draper header (40 ft), export [YHH051300 - ]
3152 Rigid draper header (45 ft) [YHH051300 - ]
3152 Rigid draper header (45 ft), export [YHH051300 - ]
3152 Rigid draper header (25 ft) [YHH051300 - ]
3152 Rigid draper header (30 ft) [YHH051300 - ]
3152 Rigid draper header (35 ft) [YHH051300 - ]
3152 Rigid draper header (40 ft) [YHH051300 - ]
3152 [YHH051300 - ] ANZ --- APAC --- MEA --- NA --- WE ---
3162 Flex draper header (25 ft) [YHH051300 - ]
3162 Flex draper header (30 ft) [YHH051300 - ]
3162 Flex draper header (35 ft) [YHH051300 - ]
3162 Flex draper header (40 ft) [YHH051300 - ]
3162 Flex draper header (40 ft), export [YHH051300 - ]
3162 Flex draper header (45 ft) [YHH051300 - ]
3162 Flex draper header (45 ft), export [YHH051300 - ]
3162 [YHH051300 - ] ANZ --- APAC --- MEA --- WE ---
The following safety signs are placed on your machine as a guide for your safety and for those working with you. Walk
around the machine and note the content and location of these safety signs before operating your machine.
Keep safety signs clean and legible. Clean safety signs with a soft cloth, water, and a gentle detergent. Do not use
solvent, gasoline, or other harsh chemicals. Solvents, gasoline, and other harsh chemicals may damage or remove
safety signs.
Replace all safety signs that are damaged, missing, painted over, or illegible. If a safety sign is on a part that is
replaced, make sure the safety sign is installed on the new part. See your dealer for replacement safety signs.
Safety signs that display the “Read Operator’s Manual” symbol are intended to direct
the operator to the operator’s manual for further information regarding maintenance,
adjustments, or procedures for particular areas of the machine. When a safety sign
displays this symbol, refer to the appropriate page of the operator’s manual.
83112557 1
Rear view
48144004 08/05/2017
10
15. INTRODUCTION
NHIL16GH00436AA 2 NHIL16GH00437AA 3
Left - hand side Right - hand side
WARNING
Slippery surface.
Do not use this area as a step or platform.
Failure to comply could result in death or serious
injury.
Quantity: 2
87026533
87026533_B 4
(4) Left-Hand (LH) side of feeder opening on the top rail.
93112558 5
(7) Right-Hand (RH) side of feeder opening on the top
rail.
93112558 6
48144004 08/05/2017
11
16. INTRODUCTION
WARNING
Crush Hazard.
Engage safety latch before working under machine.
Failure to comply could cause death or serious
injury.
Quantity: 2
84027712
87027712 7
(9) RH side feeder opening.
83112566 8
(11) LH side feeder opening.
83112563 9
48144004 08/05/2017
12
17. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
18. INTRODUCTION
WARNING
Shield is missing.
Stand clear.
Replace or close shield before operating machine.
Failure to comply could cause death or serious
injury.
Quantity: 1
86999254
86999254 10
(15) LH side feeder opening.
83112561 11
48144004 08/05/2017
13
19. INTRODUCTION
DANGER
Rotating drive line.
Keep all shields and guards in place.
Failure to comply will result in death or serious
injury.
Quantity: 2
86520062
86520062_B 12
(2) On the Power Take-Off (PTO) PTO shaft cover.
83112562 13
(12) On the PTO shaft cover.
83112562 14
48144004 08/05/2017
14
20. INTRODUCTION
CAUTION
Stay clear of hot surface.
Failure to do so could result in minor or moderate
injury.
Quantity: 2
84004742
84004742 15
(3) On the hydraulic reservoir.
NHIL12GH00272AA 16
(8) On the hydraulic reservoir.
NHIL12GH00273AA 17
48144004 08/05/2017
15