1. Drain engine oil, coolant, and remove engine hood and pump
2. Remove retaining screws and bracket holding engine
3. Remove fan guard, fan guide rubber, and radiator hoses
4. Remove compressor lines and intercooler hose
5. Remove undercover and drain engine oil by removing hoses
6. Prepare to lift engine out once all connections are removed
Case cx290 b crawler excavator service repair manualfujjsekfkksekm
Be sure to stop the engine before beginning work.
14
15
SF11004-010
16
17
SF11004-011
[16]Remove the bolts (18), and then remove the engine
mounting bracket (19).
[17]Remove the bolts (20), and then remove the engine
mounting bracket (21).
[18]Remove the bolts (22), and then remove the engine
mounting bracket (23).
18
19
SF11004-012
20
21
SF11004-013
22
23
SF11004-014
Lep SM290B2000-0EN Issued 01-
Case cx290 b crawler excavator service repair manualfujsjefkskemm
This document provides the table of contents for a service manual for a CX290B crawler excavator. It lists 9 divisions that cover topics like the engine, fuel system, electrical system, undercarriage, drive train, hydraulics, and more. Safety information, general repair instructions, and torque specifications are provided in section 1001. The manual contains information to guide technicians in repairs, maintenance, and inspections of the excavator's various components.
Case cx700 b crawler excavator service repair manualjfjkskekemm
Drain the coolant and remove the engine hood, alternator belt, pump, steps, frame, under cover, radiator hoses, compressor lines, intercooler hose, and engine oil remote hoses. Prepare to drain the engine oil. Disconnect all wiring, hoses and lines connected to the engine. Use lifting equipment such as an overhead crane to remove the engine from the machine.
Case cx700 b crawler excavator service repair manualfdjjjsekkskemm
This document is the service manual table of contents for a CX700B crawler excavator. It lists 9 divisions that cover topics like the engine, fuel system, electrical system, undercarriage, drive train, hydraulics, and the upperstructure. Each division contains multiple sections that provide removal and installation instructions for components, along with disassembly/assembly procedures and specifications. Reference numbers are provided for each section.
Case cx700 b crawler excavator service repair manualfjjskekfsem
Here are the steps to remove the engine:
[1] Drain the coolant from the radiator.
[2] Remove the engine hood, alternator belt and pump.
[3] Use a wrench to remove bolts and the step.
[4] Use a wrench to remove bolts and the frame.
[5] Use a wrench to remove bolts and the under cover.
[6] Use a wrench to loosen hose bands and remove radiator hoses.
[7] Use a wrench to loosen line bolts and remove compressor lines.
[8] Use a wrench to loosen hose band and remove
Case cx470 b crawler excavator service repair manualeudskkejedmm
This document provides specifications and maintenance requirements for a Crawler Excavator CX470B, including:
- Machine and engine serial numbers and year of manufacture
- Recommended fluids and lubricants for hydraulic systems, transmissions, grease, engine oil, fuel, and coolant
- Specifications for main dimensions, engine details, cooling system capacities, and air conditioning
- Maintenance schedules for hydraulic oil filters and fuel filters
CASE CX290B Crawler Excavator service repair manualFranklin Martinez
This document provides specifications and torque settings for a CX290B crawler excavator, including information on machine serial numbers and year of manufacture, recommended fluids and lubricants for the engine, transmission, hydraulics and other components, and environmental guidelines. Fluid specifications are given for hydraulic fluid, transmission oil, grease, engine oil, and anti-freeze. Safety and maintenance procedures are also outlined.
Case cx130 crawler excavator service repair manualhfjsjekfksmem
This document provides specifications and torque settings for an excavator. It includes information on fluid types, engine specifications, hydraulic and electrical systems, dimensions of undercarriage components, and wear limits of tracks and attachment joints. Serial numbers and fluid capacities are listed. Standard torque values are provided along with some special settings. Dimensions for tracks, rollers, and idler wheels are given along with wear limits. Dimensions and wear limits are also specified for attachment joints like the boom foot and cylinder heads.
Case cx290 b crawler excavator service repair manualfujjsekfkksekm
Be sure to stop the engine before beginning work.
14
15
SF11004-010
16
17
SF11004-011
[16]Remove the bolts (18), and then remove the engine
mounting bracket (19).
[17]Remove the bolts (20), and then remove the engine
mounting bracket (21).
[18]Remove the bolts (22), and then remove the engine
mounting bracket (23).
18
19
SF11004-012
20
21
SF11004-013
22
23
SF11004-014
Lep SM290B2000-0EN Issued 01-
Case cx290 b crawler excavator service repair manualfujsjefkskemm
This document provides the table of contents for a service manual for a CX290B crawler excavator. It lists 9 divisions that cover topics like the engine, fuel system, electrical system, undercarriage, drive train, hydraulics, and more. Safety information, general repair instructions, and torque specifications are provided in section 1001. The manual contains information to guide technicians in repairs, maintenance, and inspections of the excavator's various components.
Case cx700 b crawler excavator service repair manualjfjkskekemm
Drain the coolant and remove the engine hood, alternator belt, pump, steps, frame, under cover, radiator hoses, compressor lines, intercooler hose, and engine oil remote hoses. Prepare to drain the engine oil. Disconnect all wiring, hoses and lines connected to the engine. Use lifting equipment such as an overhead crane to remove the engine from the machine.
Case cx700 b crawler excavator service repair manualfdjjjsekkskemm
This document is the service manual table of contents for a CX700B crawler excavator. It lists 9 divisions that cover topics like the engine, fuel system, electrical system, undercarriage, drive train, hydraulics, and the upperstructure. Each division contains multiple sections that provide removal and installation instructions for components, along with disassembly/assembly procedures and specifications. Reference numbers are provided for each section.
Case cx700 b crawler excavator service repair manualfjjskekfsem
Here are the steps to remove the engine:
[1] Drain the coolant from the radiator.
[2] Remove the engine hood, alternator belt and pump.
[3] Use a wrench to remove bolts and the step.
[4] Use a wrench to remove bolts and the frame.
[5] Use a wrench to remove bolts and the under cover.
[6] Use a wrench to loosen hose bands and remove radiator hoses.
[7] Use a wrench to loosen line bolts and remove compressor lines.
[8] Use a wrench to loosen hose band and remove
Case cx470 b crawler excavator service repair manualeudskkejedmm
This document provides specifications and maintenance requirements for a Crawler Excavator CX470B, including:
- Machine and engine serial numbers and year of manufacture
- Recommended fluids and lubricants for hydraulic systems, transmissions, grease, engine oil, fuel, and coolant
- Specifications for main dimensions, engine details, cooling system capacities, and air conditioning
- Maintenance schedules for hydraulic oil filters and fuel filters
CASE CX290B Crawler Excavator service repair manualFranklin Martinez
This document provides specifications and torque settings for a CX290B crawler excavator, including information on machine serial numbers and year of manufacture, recommended fluids and lubricants for the engine, transmission, hydraulics and other components, and environmental guidelines. Fluid specifications are given for hydraulic fluid, transmission oil, grease, engine oil, and anti-freeze. Safety and maintenance procedures are also outlined.
Case cx130 crawler excavator service repair manualhfjsjekfksmem
This document provides specifications and torque settings for an excavator. It includes information on fluid types, engine specifications, hydraulic and electrical systems, dimensions of undercarriage components, and wear limits of tracks and attachment joints. Serial numbers and fluid capacities are listed. Standard torque values are provided along with some special settings. Dimensions for tracks, rollers, and idler wheels are given along with wear limits. Dimensions and wear limits are also specified for attachment joints like the boom foot and cylinder heads.
Case cx130 crawler excavator service repair manualfusjefjjskekmem
This document provides specifications and torque settings for an excavator. It includes information on fluid types, engine specifications, hydraulic and electrical systems, dimensions of undercarriage components, and wear limits of tracks and attachment joints. Serial numbers and manufacturing information for the machine and engine are also listed. Special torque settings are provided where standard torque values from other documents may not apply.
Case cx130 crawler excavator service repair manual instant downloadufdjjskekfkskem
This document provides safety, general information and standard torque specifications for CNH excavators. It outlines cleaning and inspection procedures for parts and contains warnings about safety precautions that must be followed to prevent injury. Standard torque values are provided for cap screws and nuts used on CNH excavators.
Case cx130 crawler excavator service repair manualjfjkskefksmem
This document provides specifications and dimensions for an excavator model. It includes information on serial numbers, recommended fluids, capacities, electrical and hydraulic systems, undercarriage components, attachment dimensions, and wear limits. Torque values are given for proper tightening of fasteners. The specifications are intended to ensure correct maintenance and repair of the excavator.
Case cx330 crawler excavator service repair manualfjskekxswesemm
This document provides the table of contents and general safety information for an excavator service manual. It lists the sections and subsections of the manual, including information on the engine, fuel system, electrical system, undercarriage, drive train, hydraulics, and the upperstructure. The document emphasizes the importance of following safety procedures and instructions when servicing equipment. It provides warnings to read all safety information, clear the work area of people, and learn how to properly operate controls before using the excavator.
Case cx350 crawler excavator service repair manualfjskeksemm
This document provides the table of contents and general safety information for service manuals on Case CX330 and CX350 crawler excavators. It lists the sections and reference numbers for the service manuals. The sections cover topics like the engine, fuel system, electrical system, undercarriage, drive train, hydraulics, and the upperstructure. The document provides general guidance on cleaning, inspection, bearings, gears, seals, shafts, lubrication, and safety when servicing the excavators.
Case cx460 crawler excavator service repair manualfjjskekfsem
This document provides the table of contents for a service manual for a CX460 Crawler Excavator. The manual is divided into 9 sections covering general information, the engine, fuel system, electrical system, undercarriage, drive train, undercarriage hydraulics, upperstructure hydraulics, and the upperstructure. It lists over 80 subsections with reference numbers for troubleshooting, removal and installation instructions, disassembly and assembly instructions, and specifications for various components and systems of the excavator. Safety warnings are provided at the beginning regarding operating the machine safely and following manufacturers' instructions.
CASE WX218 Wheeled Excavator Service Repair Manual.pdffujkskemdmd
1. The document is a service manual that provides instructions for servicing various components of a Wheeled Excavator, including the engine, transmission, hydraulics, electrical systems, and more.
2. It includes sections on removing, installing, and replacing parts like air intake lines, air cleaner supports, and fuel filters. Detailed steps and torque specifications are provided.
3. Safety warnings are provided throughout instructing technicians to follow proper safety procedures and switch off the engine before working on it.
CASE IH FARMALL 115U EP Tractor With 16x16 Semi-Powershift Transmission Servi...fujkskemdmd
This service manual provides information for servicing the Farmall 105U EP and 115U EP tractors with 16x16 semi-powershift transmissions. It includes specifications, removal and installation procedures, and repair information for the engine, transmission, axles, hydraulics, electrical systems, and other components. The document is organized by system with sections covering the engine, transmission, drivetrain, brakes, hydraulics and more. Technical details, part numbers, fluid types and capacities are provided.
CASE IH FARMALL 105U EP Tractor With 16x16 Semi-Powershift Transmission Servi...fujkskemdmd
This service manual provides information for servicing the Farmall 105U EP and 115U EP tractors with 16x16 semi-powershift transmissions. It includes specifications, removal and installation procedures, and repair information for the engine, transmission, axles, hydraulics, electrical systems, and other components. The document is organized by system with sections covering the engine, transmission, drivetrain, brakes, hydraulics and more. Technical details, part numbers, fluid types and capacities are provided.
CASE IH FARMALL 105U Tractor Service Repair Manual.pdffujkskemdmd
This document is a repair manual that provides instructions and safety information for servicing Farmall 85U, 95U, and 105U tractors. It contains over 50 sections covering all major tractor systems. Section 00 provides general safety guidelines and instructions for working on the tractors, including proper use of tools and precautions for handling hazardous materials that may be encountered during repairs.
CASE IH FARMALL 95U Tractor Service Repair Manual.pdffujkskemdmd
This document is a repair manual that provides instructions and safety information for servicing Farmall 85U, 95U, and 105U tractors. It contains over 50 sections covering all major tractor systems. Section 00 provides general safety guidelines and instructions for working on the tractors, including proper use of tools and precautions for handling hazardous materials that may be encountered during repairs.
CASE IH FARMALL 75C Efficient Power Tractor Service Repair Manual (PIN ZDAL00...fujkskemdmd
This document is a service manual for the Case IH Farmall 75C tractor. It contains sections covering the engine, clutch, transmission, front and rear axles, power take-off, brakes, hydraulics, hitches, steering, wheels, cab climate control, electrical systems, front loader, platform, and safety regulations. The manual provides information on maintenance and repair of components.
CASE IH FARMALL 85U Tractor Service Repair Manual.pdffujkskemdmd
This document is a repair manual that provides instructions and safety information for servicing Farmall 85U, 95U, and 105U tractors. It contains over 50 sections covering all major tractor systems. Section 00 provides general safety guidelines and instructions for working on the tractors, including proper use of tools and precautions for handling hazardous materials that may be encountered during repairs.
STEYR 4095 Tractor Service Repair Manual.pdffujkskemdmd
This document is a service manual that provides specifications and repair instructions for tractors models 4086, 4095, and 4105. It contains sections covering the engine, clutch, transmission, axles, power take-off, brakes, hydraulics, hitches, steering, wheels, cab climate control, electrical systems, front loader, platform and bodywork. The document includes an introduction on safety regulations for working on equipment.
STEYR 4105 Tractor Service Repair Manual.pdffujkskemdmd
This document is a service manual that provides specifications and repair instructions for tractors models 4086, 4095, and 4105. It contains sections covering the engine, clutch, transmission, axles, power take-off, brakes, hydraulics, hitches, steering, wheels, cab climate control, electrical systems, front loader, platform and bodywork. The document includes an introduction on safety regulations for working on equipment.
STEYR 4110 PROFI Classic Tractor Service Repair Manual.pdffujkskemdmd
The document is a service manual that provides information on hydraulic, pneumatic, electrical, and electronic systems for tractor models 4110 PROFI Classic, 4110 PROFI, 4120 PROFI, 4130 PROFI, 6115 PROFI, 6125 PROFI Classic, 6125 PROFI, 6140 PROFI Classic, and 6140 PROFI. It includes sections on primary and secondary hydraulic power systems, hydraulic command systems, electrical power systems, electronic systems, fault codes, engines, transmissions, axles, frames, and crop processing. Special tools are also listed.
STEYR 4130 PROFI Tractor Service Repair Manual.pdffujkskemdmd
The document is a service manual that provides information on hydraulic, pneumatic, electrical, and electronic systems for tractor models 4110 PROFI Classic, 4110 PROFI, 4120 PROFI, 4130 PROFI, 6115 PROFI, 6125 PROFI Classic, 6125 PROFI, 6140 PROFI Classic, and 6140 PROFI. It includes sections on primary and secondary hydraulic power systems, hydraulic command systems, electrical power systems, electronic systems, fault codes, engines, transmissions, axles, frames, and crop processing. Special tools are also listed.
STEYR 6115 PROFI Tractor Service Repair Manual.pdffujkskemdmd
The document is a service manual that provides information on hydraulic, pneumatic, electrical, and electronic systems for tractor models 4110 PROFI Classic, 4110 PROFI, 4120 PROFI, 4130 PROFI, 6115 PROFI, 6125 PROFI Classic, 6125 PROFI, 6140 PROFI Classic, and 6140 PROFI. It includes sections on primary and secondary hydraulic power systems, hydraulic command systems, electrical power systems, electronic systems, fault codes, engines, transmissions, axles, frames, and crop processing. Special tools are also listed.
STEYR 6125 PROFI Classic Tractor Service Repair Manual.pdffujkskemdmd
The document is a service manual that provides information on hydraulic, pneumatic, electrical, and electronic systems for tractor models 4110 PROFI Classic, 4110 PROFI, 4120 PROFI, 4130 PROFI, 6115 PROFI, 6125 PROFI Classic, 6125 PROFI, 6140 PROFI Classic, and 6140 PROFI. It includes sections on primary and secondary hydraulic power systems, hydraulic command systems, electrical power systems, electronic systems, fault codes, engines, transmissions, axles, frames, and crop processing. Special tools are also listed.
STEYR CVT 6205 Tractor Service Repair Manual.pdffujkskemdmd
This document is a service manual for tractor models CVT 6170, CVT 6185, CVT 6205, CVT 6215, and CVT 6230. It contains sections on the engine, transmission, front and rear axle systems, power take-off, brakes, hydraulics, pneumatics, hitches and couplings, frames, steering, wheels, cab climate control, and electrical systems. Each section provides technical data, functional descriptions, diagnostics, and service procedures for the components.
STEYR CVT 6215 Tractor Service Repair Manual.pdffujkskemdmd
This document is a service manual for tractor models CVT 6170, CVT 6185, CVT 6205, CVT 6215, and CVT 6230. It contains sections on the engine, transmission, front and rear axle systems, power take-off, brakes, hydraulics, pneumatics, hitches and couplings, frames, steering, wheels, cab climate control, and electrical systems. Each section provides technical data, functional descriptions, diagnostics, and service procedures for the components of each system.
STEYR CVT 6230 Tractor Service Repair Manual.pdffujkskemdmd
This document is a service manual for tractor models CVT 6170, CVT 6185, CVT 6205, CVT 6215, and CVT 6230. It contains sections on the engine, transmission, front and rear axle systems, power take-off, brakes, hydraulics, pneumatics, hitches and couplings, frames, steering, wheels, cab climate control, and electrical systems. Each section provides technical data, functional descriptions, diagnostics, and service procedures for the components.
More Related Content
Similar to CASE CX290B Crawler Excavator Service Repair Manual.pdf
Case cx130 crawler excavator service repair manualfusjefjjskekmem
This document provides specifications and torque settings for an excavator. It includes information on fluid types, engine specifications, hydraulic and electrical systems, dimensions of undercarriage components, and wear limits of tracks and attachment joints. Serial numbers and manufacturing information for the machine and engine are also listed. Special torque settings are provided where standard torque values from other documents may not apply.
Case cx130 crawler excavator service repair manual instant downloadufdjjskekfkskem
This document provides safety, general information and standard torque specifications for CNH excavators. It outlines cleaning and inspection procedures for parts and contains warnings about safety precautions that must be followed to prevent injury. Standard torque values are provided for cap screws and nuts used on CNH excavators.
Case cx130 crawler excavator service repair manualjfjkskefksmem
This document provides specifications and dimensions for an excavator model. It includes information on serial numbers, recommended fluids, capacities, electrical and hydraulic systems, undercarriage components, attachment dimensions, and wear limits. Torque values are given for proper tightening of fasteners. The specifications are intended to ensure correct maintenance and repair of the excavator.
Case cx330 crawler excavator service repair manualfjskekxswesemm
This document provides the table of contents and general safety information for an excavator service manual. It lists the sections and subsections of the manual, including information on the engine, fuel system, electrical system, undercarriage, drive train, hydraulics, and the upperstructure. The document emphasizes the importance of following safety procedures and instructions when servicing equipment. It provides warnings to read all safety information, clear the work area of people, and learn how to properly operate controls before using the excavator.
Case cx350 crawler excavator service repair manualfjskeksemm
This document provides the table of contents and general safety information for service manuals on Case CX330 and CX350 crawler excavators. It lists the sections and reference numbers for the service manuals. The sections cover topics like the engine, fuel system, electrical system, undercarriage, drive train, hydraulics, and the upperstructure. The document provides general guidance on cleaning, inspection, bearings, gears, seals, shafts, lubrication, and safety when servicing the excavators.
Case cx460 crawler excavator service repair manualfjjskekfsem
This document provides the table of contents for a service manual for a CX460 Crawler Excavator. The manual is divided into 9 sections covering general information, the engine, fuel system, electrical system, undercarriage, drive train, undercarriage hydraulics, upperstructure hydraulics, and the upperstructure. It lists over 80 subsections with reference numbers for troubleshooting, removal and installation instructions, disassembly and assembly instructions, and specifications for various components and systems of the excavator. Safety warnings are provided at the beginning regarding operating the machine safely and following manufacturers' instructions.
Similar to CASE CX290B Crawler Excavator Service Repair Manual.pdf (6)
CASE WX218 Wheeled Excavator Service Repair Manual.pdffujkskemdmd
1. The document is a service manual that provides instructions for servicing various components of a Wheeled Excavator, including the engine, transmission, hydraulics, electrical systems, and more.
2. It includes sections on removing, installing, and replacing parts like air intake lines, air cleaner supports, and fuel filters. Detailed steps and torque specifications are provided.
3. Safety warnings are provided throughout instructing technicians to follow proper safety procedures and switch off the engine before working on it.
CASE IH FARMALL 115U EP Tractor With 16x16 Semi-Powershift Transmission Servi...fujkskemdmd
This service manual provides information for servicing the Farmall 105U EP and 115U EP tractors with 16x16 semi-powershift transmissions. It includes specifications, removal and installation procedures, and repair information for the engine, transmission, axles, hydraulics, electrical systems, and other components. The document is organized by system with sections covering the engine, transmission, drivetrain, brakes, hydraulics and more. Technical details, part numbers, fluid types and capacities are provided.
CASE IH FARMALL 105U EP Tractor With 16x16 Semi-Powershift Transmission Servi...fujkskemdmd
This service manual provides information for servicing the Farmall 105U EP and 115U EP tractors with 16x16 semi-powershift transmissions. It includes specifications, removal and installation procedures, and repair information for the engine, transmission, axles, hydraulics, electrical systems, and other components. The document is organized by system with sections covering the engine, transmission, drivetrain, brakes, hydraulics and more. Technical details, part numbers, fluid types and capacities are provided.
CASE IH FARMALL 105U Tractor Service Repair Manual.pdffujkskemdmd
This document is a repair manual that provides instructions and safety information for servicing Farmall 85U, 95U, and 105U tractors. It contains over 50 sections covering all major tractor systems. Section 00 provides general safety guidelines and instructions for working on the tractors, including proper use of tools and precautions for handling hazardous materials that may be encountered during repairs.
CASE IH FARMALL 95U Tractor Service Repair Manual.pdffujkskemdmd
This document is a repair manual that provides instructions and safety information for servicing Farmall 85U, 95U, and 105U tractors. It contains over 50 sections covering all major tractor systems. Section 00 provides general safety guidelines and instructions for working on the tractors, including proper use of tools and precautions for handling hazardous materials that may be encountered during repairs.
CASE IH FARMALL 75C Efficient Power Tractor Service Repair Manual (PIN ZDAL00...fujkskemdmd
This document is a service manual for the Case IH Farmall 75C tractor. It contains sections covering the engine, clutch, transmission, front and rear axles, power take-off, brakes, hydraulics, hitches, steering, wheels, cab climate control, electrical systems, front loader, platform, and safety regulations. The manual provides information on maintenance and repair of components.
CASE IH FARMALL 85U Tractor Service Repair Manual.pdffujkskemdmd
This document is a repair manual that provides instructions and safety information for servicing Farmall 85U, 95U, and 105U tractors. It contains over 50 sections covering all major tractor systems. Section 00 provides general safety guidelines and instructions for working on the tractors, including proper use of tools and precautions for handling hazardous materials that may be encountered during repairs.
STEYR 4095 Tractor Service Repair Manual.pdffujkskemdmd
This document is a service manual that provides specifications and repair instructions for tractors models 4086, 4095, and 4105. It contains sections covering the engine, clutch, transmission, axles, power take-off, brakes, hydraulics, hitches, steering, wheels, cab climate control, electrical systems, front loader, platform and bodywork. The document includes an introduction on safety regulations for working on equipment.
STEYR 4105 Tractor Service Repair Manual.pdffujkskemdmd
This document is a service manual that provides specifications and repair instructions for tractors models 4086, 4095, and 4105. It contains sections covering the engine, clutch, transmission, axles, power take-off, brakes, hydraulics, hitches, steering, wheels, cab climate control, electrical systems, front loader, platform and bodywork. The document includes an introduction on safety regulations for working on equipment.
STEYR 4110 PROFI Classic Tractor Service Repair Manual.pdffujkskemdmd
The document is a service manual that provides information on hydraulic, pneumatic, electrical, and electronic systems for tractor models 4110 PROFI Classic, 4110 PROFI, 4120 PROFI, 4130 PROFI, 6115 PROFI, 6125 PROFI Classic, 6125 PROFI, 6140 PROFI Classic, and 6140 PROFI. It includes sections on primary and secondary hydraulic power systems, hydraulic command systems, electrical power systems, electronic systems, fault codes, engines, transmissions, axles, frames, and crop processing. Special tools are also listed.
STEYR 4130 PROFI Tractor Service Repair Manual.pdffujkskemdmd
The document is a service manual that provides information on hydraulic, pneumatic, electrical, and electronic systems for tractor models 4110 PROFI Classic, 4110 PROFI, 4120 PROFI, 4130 PROFI, 6115 PROFI, 6125 PROFI Classic, 6125 PROFI, 6140 PROFI Classic, and 6140 PROFI. It includes sections on primary and secondary hydraulic power systems, hydraulic command systems, electrical power systems, electronic systems, fault codes, engines, transmissions, axles, frames, and crop processing. Special tools are also listed.
STEYR 6115 PROFI Tractor Service Repair Manual.pdffujkskemdmd
The document is a service manual that provides information on hydraulic, pneumatic, electrical, and electronic systems for tractor models 4110 PROFI Classic, 4110 PROFI, 4120 PROFI, 4130 PROFI, 6115 PROFI, 6125 PROFI Classic, 6125 PROFI, 6140 PROFI Classic, and 6140 PROFI. It includes sections on primary and secondary hydraulic power systems, hydraulic command systems, electrical power systems, electronic systems, fault codes, engines, transmissions, axles, frames, and crop processing. Special tools are also listed.
STEYR 6125 PROFI Classic Tractor Service Repair Manual.pdffujkskemdmd
The document is a service manual that provides information on hydraulic, pneumatic, electrical, and electronic systems for tractor models 4110 PROFI Classic, 4110 PROFI, 4120 PROFI, 4130 PROFI, 6115 PROFI, 6125 PROFI Classic, 6125 PROFI, 6140 PROFI Classic, and 6140 PROFI. It includes sections on primary and secondary hydraulic power systems, hydraulic command systems, electrical power systems, electronic systems, fault codes, engines, transmissions, axles, frames, and crop processing. Special tools are also listed.
STEYR CVT 6205 Tractor Service Repair Manual.pdffujkskemdmd
This document is a service manual for tractor models CVT 6170, CVT 6185, CVT 6205, CVT 6215, and CVT 6230. It contains sections on the engine, transmission, front and rear axle systems, power take-off, brakes, hydraulics, pneumatics, hitches and couplings, frames, steering, wheels, cab climate control, and electrical systems. Each section provides technical data, functional descriptions, diagnostics, and service procedures for the components.
STEYR CVT 6215 Tractor Service Repair Manual.pdffujkskemdmd
This document is a service manual for tractor models CVT 6170, CVT 6185, CVT 6205, CVT 6215, and CVT 6230. It contains sections on the engine, transmission, front and rear axle systems, power take-off, brakes, hydraulics, pneumatics, hitches and couplings, frames, steering, wheels, cab climate control, and electrical systems. Each section provides technical data, functional descriptions, diagnostics, and service procedures for the components of each system.
STEYR CVT 6230 Tractor Service Repair Manual.pdffujkskemdmd
This document is a service manual for tractor models CVT 6170, CVT 6185, CVT 6205, CVT 6215, and CVT 6230. It contains sections on the engine, transmission, front and rear axle systems, power take-off, brakes, hydraulics, pneumatics, hitches and couplings, frames, steering, wheels, cab climate control, and electrical systems. Each section provides technical data, functional descriptions, diagnostics, and service procedures for the components.
STEYR M9086 Tractor Service Repair Manual.pdffujkskemdmd
This document is a table of contents for service and training manuals for various tractor models from CNH Österreich GmbH. It lists sections covering the engine, fuel system, electrical systems, steering system, transmission, and hydraulic system. The table provides publication numbers for workshop manuals, how-to guides, circuit diagrams, and troubleshooting documents for components from 2002 onwards.
STEYR M9094 Tractor Service Repair Manual.pdffujkskemdmd
This document is a table of contents for service and training manuals for various tractor models from CNH Österreich GmbH. It lists sections covering the engine, fuel system, electrical systems, steering system, transmission, and hydraulic system. The table provides publication numbers for workshop manuals, how-to guides, circuit diagrams, and troubleshooting documents for components from the engine to the electronic front hitch control system, for tractors from 2002 through models with serial numbers past DBD0057135.
STEYR M9078 Tractor Service Repair Manual.pdffujkskemdmd
This document is a table of contents for service and training manuals for various tractor models from CNH Österreich GmbH. It lists sections covering the engine, fuel system, electrical systems, steering system, transmission, and hydraulic system. The table provides publication numbers for workshop manuals, how-to guides, circuit diagrams, and troubleshooting documents for components from 2002 onwards.
STEYR CVT 6170 Tractor Service Repair Manual.pdffujkskemdmd
This document is a service manual for tractor models CVT 6170, CVT 6185, CVT 6205, CVT 6215, and CVT 6230. It contains sections on the engine, transmission, front and rear axle systems, power take-off, brakes, hydraulics, pneumatics, hitches and couplings, frames, steering, wheels, cab climate control, and electrical systems. Each section provides technical data, functional descriptions, diagnostics, and service procedures for the components of each system.
Kalyan chart DP boss guessing matka results➑➌➋➑➒➎➑➑➊➍
8328958814Satta Matka is a number-based game. There are several markets, each with its owner responsible for releasing the lottery satta Matka market results on time. Kalyan market, Worli market, main Mumbai market, Rajdhani market, and Milan market are some of the main markets or bazaars involved in the satta Matka game. The oldest and most legitimate markets are in Kalyan and Main Mumbai. Every Satta Market has an open and close time. The satta results for these markets are published on or shortly after the open and close times. During the open result, two numbers are decoded, one of which is a three-digit number and the other a single-digit number. Similarly, three-digit and single-digit numbers are declared during the satta market's close. The last digit after adding the three digits of the open or close result is usually the single digit declared during the open and close results.KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAINSATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSSdp boss net, dp satta, dpboss dpboss, indian satta matka, kalyan matkà result today , matka boss, matka result live, matka satta result today, satamatka com, satta boss, satta matka king, sattamatkà, sattamatkà result, sattamatta com, sattmatka sattmatka, star matka, tara matka, tara satta matka, worli matka, indian matka, matka live, kalyan guessing, satta fix, kalyan final ank, dp matka, dpboss net, sata mata com, सट्टा मटका, sattamatkà 143, golden matka, satta matta matka 143, satta fast, kalyan open, satta 143, dpboss 143 guessing, dpboss satta, golden satta matka, satta bajar
Satta Matka Market is India's leading website providing the quickest sattamatka outcome, experienced in Satta Matka game. Our services include free Satta Matka Trick and Tips for Kalyan Matka and Disawar Satta King, as well as satta matka graphs, online play, tips and more. Our team of experts strive to help you recoup your losses quickly through our proposals such as Free Satta Matka Tips and Kalyan Bazar Tips. We are known as India's best Matka DpBoss portal site, here to deliver updates on all sorts of Satta Market like Kalyan Bazar, Milan, Rajdhani, Time Bazaar, Main and the most current charts. Stay tuned with us for more live updates on the Satta market
car rentals in nassau bahamas | atv rental nassau bahamasjustinwilson0857
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
Khushmeet Khushi Resume of manufacturing industry Khushmeet Khushi
A result oriented professional working for Process and New Technology of Manufacturing industry presently associated with Manufacturing Industry as
Asst. Manager in Research & Development. Skilled in manufacturing Process of various type of cords, cables, connector, wire Harness, Remote Control devices, Switches including backward integration thereof. Acquired knowledge of New product and process development, QMS, Compliance and product certification, IPQC, Product & process Stranded, Lean Manufacturing Methodology, and problem solving methodology, VAVE, Etc.
Top-Quality AC Service for Mini Cooper Optimal Cooling PerformanceMotor Haus
Ensure your Mini Cooper stays cool and comfortable with our top-quality AC service. Our expert technicians provide comprehensive maintenance, repairs, and performance optimization, guaranteeing reliable cooling and peak efficiency. Trust us for quick, professional service that keeps your Mini Cooper's air conditioning system in top condition, ensuring a pleasant driving experience year-round.
Automotive Engine Valve Manufacturing Plant Project Report.pptxSmith Anderson
The report provides a complete roadmap for setting up an Automotive Engine Valve. It covers a comprehensive market overview to micro-level information such as unit operations involved, raw material requirements, utility requirements, infrastructure requirements, machinery and technology requirements, manpower requirements, packaging requirements, transportation requirements, etc.
The semiochemicals market size has grown rapidly in
recent years. It will grow from $4.56 billion in 2023
to $5.37 billion in 2024 at a compound annual
growth rate (CAGR) of 17.6%. The growth in the
historic period can be attributed to market
acceptance and education, pest resistance concerns,
increased agricultural productivity demands,
chemical ecology research, growing advancements in
formulations. The semiochemicals market size is
expected to see rapid growth in the next few years. It
will grow to $9.67 billion in 2028 at a compound
annual growth rate (CAGR) of 15.9%.
2. Lep SM290BTOC-1EN Issued 01-2010
DIVISION/SECTION SECTION N° REFERENCE N°
8 UPPERSTRUCTURE HYDRAULICS
Specifications, troubleshooting, checks and
hydraulic pressure settings..........................................................................8001 SC290B8001-0EN
Removal and installation of the hydraulic reservoir .........................................8002 SM290B8002-0EN
Removal and installation of the main hydraulic pump......................................8003 SM350B8003-0EN
Removal and installation of the main hydraulic control valve...........................8004 SM290B8004-0EN
Removal and installation of the attachment cylinders......................................8005 SM350B8005-0EN
Removal and installation of the hydraulic swivel..............................................8006 SM290B8006-0EN
Removal and installation of the pilot blocs.......................................................8007 SM290B8007-0EN
Disassembly and assembly of the main hydraulic pump .................................8010 SM290B8010-0EN
Disassembly and assembly of the main hydraulic control valve ......................8011 SM350B8011-0EN
Disassembly and assembly of the attachment cylinders .................................8012 SM130B8012-0EN
Disassembly and assembly of the hand control levers ....................................8013 SM130B8013-0EN
Disassembly and assembly of the foot control levers ......................................8014 SM160B8014-0EN
Disassembly and assembly of the cushion valve.............................................8016 SM290B8016-0EN
Removal and installation of the safety valve....................................................8017 SM350B8017-0EN
Disassembly and assembly of the hydraulic swivel .........................................8018 SM290B8018-0EN
Disassembly and assembly of the swing motor ...............................................8019 SM290B8019-0EN
Hydraulic functions ..........................................................................................8020 SC290B8020-0EN
Hydraulic component functions........................................................................8030 SC290B8030-0EN
9 UPPERSTRUCTURE
Removal and installation of the counterweight ................................................9002 SM290B9002-0EN
Removal and installation of the boom, dipper and bucket ...............................9003 SM350B9003-0EN
Removal and installation of the seat................................................................9004 SM130B9004-0EN
Removal and installation of the cab and cab equipment .................................9005 SM130B9005-0EN
Air conditioner functions and troubleshooting..................................................9006 SC210B9006-3EN
Air conditioning unit .........................................................................................9007 SM130B9007-0EN
Air conditioning components............................................................................9009 SM290B9009-0EN
Large size hydraulic schematics................................................................... Pocket 87600999A
Large size electrical schematics................................................................... Pocket 87601005A
NOTE: CNH France S.A. Company reserves the right to make changes in the specification and design of
the machine without prior notice and without incurring any obligation to modify units previously sold.
The description of the models shown in this manual has been made in accordance with the technical speci-
fications known as of the date of design of this document.
All data given in this manual is subject to production variations. Dimensions and weights are provided with
approximate values and the machine fitting shown in the illustrations may not correspond with standard
models. For precise information on specific machine models and versions, please contact your CASE
dealer.
Reproduction or tranlation, even partial, is prohibited without written authorization from CNH France SA
Company.
4. 1001-3
Lep 7-27691EN Issued 02-06
GENERAL INFORMATION
Cleanning
Clean all metal parts except bearings, in a suitable
cleaning solvent or by steam cleaning. Do not use
caustic soda for steam cleaning. After cleaning, dry
and put oil on all parts. Clean oil passages with
compressed air. Clean bearings in a suitable cleaning
solvent, dry the bearings completely and put oil on
the bearings.
Inspection
Check all parts when the parts are disassembled.
Replace all parts that have wear or damage. Small
scoring or grooves can be removed with a hone or
crocus cloth. Complete a visual inspection for
indications of wear, pitting and the replacement of
parts necessary to prevent early failures.
Bearings
Check bearings for easy action. If bearings have a
loose fit or rough action replace the bearing. Wash
bearings with a suitable cleaning solvent and permit
to air dry. DO NOT DRY BEARINGS WITH
COMPRESSED AIR.
Needle bearings
Before you press needle bearings in a bore always
remove any metal protrusions in the bore or edge of
the bore. Before you press bearings into position put
petroleum jelly on the inside and outside diameter of
the bearings.
Gears
Check all gears for wear and damage. Replace gears
that have wear or damage.
Oil seals, O-rings and gaskets
Always install new oil seals, O-rings and gaskets. Put
petroleum jelly on seals and O-rings.
Shafts
Check all shafts that have wear or damage. Check
the bearing and oil seal surfaces of the shafts for
damage.
Service parts
Always install genuine Case service parts. When
ordering refer to the Parts Catalog for the correct part
number of the genuine Case replacement items.
Failures due to the use of other than genuine Case
replacement parts are not covered by warranty.
Lubrication
Only use the oils and lubricants specified in the
Operator’s or Service Manuals. Failures due to the
use of non-specified oils and lubricants are not
covered by warranty.
5. 1001-4
Lep 7-27691EN Issued 02-06
SAFETY
This symbol means ATTENTION! BECOME ALERT! YOUR
SAFETY IS INVOLVED. The message that follows the
symbol contains important information about safety. Carefully
read the message. Make sure you fully understand the
causes of possible injury or death.
!
To prevent injury always follow the Warning, Caution
and Danger notes in this section and throughout the
manual.
Put the warning tag shown below on the key for the
keyswitch when servicing or repairing the machine.
One warning tag is supplied with each machine.
Additional tags Part Number 331-4614 are available
from your service parts supplier
.
WARNING: Read the operator’s manual to
familiarize yourself with the correct control
functions.
!
WARNING: Operate the machine and
equipment controls from the seat position
only. Any other method could result in
serious injury.
!
WARNING: This is a one man machine, no
riders allowed.
!
WARNING: Before starting engine, study
Operator’s Manual safety messages. Read
all safety signs on machine. Clear the area of
other persons. Learn and practice safe use
of controls before operating.
It is your responsibility to understand and
follow manufacturers instructions on
machine operation, service and to observe
pertinent laws and regulations. Operator’s
and Service Manuals may be obtained from
your Case dealer.
!
WARNING: If you wear clothing that is too
loose or do not use the correct safety
equipment for your job, you can be injured.
Always wear clothing that will not catch on
objects. Extra safety equipment that can be
required includes hard hat, safety shoes, ear
protection, eye or face protection, heavy
gloves and reflector clothing.
!
WARNING: When working in the area of the
fan belt with the engine running, avoid loose
clothing if possible, and use extreme caution.
!
WARNING: When doing checks and tests
on the equipment hydraulics, follow the
procedures as they are written. DO NOT
change the procedure.
!
WARNING: When putting the hydraulic
cylinders on this machine through the
necessary cycles to check operation or to
remove air from a circuit, make sure all
people are out of the way.
!
6. 1001-5
Lep 7-27691EN Issued 02-06
WARNING: Use insulated gloves or mittens
when working with hot parts.
!
WARNING: Lower all attachments to the
ground or use stands to safely support the
attachments before you do any maintenance
or service.
!
WARNING: Pin sized and smaller streams
of hydraulic oil under pressure can penetrate
the skin and result in serious infection. If
hydraulic oil under pressure does penetrate
the skin, seek medical treatment
immediately. Maintain all hoses and tubes in
good condition. Make sure all connections
are tight. Make a replacement of any tube or
hose that is damaged or thought to be
damaged. DO NOT use your hand to check
for leaks, use a piece of cardboard or wood.
!
WARNING: When removing hardened pins
such as a pivot pin, or a hardened shaft, use
a soft head (brass or bronze) hammer or use
a driver made from brass or bronze and a
steel head hammer.
!
WARNING: When using a hammer to
remove and install pivot pins or separate
parts using compressed air or using a
grinder, wear eye protection that completely
encloses the eyes (approved goggles or
other approved eye protectors).
!
WARNING: Use suitable floor (service)
jacks or chain hoist to raise wheels or tracks
off the floor. Always block machine in place
with suitable safety stands.
!
WARNING: When servicing or repairing the
machine, keep the shop floor and operator’s
compartment and steps free of oil, water,
grease, tools, etc. Use an oil absorbing
material and/or shop cloths as required. Use
safe practices at all times.
!
WARNING: Some components of this
machine are very heavy. Use suitable lifting
equipment or additional help as instructed in
this Service Manual.
!
WARNING: Engine exhaust fumes can
cause death. If it is necessary to start the
engine in a closed place, remove the exhaust
fumes from the area with an exhaust pipe
extension. Open the doors and get outside
air into the area.
!
WARNING: When the battery electrolyte is
frozen, the battery can explode if (1), you try
to charge the battery, or (2), you try to jump
start and run the engine. To prevent the
battery electrolyte from freezing, try to keep
the battery at full charge. If you do not follow
these instructions, you or others in the area
can be injured.
!
8. Lep SM290B2000-0EN Issued 01-2010
2000-3
REMOVAL AND INSTALLATION OF THE ENGINE ASSEMBLY
1 Removal of the engine
[1] Drain the engine oil.
(For details, see "Operator’s Manual".)
[2] Drain the coolant from the radiator.
(For details, see "Operator’s Manual".)
[3] Remove the engine hood.
(For details, see "Removal and Installation of Engine Hood".)
[4] Remove the pump.
(For details, see "Removal and Installation of Pump")
[5] Disassemble the retaining screws (1).
[6] Remove the 3 bolts (2), and then remove the bracket
(3).
Caution:
Keep away from fire.
Be sure to release hydraulic pressure before beginning work.
The air conditioner circuit is filled with high-pressure gas, so there is the danger of
gas splaying out when loosening lines.
Do not use open flames and do not allow sparks near the battery.
Caution:
Be sure to stop the engine before beginning work.
Be sure to inspect the wire rope and other lifting equipment before beginning work.
Do not stand or pass under the suspended load.
SF11004-003
1
2
3
SF11004-004
9. Lep SM290B2000-0EN Issued 01-2010
2000-4
[7] Remove the fan guard (4).
[8] Remove the 4 bolts, and then remove the fan guide
rubber (5).
[9] Loosen the hoseband (6), and then remove the
upper hose (7) from the radiator.
4
SF11004-005
5
SF11004-100
6 7
SF11004-006
10. Lep SM290B2000-0EN Issued 01-2010
2000-5
[10]Loosen the hoseband (6), and then remove the
lower hose (8) from the radiator.
• Use caps to cover the radiator and hoses and pre-
vent the entry of water, dust or dirt.
• Before removing the radiator hoses, completely
drain the coolant.
[11]Loosen the line bolts (9) in 2 locations, and then
remove the 2 lines (10) and (11) from the compres-
sor.
• Always remove the low-pressure pipe (10) first.
• Attach caps or plugs to the compressor and pipes to
prevent any entry of water, dust or dirt.
[12]Loosen the hoseband (12) on the inter cooler, and
then remove the hose (13).
• Use caps to cover the pipe and hose and prevent
the entry of water, dust or dirt
8
6
SF11004-007
10
11
9
SF11004-008
12
13
SF11004-009
11. Lep SM290B2000-0EN Issued 01-2010
2000-6
[13]Remove the bolts (14), and then remove the under
cover (15).
• Use caution when removing as the parts are heavy.
[14]Prepare a waste oil can (16). As the engine oil hose
will be removed, first drain the engine oil.
[15]Remove the hoses (17).
• Mark the engine and hoses so that the connectors
match at the time of assembly.
• Attach caps or plugs to the engine and hoses to pre-
vent any entry of water, dust or dirt.
• Clean the engine and hoses by spraying with a
parts cleaner to prevent scratches and prevent dirt
from accumulating on the connectors.
14
15
BF11010-002
16
SF11004-013
17
SF11004-014
12. Lep SM290B2000-0EN Issued 01-2010
2000-7
[16]Remove the bolt (18), and then remove the battery
cable (19) on the negative side.
• When removing the terminal and harness, secure
them so that do not interfere with the frame.
Also, cover with a rubber cap to protect against
sparks.
[17]Remove the nuts (22), and then remove the wire
(23) from the starter motor.
[18]Remove the hoseband (24), and then remove the
fuel hose (25).
• Attach caps or plugs to the engine and hoses to pre-
vent any entry of water, dust or dirt.
18
19 SF11004-031
22
23
SF11004-032
24
25
SF11004-034
13. Lep SM290B2000-0EN Issued 01-2010
2000-8
[19]Remove the hoseband (26), and then remove the
fuel hose (27).
• Attach caps or plugs to the engine and hoses to pre-
vent any entry of water, dust or dirt.
[20]Disassemble the retaining screws (28), and then
remove the box cover (29).
[21]Remove the connectors (30) in the box.
• After tying the connectors together, put them in a
plastic bag.
26
27
SF11004-035
28
29
SF11004-036
30
SF11004-015
14. Lep SM290B2000-0EN Issued 01-2010
2000-9
[22]Loosen the hoseband (31), and then remove the
heater hose (32).
• Attach caps or plugs to the engine and hoses to pre-
vent any entry of water, dust or dirt.
[23]Loosen the hoseband (33), and then remove the
heater hose (34).
• Attach caps or plugs to the engine and hoses to pre-
vent any entry of water, dust or dirt.
[24]Loosen the hoseband (35), and then remove the
radiator hose (36).
• Use caps to cover the line and hose and prevent the
entry of water, dust or dirt.
31
32
SF11004-016
33
34
SF11004-017
35
36
SF11004-018
15. Lep SM290B2000-0EN Issued 01-2010
2000-10
[25]Loosen the hoseband (37), and then remove the air
hose (38).
• Use caps to cover the line and hose and prevent the
entry of water, dust or dirt.
[26]Loosen the hoseband (39), and then remove the air
hose (40).
• Use caps to cover the line and hose and prevent the
entry of water, dust or dirt.
[27]Remove the connector (41) from the alternator.
37 38
SF11004-019
40 39
SF11004-020
41
SF11004-021
16. Lep SM290B2000-0EN Issued 01-2010
2000-11
[28]Remove the cap (42), remove the nut (44), and then
remove the wire (43) from the alternator.
[29]Connect the 2 shackles (45), and then use the
wires and crane to secure the engine.
44
42
43
SF11004-022
45
45
SF11004-025
17. Lep SM290B2000-0EN Issued 01-2010
2000-12
[30]Disassemble the retaining screws (47) from the
mount.
[31]Use the wires and crane to lift the engine.
[32]Thoroughly check that the location is safe before
lowering the engine on wood planks, etc.
47
SF11004-026
47 SF11004-023
SF11004-027
18. Lep SM290B2000-0EN Issued 01-2010
2000-13
2 Installation of the engine
[1] To install the engine, perform the reverse of the removal procedure.
After installing the engine, resupply coolant and engine oil, perform fuel line air bleeding, and perform filling for the
air conditioner gas.
For details, see the individual explanations for each procedure.
[2] Run the engine at no-load idling and check for any water or oil leaks.
[3] Attach the hydraulic pump, covers, and counterweight.
For details, see the individual explanations for each procedure.
19. Lep SM290B2001-0EN Issued 01-2010
2001-3
REMOVAL AND INSTALLATION OF FUEL COOLER
1 Removal of fuel cooler
[1] Mark the fuel cooler (5) and hoses so that the con-
nectors match at the time of assembly.
Loosen the hosebands (3) and (4), and then remove
the hoses (1) and (2).
• Fuel will spill out, so place a drip pan directly below
the area.
• Attach caps or plugs to the fuel cooler and hoses to
prevent any entry of water, dust or dirt.
[2] Disassemble the retaining screws (6), and then
remove the fuel cooler unit (5).
2 Installation the fuel cooler
Perform the reverse of the removal procedure.
• After connecting the hoses, carefully check for any fuel leaks.
Caution:
Be sure to stop the engine before beginning work.
As the fuel hose will be removed, strictly prohibit open flames.
5
3 1 4 2
SF11004-137
5
6
SF11004-138
20. Lep SM290B2001-0EN Issued 01-2010
2001-4
REMOVAL AND INSTALLATION OF INTER COOLER
1 Removal of inter cooler
[1] Remove the fuel cooler.
(For details, see "Removal and Installation of Fuel
Cooler")
[2] Use a wrench (14 mm) to remove the 4 bolts (1),
and then remove the bracket (2) from the fuel cooler.
[3] Loosen the hosebands (3) in the two locations, and
then remove the two hoses (4) and (5).
• Use caps to cover the inter cooler and hoses to pre-
vent the entry of water, dust or dirt.
[4] Use a wrench (14 mm) to remove the 4 bolts (6),
and then remove the inter cooler (7).
2 Installation of inter cooler
Perform the reverse of the removal procedure.
Check for any air leaks.
Caution:
Be sure to stop the engine before beginning work.
As the fuel hose will be removed, strictly prohibit open flames.
1
2
SF11004-126
3
4 5
SF11004-127
6
7
SF11004-128
21. Lep SM290B2001-0EN Issued 01-2010
2001-5
REMOVAL AND INSTALLATION OF RADIATOR
1 Removal of radiator
[1] Disassemble the retaining screws (1), and then
remove the under cover (2).
[2] Install the drain hose (3), and then prepare the drain
tank (4).
Caution:
Do not remove the radiator cap when the radiator coolant temperature is high. Hot
liquid could spray out.
Caution:
Be sure to release hydraulic pressure before beginning work.
Be sure to stop the engine before beginning work.
Be sure to inspect the wire rope and other lifting equipment before beginning work.
Do not stand or pass under the suspended load.
2
1 BM13010-001
RM13001-001
3
4
22. Lep SM290B2001-0EN Issued 01-2010
2001-6
[3] To make it easier to drain the coolant, remove the
radiator cap (5).
[4] Loosen the drain plug (6), and then drain the cool-
ant.
[5] Loosen the hoseband (7), and then remove the hose
(8).
• Use caps to cover the pipe and hose and prevent
the entry of water, dust or dirt.
SM13004-003
5
RM13001-004
6
SM13004-005
7
8
23. Lep SM290B2001-0EN Issued 01-2010
2001-7
[6] Use a wrench (8 mm) to loosen the hose band (7),
and then remove the hose (9).
• Use caps to cover the pipe and hose and prevent
the entry of water, dust or dirt.
[7] Use a wrench (19 mm) to remove the 4 bolts (10),
and then remove the seal bracket (11).
[8] Use a box wrench (19 mm) to remove the 6 bolts
(12) from the radiator cover.
7
9
SM13004-006
11
10 SM13004-008
SM13004-010
12
24. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
25. Lep SM290B2001-0EN Issued 01-2010
2001-8
[9] Loosen the hosebands (13), and then remove the
upper hose (14) and the lower hose (15) from the
radiator.
• Use caps to cover the radiator and hoses and pre-
vent the entry of water, dust or dirt.
[10]Remove the drain plug (16), Loosen the hoseband
(17), and then remove the hose (18).
13 14
15
13 SM13004-011
16
18
17
SM13004-012
26. Lep SM290B2001-0EN Issued 01-2010
2001-9
[11]Loosen the hoseband (20), and then remove the
hose (19) from the radiator cap.
• Attach caps or plugs to the hoses to prevent any
entry of water, dust or dirt.
[12]Use a wrench (14 mm) to remove the 3 bolts (21).
[13]Use a wrench (14 mm) to remove the bolts (22),
and then remove the bracket (23).
SM13004-013
20 19
SM13004-020
21
22
23
SM13004-021
27. Lep SM290B2001-0EN Issued 01-2010
2001-10
[14]Remove the fan guard (24).
[15]Remove the fan guide rubber (25).
[16]Remove the 2 butterfly bolts (26), and then remove
the front anti-insect net (27).
24
SM13004-022
25
SM13004-002
26 27
SM13004-024
28. Lep SM290B2001-0EN Issued 01-2010
2001-11
[17]Install the 2 shackles (28) to the top of the radiator,
and then use the wire rope (29) and liftcrane to lift
the radiator.
[18]Lift the radiator together with the radiator cover (31)
until the fixtures (30) at the bottom of the radiator
become disconnected.
28
29
SM13004-025
30
31
SM13004-026