This document provides the table of contents for a manual on 788/988 crawler and wheeled excavators. It lists sections covering general information, safety, specifications, and maintenance and repair instructions for various engine, fuel, electrical, undercarriage, drive train, hydraulic, and other systems. The summary focuses on the high-level sections and parts included rather than detailing contents of individual sections.
Case 788 plus crawler excavator service repair manualfusjejfjskekemm
This document provides the table of contents for a manual on 788/988 crawler and wheeled excavators. It lists sections covering general information, safety, specifications, the engine, fuel system, electrical system, undercarriage, drive train, hydraulics, and the upperstructure. The document includes instructions for removing and installing the engine on various 788 and 988 excavator models. It also lists additional resources like service manuals and diagnostic tools that provide more details.
This document is a repair manual for Jaguar 900-830 Profistar and Speedstar harvesters. It contains sections covering the operator's platform, cab, heating, air conditioning, driver's seat, operating elements, steering, brakes, and electrics systems. The manual provides instructions for removing, dismantling, assembling, and fitting various components of these systems. Safety information is also provided at the beginning, including important notes on general safety rules, pressure accumulators, and maintenance.
Mc cormick gx series tier 1 (2002 2004) - rp80 - gx45 gxh45 tractor service ...fujsjefjskkem
This document provides parts information for components of Mistral GX tractors, including names, part numbers, and other identifying information. It lists over 100 individual part items, noting replacement times/intervals and other specifications like size variations in some cases. Images are included with part numbers and reference designations for the various tractor components.
Mc cormick g max iveco tier 3 (2007-2012) - rp74 - 165 tractor service repair...fujsjefjskkem
This document provides a parts list and exploded diagrams for an Iveco G-MAX engine. It lists over 200 individual part numbers, names and diagrams to replace or repair engine components. Key information included are part names and numbers for the engine, pistons, rods, camshaft, head, valves, turbocharger, pump and other internal components. Replacement parts and shims are specified for wear items. Reference diagrams and page numbers are provided to identify the location of each part.
Mc cormick g max iveco tier 3 (2007-2012) - rp74 - 135 tractor service repair...fujsjefjskkem
This document provides parts information for an Iveco engine. It includes lists of parts with reference numbers and descriptions. The parts are grouped by engine system, such as the cylinder head, camshaft, fuel system, and other areas. Shim sizes and replacement part designations are also provided for some items.
Mc cormick g max iveco tier 3 (2007-2012) - rp74 - 125 tractor service repair...fujsjefjskkem
This document provides parts information for an engine. It includes over 100 individual part listings with images, part numbers, descriptions and reference numbers. The parts are grouped by engine system (e.g. engine, head, pump). Each part includes specifications like size, material and quantity required. Reference numbers link to other pages for related component assembly diagrams.
Mc cormick gm series tier 2 (2003 2008) - rs11 - gm45 tractor service repair ...fujsjefjskkem
This document contains parts lists and assembly diagrams for engine components. It includes identification numbers, part names, quantities and other technical specifications for items like pistons, valves, gears, shafts, bolts and other engine parts. Application and replacement information is provided for components. The parts are for a GM Series Tier 2 diesel engine from 2003-2008.
Mc cormick gm series tier 1 (1998 2003) - rs10 - gm50 tractor service repair ...fujsjefjskkem
This document contains parts lists and technical specifications for components of agricultural tractors. It includes identification numbers, descriptions, quantities, and other details for engine blocks, gaskets, studs, plugs, bolts, rings, pistons, shafts, gears, bearings, valves, springs, and other internal combustion engine parts. Replacement part types and sizing are indicated. The parts are for tractors in the GM Series Tier 1 from 1998-2003.
Case 788 plus crawler excavator service repair manualfusjejfjskekemm
This document provides the table of contents for a manual on 788/988 crawler and wheeled excavators. It lists sections covering general information, safety, specifications, the engine, fuel system, electrical system, undercarriage, drive train, hydraulics, and the upperstructure. The document includes instructions for removing and installing the engine on various 788 and 988 excavator models. It also lists additional resources like service manuals and diagnostic tools that provide more details.
This document is a repair manual for Jaguar 900-830 Profistar and Speedstar harvesters. It contains sections covering the operator's platform, cab, heating, air conditioning, driver's seat, operating elements, steering, brakes, and electrics systems. The manual provides instructions for removing, dismantling, assembling, and fitting various components of these systems. Safety information is also provided at the beginning, including important notes on general safety rules, pressure accumulators, and maintenance.
Mc cormick gx series tier 1 (2002 2004) - rp80 - gx45 gxh45 tractor service ...fujsjefjskkem
This document provides parts information for components of Mistral GX tractors, including names, part numbers, and other identifying information. It lists over 100 individual part items, noting replacement times/intervals and other specifications like size variations in some cases. Images are included with part numbers and reference designations for the various tractor components.
Mc cormick g max iveco tier 3 (2007-2012) - rp74 - 165 tractor service repair...fujsjefjskkem
This document provides a parts list and exploded diagrams for an Iveco G-MAX engine. It lists over 200 individual part numbers, names and diagrams to replace or repair engine components. Key information included are part names and numbers for the engine, pistons, rods, camshaft, head, valves, turbocharger, pump and other internal components. Replacement parts and shims are specified for wear items. Reference diagrams and page numbers are provided to identify the location of each part.
Mc cormick g max iveco tier 3 (2007-2012) - rp74 - 135 tractor service repair...fujsjefjskkem
This document provides parts information for an Iveco engine. It includes lists of parts with reference numbers and descriptions. The parts are grouped by engine system, such as the cylinder head, camshaft, fuel system, and other areas. Shim sizes and replacement part designations are also provided for some items.
Mc cormick g max iveco tier 3 (2007-2012) - rp74 - 125 tractor service repair...fujsjefjskkem
This document provides parts information for an engine. It includes over 100 individual part listings with images, part numbers, descriptions and reference numbers. The parts are grouped by engine system (e.g. engine, head, pump). Each part includes specifications like size, material and quantity required. Reference numbers link to other pages for related component assembly diagrams.
Mc cormick gm series tier 2 (2003 2008) - rs11 - gm45 tractor service repair ...fujsjefjskkem
This document contains parts lists and assembly diagrams for engine components. It includes identification numbers, part names, quantities and other technical specifications for items like pistons, valves, gears, shafts, bolts and other engine parts. Application and replacement information is provided for components. The parts are for a GM Series Tier 2 diesel engine from 2003-2008.
Mc cormick gm series tier 1 (1998 2003) - rs10 - gm50 tractor service repair ...fujsjefjskkem
This document contains parts lists and technical specifications for components of agricultural tractors. It includes identification numbers, descriptions, quantities, and other details for engine blocks, gaskets, studs, plugs, bolts, rings, pistons, shafts, gears, bearings, valves, springs, and other internal combustion engine parts. Replacement part types and sizing are indicated. The parts are for tractors in the GM Series Tier 1 from 1998-2003.
Mc cormick gm series tier 1 (1998 2003) - rs10 - gm40 tractor service repair ...fujsjefjskkem
This document contains parts lists and technical specifications for engine components. It includes identification numbers, part names, quantities, and other details for items like blocks, gaskets, pistons, valves, covers, and more. Replacement part options are indicated as well as specifications like size variations. The parts appear to be for agricultural or construction vehicle engines from a particular manufacturer.
Komatsu pw160 7 k hydraulic excavator service repair manual (sn k40001 and up)fujsjefjskkem
This document provides instructions for removing and installing various components of a Komatsu PW160-7K engine, including the cylinder head assembly. The multi-step removal process involves draining fluids, disconnecting electrical connections and hoses, and removing components like the cooling fan, alternator, and turbocharger. Installation is generally the reverse of removal, with specific torque specifications provided. Special tools are listed for pulling components like the nozzle holder assemblies.
Komatsu pw140 7 hydraulic excavator service repair manual (sn h55051 and up)fujsjefjskkem
This shop manual provides information for servicing and repair of the Komatsu PW140-7 wheel loader. It contains sections on structure and function, maintenance standards, testing and troubleshooting procedures, disassembly and assembly instructions. The manual covers the SAA4D107E-1 engine installed on the PW140-7 and refers technicians to the separate 107 Series Engine Shop Manual for engine-specific details. Safety precautions are outlined to ensure safe operation when working on the machine.
Komatsu pc1800 6 hydraulic excavator service repair manual (sn 10002 and up)fujsjefjskkem
1. This shop manual provides instructions for repairing and maintaining a Komatsu PC1800-6 excavator with a SAA6D140-2 engine.
2. The manual is divided into sections covering general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and other topics like diagrams.
3. Safety is emphasized throughout with symbols marking important safety precautions that must be followed during repair work. Precautions are provided for preparations, work procedures, and completing work.
This shop manual provides technical information for servicing a Komatsu PC400LC-7L hydraulic excavator. It includes specifications, component weights, fuel and fluid specifications, and sections covering general machine information, structure and function, testing and troubleshooting, disassembly and assembly, and maintenance standards. The manual is intended to help technicians accurately service the excavator by explaining correct repair procedures.
Komatsu pc250 lc 6 hydraulic excavator service repair manual sna82001 and upfujsjefjskkem
This document is a shop manual for Komatsu hydraulic excavators models PC200-6, PC200LC-6, PC210LC-6, PC220LC-6, and PC250LC-6. The manual provides technical information for maintenance and repair work. It includes sections on general specifications, structure and function of components, testing and adjustment procedures, disassembly and assembly instructions, and maintenance standards for parts. The manual aims to improve repair quality by giving technicians accurate understanding and instructions for working on the excavators safely and correctly.
Komatsu pc220 lc 6 hydraulic excavator service repair manual sn a82001 and upfujsjefjskkem
This document provides specifications for the Komatsu PC200-6 and PC200LC-6 hydraulic excavators, including operating weight, dimensions, performance capabilities, and other technical details. Key specifications listed include a 0.8 m3 bucket capacity, maximum digging depths of 6.62 meters, maximum digging reaches of 9.88 meters, and travel speeds up to 4 km/h. Component weights, fuel/coolant types, and maintenance standards are also outlined.
Komatsu pc210 lc 6 hydraulic excavator service repair manual sna82001 and upfujsjefjskkem
This document provides specifications for the Komatsu PC200-6 and PC200LC-6 hydraulic excavators, including operating weight, dimensions, performance capabilities, and other technical details. Key specifications listed include a 0.8 m3 bucket capacity, maximum digging depths of 6.62 meters, maximum digging reaches of 9.88 meters, and travel speeds up to 4 km/h. Component weights, fuel/coolant types, and maintenance standards are also detailed in other sections of the manual.
Komatsu pc200 lc 6 hydraulic excavator service repair manual sna82001 and upfujsjefjskkem
This document provides specifications for the Komatsu PC200-6 and PC200LC-6 hydraulic excavators, including operating weight, dimensions, performance capabilities, and other technical details. Key specifications listed include a maximum digging depth of 6.62 meters, maximum digging reach of 9.88 meters, and maximum digging force of 11,400 kg for both models. The document also provides the machine's overall dimensions, ground pressure, travel speed, swing features, and other technical specifications.
Komatsu pc200 6 hydraulic excavator service repair manual sn a82001 and upfujsjefjskkem
This document is a shop manual for Komatsu hydraulic excavators models PC200-6, PC200LC-6, PC210LC-6, PC220LC-6, and PC250LC-6. The manual provides technical information for maintenance and repair work. It includes sections on general specifications, structure and function of components, testing and adjustment procedures, disassembly and assembly instructions, and maintenance standards for parts. The manual aims to improve repair quality by giving technicians accurate understanding and instructions for working on the excavators safely and correctly.
John deere 8235 r tractors service repair technical manual (tm110319)fujsjefjskkem
This document provides specifications and removal instructions for the transmission on several tractor models. It includes:
- Specifications for torque values for various transmission components.
- Instructions to drain fluids, disconnect wiring, hoses and lines, and remove components to separate the transmission from the engine and mid-frame.
- Details on using a splitting stand to safely support the tractor for transmission removal and installation.
John deere 6600 tractors service repair technical manual (tm4493)fujsjefjskkem
This document provides instructions for adjusting the shift mechanism on tm4493 tractors from 6100 to 6600 models. It involves the following steps:
1. Place the shifter shafts in the neutral position.
2. Adjust the shifter forks using threaded pins until they are centered in relation to the shift collars.
3. Move the shifter forks to all positions and ensure smooth shifting without binding or overlap between positions. Tighten locknuts on threaded pins to complete the adjustment.
John deere 6506 tractors service repair technical manual (tm4493)fujsjefjskkem
This document provides instructions for adjusting the shift mechanism on tm4493 tractors from 6100 to 6600 models. It involves the following steps:
1. Place the shifter shafts in the neutral position.
2. Adjust the shifter forks using threaded pins until they are centered in relation to the shift collars.
3. Move the shifter forks to all positions and ensure smooth shifting without binding or overlap between positions. Tighten locknuts on threaded pins to complete the adjustment.
John deere 6400 tractors service repair technical manual (tm4493)fujsjefjskkem
This document provides instructions for adjusting the shift mechanism on tm4493 tractors from 6100 to 6600 models. It involves the following steps:
1. Place the shifter shafts in the neutral position.
2. Adjust the shifter forks using threaded pins until they are centered in relation to the shift collars.
3. Move the shifter forks to all positions and ensure smooth shifting without binding or overlap between positions. Tighten locknuts on threaded pins to complete the adjustment.
John deere 6300 tractors service repair technical manual (tm4493)fujsjefjskkem
This document provides instructions for adjusting the cone point on differentials for 6100 to 6600 tractors. It involves measuring specific dimensions, calculating the required spacer washer thickness, and selecting the appropriate washers. The final section lists some special tools needed for tasks like tilting the cab, supporting the tractor during wheel removal, and removing/installing shafts.
Daewoo doosan mega 400 v wheel loader service repair manual (serial number 10...fujsjefjskkem
This document provides maintenance and repair instructions for a Daewoo Mega 400-V wheel loader transmission. It details procedures for disassembling the transmission and torque converter components. This includes removing clutches, gears, shafts, bearings, seals and other parts. Illustrations demonstrate each step in the disassembly process. The document is part of a shop manual for servicing the Mega 400-V.
Daewoo doosan mega 400 v wheel loader operation and maintenance manual (seria...fujsjefjskkem
This document provides safety information and operating instructions for a Daewoo wheel loader. It outlines general safety practices, locations of safety labels on the machine, and prohibited unauthorized modifications. The document describes work-site precautions and safe practices for operating, maintaining, and transporting the wheel loader. It includes sections covering operating controls and their functions, starting and stopping the engine, machine travel, shutdown procedures, and inspection and maintenance schedules. Transportation procedures for loading the machine on a trailer are also included.
Daewoo doosan mega 300 v wheel loader operator and maintenance manual (serial...fujsjefjskkem
The document is an operation and maintenance manual for a Daewoo wheel loader. It contains safety information and instructions for operating and maintaining the equipment. The safety section emphasizes that improper use could cause serious injury or death. It explains the meanings of signal words like CAUTION, WARNING, and DANGER used in the manual and on safety labels. It also provides general safety guidelines for accessing, modifying, using and transporting the wheel loader.
Daewoo doosan mega 250 v wheel loader operation and maintenance manual (seria...fujsjefjskkem
This document is an operation and maintenance manual for a Daewoo wheel loader. It contains safety information and warnings, descriptions of operating controls and their functions, procedures for operation, and maintenance and inspection schedules. Safety labels located on the machine are also pictured and described.
Daewoo doosan dx520 lc excavator service repair manualfujsjefjskkem
This document provides instructions for disassembling and reassembling the travel motor and gearbox for Doosan excavators DX480LC and DX520LC. The disassembly process involves removing 16 bolts to separate the end cover, then removing 3 sun gears and 3 planetary gear assemblies. Cleaning and inspection checks for gear and seal damage. Reassembly follows the reverse order, applying loctite to bolts and torquing correctly. Diagrams illustrate each step for servicing the travel motor with integrated gear reduction.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Mc cormick gm series tier 1 (1998 2003) - rs10 - gm40 tractor service repair ...fujsjefjskkem
This document contains parts lists and technical specifications for engine components. It includes identification numbers, part names, quantities, and other details for items like blocks, gaskets, pistons, valves, covers, and more. Replacement part options are indicated as well as specifications like size variations. The parts appear to be for agricultural or construction vehicle engines from a particular manufacturer.
Komatsu pw160 7 k hydraulic excavator service repair manual (sn k40001 and up)fujsjefjskkem
This document provides instructions for removing and installing various components of a Komatsu PW160-7K engine, including the cylinder head assembly. The multi-step removal process involves draining fluids, disconnecting electrical connections and hoses, and removing components like the cooling fan, alternator, and turbocharger. Installation is generally the reverse of removal, with specific torque specifications provided. Special tools are listed for pulling components like the nozzle holder assemblies.
Komatsu pw140 7 hydraulic excavator service repair manual (sn h55051 and up)fujsjefjskkem
This shop manual provides information for servicing and repair of the Komatsu PW140-7 wheel loader. It contains sections on structure and function, maintenance standards, testing and troubleshooting procedures, disassembly and assembly instructions. The manual covers the SAA4D107E-1 engine installed on the PW140-7 and refers technicians to the separate 107 Series Engine Shop Manual for engine-specific details. Safety precautions are outlined to ensure safe operation when working on the machine.
Komatsu pc1800 6 hydraulic excavator service repair manual (sn 10002 and up)fujsjefjskkem
1. This shop manual provides instructions for repairing and maintaining a Komatsu PC1800-6 excavator with a SAA6D140-2 engine.
2. The manual is divided into sections covering general information, structure and function, testing and adjusting, disassembly and assembly, maintenance standards, and other topics like diagrams.
3. Safety is emphasized throughout with symbols marking important safety precautions that must be followed during repair work. Precautions are provided for preparations, work procedures, and completing work.
This shop manual provides technical information for servicing a Komatsu PC400LC-7L hydraulic excavator. It includes specifications, component weights, fuel and fluid specifications, and sections covering general machine information, structure and function, testing and troubleshooting, disassembly and assembly, and maintenance standards. The manual is intended to help technicians accurately service the excavator by explaining correct repair procedures.
Komatsu pc250 lc 6 hydraulic excavator service repair manual sna82001 and upfujsjefjskkem
This document is a shop manual for Komatsu hydraulic excavators models PC200-6, PC200LC-6, PC210LC-6, PC220LC-6, and PC250LC-6. The manual provides technical information for maintenance and repair work. It includes sections on general specifications, structure and function of components, testing and adjustment procedures, disassembly and assembly instructions, and maintenance standards for parts. The manual aims to improve repair quality by giving technicians accurate understanding and instructions for working on the excavators safely and correctly.
Komatsu pc220 lc 6 hydraulic excavator service repair manual sn a82001 and upfujsjefjskkem
This document provides specifications for the Komatsu PC200-6 and PC200LC-6 hydraulic excavators, including operating weight, dimensions, performance capabilities, and other technical details. Key specifications listed include a 0.8 m3 bucket capacity, maximum digging depths of 6.62 meters, maximum digging reaches of 9.88 meters, and travel speeds up to 4 km/h. Component weights, fuel/coolant types, and maintenance standards are also outlined.
Komatsu pc210 lc 6 hydraulic excavator service repair manual sna82001 and upfujsjefjskkem
This document provides specifications for the Komatsu PC200-6 and PC200LC-6 hydraulic excavators, including operating weight, dimensions, performance capabilities, and other technical details. Key specifications listed include a 0.8 m3 bucket capacity, maximum digging depths of 6.62 meters, maximum digging reaches of 9.88 meters, and travel speeds up to 4 km/h. Component weights, fuel/coolant types, and maintenance standards are also detailed in other sections of the manual.
Komatsu pc200 lc 6 hydraulic excavator service repair manual sna82001 and upfujsjefjskkem
This document provides specifications for the Komatsu PC200-6 and PC200LC-6 hydraulic excavators, including operating weight, dimensions, performance capabilities, and other technical details. Key specifications listed include a maximum digging depth of 6.62 meters, maximum digging reach of 9.88 meters, and maximum digging force of 11,400 kg for both models. The document also provides the machine's overall dimensions, ground pressure, travel speed, swing features, and other technical specifications.
Komatsu pc200 6 hydraulic excavator service repair manual sn a82001 and upfujsjefjskkem
This document is a shop manual for Komatsu hydraulic excavators models PC200-6, PC200LC-6, PC210LC-6, PC220LC-6, and PC250LC-6. The manual provides technical information for maintenance and repair work. It includes sections on general specifications, structure and function of components, testing and adjustment procedures, disassembly and assembly instructions, and maintenance standards for parts. The manual aims to improve repair quality by giving technicians accurate understanding and instructions for working on the excavators safely and correctly.
John deere 8235 r tractors service repair technical manual (tm110319)fujsjefjskkem
This document provides specifications and removal instructions for the transmission on several tractor models. It includes:
- Specifications for torque values for various transmission components.
- Instructions to drain fluids, disconnect wiring, hoses and lines, and remove components to separate the transmission from the engine and mid-frame.
- Details on using a splitting stand to safely support the tractor for transmission removal and installation.
John deere 6600 tractors service repair technical manual (tm4493)fujsjefjskkem
This document provides instructions for adjusting the shift mechanism on tm4493 tractors from 6100 to 6600 models. It involves the following steps:
1. Place the shifter shafts in the neutral position.
2. Adjust the shifter forks using threaded pins until they are centered in relation to the shift collars.
3. Move the shifter forks to all positions and ensure smooth shifting without binding or overlap between positions. Tighten locknuts on threaded pins to complete the adjustment.
John deere 6506 tractors service repair technical manual (tm4493)fujsjefjskkem
This document provides instructions for adjusting the shift mechanism on tm4493 tractors from 6100 to 6600 models. It involves the following steps:
1. Place the shifter shafts in the neutral position.
2. Adjust the shifter forks using threaded pins until they are centered in relation to the shift collars.
3. Move the shifter forks to all positions and ensure smooth shifting without binding or overlap between positions. Tighten locknuts on threaded pins to complete the adjustment.
John deere 6400 tractors service repair technical manual (tm4493)fujsjefjskkem
This document provides instructions for adjusting the shift mechanism on tm4493 tractors from 6100 to 6600 models. It involves the following steps:
1. Place the shifter shafts in the neutral position.
2. Adjust the shifter forks using threaded pins until they are centered in relation to the shift collars.
3. Move the shifter forks to all positions and ensure smooth shifting without binding or overlap between positions. Tighten locknuts on threaded pins to complete the adjustment.
John deere 6300 tractors service repair technical manual (tm4493)fujsjefjskkem
This document provides instructions for adjusting the cone point on differentials for 6100 to 6600 tractors. It involves measuring specific dimensions, calculating the required spacer washer thickness, and selecting the appropriate washers. The final section lists some special tools needed for tasks like tilting the cab, supporting the tractor during wheel removal, and removing/installing shafts.
Daewoo doosan mega 400 v wheel loader service repair manual (serial number 10...fujsjefjskkem
This document provides maintenance and repair instructions for a Daewoo Mega 400-V wheel loader transmission. It details procedures for disassembling the transmission and torque converter components. This includes removing clutches, gears, shafts, bearings, seals and other parts. Illustrations demonstrate each step in the disassembly process. The document is part of a shop manual for servicing the Mega 400-V.
Daewoo doosan mega 400 v wheel loader operation and maintenance manual (seria...fujsjefjskkem
This document provides safety information and operating instructions for a Daewoo wheel loader. It outlines general safety practices, locations of safety labels on the machine, and prohibited unauthorized modifications. The document describes work-site precautions and safe practices for operating, maintaining, and transporting the wheel loader. It includes sections covering operating controls and their functions, starting and stopping the engine, machine travel, shutdown procedures, and inspection and maintenance schedules. Transportation procedures for loading the machine on a trailer are also included.
Daewoo doosan mega 300 v wheel loader operator and maintenance manual (serial...fujsjefjskkem
The document is an operation and maintenance manual for a Daewoo wheel loader. It contains safety information and instructions for operating and maintaining the equipment. The safety section emphasizes that improper use could cause serious injury or death. It explains the meanings of signal words like CAUTION, WARNING, and DANGER used in the manual and on safety labels. It also provides general safety guidelines for accessing, modifying, using and transporting the wheel loader.
Daewoo doosan mega 250 v wheel loader operation and maintenance manual (seria...fujsjefjskkem
This document is an operation and maintenance manual for a Daewoo wheel loader. It contains safety information and warnings, descriptions of operating controls and their functions, procedures for operation, and maintenance and inspection schedules. Safety labels located on the machine are also pictured and described.
Daewoo doosan dx520 lc excavator service repair manualfujsjefjskkem
This document provides instructions for disassembling and reassembling the travel motor and gearbox for Doosan excavators DX480LC and DX520LC. The disassembly process involves removing 16 bolts to separate the end cover, then removing 3 sun gears and 3 planetary gear assemblies. Cleaning and inspection checks for gear and seal damage. Reassembly follows the reverse order, applying loctite to bolts and torquing correctly. Diagrams illustrate each step for servicing the travel motor with integrated gear reduction.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Case 988 plus crawler excavator service repair manual
1. Copyright 2000 Case France
Printed in France
Case Cre 7-58655GB March 2000
788/988 - 788/988 Plus Crawler Excavators
788/988 - 788/988 Plus Wheeled Excavators
Table of Contents
DIVISION/SECTION SECTION N° REFERENCE N°
1 GENERAL INFORMATION
Safety, general and torque settings .................................................................1001 7-56942GB
Specifications (Crawler excavators).................................................................1002 7-80071GB
Specifications (Wheeled excavators)...............................................................1002 7-80062GB
2 ENGINE
Engine removal and installation (788 - 988 - 988 Plus ....................................2002 7-58681GB
Engine removal and installation (788 Plus)......................................................2002 7-26560GB
Radiator and oil cooler.....................................................................................2003 7-80621GB
Engine specifications .......................................................................................2401 **
Cylinder head and valve assembly ..................................................................2415 * *
Engine block ....................................................................................................2425 * *
Lubrication system...........................................................................................2445 * *
Cooling system ................................................................................................2455 * *
Turbocharger....................................................................................................2465 * *
Turbocharger failure analysis...........................................................................2565 * *
3 FUEL SYSTEM
Fuel system and filter.......................................................................................3410 * *
CAV injection pump..........................................................................................3411 * *
BOSCH injection pump....................................................................................3412 * *
Fuel injector .....................................................................................................3412 * *
BOSCH ANEROID fuel injection pump............................................................3416 * *
4 ELECTRICAL SYSTEM
Electrical schematic (Crawler excavators) - (before November 1999).............4001 7-80040GB
Electrical schematic (Wheeled excavators) - (before November 1999)...........4001 7-80021GB
Electrical schematic (Crawler excavators) - (November 1999 and after).........4001 7-26570GB
Electrical schematic (Wheeled excavators) - (November 1999 and after).......4001 7-26540GB
Electronic system and troubleshooting (Crawler excavators)..........................4002 7-80031GB
Electronic system and troubleshooting (Wheeled excavators) ........................4002 7-80051GB
Starter motor....................................................................................................4003 7-58691GB
Alternator .........................................................................................................4004 7-58701GB
Powersensor diagnostic tool............................................................................4010 7-79991GB
5 UNDERCARRIAGE
Track group (Crawler excavators)....................................................................5002 7-58711GB
6 DRIVE TRAIN
Travel reduction gear and brake (Crawler excavators)....................................6002 7-80661GB
Swing reduction gear and brake (788 - 788 Plus)............................................6003 7-80671GB
Swing reduction gear and brake (988).............................................................6003 7-58731GB
Swing reduction gear and brake (988 Plus).....................................................6003 7-84141GB
Front axle and service brake (Wheeled excavators)........................................6004 7-80681GB
Rear axle and service brake (Wheeled excavators) ........................................6005 7-80691GB
Gearbox and parking brake (Wheeled excavators) .........................................6008 7-80701GB
Twin wheels (Wheeled excavators) .................................................................6020 7-26170GB
* * Consult the engine Service Manual.
2. Cre 7-58655GB Issued 03-00
DIVISION/SECTION SECTION N° REFERENCE N°
7 UNDERCARRIAGE HYDRAULICS
Hydraulic travel motor (Mono-speed crawler excavators)................................7002 7-80711GB
Hydraulic travel motor (Two-speed crawler excavators) ..................................7003 7-80721GB
Hydraulic travel motor (Wheeled excavators)..................................................7003 7-80731GB
Travel control valve (Crawler excavators)........................................................7030 7-80741GB
Travel, stabilizer and dozer blade control valve
(wheeled excavators) ..................................................................................7031 7-84151GB
Steering, stabilizer, dozer blade and front axle locking cylinders
(wheeled excavators ) .................................................................................7080 7-84161GB
8 UPPERSTRUCTURE HYDRAULICS
Hydraulic inspection, adjustment and schematics
(crawler excavators) ....................................................................................8001 7-24590GB
Hydraulic inspection, adjustment and schematics
(wheeled excavators) ..................................................................................8001 7-24580GB
Hydraulic swivel (Crawler excavators) .............................................................8011 7-80791GB
Hydraulic swivel (Wheeled excavators) ...........................................................8011 7-80801GB
Hydraulic pumps (788 - 788 Plus)....................................................................8020 7-80211GB
Hydraulic pumps (988 - 988 Plus)....................................................................8020 7-58862GB
Hydraulic swing pump......................................................................................8021 7-21700GB
Attachment control valve..................................................................................8031 7-80821GB
Swing control valve..........................................................................................8033 7-80831GB
Rotary control valve (Orbitrol) (Wheeled excavators)......................................8037 7-80841GB
Hydraulic swing motor and forced-feed safety block .......................................8040 7-80851GB
Attachment and swing control block ...............................................................8050 7-80261GB
Travel and option control block
(Foot pedal, Wheeled excavators)...............................................................8051 7-80270GB
Travel hand control block (Inching, wheeled excavators) ................................8052 7-80870GB
Direction of travel inverter control block (Inching, crawler excavators)............8053 7-80290GB
Travel control block (788 - 788 Plus 988 - 988 Plus wheeled excavators) ......8054 7-80301GB
Brake module (wheeled excavators)................................................................8060 7-80882GB
Parking brake electro-control valve (wheeled excavators) ..............................8061 7-80952GB
Electro-control valve block (Crawler excavators).............................................8070 7-80321GB
Electro-control valve block (wheeled excavators)............................................8071 7-84191GB
Selector block (788 Plus).................................................................................8072 7-26650GB
Attachment cylinders........................................................................................8080 7-84201GB
Safety valve .....................................................................................................8081 7-26640GB
3. Cre 7-58655GB Issued 03-00
DIVISION/SECTION SECTION N° REFERENCE N°
9 UPPERSTRUCTURE
Upperstructure and turntable bearing ..............................................................9002 7-58932GB
Cab ..................................................................................................................9004 7-58191GB
Large format hydraulic and electrical schematics
(788 crawler excavators) - (before November 1999)................................Pocket 7-80190GB
Large format hydraulic and electrical schematics
(788 wheeled excavators) - (before November 1999) ..............................Pocket 7-80200GB
Large format hydraulic and electrical schematics
(988 crawler excavators) - (before November 1999)................................Pocket 7-58980GB
Large format hydraulic and electrical schematics
(988 wheeled excavators) - (before November 1999) ..............................Pocket 7-58970GB
Large format hydraulic and electrical schematics
(788 Pus crawler excavators) - (November 1999 and after).....................Pocket 7-26730GB
Large format hydraulic and electrical schematics
(788 Plus wheeled excavators) - (November 1999 and after) ..................Pocket 7-26760GB
Large format hydraulic and electrical schematics
(988 Plus crawler excavators) - (November 1999 and after)....................Pocket 7-26770GB
Large format hydraulic and electrical schematics
(988 Plus wheeled excavators) - (November 1999 and after) ..................Pocket 7-26780GB
5. 1001-3
Cre 7-56942GB Issued 11-99
SAFETY
To avoid all risks, always follow the safety notes con-
tained in this section and throughout this manual.
Put the warning tag shown below on the key for the
keyswitch when servicing or repairing the machine.
One warning tag is supplied with each machine.
Additional tags, Part Number 321-4614, are available
from your service parts supplier.
PDG0328
WARNING: This symbol means WARNING ! BE VIGILANT ! YOUR SAFETY IS AT RISK. The message
that follows the symbol contains important safety information. Read it carefully. Be sure you understand
the possible risks of injury or even death.!
WARNING: Read the Operator’s Manual
carefully and make sure you understand how
to operate the controls correctly.
WARNING: Never operate the machine and
attachment controls unless you are seated in
the operator’s seat. If you are not in the
operator’s seat, you run the risk of serious
injury.
WARNING: The machine is built to carry the
operator only. Do not allow passengers to
ride on the machine.
!
!
!
WARNING : Prior to starting up the engine
read the safety messages contained in the
operator’s manual carefully. Read all safety
stickers on the machine. Have people move
back from the machine. Learn how to use the
controls before starting up the machine. It is
your responsibility to follow the manufacturer’s
instructions on how to operate and maintain
the machine. It is your responsibility to follow
applicable rules and regulations. Service and
Operator’s Manuals are available from your
J.I. Case Dealer.
WARNING: If you wear loose clothing or if
you omit to use safety equipment for your
work, you risk injury. Always wear clothes
that do not risk getting caught in the
machine. Other safety equipment may be
necessary, in particular : helmets, safety
shoes, ear plugs, safety glasses, protection
mask, thick gloves and reflecting clothes.
WARNING: When working close to the fan
with the engine running, avoid wearing loose
clothing and operate with extreme caution.
WARNING: When checking the hydraulic cir-
cuits, follow procedures to the letter. DO
NOT CHANGE procedures.
!
!
!
!
6. 1001-4
Cre 7-56942GB Issued 11-99
WARNING: Prior to operating the hydraulic
cylinders of this machine for setting or to
bleed the circuit, have all people standing
around the machine move away.
WARNING: Wear gloves or insulated mittens
when working on hot parts.
WARNING: Lower all attachments to the
ground or rest them on stands before carry-
ing out maintenance jobs.
WARNING: Fine sprays of hydraulic oil
under pressure can penetrate the skin and
cause serious infection. If hydraulic oil under
pressure penetrates the skin, see a doctor
immediately. Maintain all hoses and pipes in
good condition. Make sure that all connec-
tions are properly tightened. Change all
hoses or pipes that have been damaged or
that are suspect. DO NOT CHECK for leaks
with bare hands. Use a piece of cardboard
or wood.
WARNING: To remove a hardened pin such
as a pivot pin, or a hardened shaft, use a
soft head hammer (brass or bronze) or a
brass or bronze strip and a steel head ham-
mer.
WARNING: When using a hammer to
remove or reassemble pivot pins, or when
using compressed air, or when using a
grinder make sure to wear safety glasses
that protect the eyes from all sides.
WARNING: Use proper lifting/hoisting equip-
ment to lift wheels or tracks and always work
on safe ground. Prevent the machine from
moving using correct safety chocks.
!
!
!
!
!
!
!
WARNING: When performing maintenance
or repair operations on the machine, make
sure that the work shop floor, the cab and
the steps of the excavator are free from oil,
water, grease, tools etc. Use oil absorbing
material or rags as necessary. Always think
safety.
WARNING: Certain components of this
machine are very heavy. Use hoisting tools
or additionnal assistance as recommended
in this manual.
WARNING: Exhaust fumes can cause death.
If it is necessary to start up the engine in a
closed building, evacuate exhaust fumes
using an exhaust pipe extension. Open the
doors and let fresh air into the building.
WARNING: When battery liquid is frozen,
the battery can explode if : (1) you try to
charge the battery or (2) you try to start the
engine by connecting an auxiliary power
source. To prevent battery electrolyte from
freezing keep the battery fully charged. If
you do not follow these instructions, you or
others nearby may be injured.
WARNING: Batteries contain acid and explo-
sive gases. A spark, a flame or an improper
cable connection may cause an explosion.
For proper connection of cables to the bat-
tery of this machine see the Operator’s Man-
ual. If you do not follow these instructions,
you risk severe injury.
!
!
!
!
!
7. 1001-5
Cre 7-56942GB Issued 11-99
TWIN WHEELS
Safety rules Safety instructions
• Use appropriate, good quality tools to disassemble
the various wheel components. Never use a ham-
mer. Use a rubber, plastic or copper-faced mallet.
IMPORTANT: Never remove the inner tyre valve
extension, as this will be necessary afterwards for
inflating and deflating the tyre.
IMPORTANT: If the valve or the valve extension are
no longer accessible, take the necessary precautions
and then, imperatively, puncture the tyre.
• Use suitable grease to facilitate the installation and
removal of the tyre.
• Never re-inflate a tyre on the machine which has
been used at a pressure lower than 5.6 bar.
• Check the various components: tyre, rim, shoulder,
retaining ring and replace any defective items.
• Never reuse a retaining ring which is distorted or
rusty.
WARNING: In all cases, before removing twin
wheels, always deflate both tyres completely.
WARNING: If a tyre bursts it can cause seri-
ous injury. Check tyres regularly to see that
they are in good condition and always be sure
to inflate them to the correct pressure.
WARNING: Never face a tyre when checking
pressure or adding air. Always stand in front of
the tread. Use an inflation cage if the wheel
has been removed from the machine. Make
sure all people standing in the area move well
away.
WARNING: Never weld near a tyre.If this can
not be avoided, it is mandatory to remove the
tyre before performing any welding operations.
WARNING: Make sure that all decals on the
machine are perfectly legible, clean them regu-
larly and replace any decals which are dam-
aged, missing or painted over, with new ones.
!
!
!
!
!
8. 1001-6
Cre 7-56942GB Issued 11-99
GENERAL INFORMATION
CLEANING
Clean all metal parts except bearings with white spirit
or steam. Do not use caustic soda when steam
cleaning. After cleaning, dry and lubricate all parts.
Clean hydraulic lines with compressed air. Clean
bearings with kerosene, then dry them and lubricate
them.
INSPECTION
Check all parts when disassembled. Change all parts
showing wear or damage. Scratches that are not too
deep can be removed by honing or with a rag dipped
into buffing compound. A full visual inspection to
detect wear and pitting and subsequent changing of
parts will prevent premature failure.
BEARINGS
Check that bearings rotate freely. If their adjustment
is too loose or if they do not run regularly, change
them. Wash bearings with a good solvent or kero-
sene and let them dry. DO NOT DRY BEARINGS
WITH COMPRESSED AIR.
NEEDLE BEARINGS
Before inserting needle bearings into a bore, remove
all metal particles from the edge of the bore. Prior to
mounting bearings with a press, coat the inside and
the outside of the bearing with vaseline.
GEARS
Check all the gears for wear or damage. Change
worn or damaged gears.
SEAL RINGS, O-RINGS, GASKETS
Always use new seal rings. O-rings and gaskets.
Coat sealing rings and O-rings with vaseline.
SHAFTS
Check all shafts showing signs of wear or damage.
Check that the surface of a shaft running in a bearing
is not damaged.
SPARE PARTS
Always use original CASE spare parts. To order
spare parts, see the Spare Parts Catalogue to indi-
cate the proper reference of original CASE spare
parts. Failures caused by the use of parts that are not
original CASE spare parts are not covered by the
warranty.
LUBRICATION
Use only oils and lubricants specified in the Opera-
tor’s and Service Manuals. Failures due to the use of
oils and lubricants not specified are not covered by
the warranty.
10. 2002-2
Cre 7-58681GB Issued 09-96 Printed in U.K.
TABLE OF CONTENTS
SPECIFICATION ..................................................................................................................................................... 2
SPECIAL TORQUES............................................................................................................................................... 2
TOOLS REQUIRED ................................................................................................................................................2
Removal and installation .....................................................................................................................................3
SPECIFICATION
Weights :
Engine, (without hydraulic pump)
788 Model............................................................................................................................................... 350 kg
988 Model............................................................................................................................................... 443 kg
High pressure hydraulic pump
788 Model............................................................................................................................................... 100 kg
988 Model............................................................................................................................................... 130 kg
Upper hood :
788 Model................................................................................................................................................. 26 kg
988 Model................................................................................................................................................. 43 kg
Capacity :
Complete cooling system
788 Model.......................................................................................................................................... 14.5 litres
988 Model............................................................................................................................................. 20 litres
Lubricants and coolant .................................................................................................................(see Section 1002)
SPECIAL TORQUES
Engine/hydraulic pump retaining screws......................................................................................................... 44 Nm
Fan retaining screws ....................................................................................................................................... 44 Nm
Splined sleeve retaining screws .................................................................................................................... 120 Nm
Shock absorber centering lug retaining screws............................................................................................. 220 Nm
Engine support retaining screws ........................................................................................................ 217 to 271 Nm
TOOLS REQUIRED
1 1 torque wrench (10 to 15 Nm)
2 1 torque wrench (40 to 200 Nm)
3 1 torque wrench (70 to 360 Nm)
4 1 sling (400 to 600 kg)
5 2 slings (150 to 200 kg)
6 1 receptacle (30 litres)
7 1 plugging spigot length 100 mm diameter 27 mm
8 1 Loctite 638
This symbol is used in this manual to indicate important safety messages. When ever you see this sym-
bol, carefully read the message that follows, as there is a risk of serious injury.
11. 2002-3
Cre 7-58681GB Issued 09-96 Printed in U.K.
Before performing any service work on a machine, the following steps must be carried out in the order shown :
- Park the machine on hard, flat ground.
- Lower the attachment to the ground.
- Stop the engine and let it cool down.
- Turn the battery master switch to the “OFF” position and remove the key.
Removal and installation
When the machine is running, the engine components and the hydraulic pump reach a high temperature.
To avoid being burnt by hot metal or scalded by high temperature water or oil, let the machine cool down
before beginning any service operation.
STEP 1 788 Model
988 Model
Disconnect the negative cable (1) first and then the
other cables.
STEP 2
Remove the access panels located under the engine.
PG02234
1
PG03613
1
STEP 3
Remove the exhaust silencer outlet tube.
NOTE : When installing, make sure that the exhaust
outlet is pointing towards the rear.
STEP 4
Remove the upper hood using a suitable lifting
device.
STEP 5
Remove the side panel on the walkway side.
STEP 6
Remove the exhaust silencer and its bracket.
STEP 7
(788 Model)
Remove the hose connecting the turbo charger to the
air filter.
(988 Model)
Remove the hose connecting the air filter to the turbo
charger, disconnect the air filter restriction pressostat
(see item (7) Step 11) and remove the air filter.
12. 2002-4
Cre 7-58681GB Issued 09-96 Printed in U.K.
STEP 8 788 Model
Disconnect the connector (1) from the speed detector
(2).
STEP 9 788 Model
Disconnect the electrical supply (1) from the propor-
tional pressure reducing valve DRE4 (2).
STEP 10 988 Model
Disconnect the electrical supply (1) from the propor-
tional pressure reduction valve DRE4 (2) and the
connector (3) from the speed detector (4).
CD96D002
2
1
2
1
CK96F001
CD96A008
4
3
2 1
STEP 11
Disconnect the wires and electrical harnesses con-
nected to the engine.
1 Engine oil pressure pressostat.
2 Engine coolant solution temperature sender.
3 Engine cut-out solenoid valve.
4 Alternator (see Section 4003), for wiring dentifica-
tion.
5 Sarter motor (see Section 4004), for wiring dentifi-
cation.
6 Earthing strap.
7 Air filter restriction pressostat
PDG0416
788 Model
1
4
2
3
5
6
PDG0415
988 Model
1
2
3
4
5
6
7
13. 2002-5
Cre 7-58681GB Issued 09-96 Printed in U.K.
STEP 12
Disconnect the connector (1) from the servo-motor
(2) and the connector (3) from the injection pump (4).
STEP 13
Remove the expansion reservoir cap.
NOTE : Do not remove the cap when the engine is
hot. The system is still under pressure and you risk
being scalded.
CD96A009
1
2
3
4
PG02824A
STEP 14
Move the heating lever to the left.
STEP 15
Remove the lower tray under the operator’s compart-
ment. Place a receptacle of about 30 litres under-
neath and then disconnect the hose (1) from the
heating system and allow the coolant solution to flow
out.
PG01706
PE07509
1
14. 2002-6
Cre 7-58681GB Issued 09-96 Printed in U.K.
STEP 16
Disconnect, label and remove the cooling system
hoses from the engine in numerical order.
NOTE : When installing, make sure that the system
hoses are clean.
1 Overflow hose
2 Engine gas evacuation hose
3 Radiator gas evacuation hose
4 Engine/radiator return hose
5 Pump/radiator inlet hose
6 Coolant solution supply hose
7 Expansion reservoir
PDG0407
788 Model
1
2
3
7
6
4
5
PDG0410
988 Model
7 2
1
3
4
5
6
5
STEP 17
Disconnect heating system hoses (1) and (2) from
the engine.
PDG0412
788 Model
1
2
PDG0411
988 Model
2
1
15. 2002-7
Cre 7-58681GB Issued 09-96 Printed in U.K.
STEP 18
Disconnect the fuel supply pipe (1) and plug it. Dis-
connect the fuel return pipe (2) and plug it.
NOTE : When installing, change the filter (3).
STEP 19
Remove the fan guard fastening hardware and
remove the guard.
STEP 20 788 Model
Remove and plug the hydraulic fluid return hose to
gain access to the shroud retainers.
NOTE : Refer to “Tools required” on page 2 for plug-
ging the hydraulic fluid return hose.
PDG0409
2
3
1
PE06825
PG02824B
STEP 21
Remove the shroud fastening hardware and move
the shroud towards the engine to gain access to the
fan retaining screws.
STEP 22
Remove the four fan retaining screws and remove
the fan and spacer. Remove the fan shroud.
NOTE : When installing, the fan shroud should be
installed resting on the engine. Install spacer and the
fan and then tighten the screws to a torque of 44 Nm.
PE10104
PE10105
16. 2002-8
Cre 7-58681GB Issued 09-96 Printed in U.K.
STEP 23
Attach a suitable lifting device to the engine lifting
eyes.
Weight of engine :
788 Model................................................... 350 kg
988 Model................................................... 443 kg
STEP 24
Using a suitable sling, support the hydraulic pump so
as to keep it in place during the removal of the
engine.
STEP 25
Remove the hydraulic pump fastening hardware.
NOTE : When installing, tighten the hydraulic pump
retaining screws to a torque of 44 Nm.
B20308
C24000
C24000A
NOTE : (788 Model), When installing, the pressure
control hose and its bracket must be installed.
STEP 26
Remove the nuts (1), the washers (2) and remove the
screws (3) and the thrust washers (4).
NOTE : When installing, make a visual check of the
condition of the rubber spacers (5). Replace them
with new spacers if necessary. Tighten the engine
bearer retaining screws to a torque of 217 to 271 Nm.
STEP 27
Carefully lift the engine. Move it towards the radiator
until it is disengaged from the pump coupling. When
there is nothing to prevent the removal of the engine,
install it on a suitable repair bench.
PDG0413
788 Model
1
2
3
4
5
1
2
3
4
5
5
5
PDG0414
988 Model
1
2
3
5
5
4
1
2
5
5
4
3
17. 2002-9
Cre 7-58681GB Issued 09-96 Printed in U.K.
STEP 28
Remove the flexible coupling (1). Check the wear and
general condition of the coupling and replace it by a
new coupling if necessary.
STEP 29
Remove the screws (1) and remove the centering
lugs (2). Make a visual check of the wear and general
condition of the centering lugs and replace them if
necessary.
NOTE :
When installing, apply Loctite 638 on the screws,
position the centering lugs correctly, and tighten the
screws to a torque of 220 Nm.
B20402
1
B20404
2
1
PDG0419
INCORRECT CORRECT
NOTE : If it is necessary due to wear to replace the
flexible coupling and the centering lugs, the splined
sleeve should also be replaced.
Remove the splined sleeve (1) from the hydraulic
pump. Replace it if necessary.
NOTE : When installing the splined sleeve (1), install
the splined sleeve on the pump shaft. The splined
sleeve should be pushed fully home against the
pump shaft shoulder. Tighten the retaining screws (2)
to a torque of 100 Nm.
NOTE : When installing the engine, proceed in the
reverse order to that used for the removal.
Before using the machine, perform all the follow-
ing operations :
- Fill the cooling system (see Operators Manual).
- Turn the battery master switch to the “ON” position.
- Bleed and prime the fuel circuit (see Operators
Manual).
- Check that the engine oil pressure warning lamp
goes out when the engine is running.
- Adjust the engine speed detector if it has been
removed. See Section 4002.
- Calibrate the servo-motor if it has been removed.
See Section 4002.
- Bleed the cooling system (see Operator’s Manual).
- Check the hydraulic system, fuel system and
cooling system for leaks.
- Stop the engine and check all levels. Top up if
necessary.
C18226
1
2
18.
19. Case
Copyright 1999 Case France
Printed in France
November 1999Cre 7-26560GB
2002
ENGINE REMOVAL AND INSTALLATION
Section
2002
20. 2002-2
Cre 7-26560GB Issued 11-99
TABLE OF CONTENTS
SPECIFICATIONS ...................................................................................................................................................2
SPECIAL TORQUES ...............................................................................................................................................2
TOOLS REQUIRED ................................................................................................................................................2
Remove and install ..............................................................................................................................................3
SPECIFICATIONS
Weights :
Engine (without hydraulic pump)................................................................................................................. 350 kg
High pressure hydraulic pump ................................................................................................................... 100 kg
Upper hood ................................................................................................................................................... 26 kg
Total cooling system capacity................................................................................................................. 14.5 litres
Lubricant and coolant solution...................................................................................................... (see section 1002)
SPECIAL TORQUES
Engine/hydraulic pump retaining screws......................................................................................................... 44 Nm
Fan retaining screws ....................................................................................................................................... 44 Nm
Splined sleeve retaining screws .................................................................................................................... 120 Nm
Shock absorber centring stud retaining screws............................................................................................. 220 Nm
Engine bracket retaining screws......................................................................................................... 217 to 271 Nm
TOOLS REQUIRED
1 1 torque wrench (10 to 50 Nm)
2 1 torque wrench (40 to 200 Nm)
3 1 torque wrench (70 to 360 Nm)
4 1 sling (400 to 600 kg)
5 2 slings (150 to 200 kg)
6 1 receptacle (30 litres)
7 1 Loctite 638
This symbol is used in this manual to indicate important safety messages. Whenever you see this
symbol, carefully read the message that follows, as there is a risk of serious injury.
21. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
22. 2002-3
Cre 7-26560GB Issued 11-99
Before carrying out any servicing on the machine, perform the following operations in the order shown:
- Park the machine on flat, hard ground.
- Lower the attachment to the ground.
- Shut down the engine and allow it to cool down.
- Place the batter master switch in the "OFF" position and remove the key.
Removal and installation
When the machine is operating, the engine and hydraulic pump reach high temperatures. To avoid being
burnt by hot metal or scalded by high temperature oil or water, allow the machine to cool down before
starting any servicing operation.
STEP 1
PG02234
Remove the sound-proofing plate, disconnect the
negative cable (1) first, then disconnect the other
cables.
STEP 2
Remove the access panels located under the engine.
1
STEP 3
Remove the exhaust silencer outlet pipe.
NOTE: When installing, make sure that the exhaust
outlet is oriented rearwards.
STEP 4
Remove the upper hood using suitable lifting
equipment.
STEP 5
Remove the side hood, at the walkway end.
STEP 6
Remove the exhaust silencer and its bracket.
STEP 7
Remove the hose connecting the air filter to the
turbo-charger, disconnect the air filter restriction
pressure switch harness (see item (6) Step 9), then
remove the air filter.
23. 2002-4
Cre 7-26560GB Issued 11-99
STEP 8
CD99H002
Disconnect the speed detector (2) connector (1).
STEP 9
CI99H501
Disconnect the electrical wires and harnesses
connected to the engine.
1 Engine oil pressure switch
2 Engine coolant solution temperature sender
3 Alternator, see section 4003 for wire identification
4 Starter motor, see section 4004 for wire
identification
5 Earthing braid
6 Air filter restriction pressure switch
1
2
1
2
3
4
5
6
STEP 10
CD99H003
Disconnect the connector (1) from the servo-motor
(2) and the connector (3) from the injection pump (4).
STEP 11
Remove the expansion reservoir cap.
NOTE: Do not remove the cap when the engine is
hot, since the system would still be under pressure
and you could be scalded.
STEP 12
CD99H004
Turn the heater lever to the left.
1
2
3
4
3
1 2
4
24. 2002-5
Cre 7-26560GB Issued 11-99
STEP 13
CD99H005
Remove the lower tray under the operator’s
compartment. Position a receptacle of about 30 litres
capacity, then disconnect the hose (1) from the
heater unit and allow the coolant solution to drain out.
STEP 14
PDG0407
Disconnect, label, then remove the engine cooling
system hoses in numerical order.
NOTE: When installing, make sure that the system
hoses are clean.
1 Overflow hose
2 Engine gas relief hose
3 Radiator gas relief hose
4 Engine/radiator return hose
5 Pump/radiator inlet hose
6 Coolant solution supply hose
7 Expansion reservoir
PE07509
1
1
1
2
3
7
6
4
5
STEP 15
CI99H502
At the engine, disconnect the hoses (1) and (2) from
the heater system.
STEP 16
CD99H003
Disconnect the fuel supply pipe (1) and plug it.
Disconnect the fuel return pipe (2) and plug it.
1
2
PDG0409
2
3
1
2
1
25. 2002-6
Cre 7-26560GB Issued 11-99
STEP 17
CD99H006
Remove the fan protective grille retaining hardware,
then remove the grille.
STEP 18
CD99H007
Remove the fan shroud retaining hardware then
move the shroud towards the engine to gain access
to the fan retaining screws.
PE06825
PE10104
STEP 19
CD99H008
Remove the four fan retaining screws, then remove
the fan and the spacer. Remove the fan shroud.
NOTE: When installing, assemble the fan shroud by
resting it on the engine. Assemble the spacer and the
fan then tighten the screw to a torque of 44 Nm.
STEP 20
CI99H503
Install suitable lifting equipment on the engine lifting
eyes.
Engine weight: 350 kg
STEP 21
Using a suitable sling, support the hydraulic pump to
hold it in position when removing the engine.
26. 2002-7
Cre 7-26560GB Issued 11-99
STEP 22
CD99H002
Remove the hydraulic pump retaining hardware.
NOTE: When installing, tighten the hydraulic pump
retention screws to a torque of 44 Nm.
NOTE: When installing, install the bracket for the
pressure control hose and the proportional pressure
reducing valve DRE 4.
STEP 23
PDG0413
Remove the nuts (1), the washers (2) then remove
the screws (3) and the thrust washers (4).
NOTE: When installing, make a visual check of the
condition of the rubber spacers (5), replace them if
necessary, tighten the engine bracket retaining
screws to a torque of 217 to 271 Nm.
C24000A
1
2
3
4
5
1
2
3
4
5
5
5
STEP 24
Carefully raise the engine and move it towards the
radiator until it is clear of the pump coupling. When
there is nothing to prevent the engine being removed,
lift the engine and install it on a suitable repair bench.
STEP 25
B20402
Remove the flexible coupling (1), check it visually for
wear and condition and replace it if necessary.
STEP 26
B20404
Remove the screws (1) then remove the centring
studs (2). Check the centring studs for wear and
condition and replace them if necessary.
1
2
1