This document is a service manual for a 521F Tier 4B wheel loader. It provides information on the loader's engine, transmission, axles, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. The manual is intended only for qualified dealership personnel to use when performing repairs and maintenance. All work must be done according to the procedures in this manual using approved parts, and unauthorized work may void warranties.
Case wx218 wheeled excavator service repair manual instant downloadufjjsjekkemmme
1. The document is a service manual that provides instructions for servicing various components of a Wheeled Excavator, including the engine, transmission, hydraulics, electrical systems, and more.
2. It includes sections on removing, installing, and replacing parts like air intake lines, air cleaner supports, and fuel filters. Detailed steps and torque specifications are provided.
3. Safety warnings are provided throughout instructing technicians to follow proper safety procedures and switch off the engine before working on it.
Case wx218 wheeled excavator service repair manualfdjjjsekkskemm
The document is a service manual for a WX218 wheeled excavator. It contains sections on the engine, transmission, four-wheel drive system, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, booms, dippers and buckets, dozer blade and arm, and the platform, cab, bodywork and decals. The manual provides removal and installation instructions for components with references to specific section numbers for more details.
Case cx210 d lc version (tier4 final) crawler excavator service repair manual...ufjjsjdkkskem
This document is a service manual for the CX210D Crawler Excavator. It provides maintenance and repair instructions for the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. The manual emphasizes that all repair and maintenance work must only be performed by qualified dealership personnel using the specified tools and procedures.
Case cx250 d, cx250d long reach lc version tier 4b (final) crawler excavator ...jfjkskekemm
This document provides service information for CX250D Crawler excavators including:
- Specifications and component information for the excavator's engine, cooling system, electrical system, and other systems.
- Sections covering maintenance and repair of engine components like the crankcase, cylinder heads, fuel system, and more.
- Additional chapters related to hydraulics, frames, tracks, climate control, electrical wiring, attachments, cab components, and fault codes.
Case cx210 d crawler excavator service repair manualdfujsjefjkskemm
This document is a service manual for the CX210D Crawler Excavator. It provides maintenance and repair instructions for the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. The manual emphasizes that all repair and maintenance work must only be performed by qualified dealership personnel using the specified tools and procedures.
New holland 9090 x grape harvester service repair manualfusjjefjkskemem
The document provides service information for a 9090X grape harvester. It includes sections on the engine and various harvester systems. The engine section describes the engine frame, which supports components like the radiators and emission control systems. It also details items like the servo belt, flex disc, and pumps connected to the engine.
Case cx250 d crawler excavator service repair manualfusjejfjsekfkem
This document is a service manual that provides specifications and repair instructions for the engines in CX250D Crawler excavators. It includes sections on the engine and crankcase, cooling system, electrical system, fuel system, lubrication system, and other engine components. The manual provides detailed specifications for the engine, generator, starter, cooling and electrical systems to aid technicians in servicing and repairing the engine.
CASE 521F Tier 4B (final) Wheel Loader Service Repair Manual.pdffujskekmdmd
This document provides a service manual for removing the engine from a 521F wheel loader. Key steps include draining fluids, disconnecting batteries, and using lifting straps through the exhaust stack to raise the hood. Safety precautions are outlined and tools are specified to avoid damaging emission sensors during removal.
Case wx218 wheeled excavator service repair manual instant downloadufjjsjekkemmme
1. The document is a service manual that provides instructions for servicing various components of a Wheeled Excavator, including the engine, transmission, hydraulics, electrical systems, and more.
2. It includes sections on removing, installing, and replacing parts like air intake lines, air cleaner supports, and fuel filters. Detailed steps and torque specifications are provided.
3. Safety warnings are provided throughout instructing technicians to follow proper safety procedures and switch off the engine before working on it.
Case wx218 wheeled excavator service repair manualfdjjjsekkskemm
The document is a service manual for a WX218 wheeled excavator. It contains sections on the engine, transmission, four-wheel drive system, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, booms, dippers and buckets, dozer blade and arm, and the platform, cab, bodywork and decals. The manual provides removal and installation instructions for components with references to specific section numbers for more details.
Case cx210 d lc version (tier4 final) crawler excavator service repair manual...ufjjsjdkkskem
This document is a service manual for the CX210D Crawler Excavator. It provides maintenance and repair instructions for the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. The manual emphasizes that all repair and maintenance work must only be performed by qualified dealership personnel using the specified tools and procedures.
Case cx250 d, cx250d long reach lc version tier 4b (final) crawler excavator ...jfjkskekemm
This document provides service information for CX250D Crawler excavators including:
- Specifications and component information for the excavator's engine, cooling system, electrical system, and other systems.
- Sections covering maintenance and repair of engine components like the crankcase, cylinder heads, fuel system, and more.
- Additional chapters related to hydraulics, frames, tracks, climate control, electrical wiring, attachments, cab components, and fault codes.
Case cx210 d crawler excavator service repair manualdfujsjefjkskemm
This document is a service manual for the CX210D Crawler Excavator. It provides maintenance and repair instructions for the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. The manual emphasizes that all repair and maintenance work must only be performed by qualified dealership personnel using the specified tools and procedures.
New holland 9090 x grape harvester service repair manualfusjjefjkskemem
The document provides service information for a 9090X grape harvester. It includes sections on the engine and various harvester systems. The engine section describes the engine frame, which supports components like the radiators and emission control systems. It also details items like the servo belt, flex disc, and pumps connected to the engine.
Case cx250 d crawler excavator service repair manualfusjejfjsekfkem
This document is a service manual that provides specifications and repair instructions for the engines in CX250D Crawler excavators. It includes sections on the engine and crankcase, cooling system, electrical system, fuel system, lubrication system, and other engine components. The manual provides detailed specifications for the engine, generator, starter, cooling and electrical systems to aid technicians in servicing and repairing the engine.
CASE 521F Tier 4B (final) Wheel Loader Service Repair Manual.pdffujskekmdmd
This document provides a service manual for removing the engine from a 521F wheel loader. Key steps include draining fluids, disconnecting batteries, and using lifting straps through the exhaust stack to raise the hood. Safety precautions are outlined and tools are specified to avoid damaging emission sensors during removal.
Case cx250 d, cx250d long reach lc version tier 4b (final) crawler excavator ...fjjskekfsem
This document is a service manual that provides specifications and repair instructions for the engine and related components of Case CX250D crawler excavators. It includes detailed sections on the engine and crankcase, cooling system, fuel system, electrical system, lubrication system, and exhaust system. The manual aims to guide qualified service personnel on maintenance, repairs, and component replacements according to the manufacturer's guidelines.
Case cx250 d, cx250d long reach lc version tier 4b (final) crawler excavator ...fdjjjsekkskemm
This document is a service manual for Case CX250D crawler excavators with Tier 4B engines. It contains sections covering the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab bodywork and decals. Repair and maintenance should only be performed by qualified dealership personnel using the procedures in the manual. The manufacturer will not be responsible for damages caused by unapproved parts or components.
CASE CX210D Crawler Excavator Service Repair Manual.pdffujsekdmmdm
This document is a service manual for CX210D Crawler excavators. It provides maintenance and repair instructions for the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. The manual includes detailed sections on the excavator's engine systems, including the engine and crankcase, cylinder heads, pistons, crankshaft, fuel system, air intake and exhaust systems, cooling system, and lubrication system. It also includes sections on the excavator's hydraulic systems and electrical systems.
CASE CX250D LC Version Tier 4B (final) Crawler Excavator Service Repair Manua...gongyi2122252
This document is a service manual for Case CX250D crawler excavators with Tier 4B engines. It contains sections covering the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab bodywork and decals. Each section includes subsections for specific components and systems. The manual provides repair and maintenance instructions that should only be performed by qualified dealership personnel using the recommended special tools.
CASE CX250D LC Version Tier 4B (final) Crawler Excavator Service Repair Manua...sang1818141471
This document is a service manual for Case CX250D crawler excavators with Tier 4B engines. It contains sections covering the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab bodywork and decals. Repair and maintenance should only be performed by qualified dealership personnel using the procedures in the manual. The manufacturer will not be responsible for damages caused by unapproved parts or components.
CASE CX250D LC Version Tier 4B (final) Crawler Excavator Service Repair Manua...naoji181714047
This document is a service manual for Case CX250D crawler excavators with Tier 4B engines. It contains sections covering the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab bodywork and decals. Repair and maintenance should only be performed by qualified dealership personnel using the procedures and special tools described. The manufacturer will not be responsible for damages caused by unapproved parts or components used in servicing or repairs.
CASE CX250D, CX250D Long Reach LC Version Tier 4B (final) Crawler Excavator S...fujsekdmmdm
This document is a service manual that provides specifications and repair instructions for CX250D crawler excavators. It contains sections on the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers and buckets, platform, cab bodywork and decals. The engine section provides detailed specifications and component level repair instructions for the excavator's engine, including the crankcase, cylinder heads, fuel system, cooling system, lubrication system and electrical charging and starting systems.
Case cx210 d long reach lc long reach (tier4 final) crawler excavator service...ufjjsjdkkskem
This document is a service manual for the CX210D Crawler Excavator. It provides maintenance and repair instructions for the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. The manual emphasizes that all repair and maintenance work must only be performed by qualified dealership personnel using the specified tools and procedures.
Case cx210 d long reach lc version tier 4b (final) crawler excavator service ...dfujsjefjkskemm
This document is a service manual for CX210D Crawler excavators. It provides part numbers, specifications, and repair/maintenance instructions for the engine, hydraulic systems, frames/ballasting, tracks/suspension, climate control, electrical systems, attachments, cab/bodywork, and fault codes. The manual includes an introduction and table of contents to guide users to the relevant sections.
Case cx210 d long reach lc version tier 4b (final) crawler excavator service ...ufjsekksmemm
This document is a service manual for CX210D Crawler excavators. It provides part numbers, specifications, and repair/maintenance instructions for the engine, hydraulic systems, frames/ballasting, tracks/suspension, climate control, electrical systems, attachments, cab/bodywork, and fault codes. The manual includes an introduction and detailed sections for the engine systems, including the crankcase, cylinder heads, fuel system, cooling system, lubrication system, and electrical components.
Case cx210 d nlc version (tier4 final) crawler excavator service repair manua...ufjjsjdkkskem
This document is a service manual for Case CX210D crawler excavators. It provides part numbers, specifications, and repair/maintenance instructions for the excavator's engine, hydraulic systems, frames/ballasting, tracks/suspension, climate control, electrical systems, attachments, cab/bodywork, and fault codes. The manual contains detailed sections on the engine components, cooling and fuel systems, and electrical components. It is intended to guide qualified service personnel in servicing and repairing components of the excavator.
Case cx210 d crawler excavator service repair manualfujjsefkskemme
This document is a service manual for the CX210D Crawler Excavator. It provides maintenance and repair instructions for the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. The manual emphasizes that all repair and maintenance work must only be performed by qualified dealership personnel using the specified tools and procedures.
Case cx210 d long reach lc version tier 4b (final) crawler excavator service ...fujjsefkskemme
This document is a service manual for the CX210D Crawler Excavator. It provides maintenance and repair instructions for the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. The manual emphasizes that all repair and maintenance work must only be performed by qualified dealership personnel using the specified tools and procedures.
Case cx210 d crawler excavator service repair manualufjsekksmemm
This document is a service manual for the CX210D Crawler Excavator. It provides maintenance and repair instructions for the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. The manual emphasizes that all repair and maintenance work must only be performed by qualified dealership personnel using the specified tools and procedures.
Case cx210 d long reach lc version tier 4b (final) crawler excavator service ...fjjskekksemmm
This document is a service manual that provides specifications and repair/maintenance instructions for CX210D crawler excavators. It includes sections on the engine and related systems, hydraulic systems, frames and ballasting, tracks and suspensions, cab climate control, electrical systems, work equipment, platform/cab components, and fault codes. The document contains detailed part numbers, diagrams, specifications, and repair steps to guide maintenance and repairs of the excavators.
Case cx210 d crawler excavator service repair manualfjjskekksemmm
This document is a service manual for the CX210D Crawler Excavator. It provides maintenance and repair instructions for the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. The manual instructs only qualified dealership personnel to perform repairs, using special tools whenever possible. It warns that the manufacturer is not responsible for damages caused by unapproved replacement parts.
CASE WX218 Wheeled Excavator Service Repair Manual Instant Download.pdfbu9525858114
This document is a service manual for the WX218 Wheeled Excavator. It contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, booms, dippers and buckets, dozer blade and arm, and the platform, cab, bodywork and decals. The manual stresses that repair and maintenance work should only be carried out by qualified dealership personnel using the specified procedures and tools.
CASE WX218 Wheeled Excavator Service Repair Manual Instant Download.pdfjiuliu14811471
1. The document is a service manual that provides instructions for servicing various components of a Wheeled Excavator, including the engine, transmission, hydraulics, electrical systems, and more.
2. It includes sections on the air intake system, fuel filters, and other engine components with procedures for removal, installation, and replacement of parts.
3. The manual also covers systems like the transmission, hydraulics, electrical, frames, and attachments with the excavator and provides maintenance instructions.
CASE WX218 Wheeled Excavator Service Repair Manual Instant Download.pdfidklskddmmd
1. The document is a service manual that provides instructions for servicing various components of a Wheeled Excavator, including the engine, transmission, hydraulics, electrical systems, and more.
2. It includes sections on removing, installing, and replacing parts like air intake lines, air cleaner supports, and fuel filters. Detailed steps and torque specifications are provided.
3. Safety warnings are provided throughout instructing technicians to follow proper safety procedures and switch off the engine before working on it.
CASE WX218 Wheeled Excavator Service Repair Manual Instant Download.pdfbugukua0303629
1. The document is a service manual that provides instructions for servicing various components of a Wheeled Excavator, including the engine, transmission, hydraulics, electrical systems, and more.
2. It includes sections on removing, installing, and replacing parts like air intake lines, air cleaner supports, and fuel filters. Detailed steps and torque specifications are provided.
3. Safety warnings are provided throughout instructing technicians to follow proper safety procedures and switch off the engine before working on equipment.
Caterpillar cat d8 l track type tractor dozer bulldozer (prefix 7jc) service ...fjjskkemsmee
This document provides instructions for removing and installing a torque divider on a Caterpillar D8L track-type tractor. It describes in 22 steps how to disassemble the torque divider by removing components like the planet carrier, shafts, gears, seals and housing. It then describes in 51 steps the reverse process of assembling the torque divider, including pressing bearings into place and installing seals, gears and other components back into the housing. The overall document provides very detailed technical instructions for servicing the torque divider.
Caterpillar cat d8 l track type tractor dozer bulldozer (prefix 4fb) service ...fjjskkemsmee
This document provides instructions for servicing the high-low transmission of a D8L track-type tractor. It describes how to remove and install the transmission, including disconnecting wiring and hoses. It also details how to disassemble and assemble the internal components of the transmission, such as removing clutches, carriers, discs, plates, pistons, gears, seals, and bearings. Precise tooling and procedures are specified to correctly service the transmission.
More Related Content
Similar to Case 521 f tier 4b (final) wheel loader service repair manual
Case cx250 d, cx250d long reach lc version tier 4b (final) crawler excavator ...fjjskekfsem
This document is a service manual that provides specifications and repair instructions for the engine and related components of Case CX250D crawler excavators. It includes detailed sections on the engine and crankcase, cooling system, fuel system, electrical system, lubrication system, and exhaust system. The manual aims to guide qualified service personnel on maintenance, repairs, and component replacements according to the manufacturer's guidelines.
Case cx250 d, cx250d long reach lc version tier 4b (final) crawler excavator ...fdjjjsekkskemm
This document is a service manual for Case CX250D crawler excavators with Tier 4B engines. It contains sections covering the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab bodywork and decals. Repair and maintenance should only be performed by qualified dealership personnel using the procedures in the manual. The manufacturer will not be responsible for damages caused by unapproved parts or components.
CASE CX210D Crawler Excavator Service Repair Manual.pdffujsekdmmdm
This document is a service manual for CX210D Crawler excavators. It provides maintenance and repair instructions for the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. The manual includes detailed sections on the excavator's engine systems, including the engine and crankcase, cylinder heads, pistons, crankshaft, fuel system, air intake and exhaust systems, cooling system, and lubrication system. It also includes sections on the excavator's hydraulic systems and electrical systems.
CASE CX250D LC Version Tier 4B (final) Crawler Excavator Service Repair Manua...gongyi2122252
This document is a service manual for Case CX250D crawler excavators with Tier 4B engines. It contains sections covering the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab bodywork and decals. Each section includes subsections for specific components and systems. The manual provides repair and maintenance instructions that should only be performed by qualified dealership personnel using the recommended special tools.
CASE CX250D LC Version Tier 4B (final) Crawler Excavator Service Repair Manua...sang1818141471
This document is a service manual for Case CX250D crawler excavators with Tier 4B engines. It contains sections covering the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab bodywork and decals. Repair and maintenance should only be performed by qualified dealership personnel using the procedures in the manual. The manufacturer will not be responsible for damages caused by unapproved parts or components.
CASE CX250D LC Version Tier 4B (final) Crawler Excavator Service Repair Manua...naoji181714047
This document is a service manual for Case CX250D crawler excavators with Tier 4B engines. It contains sections covering the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab bodywork and decals. Repair and maintenance should only be performed by qualified dealership personnel using the procedures and special tools described. The manufacturer will not be responsible for damages caused by unapproved parts or components used in servicing or repairs.
CASE CX250D, CX250D Long Reach LC Version Tier 4B (final) Crawler Excavator S...fujsekdmmdm
This document is a service manual that provides specifications and repair instructions for CX250D crawler excavators. It contains sections on the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers and buckets, platform, cab bodywork and decals. The engine section provides detailed specifications and component level repair instructions for the excavator's engine, including the crankcase, cylinder heads, fuel system, cooling system, lubrication system and electrical charging and starting systems.
Case cx210 d long reach lc long reach (tier4 final) crawler excavator service...ufjjsjdkkskem
This document is a service manual for the CX210D Crawler Excavator. It provides maintenance and repair instructions for the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. The manual emphasizes that all repair and maintenance work must only be performed by qualified dealership personnel using the specified tools and procedures.
Case cx210 d long reach lc version tier 4b (final) crawler excavator service ...dfujsjefjkskemm
This document is a service manual for CX210D Crawler excavators. It provides part numbers, specifications, and repair/maintenance instructions for the engine, hydraulic systems, frames/ballasting, tracks/suspension, climate control, electrical systems, attachments, cab/bodywork, and fault codes. The manual includes an introduction and table of contents to guide users to the relevant sections.
Case cx210 d long reach lc version tier 4b (final) crawler excavator service ...ufjsekksmemm
This document is a service manual for CX210D Crawler excavators. It provides part numbers, specifications, and repair/maintenance instructions for the engine, hydraulic systems, frames/ballasting, tracks/suspension, climate control, electrical systems, attachments, cab/bodywork, and fault codes. The manual includes an introduction and detailed sections for the engine systems, including the crankcase, cylinder heads, fuel system, cooling system, lubrication system, and electrical components.
Case cx210 d nlc version (tier4 final) crawler excavator service repair manua...ufjjsjdkkskem
This document is a service manual for Case CX210D crawler excavators. It provides part numbers, specifications, and repair/maintenance instructions for the excavator's engine, hydraulic systems, frames/ballasting, tracks/suspension, climate control, electrical systems, attachments, cab/bodywork, and fault codes. The manual contains detailed sections on the engine components, cooling and fuel systems, and electrical components. It is intended to guide qualified service personnel in servicing and repairing components of the excavator.
Case cx210 d crawler excavator service repair manualfujjsefkskemme
This document is a service manual for the CX210D Crawler Excavator. It provides maintenance and repair instructions for the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. The manual emphasizes that all repair and maintenance work must only be performed by qualified dealership personnel using the specified tools and procedures.
Case cx210 d long reach lc version tier 4b (final) crawler excavator service ...fujjsefkskemme
This document is a service manual for the CX210D Crawler Excavator. It provides maintenance and repair instructions for the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. The manual emphasizes that all repair and maintenance work must only be performed by qualified dealership personnel using the specified tools and procedures.
Case cx210 d crawler excavator service repair manualufjsekksmemm
This document is a service manual for the CX210D Crawler Excavator. It provides maintenance and repair instructions for the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. The manual emphasizes that all repair and maintenance work must only be performed by qualified dealership personnel using the specified tools and procedures.
Case cx210 d long reach lc version tier 4b (final) crawler excavator service ...fjjskekksemmm
This document is a service manual that provides specifications and repair/maintenance instructions for CX210D crawler excavators. It includes sections on the engine and related systems, hydraulic systems, frames and ballasting, tracks and suspensions, cab climate control, electrical systems, work equipment, platform/cab components, and fault codes. The document contains detailed part numbers, diagrams, specifications, and repair steps to guide maintenance and repairs of the excavators.
Case cx210 d crawler excavator service repair manualfjjskekksemmm
This document is a service manual for the CX210D Crawler Excavator. It provides maintenance and repair instructions for the excavator's engine, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, booms, dippers, buckets, platform, cab, bodywork, and decals. The manual instructs only qualified dealership personnel to perform repairs, using special tools whenever possible. It warns that the manufacturer is not responsible for damages caused by unapproved replacement parts.
CASE WX218 Wheeled Excavator Service Repair Manual Instant Download.pdfbu9525858114
This document is a service manual for the WX218 Wheeled Excavator. It contains sections covering the engine, transmission, four-wheel drive system, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, wheels, cab climate control, electrical systems, booms, dippers and buckets, dozer blade and arm, and the platform, cab, bodywork and decals. The manual stresses that repair and maintenance work should only be carried out by qualified dealership personnel using the specified procedures and tools.
CASE WX218 Wheeled Excavator Service Repair Manual Instant Download.pdfjiuliu14811471
1. The document is a service manual that provides instructions for servicing various components of a Wheeled Excavator, including the engine, transmission, hydraulics, electrical systems, and more.
2. It includes sections on the air intake system, fuel filters, and other engine components with procedures for removal, installation, and replacement of parts.
3. The manual also covers systems like the transmission, hydraulics, electrical, frames, and attachments with the excavator and provides maintenance instructions.
CASE WX218 Wheeled Excavator Service Repair Manual Instant Download.pdfidklskddmmd
1. The document is a service manual that provides instructions for servicing various components of a Wheeled Excavator, including the engine, transmission, hydraulics, electrical systems, and more.
2. It includes sections on removing, installing, and replacing parts like air intake lines, air cleaner supports, and fuel filters. Detailed steps and torque specifications are provided.
3. Safety warnings are provided throughout instructing technicians to follow proper safety procedures and switch off the engine before working on it.
CASE WX218 Wheeled Excavator Service Repair Manual Instant Download.pdfbugukua0303629
1. The document is a service manual that provides instructions for servicing various components of a Wheeled Excavator, including the engine, transmission, hydraulics, electrical systems, and more.
2. It includes sections on removing, installing, and replacing parts like air intake lines, air cleaner supports, and fuel filters. Detailed steps and torque specifications are provided.
3. Safety warnings are provided throughout instructing technicians to follow proper safety procedures and switch off the engine before working on equipment.
Similar to Case 521 f tier 4b (final) wheel loader service repair manual (20)
Caterpillar cat d8 l track type tractor dozer bulldozer (prefix 7jc) service ...fjjskkemsmee
This document provides instructions for removing and installing a torque divider on a Caterpillar D8L track-type tractor. It describes in 22 steps how to disassemble the torque divider by removing components like the planet carrier, shafts, gears, seals and housing. It then describes in 51 steps the reverse process of assembling the torque divider, including pressing bearings into place and installing seals, gears and other components back into the housing. The overall document provides very detailed technical instructions for servicing the torque divider.
Caterpillar cat d8 l track type tractor dozer bulldozer (prefix 4fb) service ...fjjskkemsmee
This document provides instructions for servicing the high-low transmission of a D8L track-type tractor. It describes how to remove and install the transmission, including disconnecting wiring and hoses. It also details how to disassemble and assemble the internal components of the transmission, such as removing clutches, carriers, discs, plates, pistons, gears, seals, and bearings. Precise tooling and procedures are specified to correctly service the transmission.
Caterpillar cat d5 c track type tractor dozer bulldozer (prefix 3mk) service ...fjjskkemsmee
The document provides instructions for removing and installing various components of the drive train on a D5C track-type tractor, including the drive shaft, steering clutch control valves, steering clutches, and related parts. Specific steps include draining fluids, removing covers, disconnecting linkages, and removing components by loosening bolts and nuts. Reinstallation follows the removal steps in reverse order, applying threadlock and sealants as needed and torquing fasteners to specified values.
Caterpillar cat 994 h wheel loader (prefix dwc) service repair manual (dwc000...fjjskkemsmee
This document provides assembly instructions for a piston pump used in the steering system of a 994H wheel loader. It outlines 44 steps to assemble the pump components, including installing bearings, seals, pistons, springs, and mounting the assembled pump. Proper measurement and shim selection are required to achieve the correct lift-off clearance. The instructions also cover reinstalling hydraulic lines and tanks once the pump is assembled.
Caterpillar cat 994 f wheel loader (prefix 442) service repair manual (442000...fjjskkemsmee
1. The document provides instructions for removing and installing the front drive housing and vibration damper of a Caterpillar 994F wheel loader.
2. To remove the front drive housing, various components must first be removed, including the oil filter base, crankshaft seal, accessory drive, and more. Tools and lifting devices are needed to remove the housing.
3. To remove the vibration damper, the pulley, hub, and damper group/assembly must be detached using guide bolts and lifting devices, as the components are heavy. Proper lubrication and torque specifications must be followed for reinstallation.
Caterpillar cat 994 d wheel loader (prefix 3tz) service repair manual (3tz000...fjjskkemsmee
The document provides instructions for removing, disassembling, assembling, and installing an engine oil pump on a Caterpillar 994D wheel loader. The removal procedure involves draining coolant, disconnecting electrical connections, and removing mounting brackets and hoses using various tools. The oil pump is then slid off the drive shaft. Disassembly further involves removing covers, gaskets, springs, and bearings. Assembly is the reverse of disassembly and proper positioning of parts is emphasized. Installation involves lifting the pump back onto the drive shaft and reattaching hoses and brackets.
The document provides instructions for servicing components of a 994 wheel loader, including:
- Removing and installing the supplemental steer pump, which involves removing hydraulic lines and bolts then reversing the steps to install.
- Disassembling and assembling the supplemental steer pump, which involves removing seals, plates, gears, and reversing the steps to assemble.
- Removing and installing the steering control valve, which involves disconnecting hydraulic lines and removing mounting bolts then reversing the steps to install.
- Disassembling and assembling the steering control valve, which involves removing plugs, springs, valves, and reversing the steps to assemble.
- Removing and installing the steering neutralizer valve, which
Caterpillar cat 993 k wheel loader (prefix z9k) service repair manual (z9k000...fjjskkemsmee
This document provides instructions for disassembling and assembling the input transfer gears of a 993K wheel loader transmission. It is a 26 step process that involves removing housing components and gears, inspecting and replacing parts as needed, heating and pressing bearings into place, measuring gear end play, and reassembling components using torque specifications and feeler gauges to ensure proper spacing. Tools required include eyebolts, drivers, dial indicators, thickness gauges, and lifting devices to maneuver the various heavy transmission parts. Proper cleaning and inspection of parts is emphasized to avoid problems during reassembly.
Caterpillar cat 993 k wheel loader (prefix z8z) service repair manual (z8z000...fjjskkemsmee
This document provides instructions for disassembling and assembling the parking brake on a 993K Wheel Loader. It describes removing components like the brake housing, pistons, discs, and shaft. It then explains assembling these components in reverse order. Special tools are listed and safety precautions mentioned. The process involves 17 detailed steps over two procedures for disassembly and assembly.
Caterpillar cat 993 k wheel loader (prefix z8d) service repair manual (z8d000...fjjskkemsmee
This document provides instructions for removing and installing various engine components on a Caterpillar 993K wheel loader, including:
- Inlet and exhaust valves, guides, and seat inserts
- Engine oil filter base
- Engine oil cooler
The procedures describe using various tools to remove parts like valves, guides, filters, hoses, and the oil cooler assembly. Installation is generally the reverse of removal, with instructions to clean parts, apply sealant or lubricant, and torque fasteners to the specified values. Safety notices warn of spring hazards and maintaining cleanliness to prevent premature wear.
Caterpillar cat 993 k wheel loader (prefix z4z) service repair manual (z4z000...fjjskkemsmee
The document provides instructions for disassembling and assembling the parking brake on a Caterpillar 993K wheel loader. It describes removing 16 different components of the parking brake including pistons, springs, discs, and housings. The assembly section then lists 17 steps for reinstalling these components in reverse order and adjusting associated bolts and seals. Tools including pullers, drivers, and sealant are required to complete the process safely and properly.
Caterpillar cat 993 k wheel loader (prefix z4d) service repair manual (z4d000...fjjskkemsmee
This document provides instructions for disassembling the service brake and final drive components of a 993K wheel loader. The service brake disassembly procedure involves removing reaction plates, discs, springs and other parts. The final drive disassembly involves removing planetary carriers, gears, bushings, retainers and other components. Detailed steps and illustrations are provided to guide mechanics through the process safely using the proper tools. Cleanliness is emphasized to prevent dirt from entering mechanical parts during disassembly.
Caterpillar cat 993 k wheel loader (prefix lwa) service repair manual (lwa000...fjjskkemsmee
This document provides instructions for removing and installing rear power take-off (RPTO) components on a 993K wheel loader. It describes disassembling the RPTO by removing nuts, bearings, gears, and cones. It then describes reassembling the RPTO by pressing in new bearings and cones and reinstalling gears, nuts, and locks. Separate sections provide instructions for installing the entire RPTO assembly and removing/installing the vibration damper and pulley.
Caterpillar cat 992 k wheel loader (prefix rm2) service repair manual (rm2000...fjjskkemsmee
The document provides instructions for disassembling and assembling various components of a Caterpillar 992K wheel loader. It includes steps for removing and installing the rear power take-off, vibration damper and pulley using various tools. Detailed illustrations accompany the multi-step procedures. Safety and installation torque specifications are provided. The document is intended as a service repair manual for technicians working on Caterpillar 992K wheel loaders.
Caterpillar cat 983 b track loader (prefix 58x) service repair manual (58x000...fjjskkemsmee
This document provides instructions for removing and installing various components of a 3406 engine fuel system for a 983B track loader. It describes removing and installing fuel valve adapters, the automatic timing advance assembly, and fuel injection lines. The procedures include draining coolant, using specialized tools to remove components, inspecting and replacing seals, and torquing fasteners to the specified values.
Caterpillar cat 966 k wheel loader (prefix tfs) service repair manual (tfs000...fjjskkemsmee
This document provides instructions for assembling and disassembling components of the steering system on a 966K wheel loader. The steps include installing bearings and seals in the piston pump, removing and installing the secondary steering pump and electric motor, removing and installing the secondary steering control valve, and disassembling the secondary steering valve. The document contains diagrams to illustrate the proper order and orientation of parts. Safety precautions are provided for spring loaded components.
Caterpillar cat 966 k wheel loader (prefix pbg) service repair manual (pbg000...fjjskkemsmee
This document provides instructions for assembling and disassembling a limited slip differential for a 966K wheel loader. It includes 15 steps for assembly, requiring various tools, and lubricating and installing each part in the correct order. It also lists 2 steps for disassembly, including marking the differential case halves and using a press to remove bolts and release spring compression safely.
Caterpillar cat 966 f wheel loader (prefix 8bg) service repair manual (8bg000...fjjskkemsmee
This document provides instructions for disassembling and assembling the torque converter of a 966F wheel loader. It describes 31 steps to disassemble the torque converter by removing components like housing bolts, gears, bearings, seals and shafts. It then describes 26 steps for reassembling the torque converter by reversing the disassembly steps and ensuring proper alignment of components. Tools required include link brackets, drivers and pliers.
Caterpillar cat 966 f wheel loader (prefix 4yg) service repair manual (4yg000...fjjskkemsmee
This document provides instructions for disassembling and assembling a limited slip differential for a 966F wheel loader. The summary is as follows:
1. The disassembly instructions describe removing components of the differential such as discs, gears, and housing pieces.
2. The assembly instructions describe cleaning and inspecting parts, applying lubricant, and reinstalling components in the reverse order of disassembly.
3. Special procedures are provided for differentials with part numbers 102-7507 and 142-0444, including measuring and adjusting the end play gap.
Caterpillar cat 966 f wheel loader (prefix 3xj) service repair manual (3xj000...fjjskkemsmee
The document provides instructions for disassembling and assembling axle shaft assemblies and brake groups for a Caterpillar 966F wheel loader. It describes removing and installing various components of the axle shaft assemblies and brake groups, including planetary carrier assemblies, axle shafts, seals, bearings, springs, and reaction plates. Detailed steps are provided for disassembling, cleaning, heating or cooling components as needed, and reassembling the axle shaft assemblies and brake groups.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
2. Link Product / Engine
Product Market Product Engine
521F TIER4B Z-BAR North America F4HFE413N*B001
521F TIER4B XT North America F4HFE413N*B001
521F TIER4B XR North America F4HFE413N*B001
47955970 02/02/2016
3. Contents
INTRODUCTION
Engine....................................................................................... 10
[10.001] Engine and crankcase ............................................................. 10.1
[10.202] Air cleaners and lines .............................................................. 10.2
[10.500] Selective Catalytic Reduction (SCR) exhaust treatment ........................... 10.3
[10.400] Engine cooling system ............................................................. 10.4
[10.414] Fan and drive ...................................................................... 10.5
[10.310] Aftercooler.......................................................................... 10.6
[10.304] Engine lubrication system.......................................................... 10.7
Transmission.............................................................................. 21
[21.113] Powershift transmission ............................................................ 21.1
[21.135] Powershift transmission external controls.......................................... 21.2
[21.155] Powershift transmission internal components...................................... 21.3
Four-Wheel Drive (4WD) system .................................................. 23
[23.314] Drive shaft.......................................................................... 23.1
Front axle system ....................................................................... 25
[25.100] Powered front axle ................................................................. 25.1
[25.102] Front bevel gear set and differential ............................................... 25.2
[25.108] Final drive hub, steering knuckles, and shafts ..................................... 25.3
[25.310] Final drives ......................................................................... 25.4
Rear axle system........................................................................ 27
[27.100] Powered rear axle.................................................................. 27.1
[27.106] Rear bevel gear set and differential................................................ 27.2
[27.120] Planetary and final drives .......................................................... 27.3
[27.124] Final drive hub, steering knuckles, and shafts ..................................... 27.4
Brakes and controls .................................................................... 33
47955970 02/02/2016
4. [33.202] Hydraulic service brakes ........................................................... 33.1
[33.110] Parking brake or parking lock ...................................................... 33.2
Hydraulic systems....................................................................... 35
[35.000] Hydraulic systems.................................................................. 35.1
[35.300] Reservoir, cooler, and filters........................................................ 35.2
[35.106] Variable displacement pump ....................................................... 35.3
[35.359] Main control valve.................................................................. 35.4
[35.357] Pilot system ........................................................................ 35.5
[35.752] Hydraulic fan drive cooling system................................................. 35.6
[35.355] Hydraulic hand control ............................................................. 35.7
[35.701] Front loader arm hydraulic system ................................................. 35.8
[35.723] Front loader bucket hydraulic system .............................................. 35.9
[35.734] Tool quick coupler hydraulic system ............................................. 35.10
Frames and ballasting ................................................................. 39
[39.100] Frame .............................................................................. 39.1
Steering..................................................................................... 41
[41.200] Hydraulic control components...................................................... 41.1
[41.216] Cylinders ........................................................................... 41.2
[41.910] Auxiliary steering ................................................................... 41.3
Wheels...................................................................................... 44
[44.511] Front wheels........................................................................ 44.1
[44.520] Rear wheels........................................................................ 44.2
Cab climate control ..................................................................... 50
[50.100] Heating ............................................................................. 50.1
[50.200] Air conditioning..................................................................... 50.2
Electrical systems....................................................................... 55
[55.000] Electrical system ................................................................... 55.1
47955970 02/02/2016
5. [55.100] Harnesses and connectors......................................................... 55.2
[55.015] Engine control system.............................................................. 55.3
[55.201] Engine starting system ............................................................. 55.4
[55.301] Alternator........................................................................... 55.5
[55.302] Battery.............................................................................. 55.6
[55.202] Cold start aid ....................................................................... 55.7
[55.011] Fuel tank system ................................................................... 55.8
[55.988] Selective Catalytic Reduction (SCR) electrical system ............................ 55.9
[55.989] Exhaust Gas Recirculation (EGR) electrical system ............................. 55.10
[55.012] Engine cooling system ........................................................... 55.11
[55.024] Transmission control system..................................................... 55.12
[55.519] Cab brake controls ............................................................... 55.13
[55.030] Service brake electrical system .................................................. 55.14
[55.031] Parking brake electrical system .................................................. 55.15
[55.512] Cab controls...................................................................... 55.16
[55.036] Hydraulic system control ......................................................... 55.17
[55.051] Cab Heating, Ventilation, and Air-Conditioning (HVAC) controls................. 55.18
[55.050] Heating, Ventilation, and Air-Conditioning (HVAC) control system............... 55.19
[55.047] Steering control system .......................................................... 55.20
[55.524] Cab controls (Lift arm, Boom, Dipper, Bucket) ................................... 55.21
[55.415] Loader arm and bucket control system .......................................... 55.22
[55.518] Wiper and washer system........................................................ 55.23
[55.404] External lighting .................................................................. 55.24
[55.405] External lighting switches and relays ............................................ 55.25
[55.514] Cab lighting ...................................................................... 55.26
[55.510] Cab or platform harnesses and connectors...................................... 55.27
[55.408] Warning indicators, alarms, and instruments .................................... 55.28
[55.DTC] FAULT CODES.................................................................. 55.29
Front loader and bucket............................................................... 82
47955970 02/02/2016
8. INTRODUCTION
Foreword - Important notice regarding equipment servicing
All repair and maintenance work listed in this manual must be carried out only by qualified dealership personnel,
strictly complying with the instructions given, and using, whenever possible, the special tools.
Anyone who performs repair and maintenance operations without complying with the procedures provided herein
shall be responsible for any subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional, or
local dealers, reject any responsibility for damages caused by parts and/or components not approved by the manu-
facturer, including those used for the servicing or repair of the product manufactured or marketed by the manufacturer.
In any case, no warranty is given or attributed on the product manufactured or marketed by the manufacturer in case
of damages caused by parts and/or components not approved by the manufacturer.
The manufacturer reserves the right to make improvements in design and changes in specifications at any time without
notice and without incurring any obligation to install them on units previously sold. Specifications, descriptions, and
illustrative material herein are as accurate as known at time of publication but are subject to change without notice.
In case of questions, refer to your CASE CONSTRUCTION Sales and Service Networks.
47955970 02/02/2016
3
9. INTRODUCTION
Safety rules
Personal safety
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible death or injury.
Throughout this manual you will find the signal words DANGER, WARNING, and CAUTION followed by special in-
structions. These precautions are intended for the personal safety of you and those working with you.
Read and understand all the safety messages in this manual before you operate or service the machine.
DANGER indicates a hazardous situation that, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
FAILURE TO FOLLOW DANGER, WARNING, AND CAUTION MESSAGES COULD RESULT
IN DEATH OR SERIOUS INJURY.
Machine safety
NOTICE: Notice indicates a situation that, if not avoided, could result in machine or property damage.
Throughout this manual you will find the signal word Notice followed by special instructions to prevent machine or
property damage. The word Notice is used to address practices not related to personal safety.
Information
NOTE: Note indicates additional information that clarifies steps, procedures, or other information in this manual.
Throughout this manual you will find the word Note followed by additional information about a step, procedure, or
other information in the manual. The word Note is not intended to address personal safety or property damage.
47955970 02/02/2016
4
10. INTRODUCTION
Personal safety
Carefully read this Manual before proceeding with main-
tenance, repairs, refuelling or other machine operations.
Repairs have to be carried out only by authorized and in-
structed staff; specific precautions have to be taken when
grinding, welding or when using mallets or heavy ham-
mers.
Non-authorized persons are not allowed to repair or carry
out maintenance on this machine. Do not carry out any
work on the equipment without prior authorization.
Ask your employer about the safety instructions in force
and safety equipment.
Nobody should be allowed in the cab during machine
maintenance unless he is a qualified operator helping
with the maintenance work.
If it is necessary to move the equipment to carry out re-
pairs or maintenance, do not lift or lower the equipment
from any other position than the operator’s seat.
TULI12WEX2004AA 1
Never carry out any operation on the machine when the
engine is running, except when specifically indicated.
Stop the engine and ensure that all pressure is relieved
from hydraulic circuits before removing caps, covers,
valves, etc.
All repair and maintenance operations should be carried
out with the greatest care and attention.
Service stairs and platforms used in a workshop or in the
field should be built in compliance with the safety rules in
force.
Any functional disorders, especially those affecting the
safety of the machine, should therefore be rectified im-
mediately.
DANGER
Unexpected movement!
Make sure parking brake is applied. Secure
machine with wheel chocks.
Failure to comply will result in death or serious
injury.
D0013A
TULI12WEX2005AA 2
Before performing any work on the machine, attach a
maintenance in progress tag. This tag can be applied on
the left-hand control lever, safety lever or cab door.
47955970 02/02/2016
5
11. INTRODUCTION
Product identification
LEIL15WHL0182FB 1
1. Cab door and hand holds 5. Roll Over Protection System (ROPS) cab
2. Steps 6. Loader lift arms
3. Bucket (Z-bar version) 7. Battery compartment
4. Bucket cylinder 8. Master disconnect switch
47955970 02/02/2016
24
12. INTRODUCTION
LEIL15WHL0183FB 2
1. Fuse access door 5. Windshield washer reservoir
2. Driving lights 6. Cab air filter access
3. Bucket (Z-bar version) 7. DEF/ADBLUE® fill tank
4. Drive shaft
47955970 02/02/2016
25
14. Engine - Engine and crankcase
Engine - General specification
Engine with 4 Speed Transmission
A. Low idle 1020 - 1080 RPM
Alternate low idle 870 - 930 RPM
Alternate Accelerated Idle 1270 - 1330 RPM
B. Maximum No Load RPM 2074 - 2244 RPM
C. Converter Stall 1950 - 2030 RPM
D. Hydraulic Stall 1900 - 2100 RPM
E. Converter and Hydraulic Stall 1400 - 1600 RPM
Temperature of the torque converter oil 82 - 104 °C (180 - 219 °F)
Temperature of the hydraulic oil 54 - 57 °C (129 - 135 °F)
NOTE: hydraulic stall and converter and hydraulic stall RPM values are read with the lift arms rised, the bucket held
in rolled back position, and the engine at Wide Open Throttle (WOT) in maximum power mode with the transmission
in manual mode and in third gear.
47955970 02/02/2016
10.1 [10.001] / 3
15. Engine - Engine and crankcase
Engine - Remove
NOTE: emissions sensors mounted in the exhaust stream are sensitive to extreme vibrations. Use of tools that gen-
erate extreme vibrations, such as impact wrenches and hammers, will result in damage to emission sensors. Avoid
using these tools during any service procedure in close proximity of emission sensors. If the use of these tools cannot
be avoided, remove the sensors using extreme caution prior to performing any service procedure.
1. Park the machine on a level surface and lower the
bucket to the ground. Put the articulation lock in the
LOCKED position.
RAPH12WEL1412AA 1
2. Turn the engine OFF. Actuate the brake pedal several
times to discharge the brake accumulators.
RCPH10WHL435AAH 2
3. Turn the key switch to the ON position. Move the loader
control lever back and forth minimally 30 times to re-
lease pressure from the hydraulic circuit. Turn the key
switch to the OFF position.
RCPH10WHL119BAL 3
47955970 02/02/2016
10.1 [10.001] / 4
16. Engine - Engine and crankcase
4. Slowly loosen the hydraulic reservoir filler cap to re-
lease air pressure in the hydraulic reservoir.
RCPH10WHL099BAL 4
5. Raise the engine hood using the handle hood under the
rear grill.
RAPH12WEL1493AA 5
6. Remove the retaining bolts of the inner fender panels.
NOTE: right-hand side of the machine is shown. The op-
eration is similar for the left-hand side.
LEIL15WHL0282AA 6
7. Locate the master disconnect switch under the engine
hood, on the left-hand side of the machine. Turn the
master disconnect switch to the OFF position.
LEIL15WHL0327AA 7
47955970 02/02/2016
10.1 [10.001] / 5
17. Engine - Engine and crankcase
8. Remove the two battery covers. Disconnect the batter-
ies from the machine.
RAPH12WEL1495CA 8
9. Loosen the screw (1) and open the access cover (2)
under the battery.
RAPH12WEL1494AA 9
47955970 02/02/2016
10.1 [10.001] / 6
18. Engine - Engine and crankcase
10. Place a suitable container below the radiator drain.
Remove the drain plug (1) and radiator cap to drain
the engine coolant into the container. then reinstall
the radiator cap after the coolant has drained.
NOTE: see machine specifications for cooling system
volum.
RAPH12WEL1411AA 10
11. Place a suitable container below the engine oil drain.
Remove the engine oil cap (2) to drain the engine oil
into the container. Then reinstall the engine oil cap
after the engine oil has drained.
NOTE: see machine specifications for cooling system vol-
ume.
NOTE: after draining the engine oil, disconnect the drain
hose from the frame to aid in removal of engine.
RAPH12WEL1411AA 11
12. Double up a nylon lifting strap and slide the strap
through the exhaust stack (1), located on the hood.
LEIL14WHL0400AB 12
13. Place a solid steel bar through the nylon strap. Raise
the hood and release the tension on the lifting motor.
RAPH12WEL1458AA 13
47955970 02/02/2016
10.1 [10.001] / 7
19. Engine - Engine and crankcase
14. Remove the right-hand gas strut from the hood.
Remove the left-hand gas strut from the hood.
RAPH12WEL1489AA 14
15. Remove the spring gas to separate the engine hood
from the rear chassis.
NOTE: for clarify, the engine hood is in NO show.
LEIL15WHL0141AB 15
16. Disconnect the hood wiring harness connector from
the rear chassis wiring harness connector. Identify
and tag the connectors to aid in reassembly.
LEIL15WHL0142AB 16
17. Tag and disconnect the backup alarm connector (1).
Remove the two straps cable tie (2).
LEIL15WHL0143AB 17
47955970 02/02/2016
10.1 [10.001] / 8
20. Engine - Engine and crankcase
18. With the assistance of another technician, balance the
engine hood and remove the hood hinge mounting
bolts (1) near the cab (2) from the cooler frame. Re-
peat the procedure for the other side.
RAPH12WEL1461AA 18
19. Carefully raise and remove the engine hood from the
machine. Lower the engine hood onto a suitable plat-
form. Disconnect the lifting equipment from the ex-
haust stack (1).
LEIL14WHL0400AB 19
20. Loosen the two bolts (2) and the related washers to
remove the bracket (1) of the relay decal.
LEIL15WHL0195AB 20
21. Tag and disconnect the engine wiring harness con-
nector from the air filter sensor (1). Loosen the clamp
(2) on the air intake hose (3) and disconnect the hose.
LEIL15WHL0196AB 21
47955970 02/02/2016
10.1 [10.001] / 9
21. Engine - Engine and crankcase
22. Tag and disconnect the engine wiring harness con-
nector from the air inlet humidity sensor (1).
LEIL15WHL0197AB 22
23. Loosen the clamps (2) on the turbocharger.
24. Loosen the clamps (3) on the air filter housing.
25. Loosen the clamp (4) on the crankcase vent hose (5).
26. Remove the intake air hose (1). Cover the tur-
bocharger inlet to prevent debris entry.
LEIL15WHL0198AB 23
27. Loosen the bolt to separate the P-clamp (of the alter-
nate hose) on the engine side of the head shield.
LEIL15WHL0148AA 24
47955970 02/02/2016
10.1 [10.001] / 10
22. Engine - Engine and crankcase
28. Remove the two securing bolts (3), the four washers
(4), and two nuts (5). Remove the bracket (2) with the
air filter (1) as an assembly.
LEIL15WHL0171BB 25
29. Remove the four mounting bolts and the four washers
from the belt cover. Remove the cover.
LEIL15WHL0204AA 26
30. After removing the belt cover, remove the cover
mounting bracket from the left rear side of machine
frame
LEIL15WHL0204AA 27
47955970 02/02/2016
10.1 [10.001] / 11
23. Engine - Engine and crankcase
31. Remove the drive belt from the engine.
LEIL15WHL0192AB 28
32. If machine is equipped with the air conditioning sys-
tem, identify, tag, and disconnect the engine wiring
harness connectors from the air compressor clutch
connector (1).
Disconnect the pressure switch (2).
Recovery the refrigerant, as indicated in Air condi-
tioning - Service instruction (50.200). Disconnect
the low-pressure line (3) from the suction port and
the high-pressure line (4) from the discharge port, lo-
cated on the compressor. Immediately install protec-
tive caps on the open ports and lines.
LEIL15WHL0199AB 29
33. Remove the belt (5). Remove the three mounting
bolts (6). Remove the bolt (7) and carefully remove
the compressor (1) with the support bracket.
LEIL15WHL0200AB 30
34. Loosen the clamp. Remove and discard the O-ring
and the air intake tube of the turbocharger.
LEIL15WHL0145AB 31
47955970 02/02/2016
10.1 [10.001] / 12
24. Engine - Engine and crankcase
35. Loosen the clamp of the hose of the after cooler inlet
and remove the hose.
LEIL15WHL0263AB 32
36. Remove the clamp (2) and the clamp (3).
Separate the clamp (4) from the bracket of the coolant
overflow tank.
Loosen the bolts (1) to remove the coolant tank.
LEIL15WHL0264AB 33
37. Remove the bolts and the washers (2) to separate the
bracket (1) of the overflow tank from the rear plate of
the cooling system frame.
LEIL15WHL0265AB 34
38. Loosen the bolts (1) and remove the two clamps to
separate the SCR sensor wiring harness from the rear
chassis.
LEIL15WHL0272AB 35
47955970 02/02/2016
10.1 [10.001] / 13
25. Engine - Engine and crankcase
39. Tag and disconnect the SCR sensor connector from
the rear chassis harness connector.
LEIL15WHL0227AB 36
40. Loosen the hexagonal nut of the temperature sensor
(1). Disconnect the temperature sensor (1) on the
exhaust pipe (DOC to SCR).
41. Tag and disconnect the wire harness (3) of the rear
chassis wiring harness of the temperature sensor (1).
Cut the straps (2) that hold the sensor lead.
LEIL15WHL0266AB 37
42. Remove the bolts, the washers, and the nuts (3) to
separate the bracket (2) of the tube radiator from the
muffler support (1).
LEIL15WHL0267AB 38
47955970 02/02/2016
10.1 [10.001] / 14
26. Engine - Engine and crankcase
43. Remove the two bolts (1), the four washers (2), and
the two nuts (3) to separate the clamps (4) and (6)
from the bracket (8).
Remove the clamp (4) from the DEF bundle (5). Re-
move the clamp (6) from the hose coolant assembly
(7).
LEIL15WHL0193BB 39
44. Remove the two bolts (4), the washers (5), the spacer
(10), and the nut (6) to separate the clamp (3) from
the bracket (11). Remove the clamp (3) from the hose
coolant assembly (1).
45. Remove the two bolts (8), the washers (9), and the
nut (6) to separate the clamp (7) from the bracket (11).
Remove the clamp (7) from the DEF bundle (2).
LEIL15WHL0261BB 40
47955970 02/02/2016
10.1 [10.001] / 15
27. Engine - Engine and crankcase
46. Drain the engine coolant.
Disconnect the hoses (1) from the Dosing Module (2).
LEIL15WHL0323AB 41
47. Disconnect the electrical connector (3) from the Dos-
ing Module (2).
LEIL15WHL0176AA 42
48. Loosen the bolt to remove the P-clamps (1). Discon-
nect the return coolant hose (2) and remove it from
the machine.
LEIL15WHL0270AB 43
49. Loosen the bolt (1) and remove the P-clamp (3) from
the supply module support (4). Remove the P-clamp
(2). Tag and disconnect the hose (5) from the DEF/
ADBLUE® tank vent filter.
LEIL15WHL0269AB 44
47955970 02/02/2016
10.1 [10.001] / 16
28. Engine - Engine and crankcase
50. Remove the bolts (2) to remove the DEF/ADBLUE®
tank vent filter (1) from the rear plate of the cooling
system frame.
LEIL15WHL0268AB 45
51. Remove the bolts (2) and washers to remove the
bracket (1) from the engine.
LEIL15WHL0191AB 46
52. Loosen the clamp (1) to separate the exhaust flap from
the inlet DOC pipe.
LEIL15WHL0172AB 47
47955970 02/02/2016
10.1 [10.001] / 17
29. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
30. Engine - Engine and crankcase
53. Attach a suitable lifting straps to support the muffler
support (1) with the Diesel Oxidation Catalyst (DOC)
(6) and the Selective Catalytic Reduction muffler
(SCR) (7).
54. Remove the bolts (4) and (5) with their related wash-
ers to separate the muffler support (1) from the sup-
port structures (2) and (3).
55. Remove the muffler support (1), the SCR and the SCR
sensor harness as an assembly.
NOTE: do not damage the muffler support during removal.
LEIL15WHL0178BB 48
56. Tag and disconnect the DEF/ADBLUE® supply and re-
turn lines (1) from the supply module. Tag and discon-
nect the coolant water supply and return lines (2) from
the supply module. Tag and disconnect the wiring har-
ness (3) from the supply module.
LEIL15WHL0271AB 49
57. Push inward on the fitting retaining clip and discon-
nect the coolant outlet (2), the coolant inlet (1) and
by-pass (3) lines from the heater control valve. Tag
and disconnect the machine wiring harness (4) from
the heater control valve.
LEIL15WHL0273AB 50
47955970 02/02/2016
10.1 [10.001] / 18
31. Engine - Engine and crankcase
58. Tag and disconnect the fuel filter heater wire (1) and
the water sensor (2). Drain the fuel filter and discon-
nect the inlet fuel line (3) and outlet fuel line (4) from
the fuel filter head. Plug the lines and cap the fittings.
LEIL15WHL0274AB 51
59. Remove the fuel line from the top of the ECU (Engine
Control Unit).
Plug the line and cap the fitting.
LEIL15WHL0306AB 52
60. Remove the two bolts (1), the washers, and the nuts to
separate the bracket (2) of the supply module from the
support (3). Remove the two bolts (4), the washers,
and the nuts to separate the bracket (2) of the supply
module from the rear chassis. Remove the bracket
(2) of the supply module, with the supply module, the
DEF/ADBLUE® Heater Control valve and the fuel pre-
filter as an assembly.
NOTE: pay attention to supply module and heater valve.
LEIL15WHL0275AB 53
61. Remove the six bolts (1) and the six washer (2). Re-
move the DEF/ADBLUE® storage tank cover (3) lo-
cated on the right-hand side of the machine.
LEIL15WHL0303AB 54
47955970 02/02/2016
10.1 [10.001] / 19
32. Engine - Engine and crankcase
62. Tag and disconnect the wire harness and DEF/
ADBLUE® supply and return lines from the
DEF/ADBLUE® storage tank. Cap the supply lines.
LEIL15WHL0304AA 55
63. Remove the bolts (1), the washers, and the nuts to
remove the supply module support (2).
LEIL15WHL0276AB 56
64. Tag and disconnect the cables from the master dis-
connect switch.
LEIL15WHL0307AB 57
47955970 02/02/2016
10.1 [10.001] / 20
33. Engine - Engine and crankcase
65. Remove the four bolts (3) and the four washers (4) to
remove the support structures (1)from the rear chas-
sis (2).
LEIL15WHL0262BB 58
66. Loosen the clamp on the intake manifold that secures
the after cooler output hose.
RAPH12WEL1464AA 59
67. Loosen the clamp (2) on the after cooler and remove
the output hose (1) of the after cooler from the inter-
cooler.
LEIL15WHL0277AB 60
47955970 02/02/2016
10.1 [10.001] / 21
34. Engine - Engine and crankcase
68. Remove the cooling fan screen (3) and the bottom
cooling fan screen (2) removing the four bolts (1) and
the related nuts.
LEIL15WHL0301AB 61
69. Loosen the clamps (1) and (2) to remove the bottom
hose coolant (3) from the engine.
NOTE: the battery cover plate has been hidden for clarify.
LEIL15WHL0278AB 62
70. Cut the tie straps (1) and remove the clamp (4). Sep-
arate the breather hose (3) from the radiator hose (2).
Loosen clamp (6) from the hose (5). Loosen clamp on
the engine then remove the hose (5).
LEIL15WHL0279AB 63
71. Remove the nuts (2) from the U-bolt clamp, to sepa-
rate the radiator hose (3) from the bracket (1).
LEIL15WHL0280AB 64
47955970 02/02/2016
10.1 [10.001] / 22