This service manual provides information for servicing the 1650M Stage IIIB Crawler Dozer with a PIN number of NGC107000 or above. The manual covers the engine, hydrostatic drive, brakes and controls, hydraulic systems, tracks and track suspension, cab climate control, electrical systems, dozer blade and arm, tools, and platform/cab/bodywork. Safety precautions are provided throughout for the personal safety of those servicing the machine.
Case 1150 m stage iiib crawler dozer service repair manual (pin ngc105100 and...fjsjjefkskekm
This document is a service manual for the 1150M Stage IIIB Crawler Dozer with engine PIN NGC105100 and above. It contains information on engine systems, hydrostatic drive, brakes and controls, hydraulic systems, tracks and suspension, cab climate control, electrical systems, dozer blade and arm, and platform, cab and bodywork. The manual instructs only qualified dealership personnel to perform repair and maintenance following the procedures and using the special tools provided.
Case 1150 m tier 4b (final) crawler dozer service repair manual instant downl...ufsjejfsekeme
This document provides instructions for removing the engine from a 1150M dozer. It outlines 24 steps to disconnect all electrical connections, hoses, lines and mounts. This includes removing the air cleaner, turbocharger pipe, starter, alternator, radiator and other components. Proper lifting equipment is required as the engine weighs approximately 635 kg.
Case 1150 m tier 4b (final) crawler dozer service repair manual (pin ngc10510...fujsekkskemm
This document is a service manual for 1150M Crawler Dozers from Case Construction. It provides part numbers, product links to engines, and a detailed table of contents that lists all systems of the machine and subsections within each system covered in the manual. Safety information is also provided at the beginning regarding qualifications and procedures for servicing the equipment.
Case 1150 m tier 2 crawler dozer service repair manual instant download (pin ...uufsjkefkksemm
This document provides an introduction and safety information for a service manual for Case 1150M crawler dozers. It lists contents that will be covered in the manual, including the engine, hydrostatic drive, brakes and controls, hydraulic systems, tracks and suspension, cab climate control, electrical systems, dozer blade and arm, and platform, cab and bodywork. The introduction emphasizes that only qualified dealership personnel should perform repairs and maintenance using the procedures and special tools specified in the manual. It outlines safety alert symbols and definitions for dangers, warnings and cautions related to personal safety and notices related to preventing machine damage.
Case 1150 m tier 2 crawler dozer service repair manual (pin ngc105100 and above)fksejfjskekmm
This document provides an introduction and safety information for a service manual for Case 1150M crawler dozers. It lists contents that will be covered in the manual, including the engine, hydrostatic drive, brakes and controls, hydraulic systems, tracks and suspension, cab climate control, electrical systems, dozer blade and arm, and platform, cab and bodywork. The introduction emphasizes that only qualified dealership personnel should perform repair and maintenance following the instructions precisely and using the proper tools. It outlines danger, warning and caution symbols used in the manual to alert the reader to potential hazards and injuries.
Case cx37 c mini excavator service repair manualfksejfjskekmm
This service manual provides information on servicing the CX37C mini excavator. It contains sections on the engine, hydraulic systems, frames and ballasting, tracks and track suspension, electrical systems, booms, dippers and buckets, and the platform, cab, bodywork and decals. The document includes an engine component identification diagram, exploded views of engine assemblies, descriptions of engine components and systems, and repair section indexes with page references.
Case cx37 c mini excavator service repair manual instant downloadufjskekkemm
This service manual provides information on servicing the CX37C mini excavator, including the Tier IV final engine. It contains sections covering the engine systems, hydraulic systems, frames and ballasting, tracks and track suspension, electrical systems, booms, dippers and buckets, and the platform, cab, bodywork and decals. Safety precautions are provided throughout instructing the reader to only have qualified personnel perform repair and maintenance work according to the procedures in the manual.
Case 1650 m tier 2 crawler dozer service repair manual instant download (pin ...uufsjkefkksemm
The document is a service manual that provides instructions and diagrams for servicing various components of a Case 1650M Crawler Dozer. It includes sections on the engine, hydrostatic drive, brakes and controls, hydraulic systems, tracks and suspension, cab climate control, electrical systems, the dozer blade and arm, tools, and the platform, cab and bodywork. The manual provides detailed part numbers, assembly and repair instructions, component locations, and specifications to guide maintenance and repairs of the dozer.
Case 1150 m stage iiib crawler dozer service repair manual (pin ngc105100 and...fjsjjefkskekm
This document is a service manual for the 1150M Stage IIIB Crawler Dozer with engine PIN NGC105100 and above. It contains information on engine systems, hydrostatic drive, brakes and controls, hydraulic systems, tracks and suspension, cab climate control, electrical systems, dozer blade and arm, and platform, cab and bodywork. The manual instructs only qualified dealership personnel to perform repair and maintenance following the procedures and using the special tools provided.
Case 1150 m tier 4b (final) crawler dozer service repair manual instant downl...ufsjejfsekeme
This document provides instructions for removing the engine from a 1150M dozer. It outlines 24 steps to disconnect all electrical connections, hoses, lines and mounts. This includes removing the air cleaner, turbocharger pipe, starter, alternator, radiator and other components. Proper lifting equipment is required as the engine weighs approximately 635 kg.
Case 1150 m tier 4b (final) crawler dozer service repair manual (pin ngc10510...fujsekkskemm
This document is a service manual for 1150M Crawler Dozers from Case Construction. It provides part numbers, product links to engines, and a detailed table of contents that lists all systems of the machine and subsections within each system covered in the manual. Safety information is also provided at the beginning regarding qualifications and procedures for servicing the equipment.
Case 1150 m tier 2 crawler dozer service repair manual instant download (pin ...uufsjkefkksemm
This document provides an introduction and safety information for a service manual for Case 1150M crawler dozers. It lists contents that will be covered in the manual, including the engine, hydrostatic drive, brakes and controls, hydraulic systems, tracks and suspension, cab climate control, electrical systems, dozer blade and arm, and platform, cab and bodywork. The introduction emphasizes that only qualified dealership personnel should perform repairs and maintenance using the procedures and special tools specified in the manual. It outlines safety alert symbols and definitions for dangers, warnings and cautions related to personal safety and notices related to preventing machine damage.
Case 1150 m tier 2 crawler dozer service repair manual (pin ngc105100 and above)fksejfjskekmm
This document provides an introduction and safety information for a service manual for Case 1150M crawler dozers. It lists contents that will be covered in the manual, including the engine, hydrostatic drive, brakes and controls, hydraulic systems, tracks and suspension, cab climate control, electrical systems, dozer blade and arm, and platform, cab and bodywork. The introduction emphasizes that only qualified dealership personnel should perform repair and maintenance following the instructions precisely and using the proper tools. It outlines danger, warning and caution symbols used in the manual to alert the reader to potential hazards and injuries.
Case cx37 c mini excavator service repair manualfksejfjskekmm
This service manual provides information on servicing the CX37C mini excavator. It contains sections on the engine, hydraulic systems, frames and ballasting, tracks and track suspension, electrical systems, booms, dippers and buckets, and the platform, cab, bodywork and decals. The document includes an engine component identification diagram, exploded views of engine assemblies, descriptions of engine components and systems, and repair section indexes with page references.
Case cx37 c mini excavator service repair manual instant downloadufjskekkemm
This service manual provides information on servicing the CX37C mini excavator, including the Tier IV final engine. It contains sections covering the engine systems, hydraulic systems, frames and ballasting, tracks and track suspension, electrical systems, booms, dippers and buckets, and the platform, cab, bodywork and decals. Safety precautions are provided throughout instructing the reader to only have qualified personnel perform repair and maintenance work according to the procedures in the manual.
Case 1650 m tier 2 crawler dozer service repair manual instant download (pin ...uufsjkefkksemm
The document is a service manual that provides instructions and diagrams for servicing various components of a Case 1650M Crawler Dozer. It includes sections on the engine, hydrostatic drive, brakes and controls, hydraulic systems, tracks and suspension, cab climate control, electrical systems, the dozer blade and arm, tools, and the platform, cab and bodywork. The manual provides detailed part numbers, assembly and repair instructions, component locations, and specifications to guide maintenance and repairs of the dozer.
Case 1150 m stage iiib crawler dozer service repair manual (pin ngc105100 and...fjkskefkemm
This document provides instructions to remove the engine from a 1150M crawler dozer. It involves disconnecting electrical connections, hoses, lines, and removing mounting hardware. Proper lifting equipment is required as the engine weighs approximately 635 kg. 24 steps are outlined which include removing components like the air cleaner, starter, alternator, and disconnecting fuel, coolant, and electrical lines.
Case cx37 c mini excavator service repair manualfusjejksekfmm
This service manual provides information on servicing the CX37C mini excavator, including the Tier IV final engine. It contains sections covering the engine systems, hydraulic systems, frames and ballasting, tracks and track suspension, electrical systems, booms, dippers and buckets, and the platform, cab, bodywork and decals. Safety precautions are provided throughout instructing the reader to only have qualified personnel perform repair and maintenance work according to the procedures in the manual.
Case cx37 c mini excavator service repair manualfusfejskekem
This service manual provides information on servicing the CX37C mini excavator, including its Tier IV final engine, hydraulic systems, frames and ballasting, tracks and track suspension, electrical systems, booms, dippers, buckets, and cab. The introduction outlines safety rules for personal safety and machine safety when performing repairs and maintenance. Technicians are instructed to only perform work listed in the manual using the proper procedures and special tools.
Case 1650 m tier 2 crawler dozer service repair manual (pin ngc107000 and above)fujsjekskem
This document is a service manual for the 1650M Tier 2 Crawler Dozer that provides information on maintenance and repair of the dozer's systems and components. It contains sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, tracks and suspension, cab climate control, electrical systems, dozer blade and arm, tools, and other components. Safety precautions are provided to ensure personal safety when servicing the equipment.
Case 1650 m tier 2 crawler dozer service repair manual (pin ngc107000 and above)fjjsekfksmem
This document provides a service manual for a 1650M Crawler Dozer. It contains sections on the engine, hydrostatic drive, brakes and controls, hydraulic systems, tracks and track suspension, cab climate control, electrical systems, dozer blade and arm, tools, and other components. The document includes detailed part numbers, diagrams, removal and installation instructions to service and repair the dozer.
Case 1150 m tier 4b (final) crawler dozer service repair manual (pin ngc10510...fjjskefkskem
This document provides instructions for removing the engine from a 1150M dozer. It outlines 24 steps including disconnecting electrical connections, hoses, lines, and removing mounting hardware. Proper safety precautions and use of lifting equipment are emphasized due to the engine's significant weight of approximately 635 kg (1400 lb).
Case 1150 m tier 4b (final) crawler dozer service repair manual (pin ngc10510...fusjezsfkskefmsme
This document is a service manual for 1150M Crawler Dozers from Case Construction. It provides part numbers, product links to engines, and a detailed table of contents that lists all systems of the machine and subsections within each system covered in the manual. Safety information is also provided at the beginning regarding qualifications and procedures for servicing the equipment.
Case cx37 c mini excavator service repair manualfjjsekksekmm
This document is a service manual for the CX37C Mini Excavator that contains information on the engine, hydraulic systems, frames and ballasting, tracks and track suspension, electrical systems, booms, dippers, buckets, and the platform, cab, bodywork, and decals. It provides part numbers, sections for various components, and safety information for servicing the machine.
Volvo g710 b motor grader service repair manualfjjsekksekmm
The document provides instructions for removing and installing a clutch housing on a G700B motor grader. It describes removing components like the fuel tank, hoses, and upper driveshaft to access the clutch housing. The bearing support housing and clutch are then removed from the clutch housing. Instructions are provided for removing and installing the clutch assembly and related components. Finally, the document outlines reinstalling the clutch housing and torquing bolts to the specified values.
Volvo ec700 c ld ec700cld excavator service repair manualfjjsekksekmm
The document contains information about the power transmission system and track gearbox of an excavator. It describes how mechanical power from the engine is converted to hydraulic power which powers the travel motors, slew motor, and hydraulic cylinders. It also provides descriptions, illustrations and removal/installation instructions for the track gearbox, along with maintenance standards, troubleshooting tips, and precautions for operation.
Volvo ec700 c l ec700cl excavator service repair manualfjjsekksekmm
The document contains information about the power transmission system and track gearbox of an excavator. It describes how mechanical power from the engine is converted to hydraulic power and then back to mechanical power to operate functions like travel, slewing and attachments. It provides descriptions, illustrations and maintenance procedures for the track gearbox, including removing, installing, troubleshooting, specifications and precautions for operation. Lubrication oil type and filling procedures are also outlined.
Volvo ec700 b lc ec700blc excavator service repair manualfjjsekksekmm
The document contains information about the power transmission system and track gearbox of an excavator. It describes how mechanical power from the engine is converted to hydraulic power which powers the travel motors, slew motor, and hydraulic cylinders. It also provides descriptions, illustrations and removal/installation instructions for the track gearbox, along with maintenance standards, troubleshooting tips, and precautions for operation.
Volvo ec360 b nlc ec360bnlc excavator service repair manualfjjsekksekmm
This document provides service information for a demolition machine, including its components and measurements. It contains diagrams showing the location of major mechanical components. It then describes the demolition machine and includes a diagram highlighting added protective structures. Finally, it provides conversion tables for common units of measurement for length, area, volume, weight, pressure and other values.
Volvo ec210 c lr ec210clr excavator service repair manualfjjsekksekmm
The document provides information on the power transmission system of an excavator. It describes how mechanical power from the engine is converted to hydraulic power via pumps and then back to mechanical power via hydraulic motors and reduction gears to power travel, slewing, and attachment functions. It then focuses on the track gearbox, explaining its dual planetary gear configuration, port connections, components, torque flow, maintenance standards, and troubleshooting.
Volvo ec210 c ld ec210cld excavator service repair manualfjjsekksekmm
The document provides information on replacing the track unit and track gearbox cover of an excavator. It outlines 14 steps for replacing the track unit, including removing the track chain, sprocket, motor cover, hoses and fittings before lifting the track unit off with a hoist. It then describes 8 steps for replacing the track gearbox cover, which involves draining the oil, removing screws and separating the cover using set screws before cleaning and reapplying the surface.
Volvo ec210 b nlc ec210bnlc excavator service repair manualfjjsekksekmm
1) The document provides instructions for removing and installing the superstructure and various guards of an excavator.
2) Key steps include disconnecting hoses and dismantling parts before lifting the superstructure with a crane, as well as applying threadlock and following tightening specifications upon reinstallation.
3) Safety warnings are given to pay attention to footing and watch for heavy parts when removing or handling the superstructure and guards.
Volvo ec210 b lr ec210blr excavator service repair manualfjjsekksekmm
The document provides instructions for removing a counterweight from an excavator. It contains the following key details:
1. The counterweight must be lifted carefully as it is heavy, using certified lifting equipment rated for the weight.
2. Position the boom and bucket on the ground and engage the safety locking lever before removal.
3. Remove covers and plugs from the top of the counterweight and attach lifting cables to the lifting point.
4. Remove four bolts to detach the counterweight and lift it off the retaining pin onto a suitable support.
Volvo ec140 lc ec140 lc excavator service repair manualfjjsekksekmm
1. The document provides specifications for two excavator models, the EC140LC and EC140LCM, including dimensions of the undercarriage, track components, ground contact pressures for different track shoe widths, and other technical details.
2. The instructions describe the process for installing and removing the superstructure of an excavator, including lifting points, torque specifications for fasteners, and reconnecting hydraulic and electrical components.
3. Additional documents provide service information for repair and maintenance of excavator undercarriage components like idlers, including diagrams of parts, assembly and disassembly instructions, and specifications for lubrication and torque values.
Hitachi zaxis 230 excavator service repair manualfjjsekksekmm
This document contains safety information and instructions for operating an excavator safely. It discusses recognizing safety symbols and signals, following safety instructions, preparing for emergencies, wearing protective clothing, protecting against noise, inspecting the machine, general precautions for the cab, using handholds and steps carefully, adjusting the operator's seat, fastening the seat belt, moving and operating the machine safely, operating only from the operator's seat, jump starting safely, not allowing riders, providing signals for jobs with multiple machines, confirming the machine's travel direction, and driving the machine safely. Safety is emphasized throughout to prevent injury and damage.
Hitachi zaxis 225 usrlc excavator service repair manualfjjsekksekmm
This document contains sections from a service manual for an excavator. It includes sections on safety alerts, safety precautions, operating procedures, and technical specifications. The sections advise operators to wear protective equipment, inspect the machine daily, follow all safety instructions, secure seat belts, and only start the engine from the operator's seat. Operators are instructed to drive safely and watch out for bystanders when moving or operating the machine.
Hitachi zaxis 135 us 3 class hydraulic excavator service repair manualfjjsekksekmm
This document provides safety information and guidelines for machine operators. It describes various safety symbols and signal words that are used to indicate hazards. It emphasizes the importance of carefully reading and following all safety instructions in the manual. It provides tips for safe operation, such as inspecting the machine, wearing protective equipment, using handholds and steps carefully, and adjusting the operator's seat properly.
Case tr320 compact track loader operation manualfjjsekksekmm
This document is an operator's manual for Alpha Series skid steer loaders and compact track loaders. It provides information on safety, controls, operation, transport, working operations, and maintenance. The manual contains instructions on starting and stopping the machine, moving and steering, operating attachments, transporting, and basic maintenance procedures. Safety warnings and precautions are emphasized throughout regarding the safe operation and maintenance of the equipment.
More Related Content
Similar to Case 1650 m stage iiib crawler dozer service repair manual (pin ngc107000 and above)
Case 1150 m stage iiib crawler dozer service repair manual (pin ngc105100 and...fjkskefkemm
This document provides instructions to remove the engine from a 1150M crawler dozer. It involves disconnecting electrical connections, hoses, lines, and removing mounting hardware. Proper lifting equipment is required as the engine weighs approximately 635 kg. 24 steps are outlined which include removing components like the air cleaner, starter, alternator, and disconnecting fuel, coolant, and electrical lines.
Case cx37 c mini excavator service repair manualfusjejksekfmm
This service manual provides information on servicing the CX37C mini excavator, including the Tier IV final engine. It contains sections covering the engine systems, hydraulic systems, frames and ballasting, tracks and track suspension, electrical systems, booms, dippers and buckets, and the platform, cab, bodywork and decals. Safety precautions are provided throughout instructing the reader to only have qualified personnel perform repair and maintenance work according to the procedures in the manual.
Case cx37 c mini excavator service repair manualfusfejskekem
This service manual provides information on servicing the CX37C mini excavator, including its Tier IV final engine, hydraulic systems, frames and ballasting, tracks and track suspension, electrical systems, booms, dippers, buckets, and cab. The introduction outlines safety rules for personal safety and machine safety when performing repairs and maintenance. Technicians are instructed to only perform work listed in the manual using the proper procedures and special tools.
Case 1650 m tier 2 crawler dozer service repair manual (pin ngc107000 and above)fujsjekskem
This document is a service manual for the 1650M Tier 2 Crawler Dozer that provides information on maintenance and repair of the dozer's systems and components. It contains sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, tracks and suspension, cab climate control, electrical systems, dozer blade and arm, tools, and other components. Safety precautions are provided to ensure personal safety when servicing the equipment.
Case 1650 m tier 2 crawler dozer service repair manual (pin ngc107000 and above)fjjsekfksmem
This document provides a service manual for a 1650M Crawler Dozer. It contains sections on the engine, hydrostatic drive, brakes and controls, hydraulic systems, tracks and track suspension, cab climate control, electrical systems, dozer blade and arm, tools, and other components. The document includes detailed part numbers, diagrams, removal and installation instructions to service and repair the dozer.
Case 1150 m tier 4b (final) crawler dozer service repair manual (pin ngc10510...fjjskefkskem
This document provides instructions for removing the engine from a 1150M dozer. It outlines 24 steps including disconnecting electrical connections, hoses, lines, and removing mounting hardware. Proper safety precautions and use of lifting equipment are emphasized due to the engine's significant weight of approximately 635 kg (1400 lb).
Case 1150 m tier 4b (final) crawler dozer service repair manual (pin ngc10510...fusjezsfkskefmsme
This document is a service manual for 1150M Crawler Dozers from Case Construction. It provides part numbers, product links to engines, and a detailed table of contents that lists all systems of the machine and subsections within each system covered in the manual. Safety information is also provided at the beginning regarding qualifications and procedures for servicing the equipment.
Case cx37 c mini excavator service repair manualfjjsekksekmm
This document is a service manual for the CX37C Mini Excavator that contains information on the engine, hydraulic systems, frames and ballasting, tracks and track suspension, electrical systems, booms, dippers, buckets, and the platform, cab, bodywork, and decals. It provides part numbers, sections for various components, and safety information for servicing the machine.
Similar to Case 1650 m stage iiib crawler dozer service repair manual (pin ngc107000 and above) (8)
Volvo g710 b motor grader service repair manualfjjsekksekmm
The document provides instructions for removing and installing a clutch housing on a G700B motor grader. It describes removing components like the fuel tank, hoses, and upper driveshaft to access the clutch housing. The bearing support housing and clutch are then removed from the clutch housing. Instructions are provided for removing and installing the clutch assembly and related components. Finally, the document outlines reinstalling the clutch housing and torquing bolts to the specified values.
Volvo ec700 c ld ec700cld excavator service repair manualfjjsekksekmm
The document contains information about the power transmission system and track gearbox of an excavator. It describes how mechanical power from the engine is converted to hydraulic power which powers the travel motors, slew motor, and hydraulic cylinders. It also provides descriptions, illustrations and removal/installation instructions for the track gearbox, along with maintenance standards, troubleshooting tips, and precautions for operation.
Volvo ec700 c l ec700cl excavator service repair manualfjjsekksekmm
The document contains information about the power transmission system and track gearbox of an excavator. It describes how mechanical power from the engine is converted to hydraulic power and then back to mechanical power to operate functions like travel, slewing and attachments. It provides descriptions, illustrations and maintenance procedures for the track gearbox, including removing, installing, troubleshooting, specifications and precautions for operation. Lubrication oil type and filling procedures are also outlined.
Volvo ec700 b lc ec700blc excavator service repair manualfjjsekksekmm
The document contains information about the power transmission system and track gearbox of an excavator. It describes how mechanical power from the engine is converted to hydraulic power which powers the travel motors, slew motor, and hydraulic cylinders. It also provides descriptions, illustrations and removal/installation instructions for the track gearbox, along with maintenance standards, troubleshooting tips, and precautions for operation.
Volvo ec360 b nlc ec360bnlc excavator service repair manualfjjsekksekmm
This document provides service information for a demolition machine, including its components and measurements. It contains diagrams showing the location of major mechanical components. It then describes the demolition machine and includes a diagram highlighting added protective structures. Finally, it provides conversion tables for common units of measurement for length, area, volume, weight, pressure and other values.
Volvo ec210 c lr ec210clr excavator service repair manualfjjsekksekmm
The document provides information on the power transmission system of an excavator. It describes how mechanical power from the engine is converted to hydraulic power via pumps and then back to mechanical power via hydraulic motors and reduction gears to power travel, slewing, and attachment functions. It then focuses on the track gearbox, explaining its dual planetary gear configuration, port connections, components, torque flow, maintenance standards, and troubleshooting.
Volvo ec210 c ld ec210cld excavator service repair manualfjjsekksekmm
The document provides information on replacing the track unit and track gearbox cover of an excavator. It outlines 14 steps for replacing the track unit, including removing the track chain, sprocket, motor cover, hoses and fittings before lifting the track unit off with a hoist. It then describes 8 steps for replacing the track gearbox cover, which involves draining the oil, removing screws and separating the cover using set screws before cleaning and reapplying the surface.
Volvo ec210 b nlc ec210bnlc excavator service repair manualfjjsekksekmm
1) The document provides instructions for removing and installing the superstructure and various guards of an excavator.
2) Key steps include disconnecting hoses and dismantling parts before lifting the superstructure with a crane, as well as applying threadlock and following tightening specifications upon reinstallation.
3) Safety warnings are given to pay attention to footing and watch for heavy parts when removing or handling the superstructure and guards.
Volvo ec210 b lr ec210blr excavator service repair manualfjjsekksekmm
The document provides instructions for removing a counterweight from an excavator. It contains the following key details:
1. The counterweight must be lifted carefully as it is heavy, using certified lifting equipment rated for the weight.
2. Position the boom and bucket on the ground and engage the safety locking lever before removal.
3. Remove covers and plugs from the top of the counterweight and attach lifting cables to the lifting point.
4. Remove four bolts to detach the counterweight and lift it off the retaining pin onto a suitable support.
Volvo ec140 lc ec140 lc excavator service repair manualfjjsekksekmm
1. The document provides specifications for two excavator models, the EC140LC and EC140LCM, including dimensions of the undercarriage, track components, ground contact pressures for different track shoe widths, and other technical details.
2. The instructions describe the process for installing and removing the superstructure of an excavator, including lifting points, torque specifications for fasteners, and reconnecting hydraulic and electrical components.
3. Additional documents provide service information for repair and maintenance of excavator undercarriage components like idlers, including diagrams of parts, assembly and disassembly instructions, and specifications for lubrication and torque values.
Hitachi zaxis 230 excavator service repair manualfjjsekksekmm
This document contains safety information and instructions for operating an excavator safely. It discusses recognizing safety symbols and signals, following safety instructions, preparing for emergencies, wearing protective clothing, protecting against noise, inspecting the machine, general precautions for the cab, using handholds and steps carefully, adjusting the operator's seat, fastening the seat belt, moving and operating the machine safely, operating only from the operator's seat, jump starting safely, not allowing riders, providing signals for jobs with multiple machines, confirming the machine's travel direction, and driving the machine safely. Safety is emphasized throughout to prevent injury and damage.
Hitachi zaxis 225 usrlc excavator service repair manualfjjsekksekmm
This document contains sections from a service manual for an excavator. It includes sections on safety alerts, safety precautions, operating procedures, and technical specifications. The sections advise operators to wear protective equipment, inspect the machine daily, follow all safety instructions, secure seat belts, and only start the engine from the operator's seat. Operators are instructed to drive safely and watch out for bystanders when moving or operating the machine.
Hitachi zaxis 135 us 3 class hydraulic excavator service repair manualfjjsekksekmm
This document provides safety information and guidelines for machine operators. It describes various safety symbols and signal words that are used to indicate hazards. It emphasizes the importance of carefully reading and following all safety instructions in the manual. It provides tips for safe operation, such as inspecting the machine, wearing protective equipment, using handholds and steps carefully, and adjusting the operator's seat properly.
Case tr320 compact track loader operation manualfjjsekksekmm
This document is an operator's manual for Alpha Series skid steer loaders and compact track loaders. It provides information on safety, controls, operation, transport, working operations, and maintenance. The manual contains instructions on starting and stopping the machine, moving and steering, operating attachments, transporting, and basic maintenance procedures. Safety warnings and precautions are emphasized throughout regarding the safe operation and maintenance of the equipment.
Case sr200 skid steer loader operation manualfjjsekksekmm
This document is an operator's manual for Alpha Series skid steer loaders and compact track loaders. It provides information on safety, controls, operation, transport, working operations, and maintenance. The manual contains instructions on starting and stopping the machine, moving and steering, operating attachments, transporting, and basic maintenance procedures. Safety warnings and precautions are emphasized throughout regarding the safe operation and maintenance of the equipment.
Case 750 l tier 3 crawler dozer operator manualfjjsekksekmm
This document is an operator's manual for 750L and 850L Tier 3 Crawler Dozers. It provides information on machine components, safety and decals, instruments and controls, operating instructions, lubrication and maintenance schedules. The manual contains chapters covering general information, safety, instruments and controls, operating instructions, lubrication/fluids, and maintenance/adjustments. It provides guidance for proper operation and maintenance of the crawler dozers.
Bobcat 943 hydrostatic pump component service repair manual sn allfjjsekksekmm
The document provides instructions for disassembling and assembling a hydrostatic pump. It lists the key steps which include removing charge tubelines, replenishing valves, center bracket, and separating the pump housing. Individual internal parts are then removed, such as the coupler, pintle levers, splined gear, and high pressure valves. The rotating group and drive shaft can be accessed by removing the center section and snap ring from the rear housing. Safety precautions are outlined and proper torque specifications provided for reassembly.
Volvo sd116 dx single drum roller service repair manualfjjsekksekmm
The document provides information on servicing the steering system of a machine. It describes the components of the steering system, including the steering wheel, cylinders, control unit and pump. It provides instructions for replacing the adjustable steering column and checking and adjusting the steering pressure. It also describes procedures for removing and installing a steering cylinder.
Volvo sd110 single drum roller service repair manualfjjsekksekmm
The machine frame consists of a rear frame assembly, front frame assembly, and swivel frame connecting the two. The rear frame supports components like tanks and engines, while the front frame supports the drum assembly.
The drum has a smooth surface and transmits vibration to loosen material via an eccentric assembly powered by a hydraulic motor.
Removing the drum assembly involves disconnecting hoses, loosening mounting bolts, lifting out the assembly which weighs nearly 4 tons, and removing vibration and drive side mounts. Installing follows the reverse process.
Volvo sd77 f single drum roller service repair manualfjjsekksekmm
This document provides instructions for removing a hydraulic motor from a machine. It describes draining the oil from the rear axle, disconnecting electrical and hydraulic connections from the motor, and removing mounting bolts. Safety precautions are noted, including using lifting devices rated for the motor's weight. Reinstallation involves reversing these steps, with adjustments if needed, and testing operation after refilling fluids.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
7. INTRODUCTION
Foreword - Important notice regarding equipment servicing
1650M WE
All repair and maintenance work listed in this manual must be carried out only by qualified dealership personnel,
strictly complying with the instructions given, and using, whenever possible, the special tools.
Anyone who performs repair and maintenance operations without complying with the procedures provided herein
shall be responsible for any subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional, or
local dealers, reject any responsibility for damages caused by parts and/or components not approved by the manu-
facturer, including those used for the servicing or repair of the product manufactured or marketed by the manufacturer.
In any case, no warranty is given or attributed on the product manufactured or marketed by the manufacturer in case
of damages caused by parts and/or components not approved by the manufacturer.
The manufacturer reserves the right to make improvements in design and changes in specifications at any time without
notice and without incurring any obligation to install them on units previously sold. Specifications, descriptions, and
illustrative material herein are as accurate as known at time of publication but are subject to change without notice.
In case of questions, refer to your CASE CONSTRUCTION Sales and Service Networks.
48048567 26/04/2017
3
8. INTRODUCTION
Safety rules
1650M WE
Personal safety
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible death or injury.
Throughout this manual you will find the signal words DANGER, WARNING, and CAUTION followed by special in-
structions. These precautions are intended for the personal safety of you and those working with you.
Read and understand all the safety messages in this manual before you operate or service the machine.
DANGER indicates a hazardous situation that, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
FAILURE TO FOLLOW DANGER, WARNING, AND CAUTION MESSAGES COULD RESULT
IN DEATH OR SERIOUS INJURY.
Machine safety
NOTICE: Notice indicates a situation that, if not avoided, could result in machine or property damage.
Throughout this manual you will find the signal word Notice followed by special instructions to prevent machine or
property damage. The word Notice is used to address practices not related to personal safety.
Information
NOTE: Note indicates additional information that clarifies steps, procedures, or other information in this manual.
Throughout this manual you will find the word Note followed by additional information about a step, procedure, or
other information in the manual. The word Note is not intended to address personal safety or property damage.
48048567 26/04/2017
4
9. INTRODUCTION
Safety rules - Personal safety
1650M WE
General maintenance safety
Keep area used for servicing the machine clean and dry. Clean up spilled fluids.
Service machine on a firm level surface.
Install guards and shields after servicing the machine.
Close all access doors and install all panels after servicing the machine.
Do not attempt to clean, lubricate, clear obstructions or make adjustments to the machine while it is in motion or while
the engine is running.
Always make sure working area is clear of tools, parts, other persons and pets before you start operating the machine.
Unsupported hydraulic cylinders can lose pressure and drop the equipment causing a crushing hazard. Do not leave
equipment in a raised position while parked or during service, unless securely supported.
Jack or lift the machine only at jack or lift points indicated in this manual.
Incorrect towing procedures can cause accidents. When towing a disabled machine follow the procedure in this man-
ual. Use only rigid tow bars.
Stop the engine, remove key and relieve pressure before disconnecting or connecting fluid lines.
Stop the engine and remove key before disconnecting or connecting electrical connections.
Scalding can result from incorrect removal of coolant caps. Cooling system operates under pressure. Hot coolant
can spray out if a cap is removed while the system is hot. Allow system to cool before removing cap. When removing
a cap turn it slowly to allow pressure to escape before completely removing the cap.
Replace damaged or worn tubes, hoses, electrical wiring, etc.
Engine, transmission, exhaust components, and hydraulic lines may become hot during operation. Take care when
servicing such components. Allow surfaces to cool before handling or disconnecting hot components. Wear protective
equipment when appropriate.
When welding, follow the instructions in the manual. Always disconnect the battery before welding on the machine.
Always wash your hands after handling battery components.
General battery safety
Always wear eye protection when working with batteries.
Do not create sparks or have open flame near battery.
Ventilate when charging or using in an enclosed area.
Disconnect negative (-) first and reconnect negative (-) last.
When welding on the machine, disconnect both terminals of the battery.
Do not weld, grind, or smoke near a battery.
When using auxiliary batteries or connecting jumper cables to start the engine, use the procedure shown in the oper-
ator’s manual. Do not short across terminals.
Follow manufacturer’s instructions when storing and handling batteries.
Battery post, terminals, and related accessories contain lead and lead compounds. Wash hands after handling. This
is a California Proposition 65 warning.
48048567 26/04/2017
5
10. INTRODUCTION
Battery acid causes burns. Batteries contain sulfuric acid. Avoid contact with skin, eyes, or clothing. Antidote (ex-
ternal): Flush with water. Antidote (eyes): flush with water for 15 minutes and seek medical attention immediately.
Antidote (internal): Drink large quantities of water or milk. Do not induce vomiting. Seek medical attention immedi-
ately.
Keep out of reach of children and other unauthorized persons.
Air-conditioning system
The air-conditioning system is under high pressure. Do not disconnect any lines. The release of high pressure can
cause serious injury.
The air-conditioning system contains gases that are harmful to the environment when released into the atmosphere.
Do not attempt to service or repair the system.
Service, repair, or recharging must be performed only by a trained service technician.
Personal Protective Equipment (PPE)
Wear Personal Protective Equipment (PPE) such as hard hat, eye protection, heavy gloves, hearing protection, pro-
tective clothing, etc.
Do Not Operate tag
Before you start servicing the machine, attach a ‘Do Not Operate’ warning tag to the machine in an area that will be
visible.
48048567 26/04/2017
6
11. INTRODUCTION
Safety rules - Ecology and the environment
1650M WE
Soil, air, and water quality is important for all industries and life in general. When legislation does not yet rule the
treatment of some of the substances that advanced technology requires, sound judgment should govern the use and
disposal of products of a chemical and petrochemical nature.
Familiarize yourself with the relative legislation applicable to your country, and make sure that you understand this
legislation. Where no legislation exists, obtain information from suppliers of oils, filters, batteries, fuels, anti-freeze,
cleaning agents, etc., with regard to the effect of these substances on man and nature and how to safely store, use,
and dispose of these substances.
Helpful hints
• Avoid the use of cans or other inappropriate pressurized fuel delivery systems to fill tanks. Such delivery systems
may cause considerable spillage.
• In general, avoid skin contact with all fuels, oils, acids, solvents, etc. Most of these products contain substances
that may be harmful to your health.
• Modern oils contain additives. Do not burn contaminated fuels and or waste oils in ordinary heating systems.
• Avoid spillage when you drain fluids such as used engine coolant mixtures, engine oil, hydraulic fluid, brake fluid,
etc. Do not mix drained brake fluids or fuels with lubricants. Store all drained fluids safely until you can dispose of
the fluids in a proper way that complies with all local legislation and available resources.
• Do not allow coolant mixtures to get into the soil. Collect and dispose of coolant mixtures properly.
• The air-conditioning system contains gases that should not be released into the atmosphere. Consult an air-condi-
tioning specialist or use a special extractor to recharge the system properly.
• Repair any leaks or defects in the engine cooling system or hydraulic system immediately.
• Do not increase the pressure in a pressurized circuit as this may lead to a component failure.
• Protect hoses during welding. Penetrating weld splatter may burn a hole or weaken hoses, allowing the loss of oils,
coolant, etc.
Battery recycling
Batteries and electric accumulators contain several substances that can have a harmful
effect on the environment if the batteries are not properly recycled after use. Improper
disposal of batteries can contaminate the soil, groundwater, and waterways. CASE
CONSTRUCTION strongly recommends that you return all used batteries to a CASE
CONSTRUCTION dealer, who will dispose of the used batteries or recycle the used
batteries properly. In some countries, this is a legal requirement.
Mandatory battery recycling
NOTE: The following requirements are mandatory in Brazil.
Batteries are made of lead plates and a sulfuric acid solution. Because batteries contain heavy metals such as lead,
CONAMA Resolution 401/2008 requires you to return all used batteries to the battery dealer when you replace any
batteries. Do not dispose of batteries in your household garbage.
Points of sale are obliged to:
• Accept the return of your used batteries
• Store the returned batteries in a suitable location
• Send the returned batteries to the battery manufacturer for recycling
48048567 26/04/2017
7
12. SERVICE MANUAL
Engine
1650M Extra Long Track (XLT), Bulldozer (BD) Blade - Tier 4B (final) and
Stage IIIB [NGC107000 - ]
1650M Extra Long Track (XLT), Power Angle Tilt (PAT) Blade - Tier 4B (final)
and Stage IIIB [NGC107000 - ]
1650M Wide Track (WT) / Low Ground Pressure (LGP), Power Angle Tilt (PAT)
Blade - Tier 4B (final) and Stage IIIB [NGC107000 - ]
48048567 26/04/2017
10
13. Engine - Engine and crankcase
Engine - Assemble - Driveshaft alignment, engine and tandem
pumps
1650M WE
RAIL13DOZ1485FA 1
Item Description
1 Shaft center to center 9:30 hole
2 Shaft center to center 2:30 hole
3 Flywheel housing
4 Pump shaft
NOTE: All instructions specified are from the perspective of someone sitting in the operator’s seat, facing the blade.
1. Angle of the driveshaft is 4.85°.
2. Coming off the pump shaft centerline, the driveshaft is
angled up 4.07° and to the left 2.63°.
3. The distance from the flywheel housing to the pump
mounting bracket is 176.00 mm (6.93 in)
48048567 26/04/2017
10.1 [10.001] / 4
14. Engine - Air cleaners and lines
Air cleaner - Remove
1650M WE
1. Park the machine on a firm level surface.
RAIL12DOZ0403AA 1
2. Lower the blade and the ripper tool (if so equipped).
3. Engage the parking brake and turn the ignition key to
the OFF position.
4. Locate the battery master disconnect switch behind the
panel on the left side of the cab.
RAIL12DOZ0403AA 2
5. Switch the master battery disconnect switch to the OFF
position.
RAPH12DOZ0044AA 3
NOTE: Wait 90 seconds after engine shutdown before turning off battery disconnect. After engine shutdown, the
Selective Catalytic Reduction (SCR) system does a purge cycle and the supply module continues to run.
48048567 26/04/2017
10.2 [10.202] / 3
15. Engine - Air cleaners and lines
6. Open the left hand side engine compartment access
door.
RAIL12DOZ0832BA 4
7. Locate the engine air intake filter housing.
RAIL12DOZ0833BA 5
8. Release the retaining clips and remove the engine air
intake filter housing cover.
RAIL12DOZ0834BA 6
48048567 26/04/2017
10.2 [10.202] / 4
16. Engine - Air cleaners and lines
9. Remove the primary air filter element.
RAIL12DOZ0835BA 7
10. Remove the secondary air filter element.
RAIL12DOZ0837BA 8
11. Remove any additional debris from inside the engine
air intake filter housing before installing the air filter
elements.
RAIL12DOZ0839BA 9
Next operation:
Air cleaner - Install (10.202)
48048567 26/04/2017
10.2 [10.202] / 5
17. Engine - Air cleaners and lines
Air cleaner - Install
1650M WE
Prior operation:
Air cleaner - Remove (10.202)
1. Install the secondary air filter element into the air filter
housing.
RAIL12DOZ0838BA 1
2. Install the primary air filter element into the air filter
housing.
RAIL12DOZ0836BA 2
3. Attach the engine air intake filter housing cover.
RAIL12DOZ0840BA 3
48048567 26/04/2017
10.2 [10.202] / 6
18. Engine - Air cleaners and lines
4. Secure the retaining clips which hold the engine air in-
take filter housing cover in place.
RAIL12DOZ0834BA 4
NOTE: Make sure that the engine air intake filter housing and forms a tight seal with the cover.
5. Close the left side engine compartment panel and se-
cure it with the latch.
RAIL12DOZ0832BA 5
6. Switch the master battery disconnect switch to the ON
position.
RAPH12DOZ0044AA 6
48048567 26/04/2017
10.2 [10.202] / 7
19. Engine - Air cleaners and lines
7. Close the panel on the left side of the machine below
the cab and secure the latch.
RAIL12DOZ0403AA 7
8. Start the engine and confirm normal operations. Re-
move any fault codes from the system.
48048567 26/04/2017
10.2 [10.202] / 8
20. Engine - Fuel filters
Fuel filters - Replace
1650M WE
WARNING
Fire hazard!
When handling diesel fuel, observe the following precautions:
1. Do not smoke.
2. Never fill the tank when the engine is running.
3. Wipe up spilled fuel immediately.
Failure to comply could result in death or serious injury.
W0099A
Prior operation:
Keep all unauthorized personnel clear of the area. Park the machine on level ground, in neutral with the parking brake
applied, and the attachment lowered to the ground, turn off the engine, remove the key, and verify that engine com-
ponents have cooled or avoid contact. Make sure that all residual pressure is relieved from circuits before beginning
maintenance.
1. Locate the fuel filter in the right rear access compart-
ment. Close the fuel shut off valve (1) to prevent fuel
leakage.
2. Clean the fuel filter head, the outside of the fuel filter,
and remove any dirt and debris around the area that
might contaminate the system.
RAIL13DOZ1594AA 1
3. Turn the fuel filter (2) counterclockwise and remove.
Capture any fuel remaining in the lines or the fuel filter,
and discard properly.
4. Apply a thin layer of clean oil to the gasket on the new
fuel filter.
5. Install the filter. Use your hands to tighten the fuel filter
1/2 to 3/4 turn after the fuel filter makes contact with the
filter head.
6. Open the fuel shut off valve. Check for leaks.
RAIL13DOZ1594AA 2
NOTICE: Never use a filter wrench to tighten a new fuel filter on install.
48048567 26/04/2017
10.3 [10.206] / 3
21. Engine - Fuel filters
Removing air from the fuel system
1. Remove air from the fuel system after changing the fuel
filter. Removing air from the fuel system may also be
necessary if the machine runs out of fuel, if the fuel
system has been serviced, or if the machine has been
in storage.
2. Make certain that the fuel tank shutoff is in the ON po-
sition.
3. Loosen the air bleed screw one or two turns.
4. Operate the hand primer until no air bubbles flow from
around the air bleed screw.
5. Tighten the air bleed screw.
6. Start the engine, and check for leaks.
RAPH12DOZ0056AA 3
48048567 26/04/2017
10.3 [10.206] / 4
22. Engine - Fuel tanks
Fuel tank - Remove
1650M WE
1. Park machine on a firm, level surface.
2. Lower all equipment to the ground.
3. Engage parking brake and shut engine off.
4. Relieve system of hydraulic pressure by actuating all
hydraulic functions. Remove key when complete.
NOTE: Wait 90 seconds after engine shutdown before turning master battery disconnect switch OFF. After engine
shutdown, the Selective Catalytic Reduction (SCR) system module continues to run and conducts a purge cycle.
5. Turn master battery disconnect switch to the OFF po-
sition.
6. Remove cab from machine. See Cab and platform -
Remove (90.150).
7. Remove DEF/AdBlue tank. See Diesel Exhaust Fluid
(DEF)/AdBlue®/ARLA tank - Remove (10.500).
8. Drain fuel tank.
9. Remove fuel drain hose (1).
NOTE: DEF/AdBlue tank shown installed.
10. Remove fuel hoses and electrical connectors (2) from
top of fuel tank.
RAIL12DOZ0731BA 1
NOTICE: Fuel tank weighs approximately 91 kg (200 lb). Use proper lifting equipment to prevent personal injury or
property damage.
11. Attach an appropriate lifting device to fuel tank.
12. Remove fuel tank strap (1) and remove fuel tank.
NOTE: DEF/AdBlue tank shown installed.
RAIL12DOZ0735BA 2
13. Repair or replace components as necessary.
48048567 26/04/2017
10.4 [10.216] / 3
23. Engine - Fuel tanks
Fuel tank - Install
1650M WE
NOTICE: Fuel tank weighs approximately 91 kg (200 lb) empty. Use proper lifting equipment to prevent personal
injury or property damage.
1. Attach an appropriate lifting device to fuel tank.
2. Place fuel tank in machine.
3. Install fuel tank strap (1).
NOTE: DEF/AdBlue tank shown installed.
RAIL12DOZ0735BA 1
4. Remove lifting device from fuel tank.
5. Install fuel hoses and electrical connectors (1) to top of
fuel tank.
NOTE: DEF/AdBlue tank shown installed.
6. Install fuel drain hose (2) to tank.
RAIL12DOZ0731BA 2
7. Install DEF/AdBlue tank. See Diesel Exhaust Fluid
(DEF)/AdBlue®/ARLA tank - Install (10.500).
8. Install cab. See Cab and platform - Install (90.150).
48048567 26/04/2017
10.4 [10.216] / 4
24. Engine - Engine lubrication system
Engine oil filter - Replace
1650M WE
Prior operation:
Keep all unauthorized personnel clear of the area. Park the machine on level ground, in neutral with the parking brake
applied, and the attachment lowered to the ground, turn off the engine, remove the key, and verify that engine com-
ponents have cooled or avoid contact. Make sure that all residual pressure is relieved from circuits before beginning
maintenance.
Service specifications
Type of oil CASE AKCELA UNITEK NO. 1™ SBL CJ-4 SAE
10W-40
Capacity (with filter change) 16.4 l (17.3 US qt)
Capacity (without filter change) 15.6 l (16.5 US qt)
1. Open the left-hand front and right-hand front access
doors. Secure the access doors with the door struts
(1).
2. Remove the oil dipstick and the oil fill cap.
NOTE: Oil drains faster when the oil is warm (but not hot)
and the oil dipstick and oil fill cap is removed.
3. Use a suitable container to collect the drained oil.
RAPH12DOZ0068AA 1
4. Remove the bolts and the engine oil access plate under
the engine. Locate the oil drain plug.
RAPH12DOZ0095AA 2
NOTE: If the machine is so equipped, and the special draining equipment is available, use the engine oil environmen-
tal drain located in the left side engine access door.
5. Remove the engine oil drain plug (2), and allow the oil
to drain.
RAPH12DOZ0096AA 3
48048567 26/04/2017
10.5 [10.304] / 3
25. Engine - Engine lubrication system
6. Locate the oil filter (3) in the right front engine compart-
ment. Clean the area around the filter of dirt and debris.
RAIL12DOZ0192AA 4
Replace oil filter
7. Turn the oil filter (3) housing counterclockwise to re-
move. Remove and discard the filter following local en-
vironmental and waste regulations.
8. Apply a thin layer of clean oil to the new filter gasket.
9. Turn the new oil filter onto the base until the gasket
makes contact with the base, and then turn by hand an
additional 3/4 turn. Never use a filter wrench to install
a new filter.
RAIL12DOZ0192AA 5
10. Close the oil drain.
11. Fill the engine with the proper amount of oil through
the fill port (4).
12. Start the engine and run at idle speed. Check the
engine oil filter and remote drain for leaks.
13. After 2 min stop the engine.
14. Wait for the engine oil to drain down for an accurate
reading on the dipstick (5).
RAPH12DOZ0069AA 6
48048567 26/04/2017
10.5 [10.304] / 4
26. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
27. Engine - Engine lubrication system
15. Check the dipstick (5), and add additional oil, if nec-
essary.
16. Check for leaks around the filter and drain.
17. Secure the lower engine access plate.
RAIL12DOZ0171AA 7
NOTE: The oil flow rate can be improved if the oil is slightly warm and the oil fill cap or dipstick is removed from the
engine while draining.
48048567 26/04/2017
10.5 [10.304] / 5
28. Engine - Engine lubrication system
Crankcase ventilation system - Remove
1650M WE
1. Park the Dozer on level ground. Lower the blade to the
ground and turn OFF the engine.
RAPH12DOZ0102AA 1
2. Turn the electrical power to OFF.
3. Remove the left side cover plate.
RAPH12DOZ0068AA 2
4. Remove the right side cover plate.
RAPH12DOZ0066AA 3
48048567 26/04/2017
10.5 [10.304] / 6
29. Engine - Engine lubrication system
5. Disconnect the electrical plug (1) at the filter restriction
valve.
6. Loosen the inner hose clamp (2) and slide the hose (3)
off the air cleaner.
RAPH12DOZ0248AA 4
7. On left side of machine, loosen the intake clamp (1) and
the aspiration tube clamp (2).
RAPH12DOZ0251AA 5
8. Disconnect the hoses from the air cleaner.
RAPH12DOZ0254AA 6
9. Remove the three bolts from the bracket holding the air
cleaner in place.
RAPH12DOZ0252AA 7
48048567 26/04/2017
10.5 [10.304] / 7
30. Engine - Engine lubrication system
10. Remove the air cleaner from the machine.
RAPH12DOZ0255AA 8
11. Open the junction block fuse cover (1).
ATTENTION: Power MUST be off before accessing the
junction block fuses.
RAPH12DOZ0260AA 9
12. Disconnect the inside cable (1). Remove the two bolts
holding the bracket (2) to the cross member frame.
Pull bracket away from the frame.
RAPH12DOZ0308AA 10
13. Loosen the clamp and remove the vent tube from the
valve cover.
RAPH12DOZ0257AA 11
48048567 26/04/2017
10.5 [10.304] / 8