Download to read offline
![Table/Figure Format
Table and figures should be numbered chapter wise. For example, the fourth figure in
Chapter 5 should bear the number Figure 5.4 or Fig.5.4.
Table number and title should be placed above the table. Reference for Table and Figures
reproduced from elsewhere should be cited in the last and separate line in the table and
figure caption, e.g. (after McGregor [12] ).( Source of Table)
Binding
The project should be hard cover bound in leather or rexin with the following colour
specification:
Colour Black
Lettering All lettering should be embossed in gold.
Bound back
The degree, the name of the candidate and the year of submission should also be
embossed on the bound (side) in gold.
Blank sheets
In addition to the white sheets (binding requirement) two white should be put at the
beginning and end of the Project.
List of Figures and Tables
Two separate lists of Figure caption and Table titles along with their numbers and
corresponding page numbers against them shall follow the Contents.](https://image.slidesharecdn.com/bcaprojectguidelistsummer2024932952-240605173102-8c67214f/85/BCAPROJECTGUIDELISTSUMMER2024_932952-pdf-13-320.jpg)
BCAPROJECTGUIDELISTSUMMER2024_932952.pdf
- 1. Sr.No. PRN StudentName M o b Course & SEM Guide Name Guide Contact Number Guide Email id 1 2228100137 RAHUL KUMAR RESWAL Mr.Surender Singh 2 2228100589 ANIRUDH SAYAL Mr.Surender Singh 3 2228100138 ANKIT BISHT Mr.Surender Singh 4 2228100150 VISHAL Mr.Surender Singh 5 2228100152 SONU Mr.Surender Singh 6 2228100155 ANKIT YADAV Mr.Surender Singh 7 2228100159 SHASHANK CHAWLA Mr.Surender Singh 8 2228100162 RITIKA SINGH Mr.Surender Singh 9 2228100165 HETAIN SHARMA Mr.Surender Singh 10 2228100656 KUSHAGRA SHARMA Mr.Surender Singh 11 2228100134 SHIVAM KANT RAI Mr.Surender Singh 12 2228100135 AVLEEN KAUR Mr.Surender Singh 13 2228100163 HANSRAJ SINGH Mr.Surender Singh 14 2228100168 ASHUTOSH KUMAR Mr.Surender Singh 15 2228100377 AARTI SHOKEEN Mr.Surender Singh 16 2228100805 SUMIT SINGH Mr.Surender Singh 17 2228100823 GIRISH PRATAP SINGH Mr.Surender Singh 18 2228100652 ABHINAV SHARMA Ms.Shailza Aggarwal 19 2228100885 ADITYA KUMAR Ms.Shailza Aggarwal 20 2228100816 ABDUR REHMAN Ms.Shailza Aggarwal 21 2228100146 TAYYAB Ms.Shailza Aggarwal 22 2228100770 SURYAKANT PRADHAN Ms.Shailza Aggarwal 23 2228100148 AALIM QURESHI Ms.Shailza Aggarwal 24 2228100153 PRAMOD Ms.Shailza Aggarwal 25 2228100157 SAURABH Ms.Shailza Aggarwal 26 2228100635 SOHAIL ALI Ms.Shailza Aggarwal 27 2228100139 PALAK JAIN Ms.Shailza Aggarwal 28 2228100161 PRINCE KUMAR SINGH Ms.Shailza Aggarwal 29 2228100164 SHIVAM GOGIA Ms.Shailza Aggarwal 30 2228100717 RITIK CHHILLAR Ms.Shailza Aggarwal 31 2228100151 RITIK SAINI Ms.Shailza Aggarwal 32 2228100167 DEVANSHU SINGH Ms.Shailza Aggarwal 33 2228100166 VIVEK BAJPAI Ms.Shailza Aggarwal 34 2228100144 AVNEESH KUMAR JHA Ms.Shailza Aggarwal 35 2228100156 GUNJAN Ms.Shailza Aggarwal 36 2128100712 KARISHMA . Ms.Shailza Aggarwal Sr.No. PRN Student Name M o b Course & SEM Guide Name Guide Contact Number Guide Email id 1 2228100031 ABHIMANYU SINGH Mr. Shekhar Kundra 2 2228100032 PRINCE KUMAR Mr. Shekhar Kundra 3 2228100033 KOMAL Mr. Shekhar Kundra 4 2128100712 KARISHMA . Mr. Shekhar Kundra 6 2128100201 ARYAN SRIVASTAV Mr. Shekhar Kundra 7 2128100158 PIYUSH PATHRIA Mr. Shekhar Kundra 8 2128100159 GAURAV KUMAR SINGH Mr. Shekhar Kundra Sr.No. PRN Student Name M o b Course & SEM Guide Name Guide Contact Number Guide Email id 1 2128100559 SHUBHAM KUMAR 2 2128100714 TUSHAR ADESARA 3 2128100381 POOJA 4 2128100331 SIRJAN KAUR 5 2128101183 ARYAN CHAUBEY 6 2128100873 AMIT KUMAR 7 2128100393 JASKARAN SINGH 8 2128100412 SAHIL 9 2128100423 MANNAN KAPOOR 10 2128101146 MISHRA RICHA KANHAIYA 11 2128101241 SAKSHI GULATI 12 2128100369 ROHIT KUMAR SINGH 13 2128100413 BITU KUMAR 14 2128100716 BITTU KUMAR 15 2128100584 ABHISHEK KUMAR SINGH 16 2128100774 AMAN KUMAR 17 2128100715 PRADEEP PANDEY 18 2128100750 MUSKAN SAINI 19 2128100713 HARSHMEET SINGH SABHARWAL 9811945176 shekhar.kundra@gmail.com BCA Project guide list for Summer 2024 examination BHARATI VIDYAPEETH , DEEMED TO BE UNIVERSITY SCHOOL OF DISTANCE EDUCATION, NEW DELHI BCA IV BCA IV 9899676766 Surendersingh.Khatri@gmail.com 8527980444 shlzggrwl@gmail.com BCA VI Ms. Nimisha Arora 9911386333 nimisha_banga@yhaoo.com BCA V
- 2. Dr.Megha Sehgal Dr.A.R.Deshmukh Academic coordinator CDOE New Delhi Director, CDOE, New Delhi Note : 1) Students are requested to follow project guidelines given . 2) E-mail your project report to your respective guides for approval before 25 April 2024 . Without guide approval no project wil be accepted. 3) The last date for final project submission is 30th April 2024 . 4) Submit your project report in Hard copy with proper certification Form . 5)Project will not be accepted in any other way i.e. Email, whatsapp etc . Kindly ensure to submit hardcopy project only in the campus itself . 6) If any student name is not present in the list kindly contact Dr.Megha sehgal Coordinator BCA immediately .
- 3. Table of Contents Beforeproceeding to Chapter – I following should get mentioned in the report: Student undertaking Certificate from Internal Guide Certificate from the Director Preface Acknowledgement CHAPTER 1 INTRODUCTION 1.1 Introduction about Project 1.2 Need of Computerization of System 1.3 Proposed Software (What would s/w accomplish?) 1.4 Importance of the Work CHAPTER 2 SYSTEM ANALYSIS 2.1 Feasibility Study of s/w includes its types 2.2 Analysis Methodology (Types) 2.3 Choice of Platforms s/w & h/w 2.3.1 Software used 2.3.2 Hardware used
- 4. CHAPTER 3 SYSTEMDESIGN 3.1 Design methodology 3.2 Database Design 3.3 Screen Design 3.4 Report Design (Include DFD/ERD/OOAD/ Screen Shots/ Reports & Data Base Design) CHAPTER 4 TESTING AND IMPLEMENTATION 4.1 Testing Methodology (Types) 4.2 Unit Testing 4.3 Module Testing 4.4 System Testing 4.5 Alpha/ Beta Testing 4.6 White Box Black Box Testing 4.7 Implementation 4.8 Post Implementation CHAPTER 5 CONCLUSION AND REFERENCES 5.1 Conclusion 5.2 Limitation of System 5.3 Future Scope for Modification
- 5. 5.4.1 H/W Requirement 5.4.2S/W Requirement 5.5 References/ Bibliography CHAPTER 6 ANNEXURES A‐1 Menu Flow Diagram A‐2 Data DictionaryA‐3 Sample Input A‐4 Sample Output OOAD (use case diagrams) if used this approach.
- 6. Typing Instructions andProject Performa for the courses BCA and MCA projects
- 7. Important Instructions: Students arerequired to attach following documents in their project hard copy 1. Guide’s certificate 2. Director’s Certificate (The both certificates on the college letterhead will be provided from SDE office.) To get the above certificates, students are required to bring with them following papers: 1. Approval mail of project guide (Printed hard copy) 2. Company certificate photo copy 3. Summary format (format copy is available at photo copy shop) Student are also required to include student declaration, Acknowledgment and Preface in the report
- 8. For MCA andBCA students 1. Binding for MCA-I to MCA-III Total No. of copies: Two (Spiral bound) and 2. MCA-IV - One copy hard cover bound 3. The project should be hard cover bound in leather or Rexin with the following color specification. 4. The Project Hardbound color for MCA, BCA ( Black Rexin with gold Embossing). 5. Only Embossing will be accepted (Kindly do not get Screen Printing as it is strictly not acceptable). 6. The Hard Bound should have Spine with the Course, Title and Academic year embossed on it. 7. The order of the initial pages should be Cover page Certificate from the company (if any) Certificates from the College i) Guide Certificate of Originality of the project ii) Director Certificate Preface Acknowledgement Table of Contents / INDEX NOTE: If your project title and guide are confirm, you can order your hard bound so that it is ready by the time your printouts are ready which can save you from time constraints.
- 9. Title of Project AProject Report Submitted in partial fulfillment of the requirements for the Award of degree (Name of the Course) 20XX – 20YY Submitted by: Guided by: (Student’s Name) (Internal Guide) BHARATI VIDYAPEETH DEEMED UNIVERSITY SCHOOL OF DISTANCE EDUCATION Academic Study Center - BVIMR, New Delhi An ISO 9001:2008 Certified Institute NAAC Accredited Grade “A” University
- 10. Student Undertaking Certificate ofOriginality I (Name of Student) (Course and Sem) would like to declare that the project report entitled “ (Title of your project) Submitted to Bharati Vidyapeeth University Pune, School of Distance Education Pune, Academic Study Centre BVIMR New Delhi in partial fulfillment of the requirement for the award of the degree. It is an original work carried out by me under the guidance of (Name of Project Guide). All respected guides, faculty member and other sources have been properly acknowledged and the report contains no plagiarism. To the best of my knowledge and belief the matter embodied in this project is a genuine work done by me and it has been neither submitted for assessment to the University nor to any other University for the fulfillment of the requirement of the course of study. Student Name with Signature
- 11. Certificate from theCompany/Organization (On Company Letter head) This is to certify that (Name of the student) son/daughter of (name of the father) pursuing MBA from Bharati Vidyapeeth Deemed University School of distance education, New Delhi has successfully completed Project Report in our organization on the topic titled, “Title of the Project” from to 20XX. During his/ her Internship project tenure in the organization/ company, we found him/ her hard working, sincere and diligent person and his/ her behavior and conduct was good during the project. We wish him/her all the best for his/ her future endeavors. Comments of Guide 1. 2. 3. Name and Signature of the Mentor (Corporate Mentor) Designation
- 12. REPORT FORMAT/ TYPINGINSTRUCTIONS Total No. of Copies need to be Submitted : One Original Typed (no photocopy) C.D. : One Paper Quality : Executive Bond, 100 gsm (thickness) The size of the paper : A 4 Border Indents Top : 1.0 Inch Bottom : 1.0 Inch Left : 1.5 Inch. Right : 1.0 Inch. Page Numbering : Bottom centered Font Type : Times New Roman/ Century Gothic only Color : Black Only Sizes : Uniform & Consistent throughout the report Normal Text-12, Chapter Heading-16, Titles-14 Line Spacing : 1.5 Graphical Presentation : Colour/ Black & White Printing : single sided Paragraph format Vertical space between paragraphs should be of about 2.5 line spacing. A single lined of a paragraph should not be left at the top or bottom of a page Chapter and Section format Each chapter should begin on a fresh page. Chapter number and title of the Chapter, subheading of the chapter should be printed at the center of the Page. Sections and Sub-sections A chapter can be divided into Sections, Sub-sections and Sub-Sub-sections so as to present different concepts separately. Sections and sub-sections can be numbered using decimal points, e.g., 2.2 for the second Section in Chapter 2 and 2.3.4 for the fourth Sub-section in third section of Chapter 2. Chapters, Sections and Sub-Sections should be included in the Contents with page numbers flushed to the right. Further subsections need not be numbered or included in the contents.
- 13. Table/Figure Format Tableand figures should be numbered chapter wise. For example, the fourth figure in Chapter 5 should bear the number Figure 5.4 or Fig.5.4. Table number and title should be placed above the table. Reference for Table and Figures reproduced from elsewhere should be cited in the last and separate line in the table and figure caption, e.g. (after McGregor [12] ).( Source of Table) Binding The project should be hard cover bound in leather or rexin with the following colour specification: Colour Black Lettering All lettering should be embossed in gold. Bound back The degree, the name of the candidate and the year of submission should also be embossed on the bound (side) in gold. Blank sheets In addition to the white sheets (binding requirement) two white should be put at the beginning and end of the Project. List of Figures and Tables Two separate lists of Figure caption and Table titles along with their numbers and corresponding page numbers against them shall follow the Contents.
- 14. Typing Sample Format Left Margin 1.5 inch TopMargin 1 inch Right Margin 1 inch Chapter Heading size -16 Titles size -14 below is the normat text size -12 Margin between lines 1.5 line The Business establishment may be a Company, Industrial unit, Wholesaler, Retailer, Distributor Office, Dealers, Company Showroom, Company Office, Service Organizations, Government Offices, NGO`s etc. Students must read these guidelines carefully and clarify doubts, if any, before proceeding for Summer Training Project. Margin between paragraph 2 line All the students enrolled for BCA Programme have to undergo compulsorily the SUMMER TRAINING for 50 working days in an organization. The objective of this training is to test the ability of the students to work on any topic/problem related to any functional area. The problem/topic can also be assigned by the organization in which the students undergo in-plant training in the absence of which students is free to select any topic/problem as his/her own accord. Margin between paragraph 2 line Keeping in view the first year curriculum for giving exposure to different functional areas and research methodology in BCA, the students have to collect the data relevant to their topic or problem and analyze the same methodologically, make intelligent observations and offer some practical suggestions. In order to complete the task following Chapter Scheme is suggested which can be adopted with or without modifications. Bottom Margin 1 inch Page No. 1
- 15. REPORT FORMAT/ TYPINGINSTRUCTIONS *************************** A Project Report Submitted in the partial fulfillment of the requirement for the award of the Degree of **************************** 20**-20** Submitted By: Under the Guidance of: ****************************** BHARATI VIDYAPEETH DEEMED UNIVERSITY SCHOOL OF DISTANCE EDUCATION Academic Study Center - BVIMR, New Delhi An ISO 9001:2008 Certified Institute Reaccredited Grade “A” University by NAAC This is Spine
- 16. The spine ofthe book is an important aspect in Project design, especially in the cover design. When the project are stacked up or stored in a shelf, the spine is the only visible surface that contains the information about the book.