This document provides instructions for building a simple aquaponics system using plastic barrels. It begins with background on how the author got interested in aquaponics. It then lists the parts needed, which are mostly common PVC pipes and plastic barrels. The document goes on to describe setting up the fish tank, constructing grow beds from barrels, building the system stand, and assembling the flood valve system. It provides guidance on stocking the system with fish and plants and maintaining the system over time. The system is designed to be a simple, inexpensive introduction to aquaponics using widely available materials.
Organic business guide developing sustainable value chains with smallholdersBoni
This document provides an overview of developing sustainable value chains between smallholder organic farmers and buyers. It discusses organic production and Fair Trade principles, the importance of understanding markets and building partnerships along the supply chain. It also addresses challenges in organic farming, business planning, organizing producers, certification, quality control, marketing and moving to larger scale operations. The guide is intended to help entrepreneurs and facilitators establish successful organic businesses that benefit farmers and promote rural development.
This document provides information on designing and setting up an aquaponics system. It discusses the components of an aquaponics system including fish tanks, grow beds, pumps, and pipes. It also covers suitable fish species like tilapia and perch, as well as vegetables and herbs that can be grown. Guidelines are provided for calculating system volumes, stocking fish densities, and maintaining water quality.
This document provides an overview of aquaponics systems, including:
- Basic components include a fish tank, grow beds, and water pump.
- Common system types are intermittent flow, continuous flow, and ebb and flow.
- Ebb and flow systems use devices like barrel-ponics systems or pivot outlets to automate flooding and draining of grow beds.
- Considerations for plants, fish, and operating the system are discussed.
Aquaponics introduction to a gardening and farming revolutionRachelPaul25
Imagine a Garden Where There's No More Weeds or Soil Pests, No Tilling or Cultivating, No Fertilizer Spreading or Compost Shredding, No Manure Spreading or Irrigating, and No Tractor Shed Required...
And Yet... Your Plants Grow Abundantly, Taste Amazing, and Are Extremely Healthy.
Here's How It Works: AQUAPONICS !
The process is revolutionary because with it your plants grow 100% to 50% faster, and you can grow up to
TEN times the plants in the same amount of space.
How does it work?
Basically, it turns normal gardening on organic super-drive as it feeds rich ALIVE natural nutrients to your plants 24 hours per day, 7 days a week, 365 days a year.
Learn more about aquaponics, and how to build your own system at https://snip.ly/iq9m9l
Travis built an aquaponics system over several weeks. He obtained a large fish tank, cleaned and resealed it. He set up the tank in a greenhouse and added pumps and piping to circulate water. Travis added goldfish to the tank and built a plant stand, adding gravel beds. He planted lettuce and has been monitoring the system daily.
The Cordyline stricta (narrow-leaved palm lily) and Doryanthes excelsa (Gymea lily) are accent plants suitable for gardens. The Cordyline stricta grows 2-5m high with long strap-like leaves and small white to purple flowers, preferring semi-shade and morning sun. The Doryanthes excelsa grows 4.7-6m high with sword-like leaves and large red trumpet flowers on tall stems, attracting birds and tolerating full sun or partial shade. Both plants are drought tolerant once established and suitable for creating tropical effects or as feature plants in gardens.
Hooks For Essays Guide - Check Out How To Write ALindsay Alston
1. Ricardo explains comparative advantage as the theory that even nations relatively poor at producing everything have some things they can produce relatively well. Nations should specialize in what they can produce at a lower opportunity cost and trade for the rest.
2. Before trade, Ed's grandchild had eye problems and poor vision that could not be healed without modern medicine.
3. After trade allowed global specialization and cooperation, Ed's grandchild was able to access life-saving medicine developed by Merck and have good vision, now doing homework in front of a large TV and computer.
Introduction - How to write an essay - LibGuides at University of .... How to Improve Your Academic Writing with the Right Essay Structure?. Guide to Essay Writing Harris University. How to Structure an Essay: A Guide for College Students. 15 Essay Format Templates - PDF. A Detailed Guide on How to Write the Best Essay Urgent Homework Blog. Essay Structure: The Proper Way to Set Up Paragraphs for Your Essay .... History Essay: Structure of essay. College Essay Format: Simple Steps to Be Followed. How To Write a Thesis Statement: Step-By-Step Part 1 Essay Writing. A Comprehensive Essay Structure Guide: Tips and Formats. How to Write a Personal Essay Guide by EssayHub Writers. 32 College Essay Format Templates amp; Examples - TemplateArchive. Structure for essay writing - The Writing Center.. the structure of an outline for a research paper, including text and .... Quick Way To Write Essay - Anna Blog. Structure of essay - презентация онлайн. Writing a Descriptive Essay The Structure of a Descriptive Essay .... Analytical Essay Introduction Structure Telegraph. History Essay: Structure of an essay example. What Is The Structure That An Essay Should Have? - Sweet Captcha. Paragraph Structure in Research Paper Meaning, Importance, and Use. Basic Essay Structure. How to Write a Great Essay Quickly! ESL Buzz. College Essay Examples - 9 in PDF Examples. Pin by Kat Compton on writing an essay Essay writing skills, Essay .... Paragraph Analysis - Academic English UK. Sample Essay. Pin on ESOL ADVANCEd. Argument Essay Structure Essay writing skills, Teaching writing .... High School Essay Writing Sample on Topics and Structure. essay structure Charts. Essay Structure - Tips to Format Essay With Examples GoAssignmentHelp .... A scheme which illustrates structure of every essay English grammar .... Structuring Your Essay: Academic Writing Part III Princeton ... Structure For Essay Writing Structure For Essay Writing
Organic business guide developing sustainable value chains with smallholdersBoni
This document provides an overview of developing sustainable value chains between smallholder organic farmers and buyers. It discusses organic production and Fair Trade principles, the importance of understanding markets and building partnerships along the supply chain. It also addresses challenges in organic farming, business planning, organizing producers, certification, quality control, marketing and moving to larger scale operations. The guide is intended to help entrepreneurs and facilitators establish successful organic businesses that benefit farmers and promote rural development.
This document provides information on designing and setting up an aquaponics system. It discusses the components of an aquaponics system including fish tanks, grow beds, pumps, and pipes. It also covers suitable fish species like tilapia and perch, as well as vegetables and herbs that can be grown. Guidelines are provided for calculating system volumes, stocking fish densities, and maintaining water quality.
This document provides an overview of aquaponics systems, including:
- Basic components include a fish tank, grow beds, and water pump.
- Common system types are intermittent flow, continuous flow, and ebb and flow.
- Ebb and flow systems use devices like barrel-ponics systems or pivot outlets to automate flooding and draining of grow beds.
- Considerations for plants, fish, and operating the system are discussed.
Aquaponics introduction to a gardening and farming revolutionRachelPaul25
Imagine a Garden Where There's No More Weeds or Soil Pests, No Tilling or Cultivating, No Fertilizer Spreading or Compost Shredding, No Manure Spreading or Irrigating, and No Tractor Shed Required...
And Yet... Your Plants Grow Abundantly, Taste Amazing, and Are Extremely Healthy.
Here's How It Works: AQUAPONICS !
The process is revolutionary because with it your plants grow 100% to 50% faster, and you can grow up to
TEN times the plants in the same amount of space.
How does it work?
Basically, it turns normal gardening on organic super-drive as it feeds rich ALIVE natural nutrients to your plants 24 hours per day, 7 days a week, 365 days a year.
Learn more about aquaponics, and how to build your own system at https://snip.ly/iq9m9l
Travis built an aquaponics system over several weeks. He obtained a large fish tank, cleaned and resealed it. He set up the tank in a greenhouse and added pumps and piping to circulate water. Travis added goldfish to the tank and built a plant stand, adding gravel beds. He planted lettuce and has been monitoring the system daily.
The Cordyline stricta (narrow-leaved palm lily) and Doryanthes excelsa (Gymea lily) are accent plants suitable for gardens. The Cordyline stricta grows 2-5m high with long strap-like leaves and small white to purple flowers, preferring semi-shade and morning sun. The Doryanthes excelsa grows 4.7-6m high with sword-like leaves and large red trumpet flowers on tall stems, attracting birds and tolerating full sun or partial shade. Both plants are drought tolerant once established and suitable for creating tropical effects or as feature plants in gardens.
Hooks For Essays Guide - Check Out How To Write ALindsay Alston
1. Ricardo explains comparative advantage as the theory that even nations relatively poor at producing everything have some things they can produce relatively well. Nations should specialize in what they can produce at a lower opportunity cost and trade for the rest.
2. Before trade, Ed's grandchild had eye problems and poor vision that could not be healed without modern medicine.
3. After trade allowed global specialization and cooperation, Ed's grandchild was able to access life-saving medicine developed by Merck and have good vision, now doing homework in front of a large TV and computer.
Introduction - How to write an essay - LibGuides at University of .... How to Improve Your Academic Writing with the Right Essay Structure?. Guide to Essay Writing Harris University. How to Structure an Essay: A Guide for College Students. 15 Essay Format Templates - PDF. A Detailed Guide on How to Write the Best Essay Urgent Homework Blog. Essay Structure: The Proper Way to Set Up Paragraphs for Your Essay .... History Essay: Structure of essay. College Essay Format: Simple Steps to Be Followed. How To Write a Thesis Statement: Step-By-Step Part 1 Essay Writing. A Comprehensive Essay Structure Guide: Tips and Formats. How to Write a Personal Essay Guide by EssayHub Writers. 32 College Essay Format Templates amp; Examples - TemplateArchive. Structure for essay writing - The Writing Center.. the structure of an outline for a research paper, including text and .... Quick Way To Write Essay - Anna Blog. Structure of essay - презентация онлайн. Writing a Descriptive Essay The Structure of a Descriptive Essay .... Analytical Essay Introduction Structure Telegraph. History Essay: Structure of an essay example. What Is The Structure That An Essay Should Have? - Sweet Captcha. Paragraph Structure in Research Paper Meaning, Importance, and Use. Basic Essay Structure. How to Write a Great Essay Quickly! ESL Buzz. College Essay Examples - 9 in PDF Examples. Pin by Kat Compton on writing an essay Essay writing skills, Essay .... Paragraph Analysis - Academic English UK. Sample Essay. Pin on ESOL ADVANCEd. Argument Essay Structure Essay writing skills, Teaching writing .... High School Essay Writing Sample on Topics and Structure. essay structure Charts. Essay Structure - Tips to Format Essay With Examples GoAssignmentHelp .... A scheme which illustrates structure of every essay English grammar .... Structuring Your Essay: Academic Writing Part III Princeton ... Structure For Essay Writing Structure For Essay Writing
An NGO is working to expand pit latrines in Uganda and encourage related sanitation businesses. However, some pits fill much more quickly than others, which is an issue for emptying. The NGO wants to understand why pit filling rates vary and develop an affordable monitoring device that can collect data on pit usage over time to provide insights. An ideal first prototype would cost $50-200 and monitor 50-5 pits respectively to collect basic usage data without electricity or skilled labor. Testing will use simulated waste materials and initial prototypes are aimed for February field testing.
1) The document describes a student, Emilie Kundycki, and her senior project which was originally going to be organizing a fundraising walk for an animal shelter, but ended up being changed to creating a guide about saltwater aquariums.
2) Issues with coordinating the fundraising walk led to a change in project, and drawing on her experience working at an aquatics store, Emilie decided to create a guide about saltwater aquariums instead.
3) The guide covers equipment, setup, water parameters, fish care, profiles over 100 fish species, and resources for further learning. Though not pursuing marine biology, Emilie found creating the guide a valuable learning experience.
How does the color of the light affect the growth of a plantbri_lives_the_life99
The student conducted an experiment to determine how the color of light affects plant growth. Two identical plants were placed under different light sources - one under a blue light bulb and one under a natural light bulb. Over several weeks, the student observed and recorded data on the plants' growth. Their results showed that the plant under the natural light grew healthier and stronger, developing leaves, flowers, and a greater height, while the plant under blue light struggled, failing to flower and growing much smaller with weak branches. The student concluded that natural light allows for optimal plant growth compared to artificial blue light.
Ducks, Semi Trucks, Upscale Doctors? Offices and Your DestinyEmployment Crossing
The document discusses how different environments and careers suit different natural inclinations and skills. It notes that ducks are happiest swimming as that is their nature, while semi-trucks are meant to pull trailers. Some people pursue careers like medicine despite disliking science, and many lawyers and doctors secretly want to start businesses instead. The key is finding work that aligns with one's natural talents and interests for maximum happiness and success.
1) Dr. José Cruz Arzón discovered a strange new plant species while doing field work in Puerto Rico in the year 2120.
2) The plant had unusual red coloring and thick stem and leaves composed of cartilage instead of hard bone. It also had the ability to move itself.
3) Through laboratory analysis and further observation, Dr. Arzón determined the plant had evolved the ability to move to escape pollution and capture more carbon dioxide through specialized tissues.
4) He named the plant "Sperare mundis," meaning "hope of the world," as a message that nature is adapting to the damage humans have caused, and there is still time to fix the environment.
The document is a report from an intern at GaiaYoga Gardens sustainability internship in Hawaii. It summarizes the intern's experience at their previous internship at Green Architectural Design, which did not meet their expectations. They then found GaiaYoga Gardens, where they are learning sustainable living skills like permaculture, solar energy systems, and off-grid infrastructure while helping with projects around the property. The intern is gaining technical, creative, and professional skills and plans to continue working on various sustainability projects during the remainder of their internship.
Travis Wallage created a backyard aquaponics system for his senior project. Aquaponics is a self-sustaining system that produces both vegetables and protein. Through his research, Travis learned aquaponics can be used commercially or in urban areas. He built a backyard system that demonstrated the importance of balance between plants and fish. Travis hopes to join the Marines and believes aquaponics is a skill that could help him survive. He enjoyed planning, building, and maintaining the system and harvesting vegetables from it.
C:\documents and settings\alexis g\my documents\howajgianna
The document discusses a student's project at an animal sanctuary and how it relates to their major and interests in animal law, as well as their understanding of sense of place and sustainability. The student volunteers at a local sanctuary that uses natural enclosures and sustainable practices for the animals. Through spending time outdoors with the animals, the student gained an understanding of the animals' sense of place and trusting relationships with them. The project also connected well with the student's colloquium readings and discussions about becoming one with the natural world, providing hands-on, life-changing experience compared to classroom learning alone.
Stefan's Journey of Inventions (Linkedin) 1AStefan Chew
Stefan fell in love with inventing after his mother struggled with mobility issues like bathing. He researched bathing devices but found few options that helped the elderly or disabled bathe safely. Over many years, through trial and error, he invented several portable bathtub models of varying sizes, prices, and luxury levels to make bathing safer and easier for those with limited mobility. In total he has over 12 unrelated inventions, though his passion remains helping the elderly and disabled through innovative accessibility and safety devices.
How To Head A College Application Essay. Online assignment writing service.Kristi Anderson
The document discusses two Shakespeare plays, The Merchant of Venice and Twelfth Night. In both plays, a woman disguises herself as a man to accomplish a goal. Specifically, Portia disguises as a lawyer to help Antonio, while Viola disguises as Cesario to work for Duke Orsino. However, Portia seems more confident in her male role compared to the reluctant Viola.
The document provides an update on the progress of creating an interactive herbarium of native plant species in Sandy Hook, New Jersey. It discusses designing a webpage to make the herbarium accessible to the public, as well as researching information on the plant species. Alternative solutions for the herbarium website are considered.
What are the Skills You Need as a Marijuana Grower?Evergreen Buzz
What are the skills you need as a cannabis grower, read this https://cannabis.net/blog/opinion/what-is-the-most-crucial-skill-to-look-for-in-a-master-cannabis-grower
The document provides guidelines for a final case analysis assignment on the 2006 SEC charges against Waste Management, requiring students to research the charges and answer a set of questions. It directs students to review SEC documents and Waste Management financial reports and use analytical worksheets to complete a 5-8 page analysis. Instructors will provide feedback and grade submissions based on inclusion of main elements, examples used, and adherence to requirements.
The passage discusses the portrayal of Native American women in popular culture and media over time. Pocahontas was depicted as the "sweetest of savages" and idealized as conforming to Christianity, setting a standard for Native American women. Later portrayals emphasized assimilating Native American women and children over men through depictions of lighter skin and more Americanized appearances. Companies also exploited Native American imagery in early 20th century advertisements to appeal to colonial ideals. Overall, the portrayal of Native Americans has historically fallen into extremes without accurately representing their cultures.
Composting with Worms ~ Chittenden Solid Wastex3G9
Worm composting is an effective way to recycle food scraps into nutrient-rich compost. Keeping a classroom worm bin provides hands-on learning for students about decomposition, the environment, and caring for living creatures. Worms eat food scraps and bedding, producing castings that make excellent plant fertilizer. Students observe the worms, collect data, and learn how to properly care for and harvest from the bin. The bin also supports cross-curricular lessons in science, math, language arts, and more.
Rebecca Nelson and John Pade created the Aquaponics Journal 10 years ago and have provided a valuable service by advancing the aquaponics industry through their publication. To celebrate their achievement, the author compiled 10 important guidelines for aquaponic systems, including using a feeding rate ratio for design calculations, keeping feed input relatively constant, supplementing with calcium, potassium and iron, ensuring good aeration, removing solids, being careful with aggregates, oversizing pipes, using biological pest control, ensuring adequate biofiltration, and controlling pH.
This document provides instructions for constructing an automatic bell siphon for use in backyard aquaponic systems. A bell siphon uses gravity and water pressure to drain water from the grow bed and return it to the fish tank on a regular cycle without using electricity. The key components of a bell siphon are a standpipe, drainpipe, bell-shaped pipe with notches on the bottom, and snorkel tube. Instructions are given for sizing components based on grow bed size, installing fittings, cutting the bell shape and notches, adding the snorkel tube, and constructing a gravel guard. Proper construction and sizing of the bell siphon allows it to automatically drain and refill the grow bed on a regular
This document discusses the importance of water chemistry in aquaponic systems. It explains that the three main biological components of aquaponic systems - fish, plants, and bacteria - are all dependent on the water being in suitable chemical conditions for their health and survival. Fish rely on water flowing over their gills to breathe and expel waste, while plants uptake nutrients and bacteria perform critical chemical processes, so all three are impacted by factors like pH, oxygen, nitrates, and other water chemistry parameters. The document emphasizes that understanding and managing water chemistry is essential for optimizing aquaponic system function and production.
Ewh nepal package apr 2014 to sep 2014Tushar Singh
- Nepal is a landlocked country located between China and India known for its natural beauty and cultural heritage. It contains eight of the world's highest peaks, including Mount Everest.
- Kathmandu is the capital city located in the Kathmandu Valley and is a cultural hub known for its historic monuments, temples, and architecture. Popular day trips from Kathmandu include Patan, Bhaktapur, and Nagarkot.
- Other famous places to visit in Nepal include Pokhara known as the "Switzerland of Nepal" for its natural scenery, and Chitwan National Park home to wildlife like tigers and rhinoceros.
Ewh bhutan package january 2014 to december 2014Tushar Singh
This document provides information about tour packages to Bhutan, including itineraries, costs, and included/excluded items. A 3-5 day short trip visits Thimphu and Paro, seeing landmarks like Tashichho Dzong. A 4 day Bhutan Fantasy adds a trip to Haa Valley. A 4 day Romantic Bhutan option visits Phuentsholing, Thimphu, Paro, and ends in Dooars, India. A 5 day Royal Bhutan tour spends 2 nights each in Thimphu, Punakha, and Paro, passing Dochu La. Packages include accommodation, transport, and breakfast; excluded are entrance fees, drinks, and tips. Rates are provided for luxury
Ewh leh ladakh package 15th april to 15th oct 2013Tushar Singh
This document provides information about the Ladakh region of India. It begins with a brief introduction describing Ladakh as a high altitude mountainous region bounded by the Karakoram and Himalayan ranges. It notes that Ladakh was an independent kingdom for close to a millennium and had a strategic location connecting Central Asia to India. The rest of the document provides more detailed descriptions and facts about specific destinations and attractions in Ladakh, including Leh, Zanskar Valley, Nubra Valley, Buddhist monasteries, Tso Moriri and Pangong lakes. It also includes sample tour package information for visiting Ladakh.
Ewh darjeeling & sikkim april - sept 2014Tushar Singh
This document provides details on 25 different East Himalayan tour packages ranging from 3-10 nights. It includes the package code, number of nights, destinations and included accommodations. Some key packages include:
- EWHNBS 01 Queen of the Hills (3 nights in Darjeeling) including accommodations in Darjeeling, sightseeing tours and transfers.
- EWHNBS 02 Beautiful Trail (3 nights in Gangtok) including city tour, excursion to Tsomgo Lake and accommodations in Gangtok.
- EWHNBS 04 Mystic Mountain (4 nights in Darjeeling and Gangtok) including sightseeing in both cities, accommodations and transfers between destinations
An NGO is working to expand pit latrines in Uganda and encourage related sanitation businesses. However, some pits fill much more quickly than others, which is an issue for emptying. The NGO wants to understand why pit filling rates vary and develop an affordable monitoring device that can collect data on pit usage over time to provide insights. An ideal first prototype would cost $50-200 and monitor 50-5 pits respectively to collect basic usage data without electricity or skilled labor. Testing will use simulated waste materials and initial prototypes are aimed for February field testing.
1) The document describes a student, Emilie Kundycki, and her senior project which was originally going to be organizing a fundraising walk for an animal shelter, but ended up being changed to creating a guide about saltwater aquariums.
2) Issues with coordinating the fundraising walk led to a change in project, and drawing on her experience working at an aquatics store, Emilie decided to create a guide about saltwater aquariums instead.
3) The guide covers equipment, setup, water parameters, fish care, profiles over 100 fish species, and resources for further learning. Though not pursuing marine biology, Emilie found creating the guide a valuable learning experience.
How does the color of the light affect the growth of a plantbri_lives_the_life99
The student conducted an experiment to determine how the color of light affects plant growth. Two identical plants were placed under different light sources - one under a blue light bulb and one under a natural light bulb. Over several weeks, the student observed and recorded data on the plants' growth. Their results showed that the plant under the natural light grew healthier and stronger, developing leaves, flowers, and a greater height, while the plant under blue light struggled, failing to flower and growing much smaller with weak branches. The student concluded that natural light allows for optimal plant growth compared to artificial blue light.
Ducks, Semi Trucks, Upscale Doctors? Offices and Your DestinyEmployment Crossing
The document discusses how different environments and careers suit different natural inclinations and skills. It notes that ducks are happiest swimming as that is their nature, while semi-trucks are meant to pull trailers. Some people pursue careers like medicine despite disliking science, and many lawyers and doctors secretly want to start businesses instead. The key is finding work that aligns with one's natural talents and interests for maximum happiness and success.
1) Dr. José Cruz Arzón discovered a strange new plant species while doing field work in Puerto Rico in the year 2120.
2) The plant had unusual red coloring and thick stem and leaves composed of cartilage instead of hard bone. It also had the ability to move itself.
3) Through laboratory analysis and further observation, Dr. Arzón determined the plant had evolved the ability to move to escape pollution and capture more carbon dioxide through specialized tissues.
4) He named the plant "Sperare mundis," meaning "hope of the world," as a message that nature is adapting to the damage humans have caused, and there is still time to fix the environment.
The document is a report from an intern at GaiaYoga Gardens sustainability internship in Hawaii. It summarizes the intern's experience at their previous internship at Green Architectural Design, which did not meet their expectations. They then found GaiaYoga Gardens, where they are learning sustainable living skills like permaculture, solar energy systems, and off-grid infrastructure while helping with projects around the property. The intern is gaining technical, creative, and professional skills and plans to continue working on various sustainability projects during the remainder of their internship.
Travis Wallage created a backyard aquaponics system for his senior project. Aquaponics is a self-sustaining system that produces both vegetables and protein. Through his research, Travis learned aquaponics can be used commercially or in urban areas. He built a backyard system that demonstrated the importance of balance between plants and fish. Travis hopes to join the Marines and believes aquaponics is a skill that could help him survive. He enjoyed planning, building, and maintaining the system and harvesting vegetables from it.
C:\documents and settings\alexis g\my documents\howajgianna
The document discusses a student's project at an animal sanctuary and how it relates to their major and interests in animal law, as well as their understanding of sense of place and sustainability. The student volunteers at a local sanctuary that uses natural enclosures and sustainable practices for the animals. Through spending time outdoors with the animals, the student gained an understanding of the animals' sense of place and trusting relationships with them. The project also connected well with the student's colloquium readings and discussions about becoming one with the natural world, providing hands-on, life-changing experience compared to classroom learning alone.
Stefan's Journey of Inventions (Linkedin) 1AStefan Chew
Stefan fell in love with inventing after his mother struggled with mobility issues like bathing. He researched bathing devices but found few options that helped the elderly or disabled bathe safely. Over many years, through trial and error, he invented several portable bathtub models of varying sizes, prices, and luxury levels to make bathing safer and easier for those with limited mobility. In total he has over 12 unrelated inventions, though his passion remains helping the elderly and disabled through innovative accessibility and safety devices.
How To Head A College Application Essay. Online assignment writing service.Kristi Anderson
The document discusses two Shakespeare plays, The Merchant of Venice and Twelfth Night. In both plays, a woman disguises herself as a man to accomplish a goal. Specifically, Portia disguises as a lawyer to help Antonio, while Viola disguises as Cesario to work for Duke Orsino. However, Portia seems more confident in her male role compared to the reluctant Viola.
The document provides an update on the progress of creating an interactive herbarium of native plant species in Sandy Hook, New Jersey. It discusses designing a webpage to make the herbarium accessible to the public, as well as researching information on the plant species. Alternative solutions for the herbarium website are considered.
What are the Skills You Need as a Marijuana Grower?Evergreen Buzz
What are the skills you need as a cannabis grower, read this https://cannabis.net/blog/opinion/what-is-the-most-crucial-skill-to-look-for-in-a-master-cannabis-grower
The document provides guidelines for a final case analysis assignment on the 2006 SEC charges against Waste Management, requiring students to research the charges and answer a set of questions. It directs students to review SEC documents and Waste Management financial reports and use analytical worksheets to complete a 5-8 page analysis. Instructors will provide feedback and grade submissions based on inclusion of main elements, examples used, and adherence to requirements.
The passage discusses the portrayal of Native American women in popular culture and media over time. Pocahontas was depicted as the "sweetest of savages" and idealized as conforming to Christianity, setting a standard for Native American women. Later portrayals emphasized assimilating Native American women and children over men through depictions of lighter skin and more Americanized appearances. Companies also exploited Native American imagery in early 20th century advertisements to appeal to colonial ideals. Overall, the portrayal of Native Americans has historically fallen into extremes without accurately representing their cultures.
Composting with Worms ~ Chittenden Solid Wastex3G9
Worm composting is an effective way to recycle food scraps into nutrient-rich compost. Keeping a classroom worm bin provides hands-on learning for students about decomposition, the environment, and caring for living creatures. Worms eat food scraps and bedding, producing castings that make excellent plant fertilizer. Students observe the worms, collect data, and learn how to properly care for and harvest from the bin. The bin also supports cross-curricular lessons in science, math, language arts, and more.
Rebecca Nelson and John Pade created the Aquaponics Journal 10 years ago and have provided a valuable service by advancing the aquaponics industry through their publication. To celebrate their achievement, the author compiled 10 important guidelines for aquaponic systems, including using a feeding rate ratio for design calculations, keeping feed input relatively constant, supplementing with calcium, potassium and iron, ensuring good aeration, removing solids, being careful with aggregates, oversizing pipes, using biological pest control, ensuring adequate biofiltration, and controlling pH.
This document provides instructions for constructing an automatic bell siphon for use in backyard aquaponic systems. A bell siphon uses gravity and water pressure to drain water from the grow bed and return it to the fish tank on a regular cycle without using electricity. The key components of a bell siphon are a standpipe, drainpipe, bell-shaped pipe with notches on the bottom, and snorkel tube. Instructions are given for sizing components based on grow bed size, installing fittings, cutting the bell shape and notches, adding the snorkel tube, and constructing a gravel guard. Proper construction and sizing of the bell siphon allows it to automatically drain and refill the grow bed on a regular
This document discusses the importance of water chemistry in aquaponic systems. It explains that the three main biological components of aquaponic systems - fish, plants, and bacteria - are all dependent on the water being in suitable chemical conditions for their health and survival. Fish rely on water flowing over their gills to breathe and expel waste, while plants uptake nutrients and bacteria perform critical chemical processes, so all three are impacted by factors like pH, oxygen, nitrates, and other water chemistry parameters. The document emphasizes that understanding and managing water chemistry is essential for optimizing aquaponic system function and production.
Ewh nepal package apr 2014 to sep 2014Tushar Singh
- Nepal is a landlocked country located between China and India known for its natural beauty and cultural heritage. It contains eight of the world's highest peaks, including Mount Everest.
- Kathmandu is the capital city located in the Kathmandu Valley and is a cultural hub known for its historic monuments, temples, and architecture. Popular day trips from Kathmandu include Patan, Bhaktapur, and Nagarkot.
- Other famous places to visit in Nepal include Pokhara known as the "Switzerland of Nepal" for its natural scenery, and Chitwan National Park home to wildlife like tigers and rhinoceros.
Ewh bhutan package january 2014 to december 2014Tushar Singh
This document provides information about tour packages to Bhutan, including itineraries, costs, and included/excluded items. A 3-5 day short trip visits Thimphu and Paro, seeing landmarks like Tashichho Dzong. A 4 day Bhutan Fantasy adds a trip to Haa Valley. A 4 day Romantic Bhutan option visits Phuentsholing, Thimphu, Paro, and ends in Dooars, India. A 5 day Royal Bhutan tour spends 2 nights each in Thimphu, Punakha, and Paro, passing Dochu La. Packages include accommodation, transport, and breakfast; excluded are entrance fees, drinks, and tips. Rates are provided for luxury
Ewh leh ladakh package 15th april to 15th oct 2013Tushar Singh
This document provides information about the Ladakh region of India. It begins with a brief introduction describing Ladakh as a high altitude mountainous region bounded by the Karakoram and Himalayan ranges. It notes that Ladakh was an independent kingdom for close to a millennium and had a strategic location connecting Central Asia to India. The rest of the document provides more detailed descriptions and facts about specific destinations and attractions in Ladakh, including Leh, Zanskar Valley, Nubra Valley, Buddhist monasteries, Tso Moriri and Pangong lakes. It also includes sample tour package information for visiting Ladakh.
Ewh darjeeling & sikkim april - sept 2014Tushar Singh
This document provides details on 25 different East Himalayan tour packages ranging from 3-10 nights. It includes the package code, number of nights, destinations and included accommodations. Some key packages include:
- EWHNBS 01 Queen of the Hills (3 nights in Darjeeling) including accommodations in Darjeeling, sightseeing tours and transfers.
- EWHNBS 02 Beautiful Trail (3 nights in Gangtok) including city tour, excursion to Tsomgo Lake and accommodations in Gangtok.
- EWHNBS 04 Mystic Mountain (4 nights in Darjeeling and Gangtok) including sightseeing in both cities, accommodations and transfers between destinations
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
The document summarizes a school trip taken by 25 students and 3 teachers from The International School Bangalore to trek in the Himalayas near Manali, Himachal Pradesh from April 13-20, 2013. The group took a bus from Delhi to the base camp in Manali, then went on day hikes exploring local temples, villages, and climbing. Activities included rock climbing, rappelling, an overnight stay in tents at 14,000 feet, playing in the snow, and learning about local culture. The trip aimed to provide adventure, education, and fostering cooperation among the students.
This interim report identifies and assesses tourism circuits in Chandigarh, India. It analyzes the potential and carrying capacity of circuits, assesses existing infrastructure, and identifies priority projects. Key findings include:
1. Chandigarh has potential circuits centered around its gardens, forests, and cultural sites.
2. Stakeholder consultations and carrying capacity analyses were conducted to select and prioritize circuits.
3. Infrastructure assessments found gaps between transport hubs and tourist destinations.
4. The report identifies infrastructure projects, estimates costs, and proposes implementing agencies to develop priority circuits.
This document provides information about an upcoming integrated tourism development conference focused on Northern India that will take place in Chandigarh, India. The conference aims to promote tourism across Northern India states like Jammu and Kashmir, Himachal Pradesh, Haryana, Punjab, Uttarakhand, and the Union Territory of Chandigarh. It will include presentations from state tourism departments and travel trade associations, as well as sessions on integrated tourism planning, marketing, skills development, and resource management. Participants will also have the opportunity to tour Chandigarh and attend a networking dinner.
Temple of Asclepius in Thrace. Excavation resultsKrassimira Luka
The temple and the sanctuary around were dedicated to Asklepios Zmidrenus. This name has been known since 1875 when an inscription dedicated to him was discovered in Rome. The inscription is dated in 227 AD and was left by soldiers originating from the city of Philippopolis (modern Plovdiv).
Walmart Business+ and Spark Good for Nonprofits.pdfTechSoup
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
How to Make a Field Mandatory in Odoo 17Celine George
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
Leveraging Generative AI to Drive Nonprofit InnovationTechSoup
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
How to Setup Warehouse & Location in Odoo 17 InventoryCeline George
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptxEduSkills OECD
Iván Bornacelly, Policy Analyst at the OECD Centre for Skills, OECD, presents at the webinar 'Tackling job market gaps with a skills-first approach' on 12 June 2024
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
2. 2
Conditions of Use Statement
This document, in part or in its entirety, may be copied, reproduced or adapted to
meet local needs
without permission from the author or publishers, provided credit is given to
Travis W. Hughey.
These provisions apply only provided the parts reproduced are distributed free or
at cost – not for profit.
Travis W. Hughey would appreciate being sent a copy of any materials in which
text or illustrations have been adapted.
For reproduction on commercial basis, permission must be first
obtained from Travis W. Hughey.
Any commercial or for sale application of the Flood Valve technology is strictly
forbidden without prior approval in writing from Travis W. Hughey.
Travis W. Hughey can be reached at aquaponic70@yahoo.com .
3. 3
Table of Contents
Cover Page………………………………..................................................... 1.
Conditions of Use Statement………………………………........................ 2.
Table of Contents………………………………........................................... 3.
Introduction………………………………..................................................... 4.
How It All Began………………………………............................................. 5.
Let the Danger Begin!……………………………......................................... 6.
Jumpin’ In………………………………........................................................ 7.
“I Don’t Have the Education!”………………………….................................. 7.
The Nitrogen Cycle……………………………….......................................... 7.
What the Plants Need………………………………....................................... 8.
What the Fish Need……………………………….......................................... 9.
Parts List for Aquaponics System………………………………..................10.
Swimin’ with the Fishes……………………………….................................. 13.
Barrel Growbed Construction………………………………........................ 22.
Building the Stand……………………………….......................................... 28.
Building the Floodvalve………………………………................................. 43.
Assemble the Sub-assemblies………………………………......................... 49.
Let’s Put This Thing Together……………………………….......................... 61.
The Floating Raft Tank………………………………................................... 69.
Movin’ the Water………………………………............................................. 75.
Plumbing It All Together………………………………................................ . 76.
Options………………………………............................................................ 80.
Maintenance……………………………….................................................... 87.
Starting the System………………………………........................................ 89.
Why I do What I Do………………………………......................................... 91.
A Little Bit Of What To Look Forward To………………………….............. 92.
4. 4
Introduction
If you are looking for an introduction to aquaponics that is simple to build, fun
to watch and demonstrate to friends and family the joy of soil less gardening.
This small unit may be for you. It is capable of growing various vegetables and
herbs and would be a wonderful addition to the home kitchen as a source of
fresh herbs and occasionally (depending on the species used) a fish or two.
What it most likely won't do is provide the vegetables to sustain someone on it's
own. That is for a much larger system. Fish production is also limited because of
the small size of the unit. The actual production possible is mainly dependant on
the operators ability to manage it. I have personally grown tilapia in this system
to about 1/2 Lb. Not a lot of them, just a few. I have grown tomato plants and
papaya trees in this system with nothing more than 4 each of 1/2Lb. tilapia as
the nutrient source. Remember this is not magic. This systems fish tank at the
lowest point in the cycle will only have a little over 20gal. of water in it. In my
opinion it's simply not practical in the real world to grow high densities of fish and
have a system that is forgiving at the same time. This unit is specifically
designed as an introduction to aquaponics and to make one familiar with the
principals involved with minimal expense. It is very adaptable to situations where
conventional electric pumps may not be practical. This is all about learning fun
and not intended to be a commercial unit in itself although I believe the principles
can be enlarged to do so. Please read this material in it's completion before
attempting to build this unit. If you are unfamiliar with something don't worry
about it too much. It will come clear as the project progresses. Before we get
into the system please allow me to give a little information about myself.
5. 5
How it all Began
I first became interested in aquaponics after acquiring a greenhouse in the
spring of 2002 from a local middle school here in coastal South Carolina. The
school system here was converting to a "Technical curriculum" and no longer
needed the mainstay piece of equipment of their horticulture class. A donation
to the PTA and a few weekends of hard work by my family and the green house
was on our property. Now what to do with it? It was a 28 x 45 hoop style
greenhouse with cooler, fans, and all the standard equipment.
I then started researching what to do. The first thing I considered was
hydroponics but decided it wasn't for me after visiting a hydroponic tomato
operation and found out there was a hazardous waste byproduct that had to be
hauled off periodically. I'm not saying hydroponics is a bad thing at all. I'm just
saying it wasn't for me at the time. I wanted to do something unique and during
a web search ran across the term "aquaponics". This intrigued me as I was a
biology major at Oral Roberts University but never got to finish my education
there. This was a natural fit, aquaculture and horticulture in a soiless medium.
The search led me to Tom and Paula Spraneo. They were selling a manual on
aquaponics so I ordered it. To say it opened my eyes was an understatement to
say the least. Their manual is very informative and I highly recommend it if it is
still available. Tom and Paula have done a great service to have helped in the
pioneering of this great technology. I must say I was a little intimidated at first
but became more and more comfortable with the information the more I studied
it. Our quest then led us to an opportunity to attend an aquaculture workshop in
2003 that included aquaponics as one of the topics. The workshop was hosted
by Charlie Johnson of Aquaculture International in Bryson City, NC. It was a
very informative time with a lot of contacts I still have today. There were a lot of
mission minded types there and they as well as I saw the importance of this
technology in feeding the poor.
There was one person there that really grabbed my attention. His name is
Frank NcNeely and he is the owner of Aqua-Terra Gardens in Springfield, MO.
He was doing aquaponics in old recycled fiberglass bathtubs salvaged from a
hotel renovation. That inspired me and got me to thinking. I had been putting
together a mold to make my growbeds out of fiberglass. Why not use an
abundance of plastic barrels I had laying around. By the time my wife (Lori) and
I returned home I had the basic idea on how to use these barrels as growbeds. I
couldn't wait, but had to, as my job did not afford much time to pursue my
newfound passion. I definitely had enough information to be dangerous now.
6. 6
Let the Danger Begin!!
Beginning in September of 2003 I started putting together a S&S based
system in concept but using low cost materials. That's the beauty of aquaponics,
you are only limited by your imagination. The system was started in early
October of 2003 and I made all the mistakes everyone talks about. Most
mistakes are made early on from mere impatience. Trying to push the system
too hard in the beginning is a sure formula for disaster. It is no fun carrying out
buckets full of dead fish and frantically trying to find out why they are dying.
Every person new to aquaculture has the potential to be a serial fish killer. I was
no exception. Once the system stabilizes though it is amazingly resilient. My
experience with this system has taught me many things and I look forward
learning much more in the future.
After working with this system it became apparent to me that this technology
would be a Godsend to areas of the world where there is no soil or it is very
poor. Many cultures in the world suffer from malnutrition and I believe
aquaponics may be one of the solutions to the problem. One of the problems is
that aquaponics is somewhat technical and may not be appropriate in it's current
form. This is what got me to thinking about a small system that could be built in
orphanages and teach the principals of aquaponics in such a way it could be
easily understood and become commonplace. For this to happen the technology
has to be reliable and in-expensive. I started working on the idea for a small
barrel based system. This system had to be simple, visual and reliable. I started
working on a variation of a system that Frank NcNeely used as a training tool. It
involved using a toilet float attached directly to the flapper of a standard flush
valve. The problem I found was under very low flow situations the flapper would
lift just enough to allow the water to flow but wouldn't dump the tank as needed.
It was about 9:00 in the evening in March of 2004 and I was coming up against a
wall. Frustrated and feet soaking wet from playing with water for hours I just
stopped and prayed. I knew the Creator of the universe had the answer to the
problem as simple as this, I just needed to clear my frustration and listen to Him.
By 11:00 that night I had the initial prototype working on even the slightest trickle.
A few refinements to the initial concept and the first system was put together
using the barrel half growbeds. That system is still in operation today. Working
day and night with the slightest maintenance required. The flood valve is fully
adjustable as to flood volume and cycle time parameters and uses no timers or
float switches for it to operate. It is very inexpensive to build and is just plain fun
to watch operate. It is very visual and definitely captures the attention of passers
by. Well, let's get started with the system.
7. 7
Jumpin' In
"I Don't Have the Education !"
First let me explain that you do not have to have a college degree to be
successful with aquaponics on the home level. Just like you do not have to
understand the chemical process that goes on during combustion in the engine
of your car to successfully operate it you do not need to fully understand the
complexities of the biochemistry involved in aquaponics. You do need to know a
few things though just as you do to operate your car. If you get the chance to
attend an aquaponics course or seminar I highly recommend it. If not there is
always the school of hard knocks. Just be sure you start small. That's what this
manual is all about. The first basic of aquaponic is the nitrogen cycle. It is how
toxic ammonia fish waste is ultimately converted to not as toxic nitrates. The
following is information provided from Nelson/Pade Multimedia. Thanks
Rebecca!!
The Nitrogen Cycle
Reprinted with permission from Nelson/Pade Multimedia, publishers of the
Aquaponics Journal, www.aquaponics.com
More than 50% of the waste produced by fish is in the form of ammonia,
secreted through the gills and in the urine. The remainder of the waste is
excreted as fecal matter, undergoes a process called mineralization which
occurs when Heterotrophic bacteria consumes fish waste, decaying plant matter
and uneaten food, converting all three to ammonia and other compounds. In
sufficient quantities ammonia is toxic to plant and fish. Nitrifying bacteria, which
naturally live in the soil, water and air convert ammonia first to nitrite
(Nitrosomonas bacteria) and then to nitrate (Nitrobacter) which the plants
consume. Nitrifying bacteria will thrive in the gravel beds and in the water in the
system. The plants readily take up the nitrites and nitrates in the water and, in
consuming it, help to keep the water clean and safe for the fish.
8. 8
What the Plants Need
Plants need nutrients in the proper amounts, oxygen, CO2, water and light.
They can come from natural or artificial means. Aquaponics takes advantage of
a natural process in a controlled environment and fulfills these requirements.
Plant roots need oxygen which brings us to the need for a flood and drain
requirement for the growbeds. If plant roots would tolerate continual emersion in
water we would not need to drain the grow beds and could simply flow water
through continuously. There are several different schemes to accomplish this
using timers, float switches or even computer control. The flood valve eliminates
the need for such technology. I'm not saying technology is bad. I use it when
available. It is a good thing. It's just not available everywhere.
I have grown a large variety of vegetables in my system and the only one's I
have had trouble with are squash. They seem to be very sensitive to the
moisture level of the system and almost always have powdery mildew problems.
A partial list of successfully grown vegetables, fruits and herbs in my system
include tomatoes, onions, peppers (sweet and hot from bell to habanero), beans,
beets, brocolli, basil, cilantro, papaya, collards, cucumbers, carrots, lettuce,
stevia, moringa, dill, chard, okra, peas and parsley to name a few. The plants
thrive in this environment and the planting densities are much higher than in a
conventional garden.
9. 9
What the Fish Need
Fish need clean oxygen rich water and reliable feed to thrive. The water also
needs to be at the right temperature. Conditions that are tolerable vary from
species to species. One would have to get information elsewhere concerning
the specific species desired. All you need is an aquatic animal with gills to
provide the basic nutrients for the nitrogen cycle to operate and the bacteria to
make the conversion for the plants to take up the nutrients. It is a natural
process that simply has to have the right conditions to occur.
The bacteria and plants in my system keep the water crystal clear and the
water has the sweet smell of healthy creek water. This is one of the basic
indicators I use to check the overall health of the system. If it get's out of
balance you will know it. When things die they smell bad. Whether it's fish or
microbes. The most common cause of problems in a stabilized system is over
feeding. The water gets cloudy and the first reaction is to get nervous about the
change. I just back off the feed for a day or two. The fish will be fine unless
there is a toxin causing the problem. At which point they will probably be lost
anyway. The key to all this is to familiarize oneself with the day to day operation
and nuances. It will become intuitive after a while. Have fun with this and don't
worry too much.
As far as feed goes it all depends on the fish you are using. I have tilapia in my
system. Tilapia are a wonderful choice in tropical climates as they are extremely
forgiving as far as water quality is concerned and they are not picky eaters. They
are vegetarians and will consume leafy scraps from the garden as well as water
hyacinth, water lettuce and duckweed. I have even had them gobble up dried
rabbit pellets just as if it were fish feed. They do very well on standard floating
fish feed and I have even heard of people feeding them dog food when the fish
pellets are not available. Don't forget about the natural feeds available in your
area. There are large amounts of protein flying about in the form of insects and
would be attracted by a light suspended over the fish tank at night. Not to
mention worms, grubs, maggots, etc...
10. 10
Parts List For Aquaponics System
First let me state that this list is for parts commonly found in the United
States. Please don't be put off by the detail of the list. If these things are
common to your area or village fine, if not, be creative, this is a guide to how I
have done it in the states. By all means please don't be discouraged. I am
presently working on ways to accomplish the same thing with different materials
that would be appropriate in different parts of the world. I will make that info
available as the development and testing is done. I don't want to steer you
wrong!! Now here are the parts you need
PVC parts:
a. 1 ft. 1/4" pex pipe
b. 3 each of 1-3/4" long 1/2" pipe
c. 1 each 3" long 1/2" pipe
d. 4 each 4" long 1/2" pipe
e. 1 each 6" long 1/2" pipe
f. 2 each 10" long 1/2" pipe
g. 2 each 12" long 1/2" pipe
h. 1 each 3" long 3/4" pipe
i. 1 each 4" long 3/4" pipe
j. 1 each 6" long sch 40 1" pipe
k. 1 each 19" long 1" thin wall pipe
l. 2 each 8 1/2" long 1" thin wall pipe
m. 8 each 1/2" ell (Lowes #26054, 10 pk.)
n. 6 each 1/2" male adapter (Lowes # 23855)
o. 2 each 3/4" male adapter (Lowes # 23856)
p. 1 flush valve (Lowes # 24452)
q. 1 each 2" female adapter (Lowes # 23906)
r. 1 each 2"x1" sch 40 bushing (Lowes # 22909)
s. 1 each 1 " street ell (Lowes # 1636)
t. 1 each 1" tee (Lowes # 23876)
u. 2 each 1"x3/4" ell (Lowes # 42980)
v. 1 each 1/2" IPT to 1/2" 90deg. barb (Lowes # 54092)
w.2 each 1/2" IPT to 1/2" barb (Lowes # 53802)
x. 1 each 3/4" threaded ball valve (Lowes # 21482)
y. 1 each 3/4" street ell PXM (Lowes # 22699)
z. 34” of 4" corrugated slittted sewer pipe (The type used in septic systems.
Not the type with holes).
aa. AR 1/2" black poly pipe (type used in irrigation)
bb. 3" of 3/8" vinyl tubing
Misc. fittings needed to couple pump to unit dependent on pump used.
11. 11
Hardware is as follows:
cc. 6 each 1/2"conduit locknuts (Lowes # 75443)
dd. 2 each 3/4" conduit locknuts (Lowes # 75450)
ee. 1 each 3/8"x 1/2" FIP coupler with insert (Lowes #27258)
ff. 1 pkg. screen door tension rollers (Lowes # 46757)
gg. 1 each 24" steel fishing leader (Walmart fishing section)
hh. 2 each #10 SS pan head sheet metal screws
ii. 2 each #8 SS pan head sheet metal screws
jj. 1 each #10 SS flat washer
kk. 1 each 1/4" split shot (preferably brass)
ll. AR 3/8" SS flat washers
mm. 1 each 1 liter water bottle ("Clear American" brand flavored water from
Walmart)
nn. 1 small tube of aquarium silicone
oo. 1" by 2 1/2" by 4" long wood block
pp. 1" by 1" by 7" long wood
qq. AR 1/2" foam sheet (blue type used for insulation)
rr. AR 2" net pots (available from Aquatic Eco-systems)
ss. 2 each 1-5/8”deck screws
Framework materials for 55 gal. system are as follows:
4 each 10' 2x4's
3 each 8' 2x4's
1 each 12' 2x6's
1 each 12' 2x8's
8 each 8" cinder blocks
AR 3" deck screws
Pump specs:
Pump for system should be capable of a bare minimum of 100 gal./hr @ 5ft.
head
Gravel
Growbeds will require 12 each 50lb. bags of pea gravel (600 lbs.) for the 55
gal. system.
12. 12
Barrels
Three barrels will be required for each system and should be barrels used for
food products only. Do not use barrels from questionable sources that have
had unknown substances for the growing of food. It could be hazardous to
your health. Generally speaking, white or blue plastic barrels will be safe to use
once cleaned. I would avoid using black barrels as they are used primarily for
chemical storage. Always make sure what you are using. Never recycle barrels
that have no labels on them indicating what they were used for. There are some
nasty surprises inside some of these. Always err on the cautious side.
I prefer to use blue barrels as they don’t grow algae as much as white ones but
will be using white ones for this manual as it is easier to see the layout lines.
Tools needed:
Safety glasses
Jigsaw with new blade.
1/2" drill
1/2" NPT tap (optional but nice if you have it)
3/4" NPT tap (optional but nice if you have it)
1/8" drill bit
5/32" drill bit
1/4" drill bit
3/4" spade bit
1" spade bit
2-1/2" hole saw
driver bit for deck screws
tape measure
sharpie pen and pencil
framing square
12" channel locks
6" adjustable wrench
13. 13
Swimmin' with the Fishes
Let's get started with the simplest part of the system to build, the fish tank.
No, this is not where the saying "easy as shooting fish in a barrel" came from.
We aren't going to shoot the fish here!! Besides, it would put holes in the wrong
places. Gather the following parts from the parts list:
1-Plastic Barrel
1-3/4" PVC male adapter
1-3" long piece of 3/4" PVC pipe
1-3/4" PVC threaded ball valve
1-3/4" PVCstreet ell
1-3/4" conduit locknut
Please be careful and use safety gear when using power tools. When drilling
plastics, tools can at times grab so please be very careful and hold tools firmly.
Always be aware of where the blades, drill bits and anything that could cause
bodily harm are. The purpose of this is to have fun and not spend your quality
time in the doctor's office. When using a marker to lay out the cuts don't worry
about marks on the barrels. They can be cleaned up with acetone, paint thinner,
hairspray, etc... later.
14. 14
Take the first clean barrel stand it on it's end with the barrel bungs up. If you
look closely you will see a thin mold line running between the barrel bungs.
Find the middle of this line and using a framing square mark a point on the
edge of the barrel 90deg. to the mold line on this mark.
Flip the barrel over and do the same thing with the other end.
15. 15
Now, take a straight edge and make a line on the side from one point to the
other the entire length of the barrel. This is the centerline for your cut-out.
Measuring in from each end 6" draw a line 90 deg. to the centerline as
shown in fig.4 on both sides of the line 6-1/2".
16. 16
Now make a line connecting each of these marks.
If you want to give the project a little more finished look take a small can or
bottle and mark a radius at each of the corners.
17. 17
Cut out the center section being careful to secure the barrel while cutting.
Clean up the edges of the cut with sandpaper or I use a knife blade and scrape
the edges clean.
This is what it looks like with the center section cut out.
18. 18
Stand the barrel on it's end with the bottom up.
Remember the center mark on the mold line? Using a framing square make
a line to the bottom of the tank and mark a point 1-1/2 “ from the edge as
shown.
19. 19
Drill a 1" hole here
Thread in a 3/4” PVC male adapter with silicone on the threads. If you have a
pipe tap it will make threading the fitting in easier although it is by no means
necessary.
20. 20
I prefer to lock the fitting on the inside with a conduit locknut to make the
connection more secure. The threads sticking through to the inside can be used
to secure a filter if desired.
Install the 3” section of 3/4” PVC with the threaded PVC street ell as shown.
21. 21
Install the ball valve and whatever fittings needed to hook up the pump you
are using and the fish tank assembly is complete It should look something like
this.
Give the whole thing a good cleaning inside and out. See how simple this is?
Isn’t aquaponics fun?
Now lets move on up the system and construct the growbeds.
22. 22
Barrel Growbed Construction
To build the a growbeds from a plastic barrel you will need the following:
1- blue or white barrel (never use black barrels in food producing systems as
these most likely have had toxic chemicals in them)
4- 1/2" pvc male adapters.
4-1/2” pvc ells.
4-1/2” pvc pipe pieces 4” long.
2-1/2” pvc pipe pieces 10” long.
2-1/2” pvc pipe pieces 12” long.
2- 1/2" gray pvc female npt x 1/2" male hose barb.
2- 6" to 8" pieces of 1/2" hose to fit over the barb. I use the black pipe used in
underground irrigation systems.
1- section of corrugated sewer. The kind used in septic system drain fields with
the slitted sidewalls. The length needed will be the inside length of your barrel
plus 1/2”. Do not use the type with holes in it!
3” piece of 3/8” I.D. vinyl tubing.
Aquarium grade silicone sealer.
Let's begin the growbed assembly.
Take the barrel to be used for the grow beds and stand it on end with the
bottom up. Find the center of the mold line and using a framing square make a
line perpendicular to the mold line from the center mark as shown.
Be sure to make a mark on each side of the mold line and near the edge.
This will be where the grow bed drains will be installed.
23. 23
Drill a 3/4" hole on each line 1" from each edge as shown.
Now, flip the barrel over so the bungs are facing up and remove the bungs.
Using the mold line as a guide take the jigsaw and cut the barrel in half
lengthwise on the mold line. Clean the ragged edges with coarse sandpaper or
scrape them off with a knife. You should now have two halves as shown.
24. 24
If the barrels you are using have a lip around the top it would be a good idea to
remove this lip with a jigsaw as it will keep the growbeds from laying flat in the
frame.
Next take the drain field pipe and look carefully at it and you will notice a mold
line on either side of it as well.
25. 25
Carefully cut along these lines and set both pieces aside.
Now back to the barrel halves. Locate the holes drilled in the first step and
from the outside thread a 1/2" pvc male adapter into this hole with a little silicone
sealer on the threads (if you have a pipe tap this size you can thread the opening
to make it easier).
26. 26
Install a 1/2" conduit locknut and finish tighten the pvc male adapter.
While holding the adapter with some pliers thread the 1/2" female x 1/2" barb
to the threads protruding through on the inside. You have just made a bulkhead
fitting with a 1/2" female pvc connection on the outside and a 1/2" hose barb on
the inside. It should look like this.
27. 27
Slip the short section of hose onto the barb and ensure the curve of the hose
is turned down.
One half of the drain field pipe will go over this connection and run lengthwise
on the bottom of the barrel half to create a clear water space for the
siphon to draw water from. The end of the tube should contact the bottom of the
grow bed. I have slightly heated and formed these tubes to get a better fit when
necessary.
Thoroughly clean the barrel halves with a good cleaner and then with vinegar
to neutralize the soaps. A final cleaning with bleach water is also advised.
We will determine the location of the overflow bypass fittings after the stand is
built and gravel is in the beds.
28. 28
Building the Stand
Others have made stands for small barrel based systems with lighter
materials but I would not advise such a thing. The weight of this unit can easily
exceed 800lbs. Please don't skimp on the foundation of such a project.
Feel free to use recycled materials of course to save money. Be responsible but
by all means be sure it can easily and safely carry the weight.
To make the stand you will need the following:
6 concrete blocks
1 12' 2x6
1 12' 2x8
4 10' 2x4
3 8’ 2x4
1 lb. 3" deck screws
Screw the 2x6 and the 2x8 together to form a “V” as shown. This is done by
screwing through the 2x8 into the 2x6.
29. 29
Cut into 4 sections 35” long as shown.
Set these aside.
Next screw two (2) 10' 2x4's together to make a 4x4 as shown.
30. 30
Cut this into two pieces 54-3/4" long.
Next position these pieces on the ground roughly 36" apart and set the two of
the "V" pieces on top to form a rectangle as shown.
31. 31
Put one 3" deck screw in each corner as shown and square the whole thing
up by checking diagonals and moving until the diagonals are equal.
When they are equal screw the other four corners with 3" deck screws.
With these pieces securely screwed in place take another "V" piece and place
it in the middle. Find the exact center and screw it in place as shown.
32. 32
Now carefully flip this assembly over.
Mark the center of the cross brace as shown and measure out from there on
each side 8".
33. 33
Screw 2 more 10' 2x4's together to form a 4x4 and cut into two pieces
51-1/2" long to form the longitudinal braces. Keep the excess pieces as they can
be used in another part of the frame.
The longitudinal bracing is to be attached as shown. These should be flush on
one end and stick out past the barrel cradles on the other.
34. 34
Screw these together using 3" deck screws as shown.
Carefully flip the assembly back over.
Now with the remaining 2x4's cut the following:
4 pieces 14" long.
4 pieces 23-1/4" long.
1 piece 16" long
1 piece 19" long.
35. 35
Assemble 2 each of the 14" and 23-1/4" pieces as shown with a 3-1/2" offset
at one end and screw together with 3" screws after making sure all is square.
You can use the excess pieces saved from making the 51-1/2“ 4x4 pieces here.
Use the remaining two 14" and 23-1/4" pieces and assemble another bracket
identical to the one you just did.
Attach these to the longitudinals sticking out using 3" deck screws as shown.
Note: The brackets are mounted flush on the ends of the longitudinals.
36. 36
Now attach the 16" brace to the assembly as shown.
Attach the 19" piece as shown.
37. 37
You have just finished the growbed frame assembly.
It should look like this.
38. 38
Now lay out the concrete blocks in a square 26" wide and 50" long making sure
to set them perfectly level and square. It is very important that this foundation be
set level as the operation of the unit could be compromised if it is not set level.
Once the blocks are set lay the frame assembly on as shown.
39. 39
Set the barrel halves in the cradles as shown
Position the fish tank and wedge it against the front blocks as shown with the
remaining "V" piece.
40. 40
With the drain pipe halves in the bottom covering the suction tubes,
hold down firmly while someone pours cleaned, washed pea gravel on top to
hold the drain pipe halves down.
Finish filling the barrels with clean, washed pea gravel being careful to keep
the tops of the barrel halves even and level. Fill to about 1” below the barrel
bung holes.
Install the 4” long 1/2” pvc pipe pieces, 1/2” ells and 10” long 1/2” pvc pipe into
the male adapters at the bottom of the growbeds pointing up as shown.
41. 41
With a garden hose or some buckets fill the growbeds until the water level
just comes up to the bottom of the barrel bungs and mark the waterline on the
front of the growbeds. Make a mark 1/2” below the water line and drill a 1/2”
hole in each growbed at the location shown.
Install a 1/2” male pvc adapter into this hole with a 1/2” conduit locknut on the
inside on each growbed. Insert a 4” long piece of 1/2” pvc pipe into the male
adapter and install a 1/2” ell onto the pvc pipe and install a 12” piece of pvc pipe
into each ell making a downspout for the growbed overflow protection. These
should hang down into the fish tank as shown. Should any growbed siphon
tubes get plugged the water will simply flow to the fish tank instead of on the
floor.
42. 42
The 10”long tubes can be cut short at this time if you wish. They should be
left at least 6” long as they are the lowest part of the siphon for the growbeds.
Cut the 3” section of 3/8” vinyl tubing in half and insert one piece into each of the
growbed downspouts to restrict the outflow of the growbeds. This helps the
water from the flood tank stay in the growbeds for a little longer than with the
pipes alone. It gives the plants and bacteria in the system more of a chance to
utilize the nutrients before returning to the fish tank.
43. 43
Building the Floodvalve
This unit is the very heart of the water management aspect of the system. It
makes the flood and drain aspect of an aquaponics system totally adjustable
without the use of float switches, timers, microprocessors etc....
The theory behind its function is simple. A small adjustable self starting
siphon fills a counterweight that pulls open a standard toilet flush valve. Water
from the flood tank begins to flood the growbeds. The counterweight has a small
drain hole in it that allows it to drain at a slower rate than it is being filled. Once
the flood tank has emptied sufficiently to break the small siphon the
counterweight begins to empty. Once the weight is light enough the toilet valve
closes and the cycle starts over again. Think of it as an invisible man flushing
the toilet every so often depending on the flow rate of the pump and valve
assembly you are using. It's really simple in concept and just plain fun to watch.
This is the most complicated part of the system to build so please read this
section entirely until you are familiar with it.
To begin it's construction you will need the following from the parts list:
1 each 55 gal. plastic barrel
1 ft. 1/4" pex pipe
1 flush valve
1 each 1/2" pvc male adapter
3 each 1/2" pvc ell
2 each of 1-3/4" long 1/2" pvc pipe
1 each 3" long 1/2" pvc pipe
1 each 6" long 1/2" pvc pipe
1 each 3/4" pvc male adapter
1 each 4" long 3/4" pvc pipe
1 each 2" pvc female adapter
1 each 2"x1" pvc sch 40 bushing
1 each 1 " pvc street ell
1 each 1" pvc tee
2 each 1"x3/4" pvc ell
1 each 6" long pvc sch 40 1" pipe
1 each 19" long 1" pvc thin wall pipe
2 each 8 1/2" long 1" pvc thin wall pipe
1 each 1/2"conduit locknuts
1 each 3/4" conduit locknuts
1 each 3/8"x 1/2" FIP coupler with insert
1 pkg. screen door tension rollers
1 each 24" steel fishing leader
10 each #10 x 3/4" SS pan head sheet metal screws
2 each #8 x 1/2" SS pan head sheet metal screws
1 each #10 SS flat washer
1 each 1/4" split shot (preferably brass)
44. 44
AR 3/8" SS flat washers
1 each 1 liter water bottle ("Clear American" brand flavored water from Walmart)
1" by 2 1/2" by 4" long wood block
1" by 1" by 7" long wood block
AR 1/2" foam sheet (blue type used for insulation)
AR 2" net pots (available from Aquatic Eco-systems)
1 small tube of aquarium silicone
Begin construction by turning the barrel with the bottom up. Using the mold
line as a guide once again find the center and using a framing square make a
line perpendicular to the center line from the mold line to the edge as shown.
Make sure the line extends to the side of the barrel for future reference.
Measure back from the edge 4" and make a mark on the line.
45. 45
From this line using the framing square draw a perpendicular line 2" long from
the 4" mark you just made.
Make a mark on this line 1-1/2" from the first line you marked. This is the
location of the 2-1/2" hole for the toilet valve.
46. 46
Using a 2-1/2" hole saw bore a hole centered on this mark. Use extreme
caution as hole saws can grab while cutting plastics. Be sure you have
secure footing and control over your power tools during this operation!!!
PLEASE BE CAREFUL!!!
Flip the barrel over and set on a flat surface like a table. Using a framing
square sitting on the table make a line up the barrel 18" from the first line drawn
as shown.
47. 47
From the top of this line draw a line parallel to this one 1" to the right and
down 6" (you can use the 1" x 1" x 7" wood block as a guide).
On this line make two marks, the first 16-1/2" from the bottom and the second
14-1/2" from the bottom. Drill 1/8" holes on these marks.
48. 48
From the first vertical line make a mark at 9-3/4" from the bottom as shown
and drill a 3/4" hole here.
Mark a line around the barrel 17-1/2" from the bottom all around the barrel as
shown. This is the cut line for the flood tank. It will intersect the two vertical lines
previously drawn.
49. 49
Using a jigsaw cut the flood tank from the barrel. It should look like this.
This would be a good time to give the tank and the leftover portion of the
barrel a good cleaning.
Assemble the sub-assemblies
There are a few sub assemblies in this unit that will help the final assembly if
done now.
The toilet valve needs an extension to the overflow tube. Take the toilet valve
and the 6" long piece of schedule 40 pvc pipe. Slip the pipe over the top of the
overflow tube on the toilet valve until you get an overall length of 14" as shown.
This is a very snug fit.
50. 50
Using the 2" female pvc adapter, 2" x1" pvc bushing, 1" pvc street ell and
assemble as shown being sure to glue these joints together. This is the toilet
valve to manifold adapter.
To assemble the manifold take the 19" long pvc piece of 1" thin wall pipe, 1"
pvc tee, (2) 8-1/2" long 1" thin wall pvc pipe pieces, (2) 1"x3/4" pvc reducing ells
and assemble as shown. These is a slip fit assembly and not to be glued.
51. 51
Next, using (3) 1/2" pvc ells, (2) 1-3/4" 1/2" pipe pieces, (1) 3" piece of 1/2"
pipe and (1) 6" long piece of 1/2" pvc pipe assemble the adjustable siphon
assembly as shown. These are slip fit and not glued.
Here is a view with the pieces assembled.
52. 52
To form the siphon tube downspout you will need the 1/4" pex pipe, a length
of #10 stranded wire and a heat source (blow drier, heat gun or torch). It would
be a good idea to get some gloves or pot holders for this operation as you will be
working with heated plastic. It would also be a good idea to have a section of 1"
pipe around (the manifold assembly would work for this). Slip the #10 wire into
the pex pipe being sure to leave a inch or two extending out of the pex pipe as
shown. The purpose for the #10 wire is to maintain an inside diameter while the
soft heated pex is being bent to a 90 deg. angle.
Gently heat a section 2” wide, back 1" from the end of the pipe until it is very
soft and flexible. Form a 90 deg. bend around a piece of pipe and hold flat and
in place until cool.
You could have someone run water over it while you hold it to speed up the
cooling. Be careful using water if electrical appliances are anywhere near.
Make sure any source of electricity is removed if water is being used.
Once again, this is supposed to be fun
53. 53
Pull out the #10 wire and trim the tube to an outside dimension of 1-1/2" x 7"
as shown. Do not discard the excess tube!
Next take the 3/8"x 1/2" FIP coupler with insert and slip the compression nut
and compression ring onto the pex pipe.
54. 54
Take the inner tube slip it into the short end of the pex pipe.
Assemble the to the fitting as shown and tighten 1/2 turn after the nut snugs
up on the compression ring. This locks the compression ring to the pex pipe.
55. 55
Disassemble the unit and remove the brass insert. Leaving it in place will
restrict water flow through this tube.
Reassemble the compression fitting finger tight for now and set aside.
56. 56
Now we will assemble the roller block assembly.
Take the 1"x1"x7" block and drill pilot holes and countersinks for the screws to
attach it to the 1"x2-1/2"x4" wood block as shown.
Drill a 5/32 " hole 3/8" in from the end as shown. This is where the steel
leader will pass through.
57. 57
Screw the wood block pieces together using 1-5/8" deck screws as shown.
I cut a groove in the top for the rollers to sit in but it is not necessary as you
can use the screw hole provided to mount the rollers directly on top and drill
another hole and screw the rollers down securely. Cutting a groove eliminates
the need for the second hole in each roller bracket.
58. 58
It would be helpful to install the steel leader at this time to help with the
location of the rear roller. The leader is installed by threading the swivel end
from the top down through the 5/32" hole at the rear as shown.
Using a section of leftover pex pipe 1" long, a #10 S.S. washer and 1/4" split
shot sinker assemble to the steel leader as shown.
59. 59
Install the rollers as shown being careful to align the one roller to allow the
steel leader to freely pass through the hole and the other roller to allow the
leader to hang freely over the end of the roller block assembly. It should look like
this when done.
Now take the water bottle and on the bottom you will see a few raised areas
around the bottom. Carefully take a knife and cut off one of these areas as
shown. This is the opening for the siphon downspout.
60. 60
Now using a drill (or hot nail) drill two 1/8" holes as shown to secure the clip of
the steel leader to.
Flip over the bottle and drill a 5/32 hole in the cap. Don't worry too much
about making a clean hole here. I wait until the unit is running and trim the hole
as needed if the counterweight drains too slowly. If you mess this up just get
another cap and try again until you get it right.
61. 61
Let's Put This Thing Together!!
Take the flood tank and toilet valve.
Assemble the toilet valve with silicone on the gasket and with the gasket on the
inside of the barrel tighten the spanner nut from the outside being careful to not
break the nut by over tightening.
The valve should be oriented in the tank as shown.
From the inside install a 1/2" male pvc adapter with silicone on the threads as
shown and lock it in with a conduit locknut installed from the outside.
62. 62
Install the siphon downspout from the outside as shown. Some sealer on the
threads is helpful here. Tighten securely.
Slightly snug up compression nut at this time just enough to seal. Usually it
takes about another quarter turn past finger tight.
Now, remember the two 1/8" holes above and to the side of the the 3/4" hole
you just installed the fittings to? These will secure the roller block assembly to
the tank. Center the block assembly as shown and secure with the two #10x3/4"
S.S. panhead screws from the inside making sure the unit rests on the top edge
of the tank as shown.
63. 63
Install the water bottle to the steel leader as shown.
Temporarily secure the other end of the leader to the toilet valve flapper
chain. The weight of the bottle may want to keep the flapper from wanting to
seat properly. This is where the 3/8" S.S. washers come into the project. Use as
many washers as needed to counter the weight of the bottle easily plus a couple
extras. If you don't have enough now don't worry you can always add some later
if needed. It usually takes 10 - 12 washers depending on the thickness. The key
is to get the flapper on the toilet valve to close positively and securely when the
water bottle empties.
64. 64
Flip the siphon downspout to the side enough to allow insertion into the water
bottle as shown.
Rotate the bottle and tube down to allow the bottle to hang straight down.
Check to make sure the downspout doesn’t keep the bottle from allowing the
flapper on the toilet valve to close completely with a little slack. Sometimes there
are slight variations in leader lengths (too short) that could cause he flapper to
not close completely. There are two remedies to this problem. The first is make
an extension out of string or wire and tie it to the bottle allowing it to hang a little
lower. The second is mark where the roller block assembly rest’s on the top
edge of the tank and remove the block and trim away a little of the area to lower
the block. Be careful how much you take off though as the amount you remove
will cause a drop in the bottle twice the dimension you dropped the block. For
example, if you take 1/4” off the top of the tank it will result in a lowering of the
bottle 1/2”.
65. 65
Install the adjustable siphon assembly to the male adapter as shown checking
to see that the cable assembly clears the tubes through the full range of
operation. There should be no binding in any part of the leader bottle
movement. It should all move freely.
Now we can test the function of the unit before installing it to the frame
assembly.
Set the unit on some blocks making sure the toilet valve outlet is unobstructed.
66. 66
Begin filling the floodtank with buckets or a garden hose turned on low.
Watch as the water level approaches the top of the siphon. It should start
filling the water bottle.
67. 67
When the water bottle gets heavy enough it will pull open the toilet valve.
It is normal for the toilet valve to begin leaking a bit before it is fully pulled
open. Continue filling the tank as it drains to mimic full time pump operation.
When the water bottle empties it will allow the flapper to fall closed and seal off
the tank for the next cycle. If the flapper didn't close properly you may need to
add more washers to weigh it down. It should have just enough weight to close
positively and no more! Too much weight will make the valve unnecessarily hard
to open.
The top of the adjustable siphon adjusts the max volume of the flood cycle.
The adjustable siphon downspout setting controls when the water bottle quits
filling. If this is set too low it will cause the flapper valve to hang open long after
the tank has dumped. If it is set too high it will allow the flapper to close
prematurely. It will have to be tuned once in operation. Experiment with different
settings and the operation will become clear. This is the beauty of the floodvalve
system. You can adjust the floodvalve to the changing needs of plants in the
growbeds. If you need a wetter environment increase the pump flow to the tank
and flood volume if needed. Growing plants with drier requirements? Cut it back
some. Growbeds getting crowded with roots? Adjust as needed. Every aspect
of the flood and drain parameters are adjustable with this system.
If there is a problem with the operation of the unit please refer to the
instructions and pictures again for reference.
68. 68
If all works well install the manifold adapter with some sealant on the threads
as shown.
Sit the flood tank on the framework and install the manifold . The water bottle
should hang to allow it to drain into one of the growbeds.
69. 69
The Floating Raft Tank
If you notice on the front cover there is a unit on top of the flood tank
assembly. This is where we use the leftover part of the barrel used in the
floodtank assembly to build another grow space. This system of soiless growing
is called "Floating Raft" and is just as the name implies. Plants are grown in net
pots with their roots dangling in a nutrient rich solution (fish water). I have grown
lettuce this way and it works well. Another option is to use this space to grow
water plants as a supplemental feed source for the fish. This would require a
slightly different arrangement but is not difficult at all to do. An explanation is in
the “Options” section.
Take the top half of the barrel set it upside down on a flat surface and mark a
line 6-1/2" from the surface as shown.
70. 70
Cut the barrel here to make a shallow tank and drill a 1" hole about three
inches in from the edge where the top is flat as shown. The actual distance is not
all that critical as this is merely a standpipe to set the water level in the the tank.
Install a 3/4" pvc male adapter from the inside and slip the 4" long pvc sch. 40
into it.
71. 71
Directly across from the fitting you just installed, drill a 3/4" hole 1" from the
top edge as shown.
Install a 1/2" male adapter from the inside with a 1/2" conduit locknut installed
on the outside as well as a 1/2" npt x 1/2" barb onto the male adapter threads.
Tighten the fitting securely. Install a 1-3/4" section of 1/2" pvc pipe and a 1/2"
pvc ell as shown on the inside of the raft tank. This is the water inlet from the
pump. When the water flows from the pump through this fitting it fills the raft
tank until it overflows into the standpipe and falls into the flood tank. When
assembled it should look like this.
To adjust the flow from the pump one could pinch the 1/2" black tubing that
runs from the pump to this fitting as needed. Adjusting flow to the tank will
determine flood cycle times. Lower flow = longer time between floods. Higher
flow = shorter time between floods. I usually use a 1/2” hose bib instead of the
1/2” male adapter, 1-3/4” section of pipe and 1/2” pvc ell to adjust the flow. An
explanation of this is in the options section.
72. 72
With the leftover 2x4 piece from the frame assembly cut one piece 23" long
and one piece 21".
Using 3" deck screws make a "T" as shown. This is the spacer to set the raft
tank on to the top of the flood tank.
73. 73
Using a piece of foam sheet large enough to fill the inside of the raft tank cut
a piece just large enough to float freely with no binding. Set this disk in the top
and press on the standpipe to make an indent to locate where to cut a hole in the
foam sheet to clear the standpipe. Flip the sheet over and cut a hole to allow
clearance of the standpipe as shown. In this photo you can see the holes also
cut in the foam sheet to hold the net pots as well as clearance for the hose bib
being used to control the flow to the raft tank.
Depending on the plants you plan to grow cut holes for the net pots equally
spaced from each other. I grow 11 lettuce plants in my system.
Set the "T" frame on top of the floodtank as shown.
74. 74
Set the raft tank on top of the floodtank as shown.
Another option that you could do instead of building a “tee” for the raft tank
spacer you could make a rectangular bracket with a leg that would hold it on five
points rather than three. This would help the tank not to sag as it will a little bit
with the T-brace set-up. The sagging doesn’t seem to affect the operation of the
unit. It just doesn’t look as good. The T-brace saves on lumber though.
Notice the “leg” is offset from center to clear the roller block assembly
75. 75
Movin' the Water
Now for a word about pumps and such. If you have electric pumps available
to you, you will need a pump capable of at least 60 gph at a 7' head (the system
will run on as little as 40 gph but you will want to aerate some water). What does
all this mean? Most pump capacities you see in the big print on the package is
at 0 ft. head. This means if you see a pump rated at 400 gph it probably won't
begin to push the water to the 7' required to operate this system. Bilge pumps
are a bit of an exception to this rule as they are expected to lift water to at least
three feet and are rated to do so. You will need to look in the packaging of the
pump and read the chart to find out what the max. head is and the flow at that
head. We are not really concerned with pressure at a certain lift, just volume of
water in gph. That being said, the 60 gph is a bare minimum and if you are
wanting to get the most performance out of your system please don't skimp here.
I have used very small pumps to run this system in tests and they do work but
require constant cleaning and flushing of the tubing to keep things working. It is
also very hard for a pump to be working at maximum for long period of time and
keep the reliability high. Try to size a pump that will be work at about 60% or
less (even better) of it's rated output for a good reliable system as it will be
running continuous.
There are several different pump types out there but you will find centrifugal
pumps will be the best for this type of use. Submersible pumps are fine however
I prefer to have things out where I can maintain them easily. I also prefer to use
magnetic drive pumps because the motor continues to run even if the impeller
gets clogged with debris. This type of pump is also nice when it comes time to
replace a worn out pump as you can get replacement heads and reuse the
motor. The type of pump I have had the best success by far with is the type used
in marine air conditioning systems. They are a variety of manufacturers and all
of them are good. Sometimes I find good deals on ebay as these are typically
very expensive ($300.00 and up new). Some marinas have some rebuildable
ones in their junk pile that have good motors but the pump section is worn out.
Just order a replacement pump kit and you are as good as new.
As far as 12V bilge or baitwell pumps go, I have used them successfully but
they have a weakness. Debris that can get sucked up into the impeller can stop
the pump and will blow the fuse and shut the system down. If this happens often
it will eventually burn out the pump. One way to avoid this is to use some type of
strainer or pre-filter to keep the debris out. One word of wisdom though, these
pumps are not designed to be used full time and will on average fail faster than a
pump designed for continuous use. However, they tend to be very inexpensive
compared to the some options and could be a good choice for a 12VDC system
if a better pump is not available. They will just need to be replaced more often.
Another option for a 12VDC system would be to use a magnetic type baitwell
pump. They are more expensive but should live longer. Look very closely at the
spec. sheet though to determine if the pump will have the output needed.
This system by no means is limited to electric pumps. That's the beauty of
76. 76
the flood valve. Any method that can reliably move the water can be used.
Some examples are solar panels hooked to 12V pumps, wind power (either
directly driving a pump or using wind to generate power), using a water wheel in
a flowing stream to drive a circulation pump, gas or diesel powered pumps (for
larger applications) even human or animal powered pumps would work. The
limit is your or your neighbors imagination!!
Plumbing it all together
This section will vary according to the pump you use and the materials you have
available to plumb it all together. Here in the states this is what I do. I use, as my
primary hose, 1/2" black poly pipe commonly used in underground irrigation
systems. There are several reasons for this. First it is cheap and easily found at
any home improvement big box store in the US. Second it doesn't promote the
growth of algae as it is black and won't let the sun shine in. If you ever use clear
tubing you will find out what I am taking about as it won't take long for algae to
begin growing and restrict the flow of water as it reduces the inside diameter.
Third it is easy to connect. I use the gray poly barbed fittings to connect it all
together and rarely need any clamps. Usually have to heat it a little bit to push it
on the barb.
Now as far as plumbing the pump to the fish tank I use at least 3/4" hose in the
short section from the ball valve and the pump inlet. I do use a clear hose here
so I can see if there is any trash in the line blocking the flow.
This is what it looks like.
77. 77
I would also advise using standard garden hose fittings as shown to make it a
tool-less operation to clean out the inlet when needed.
After hooking up the fish tank to the pump inlet I come out of the pump with
the 1/2" black poly pipe and connect this tube to a "tee" with one side going to
the raft tank and the other going to the fish tank hooked to a homemade aerator.
78. 78
I make my aerator using a 3/4" npt to 1/2"barb fitting. I drill a 3/4” hole near
the edge of the fish tank opening on the opposite end from the outlet.
I then take a 3/4" threaded pvc cap and drill several small holes to make what
looks like a small showerhead (which is exactly what it is).
79. 79
Fit the barb through from the inside with the barb sticking through to the
outside. Slip the black poly tubing on here to capture the fitting in the edge of
the fish tank (sometimes I have to warm up the tubing to make it easier to
install).
The excess water is automatically diverted back to the fish tank and aerated to
improve the overall health of the system. This works quite well when if for some
reason (blockage or pump wear) the water doesn't get to the raft tank it will still
allow for some aeration to the fish tank.
80. 80
Options
There are a few variations one might want to do with this project. I tried to
keep the initial project as simple as possible but in the process had to give up
some sportiness.
One option I have been doing is making the flood tank and raft tank one unit
without the 2x4 spacer. To do this cut the flood tank at 22-1/2" instead of 17-1/2"
and making four equal legs and attaching them to the inside of the lip of the raft
tank. It can be secured using 8 each #10 x 3/4" S.S. panhead sheet metal
screws. You would have to maintain the 17-1/2" dimension from the bottom for
one of the openings for the roller block assembly at the proper location to attach
to but could make a slightly deeper cutout for the other three openings for easy
adjustment of the adjustable siphon. Here's a recent photo of the first one I built
like this back in July of 2004.
81. 81
To grow floating aquatic plants in the raft tank simply install a screen of some
sort around the standpipe. This would allow the water to flow without drawing
the plants into the standpipe. One might use a section of the slitted sewer pipe
slightly taller than the standpipe glued to the tank with silicone sealer. Be sure to
let the sealer set up good before filling the tank. Be sure the screen is taller than
the standpipe and shorter than the edge of the raft tank.
To make adjustment of water to the raft tank easier simply omit the 1/2" pvc
fittings used on the inside of the raft tank and replace with a standard 1/2" hose
bib. You then simply adjust the flow with the turn of a knob. It does require
opening it up to full from time to time to allow any gunk or debris to clear.
82. 82
To replace the roller block assembly if materials are not available in your area
one could use #9 wire to make a see-saw type of arrangement with the water
bottle connected with wire or string on one side and the toilet valve chain hooked
up with wire or string on the other side. A hole would be drilled in the side of the
tank as high as possible. The wire (with a "v" bent into the middle) would be fed
through this hole with the "v" resting in the hole to allow it to rock without sliding.
The "v" would have to be deep enough and bent at the proper angle to limit the
amount of pull on the toilet valve flapper. If the water bottle is allowed to pull it's
full weight on the rubber flapper it will eventually tear the chain out of the rubber.
The water bottle would be on the outside of course. I will probably be using this
arrangement in Kenya as it is a much more doable design where resources are
somewhat limited. Here is a photo of the prototype of this design.
83. 83
To replace the pex pipe assembly, if parts are not available, one could use a
1/2" threaded ell (made from a 1/2” pvc female adapter connected to a 1/2”
threaded pvc ell using a short section of 1/2” pvc pipe) attached to the 1/2"male
adapter threads sticking out from the adjustable siphon assembly. Thread a 1/2"
npt x 1/4"barb to the 1/2" threaded ell pointing down. Slip a 7" segment of 1/4"
tubing onto it to go inside the water bottle counter weight. The steel leader will
have to be replaced with string or a piece of wire as shown. This modification
may require the flood tank to be mounted higher to allow the water bottle to clear
the growbed when in the full down position which may require some redesign of
the flush valve manifold adapter assembly. Another option would be to remove
some of the gravel out of that corner of the growbed to possibly gain the
clearance needed.
84. 84
To reduce maintenance of algae growth in the water bottle is to use a section
of sewer pipe to encapsulate the water bottle to reduce sunlight exposure. This
is what that might look like. Notice the pipe in anchored in the gravel and should
allow the bottle to freely move up and down as needed. It is not as much fun to
watch this way though. Another idea would be to paint the bottle black. This
would restrict being able to see what is going on with the siphon downspout.
Mod with bottle in “up” position.
Mod with bottle in “down position”. This will also help keep plant growth from
fouling the operation of the floodvalve.
85. 85
Installing a balance tube between the grow beds insures one bed doesn't
ultimately fill before the other. To do this scoop away the gravel from the front of
the grow beds and drill a 1-1/8" hole in the end of each growbed at
approximately the same place midway between the drain fitting and the top of
the gravel. Using silicone on the threads of 1" pvc male adapters thread them
into these holes. Slip fit short sections (about 2" long) of thin wall 1"pvc pipe into
these and install 1" pvc ells facing each other. Now measure the distance
between the inside edges of the ells where the pipe would fit inside the ell. Cut a
length of thin wall 1" pvc pipe to this dimension. Remove the ells and install on
the pipe you just cut. Re-install this assembly to the growbeds and tap them
securely into place. Do not use glue on these fittings.
To prevent gravel from filling the balance tube use a short segment (usually
about 6") of sewer pipe cut in half lengthwise at the mold seam. Remove the
gravel in front of the balance tube fitting and slip one half of the split sewer pipe
in front of the 1" pvc male adapter threads to create a void in front of the male
fitting and backfill with gravel to hold in place. Do the same for the other side.
86. 86
Some sort of shock absorber arrangement on the steel leader to reduce the
shock on the water bottle during the pull to open flapper would be a good idea.
This could be a short spring installed between the water bottle and leader
connection. One would have to be careful to make sure it is not so long to allow
the siphon downspout to clear the water bottle entirely. Another option would be
to shorten the pex pipe section on the steel leader attached to the toilet valve
chain and install some soft rubber disks in place. One might even do a sandwich
disk arrangement here using alternating rubber and some material like scotch
brite pad pieces. Anything that would be waterproof and springy to absorb the
shock on the line.
There are many other "options" possible I'm sure. As they say "Necessity is
the Mother of Invention". If you come up with some new ideas let me know. I'd
love to hear about them.
Please e-mail me at:
aquaponic70@yahoo.com
87. 87
Maintenance
This is going to be a relatively short section as there really isn't much that I
have had to do.
The first thing is to be aware of the flow from the pump to the raft tank. An
easy way to tell is reach up and place your thumb over the opening to tell what
kind of flow you should have. Do this when the system is first set up for a
reference here. Most of the time the lack of flow is a result of debris in the pump
inlet. Check here to verify all is clear. Another possible source of restriction is
growth in the lines. There is usually some sort of slimy buildup in the piping
over time. This is good stuff and should be put back in the system in the
growbeds. From time to time I have to remove the tube from the raft tank and
lower it into a bucket while the pump is running. This gunk will flow out and I
keep it flowing until it runs clean. Pour the contents of the bucket into the
growbeds. The gunk in the lines is part of the biological system.
Another place that needs attention is the water bottle. It being clear will grow
algae and will have to be cleaned every so often. To do this remove the cap and
put some gravel from the growbed in it with some water and while holding your
fingers over the holes shake it around until the algae is knocked off. Rinse the
bottle and re-install it to the unit. Verify it drains properly though as sometimes
stuff gets lodged in the drain hole during the clean-up.
The growbed outlets sometimes get restricted with root growth (tomato's and
cucumbers are notoriously bad characters in this department). I use a small tool
made from stainless steel wire from the inside of boat shift cables. I make a
corkscrew by wrapping the wire tightly around the threaded end of a 1/4" bolt 5
or six wraps. Cut one end off taking away part of one wrap and then bend the
other end to form what looks like a corkscrew on the end of a wire.
88. 88
A couple of bends to make a simple crank and I have a tool that can fit inside
the growbed drain tubes and grab the roots and rip them out to clear the drains.
The plants do just fine with this so don't worry about killing your vegetables.
You will have to remove the drain downspouts to perform this "operation".
From time to time the raft tank standpipe gets restricted with algae growth.
The 3/4" schedule 40 pipe has an inside diameter just barely large enough to
allow a section of the 1/2" black poly tube to slip inside. I keep a short section
handy to clear the standpipe when needed.
Sometimes algae will build up inside the siphon downspout (pex pipe) and will
have to be cleared. It is also possible to get a bug every now and then inside
that will stop the small siphon from working. One could put a piece of screen
wire (preferably fiberglass type) over the inlet of the adjustable siphon inlet and
secured with a clamp of some sort. This will have to be cleaned from time to
time as well. I personally don't do it since I am in a greenhouse but if you don't
have a greenhouse and the system has free access to the outdoors I can see
where it would be needed.
It is always a good idea to always have a back-up plan for a pump failure.
Either keep another pump on standby or keep a rebuild kit handy. One thing I
have found is things will fall apart when least expected. Be prepared or lose the
system!! The choice is yours.
89. 89
Starting the System
Fill the fish tank to the top with water and start the pump.
You would want to add some food grade Hydrogen Peroxide or I have heard of
some using bleach to disinfect the system. The idea is to get as sterile an
environment to start off with. Don’t want to start the system with any diseases
right off the start.
Water should fill the top tank and flow through the standpipe to the flood tank.
Set the top of the siphon to the max height and wait for the system to actuate the
flush valve.
Look at the growbeds and adjust the level of the manifold to fill the growbeds
equally. This may take a few cycles.
Also, look at the volume of water dumped per cycle. If it is too much lower the
top of the siphon until the volume stops at just below the top of the surface of the
gravel.
If the siphon fills the counterweight for too long this too can be adjusted by
raising the bottom of the internal siphon tube being careful to not change the top
setting.
Let the system run a couple of days to allow the Hydrogen Peroxide or Chlorine
to gas out of the water.
Once the system is up and running consistently for a couple days check and
adjust the pH. Adjusting the pH using un-iodized salt (preferably sea salt) to
raise it and vinegar to bring it down. Add a small amount of healthy pond or lake
water or biofilter starter and some fish. I would suggest cheap feeder goldfish to
begin with as there is a strong likelihood some will die while the system
stabilizes. This is not the time to use some of your neighbors high dollar Koi to
help out your project!!
Now would be a good time to plant some easy growing seeds in the gravel beds.
Beans are a good choice for starters as the sprout quickly and will begin taking
up nutrients.
As far as checking the system with a water test kit goes you will see the following
happen:
First the ammonia will run up quite high. This is normal as the fish will be
producing it and the nitrifying bacteria haven't built up yet. If you start losing fish
at this stage simply remove some of the water and add some well water if
possible. If well water is not available it might be advisable to have some
sterilized water on hand. Remember this handy rule “The solution to pollution is
dilution”
When the Nitrosomonas bacteria have built up to sufficient levels you will see
the ammonia to go to zero very quickly. This stage is where I killed a good many
fish. In my impatience I started loading up the fish at just the wrong time!! The
second phase of nitrification has yet to get started. The nitrites will go very high
now until the Nitrobacter reach sufficient levels to reduce the nitrites to almost
90. 90
zero. This is a very critical time as the nitrites are very toxic to the fish.
The nitrates will then rise and this is where the system is producing the
nutrients for the plants to get healthy. This can take a few weeks to stabilize so
don’t get impatient.
Don't overfeed the fish and you are on your way to a very enjoyable hobby
and a wonderful way to weed free gardening. Have a seat and just watch and
enjoy your hard work!! Once your system is up and stabilized you will almost be
able to watch the plants grow!!
91. 91
Why I do What I Do
It was suggested I include a section in this manual to express my motivation
and inspiration for what I do and my motivation to make this manual free of
charge in this day of everything at a cost. To put it plainly I am an unabashed
Christian. I was born again at an early age and have committed my life to
serving Jesus Christ in any way He sees fit. Sometimes that has led to more
conventional service such as church planting. For a period of over 20 years it
was writing Contemporary Christian Music and performing it in any venue
available from churches, to prisons, on the streets and coffeehouses and in
juvenile delinquent centers, etc... I have even done concerts in high schools
when that was still allowed. As of the past few years I have had a business
repairing yachts and am now developing technologies to assist the more
impoverished peoples of this world. There is a passage in Matthew 25:31-46
where the question was asked of Christ by the people entering into Heaven
“When did we feed you, give you water, clothe you or take you in?”. He said “In
as much as you did it unto the least of these my brothers, you did it unto me“.
This is my focus. So much of our time nowadays is consumed with the process
of getting more. I believe we must be consumed with the process of giving more.
It is the example that Christ gave when He gave His life for us freely (John 3:16,
Romans 5:8). He gave the gift of eternal life with no strings attached. He will
take us just as we are. No prior purification or good works required. No cost
involved other than what He paid for us with His life. This is why I cannot, in
good conscience withhold, to a father or mother who is having a hard time
feeding their children, information that may help unless they pay me something.
I am by no means inferring that others are wrong to charge for such information.
This is simply my personal conviction. I will however ask, if it is within your
means to help us in this venture and make a donation to help it would be greatly
appreciated. Donations can be made through PayPal.com. My e-mail address
to use at the PayPal site is aquaponic70@yahoo.com.
If it is outside your means, no problem. Please take this information and
hopefully it will help you feed your children and please know God has heard you
and your children’s prayers. This is just a small way He is letting you know.
92. 92
A Little Bit Of What To Look Forward To
A few pictures of what I’ve grown in my large system as well as Barrel-ponics unit.
Picture of my greenhouse in March of 2005
Papaya’s anyone!!
93. 93
Papaya’s do well in an aquaponics system.
Just need to support the plants when they mature.
Cilantro/coriander cascading from a growbed.
94. 94
Contrary to some opinions, tomatoes do very well.
Tomatoes loaded up on the vine.
95. 95
Now that’s a Roma!!
Can’t do it without the nutrient supply!!
96. 96
Basil for sale and pesto. Yum Yum!!
These beans shot up 4” the first day they broke the surface of the gravel beds.
98. 98
Water Hyacinth grown for fish feed.
A picture of the greenhouse 4 months after starting my first aquaponics system.
The tall plants in the background are tomatoes. The ones on the far left are cucumbers
climbing on stock panels used for a trellis. Plants in mid area is dill and water hyacinth in
foreground. There is also basil, radishes, beets and carrots grown in this picture.
99. 99
Growing lettuce in PVC pipes and net pots using only fish water as nutrient source.
Close-up of the nutrient source.
100. 100
This is me checking out some of the Tilapia.
Swiss chard and Stevia.