www.hoccokhi.vn - Trung tâm đào tạo Inventor, AutoCAD, Solidworks, Mastercam. Bài tập Inventor 2D và 3D lắp ráp assembly. Bài tập inventor từ căn bản đến nâng cao. Bài tập Inventor tự học luyện Inventor tại nhà. Bài tập Inventor tại trung tâm đào tạo Inventor Học Cơ Khí. Bài tập thực hành Inventor 2D cho người mới bắt đầu. Bài tập thực hành Inventor 2D giúp các bạn luyện các lệnh từ dễ đến khó. Bài tập thực hành Inventor 2D giúp nắm vũng kỹ năng thiết kế Inventor 2D. Học Inventor Solidworks từ cơ bản đến nâng cao liên hệ: 0336662767 (Mr.Thảo)

1. 821.532.3
719.5 28.3517 20.4
123.5 4.9109 4.3
253.510.0151.56.0
1435.6219.58.6
231.5 9.1
953.7
117.5 4.6113.5 4.5131.5 5.2105 4.1
J.A.M. DE WAAL PAPAKURA NZ
PROJECT No 09C-16-00 PROJECTION
A3
Copyright ©
TITLE
DWG SCALE: 1:4.5 @A3 OR AS SHOWN
DRAWING CONTENTS MODEL SCALE: 1:1
J.A.M. DE WAAL. 12 BRIGHTWELL STREET PAPAKURA 2110.
NEW ZEALAND. PHONE: OO64 09 2988815. MOB: 0211791000
E-MAIL: dewaal@xtra.co.nz.
JDW DRAUGHTING SERVICES
NOTES: THIS STEAM PLANT IS BASED ON DRAWINGS AND ARTICLES WHICH APPEARED IN THE "MODELBOUWER" OF 1973
DATE
No: STMINST-01SHEET: 01 OF 12
DECEMBER-2015GENERAL ARRANGEMENT.COMPLETE STEAM PLANT INCLUDING TWO
STEAM ENGINES (1CYL + 2CYL VERTICAL)
JDWDS
Hotline: 033 666 2767
Kênh Youtube: Học Cơ Khí
Facebook: https://www.facebook.com/HocCoKhi
Website: www.hoccokhi.vn www.cokhi.org
Email: hoccokhi.info@gmail.com
shared
by
hoccokhi.vn
Tải nhiều tài liệu và video tự học miễn phí tại www.cokhi.org

2. THE BOILER SHOULD BE TESTED TWICE THE MAXIMUM WORKING PRESSURE 8BAR (116PSI)
THE MAXIMUM WORKING PRESSURE OF THIS PLANT IS 4BAR (58PSI)
HERCULES
NEPTUNES
J.A.M. DE WAAL PAPAKURA NZ
PROJECT No 09C-16-00 PROJECTION
A3
Copyright ©
TITLE
DWG SCALE: NTS @A3 OR AS SHOWN
DRAWING CONTENTS MODEL SCALE: 1:1
J.A.M. DE WAAL. 12 BRIGHTWELL STREET PAPAKURA 2110.
NEW ZEALAND. PHONE: OO64 09 2988815. MOB: 0211791000
E-MAIL: dewaal@xtra.co.nz.
JDW DRAUGHTING SERVICES
NOTES: THIS STEAM PLANT IS BASED ON DRAWINGS AND ARTICLES WHICH APPEARED IN THE "MODELBOUWER" OF 1973
DATE
No: STMINST-02SHEET: 02 OF 12
DECEMBER-2015ISOMETRIC VIEWS AND NOTESCOMPLETE STEAM PLANT INCLUDING TWO
STEAM ENGINES (1CYL + 2CYL VERTICAL)
JDWDS
Hotline: 033 666 2767
Kênh Youtube: Học Cơ Khí
Facebook: https://www.facebook.com/HocCoKhi
Website: www.hoccokhi.vn www.cokhi.org
Email: hoccokhi.info@gmail.com
shared
by
hoccokhi.vn
Tải nhiều tài liệu và video tự học miễn phí tại www.cokhi.org

3. QTY. PART NUMBER
1 BURNER-04-01-SECONDARY SPIRIT TANK
1 BURNER-04-02-MAIN FEED PIPE
1 BURNER-04-03-BURNER WICK HOLDER
1 BURNER-04-03-BURNER WICK HOLDER
2 BURNER-04-04-BURNER
1 BURNER-04-05-PRIMARY SPIRIT TANK
1 BURNER-04-06-PRIMARY SPIRIT TANK FILLER NIPPLE
1 BURNER-04-07-PRIMARY SPIRIT TANK FILLER PLUG
1 BURNER-04-08A-PRIMARY SPIRIT TANK LEVEL CONTROL PIPE
1 BURNER-04-08B-SPIRIT TANK VALVE BASE
1 BURNER-04-09-CONTROL VALVE
1 BURNER-04-10-CONTROL VALVE SPRING
2 BURNER-04-11-SPIRIT TANK SUPPORT LEG
1 BURNER-M3 BRASS WASHER
5 BURNER-M3 NUT
4 BURNER-M3x5 HEX BOLT BRASS
1 BURNER-M4 BRASS WASHER
1 BURNER-M4 NUT
QTY. PART NUMBER
1 HERCULES-01-01-BASE PLATE
2 HERCULES-01-02-REAR COLUMN
1 HERCULES-01-03-FRONT COLUMN
3 HERCULES-01-04-MAIN BEARING
1 HERCULES-01-05-CROSSHEAD GUIDE PLATE
2 HERCULES-01-06-CROSSHEAD GUIDE SPACER
2 HERCULES-01-07-CROSSHEAD GUIDE
1 HERCULES-01-08-CYLINDER
1 HERCULES-01-09-CYLINDER TOP COVER
1 HERCULES-01-10-CYLINDER BOTTOM COVER
1 HERCULES-01-11-PISTON ROD GLAND
1 HERCULES-01-12-PORT BLOCK
1 HERCULES-01-13-VALVE BOX
1 HERCULES-01-14-PORT BLOCK VALVE SLIDE PLATE
1 HERCULES-01-15-VALVE ROD GLAND
1 HERCULES-01-16-VALVE BOX COVER
1 HERCULES-01-17-VALVE ROD TOP GUIDE
1 HERCULES-01-18-STM SUP VALVE BODY
1 HERCULES-01-19-STM SUP VALVE CONNECTOR
1 HERCULES-01-20-STM SUP VALVE STEM NUT-1
1 HERCULES-01-21-STM SUP VALVE STEM
1 HERCULES-01-22-STM SUP VALVE HAND WHEEL
1 HERCULES-01-23-STM SUP VALVE STEM NUT-2
1 HERCULES-01-24-LUBRICATOR OIL VESSEL
1 HERCULES-01-25-LUBRICATER VALVE STEM NUT
1 HERCULES-01-26-LUBRICATOR VALVE HAND WHEEL
1 HERCULES-01-27-LUBRICATOR VALVE STEM
1 HERCULES-01-28-LUBRICATOR BOTTOM PLUG
1 HERCULES-01-29-LUBRICATOR DRAIN PIPE
1 HERCULES-01-30-LUBRICATOR FILLER SCREW
1 HERCULES-01-31-CRANKSHAFT
1 HERCULES-01-32-FLYWHEEL
1 HERCULES-01-33-VALVE ECCENTRIC SHEAVE
1 HERCULES-01-34-CROSSHEAD
1 HERCULES-01-35-PISTON ROD
1 HERCULES-01-36-PISTON
1 HERCULES-01-37-CON-ROD
1 HERCULES-01-38-CON-ROD TOP PIN
1 HERCULES-01-39-ECCENTRIC STRAP
1 HERCULES-01-40-ECCENTRIC STRAP ROD
1 HERCULES-01-41-SLIDE VALVE
1 HERCULES-01-42-SLIDE VALVE NUT
1 HERCULES-01-43-SLIDE VALVE ROD
1 HERCULES-01-44-SLIDE VALVE ROD CONNECTOR
1 HERCULES-01-45-WATT REGULATOR DRIVE PULLEY
1 HERCULES-01-46-WATT REG MOUNTING BODY
1 HERCULES-01-47-WATT REG GEARWHEEL BRACKET
1 HERCULES-01-48A-WATT REG ROCKER BRACKET
1 HERCULES-01-48B-WATT REG VERT WEIGHT SHAFT
2 HERCULES-01-49A-WATT REG BEVELLED GEAR WHEEL
1 HERCULES-01-49B-WATT REG GEAR WHEEL SHAFT
1 HERCULES-01-50-WATT REG DRIVEN PULLEY
2 HERCULES-01-51-WATT REG WEIGHT
1 HERCULES-01-52-WATT REG SLIDER
2 HERCULES-01-53-WATT REG SLIDER LINK
1 HERCULES-01-54-WATT REG ROCKER ARM
1 HERCULES-01-55-WATT REG DRIVE BELT
1 HERCULES-01-56-STM CTRL VALVE HOUSING
1 HERCULES-01-57-STM CTRL VALVE SPINDLE
1 HERCULES-01-58-STM CTRL VALVE DISC
2 HERCULES-01-59-STM CTRL VALVE HOUSING COVER
1 HERCULES-01-60-STM CTRL VALVE SPINDLE BEARING
QTY. PART NUMBER
1 HERCULES-01-61-STM CTRL VALVE SPINDLE NUT
3 HERCULES-01-62-STM CTRL VALVE PIPE NUT
1 HERCULES-01-63-STM CTRL VALVE LEVER
1 HERCULES-01-64-STM CTRL VALVE LEVER LINK
1 HERCULES-01-65-STEAM SUPPLY PIPE
1 HERCULES-01-66-FEED PUMP ECCENTRIC
2 HERCULES-01-67-PLUG
1 HERCULES-01-68-EXHAUST PIPE CONNECTOR
1 HERCULES-01-69-M8x6 PIPE NUT
1 HERCULES-01-70-EXHAUST STEAM PIPE
1 HERCULES-01-71-ECCENTRIC STRAP PIN
15 HERCULES-M2.5 NUT
2 HERCULES-M2.5x3.5 GRUB SREW
4 HERCULES-M2.5x8 HEX BOLT
2 HERCULES-M2.5x20 STUD
8 HERCULES-M2.5x26 STUD
8 HERCULES-M2 NUT
1 HERCULES-M2x2 GRUB SREW
4 HERCULES-M2x23 STUD
1 HERCULES-M3 BRASS WASHER
9 HERCULES-M3 NUT
2 HERCULES-M3x5 GRUB SREW
2 HERCULES-M3x7 GRUB SREW
8 HERCULES-M3x8 HEX BOLT
14 HERCULES-M3x12 HEX BOLT
4 HERCULES-M3x15 HEX BOLT
1 HERCULES-M4 DOME NUT
1 HERCULES-M4 NUT
6 HERCULES-M4x20 HEX BOLT
4 HERCULES-M4x25 C-SINK SCREW
2 HERCULES-M5 DOME NUT
2 HERCULES-M5 NUT
QTY. PART NUMBER
1 NEPTUNES-02-01-GROUND PLATE
1 NEPTUNES-02-02-BASE PLATE
2 NEPTUNES-02-03-FRONT COLUMN
2 NEPTUNES-02-04-REAR COLUMN
3 NEPTUNES-02-05-MAIN BEARING
2 NEPTUNES-02-06-CROSSHEAD GUIDE PLATE
4 NEPTUNES-02-07-CROSSHEAD GUIDE SPACER
4 NEPTUNES-02-08-CROSSHEAD GUIDE
1 NEPTUNES-02-09-CYLINDER MOUNTING PLATE
2 NEPTUNES-02-10-REVERING SHAFT BEARING
1 NEPTUNES-02-11-REVERSER SHAFT BRACKET
2 NEPTUNES-02-12-VALVE ROD GUIDE
2 NEPTUNES-02-13-CYLINDER
2 NEPTUNES-02-14-CYLINDER TOP COVER
2 NEPTUNES-02-15-CYLINDER BOTTOM COVER
2 NEPTUNES-02-16-PISTON ROD GLAND
2 NEPTUNES-02-17-PORT BLOCK
2 NEPTUNES-02-18-VALVE BOX
2 NEPTUNES-02-19-PORT BLOCK VALVE SLIDE PLATE
2 NEPTUNES-02-20-VALVE ROD GLAND
2 NEPTUNES-02-21-VALVE BOX COVER
2 NEPTUNES-02-22-VALVE ROD TOP GUIDE
2 NEPTUNES-02-23-STM SUP VALVE CONNECTOR
1 NEPTUNES-02-24-CRANKSHAFT
1 NEPTUNES-02-25-FLYWHEEL
4 NEPTUNES-02-26-VALVE ECCENTRIC SHEAVE
2 NEPTUNES-02-27-CROSSHEAD
2 NEPTUNES-02-28-PISTON ROD
2 NEPTUNES-02-29-PISTON
2 NEPTUNES-02-30-CON-ROD
2 NEPTUNES-02-31-CON-ROD TOP PIN
4 NEPTUNES-02-32-ECCENTRIC STRAP
4 NEPTUNES-02-33-ECCENTRIC STRAP ROD
2 NEPTUNES-02-34-SLIDE VALVE
2 NEPTUNES-02-35-SLIDE VALVE NUT
2 NEPTUNES-02-36-SLIDE VALVE ROD
2 NEPTUNES-02-37-SLIDE VALVE ROD CONNECTOR
2 NEPTUNES-02-38-REVERSING ROCKER PLATE
2 NEPTUNES-02-39-REVERSING ROCKER SLIDE BLOCK
1 NEPTUNES-02-40-REV OPERATING SHAFT
1 NEPTUNES-02-41-REV OPER SHAFT HAND WHEEL
1 NEPTUNES-02-42-REV OPERATING SHAFT NUT
1 NEPTUNES-02-43-REV CROSS SHAFT
1 NEPTUNES-02-44-REV CROSS SHAFT CRANK
2 NEPTUNES-02-45-REV CROSS SHAFT LEVER
4 NEPTUNES-02-46-REV ROCKER PLATE LINK ROD
2 NEPTUNES-02-47-CYLINDER SIDE GLADDING
1 NEPTUNES-02-48-CYLINDER TOP GLADDING
QTY. PART NUMBER
1 NEPTUNES-02-49-STM SUP VALVE BODY
1 NEPTUNES-02-50-STM SUP VALVE STEM NUT-1
1 NEPTUNES-02-51-STM SUP VALVE STEM
1 NEPTUNES-02-52-STM SUP VALVE HAND WHEEL
1 NEPTUNES-02-53-STM SUP VALVE STEM NUT-2
2 NEPTUNES-02-54-STEAM SUPPLY PIPE
3 NEPTUNES-02-55-STEAM SUPPPLY PIPE NUT
1 NEPTUNES-02-56-LUBRICATOR OIL VESSEL
1 NEPTUNES-02-57-LUBRICATER VALVE STEM NUT
1 NEPTUNES-02-58-LUBRICATOR VALVE HAND WHEEL
1 NEPTUNES-02-59-LUBRICATOR VALVE STEM
1 NEPTUNES-02-60-LUBRICATOR BOTTOM PLUG
1 NEPTUNES-02-61-LUBRICATOR DRAIN PIPE
1 NEPTUNES-02-62-LUBRICATOR FILLER SCREW
2 NEPTUNES-02-63-EXHAUST STEAM NIPPLE
2 NEPTUNES-02-64-EXHAUST PIPE NUT
4 NEPTUNES-02-65-PLUG
1 NEPTUNES-02-66-EXHAUST PIPES
4 NEPTUNES-02-67-ECCENTRIC STRAP PIN
4 NEPTUNES-2-68- M3x18 SPECIAL HEX BOLT
34 NEPTUNES-M2.5 NUT
8 NEPTUNES-M2.5x3.5 GRUB SREW
20 NEPTUNES-M2.5x8 HEX BOLT
2 NEPTUNES-M2.5x11 HEX BOLT
4 NEPTUNES-M2.5x20 STUD
12 NEPTUNES-M2.5x26 STUD
8 NEPTUNES-M2x5 HEX BOLT
7 NEPTUNES-M3 BRASS WASHER
23 NEPTUNES-M3 NUT
2 NEPTUNES-M3x7 GRUB SREW
12 NEPTUNES-M3x8 HEX BOLT
38 NEPTUNES-M3x11 HEX BOLT
31 NEPTUNES-M3x12 C-SINK SCREW
2 NEPTUNES-M4 DOME NUT
6 NEPTUNES-M4x12 HEX BOLT
4 NEPTUNES-M5x12 C-SINK SCREW
4 NEPTUNES-M5x15 HEX BOLT
QTY. PART NUMBER
1 STMPLANT-03-01-PLANT BASE
1 STMPLANT-03-02-FD WTR TANK
2 STMPLANT-03-04-FD WTR TANK SCREW NIPPLE
1 STMPLANT-03-05-FD WTR TANK PLUG NUT
1 STMPLANT-03-06-COND VESSEL
3 STMPLANT-03-07-COND VESSEL MOUNTING FOOT
1 STMPLANT-03-08A-COND VESSEL EXHAUST STEAM PIPE
1 STMPLANT-03-08B-COND VESSEL OVERFLOW PIPE
1 STMPLANT-03-09-COND EXHAUST STEAM PIPE
3 STMPLANT-03-10-M10x6 PIPE NUT
5 STMPLANT-03-11-M8x6 PIPE NUT
1 STMPLANT-03-12-FEED PUMP BODY
1 STMPLANT-03-13-FEED PUMP BODY SPACER
1 STMPLANT-03-14-FEED PUMP CYLINDER
1 STMPLANT-03-15-FD PMP M10x7.5 PISTON NUT
1 STMPLANT-03-16-FEED PUMP OUTLET NIPPLE
2 STMPLANT-03-17-FEED PUMP BALL VALVE
1 STMPLANT-03-18-FEED PUMP INLET PIPE
1 STMPLANT-03-19-FEED PUMP PISTON
1 STMPLANT-03-20-FEED PUMP ECCENTRIC STRAP
1 STMPLANT-03-21-PRE-HEATER VESSEL
1 STMPLANT-03-22-PRE-HEATER VESSEL TOP+BOTTOM
1 STMPLANT-03-22-PRE-HEATER VESSEL TOP+BOTTOM
4 STMPLANT-03-23-PRE-HEATER INTERNAL TUBING
2 STMPLANT-03-24-M8x6 CONNECTOR
1 STMPLANT-03-25-BY-PASS VALVE BODY
1 STMPLANT-03-26-BY-PASS VALVE SPINDLE
1 STMPLANT-03-27-BY-PASS VALVE HAND WHEEL
1 STMPLANT-03-28-BY-PASS VALVE RETURN PIPE
2 STMPLANT-03-29-FIRE BOX SIDE PLATE
1 STMPLANT-03-30-FIRE BOX FRONT PLATE
1 STMPLANT-03-31-FIRE BOX REAR PLATE
1 STMPLANT-03-32-FIRE BOX FIRE DOOR
1 STMPLANT-03-33-FIRE BOX FIRE DOOR HINGE
1 STMPLANT-03-34-FIRE BOX FIRE DOOR CATCH
1 STMPLANT-03-35A-SMOKE BOX SIDE COVER
1 STMPLANT-03-35B-SMOKE BOX SIDE COVER
1 STMPLANT-03-36-SMOKE BOX FRONT COVER
1 STMPLANT-03-37-SMOKE BOX REAR COVER
1 STMPLANT-03-38-CHIMNEY BASE
1 STMPLANT-03-39-BOILER SHELL
5 STMPLANT-03-40-NIPPLE M10x14x18
2 STMPLANT-03-41-WTR LVL IND BOILER NIPPLE
QTY. PART NUMBER
1 STMPLANT-03-42-BOILER STEAM DOME
1 STMPLANT-03-43-BOILER WATER TUBES
1 STMPLANT-03-44-FIRE REFLECTOR BAFFLE
1 STMPLANT-03-45-DOME MAIN STEAM VALVE BODY
1 STMPLANT-03-46-DOME MAIN STEAM VALVE SPINDLE GUIDE
1 STMPLANT-03-47-DOME MAIN STEAM VALVE SPINDLE
1 STMPLANT-03-48-M8x3 SPINDLE NUT
4 STMPLANT-03-49-M8x5 PIPE NUT
1 STMPLANT-03-50-PRESSURE GAUGE
1 STMPLANT-03-51-PRESSURE GAUGE PIPE
1 STMPLANT-03-52-PRESSURE GAUGE NIPPLE REDUCER
1 STMPLANT-03-53-MAIN SUPPLY PIPE-1
1 STMPLANT-03-54-MAIN SUPPLY PIPE-2
1 STMPLANT-03-55-PRE-HEATER EXHAUST PIPE
1 STMPLANT-03-56-CHECK VALVE BODY
1 STMPLANT-03-57-CHECK VALVE BALL VALVE
1 STMPLANT-03-58-CHECK VALVE SCREW TOP
1 STMPLANT-03-59-CHECK VALVE PIPIE
1 STMPLANT-03-60-BOILER INSULATION
1 STMPLANT-03-61-DOME INSULATION
1 STMPLANT-03-62-BOILER OUTER CLADDING
1 STMPLANT-03-63-DOME OUTER CLADDING
1 STMPLANT-03-64-WHISTLE BASE
1 STMPLANT-03-65-WHISTLE CONTROL VALVE
1 STMPLANT-03-66-WHISTLE CONTROL VALVE SPRING
1 STMPLANT-03-67-SAFETY VALVE BODY
1 STMPLANT-03-68-SAFETY VALVE GUIDE BLOCK
1 STMPLANT-03-68-SAFETY VALVE GUIDE BLOCK
1 STMPLANT-03-69-SAFETY VALVE BALL VALVE
1 STMPLANT-03-70-SAFETY VALVE PRESSURE STEM
1 STMPLANT-03-71A-SAFETY VALVE PRESSURE ARM
1 STMPLANT-03-71B-SAFETY VALVE PRESSURE WEIGHT
1 STMPLANT-03-72-WTR LVL IND TOP BODY
1 STMPLANT-03-73-WTR LVL IND BOTTOM BODY
2 STMPLANT-03-74-WTR LVL IND GLASS NUT
1 STMPLANT-03-75-WTR LVL IND GLASS TUBE
1 STMPLANT-03-76-WTR LVL IND DISCHARGE SPINDLE
2 STMPLANT-03-77-WTR LVL IND M10x7 NUT
1 STMPLANT-03-78-WTR LVL IND HAND WHEEL
1 STMPLANT-03-79-WTR LVL IND TOP PLUG
1 STMPLANT-03-80-WTR LVL IND DISCHARGE PIPE
2 STMPLANT-M2.5 NUT
2 STMPLANT-M2.5x7 C-SINK SCREW
1 STMPLANT-M3 BRASS WASHER
10 STMPLANT-M3 NUT
3 STMPLANT-M3x5+2.5x3 GRUB SCREW
4 STMPLANT-M3x5 HEX BOLT
3 STMPLANT-M3x12 HEX BOLT
1 STMPLANT-M3x18 HEX BOLT
1 STMPLANT-M4 BRASS WASHER
80 STMPLANT-M4 NUT
12 STMPLANT-M4x6 HEX BOLT
54 STMPLANT-M4x10 HEX BOLT
9 STMPLANT-M4x12 HEX BOLT
16 STMPLANT-M4x15 HEX BOLT
2 STMPLANT-M4x15 RH WOOD SCREW
9 STMPLANT-M5 NUT
4 STMPLANT-M5x12 HEX BOLT
20 STMPLANT-M8x20 CSK WOOD SCREW
J.A.M. DE WAAL PAPAKURA NZ
PROJECT No 09C-16-00 PROJECTION
A3
Copyright ©
TITLE
DWG SCALE: NTS @A3 OR AS SHOWN
DRAWING CONTENTS MODEL SCALE: 1:1
J.A.M. DE WAAL. 12 BRIGHTWELL STREET PAPAKURA 2110.
NEW ZEALAND. PHONE: OO64 09 2988815. MOB: 0211791000
E-MAIL: dewaal@xtra.co.nz.
JDW DRAUGHTING SERVICES
NOTES: THIS STEAM PLANT IS BASED ON DRAWINGS AND ARTICLES WHICH APPEARED IN THE "MODELBOUWER" OF 1973
DATE
No: STMINST-03SHEET: 03 OF 12
DECEMBER-2015BILL OF MATERIALSCOMPLETE STEAM PLANT INCLUDING TWO
STEAM ENGINES (1CYL + 2CYL VERTICAL)
JDWDS
Hotline: 033 666 2767
Kênh Youtube: Học Cơ Khí
Facebook: https://www.facebook.com/HocCoKhi
Website: www.hoccokhi.vn www.cokhi.org
Email: hoccokhi.info@gmail.com
shared
by
hoccokhi.vn
Tải nhiều tài liệu và video tự học miễn phí tại www.cokhi.org

4. MS/ALU
7.57.57.511.59.533217.5
15.3
37.5
7.57.530
R2
7.57.5 7.5 15 7.5
22.545
1756
12
(105)(90)
4.5 4PL
M4 6PL
4
55
R7.5
M3 R2
5
CKS
CB CB
CB
5
15
5
12 9 12
M3
R1.5
SCALE 1:1.5
M5
813516314
M5
(127)
M3M3
8
SCALE 1:2
MS/ALU
MS/ALU
M4
7
22
12111.514
M4
127
6
SCALE 1:2
BRZ
MS/ALU
9RM
11.5 11.5
3666
12
21 21
44
5.5 5.5
M3x6DPM3x6DP
3
66
8.5 8.5
16.5 16.5
41.534
MS
99
4.5 7.5 30 7.5 4.5
21
22
30
21
22
30
25.525.5
3 4PL M3 6PL
6mm THICK SCALE 1:1.5
TIGHT FIT
DRILL AFTER
ASSEMBLY
MS3
6
82222
33PL
60
3mm THICK
SCALE 1:2
38
82222
60
33PL
MS
BRS
3.5
3.5
A
A SCALE 1:1.5
2.52.5
45°
45°
1.51.5
27
4414
R1
SECTION A-A
SCALE 1 : 1.5
39
22RM
M3 4PL
32PCD
45° OPPOSITE
FACE EQUAL
BRS
39
3 4PL
32PCD
1.5
4.53
4.5
15
21
22
9
SCALE 1:1.5
BRZBRS
22.5 22.5
R6 R6
3326
R6
4
5
3
R3 R3
1212
12
7PF
43
32PCD
TAKE OVER
FROM 1-08
M10
15
22
5RM
6
4.5
4.5
1.5 SCALE 1:1.5
SYN
BRZ
83
14HEX
M10
9
3.5
5RM SEAL
BRS
BRS
4.5
M6x6DP
20.520.5
9
15.315.3
3
R13.5
3.53.5
1212
27
20
99
3.53.5
1515
334.53312.25
M2.5x5DP 6PL
BRS
6 6
9 9
12 12
15155.55.56
1616
3RM
M6
11
2.5 6PL
M5
7.5 7.5
14.5
M66
S/S
1212
20.520.5
2.5
REFER TO 1-12 FOR
ALL OTHER
DIMENSION DETAILS
0.5mm THICK
SYN
BRZ
3
5.5
M6
63
3
9HEX
SEAL
1212
20.520.5
2.5
3mm THICK
SCALE 1:1.5
TAKE
OVER
FROM
1-13
BRS
2RM
M54
2.5
SR2.5
16.5
7HEX
R1.5
19
BRS
M8
3
11
9
5
M8
6
8
3
6
M6
5.5
M10
9
3.5
66
6 6
66
SYN
SYN
BRS
3
7.5
M8
1 7.5 3
0.5
6
M6
11HEX
12
SEAL
SEAL
BRS
SYN
3
M6
M4
M10
13HEX
0.5
6
7.5
7.5
6
SEAL
S/S
5 10 9 20
7
M3
3M4
5
MS/BRS
18
5
M3
2R1.5
3
BRS
SYN
4.5
6
3
8HEX
M6
0.5
SEAL
BRS
BRS
BRS
BRS
CU
404.52.5
12.57.518
B
B
15
3
M6
9
8
8
3
M10
4.5
7
M6
9
6
8
6
3
12.5
2.5
2.55
M6
9
7.5
12.5
2.5
3
4.5
7
SECTION B-B
SOLDER
SOLDER
SOLDER
BRS
SYN
3
8HEX
4.5
6
0.5
M6
SEAL
MS/BRS
15
M3
REFER
TO 1-22
S/S
8
15
22
4
M4
11
3
M3
S/S
4 7 9
3 3
4
M6
9
18
2
PRESS FIT
CU
R3.5
60° 6
12
TUBE 3x2
BRS
SYN
8
1
18
12HEX
2.5
6
M10
SLOT2x2
SEAL
SCALE 1:1.5
S/S
S/S
S/S
M/S
M/S
439
9
12 12
4
9
10
9
7.57.5
60°
7PF 7PF
7PF
7PF
81
33 MAX
17
MS
67.5
81
90
7.5
C
C
6 SPOKES
EQUALLY
SPACED
SCALE 1:2
18
21
8 8
9
22
M3M3
30°
SECTION C-C
SCALE 1 : 2
MS
41.5
1.5
3
6
15
9
25
28
4.5
M2.5
SCALE 1:1.5
M5
7
13
3
5
66
1111
4.5
8.5 7 8.5
7
SCALE 1:1.5
BRS
S/S
M3
1261.3
8
5
M5
SCALE 1:2
BRZ
SYN
M3
22
22.2
18
2.5
4.5
2.5
MS
BRS
TWO HALVE
BEARINGS AFTER
ASSEMBLY
SHOULD BE A
TIGHT FIT AND
REAMED AFTER
88
4
8 8
1111
74
4.5
2
30°
2
30°
9RM
12
1551
10
DRILL OIL
HOLES
AFTER
ASSEMBLY
SCALE 1:1.5
3.53.5 7
R4.5 R3.5
14
7
2.5
5 5
6.5 6.5
S/S
3 14 4
8
4.5
M3
66
17
29
1-01
1-02
1-03
1-05
1-05
1-06 1-07
1-08
1-09
1-10
1-11
1-12
1-13
1-14
1-15
1-16
1-17
1-18
1-19
1-20
1-21
1-22
1-23
1-24
1-25
1-26
1-27
1-28
1-29
1-30
1-31
1-32
1-33
1-34
1-35
1-36
1-37
1-38
J.A.M. DE WAAL PAPAKURA NZ
PROJECT No 09C-16-00 PROJECTION
A3
Copyright ©
TITLE
DWG SCALE: 1:1 @A3 OR AS SHOWN
DRAWING CONTENTS MODEL SCALE: 1:1
J.A.M. DE WAAL. 12 BRIGHTWELL STREET PAPAKURA 2110.
NEW ZEALAND. PHONE: OO64 09 2988815. MOB: 0211791000
E-MAIL: dewaal@xtra.co.nz.
JDW DRAUGHTING SERVICES
NOTES: THIS STEAM PLANT IS BASED ON DRAWINGS AND ARTICLES WHICH APPEARED IN THE "MODELBOUWER" OF 1973
DATE
No: STMINST-04SHEET: 04 OF 12
DECEMBER-2015
PARTS AND ASSEMBLIES OF
"HERCULES"
COMPLETE STEAM PLANT INCLUDING TWO
STEAM ENGINES (1CYL + 2CYL VERTICAL)
JDWDS
Hotline: 033 666 2767
Kênh Youtube: Học Cơ Khí
Facebook: https://www.facebook.com/HocCoKhi
Website: www.hoccokhi.vn www.cokhi.org
Email: hoccokhi.info@gmail.com
shared
by
hoccokhi.vn
Tải nhiều tài liệu và video tự học miễn phí tại www.cokhi.org

5. MS
MS
BRZ
8.58.5
10.5 10.5
22.5 22.5
33
2
2
45°45°
36
25RM
28
DRILL OIL
HOLES AFTER
ASSEMBLY
REAM AFTER
ASSEMBLY
2.52.5 M2.5 M2.5
66
2020
33
MS
R3
4
33
8 8
65
53
=3=
4
M3
3
2.5 2.5
9
10.64.4
5
2.5
6 6
2.52.5
SCALE 1:1.5
BRZ
7.5
12
6
11.5
3
14.5
5
2.52.5
7.5
1.5 1.5
3
4.5104.5
27.52
3 3
33
M3
5mm THICK
S/S
2
1853.5
159
M3
3
M3
SCALE 1:1.5
MS
M3
6
8
6
1.5
4.5
4
R3
=3=
8
MS
9
22
25
37
16
30
1
5
1 9
5 9
4
M3
SCALE 1:1.5
BSR
144.512
12 23
4.3
13
21.5
9
5 M2.5 PLSCALE 1:1.5 7.5
9
3
7.57.5
3
4.5
5.5
9
BRS
6.56.5
2.5
6
12
4.5
14
10.810.8
SCALE 1:1.5
7.84.5
9
5
20
MS
BRS
5
M2.5
3
2.5
3 6.5
1.5
10.5
3
25.54.5
5
6
SCALE 1:1.5
3
4.5 4.5
R4.5
MS
2
2PF
9
5
7.5
M3
4.5
5.5
1.5PF
11
73
5.5
9239.5
PRESS FIT
AFTER
ASSEMBLY
PRESS FIT
AFTER
ASSEMBLY
SCALE 1:1.5
BRS
2.5
4.8
45°
4.5
10
15.5
1.5
1.5
0.5
20 TEETHS
MS
4.5
2PF 1.5PF
11
11.5
4.5 19.5 6
PRESS FIT
AFTER
ASSEMBLY
BRS
2
5
4
1.51.5
4.5
12
15
BRS
0.5
1
42
S7.5
7.5
2
13
2
R2
R2
BRS
MS
MS
5
9
11
1.5
4.5
1.5
4
4.54.5R2 R2
2PF
7
2
22
5
12.5
BRS
MS
2
R2
R2
2
10.7
15
4.5
2.5
135°
=2=
1
11
2PF
4
BRS
MS
MS
MS
R2.5
2.5PF 3
5
22 22
2.5PF
R2.5
3
3
2
7.511
2.52.5
R7
1.5
4.5
4.5
=1.5=
4
=1.5=
19.5
2
1.51.5
6
7
9
SYN61
R11
0.8
R6
BRS
7.57.5
D
D
M5
3
4
1.5
2.5
SECTION D-D
45°
45°
M2
8
19
15CD
S/S
1.5
M2.5
5
2.5
6.5
22
S/S
3
R8.5
R8.5SCALE 2:1
1.5
8
M2.5
BRS
5
M8
45° 45°
6
R9.5
R5
15
2
15PCD
FF
274
10
3.52
SECTION F-F
BRS
2.5
M5
9
BRS
SYN
2.5
4.5
6
0.5
7HEX
M5
SEAL
BRS SYN
5
M8
5.5
7
0.5
SEAL BRS
MS
11
2.5 2.5PF
R2.5
R2.5
3
M2
2
11
5
6.5
BRS
131265.2
212.6
SCALE 1:1.5
2.5 R2.5
85
2.5
R2.5
3
CU
38.5
44.5
R12.5
TUBE 5x4
MS
4.5
15
9
15
24
21
1
1.8 1.8
2.5
6
3
M2.5
BRS
6
M6
1.5
1
BRS
4.5
M6
6 9
6
6
M8
SYNBRS
6
12HEX
7
9
M8
1
SEAL
53.5
R7
R7
31.331.3 42.8
TUBE 6x5
SCALE 1:2
CU
S/S
M3
4
2.5 5.5 5
5
6
1-05
1-06
1-06
1-07
1-07
SA-1-101
1-15
1-11
1-10
1-08
1-09
1-12
1-17
1-13
1-16
1-19
1-14 1-68
1-69
1-70
1-67
1-67
SA-1-102
1-18
1-62 1-20 1-22
1-21
SA-1-103
1-26 1-27
1-25
1-30
1-24
1-29
1-28
SA-1-104
SA-1-102
SA-1-104
SA-1-103
SA-1-105
1-01
1-04
1-04
1-04
1-03
1-021-02
SA-1-101
SA-1-107
SA-1-108
SA-1-107
SA-1-105
SA-1-118
19
1-45
1-31 1-33 1-66
1-32SA-1-110
1-34
1-35
1-36
SA-1-111
1-71
1-40
1-39
SA-1-112
1-42
1-41
1-43
1-44
44.5
SA-1-113
1-54
1-47
1-46
1-48A
SA-1-114SA-1-116
SA-1-115
1-51
1-52
1-51
1-48B
1-49A
1-53
1-53
SA-1-115
1-49A
1-49B
1-50
SA-1-116
1-58
1-57
1-63
SA-1-117
1-65
1-39
1-40
1-41
1-42
1-43
1-44
1-45
1-46
1-47
1-48A
1-48B
1-49A
1-49B
1-50
1-51
1-52
1-53
1-54
1-55
1-56
1-57
1-58
1-59
1-60
1-61
1-62
1-64
1-65
1-66
1-67
1-68
1-69
1-70
1-71
J.A.M. DE WAAL PAPAKURA NZ
PROJECT No 09C-16-00 PROJECTION
A3
Copyright ©
TITLE
DWG SCALE: 1:1 @A3 OR AS SHOWN
DRAWING CONTENTS MODEL SCALE: 1:1
J.A.M. DE WAAL. 12 BRIGHTWELL STREET PAPAKURA 2110.
NEW ZEALAND. PHONE: OO64 09 2988815. MOB: 0211791000
E-MAIL: dewaal@xtra.co.nz.
JDW DRAUGHTING SERVICES
NOTES: THIS STEAM PLANT IS BASED ON DRAWINGS AND ARTICLES WHICH APPEARED IN THE "MODELBOUWER" OF 1973
DATE
No: STMINST-05SHEET: 05 OF 12
DECEMBER-2015
PARTS AND ASSEMBLIES OF
"HERCULES"
COMPLETE STEAM PLANT INCLUDING TWO
STEAM ENGINES (1CYL + 2CYL VERTICAL)
JDWDS
Hotline: 033 666 2767
Kênh Youtube: Học Cơ Khí
Facebook: https://www.facebook.com/HocCoKhi
Website: www.hoccokhi.vn www.cokhi.org
Email: hoccokhi.info@gmail.com
shared
by
hoccokhi.vn
Tải nhiều tài liệu và video tự học miễn phí tại www.cokhi.org

6. 1-62
1-59
1-59
1-56
1-62
1-61
1-60
SA-1-118
SA-1-108
SA-1-110
SA-1-114
SA-1-112
SA-1-113
SA-1-111
1-64
1-55
1-37
1-38
SA-1-117
SA-1-120
MS/ALU
422
3 C'SINK ALL HOLES IN BOTTOM PLATE
SCALE 1:2
2525
35
45
35
45
3 6
3
319.519.53
3
2020 3535
60 60
82.5 82.5
40.540.5
5 4PL
M3 16PL
5
3
3
3
6
6
3
6
MS/ALU
9 99999
22.522.5
13.513.5 13.513.5
10
5
10
10
43.5 43.5
32
16.5
22.5
25
16.5
22.5
25
32
3535
20 203521.5 35 21.5
(159)
8829717 29 7 17
2828
22.5
40.540.5
3 16PL
M4 6PL
4 2PL
R3
CSK
6mm THICK SCALE 1:2
M4
6
669559
2.5
M4
SCALE 1:2
MS
MS/ALU
M5
7.5
11
176
1537
113.5
15
15
9
9
M5
9
58
5
99
5.5 3
CSK
13.513.5
4.55154
13.513.5
4.5
4.5
6
M34PL
SCALE 1:2
4.5 3.5
8.5
99
3
5
REFER TO 1-05
CENTER BEARING BLOCK TO HAVE
SPLIT BRONZE BEARING SHELLS
228228
123 12 3
3
3
M36PL
CSK
6mm THICK
SCALE 1:1.5
REFER
TO 1-06
REFER
TO 1-07
MS/ALU
13.5
22.5 22.5
13.5
3636
4.54.5
40.5 40.5
R4
R4
33
21
22.5
9 9 9.5999.5
18 18
3 12PL
4
4
2.5 4PL
44.544.5
45°45° 45° 45°
32PCD
3mm THICK SCALE 1:1.5
BRS
6
3
R4
4.5
10.5 10.5
7.57.5
33
3 3
BRS
4.52.5 2.5
40.5 40.5
3.5
7
SCALE 1:2
6 6
40.5 40.5
4.5
9
9 9
=5=
BRS
R4
R9
3
85
SCALE 1:1.5
4.54.5
3
6
7.57.5
3
12
=3=
2.5
8
REFER TO 1-08
BRS
REFER
TO 1-09
BRS
BRZ
39
22
45°45°
3
32PCD
M10
15
5RM
7PF
6
4.54.5
1.5
SCALE 1:1.5
REFER TO 1-11
4
1212
M2M2
R13.5
23
16
SCALE 1:1.5
REFER TO 1-12
77
REFER TO 1-13
SCALE 1:1.5
SCALE 1:1.5
REFER TO 1-14
REFER
TO 1-15
REFER TO 1-16
REFER
TO 1-17
REFER TO 1-16
1247.5107.5464 47.5 10 7.54 64
REFER TO 1-31 SCALE 1:2
90°
17
17
MS
9
17
62
78
18
40PCD
G
G
6 HOLES
EQUALLY
SPACED
ON PCD
20
6 6
60°
M3
SECTION G-G
SCALE 1 : 2
REFER
TO 1-33
REFER TO 1-34
REFER
TO 1-35
REFER
TO 1-36
REFER
TO 1-37REFER TO 1-38
REFER TO 1-39
R3
53
3
33
8 8
4
12
MS
5
=3=
3 4 1.5
4
3
12
5.5
9
6 6
2.5
5
REFER
TO 1-41
REFER
TO 1-42
62.818
REFER
TO 1-43
BRS
S/S
3 3
3PF
R3
9
4 4
M3
9
=4=
8.5
252
R2.5
R3
R4.5R4.5
3
11
15.4
R3
4
2.6
6.2
1717
1919
1111
R89.5
4mm THICK
SCALE 1:5
R3
MS
BRZ
3
5
8R82.5
M3
4.5
3 6 4
M4
30
80.5
1.5
594
SCALE 1:5
MS
2-01
2-02
2-03
2-04
2-05
2-06
2-07
2-08
2-09
2-10
2-11
2-1
2-13
2-14
2-15
2-16
2-17
2-18
2-19
2-20
2-21
2-22
2-23
2-24
2-25
2-26
2-27
2-28
2-29
2-30
2-31
2-32
2-33
2-34
2-35
2-36
2-37
2-38
2-39 2-40
J.A.M. DE WAAL PAPAKURA NZ
PROJECT No 09C-16-00 PROJECTION
A3
Copyright ©
TITLE
DWG SCALE: 1:1 @A3 OR AS SHOWN
DRAWING CONTENTS MODEL SCALE: 1:1
J.A.M. DE WAAL. 12 BRIGHTWELL STREET PAPAKURA 2110.
NEW ZEALAND. PHONE: OO64 09 2988815. MOB: 0211791000
E-MAIL: dewaal@xtra.co.nz.
JDW DRAUGHTING SERVICES
NOTES: THIS STEAM PLANT IS BASED ON DRAWINGS AND ARTICLES WHICH APPEARED IN THE "MODELBOUWER" OF 1973
DATE
No: STMINST-06SHEET: 06 OF 12
DECEMBER-2015
PARTS AND ASSEMBLIES OF
"HERCULES" AND "NEPTUNES"
COMPLETE STEAM PLANT INCLUDING TWO
STEAM ENGINES (1CYL + 2CYL VERTICAL)
JDWDS
Hotline: 033 666 2767
Kênh Youtube: Học Cơ Khí
Facebook: https://www.facebook.com/HocCoKhi
Website: www.hoccokhi.vn www.cokhi.org
Email: hoccokhi.info@gmail.com
shared
by
hoccokhi.vn
Tải nhiều tài liệu và video tự học miễn phí tại www.cokhi.org

7. BRS
38
20
27 A
A
4
6
3
R1.5
SR2.5
2.4
12.5
SECTION A-A
BRZ
3 3.5 3
7
3.5
7
3
M4
3.5
7
MS
53 53
2PF 2PF
3.53.5
4.5
9
9
PRESS FIT AFTER ASSEMBLYSCALE 1:1.5
2PF
10
4.5
MS
21
R4
R3.5
4.5
3
2PF
8
SCALE 1:1.5
7 1.5
5 5
3
68
4.5
34
5
3
SCALE 1:1.5
4
3
4
2PF
MS
3
6
3
6
75
4
SCALE 1:1.5
5
2.5
5
BRS
40 40
41.5 41.5
1212
1212
20.520.5
20.520.511.58.5
8
8
SCALE 1:1.5
R19.5
R19.5
0.7
45
7.5
45
R20.2
R20.2
0.7 SOLDER TOP LID
LIGHT PUSH FIT
12
SCALE 1:2
BRS
5
M8
6 68
6
M10
9
6
4
66
M6
8
6
5
8
4
6
9
5
8
9
4
3.5
5.5x18DP
66
REFER
TO 1-20
REFER TO 1-21
REFER
TO 1-22
REFER
TO 1-23
30.5
46.5
R12.5
TUBE 5x4
SCALE 1:1.5
REFER
TO 1-62
REFER TO 1-24
REFER
TO 1-25 REFER
TO 1-26
REFER TO 1-27
REFER TO 1-28
REFER
TO 1-29
REFER TO 1-30
BRS
5
4.5
M6
11
M8
6
6
BRS SYN
M8
5
0.5
6.5
8
11HEX
SEAL
REFER
TO 1-67
CU
CU
BRS
4040
R7.5
R7.5
36
22.5
TUBE 5x4
SCALE 1:1.5
16
2.5
11PCD
S/S
M3
472.5
4
5
6
3.5
182
4.5HEX
M3
2-06
2-07
2-07
2-08
2-08
2-10
2-04
SA-2-201
2-14
2-13
2-15
2-16 2-19
2-17
2-22
2-18
2-20
2-21
SA-2-202A
2-23
2-23
SA-2-202B
2-09
2-03
2-032-05 2-05
2-05
2-11
2-01
2-02
2-12
2-12
SA-2-201
SA-2-201
SA-2-205
SA-2-205
SA-2-202A
SA-2-202B
SA-2-214
SA-2-206
2-48
2-47
SA-2-215
2 2
2-25
2-24
2-26
2-26
2-26 2-26SA-2-207
2-29
2-28
2-27
2-31
2-30
SA-2-209
2-67
2-33
2-32
SA-2-2102-36
2-35
2-34
2-37
SA-2-211
51.8
2-41
2-40
SA-2-212
SA-2-213
2-45
2-45
2-432-44
2-54
2-54
2-52
2-51
2-50
2-55
2-49
SA-2-214
2-58
2-59
2-57 2-62
2-56
2-61
2-60
SA-2-215
SA-2-206
SA-2-207
SA-2-210
SA-2-210
SA-2-210
SA-2-210
SA-2-213
SA-2-212
SA-2-209
SA-2-209
SA-2-211
SA-2-211
SA-2-208
SA-2-208
2-46
2-46
2-46
2-46 2-68
2-68
2-38
2-38
74.8
SA-2-208
2-41
2-42
2-43
2-44
2-45
2-46
2-47
2-48
2-49
2-50
2-51
2-52
2-53
2-54
2-55
2-56
2-57
2-58
2-59
2-60
2-61
2-62
2-63
2-64
2-65
2-67
2-68
J.A.M. DE WAAL PAPAKURA NZ
PROJECT No 09C-16-00 PROJECTION
A3
Copyright ©
TITLE
DWG SCALE: 1:1 @A3 OR AS SHOWN
DRAWING CONTENTS MODEL SCALE: 1:1
J.A.M. DE WAAL. 12 BRIGHTWELL STREET PAPAKURA 2110.
NEW ZEALAND. PHONE: OO64 09 2988815. MOB: 0211791000
E-MAIL: dewaal@xtra.co.nz.
JDW DRAUGHTING SERVICES
NOTES: THIS STEAM PLANT IS BASED ON DRAWINGS AND ARTICLES WHICH APPEARED IN THE "MODELBOUWER" OF 1973
DATE
No: STMINST-07SHEET: 07 OF 12
DECEMBER-2015
PARTS AND ASSEMBLIES OF
"NEPTUNES"
COMPLETE STEAM PLANT INCLUDING TWO
STEAM ENGINES (1CYL + 2CYL VERTICAL)
JDWDS
Hotline: 033 666 2767
Kênh Youtube: Học Cơ Khí
Facebook: https://www.facebook.com/HocCoKhi
Website: www.hoccokhi.vn www.cokhi.org
Email: hoccokhi.info@gmail.com
shared
by
hoccokhi.vn
Tải nhiều tài liệu và video tự học miễn phí tại www.cokhi.org

8. 80150208015020
68.590
67.5
13.525
37.5 37.5
40 40
20 165 165 165 165 20
75 75
18106
49.5
81
12083
143
3164.5
113.5
6026346060342660
919121.5
2626
22 40
35.5
70
149 192.5
54.5
86.5
36
(700)
8
(500)
60
19
4
6.5 4
4
5.5
44.5
5
3
30°30°
CSK
ALU/MS
606
4.5
37
TIMBER 40x60
SCALE 1:4
BRS
ALU
7575
18 101101
133
2
67
6
6
4
22
20
1515
5
6
SOLDER
4
83
4.5
11
75
88 13.5
82 30
20
3mm HALVE ROUND BEADING
MAKE TANK OUT OF 1mm PLATE
ANGLE 20x15
SOLDER
OTHER SIDESCALE 1:3
BRS
5
8
12
3 3 9
6
M10
7
BRS
SYN
4.5
6
8HEX
M6
0.5 SEAL
BRS
CU
BRS
R48.8
R48.8
52
26
19
36
1.5
12
15
8.5
30
150
53.5
TUBE 6x5
SOLDER
SOLDER
SCALE 1:2
11
9
12
6
30°
BRS
7
211.5
ANGLE
5.5x5.5x1
SOLDER
4.54.5
4.59
3
BRS
CU
6
M8
86
3
144
SOLDER
TUBE 9x7
SCALE 1:2
35
10
120°
TUBE 6x5
SCALE 1:2
CU
CU
BRS
345
33
16
TUBE 6x5
SOLDER
SCALE 1:2
2.5
45°45°
11PCD
BRS
SYN
7
9
6
13HEX
M10
1
SEAL
BRS
SYN
8
12HEX
6
7
9
1
SEAL
BRS
3
A
A
SOLDER
SCALE 1:1.5
M10
927
2727
M8
6
M10
10
5
7.5
4.511
12
SECTION A-A
SCALE 1 : 1.5
7.5 7.5
7.57.5
4.54.5
15.5 15.5
R4.5
BRS
4.5
7.5PF
9
BRS
12
3
5
M8
9
M10
7.5RM33
364.55
SCALE 1:1.5
BRS
SYN
9
12
7.5
15HEX
1
M10
SEAL
BRS
SYN
4
M8
97.51.57
1
1.5
3
2
6
M10
10HEX
15
SEAL
S/S
S 6
33.5
TUBE 6x5
S/S
SYN
57 4
6
7.5
7.7
3
3PF
8.5
10
PRESS FIT
AFTER
ASSEMBLY
BRS
24
60
3
R3
R3
3
6R3
M3 3PL
39
30
7
SCALE 1:1.5
6
3
=3=
10
BRS
CU
15
18
11
79
514
M8
6
55
6
M8
120°40
10
2
9
9
TUBE 4.5x3.5
SOLDER
SCALE 1:2
BOTTOM
COVER
BRS
4
M8
18
15
2.557.5
1.5
2
9
3
9PCD
TOP
COVER
BRS
7.57.5
85
TUBE 3x2
CU
M8
6
M8
6.36.3
0.50.5
12HEX
SEAL
SCALE 1:1.5 BRS
6
4
M8
9 6 12 12
M6
10
9
3
4.5
5
M8
9
S/S
6156.82.3
4.5
M6
M3
MS
R1.5
M3
5
2
18
CU
97.3
65.5
22.8
R7.3
TUBE
5.5x4.5
SCALE 1:4
3-30
ALU
ALU
606030.5 30.5
97.597.5
12.545504017.5
R78
87
52.552.5
60 60
12
23
77.5
SCALE 1:4
3-30ALL 4
2
3
BRS
12
2.5
2.5
2.57
R2.5
1844
36.5
3-01
3-02
3-04
3-05
3-06
3-07
3-08A
3-08B
3-09
3-10
3-11
3-12
3-13
3-14
3-15
3-16
3-17
3-18
3-19
3-20
3-21
3-22
3-22
3-23
3-24
3-25
3-26
3-27
3-28
3-33
J.A.M. DE WAAL PAPAKURA NZ
PROJECT No 09C-16-00 PROJECTION
A3
Copyright ©
TITLE
DWG SCALE: 1:1 @A3 OR AS SHOWN
DRAWING CONTENTS MODEL SCALE: 1:1
J.A.M. DE WAAL. 12 BRIGHTWELL STREET PAPAKURA 2110.
NEW ZEALAND. PHONE: OO64 09 2988815. MOB: 0211791000
E-MAIL: dewaal@xtra.co.nz.
JDW DRAUGHTING SERVICES
NOTES: THIS STEAM PLANT IS BASED ON DRAWINGS AND ARTICLES WHICH APPEARED IN THE "MODELBOUWER" OF 1973
DATE
No: STMINST-08SHEET: 08 OF 12
DECEMBER-2015
PARTS AND ASSEMBLIES OF
"STEAM PLANT"
COMPLETE STEAM PLANT INCLUDING TWO
STEAM ENGINES (1CYL + 2CYL VERTICAL)
JDWDS
Hotline: 033 666 2767
Kênh Youtube: Học Cơ Khí
Facebook: https://www.facebook.com/HocCoKhi
Website: www.hoccokhi.vn www.cokhi.org
Email: hoccokhi.info@gmail.com
shared
by
hoccokhi.vn
Tải nhiều tài liệu và video tự học miễn phí tại www.cokhi.org

9. ALU
4540
60 60 60 60 60 60
186186
189 189
2525
80.580.51111
184 184
30 30 60 606060
94 94
15
30°
FOLD LINE
M4
4 17PL
FOLD UP
FOLD UPFOLD UP
FOLD UP
2mm THICK SCALE 1:4
FLAT PATTERN
3-29
R78
3030
42 38.5
1537
27.512
2.5
165
195
REFER TO 3-30 FOR
OTHER DIMENSION DETAILS
2mm THICK SCALE 1:4
ALU
BRS
MS
13
7
30
33 16 6
4
3 4PL
131366
1616
6
3
413
SCALE 1:2
30
5M3 M3M4
4
1.5
6
2
4.5
14
R1
14.2
1.6
2.5
4 7
66
6
M4
4mm THICK
ALU
46 14.514.5
109.5 36 10 9.5
17.51045451010451017.5
6.8
10
30
10
45
1530303023
4.5
9.5
4.5
10801022.5
22.5555555
40
6
8
3.5
3.5
22
255
45°
8 AA
A
B
A
A
B
A
A
A
B
ALL 4
SCALE 1:2.5
LIP "A" FOLD UP
LIP "B" FOLD DOWN
FLAT PATTERN
1.5mm THICK
ALU
3-35B
MIRROR IMAGE
OF 3-35A
8686
80 80
51
37
44PL
362.4
60PCD
FOLD LINE
FOLD LINE
TAKE OVER FROM
3-30 AFTER
FOLDING
ALL UNDIMENSIONED
HOLES TO BE
TAKEN FROM 3-35A
AND 3-35B AFTER
FOLDING
FLAT PATTERN
1.5mm THICK
SCALE 1:4
ALU
1.5
75
135°
45°
210
45
10.5
10.5
10.5
R78
22.545 22.5 45
7373
6
6
129
187
TAKE OVER FROM 3-36
TAKE OVER
FROM 3-35A
AND/OR 3-35B
FOLD UP
SCALE 1:4
FLAT PATTERN
1.5mm THICK
BRS
CU
ALU
70
450
48
50
53
50
19127
10
6
R9
53
25.5
TUBE 6x5
SOLDER
4
60PCD
TAKE OVER
FROM 3-36
SCALE 1:3
CU
BRZ
BRZ
126 126
194 194
14 52 14
R180
27.6
R180
27.6
427.2
HARD/SILVER SOLDERED
128128
15301530
9
9191
39 38 60 60 60 60 60 6
ANGLE 17.5x12
SCALE 1:4
17.5 17.5
4545
33
14
1010
BRZ
M10
18
510
14
SCALE 1:1.5
BRZ
7
M10
10
5
9
20
10
CU
69
6015
R35
40
14
14
75
72
5
SOLDER
R78
SCALE 1:3
CU
R75
30 30 30
51.7
TUBE 9x7
R8.5
R8.5
256
51.7
38.2
SCALE 1:3
HEAT REFLECTIVE
MATERIAL
ALU
3
60°
64
14
6
SCALE 1:3
91914.54.5
4
5
BRS
SYN
17
18
611
1
99
B
B
7.5
M10
4
5
M8
4
5
M8
5
M10
8 8
1010
20
SECTION B-B
SCALE 1 : 1.5
BRS
3
M8
14HEX
8
12
8
16
M5
M10
1
SEAL
BRS
S/S
3-47
M3
3
M5
6
3915
22
7
27
3
5
3-47
SCALE 1:1.5
6
18
11PCD
BRS
SYN
3
M8
7
9
1
12HEX
SEAL
SYN
BRS
5
7
9
12HEX
M8
1
SEAL
9.5
M8
5
0-9BAR
PROPRIETY
ITEM
CU
R7.5
R7.5
15
42.5
20
TUBE 5x4
SCALE 1:1.5
BRS
SYN
4
M10
M8
5
14
7 3 9 6 6
BRS
SYN
M8
14
710
20
6
M10
14
4
911
6
M8
8
4
SEAL
SCALE 1:1.5
S/S
S 5.5
3-31
3-32
3-34
3-35A
3-36
3-37
3-38
3-39
3-40
3-41
3-42
3-43
3-44
3-45
3-46 3-48
3-49
3-50
3-51
3-52 3-56
3-57
J.A.M. DE WAAL PAPAKURA NZ
PROJECT No 09C-16-00 PROJECTION
A3
Copyright ©
TITLE
DWG SCALE: 1:1 @A3 OR AS SHOWN
DRAWING CONTENTS MODEL SCALE: 1:1
J.A.M. DE WAAL. 12 BRIGHTWELL STREET PAPAKURA 2110.
NEW ZEALAND. PHONE: OO64 09 2988815. MOB: 0211791000
E-MAIL: dewaal@xtra.co.nz.
JDW DRAUGHTING SERVICES
NOTES: THIS STEAM PLANT IS BASED ON DRAWINGS AND ARTICLES WHICH APPEARED IN THE "MODELBOUWER" OF 1973
DATE
No: STMINST-09SHEET: 09 OF 12
DECEMBER-2015
PARTS AND ASSEMBLIES OF
"STEAM PLANT"
COMPLETE STEAM PLANT INCLUDING TWO
STEAM ENGINES (1CYL + 2CYL VERTICAL)
JDWDS
Hotline: 033 666 2767
Kênh Youtube: Học Cơ Khí
Facebook: https://www.facebook.com/HocCoKhi
Website: www.hoccokhi.vn www.cokhi.org
Email: hoccokhi.info@gmail.com
shared
by
hoccokhi.vn
Tải nhiều tài liệu và video tự học miễn phí tại www.cokhi.org

10. CU
TUBE 5x4
90
27.5121
139.5
19.5
160.5
TUBE 5x4
SCALE 1:5
CU
160.5
90 21
73
22.5
TUBE 5x4
SCALE 1:5
27.5
90
369.5
234.5
51.5
SCALE 1:5
CU
188
26
51.5 BRS
SYN
9
14
62
1
7.54.5
2.5
M8
SEAL
SCALE 1:5
186
R27
48
152
TUBE 5x4
7.6
349
SHAPE AND FORM TO COVER
TOP HALVE OF BOILER
SCALE 1:5
SHAPE AND
FORM TO COVER
STEAM DOME
SCALE 1:5
349.7
81.2
SHAPE AND FORM TO COVER
INSULATION MATERIAL ON
TOP OF BOILER
SCALE 1:5
9191
95.595.5
TAKE OVER ALL HOLES FROM 3-39
8
RIM AT ONE
END ONLY
3-63
SHAPE AND FORM TO
COVER INSULATION
MATERIAL ON TOP OF
STEAM DOME.
SOLDER TO 3-62
3-63
BRS
50
7.56.57
16
4
216
6.5
R6.5
C
C
8
10
291
6
M10
7.5
4
10
2
10
2
1
SECTION C-C
SCALE 1 : 1.5
S/S
BRS
M4
4
7.5
5
1515
6
3
7
3
M3
R2 4
22
5R5
SPS
6.5
8 COILS
4.5
0.5
BRS
7.5
10
25
10
16
M10
86946
4.5
9 9
3
BRS
BRS
7414.54.5
2.5 2.5
10
M3
E
E
2.8
2
4
SECTION E-E
M3
7416.52.5
2.5 2.5
10
2
4
S/S
S 6
S/S
33.95.8
4.5
6
R3
BRS
90°
6
5
120
R1.5
30 15
2.5
67°
2.5
15
3.5
4.5
SCALE 1:1.5
MS
3
30
15
=4.5=
17.5
BRS
879
15
M10
F
F
5
7
8
9.5
1.5
9
M10
6810
6
7.5
SECTION F-F
187
13
5
FOR ALL OTHER
DIMENSION DETAILS
REFER TO 3-72
BRS
SYN
7
10
M10
13HEX
7.5
1
SEAL
GLASS
RUBBER
RUBBER
7.5
7.7
99
80
6
SCALE 1:1.5
S/S
32136
M4
6
M8
BRS SYN
7
9
7
13HEX
M10
1 SEAL
BRS
M4
5
15
22
10PCD
R2
2.5
SCALE 1:1.5
BRS
9
427
M10
14
SCALE 1:1.5
SEAL
SYN
CU
29.2
155
TUBE
5x4
SCALE 1:4
6
5°
12
95°
64.4
CU
54
56
9
6
1
60
84
3
26
78
TUBE 4x3
SCALE 1:2
BRS
4R4
8
66
26 26
R9
R9
20 20
SOLDER
TOGETHER
SCALE 1:2
BRS
252226
6 6
TUB 9x7
TUB 6x5
BRS
FILL WITH
WICK
MATERIAL
4
6
24
1
48
2112
SCALE 1:2
15
18
40
R10.5
6
4
4
SOLDER 4-03B
BRS
FILL WITH
WICK
MATERIAL
BRS
FILL INSIDE
WITH WICK
MATERIAL 132
3 316
14
TUBE
21x18
SOLDER ENDS
LIGHT
PUSH FIT
ONTO 4-03
SCALE 1:2.5
R6.5
R6.5
34
0.5
20x6=120
19x6=114
5
8 1.5 62 OFF
135 OUTSDE
137
60
6
LID TIGTH PUSH FIT
MAKE ALL FROM
1mm THICK PLATE
SCALE 1:3
BRS
150OUTSIDE
12
76
20
203535
2438.5
8 10
3
IN LID ONLY
HIDDEN HOLES IN
BOTTOM ONLY
BRS
10
M8
12
316
16
8
SCALE 1:1.5
BRS
SYN
9
427
14
M8
SEAL
13510
5
2
TUBE
10x9
BRS
BRS
SYN
8
535
TUBE
5x4
SOLDER
SCALE 1:5
FOR OTHER
DIMENSION
DETAILS
REFER TO
3-64
4SCALE 1:5
FOR OTHER
DIMENSION
DETAILS REFER
TO 3-64
S/S
BRS
SPS
BRS
40 34.54034.5
5
10
3 4
13510.5 10.5
60
1.5
SCALE 1:4
3-53
3-54
3-55
3-58
3-59
3-60
3mm THICK HEAT
INSULATION MATERIAL
SUCH AS GLASS WOOL etc.
3-61
3-62
0.7mm THICK ZINC PLATE
3-64
3-65
3-66
3-67
3-68A
3-68B
3-69
3-70
3-71
3-71
3-72
3-74
3-75
3-76
3-77
3-78
3-79
3-80
4-02
4-01
4-03A
4-05
4-06
4-07
4-08A
4-08B
4-09
REFER
TO 3-66 4-10
4-11
J.A.M. DE WAAL PAPAKURA NZ
PROJECT No 09C-16-00 PROJECTION
A3
Copyright ©
TITLE
DWG SCALE: 1:1 @A3 OR AS SHOWN
DRAWING CONTENTS MODEL SCALE: 1:1
J.A.M. DE WAAL. 12 BRIGHTWELL STREET PAPAKURA 2110.
NEW ZEALAND. PHONE: OO64 09 2988815. MOB: 0211791000
E-MAIL: dewaal@xtra.co.nz.
JDW DRAUGHTING SERVICES
NOTES: THIS STEAM PLANT IS BASED ON DRAWINGS AND ARTICLES WHICH APPEARED IN THE "MODELBOUWER" OF 1973
DATE
No: STMINST-10SHEET: 10 OF 12
DECEMBER-2015
PARTS AND ASSEMBLIES OF
STEAM PLANT & BURNER
COMPLETE STEAM PLANT INCLUDING TWO
STEAM ENGINES (1CYL + 2CYL VERTICAL)
JDWDS
Hotline: 033 666 2767
Kênh Youtube: Học Cơ Khí
Facebook: https://www.facebook.com/HocCoKhi
Website: www.hoccokhi.vn www.cokhi.org
Email: hoccokhi.info@gmail.com
shared
by
hoccokhi.vn
Tải nhiều tài liệu và video tự học miễn phí tại www.cokhi.org

11. 3-04 3-10
3-10
3-04
3-05
3-02
SA-3-301
3-06
3-08B
3-08A
3-11
3-07
3-07
3-07
SA-3-302
49.5
30°
30°
3-16
3-17
3-13
3-17
3-12
3-18
3-10
3-14
3-15
SA-3-303
14
3-11
3-11
3-21
3-23
3-23
3-23
3-23
3-22
3-24
SA-3-304
SA-3-305
3-11
3-24
3-25
3-27
3-26
3-28
SA-3-305
3-31
3-34
3-32
3-33
SA-3-307
3-38
3-35B
3-35A
3-36
3-37
SA-3-308
SA-3-308
3-29
3-29
3-44
SA-3-307
SA-3-306
SA-3-310
3-50
3-49
3-51
3-49
3-52 3-40
3-42
SA-3-309
3-47
3-48
3-46
3-49
3-49
3-45
SA-3-310
3-58
3-57
3-56
3-11
SA-3-311
3-64
3-65
3-66
SA-3-312
3-68A
3-68B
3-71A
3-71B
3-70
3-67
SA-3-313
3-69
3-20
SA-3-314
3-79
3-72
3-77
3-74
3-74
3-75
3-77
3-73
3-76
3-78
3-80
SA-3-315
3-39
3-63
3-62
3-43
SA-3-312 SA-3-309
SA-3-313
SA-3-315
SA-3-316
3-60
3-61
SA-3-316
SA-3-318SA-3-306
SA-3-316
4-01
4-02
SA-4-401
4-04
4-03B
SA-4-402A
4-04
4-03A
SA-4-402B
SA-4-401
SA-4-402B
SA-4-402A
SA-4-405
4-08B
4-09
4-10
SA-4-407
4-07 4-06 4-05
4-11
4-11
4-08A
SA-4-407
SA-4-410
58
J.A.M. DE WAAL PAPAKURA NZ
PROJECT No 09C-16-00 PROJECTION
A3
Copyright ©
TITLE
DWG SCALE: 1:1 @A3 OR AS SHOWN
DRAWING CONTENTS MODEL SCALE: 1:1
J.A.M. DE WAAL. 12 BRIGHTWELL STREET PAPAKURA 2110.
NEW ZEALAND. PHONE: OO64 09 2988815. MOB: 0211791000
E-MAIL: dewaal@xtra.co.nz.
JDW DRAUGHTING SERVICES
NOTES: THIS STEAM PLANT IS BASED ON DRAWINGS AND ARTICLES WHICH APPEARED IN THE "MODELBOUWER" OF 1973
DATE
No: STMINST-11SHEET: 11 OF 12
DECEMBER-2015
PARTS AND ASSEMBLIES OF
STEAM PLANT & BURNER
COMPLETE STEAM PLANT INCLUDING TWO
STEAM ENGINES (1CYL + 2CYL VERTICAL)
JDWDS
Hotline: 033 666 2767
Kênh Youtube: Học Cơ Khí
Facebook: https://www.facebook.com/HocCoKhi
Website: www.hoccokhi.vn www.cokhi.org
Email: hoccokhi.info@gmail.com
shared
by
hoccokhi.vn
Tải nhiều tài liệu và video tự học miễn phí tại www.cokhi.org

12. SA-3-318
SA-4-410
SA-4-405SA-1-120
SA-2-220
SA-3-301
SA-3-302
SA-3-304
SA-3-303
SA-3-314
3-19
3-54
3-53
3-55
3-59 3-09
3-01
MATERIAL ABBREVIATIONS:
ALU = ALUMINIUM
BRS = BRASS
BRZ = BRONZE OR GUNMETAL (BRZ/GM)
CI = CAST IRON
CU = COPPER
GRA = GRAPHITE
MS = MILD STEEL/BRIGHT MILD STEEL
S/S = SILVER STEEL OR STAINLESS STEEL
SPS = SPRING STEEL
PEEK= POLYETHER ETHER KETONE
SYN = SYNTHETIC MATERIAL SUCH AS VETON, NYLON, TEFLON OR RUBBER
IN GENERAL SYNTHETIC MATERIALS SOULD BE ABLE TO WITHSTAND
THE HEAT AND PRESSURE(S) APPLIED TO THEM.
nnn/nnn MEANS THAT EITHER MATERIAL CAN BE USED
OTHER ABBREVIATIONS
DP = DEEP
PF = PRESS FIT
PCD = PITCH CIRCLE DIAMETER
RM = REAM
HEX = HEXACON, 6SIDED
CP = COMPRESSED
KNL = KNURLED
CSK = COUNTERSINK
PL = PLACES
SA-n-xxx = SUB ASSEMBL-n-xxx
NOTES:
0. ALL DRAWINGS ARE IN METRIC MEASUREMENTS
1. ALL ENGINEERING PRACTICES SHALL BE APPLIED WITH REGARDS TO HOLE AND SHAFT TOLERANCES.
2. WHERE SCREWS OR BOLTS ARE USED THE CLEARANCE HOLES SHALL BE APPROXIMATELY 5% TO 8% LARGER
THAN THE MATCHING TAPPED HOLE.
3. PREFERABLY ALL TAPPED HOLES AND MATCHING SCREWS AND/OR BOLTS TO BE METRIC FINE (MF)
4. MATERIALS SPECIFIED ON THE DRAWINGS ARE INDICATIVE ONLY. THE BUILDER CAN MAKE HIS/HER OWN MATERIAL
CHOICE.
5. INQUIRE AT THE APPROPRIATE AUTHORITIES WHETHER OR NOT THIS BOILER REQUIRES A PRESSURE TEST
CERTIFICATE.
6. ALL CONNECTIONS/JOINTS WHICH HAVE STEAM PRESSURE APPLIED TO IT SHALL BE SILVER/HARD SOLDERED.
7. COMPRESSION SPRINGS ARE DRAWN IN COMPRESSED STATE (CP), UNCOMPRESSED STATE IS APPROX 40% TO 60%
LONGER THEN COMPRESSED STATE.
8. WHERE PREFERRED SCREW OR RIVETED CONNECTIONS CAN BE OMITTED AND PARTS CAN BE BONDED TOGETHER BY
USING EITHER HIGH STRENGTH GLUE, EPOXY RESIN, OR SOLDER.
9. PARTS WHICH ARE DIRECTLY EXPOSED TO STEAM AND/OR WATER SHOULD BE CONSTRUCTED USING NON-FERROUS
OR NON CORROSIVE MATERIAL SUCH AS BRASS, BRONZE, GUNMETAL, STAINLESS STEEL, COPPER OR MONEL.
10. THE ORDER IN WHICH THE PARTS/COMPONENTS ARE MANUFACTURED AND THE MODEL IS ASSEMBLED IS ENTIRELY
LEFT TO THE BUILDER/MODEL MAKER.
11. ERRORS AND/OR OMISSIONS MAY OCCUR IN THE DRAWINGS, DO NOT HESITATE TO CONTACT ME SO THAT THE
ERRORS/OMISSIONS CAN BE RECTIFIED.
12. A COLOUR SCHEME FOR THIS PROJECT IS ENTIRELY LEFT UP TO THE MODEL MAKER.
13. THE FOLLOWING ITEMS COULD BE REPLACED WITH PROPRIETY ITEMS : BOILER WATER LEVEL INDICATOR, STEAM
WHISTLE, SAFETY VALVE.
14 IF PREFERRED THE SPIRITS BURNER COULD BE REPLACED WITH A GAS BURNER. ALTERATIONS/MODIFICATIONS MAY
HAVE TO MADE TO BOILER TO ACCOMMODATE THE NEW EQUIPMENT.
J.A.M. DE WAAL PAPAKURA NZ
PROJECT No 09C-16-00 PROJECTION
A3
Copyright ©
TITLE
DWG SCALE: 1:1 @A3 OR AS SHOWN
DRAWING CONTENTS MODEL SCALE: 1:1
J.A.M. DE WAAL. 12 BRIGHTWELL STREET PAPAKURA 2110.
NEW ZEALAND. PHONE: OO64 09 2988815. MOB: 0211791000
E-MAIL: dewaal@xtra.co.nz.
JDW DRAUGHTING SERVICES
NOTES: THIS STEAM PLANT IS BASED ON DRAWINGS AND ARTICLES WHICH APPEARED IN THE "MODELBOUWER" OF 1973
DATE
No: STMINST-12SHEET: 12 OF 12
DECEMBER-2015
ISOMETRIC VIEW AND NOTES.COMPLETE STEAM PLANT INCLUDING TWO
STEAM ENGINES (1CYL + 2CYL VERTICAL)
JDWDS
Hotline: 033 666 2767
Kênh Youtube: Học Cơ Khí
Facebook: https://www.facebook.com/HocCoKhi
Website: www.hoccokhi.vn www.cokhi.org
Email: hoccokhi.info@gmail.com
shared
by
hoccokhi.vn
Tải nhiều tài liệu và video tự học miễn phí tại www.cokhi.org