Auto Tools Fyler – CarQuest – PetesPaint.ca – Q1 2019

NEW
RE
S I S TAN
T
WATER
P ROOF
WATER
TOOLS &EQUIPMENT
Offers valid March 28, 2019 - June 26, 2019
For more information, contact your local delivery store. Longer financing available up to 60 months.
Professional quality parts, service and solutions dedicated to your shop. 2nd Quarter 2019 – Canada Only
NEW
NEW
NEW
NEW
TECH TIPSee p. 3
DeWALT®
AND MILWAUKEE®
POWER AND AIR TOOLS
KEYS TO
HVAC SYSTEM
EVALUATION
SA10
Rise: 74-1/2"
Overall Height: 142-1/2"
Overall Width: 137"
Drive Through: 98-3/4"
Arm Reach: 22" - 59"
Challenger Lifts®
SA10
10,000 lb. 2-Post Lift
• Features 3-stage front arms which
provide greater overall arms sweep
with adjustable height and width
options
• Symmetric or True Asymmetric
setup
• Includes double telescoping screw pads, durable powder
coat finish
and plated arm restraints and pins
CLL SA10
* Contact your local store for pricing and availability
FINANCE IT
Challenger Lifts®
E-Series Heavy-Duty
12,000 lb. Symmetric 2-Post Lift
• Features include telescoping
arms, automatic arm restraints,
rubber protective door guards,
single point mechanical lock
release system and padded
overhead shut off system
• Includes Stack Adapter Extension Kit
• Optional 2' column height truck lift extensions that
accommodate even higher profile vehicles are also available
• Available in Red or Blue
CLL E12
* Contact your local store
for pricing and availability
Rise: 78
Overall Height: 165 - 177
Overall Width: 140
Drive Through: 103
Arm Reach: 36 - 54
FINANCE IT
E SERIES E-12
Bayco®
USB Rechargeable
EDC Flashlight
• 275 lumen CREE®
LED rated for 50,000+ hours
• Momentary or constant-on
• Sharp focused beam
• IP-X7Waterproof,chemical,heat and impact resistant
• Only 4-1/2 long and 3 oz.
• Meets the requirements for NFPA-1971-8.6 (2013)
• 2' USB cord with rechargeable lithium-ion battery (included)
BAY USB-320
$
7099
IN THE SPOTLIGHT
A/C SERVICE
SYSTEMS
See p. 30-32 for A/C service, testing tools and
chemicals from these leading brands.
3/8 DeWALT®
Air Ratchet
• Ergonomic handle with rubber
cushion grip and touch control trigger
SBD DWMT70776L
$
10095
Milwaukee®
M18 FUEL™
1/2 Compact Impact
Wrench with Pin Detent Kit
• Includes M18 FUEL™
1/2 Compact Impact
Wrench with Pin Detent, (2) M18™
RED LITHIUM™
Extended
Capacity Batteries, Multi-Voltage
Charger, Belt Clip and Hard Case
• Delivers 220 ft/lbs of max torque
• 4-mode DRIVE CONTROL™
provides greater
control over output speed and power
• Utilizes a pin detent design for maximum
socket retention
MLK 2755-22
$
55267
See p. 1-3, 17-19, 22-23, and 46-47 for
DeWALT® and Milwaukee® products

Services Financiers Affiliés
Affiliated Financial Services
FINANCING
One CALL Does it ALL with Affiliated Financial Services
Affiliated Financial Services (AFS),an industry leading financial services
company across Canada,provides innovative lease-to own finance options
for acquiring your NEWTools Equipment from CARQUEST®
Auto Parts.
Lease terms of 24 through 60 months are available.All leases are subject to
credit approval, 1st advance lease payment and a one time non-refundable
documentation fee of $100.00 will be charged on the 1st invoice upon
completion of the executed agreement. Minimum financed amount is
$1,000.00 as noted by sample payment information provided by each item.
Please note that finance payments will vary with every transaction, based
on transaction size, prevailing rates,
credit history, and other factors.Terms
may also vary.All offers subject to change
without notice.
Select your Tools Equipment
Call AFS at 1-855-209-0999
to complete the credit process
Upon credit approval and documentation,
order your new equipment www.groupesfa.com
Financing your New Equipment is as easy as
1-2-3 with Affiliated Financial Services…
1
2
3
INDEX
SALES POLICY
2 Offers valid March 28, 2019 - June 26, 2019
* Please note finance payments vary with every transaction, based on transaction size, prevailing rates, credit history, and other factors.Terms may also vary.All programs subject to final approval by Affiliated Financial Services.
Participation in this promotional program by a Carquest®
Auto Parts
store is voluntary. Every promotion is a bona fide offer. Occasionally,
an advertised item may not be available because of sales that exceed
anticipated demand or circumstances beyond our control.We reserve
the right to substitute an item of equal or better value in the event
that stock of an advertised product is depleted. Prices may vary in
different styles and from market to market. Additional delivery and
freight charges may be incurred. Errors in prices, descriptions and/or
illustrations are not the responsibility of the Carquest®
Auto Parts store.
PRICES GOOD IN CANADA ONLY.
Additional freight charges may apply on drop ship orders.
DIFM-20994171-CAN-ENG
A/C Cooling Service . . . . . . . . . . . . . . . . . 30, 31, 32
Abrasives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Air Compressors . . . . . . . . . . . . . . . . . . . . . . . . . 20, 21
Air Hose Air/Oil/Grease Reels . . . . . . . . . . . . 21, 22
Air Pressure Regulators. . . . . . . . . . . . . . . . . . . . 20, 21
Air Tools . . . . . . . . . . . . . . . . . . . . . . . . . . 1, 17, 18, 19
ATF Service Systems . . . . . . . . . . . . . . . . . . . . . . . . 33
Battery Service . . . . . . . . . . . . . . . . . . . . . . . . . 4, 5, 6
Brake Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Chassis/Suspension Service . . . . . . . . . . . . . . . . . . . 6
Creepers/Shop Seats . . . . . . . . . . . . . . . . . . . . . . . 34
Diagnostic Tools . . . . . . . . . . . . . 24, 25, 26, 27, 28, 60
Drill Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Engine Drivetrain. . . . . . . . . . . . . . . . . . . . . . . . . 6, 7
EVAP Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Fluid Evacuators . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53, 55
Hand Tools . . . . . . . . . . . . . . . . . . . . 10, 11, 12, 13, 14
Heavy-Duty Service . . . . . . . . . . . . . . . . . . . . . . . 28, 29
Hybrid Service . . . . . . . . . . . . . . . . . . . . . . . . . . 30, 31
Jump Starters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Leak Detectors . . . . . . . . . . . . . . . . . . . . . . . . . . 31, 32
Lifting Support . . . . . . . . . . . . . . . . . . 37, 38, 39, 40
Lighting . . . . . . . . . . . . . . . . . . . . . . . . . 42, 43, 44, 45
Oil/Lube Service . . . . . . . . . . . . . . . 45, 46, 47, 48, 49
PBE . . . . . . . . . . . . . . . . . . . . . . . . . . . 52, 53, 54, 55
Power/Pressure Washers . . . . . . . . . . . . . . . . . . 34, 35
Power Tools . . . . . . . . . . . . . . . . . . . . . . 1, 2, 3, 22, 23
Power Steering Service Systems . . . . . . . . . . . . . . . 33
Pullers Slide Hammers . . . . . . . . . . . . . . . . . . . 9, 10
Service Systems . . . . . . . . . . . . . . . . . . . . . . . . . 32, 33
Shop Equipment Safety . . . . . . . . . . . . . . . . . . 55, 56
Specialty Tools . . . . . . 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
Spray Guns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Tire Changers . . . . . . . . . . . . . . . . . . . . . 37, 38, 39, 40
Tire Service . . . . . . . . . . . . . . . . . . . . . . 37, 38, 39, 40
Tool Boxes/Storage . . . . . . . . . . . . . . . . . . . . . . 15, 16
Trailer/Towing . . . . . . . . . . . . . . . . . . . . 49, 50, 51, 52
Transfer Pumps . . . . . . . . . . . . . . . . . . . . . . . . . 47, 48
TPMS Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Vacuums . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 35
Welding . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55, 56, 57
Wheel Balancers . . . . . . . . . . . . . . . . . . . . . . . . 39, 40
Wire Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
NEW PRODUCTS
POWER IMPACTS POWER IMPACTS
DeWALT®
20V MAX
1/2 High Torque
Impact Wrench Kit
• Includes (1) 1/2 High Torque Impact, (1) Fast
Charger, (2) 20V Li-Ion 4 Ah batteries and Kit Bag
• 400 ft.-lbs. of maximum torque
• Hog ring anvil for quick and
easy socket changes
NEW
NEW
NEW
NEW
NEW
NEW
NEW
DeWALT®
12V MAX
3/8 Impact Wrench Kit
• Includes (1) 3/8 impact wrench,
(2) 12V li-ion battery packs,
(1) fast charger and
contractor bag
• Hog Ring Anvil for fast
socket changing
• 3 LEDs with
20-second delay
after trigger
release
• 1150 in.-lbs.
of torque power
SBD DCF813S2
$
22403
DeWALT®
20V MAX
3/8 Impact Wrench Kits
• Includes (1) Impact Wrench, (2) 20V Li-Ion
3 Ah batteries, (1) Fast Charger and kitbox
• Hog ring anvil for quick and
easy socket changes
• 3 LED lights with
20-second delay
after trigger release
SBD DCF883M2
$
43238
SBD DCF889HM2
$
54806
Milwaukee®
M18 FUEL™
3/8 Compact
Impact Wrench with Friction Ring
• Delivers 210 ft/lbs max torque
provides
greater control over output speed
and power
• Friction Ring design ensures quick
and easy socket changes
NOTE: Battery not included
MLK 2754-20
$
25267
Milwaukee®
M18 FUEL™
3/8 Compact
Impact Wrench with Friction Ring Kit
3/8 Compact Impact
Wrench with Friction Ring, (2) M18™
RED LITHIUM™
Extended Capacity Batteries, Multi-Volt Charger, Belt
Clip and Hard Case
• Delivers 210 ft/lbs max torque
provides greater
• Friction Ring design ensures quick
and easy socket changes
MLK 2754-22
$
55267
Milwaukee®
M18 FUEL™
High Torque
1/2 Impact Wrench with Friction Ring
• Delivers 1000 ft/lbs of fastening torque,
1400 ft/lbs of nut-busting torque
provides greater
• Friction ring design ensures quick and
easy socket changes
• LED light to illuminate the work area
MLK 2767-20
$
37946
Milwaukee®
M18 FUEL™
1/2 Mid-Torque
Impact Wrench with Friction Ring
• Delivers up to 450 ft/lbs of fastening torque,
600 ft/lbs nut-busting torque
• Compact length of 6.7 allows access
in tight spaces
• 3-Mode DRIVE CONTROL™
provides
greater control over output
speed and power
of max 2,400 RPM
MLK 2861-20
$
32142

CTI TECH TIP
For more information, contact your local delivery store. 3
Keys to proper HVAC system evaluation
With Air Conditioning season rapidly returning, it is a good time to review some keys to proper system evaluation. Modern
systems are finely tuned due to space and design targets. More systems use variable displacement compressors, while some
use Artificial Neural Networks to enhance operation.The goal is to control the cabin environment without using unnecessary
energy.This means that evaluation of the system should be done in a precise and repeatable manner. Manufacturers provide
A/C performance tests that are specific to the make, model, and year of vehicle.These procedures will include system settings
and details such as door condition (open or close) and window positions.With the vehicle properly conditioned according to
the test, temperatures, pressures, and performance, the specific ambient conditions can be evaluated.
Changing any part of the vehicle’s state can have a large impact on the results. Here are a couple of captures from a 2019
Chevy®
Colorado. In the first capture, the system was running and stabilized with the doors and windows closed at idle. Notice
the evapourator temperature sensor is showing 37 degrees and the compressor solenoid valve is commanded to 70% duty
cycle.The next capture shows what happened in under two minutes after opening the driver door six inches.The compressor
solenoid is not commanded at 100% duty cycle (max displacement) and the evapourator temperature has increased 10
degrees! This will change the vent temperature.
These details and specifications will be the basis for repair verification and system evaluation. It can even help our clients
understand the nature of system operation.
NewProducts
DeWALT®
Heat Gun Kit
• LCD display allows user to adjust temperature
within 50° increments
• Built-in overload protection shuts the heating
element down and prevents burn up
• Built-in innovative kickstand support provides
greater stability and prevents tip over
• Built-in hang ring adds a storage feature
• Cord protector keeps the cord from tearing
away from the housing
• Ergonomic comfort grip provides greater
comfort for long hours of use
• Lightweight and compact design weighs only
2.3 lbs
SBD D26960K
$
17884
NEW PRODUCTS
DeWALT®
20V MAX Drill Driver and
Impact Driver 2-Tool Combo Kit
• Includes (1) 1/2 Drill/Driver, (1) 1/4 Impact
Driver, (2) 20V MAX 1.3Ah battery packs,
20V MAX charger and Contractor Bag
• 1/2 Drill driver features two-speed
transmission and 1/2 single sleeve
ratcheting chuck
• 1/4 Impact features 3 LED
light ring with 20 second delay
• 1/4 Impact delivers 117 ft.-lbs. of
max torque
SBD DCK240C2
$
30767
MILWAUKEE®
M18 FUEL™
TOOL KITS
Milwaukee®
M18 FUEL™
5 Tool Combo Kit
Milwaukee®
M18 FUEL™
7 Tool Combo Kit
1/2 Hammer Drill/Driver, M18 FUEL™
1/4 Hex Impact Driver,
M18 FUEL™
SAWZALL®
Reciprocating Saw, M18 FUEL™
6-1/2 Circular Saw, M18 FUEL™
1/2 Mid-Torque Impact Wrench with Friction Ring, M18 FUEL™
4-1/2/5 Grinder,
Paddle Switch No-Lock, M18 FUEL™
Work Light, (2) M18™
RED LITHIUM™
Extended
Capacity Batteries, Multi-Voltage Charger, Side Handle, 6 18 TPI Thin Kerf Ice Hardened™
SAWZALL®
Blade, Circular Saw Blade, Grinding Disc, (3) Belt Clips, (2) Bit Holders and (2) Carrying Cases
Milwaukee®
M12™
Cordless
LITHIUM-ION 3-Tool Combo Kit
• Includes M12™
3/8 Drill/Driver, M12™
1/4 Hex
Impact Driver, M12™
HACKZALL™
Reciprocating
Saw, (2) M12™
RED LITHIUM CP1.5 Batteries,
M12™
Battery Charger, and Tool Bag
• Lightweight, hex impact driver delivers
1000 in/lbs of torque
and 0-2000 RPM
• Drill/driver delivers up to 275 in/lbs
of torque and 0-400, 0-1500 RPM
• On-board battery fuel gauge
displays remaining run time
MLK 2498-23
$
64731
NEW
NEW
NEW
NEW
NEW• Includes M18 FUEL™
SAWZALL®
Reciprocating
Saw, M18 FUEL™
1/2 Hammer Drill/Driver, M18
FUEL™
1/4 Hex Impact Driver, M18 FUEL™
6-1/2
Circular Saw, M18
FUEL™
Work Light,
(2) M18™
RED
LITHIUM Extended
Capacity Batteries,
Multi-Voltage Charger, Side
Handle, (2) Belt Clips,
(2) Bit Holders and
Carrying Case
MLK 2997-25
$
127678
MLK 2997-27
$
178571
FINANCE IT
FINANCE IT

BATTERY SERVICE
BATTERY CHARGERS/MAINTAINERS
Schumacher®
80A 12V Battery Charger/Engine Starter
• 80A engine start/20A Boost
• Charges standard,AGM and Gel, and deep-cycle batteries
• Microprocessor-controlled, automatically adjust amperage
rate, to charge and maintain
• Multi-stage charging for precision, safety and battery life
CBC SC1306
$
7999
Schumacher®
6A 6/12V Battery Charger/Maintainer
• Charges standard and AGM batteries
• Multi-stage charging for precision, safety and
battery life
• Float mode monitoring maintains optimum
battery charge
• Auto-volt detection – 6 or 12 volt
CBC SC1320
$
5899
Schumacher®
1.5A 6/12V Fully Automatic Battery Maintainer
• Maintains standard,AGM and deep-cycle batteries
• Microprocessor-controlled, automatically adjust
amperage rate, to charge and maintain
battery life
• Float mode monitoring maintains optimum
battery charge
CBC SC1355
$
2999
Schumacher®
15A 6/12V Fully Automatic Battery Maintainer
• Maintains standard,AGM and deep-cycle batteries
• Microprocessor-controlled, automatically adjust
amperage rate, to charge and maintain
battery life
• 15A rapid charge − 3A maintain
CBC SC1359
$
7799
Schumacher®
1.5A 6/12V Fully Automatic Battery Maintainer
• Specifically designed for vehicles in storage and cold weather
• Includes double-sided adhesive and cable tie for mounting
• Approved for under-the-hood mounting
• Multi-stage charging and float mode monitoring
CBC SC1300
$
4699
SOLAR®
BA7 12V Battery
Starting/Charging System Tester
• Tests multiple battery types including Conventional,
Maintenance Free,AGM, Gel Cell, Marine and Deep
Cycle batteries
• Operating range: 100-1200 CCA
• 20 Cables with reverse polarity and over-voltage protection
• 1 Year Limited Warranty
SLR BA7
$
9999
BATTERY TESTERS
DSR®
Industrial Series 6V/12V Battery and
12/24V Charging System Tester
with Built-in Printer
• 3 testers in 1: battery, charging, starting
• 3-button operation 16-character LCD with
adjustable back-lit readout
• Includes rugged carry case
CBC PST-900X
$
62999
MIDTRONICS PBT-300 Battery Tester Automotive
Battery and Electrical System Analyser
• Test 12V wet batteries from 100-1400 CCA
• Proven conductance algorithms ensure accuracy
• Simple, battery pass/fail result plus voltage
• Pass/fail result for starter and alternator
• Bad-cell detection
CBC PBT-300
$
26499
MIDTRONICS MDX-P300 with Integrated Printer
OTC®
SABRE HP Battery Electrical
System Diagnostic Tester
• Digital circuitry controls battery test loads to
accurately determine battery conditions
•Tests FLA andAGM batteries accurately down to 1V
• Includes SABRE HP,3' test leads,side-post terminal
adapters,instruction manual,and moulded plastic
carrying case
OTC 3167
$
72499
OTC®
Digital Battery Tester
• Tests 12V batteries (125-1400 CCAs) and analyses by measuring multiple
parameters within the battery to deliver accurate results
•Live voltmeter allows easy starting/charging system testing
• Indicates the battery’s good/bad status, voltage, and available CCAs
OTC 3183
$
19999
Requires downloading the FREE
OTC 3200 APP after purchase for
full functionality.
OTC 3200
$
49999
OTC®
3200 Smart Battery Tester
• Test battery, starting and charging
systems in less than 3 minutes
using your smartphone or tablet
• A comprehensive, full colour data
report is sent directly to your
smart device
• Smart devices (not included)
must have a rear-facing camera
to meet full requirements
• How It Works: Download the
OTC3200 App (compatible with
iOS and Android devices) and
scan the QR code on the battery
tester to immediately see battery
test results; To receive data about
the starting and charging system,
start the engine and scan the
next QR code to receive results
• Test 12V wet batteries from
100-1400 CCA
• Proven conductance algorithms
ensure accuracy
• Simple, battery pass/fail result
plus voltage
• Pass/fail result for starter alternator
• Bad-cell detection- AGM Gel
battery modes
• Test by CCA, CA, MCA, DIN, JIS,
and more
• Built-in thermal printer with
customizable header
• Multi-language – English, Spanish,
French Japanese
CBC MDX-P300
$
59999

BATTERY SERVICE
ES2500 900 Peak Amps
• 12V jump starter, 300 cranking amps
• Entry level professional jump starter
SLR ES2500
$
13999
ES5000 1500 Peak Amps
• 12V jump starter, 400 cranking amps
• For the professional who needs serious starting power
SLR ES5000
$
17999
• ES Series battery designed for
vehicle jump starting
• Battery status LEDs
• Automatic charging,
heavy duty flexible cables
• Hot Jaw clamps
SOLAR®
BOOSTER PAC®
ES6000
3000 Peak Amps, 12V Jump
Starter, 800 Cranking Amps
• Dual high performance ES Series batteries offer extended
cranking power and superior performance
• Automatic charging keeps Truck PAC®
in an always-ready state
• Includes 54 #4 AWG cables with Hot Jaw™
clamps
• 1-Year Limited Warranty
SLR ES6000
$
42999
SOLAR®
TRUCK PAC®
ES1224
3000 Peak Amps, 12/24V Jump
Starter, 750/400 Cranking Amps
• Switches from 12 to 24V with the turn of a knob
• Features automatic recharging, 60 cables and
Industrial Grade Hot Jaw™
clamps
• AWS Advanced Warning System™
alerts the
operator to unsafe jump starting conditions
SLR ES1224
$
67999
BatteryService
JUMP STARTERS
• Clore PROFORMER battery
specifically designed for jump
starting
• Heavy-duty PowerJaw™
clamps
with extra-long heavy-gauge 68
cables and a 1000A capacity
• High intensity LED task light
• Built-in 3A automatic
charging system
• Master On/Off switch
• Dual USB ports: 1.1A and 2.1A
• Coupon for
out-of-warranty
service
SLR JNC770R
$
24159
Schumacher®
10A 12V Fully Automatic Battery Charger
• Features START/STOP push button interface and LED indicators
CBC SC1339
$
6499
Schumacher®
50A 12V Fully Automatic Battery Charger/Engine Starter
• 50A Engine Start/10A Boost
• Float mode monitoring maintains optimum battery charge
CBC SC1361
$
6499
SOLAR®
Jump-N-Carry®
JNC770R 12V Jump
Starter 425 Cranking Amps, 1700 Peak Amps
BATTERY CHARGERS/ENGINE STARTERS
SOLAR®
Jump-N-Carry®
JNC660 12V 425 Cranking Amps, 1700 Peak Amps
• Built-in automatic charger, 46
cable reach and 12V outlet to
power accessories
• Weighs just 18 lbs
• Features Clore PROFORMER
battery
SLR JNC660
$
18999
DSR121 12V 250A
• 250A engine start, 15A fast
charge
CBC DSR121
$
60999
DSR122 6/12V 275A
• 125A(6V)/275A(12V) engine
start, 15A fast charge
CBC DSR122
$
74999
DSR123 12/24V 250A
• 250A (12V)/150A (24V) engine
start, 15A fast charge
CBC DSR123
$
79999
DSR®
PROSERIES BATTERY
CHARGERS/ENGINE STARTERS
• Charges standard,AGM and Gel, and deep-cycle batteries
• Float mode monitoring maintains optimum battery charge
• Reverse hook-up protection
Schumacher®
200A 12V Automatic Battery Charger/Engine Starter
• Fully-automatic, microprocessor-controlled
• Reverse hook-up protection
• Features 6’ power cord, retractable handle and
durable steel case
CBC SC1324
$
20999
Schumacher®
250A
6/12V Automatic
Battery Charger/Engine Starter
• Charges standard,AGM, gel and
deep-cycle batteries
• Microprocessor-controlled,
automatically adjust amperage rate,
to charge and maintain
• Multi-stage charging for precision,
safety and battery life
• Float mode monitoring maintains
optimum battery charge
CBC SC1325
$
20999

Since 1917
FINANCE IT
®
®
®
®
BRAKE SERVICE
POWERBUILT®
Brake Return Spring Tool
• For removing and installing return springs on brakes where the return spring hooks over a post
TLS 648411
$
299
SPECIALTY HAND TOOLS
A/C SERVICE
Lisle®
Master Disconnect Set
• A complete set of (8) popular disconnect tools
• Can be stored in a handy blow-moulded case
LST 39900
$
7789
Branick®
7600 Strut Spring Compressor
CHASSIS SERVICE
• Handles the heaviest coil-over-shocks,
on light trucks and SUV's, without
needing additional adapters
• Longer handles for extra torque
• Multi-positions upper spring hooks can
be arranged for ultimate flexibility to fit
factory coil spring configurations
• Heavy duty acme thread
•Wall,bench or mobile cart mounting
options
Max Spring Compression
Capacity: 3,000 lbs
Minimum Spring Diameter: 3-1/2
Maximum Spring Diameter: 11-1/2
BRN 7600
$
109999
CALIPERS/MICROMETERS
MEASURING TOOLS
STORM™
Electronic Digital
Caliper with Fractions
Range: 0-6/0- 150mm
Graduations: .001/64th’s/.01mm
• Digital display, inch/metric conversion
• Four measurements: inside, outside,
depth and step
STORM™
Digital
Range: 0-6/0- 150mm
Graduations: .0005/.01mm
• Four measurements: inside, outside,
depth and step
STORM™
Digital Rotor Gauge
Range: 0-5.50 or 0-140mm
Graduations: .0005 or .01mm
• Pointed anvil
• 3.5 long arms
CTI 3M430
$
9289
CTI 3C351
$
2389
CTI 3C301
$
4289
CTI 3B530
$
32999
STORM®
Digital Drum Gauge
Range: 6- 20.00/150mm - 500mm
Graduations: .001/.01mm
•Easy-to-read digital display with inch/metric conversion
•Selectable depth stops for easier use
•Pointed anvils and 4.25 long arms to
inspect drums before turning or replacing
•Plastic storage case
POWERBUILT®
Fender Cover
• 35 X 24
• Durable vinyl exterior with soft
inner liner
• Special pleated double top ridge
to hold cover in place while
keeping tools secure
CPM 640083
$
1599
Lisle®
Mini Tubing Cutter
BATTERY SERVICE
Schumacher®
Digital Power Inverters
410 W CBC PID-410
$
9489
Schumacher®
Cigarette Lighter Plug-In Power Inverter
140 W CBC PI-140
$
4489
ENGINE AND DRIVETRAIN
POWERBUILT®
Tubing Bender
• Bends automotive line tubing from 3/16 to 3/8 diameter
TLS 648484
$
1489
POWERBUILT®
Oxygen Sensor
Socket Kit (3-Piece)
• For removing and installing oxygen sensors
• Sockets have a special cut-out design that prevents
damage to wire leads
• Includes a heavy-duty carrying case and a detail
usage photo and instructions
TLS 648625
$
3589
02 Sensor Offset Puller TLS 648691 $15.89
POWERBUILT®
Fuel and
Transmission Line Disconnect Kit
• For quick and easy separation of the special
couplings found in fuel lines and transmission
cooler lines on domestic vehicles
TLS 648650
$
5189
Lisle®
Broken Spark Plug Remover for Ford 3 Valve
• Removes broken spark plugs from 2004 and newer Triton 3 valve
per cylinder engines (a common problem)
• Includes a unique porcelain pusher tool and a tapered left-hand
thread remover for removing the broken spark plug without leaving the
porcelain in the engine cylinder
• Porcelain pusher is used to press the porcelain piece, without
breaking the porcelain, farther into the plug tip
• Blow-moulded storage case included
LST 65600
$
9889
• For all types of metal tubing • Handles smallest tubing to 5/8 O.D.
• Completely non-corrosive
LST 50000
$
889
Lisle®
Spring Pliers
• Use plier tips to stretch brake spring
• Handle ends remove and install spring over anchor post
LST 11260
$
2789

SpecialtyHandTools
Lisle®
Serpentine Belt Tool
• Used to remove and install serpentine belts on systems
using the spring loaded idler pulley
• Fits 13mm, 14mm, 15mm, 16mm, 18mm, 19mm hex and
both 3/8 and 1/2 square drive sizes
• 13mm and 16mm sockets are built into the handle
• Eight low profile sockets and extension help to fit into
tight spots
• Includes 19mm socket for Honda and Toyota applications
LST 59800
$
6999
Lisle®
17-Piece Heavy-Duty
End Cap Wrench Set
• For use on the most popular domestic and import vehicles
• Set Includes: 65mm - 14 flute, 65/67mm - 14 flutes,
68mm - 14 flutes,73-74mm - 14 flutes,74/76mm - 15 flutes,
76mm - 14 flutes, 76mm - 30 flutes, 80mm - 15 flutes,
82mm - 15 flutes, 86mm - 14 flutes, 86mm - 16 flutes,
88.4mm - 15 flutes, 93mm - 15 flutes,
93mm - 36 flutes, 93mm - 45 flutes,
96mm - 18 flutes, 100mm - 15 flutes
end cap filter wrenches
LST 61500
$
13999
Heli-Coil®
SAE Metric Spark Plug Thread Repair Kits
• Kits contain a tap, installation tool, a quantity of inserts and detailed instructions
• The inserts are precision formed coils of extremely hard stainless steel (18-8) diamond shaped wire
• When installed into a tapped hole, the insert provides permanent conventional screw threads
Metric Kits Size (Number of Inserts)
M5 x 0.8 (12)
HC 5546-5 $44.99
M6 x 1 (12)
HC 5546-6 $39.99
M9 x 1.25 (12)
HC 5546-9 $44.99
M8 x 1.25 (12)
HC 5546-8 $41.29
M7 x 1 (12)
HC 5546-7 $51.19
M10 x 1.5 (12)
HC 5546-10 $44.99
M11 x 1.5 (6)
HC 5546-11 $52.99
M12 x 1.75 (6)
HC 5546-12 $62.79
M10 x 1.25 (12)
HC 5543-10 $62.99
M12 x 1.25 (6)
HC 5543-12 $79.01
1/4-20 (12)
HC 5521-4 $29.99
5/16-18 (12)
HC 5521-5 $29.99
5/8-11 (6)
HC 5521-10 $69.99
1/2-13 (6)
HC 5521-8 $38.99
7/16-14 (6)
HC 5521-7 $29.99
3/8-16 (12)
HC 5521-6 $29.99
1/2-20 (6)
HC 5528-8 $55.29
7/16-20 (6)
HC 5528-7 $49.69
3/8-24 (12)
HC 5528-6 $49.69
5/16-24 (12)
HC 5528-5 $49.69
SAE Kits Size (Number of Inserts)
Heli-Coil
®
M14 x 1.25 Sav-A-Thread Kit
• Can be used to repair both taper seat and gasket
type spark plug assemblies
• Three insert lengths available to accommodate all
spark plug reaches
• Piloted reamer tap means no drilling is necessary and
perfect alignment of the tapped hole
HC 5334-14
$
4729
Heli-Coil®
Sav-A-Thread Kits
• Contains a piloted reamer tap
(no drilling necessary),an installation
tool,and a quantity of inserts
• Includes six insert lengths to
accommodate all spark plug reaches
M18 x 1.50 Thread Size 1/2 Reach Size
HC 5523-18
$
20999
OTC®
Adjustable Hook Spanner Wrench
• Use for turret adjusting or packing gland nuts
• 1-1/2 - 4 capacity
• 24 handle, 11/16 diameter
OTC 885
$
14999
OTC®
Alternator Pulley Service Kit
• Hold the alternator shaft still so the pulley can be removed or installed
• Kit includes: Decoupler tool assembly, 17 mm hex drive, 17 mm Allen
wrench, 110 mm socket extension, 28/21 mm hex cap nut driver,
28 /18 mm hex cap nut driver 22 mm hex cap nut driver
OTC 6617
$
7999
OTC®
Valve Spring Compressor
• Designed to compress valve springs on Ford 3V 4.6L 5.4L
• Similar to OE p/n 303-1039
OTC 6684
$
22999
OTC®
Automatic Transmission
Clutch Spring Compressor
• For removing or installing the snap ring on a
transmission rear clutch piston
• For use on most American cars and light trucks
OTC 7024
$
16999
OTC®
Fuel Injection Cleaner Canister
• Designed for direct fuel rail and injection cleaning
• Stainless Steel Construction with wide throat to reduce spillage - safely
holds up to 22 oz.
• Easy to read 3-1/2 Gauge for setting accurate delivery pressure
• Includes blow-out fitting for use with shop air supply to remove residual
chemical from hose - improving product life
OTC 7448A
$
19999

TM
Lisle®
Oil Filter Pliers
• Two-position, slip-joint handle produces the range of three
separate conventional filter wrenches
• Jaws are bent at a 20° angle to fit more applications
• Sure grip teeth prevent slipping
• Range: 2-1/4 to 4
LST 50750
$
4189
Lisle®
Truck Tractor Oil Filter Pliers
• Fits most truck and tractor oil filters including: Case,
Caterpillar, Cummins, Detroit Diesel, John Deere,
Mack and other applications
• Range: 3-5/8 to 6
LST 50950
$
5889
OIL/LUBE SERVICE
Lisle®
Straight Handle Filter Wrench
• 1 stainless steel band with special “teeth” grips tightly
• Vinyl-covered handle provides firm, comfortable grip
LST 53900
$
889
Standard
3-1/2 - 3-7/8
LST 53700
$
1089
Cummins
Detroit Diesel
4-5/16 - 4-3/4
LST 54200
$
1589
Small
2-3/8 - 2-5/8
LST 54400
$
1189
Caterpillar
5-1/4 - 5-3/4
LST 54300
$
1689
John Deere
4-3/4 - 5-3/16
LST 53200
$
1589
Lisle®
Truck Oil/Fuel Filter Wrenches
• “Swivel Grip” handle makes it easy to turn in tight spots
• Tough, stainless steel bands with special “teeth” for extra
gripping power won’t slip
• Handles made of tubular steel for increased strength
Lisle®
Adjustable Oil Filter Wrench
• Stainless steel band with special teeth for extra gripping power
• 1/2 square drive
• Range: 4 3/8 - 5 5/8 (111.1 - 142.8mm)
LST 53100
$
1889
Standard
3-1/2 - 3-7/8
LST 53500
$
1089
Large
4-1/8 - 4-1/2
LST 53250
$
1289
Oil Filter Wrenches
• Features the swivel handle, gripper “teeth” and 1 wide stainless steel band
• Swivel handle makes it easy to turn filters in hard to reach locations
• Vinyl covered handle
Lisle®
Big Range Filter Wrench
• Range: Up to 6
• Use with 1/2 drive or 3/4 socket wrench
LST 63500
$
1189
Lisle®
Import Car Filter Wrench
• Range: 2-1/2 to 3-1/8
• Fits most all import car filters plus the common 3 domestic car filters
• Use with 3/8 drive socket
LST 63600
$
1389
Lisle®
Wide Range Filter Wrench
• Range: 3-1/8 to 3-7/8
• Steel jaws grip filter without slipping
• Use with 3/8 drive socket
LST 63250
$
1489
Lisle®
8 Qt. Dispenser
with Lid and Cap
• Includes spout cap and lid to
keep out contaminants
• Marked in quarts and litres
• Flexible 8 pouring spout
LST 19702
$
3489
Lisle®
6 Qt.
Oil Dispenser
• Marked in quarts and litres
• Flexible 8 pouring spout
LST 19732
$
2499
Lisle®
5-piece Filter Socket Set
• Contains very low profile, 6 point 24mm, 27mm, 29mm,
32mmand 35/36mm sockets for use on oil and fuel filter
canisters when replacing the lement. Use with 3/8 drive
• 2009 and up ChevyAveo,Pontiac G3 and 2011 and up Chevy
Cruze with 1.4L, 1.6L, 1.8L motor use the 24mm socket
• Use with 3/8 drive
LST 13300
$
5489
Lisle®
Oil Pan Plug Re-threading Kit
• Includes a piloted drill, spring-loaded tapping
tool and 5 magnetic drain plugs
• Ensures the new thread will be perpendicular to
the gasket surface to prevent leakage
• Works on soft steel and aluminum oil pans
with 1/2, 12mm 14mm threads
LST 58850
$
15899
OIL/LUBE SERVICE
Lisle®
Diesel Filter Wrenches for DAVCO
Specially Designed for Removing and Replacing the Main Filter
Collar and Vent Cap on Aftermarket Diesel Fuel Filter Systems.
• Half-moon design provides easier access to the fuel filter
• High strength steel prevents flexing while loosening filter collars
• Four teeth grab the vent cap securely to prevent damage
5 Wrench
• Works on diesel engines with fuel flow rates up to 60 gph, Class 4, 5, 6
trucks, pickup trucks, refrigeration units and some Biodiesel applications
LST 61090
$
3089
6 Wrench
•Works on diesel engines found in Caterpillar CT660,CT11,CT13,CT15,Cummins,
Detroit Diesel,International,Mercedes-Benz,Paccar,DaimlerTrucks North
America,Kenworth,Mack,Navistar,Peterbilt,Thomas Built Buses andVolvo
LST 61110
$
3299
8 Wrench
• Works on Detroit Diesel DD13, DD15 and DD16 engines found in Paccar,
Daimler Trucks North America and Volvo
LST 61130
$
4189
Lisle®
Diesel Filter Wrench for Paccar
• Removes and installs bows on newer Paccar chassis mounted
fuel filter assemblies
• Half-moon design allows easier access to the fuel filter
found on Kenworth, Peterbilt and Cummins diesels
LST 61060
$
2799

SpecialtyHandTools
POWERBUILT®
Tie Rod Puller
• For separating tie rod ends from tie rods
• Can be to used for separating pitman
arms from steering gear
TLS 648692
$
2189
PULLERS/SLIDE HAMMERS
Carquest®
Gear Pullers
4 Jaw Midget, 2-Ton
Max Spread: 4 Max Reach: 3-1/2
CPE 31533
$
3449
6 Jaw Reversible, 5-Ton
CPE 31534
$
3489
9 Reversible 2-Jaw, 7-Ton
CPE 31536
$
7649
8-N-1 Puller 16 Pieces Makes 8-Different
Pullers 2 or 3 Jaw Configurations, 2-Ton
CPE 31541
$
10289
POWERBUILT®
Seal Puller
• Designed for removing oil and grease seals
• Two hardened tip sizes
TLS 648494
$
889
OTC®
Brass Punch Set
• Includes 2 punches: 8 punch (5/8 hex, tapered to 3/8) and 10”
straight punch (3/4” diameter, chamfered at both ends)
OTC 4602
$
4929
OTC®
3-Piece Brass Hammer and Punch Set
• Includes 24 oz. hammer, drift punch and tapered punch
OTC 4606
$
9999
OTC®
9-Piece Brass Hammer
and Punch Set
• Includes 2 hammers, 2 tapered punches,
1 hex tapered punch, 2 drift punches,
and 2 pin punches
OTC®
Stinger Interchangeable Punch Chisel Set
• Includes: (12) punches and chisels; (5) flat chisels; 1/2, 5/8, 3/4,
7/8 and 1 wide blades, (1) cape chisel; 1/4 wide blade, (2) taper
punches; 1/8 and 1/4, (2) pin punches; 3/16 and 1/4, and
(2) centre punches; 1/8 and 3/16
• Includes double-locking driver handle that holds the
punch and chisel securely in place,and the easy grip
handle also protects hands from being hit by hammer
• Moulded case.
OTC 4605
$
9989
OTC®
4-Piece Short Pick and Hook Set
• Includes four 6-1/2” soft-handled picks with assorted tip shapes
• Designed for marking, removing o-rings, accessing snap
rings and other assorted applications
• Packaged in moulded tray
OTC 8262
$
2999
OTC®
4-Piece Long Pick and Hook Set
• Includes four 9-1/4” soft-handled picks with
assorted tip shapes
• Designed for marking, removing o-rings, accessing
snap rings and other assorted applications
• Packaged in moulded tray
OTC 8263
$
2999
OTC®
Pick/Hook and Hose Removal Set
• Includes 6-Piece Hose Removal Set (8260),
4-Piece Short Pick and Hook Set (8262) and
4-Piece Long Pick and Hook Set (8263)
• Packaged in moulded trays
OTC 8260M
$
12999
OTC®
Universal Outside Thread Chaser
• Quickly restore threads to near new condition
without expensive thread cutting equipment
• Replaceable V-pads and dies
• Use for 1-1/4” to 5” OD
OTC 7402
$
15899
Utility Knife
• Includes one blade
Carbon Gasket Scraper
• Features a 1 wide heat treated carbon steel
blade with a corrosion resistant black oxide finish
CPM 647367
$
679
CPM 836317
$
499
Lisle®
Razor Blades
• Stainless steel, single edge
• 100-pack LST 52150
$
1189
OTC®
Grip-O-Matic 1-Ton Puller
OTC®
Pilot Bearing Puller
• Designed to pull flywheel pilot bearings in close
quarters where slide hammer cannot be used
1/2 to 1-1/2
OTC 7318
$
12999
7/8” to 2”
OTC 7319
$
15999
• Max Reach 2-1/8”,
Max Spread 3-1/4”
• Screw Size 5/16”-24 x 3-7/8”
• Jaw Thickness 9/64”,Width ¼”
OTC 1020
$
5999
OTC 4629
$
16999

®
HEX KEY SETS
POWERBUILT®
9-Piece Ball End
Long Arm Hex Key Sets
Metric Set
• Includes 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm,
6mm, 8mm, 10mm hex keys.
TLS 640082
SAE Set
• Includes 1/16, 5/64, 3/32, 1/8, 5/32, 3/16,
1/4, 5/16 3/8 hex keys
TLS 640081
YOUR CHOICE
$
1489
EACH
POWERBUILT®
Micrometer Torque Wrenches
• Locking handle prevents accidental setting changes
1/2 Drive Click Torque Wrench
• 10-150 ft.-lbs.
TLS 644999
$
5899
CP89 Series Torque Wrenches
1/4 50 — 250 in.-lbs.
CP CP8905
$
19099
1/2 30 — 250 ft.-lbs.
CP CP8917
$
21979
• 54 fixed teeth ratchet head with quick
socket release
• Torque adjustment with manual locking
in front of the handle
• Fine scale graduation (1 Nm or 1 ft.-lbs.)
• Lightweight but robust aluminum handle
• Sensitive and sound signals when
reaching the torque
• Measurements saved for later
download via email
OTC®
Tire Spoons
• Unique Convex Slip Head curved design allows the spoon to slide
easily into the tire bead while the spoon bump limits the depth for
quick-and-easy operation
Extending Tire Spoon 22, Extends to 34, 3/4 diameter
• Twist-lock feature allows the spoon to be extended to any length and
locked into position with a twist of the collar
OTC 5724
$
17499
HD Sliding Tire Spoon 38, Extends to 52, 3/4 diameter
• Inner slide bar provides hammer action to easily insert and remove
the spoon
OTC 5716
$
16599
Sliding Dual Tire Spoon 35, 3/4 diameter
• Unique configuration provides mount and demount heads on either
end with the aid of a slide hammer mounted mid bar, allowing for
hammering either end in or out of the tire bead
•Twist-lock feature locks 3.5 lb.slide weight in position
OTC 5720
$
18979
TIRE/WHEEL SERVICE
POWERBUILT®
TORX®
Key Wrench Set
6-Piece Set
TLS 640685
$
1789
PULLERS/SLIDE HAMMERS
OTC®
Puller Leg Set
• Extra set of 34” legs for Push-Puller (OTC 939)
OTC 1113
$
52999
OTC®
Cylinder Sleeve Removal Plate
• Bore size 4-7/8”
• Removal plate will fit a full spectrum of cylinder sleeve sizes
• Designed to work with sets 1200, 1202 and 1203
POWERBUILT®
Harmonic
Balance Installer Kit
• For removing and installing harmonic
balancers that have threaded holes
• Fits balancers found on many
automotive and light truck applications
TLS 648994
$
11789
OTC®
Brake Drum and Rotor Puller
• One person can easily set the tool in place and use
for tough pulls even where there is little access to insert the jaws
• Spread to 12-3/4 and 5 of reach. 7-tons of force, yet weighs
less than 10 lbs
• Can be used with air tools (not included) to reduce
time and fatigue
OTC 6980
$
16999
OTC 1242
$
16999
OTC®
BLUE FORCE PRY BAR SETS
• Dual due-meter handle for solid ergonomics
• Striking cap contacts bar protecting handle
24, 36 and 48
bar shank lengths
OTC 8203L
$
19999
8, 12 and 18
bar shank lengths
OTC 8203S
$
7989
Lisle®
9-Piece Metric Hex Key Set
• Includes 9 heat-treated alloy
hex keys: 1.5mm— 10mm
LST 42300
$
999
Lisle®
12-Piece TORX®
Bit Set
• Includes the T-10 through T-50; and T-47,T-55 and T-60 bits
• T-10 through T-30 are 1/4 drive,T-40 through T-55 are 3/8 drive,T-60 is 1/2 drive
• Convenient vinyl holder included
LST 27200
$
4389
TORQUE WRENCHES
STORM™
Torque Wrench
• Chrome plated alloy steel • Reversible ratchet head
1/2 Drive
• 25-250 ft.-lbs.
CTI 3T425
$
13999
1/2 Drive Needle Torque Wrench
• 0-140 ft.-lbs.
TLS 644044
$
2189

TORX®
/ HEX BIT SETS
POWERBUILT®
3/8 Drive Metric Hex Bit
Socket Set 7-Piece Set
• Includes 3mm-8mm and 10mm chrome vanadium bit
sockets in reusable plastic holder
TLS 648663
$
1889
POWERBUILT®
3/8 Drive Extended Length
TORX®
Bit Socket Set 4-Piece Set
•Includes T-40,T-45,T-47 and T-50 3/8 drive TORX bit sockets.
•6 length for added reach
TLS 647058
$
1589
POWERBUILT®
1/4, 3/8 1/2 Drive
TORX®
Bit Socket Set 13-Piece Set
• Includes 1/4; T-10 to T-30, 3/8; T-40 to T-55 1/2;
T-60 T-70 bit sockets.
TLS 940146
$
3189
SpecialtyHandTools
HAMMERS
• Heat-treated hardened steel head.Tough, shock-absorbing fibreglass handle. Lifetime warranty.
2.5lb. Club Hammer
TLS 648332 $19.89
24 oz. Ball Pein Hammer
TLS 648330 $22.99
16 oz. Ball Pein Hammer
TLS 648329 $21.89
16 oz. Rubber Mallet
TLS 648336 $18.99
16 oz. Claw Hammer
TLS 640948 $19.95
16 oz. Soft Face Mallet
TLS 648335 $21.89
648332
648336
640948
648335
648329
648330
6-Piece Precision Screwdriver Set
• Swivel end handles contained in a plastic carry case
• Contains: Slotted 1.4, 1.8, 2.4mm and Phillips #00, #0, #1
TLS 646507
$
889
Lisle®
Lock Ring Pliers
Lisle®
Convertible Internal External Snap Ring Pliers
•Compresses internal rings in one position
•Move the quick change reversing lever to expand external rings
•Comes with four sets of tips in a plastic box
LST 46000
$
1789
• Spreads lock rings commonly found on
transmissions,master cylinders,brakes,etc.
• Jaws are knurled on the end
to prevent slipping
Jaw range: 3/32 closed,
15/16 open.
LST 44900
$
2189
Lisle®
Hog Ring Pliers
Spring loaded jaws hold the hog ring during use
• Designed to close hog ring fasteners used on upholstery on
many domestic and import vehicles
• Steel pliers are durable and easy to use. Pliers have cushioned
grips for comfort
Straight LST 61400
Angled LST 61410
YOUR CHOICE
$
3189
EACH
POWERBUILT®
Combination
Snap Ring Plier Set
• For removing and installing internal and external
snap rings
TLS 648598
$
1189
SPECIALTY PLIERS
5-Piece Torx®
Screwdriver Set
• Oversized Maxi-Grip handle for higher torque
and added comfort
• Sand-blasted and magnetized tip for better fastener grip
• Contains: T-15 x 3,T-20 x 3,T-25 x 4,T-27 x 4'',T-30 x 5
TLS 646046
$
3289
2-Piece Pocket Screwdriver Set
• Oversized Maxi-Grip handle for higher torque and
added comfort. Premium chrome vanadium shaft
• Contains: Slotted 1/8 x 2-1/2 and Phillips #0 x 2-1/2.
TLS 646048
$
689
5-Piece Screwdriver Set
• Oversized Maxi-Grip handle for higher
torque and added comfort
• Contains: Slotted 1/4 x 4, 3/16 x 3, 1/4 x 6 and Phillips
#1 x 3, #2 x 4.
TLS 646500
$
1999
S-1x4 TLS 646053
$2.69
SCREWDRIVERS
Robertson Screwdrivers
S-2x4 TLS 646054
$2.89
S-3x4 TLS 646055
$2.89
OTC®
3-Piece Pin/Body Clip Plier Set
• Includes three jaw configurations: straight,
45° and 90°
• Safely remove and reuse fasteners without
damaging anchor
• Lifetime warranty
OTC 2497
$
6539
OTC®
Straight Retaining Ring Pliers
• Convertible pliers can be used on automotive snap rings
• Size .070 diameter
OTC 1340
$
3999
OTC®
12-LB Double Face Indestructible Sledge Hammer
• Drop-forged head is induction-hardened for long life
• Ergonomic rubber grip handle reinforced
with steel bars
• Lifetime Marathon Warranty
• Meets ANSI/BS876 specifications
OTC 1230
$
16999

Curved Jaw with Wire Cutter
Curved Jaw
Straight Jaw
Long Nose
IRWIN®
5-Piece Original
Locking Pliers Tool Bag Set
• Set includes 10R,
10WR, 7CR, 5WR and
6LR in a heavy-duty tool bag.
PET 2077704
$
9999
IRWIN VICE GRIPS®
IRWIN®
CLAMPS
C-Clamp with Swivel Pads
Sheet Metal Clamp
8 PET 23
$
3299
Locking Chain Clamp
9 PET 27ZR
$
5899
Locking Welding Clamp
9 PET 25ZR
$
3999
Linesman
7 TLS 640391
$
1689
POWERBUILT®
PLIERS
Long Reach Long Nose
11 TLS 640860
$
1989
Long Nose
Diagonal
Groove Joint
Slip Joint
8 TLS 640395
$
1189
10 TLS 640389
$
1589
12 TLS 640390
$
2389
Long Nose Hose Jaw
11 TLS 640863
$
1989
90-Degree Long Nose
11 TLS 640862
$
1989
Mini Long Nose
5 TLS 640409
$
889
6 TLS 640392
$
1189
8 TLS 640393
$
1689
6 TLS 640386
$
1189
7 TLS 640387
$
1889
7 TLS 646539
$
1589
10 TLS 646540
$
1689
Long Nose
6 TLS 645015
$
1589
Locking Pliers
•With ergonomic cushioned grips
POWERBUILT®
LOCKING PLIERS
6 PET 17
$
2461
6 PET 18
$
2909
11 PET 19
$
2749
11 PET 20
$
4769
C-Clamp
7 PET 4935578
$
2299
10 PET 4935576
$
2399
4 PET 1602L3
$
2279
9 PET 1502L3
$
2499
6 PET 1402L3
$
1779
4 PET 1002L3
$
1379
7 PET 702L3
$
1699
5 PET 902L3
$
1599
10 PET 0502L3
$
1799
7 PET 7R-3
$
1999
10 PET 0102L3
$
1859
8 TLS 640388
$
1989
OTC®
Weather Pack Ratcheting Crimper Kit
• Ratcheting crimp action to manage environmentally sealed
connection systems on your vehicle
• Includes 2 interchangeable dies: AWG 22/20-18
(DIN .35/0.5-0.8 mm²) andAWG 16-14/12 (Din 1.0-2.0/3.0 mm²)
• Dies easily slip into place and are magnetically secure
OTC 4484
$
9499
Locking Panel Clamp
9PET 251
$
3999
Locking Pliers with Pivot Jaw
10 TLS 645016
$
1889
IRWIN®
3-Piece Snips Set
• Contains a utility snip, multi-purpose
extra cut snip with a 3-1/8 length
and a thinner snip
PET 2073704
$
7559
IRWIN®
PLIERS
8 PET 2078108
$
2799
10 PET 2078110
$
3199
12 PET 2078112
$
3999
Groove Lock V-Jaw
Diagonal Cutting Pliers
7 PET 2078307
$
2459

POWERBUILT®
Ratcheting Combo Set 7-Piece Set
SAE Set
• 5/16 to 3/4
TLS 640990
Metric Set
• 8mm to 19mm
TLS 640991
DRIVE SOCKET SETS
1/4 72-Tooth Gear-to-Gear Ratchet
TLS 649985
$
2189
10 TLS 644042
$
1689
12 TLS 644043
$
2289
YOUR CHOICE
$
12889
EACH
SAE Set
• Includes 5/32 to 9/16 sockets
TLS 640497
$
1089
Metric Set
• Includes 4mm to 14mm sockets
TLS 640498
$
1389
1/4 Drive Metric SAE Socket Sets 11-Piece 6 pt. Set
• Mirror polished chrome vanadium steel with dual grease rings and
punched centre holes for added work depth
3/8 Drive 36 Tooth Quick
Release Gear-to-Gear Ratchet
TLS 641520
$
2589
3/8 DRIVE RATCHETS
3/8 Drive Flex Handle
10 TLS 641504
$
1089
3/8 Drive 41 Tooth Spin Disc Ratchet
TLS 641505
$
1689
POWERBUILT®
1/4 3/8 E-Torx Socket Set 10-Piece Set
• Contains 1/4 Drive E-4 thru E-8 and 3/8 Drive E-10,E-12,E-14,E-16,E-18
TLS 648667
$
2489
TLS 641509
$
289
POWERBUILT®
3/8 Socket Rail
• Holds 16 — 3/8 sockets.
1/2 Drive
TLS 640856
$
2189
WOBBLE EXTENSION SETS
SOCKET ADAPTERS
• Includes 3, 5 and 10 chrome vanadium extension bars
• Operates at angles up to 25° from vertical
3/8 Drive
TLS 640857
$
1589
1/2 (F) x 3/8 (M)
TLS 642500
$
389
1/2 (F) x 3/4 (M)
TLS 942501
$
789
POWERBUILT®
Socket Adapter Set
4-Piece Set
TLS 640848
$
789
12 TLS 642504
$
1489
18 TLS 640853
$
2389
24 TLS 640854
$
3689
1/2 DRIVE RATCHETS
1/2 Drive Flex Handle Ratchet
SpecialtyHandTools
POWERBUILT®
Adjustable Wrenches
• Extra thick 1 beam design
WRENCHES
4 TLS 944039
$
989
6 TLS 644040
$
1089
8 TLS 644041
$
1489
IRWIN®
VISE-GRIP®
Quick Adjusting Pipe Wrench
• 2-1/4 jaw capacity
• Ideal for pipe up to 1-1/2 diameter
PET 274001SM
$
4499
POWERBUILT®
Stubby
Wrench Combo Set 7-Piece Set
SAE Set
• 3/8 to 3/4
TLS 640203
Metric SET
• 10mm to 18mm
TLS 640204
1/4 DRIVE RATCHETS
1/4 Drive 36-Tooth Quick Release Gear-to-Gear Ratchet
TLS 640508
$
1889
YOUR CHOICE
$
2589
EACH
OTC®
Chain Wrench
• 13” handle with ½” to 4-3/4” capacity
• Ratcheting head design allows user to turn in either
direction without removing wrench from work
OTC 7400
$
6909
OTC®
SOCKET SETS
5-Piece MORTORQ®
Super Bit Socket Set
• Approved for use on MORTORQ®
Super Fasteners
• Includes five popular sizes: MTS: 0, 1, 2, 3, 4
• Superior S2 material and durable design
OTC 5933
$
2599
8-Piece XZN “Super Short” Socket Bit Set
• Short profile for fasteners in tight quarters
• Includes sizes: 4, 5, 6, 8, 10, 12, 14 and 16mm
• Use with internal square drive or external hex drive
OTC 5942
$
5439
1/2 Drive 45 Tooth Spin Disc Ratchet
TLS 642505
$
2189
1/2 Drive 36 Tooth Quick Release
Gear-to-Gear Ratchet
TLS 642509
$
3789
3/8 Drive 72 Tooth Sealed Head
Gear-to-Gear Ratchet
TLS 649986
$
2589

POWERBUILT®
82-Piece Tool Set
1/4, 3/8 1/2 Drive SAE/Metric
Socket Wrench Set
•1/4 drive: ratchet, 3 extension, 6 pt. SAE; 5/32 - 1/2 and
Metric; 4mm - 13mm, deep well SAE; 1/4- 11/32, 12 pt.
SAE; 3/16- 1/2 and Metric; 8mm - 13mm sockets.
•3/8 drive: ratchet, 3 extension, 8 pt. SAE; 1/4, 5/16,
3/8, 12 pt. SAE; 3/8 - 13/16 and Metric; 9mm - 19mm;
6 pt. deep well SAE; 3/8 - 9/16 sockets and a 5/8 spark
plug socket.
•1/2 drive: ratchet, 12 pt. SAE; 1/2 - 7/8 sockets.
•3/8 - 5/8 Combination wrenches and storage case.
TLS 640076
$
10789
EXTRACTOR SETS
6-Piece Set #1-#5
CPE 73414
$
2189
CENTURY®
Spiral Flute Extractor Set
6-Piece Set #1-#5
CPE 73215
$
1589
6-Piece Set #1-#5
CPE 73415
$
1489
CENTURY®
Extractor
Drill Set 10-Piece Set
• Includes 5/64-17/64 quick cut-point drills
and #1 - #5 spiral screw extractors
CPE 88710
$
2889
1/2 DRIVE IMPACT SOCKET SETS
YOUR CHOICE
$
7989
YOUR CHOICE
$
9489
EACH
EACH
Metric Set
•Includes 10 - 19mm, 21mm - 24mm, 27mm,
30mm, 32mm impact sockets, 5 impact
extension, storage case.
TLS 940838
SAE Set
•Includes 5/16 - 1-5/16 impact sockets,
5 impact extension, storage case
TLS 940837
SAE Set
•Includes 3/8 - 1, deep
well impact sockets
TLS 647049
POWERBUILT®
1/2 Drive Deep Well Impact Socket Sets
11-Piece 6 pt. Set
Metric Set
•Includes 10mm -14mm, 16mm, 17mm, 19mm,
21mm - 24mm, deep well impact sockets
TLS 647048
POWERBUILT®
1/2 Drive Impact Socket Sets
18-Piece 6 pt. Set
POWERBUILT®
1/2 Drive Impact Adapter Universal Joint Set
7-Piece Set
• Includes 1/4, 3/8 and 1/2 drive impact universal joints
• 1/4 F x 3/8 M, 3/8 F x 1/4 M, 3/8 F x 1/2 M,
and 1/2 F x 3/8 M impact adapters
TLS 647095
$
4789
1/2 (F) x 3/8 (M)
TLS 647097$7.89
3/4 (F) x 1/2 (M)
TLS 940586 $15.89
DEEP IMPACT SOCKET SETS
DeWALT®
1/2 SAE Deep Impact Socket Set
7-Piece Set
• Includes: 1/2, 9/16, 5/8,
11/16, 3/4, 13/16, and 7/8
SBD DWMT74448OSP
$
3845
DeWALT®
1/2 Metric Deep Impact Socket Set
7-Piece Set
• Includes: 13mm, 14mm, 15mm,
16mm, 17mm, 18mm, 19mm
SBD DWMT744490SP
$
3845
12-Piece Standard TORX®
Socket Set
• Includes the following sizes: 1/4 - T10,T15,T20,T25,
T27,T30; 3/8- T40,T45,T47,T50,T55; 1/2 - T60
Disclaimer: Not rated for or to be used with impact tools
OTC 6100
$
4939
53-Piece Master TORX Bit Socket Set
• Includes various sizes of TORX,TORX PLUS,Tamper
Resistant TORX, Bit Sockets and External TORX Sockets
in 1/4, 3/8 and 1/2 square drive
• Packaged in hard plastic clamshell case for
protection and organization
Disclaimer: Not rated for or to be
used with impact tools
OTC 5900A-PLUS
$
10999
OTC®
9-Piece Power Driver Socket Extensions
• 5/16 hex secures extension in your power tools collet
• 1/4, 3/8 and 1/2 square drives attach to your standard and metric sockets
• 2, 6 and 12 lengths let you control your
tool application for any situation
• Springloaded square drive ball bearing
holds socket securely
Disclaimer: Not rated for or to be
used with impact drivers
OTC 5943
$
7999
OTC®
SOCKET SETS
CENTURY®
4-Piece File Set
•Includes 6 mill bastard file, 6 round file, 6 X-slim
taper file, handle and two inserts to fit all files included
CPE 72470
$
1489
CENTURY®
40-Piece SAE Tap Die Set
• Sets include: 0 - 1/4 T-handle tap, 1/4 - 1/2 T-handle tap
wrench, 0 - 1 adjustable tap wrench, 1 adjustable die stock,
pitch gauge, and screwdriver
• NC Dies: 4-40, 6-32, 8-32, 12-24, 1/4-20, 5/16-18,
3/8-16, 7/16-14, 1/2-13
• NF Dies: 10-32, 1/4-28, 5/16-24, 3/8-24,
7/16-20, 1/2-20 and NPT 1/8-27
CPE 98900
$
11999
NEW

FINANCE ITFINANCE IT
ToolStorage
CENTURY®
BI-METAL COBALT
HACKSAW BLADES
Fine 12 x 32T
CPE 04032 $3.89
Medium 12 x 24T
CPE 04024 $3.89
Coarse 12 x 18T
CPE 04018 $3.89
Fine 12 x 32T
CPE 04432 $2.89
Medium 12 x 24T
CPE 04424 $2.99
Coarse 12 x 18T
CPE 04418 $3.89
WIRE SERVICE
Mag-Torch 3-in-1 Butane Torch
• Compact table-top torch can be used in a variety of applications
MGT MT780
$
3399
Mag-Torch Butane Cylinder 5.6 oz
MGT MT150B-4 $4.99
TIRE/WHEEL SERVICE
OTC®
Hands Free Air Chuck
Makes Bead-Seating a One-Man Job!
• Perfect for applications where the tire valve is facing the
floor while seating the tire bead, such as most dual wheel
configurations
• Hooks on the top bead seat of the wheel and the spring pressure
holds the chuck on the tire valve pointing to the opposite side
• Ball valve included to allow inflation only when needed
OTC 5745
$
6999
5/32 X 8-Spiral Cut
CPE 04072
$2.89
3/16 X 8-Spiral Cut
CPE 04073
$2.89
7/32 X 8-Spiral Cut
CPE 04074
$2.99
CENTURY®
CHAINSAW FILES
TOOL STORAGE
GRAY TOOLS PRO+ SERIES
• Heavy-duty 100 lbs. bearing slides standard on
all drawers.
• Completely redesigned locking system with
tubular key.
• Smooth and quiet rolling premium 5”x 2”casters
with precision sealed bearings and 360º top brake
• Chrome plated cast drawer handles
• Drawer liners included on all models
• Dual metal rear drawer locking hook for
positive locking
• Automotive style powder coat paint finish for
superior scratch and chemical resistance
A
A B
D
B
C
6 Drawer Top Chest - PRO+ Series
26 x 16 x 16-1/8
• Capacity: 4,654 cu. in.
GRY 93106
$
54999
26 x 18-3/4 x 21
GRY 93109
$
69799
C 9 Drawer Top Chest - PRO+ Series
41-1/2 x 18-1/2 x 23-1/2
GRY 93119
$
121999
D 15 Drawer Roller Cabinet - PRO+ Series
42 x 19 x 43-1/2
GRY 93215
$
176899
26 Tool Top Chests
42 Tool Top Chest and Roller Cabinet

FINANCE IT
FINANCE IT
B
A
TOOL STORAGE
D
D
E
F
E F
C
28 Roller Cabinet – 7 Drawers
28 x 18 x 40
42 Top Chest – 8 Drawers
42 x 18 x 18
42 Roller Cabinet – 12 Drawers
42 x 18 x 41
GRAY TOOLS PRO+ SERIES
DYNAMICS TOOLS
• Heavy-duty 100 lbs. bearing slides standard on
all drawers.
• Completely redesigned locking system with
tubular key.
• Smooth and quiet rolling premium 5”x 2”casters
with precision sealed bearings and 360º top brake
• Chrome plated cast drawer handles
• Drawer liners included on all models
• Dual metal rear drawer locking hook for
positive locking
• Automotive style powder coat paint finish for
superior scratch and chemical resistance
A
C
B
26 x 18-3/4 x 21
11 Drawer Roller Cabinet - PRO+ Series
26-1/2 x 19 x 42
5 Drawer Roller Cabinet - PRO+ Series
26-1/2 x 19 x 36
26 Tool Top Chest
26 Rolling Tool Cabinets
GRY 93120
$
84999
GRY 93211
$
121999
GRY 93250
$
88499
• All drawers feature ball bearing slides for smooth
operation
• Easy to clean powder coat paint finish
• Drawer liners included
• Needle bearing casters with 360º brake
• Heavy-duty steel construction
• Load capacity per drawer is 88 lbs
• Net weight: 129 lbs
operation
operation
• Needle bearing casters with 360º brake
GRY D069201
$
74199
GRY D069204
$
75999
GRY D069203
$
122999

WORKFORCE™ SERIES
1/2 AIR IMPACTS
1/2 AIR IMPACTS
CP 1/2 Extreme Torque Impact Wrench
CP 1/2 Lightweight Impact
CP 3/4 Air Impact
CP 1/2 General-Duty Impact
AIR TOOLS
CP 3/8 Reversible Angle Air Drill
• Compact,low profile head for confined areas
• Reverse valve for easy directional changes
• Teasing throttle for control from
start-up through run-down
Free Speed: 1,800 RPM
CP CP879
$
14889
• Differential regulator matches the
required power to the job
• Imported oil bath DynaPact™
clutch.
Ultimate Torque: 425 ft.-lbs.
CP CP734H
$
21899
CP 1/2 Super-Duty Impact
• Oil bath Spring Hammer clutch mechanism for
ultimate power, high durability and reduced vibration
• One hand push button forward/reverse power regulator
• Differential regulator with four positive power settings in forward
and ultimate power in reverse
CP CP749
$
28999
• Composite housing features an aluminum back cap support
• Thermoplastic rubber injected grip for comfort and durability
CP CP7748
$
25189
• Lightweight, only 3.95 lbs. and
Compact size, 6.7
• Powerful with 955 ft.-lbs. of working
torque
• Comfortable, curved rubber
injected thermo plastic handle
• Features a power setting system with
1-hand operation behind the trigger
CP CP7749
$
29989
• Powerful performance and
durability in a compact package
• Twin hammer clutch for
power and durability
Ultimate Torque: 1,200 ft.-lbs.
CP CP7763
$
56999
COMPACT AIR IMPACTS
CP Compact Stubby Impacts
CP Ultra Compact Stubby Impacts
• Compact and powerful at only 2.9 lbs.
• 4.4 in length
• Power and durability at 9,000 RPM
• 3 power settings in
forward reverse
• Easy one-handed operation
3/8 Maximum
Torque: 345 ft.-lbs.
CP CP7731C
• Compact and powerful at only 2.2 lbs.
• Power and durability at 9,000 RPM
• 4 power settings in forward reverse
• Easy one-handed operation
• 4.3 in length
3/8 Ultimate
CP CP7731
1/2 Ultimate
CP CP7732
YOUR CHOICE
$
19889
1/2 Maximum
CP CP7732C
YOUR CHOICE
$
19889
EACH
EACH
Carquest®
1/2 Heavy-Duty Impact
• Twin hammer clutch
• Force feed lubrication
• Cushion grip
• Variable speed trigger control
• Adjustable power regulatorUltimate Torque: 425 ft.-lbs.
EQP 7418
$
17689
ProValue™
1/2 Impact
• Features durable swinging weight clutch mechanism
EQP 2374-PV
$
11189
3/4 AIR IMPACTS
CP 3/4 Heavy-Duty Impact
• One-hand push button forward/reverse regulator
• Comfortable contoured handle grip
CP CP772H
$
52999
CP 3/4 Air Impact
• Includes ring retainer plus additional hole retainer
• Lightweight composite housing
• Simple one handed forward reverse switch (S2S)
CP CP7769
$
66999
Flexzilla®
1/2 Pro Mini Impact Wrench Kit
• Includes Flexzilla Pro Mini Impact Wrench, field repairable
3/8 x 50' Flexzilla Pro Air Hose, and
Flexzilla High Flow Couplers and Plugs
• 800 ft-lbs. of breakaway torque and lightweight,
compact design
LEG AT8505FZ
$
35999
DeWALT®
1/2 Heavy-Duty Air Impact Wrench
• One-hand operation-forward/reverse switch
• Shock resistant housing bumpers help prevent scuffing
SBD DWMT70773L
$
24999
DeWALT®
1/2 Medium-Duty Air Impact Wrench
• Heavy duty twin-hammer mechanism
• Composite body with shock resistant housing
bumpers to prevent scuffing
• Adjustable power regulator
SBD DWMT70774
$
16825
NEW
AirTools

WORKFORCE™ SERIES
AIR TOOLS
ProValue™
3/8 Air Ratchet
CP 3/8 Heavy Duty Ratchet
3/8 AIR RATCHETS
• Ergonomic square handle for positive
comfort grip
• Teasing throttle for precise speed
control
• Free Speed: 160 RPMMaximum Torque: 60 ft.-lbs.
EQP 2328-PV
$
7589
• Features anti-slip head design • Compact design weighing 1 lb.
CP CP828
$
17689
ProValue™
Rear Exhaust Die Grinder
AIR GRINDERS
AIR GRINDERS
CP Compact Angle Die Grinder
CP Standard-Duty Die Grinder
• Excellent for tire scuffing, cleaning tire moulding, and
general high-speed polishing and grinding
CP CP872
$
9189
• Standard safety lever • Variable speed throttle control
EQP 2320-PV
$
4589
• Complete with 1/4 6mm collet • Built-in air regulator
CP CP875
$
8999
CP Pistol Grip Air Hammer
3,000 Blows Per Minute
CP CP7111
$
8489
CP Air Hammer Kits
• Both include a heavy-duty pistol grip air hammer,
standard .401 round shank, with teasing trigger for slow start-up
• Moulded case
CP7150K with 5 Chisels
CP CP7150K
$
11299
CP7110K with 4 Chisels
and Posi-Lock Retainer
CP CP7110K
$
14189
• Standard .401 round shank
• Easy change retainer for
quick accessory change
• Touch trigger for
precision start and
total control
CP860 Heavy-Duty Die Grinder
• Features an energy-efficient 1/2 hp motor
• Rear exhaust directs air away from work
• Square handle design for positive grip
• Complete with 1/4 6mm collet
CP CP860
$
20739
CP Mini Straight Die Grinder
• Features an easy access speed control and
insulated grip
CP CP9105Q-B
$
11789
CP Mini Angle Die Grinder
• Powerful 1/4-HP die grinder with
rear exhaust
• Easy access speed regulator
CP CP9106Q-B
$
12189
CP 120° Angle Die Grinder
CP CP9108Q-B
$
14389
CP 1/4 Drive Standard Duty Ratchet
• Square handle design for positive grip
• Durable improved ratchet head with a convenient forward/reverse
button for easy operation
• Ball-type socket retainer for positive retention
Maximum Torque: 15 ft.-lbs.
CP CP825
$
19999
Carquest®
Gearless Angle Die Grinder
• 1/4 Collet capacity • Tool accepts 1/4 3mm
and 6mm arboursFree Speed: 25,000 RPM
EQP 7446
$
8499
Carquest®
Angle Die Grinder
• Features a teasing throttle with built-in power regulator
EQP 7448
$
8189
AIR HAMMERS
ProValue™
Heavy-Duty Air Hammer
ProValue™
4-Piece Heat Treated Chisel Set
EQP 2550-PV $21.89
• Accepts all standard .401 shank
tool bits
• Independent power regulator and
teasing trigger for operator control
EQP 2375-PV
$
3189
Flexzilla®
Pro Reactionless Mini Air Ratchet Kit
• Includes 3/8 Flexzilla®
Pro Reactionless MiniAir Ratchet,Flexzilla®
Pro Custom Length
Whip Hose with High Flow Ball Swivel,and Flexzilla®
Pro High Flow Couplers and Plugs
• Built-in air regulator and rear exhaust
• High speed: 650 RPM
•Torque: 45 ft-lbs
LEG AT8535FZ
$
20999
CP Heavy Duty Extended Grinder
• Highly efficient and powerful • Ideal for limited space applications
• High operator comfortFree Speed: 28,000 RPM
CP CP9110Q-B
$
13999
1/4 DeWALT Straight Die Grinder
• Self-locking touch control trigger with
cushion grip body
SBD DWMT70783
$
6249
NEW

WORKFORCE™ SERIES
PLEWS®
BLOW GUNS
Tru-Flate 1/4 FNPT Input Safety Blowgun
• Oil resistant, soft rubber tip seals tight and
won’t mar finishes
• With safety nozzle nozzle connected,
limits air pressure to 30 psi
CPM 18-215
$
629
Plastic Pistol Grip Blowgrun
• Lightweight plastic
with ergonomic design
• Brass valving and
bushing ensure long life
CPM 18-325
$
329
MILTON®
BLOW GUNS
Siphon Spray Blow Gun Kit
• 1/4 national pipe thread air inlet
• Maximum working pressure of 150 PSI
• 14 standard cubic feet per minute at 100 PSI
• Buna-N seal
MIL S157
$
2699
1/4 NPT Lever Style Blow Gun
4' Extension
CPM 18-219
$
5450
2' Extension
MIL 158
$
3299
AIR TOOLS
DeWALT Air Chisel Hammer
• Medium barrel design with shock resistant
housing bumpers and ergonomic handle
• Comes with an assortment of chisels
SBD DWMT70785
$
6249
NEW
AIR HAMMERS
CP Dual Action 6 Air Sander
• Rotary and orbital motion for rapid removal as well as fine finishing
Max RPM: 10,000
CP CP870
$
9389
CP Heavy Duty Dual-Piston In-line Sander
• Twin piston for smooth balanced power
• Power to prevent stalling during heavy material removal
• CP Pinch guard for safe operation
Free Speed: 3000 strokes per minute
CP CP7268
$
16989
AIR SANDERS
CP 7200-S Mini Random Orbital Sander Kit
• Kit includes CP7200 random orbital sander, (1) 2 and 3
backing pads, (10) 2 320, 400 and 600 grit sand paper,
(10) 3 320, 400 and 600 grit sand paper and spindle key
CP CP7200S
$
15999
CP7255 6 Random Orbital Air Sander
• Powerful .28 HP motor
• Teardrop handle for great control
• Low vibration
• Easy access speed control
CP CP7255
$
23789
AIR NEEDLE SCALERS
CP Mini Polisher Kit
• Kit includes mini disc polisher plus (1) 3 backing
pad, (2) 3-1/2 foam compounding pads (white/
yellow), (1) 3-1/2 wool buffing pad and spindle
wrench packed in a heavy-duty carrying case
CP CP7201P
$
18189
CP Needle Scaler
• Adjustable for easier operation
• Durable and versatile for vehicle and manufacturing
equipment maintenance
• Ideal tool for material removal on medium to large surfaces
4,000 Blows Per-Minute
CP CP7125
$
26969
Socket Retainer Ring
CP CA088097 $5.69
Airolene Oil 591 mL
CP CA000046 $11.89
AIR RECIPROCATING SAWS
Contractor Bi-Metal Blades
6TX6
CPE 07606 $3.99
18TX6
CPE 7618 $2.99
24TX6
CPE 07624 $5.89
High Speed Steel Blades
14TX4
CPE 07814 $2.99
18TX6
CPE 07865 $2.49
24TX6
CPE 07866 $2.99
CENTURY®
Reciprocating Saw Blades
RECIPROCATING SAW BLADES
CP Heavy-Duty Reciprocating Saw
• Compact and lightweight for all general cutting
• Adjustable guard guide
• Includes 18T, 28T, 32T replacement blades
• 3/8 stroke length
CP CP7900
$
18449
Flexzilla®
Pro Reciprocating Mini Air Saw Kit
• Includes Flexzilla®
Pro Reciprocating Mini Air Saw, Flexzilla®
Pro Custom Length Whip Hose with High Flow Ball Swivel,
and Flexzilla®
Pro High Flow Couplers and Plugs
• Compact design with low vibration
• High Speed: 9500 SPM
LEG AT8565FZ
$
22999
• Maximum working pressure of 150 PSI
• Safety nozzle offers 10.5 SCFM @ 100 PSI
• Rubber tip offers 11.6 SCFM @ 100 PSI
AirTools

FINANCE IT
FINANCE IT
Milton®
1/4 NPT Polycarbonate
Mini Piggyback FR Duo
• 1/4 national pipe thread
• Maximum 20 standard cubic feet per minute
• Operating temperature range of 40 degrees
Fahrenheit to 120 degrees Fahrenheit
• Maximum working pressure up to
150 pounds per square inch
• Polycarbonate bowl
MIL S1142
$
7999
MILTON®
NPT FRL
REGULATORS
• Relieving type and offers a stable downstream air pressure
over a wide range of air flows with accurate control, fast
response time and minimal pressure drop
• Maximum inlet pressure of 250 PSI and offers up to 50 SCFM
• Maximum of 50 (1113),80 (1114) and 100 (1115) std.cubic
feet per minute at 100 PSI
1/4
MIL 1113
$
5999
1/2
MIL 1115
$
6999
3/8
CPM 24-414
$
12043
MILTON®
NPT MINI PRESSURE
REGULATORS
1/4
MIL S1146
$
4539
Heavy Duty
1/4
MIL S1145
$
3999
3-Gallon
Light-Duty Air Compressor
Oil Free, Low Maintenance Operation - 120 Volt
- UL CSA Certification ASME Certified Tanks
(3 to 20-Gallon) Great for Home DIY Projects!
Toll Free Help Line 1-888-895-4549
Toll Free
Help Line
1-888-895-4549
1 Year Limited
Warranty
Residential Use
• 125 Max PSI
• 1.0 RHP
• 3.0 CFM@40 PSI
• 2.0 CFM@90 PSI
• Air Pressure Regulator,
Gauges Quick-Connect
COM VPP1080318
$
18999
90 Day Limited
Warranty
Commercial Use
MEDIUM-DUTY AIR COMPRESSORS
Cast Iron - Twin Cylinder - Belt Drive - Oil Lubricated - Oil Level Sight Glass - ASME Certified Tanks
20-Gallon
• 135 Max PSI
• 1.6 RHP
• 6.2 CFM@40 PSI
• 5.3 CFM@90 PSI
• 120/240
Dual Volt
• Air Pressure
Regulator,
Gauges and
Quick-Connect
COM PP1682066.MN
$
64999
30-Gallon
• 155 Max PSI
• 1.6 RHP
• 6.2 CFM@40 PSI
• 5.3 CFM@90 PSI
• 120/240 Dual Volt
• Air Pressure
Regulator, Gauges
Quick-Connect
COM PLA1683066
$
80999
60-Gallon
• 155 Max PSI
• 3.7 RHP
• 13.4 CFM@40 PSI
• 11.5 CFM@90 PSI
• 240 Volt
COM PLA3706056
$
86989
On All
Medium-
Duty
Compressors
2 Year
Limited
Warranty
Residential Use
90 Day
Limited
Warranty
Commercial Use
AIR COMPRESSORS
Voltage Codes
1 = 115/60/1
3 = 230/60/1
21 = 115/230/60/1
43 = 208/230/60/3
45 = 460/60/3
69 = 575/60/3
77 = 208/230/460/60/3
MS = Magnetic Starter
ASME Approved Air Receivers, Cast Iron Compressor
Pump,Totally Enclosed OSHA Belt Guard, Unloaded
Starting, Ball Valve Air Outlet, Splash Lubrication
2-Year Warranty
SDI - STANDARD DUTY
INDUSTRIAL AIR COMPRESSORS
* Contact your local store
for pricing and availability
* Contact your local
store for pricing
and availability
Line Code Item Number SCFM @ Max. Pressure HP Voltage/Phase
Tank Capacity (Gallons)
H (Horiz.) V (Vertical)
DVR IS5-10080H-03 18 SCFM @ 150 PSI 5 HP 230/60/1 80G H
DVR IS5-10080V-03 18 SCFM @ 150 PSI 5 HP 230/60/1 80G V
DVR IS5-4060-03 13 SCFM @ 125 PSI 5 HP 230/60/1 60G V
DVR IS5-5580-03 15.4 SCFM @ 150 PSI 5 HP 230/60/1 80G V
DVR IS7-10080-03 22.7 SCFM @ 150 PSI 7.5 HP 230/60/1 80G V
DVR IS7-100120-03 22.7 SCFM @ 150 PSI 7.5 HP 230/60/1 120G H
DVR IS10-100120-69 31 SCFM @ 150 PSI 10 HP 575/60/3 120G H
7-Year Warranty
HDI - HEAVY-DUTY
INDUSTRIAL PISTON AIR COMPRESSORS
Line Code Item Number CFM@ 150 PSI HP Voltage/Phase
Tank Capacity (Gallons)
H (Horiz.) V (Vertical)
DVR TAPV-5052-03MS 19.8 CFM 5 HP 230/60/1 80G V
DVR TAPV-5052-69MS 19.8 CFM 5 HP 575/60/3 80G V
DVR TAS-5052-03MS 25.9 CFM 7.5 HP 230/60/1 80G H
DVR TASV-5052-03MS 25.9 CFM 7.5 HP 230/60/1 80G V
DVR VAV-5062-69MS 52.1 CFM 15 HP 600/60/3 120G H
Available with or without
mounted and wired
magnetic starter. Optional
constant RUN-STOP-START
controls. Duplex and other
custom products available.
Gas Powered Air Compressor
DVR TASE-5030 25.9 CFM 13 HP Gas 30G H
gage ports
• Low Pressure
• Maximum
inlet pressure of 250 PSI
• 25 standard cubic feet per
minute

WORKFORCE™ SERIES
WORKFORCE™ SERIES
AirCompressors
AIR HOSE REELS
Flexzilla®
Open Face, Retractable Air Hose Reel with Hose
• Features all steel construction and a multi-position guide arm
• Four-way direction rollers allows the hose to be easily pulled from the reel
3/8 x 50', 1/4 NPT
LEG L8611FZ
$
30999
3/8 x 50',
1/4 NPT
CPE 31678
$
3189
3/8 x 25',
1/4 NPT
CPE 31677
$
2589
1/4 x 25',
1/4 NPT
CPE 31675
$
1799
Carquest®
Heavy-Duty Rubber Air Hose Max 200 PSI
1/4 x 25', 1/4 NPT
CPE 31660
$
1999
3/8 x 25', 1/4 NPT
CPE 31662
$
3099
1/4 x 50', 1/4 NPT
CPE 31661
$
4599
1/2 x 25', 1/2 NPT
CPE 31664
$
3999
1/2 x 50', 1/2 NPT
CPE 31665
$
7349
3/8 x 50', 1/4 NPT
CPE 31663
$
5189
Carquest
®
Professional Rubber Air Hose Max 250 PSI
FLEXZILLA
®
AIR HOSES
3/8 x 25', 1/4 NPT
LEG HFZ3825YW2
$
2989
• Flexible hybrid polymer material, extreme all-weather flexibility
(-40° to 140°F), won't kink under pressure
1/2 x 50', 3/8 NPT
LEG HFZ1250YW3-N
$
8989
3/8 x 50', 1/4 NPT
LEG HFZ3850YW2-N
$
6689
3/8 x 25', 1/4 NPT
LEG HFZP3825YW2
$
5189
Flexzilla®
Pro Air Hoses
• Field repairable – Reusable anodized aircraft aluminum fittings
• Extreme all-weather flexibility (-40° to 140°F)
3/8 x 50', 1/4 NPT
LEG HFZP3850YW2
$
7899
LINCOLN®
ALL-STEEL HOSE REELS
• Features: all steel construction,
spring-powered automatic recoil,
5-position adjustable outlet arm
• 8-position ratchet gearing
locks the reel at the desired hose
length
• Ball stop included
50' x 3/8
LIN 83753
$
19299
50' x 1/2
LIN 83754
$
21779
ZillaReel™
PRO with Levelwind™
• Features a Latching Mode Switch which allows user to choose
from latching the hose every 3 ft.or switching to free run
• Includes a 7-position locking bracket
PRO 3/8 x 75', 1/4 NPT
LEG L8306FZ
$
37999
MILTON®
AIR PRESSURE GAUGES
Dual Head Chuck Service Gauges
• Plated brass tube and 4-sided nylon indicator bar
• Max pressure of 160 PSI
MIL S976
$
2899
MIL S986
$
3299
CARQUEST®
AIR HOSES
Straight Head Bayonet Style
• 1/4 NPT with white nylon indicator bar
• 12 hose with 10 - 120 PSI
• Hose whips are interchangeable with Milton bayonet gauge
MIL S520
$
5959
3/8 x 25', 1/4 NPT
LEG HWF3825BL2
$
2499
3/8 x 50', 1/4 NPT
LEG HWF3850BL2
$
3759
1/4 x 25' 1/4 NPT
LEG HWF1425BL2
$
2499
1/4 x 50'1/4 NPT
LEG HWF1450BL2
$
3689
LEGACY WORKFORCE®
BLUE PVC AIR HOSE
• Oil and abrasion-resistant outer cover
• Temperature range 15° to 150°F
• Twin spiral braiding
• Corrosion resistant brass fittings
• 350 Max PSI
PRO 3/8 x 50', 1/4 NPT
LEG L8305FZ
$
30999
• Automatically layers hose back
and forth across the reel and
the Latching Mode Switch
allows user to choose from
latching the hose every 3 ft. or
switching to free run
• Includes a 7-position locking
bracket
• Can also be portable with
the built-in handle and free-
standing base
• 350 PSI working pressure
• 3 ft. lead-in hose is
included
• Made from durable UV
stabilized polypropylene
LEG L8310
$
30999
LEGACY™ LEVELWIND™
3/8 x 100' Retractable Air Hose Reel with PVC Hose Included
ZILLA™AIR HOSES REELS
Flexzilla®
Enclosed Plastic Retractable
Air Hose Reel with Hose
•Auto Retract/Latch Hose Mechanism - Simplifies every
job by keeping excess hose out of the work space
3/8 x 50', 1/4 NPT
LEG L8250FZ
$
17489
• Comes pre loaded with Premium FLEXZILLA®
air hose.
Inflator Gauges
• Full swivel chuck with 15 hose • Range: 10—160 PSI
Dual Head Chuck
MIL S506
$
5999
Straight Foot Dual Head Chuck
MIL S516
$
6499
Dual Head Chuck Bayonet Style
MIL S522
$
4999
MILTON®
NPT FRL MICRO FILTERS
• Includes a porous bronze sintered 40 micron filter element
• Maximum pressure of 150 PSI
• Install upstream from regulators
• Maximum of 48 std. cubic feet per minute at 100 PSI
1/4 Polycarbonate
MIL 1018
$
5699
3/8 Polycarbonate
MIL 1019
$
5699
1/2 Polycarbonate
MIL 1020
$
6999
PLEWS®
COUPLERS AND AIR CHUCK
Couplers
1/4 ARO 1/4 MNPT
Coupler
CPM 13-324 $11.99
1/2 T-Style 1/2 FNPT
Coupler
CPM 13-713 $10.99
Ball Foot
Air Chuck
CPM 17-353
$6.89

FINANCE IT
PLEWS®
AIR HOSE PLUGS AND FITTINGS
Plugs
1/4 MNPT 1/4 I/M Plugs
2 Pack
CPM 12-225-2 $3.29
1/4 FNPT 1/4 I/M Plugs
2 Pack
CPM 12-235-2 $3.29
1/4 FNPT
1/4 ARO Plugs 2 Pack
CPM 12-335-2 $3.29
1/4 MNPT 1/4 ARO Plugs 2 Pack
CPM 12-325-2 $3.39
HI FLO®
1/4 MNPT Plugs 10 pack
CPM 12-924 $2.99
1/4 T Style 1/4 MNPT Plugs 2 Pack
CPM 12-125-2 $3.39
3/8 T Style 3/8 MNPT Plugs 2 Pack
CPM 12-603-2 $3.39
Hose Fittings
Barb, 1/4 ID x 1/4 MNPT
CPM 21-123 $2.29
1/4 ID Hose Splicer
CPM 21-423 $2.99
3/8 ID Hose Splicer
CPM 21-467 $2.99
POWER TOOLS
POWER IMPACTS
POWER GRINDERS
Milwaukee®
M18 FUEL™
1/2 High Torque
Impact Wrench
With Friction Ring Kit
• Kit includes: M18 1/2 High Torque
Impact Wrench, (2) REDLITHIUM™
batteries and M18/M12 Dual
Voltage Charger
• Up to 1,400 ft-lbs. of nut-busting torque
• Features friction ring to ensure
quick and easy socket changes
• 4-mode drive control with bolt
removal mode
MLK 2767-22
$
71428
ITC®
Heavy-Duty 1/2 Electric Impact Wrench
• Motor: 120V, 7 Amps
• 4 impact sockets: 11/16, 3/4, 13/16 and 7/8
• Impact rate: 2700 BPM
• Maximum torque: 230 ft/lbs
JET 011903
$
16999
Milwaukee®
M18 FUEL™
ONE-KEY™
High
Torque 3/4 Impact Wrench
ONE-KEY™
High Torque 3/4 Impact Wrench,
(2) M18™
RED LITHIUM Extended Capacity Batteries, Multi-Voltage
Charger and Hard Case
• Delivers up to 1200 ft/lbs of fastening torque, 1500 ft/lbs of nut-
busting torque
• ONE-KEY™
technology allows users to customize, track and
manage tool’s performance and location
• Friction ring design ensures quick and easy socket changes
MLK 2864-22
$
80356
Milwaukee®
M18 FUEL™
ONE-KEY™
High
ONE-KEY™
High Torque 1/2
Impact Wrench, (2) M18™
RED LITHIUM Extended
Capacity Batteries, Multi-Voltage Charger and Hard Case
• Delivers up to 1000 ft/lbs of fastening torque, 1
400 ft/lbs of nut-busting torque
• ONE-KEY™
technology allows users to customize, t
rack and manage tool’s performance and location
MLK 2863-22
$
78035
Milwaukee®
M18 FUEL™
ONE-KEY™
High
With Friction Ring
• Delivers up to 1200 ft/lbs of fastening torque, 1500 ft/lbs of
nut-busting torque
• ONE-KEY™
technology allows users to customize, track and
manage tool’s performance and location
MLK 2864-20
$
47053
NEW
NEW
NEW
NEW
DeWALT®
4-1/2 Small Angle Grinder
With One-Touch™
Guard
• Includes 2-position side handle
and depressed centre wheel
• One-Touch™
Guard and hex wrench
• No Load Speed
of 12,000 rpm
• 7.0 AC/DC Amps
SBD DWE4011
$
10095
ITC®
5 Angle Grinder
• Motor: 120 volt, 8 amps
• 5/8-11 tpi arbour.No-load speed: 11,000 rpm
JET 011707
$
8989
ITC®
4-1/2 Angle Grinder
• Motor: 120 Volt, 4.3 Amps. 5/8–11 tpi arbour
No load speed: 11,000 RPM
JET 011704
$
5859
Milwaukee®
1-5/8 Electromagnetic Drill Kit
• Includes 1-5/8 Electromagnetic Drill Kit, Safety Strap,
Lubrication Spray Bottle, Chuck Key, 3/4 Weldon to 1/2
Chuck adapter, (2) 1 retractable pilot pins and Hard
Carrying Case
• 13A motor delivers fast drilling with annular cutters or twist
drill bits
• 2-speed gear box: 475/730 RPM
MLK 4272-21
$
156249
POWER DRILLS
DeWALT®
20V MAX 1/2
Compact Drill Driver Kit
• Includes (1) 1/2 Compact Drill/
Driver, (2) 20V MAX Batteries, (1)
Battery Charger and Contractor Bag
• 2-speed - 450 and 1,500 RPM
• 1/2 single sleeve ratcheting chuck
SBD DCD771C2
$
24038

M18™
RED LITHIUM™
XC5.0 Extended
Capacity Battery Pack
Single Pack
MLK 48-11-1850
$
20535
PowerTools
BENCH GRINDERS
MILWAUKEE®
BATTERY PACKS
NEW
NEW
NEW
NEW
NEW
Milwaukee®
M18 FUEL™
4-1/2/5 Grinder
With Slide Switch Lock-On
• Delivers maximum power and up to 10X longer motor life
• Slide switch reduces user fatigue
• Compatible with all M18 batteries
MLK 2781-20
$
28571
Milwaukee®
M18 FUEL™
4-1/2/5 Grinder
With Slide Switch Lock-On Kit
4-1/2/5 Grinder, (2) M18™
RED
LITHIUM Extended Capacity Batteries, Multi-Voltage Charger, Spanner
Wrench,Wheel Guard, Flange Nuts and Hard Case
• Delivers maximum power and up to 10X longer
motor life
• Slide switch reduces user fatigue
MLK 2781-22
$
62499
POWER GRINDERS
Milwaukee®
M12 FUEL™
3/8 Cordless Ratchet
• Up to 55 ft/lbs max. torque
• Delivers 200 RPM for increased productivity
• Recessed head profile for access in tight spaces
MLK 2557-20
$
25267
DeWALT®
7 / 9 Variable Speed Polisher
with Soft Start
• Powerful 12A motor with electronic control
• Non-mar rubber gear case reduces surface
imperfections
• 1,250 Max Watts Output
• Wool ingestion shield increases tool life
• Comes with Professional Velcro
Polishing Pad
• No Load Speed of 0-600 / 0-3,500
SBD DWP849X
$
36538
Carquest®
7 Variable
Speed Electric Polisher
• Spindle Size: 5/8 - 11,
Variable Speed: 1,000 - 3,000 RPM
EQP 7452
$
16999
POWER TOOLS
DeWALT®
8 Bench Grinder
• 3/4HP 600 RPM induction motor
• Rear exhaust ports in wheel guards
• Cast iron base and housing
• Precision-machined aluminum tool rests
SBD DW758
$
21923
JET®
Heavy Duty Bench Grinder
• Steel wheel covers with rear dust exhaust ports
• Eye shields and spark guards for operator safety
• Includes coarse and medium grinding wheels
• CSA electrics
6” 1/3 HP - JET 240153
$
19299
8” 1/2 HP - JET 240154
$
25799
Two Pack
MLK 48-11-1852
$
30356
M18™
RED LITHIUM™
HIGH
DEMAND™
9.0 Battery Pack
MLK 48-11-1890
$
30356
M12™
RED LITHIUM™
XC6.0 Battery
MLK 48-11-2460
$
14285
HIGH SPEED DRILL BIT SETS
CENTURY®
13-Piece Cobalt Drill Bit Set
• Extremely heat resistant
• Must be used and operated in power units that have a RPM
speed of 1500 or more for maximum efficiency
• Includes: 1/16 - 1/4 bits
CPE 26513
$
4789
CENTURY®
135° Quick Cut Points
21-Piece High Speed Bit Set
CPE 88721
$
3589
29-Piece High Speed Bit Set
CPE 88729
$
7789
• Self-centreing
• Penetrate faster with less pressure
• Will not walk or wander at
the starting surface
CENTURY®
5-Piece Left Hand Drill Bit Set
• Includes 1/8 to 3/8
• Stubby mechanics length drill bit for additional strength
CPE 74105
$
1999
CENTURY®
Cobalt Drill Bits
1/8
CPE 26408 $2.89
3/16
CPE 26412 $3.89
1/4
CPE 26416 $4.89
M18™
RED LITHIUM™
XC5.0 Starter Kit
• Includes M18™
REDLITHIUM™
XC5.0 Extended
Capacity Battery and Multi-Voltage Charger
MLK 48-59-1850
$
26785
DeWALT®
18/20V MAX
Cordless/Corded Wet-Dry Vac
• HEPA rated wet/dry filter traps dust
with 99.97% efficiency at 0.3 microns
• 2-gallon capacity wet or dry
• Includes on-board hose,cord and
accessory storage
SBD DCV581H
$
20191

Electronic Supplies Professional
Infrared Thermometers
EST-65
• Reads surface temps up to 1022° F and 550° C
• Built-in laser pointer and backlit LCD display
• Resolution is 0.1 degrees
• Includes carrying case.
ESI EST-65
$
9999
EST-67
• Features a twin laser aiming system for more accurate
results - lasers converge at optimum measuring distance
• Reads temps up to 1112° F and 600° C
• Includes carrying case.
ESI EST-67
$
9869
Infrared Thermometer
MTP-1325
• Single laser targeting
• Automatic data hold, auto power off
• White backlit LCD display
• Range of -50 to 450°C (-58 to 842°F) and ratio of 12:1
MTP MT1325
$
11299
INFRARED THERMOMETERS
MULTIMETERS
Electronic Specialties Deluxe
Automotive Meter
• Includes two sets of test leads, RPM pick-up,
temperature probe and soft storage case
• Features analogue bar graph,12 testing
functions and 45 test ranges
•Auto-ranging on DC/ACVolts and Ohms.
ESI 585K
$
11999
Automotive Hybrid Multimeter Kit
• New Hybrid safety voltage standard 1000V CAT III
• Measurement functions include, DC / AC Voltage, DC / AC Current (up to 20A),
Resistance, Dwell Angle, Frequency, Capacitance, RPM (TACH), Duty Cycle,
Temperature (k), and Pulse Width
MTP MT1551
$
17999
OTC®
1000V CAT III Hybrid Multimeter
• Full function Multimeter with an insulation test feature is used to test for
voltage leaks through insulation found on Hybrid and ElectricVehicles
• Features: Hybrid Insulation Resistance Test,True RMS,Auto Ranging,
Diode Test, Continuity Buzzer, Data Hold and Logging, Display Backlight,
Min/Max and Sleep Mode, Low Battery Display
• Kit Includes: Heavy-Duty Class III test leads with alligator clips, short
lead, K type temperature adapter and manual
OTC 3990
$
36999
Non Contact A/C Voltage Sensor
MTP MTPVT-6
$
1479
• Very bright LED and buzzer alarm informs you
that voltage is present
• Detects A/C voltage without connecting into
the wire circuit
• Ideal for electrical troubleshooting, detecting
a live A/C source and locating a burned-out
bulb in a series
• 90-240 Volts AC/CA 50-60 Hz.
Tachometer Contact/Non-Contact
MTP MTAT8
$
18139
Relay Buddy 12/24
• Tests both 12V and 24V
relays in 10 seconds
• Just plug in the relay and
press the test button - green
light for pass,red light for fail
• If relay fails, one of 3 trouble
codes is displayed
• Switch contacts are loaded to
detect excessive resistance
• Quick off-the-car relay tester
ESI 192
$
7999
Carbon Monoxide Detector
MTP MTCO180
$
29079
OTC®
Fuel Injection Pulse Tester
• Check cylinder balance by firing individual injectors at 1/2-second
increments in (3) different ranges: 1 pulse of 500 milliseconds, 50 pulses
of 10 milliseconds, 100 pulses of 5 milliseconds.
• Power and output lights indicate test activation
• Includes wiring harness adapter and instructions
OTC 3398
$
17999
DIAGNOSTIC TOOLS
AC/DC CLAMP METERS
AC Clamp Meter
400A AC
MTP MTP3093
$
11459
AC/DC Clamp Meter
400A AC/DC
Both units feature:1.2
Clamp opening, 4000 count
digital LCD display, data
hold, REL (zero) function
auto power off.
TRMS AC Clamp Meter
AC True RMS, 1000A AC
MTP MTP3095
$
18999
TRMS AC/DC Clamp
Meter AC/DC True
RMS 1000A AC/DC
MTP MTP3096
$
24999
Both units feature: 1.5 clamp
opening, max/min, data hold,
REL (zero) function,6000 count
digital LCD display with back-light
Analogue bar graph (61 seg.).
MTP MTP3094
$
19499
OTC®
AMP CLAMPS
Mid- and High-Range
• Test charging current and starting current draw
• 31mm clamp diameter fits most vehicle applications
• 0-200A, 0-1000A Measurement ranges; 1mV/A output.Accuracy:
± 1% of reading ± 500mA. Resolution: 100mA
• Power: Internal, replaceable 9V battery, low battery indicator
• 0-200A 0-1000A measurement ranges; 1mV/A output
OTC 3174
$
28999
Low Amp Clamp
• 0–60 Amp range, measures to 90 Amp, 100mV/A
• High accuracy, and low noise interference
• Non-intrusive AC/DC current measurement
• Resolution: 10mA average responding, RMS calibrated
• Includes display for use without a multimeter
OTC 3820-13
$
32999

Auto Tools Fyler – CarQuest – PetesPaint.ca – Q1 2019

Auto Tools Fyler – CarQuest – PetesPaint.ca – Q1 2019

Recommended

Recommended

More Related Content

Similar to Auto Tools Fyler – CarQuest – PetesPaint.ca – Q1 2019

Similar to Auto Tools Fyler – CarQuest – PetesPaint.ca – Q1 2019 (20)

More from Petes Paint & Auto Parts

More from Petes Paint & Auto Parts (20)

Recently uploaded

Recently uploaded (20)

Auto Tools Fyler – CarQuest – PetesPaint.ca – Q1 2019