Atmel SAMA5D3 Development Boards and CPU Modules
•
1 like•87 views
This documentation introduces MYIR's development boards and CPU Modules based on Atmel's SAMA5D3 ARM Cortex-A5 processors, capable of running Linux and Android and can work in harsh environment supporting -40 to +85 Celsius extended temperature operation for industrial embedded applications.
Report
Share
Report
Share
Download to read offline
Recommended
MYC-YF13X CPU Module - STM32MP135 based SoM
The MYC-YF13X CPU Module Overview gives introduction of the STM32MP135 processor based System-on-Module from MYIR, a Chinese company focused on providing SoM solutions for embedded appilcations. Measuring only 37mm by 39mm, the MYC-YF13X module has integrated the STM32MP135DAF7 processor, DDR3L, external memory and carried out a variety of peripheral and IO signals through the 1.0 mm pitch 148-pin Castellated-Hole expansion interface. It is capable of running Linux and provided with software resources including kernel and driver source code, together with detailed user manual and documentations to help customer start their development rapidly. It is particularly suitable for applications such as entry-level industrial human-machine interfaces (HMI) and embedded devices for energy and power management.
MYIR also provides the MYD-YF13X Development Board as a starter kit for evaluating the MYC-YF13X CPU Module. It has a versatile base board to facilitate the expansion from the MYC-YF13X through the 1.0 mm pitch 148-pin stamp-hole (Castellated-Hole) interface, a rich set of peripherals and interfaces have been brought out such as RS232, RS485, two USB 2.0 HOST and one USB 2.0 OTG, two Gigabit Ethernet, CAN, one Micro SD card slot, one USB based Mini-PCIe 4G Module interface with one SIM card holder, LCD interface, Camera interface, Audio input and output as well as two extension headers.
More information about the MYC-YF13X CPU Module can be found at:
https://www.myirtech.com/list.asp?id=726
MYD-YT507H Development Board Overview
The MYD-YT507H Development Board consists of a compact CPU Module MYC-YT507H and a base board to provide a complete evaluation platform for ALLWINNER T507-H Processor which among Allwinner T5 series with a 1.5GHz quad-core Cortex-A53 CPU and a Mali-G31 MP2 GPU. The processor is AEC-Q100 certified and targets the new generation of automotive markets. Typical applications are power IoT, automotive electronics, commercial display, industrial control, medical devices, intelligent terminals and more others.
The MYD-YT507H has a base board which installed MYC-YT507H CPU Module through 1.0mm pitch 222-pin stamp-hole (Castellated-Hole) interface. The MYC-YT507H CPU Module is a highly-integrated SoM which combines the ALLWINNER T507-H processor, 1GB/2GB DDR4, 8GB eMMC, 32Kbit EEPROM and PMIC. The base board is explored with Serial ports, one Gigabit Ethernet and one 10/100M bps Ethernet, two USB 2.0 HOST and one USB 2.0 OTG, one TF card slot as well as a USB based 4G Mini PCIE interface. It has a DVP camera interface and a MIPI-CSI interface to allow connecting with camera modules. It also supports multi video output interfaces such as dual LVDS, HDMI and CVBS OUT, to achieve different display in dual screens.
The MYD-YT507H Development Board is delivered with one Quick Start Guide, one USB cable, one 12V/2A power adapter and one DC power jack adapter to provide user a complete platform for evaluating and prototyping based on T507 processor. MYIR also offers MY-CAM002U USB Camera Module, MY-CAM011B DVP Camera Module, MY-CAM003M MIPI Camera Module, MY-WIREDCOM RPI Module (RS232/RS485), MY-WF005S WiFi/BT Module and MY-LVDS070C LCD Module as options for the board which have greatly enhanced the functionality of the board.
The MYD-YT507H is running Linux OS. MYIR provides abundant software resources for Linux 4.9 based MYIR MEasy HMI V2.0 system with QT5.12.5, Ubuntu 18.04.5 system, including kernel, driver source codes and compilation tools to enable users to start their development rapidly and easily.
MYC-YT507H CPU Module Overview
Measuring only 43mm by 45mm, the MYC-YT507H CPU Module is a compact System-on Module (SoM) based on Allwinner T507-H industrial processor which among Allwinner T5 series with a 1.5GHz quad-core Cortex-A53 CPU and a Mali-G31 MP2 GPU. The processor is AEC-Q100 certified and targets the new generation of automotive markets. Additionally, it has onboard 1GB/2GB LPDDR4, 8GB eMMC, 32Kbit EEPROM and Power management IC (PMIC). SMD packaging is adopted to save connector cost. A variety of peripheral and IO signals are accessible via the 1.0 mm pitch 222-pin stamp-hole (Castellated-Hole) expansion interface. With strong performance, extensive peripheral resources and low cost, the MYC-YT507H can be used in a wide range of applications such as power IOT, automotive electronics, commercial display, industrial control, medical devices, intelligent terminals, and more others.
The MYC-YT507H is running Linux 4.9 with ported Ubuntu 18.04.5 and MYIR MEasy HMI V2.0 system with QT5.12.5, supporting systems with XFCE graphics function. MYIR has provided the software development resources with kernel and drivers all in source code.
MYIR provides MYD-YT507H development board for evaluating the MYC-YT507H CPU Module. It takes full advantages of the Allwinner T5 MPU to explore a rich set of peripherals and interfaces to the base board including Serial ports, one Gigabit Ethernet and one 10/100M bps Ethernet, two USB 2.0 HOST and one USB 2.0 OTG, one TF card slot as well as a USB based 4G Mini PCIE interface. It has a DVP camera interface and a MIPI-CSI interface to allow connecting with camera modules. It also supports multi video output interfaces such as dual LVDS, HDMI and CVBS OUT, to achieve different display in dual screens.
MYD-J1028X Development Board Overview
The MYD-J1028X development board consists ofthe high-performance MYC-J1028X CPU Module and a base board to provide a complete evaluation platform for NXP LS1028A Processor which features dual Arm Cortex-A72 cores,with integrated 3D GPU for HMI, and a time-sensitive networking (TSN) -enabled Ethernet switch and Ethernet controllers to support converged IT and OT networks. Typical applications are industrial router, industrial control, edge computing, automotive electronics, industrial IoT and other scenes requiring high reliability, powerful communication and display capabilities.
The MYC-J1028X CPU Module is an ARM SoM with Layerscape LS1028A SoC, 2G DDR4, 8GB eMMC, 32Kbit EEPROM and a temperature sensor. It is connected to the base board of MYD-J1028X through one 0.5mm pitch 314-pin MXM 3.0 gold-finger-edge-card connector. The base board has brought out rich peripherals through connectors and headers such as 5G Module interface, one M.2 Key B based SSD Module interface,one DP display port, one Audio output port, one Micro SD card slot as well as two SIM card slots and more others.
he MYD-J1028X development board is delivered with one Quick Start Guide, one Type-C cable, one 12V/2A power adapter and one DC power jack adapter to provide user a complete platform for evaluating and prototyping based on LS1028A processor. MYIR also offers MY-CAM002U USB Camera Module and MY-WIREDCOM RPI Module (RS232/RS485/CAN) as options for the board.
The MYD-J1028X is capable of supporting Ubuntu and Real-time Edge images based on Linux kernel. Driver source code and compilation tools are provided to enable users to start their development rapidly and easily.
MYC-J1028X CPU Module Overview
Measuring 45mm by 82mm, the MYC-J1028X CPU Module is a high-performance embedded ARM SoM for industrial and automotive applications. It is based on NXP LS1028A SoC of the Layerscape family and features 1.5 GHz dual Arm Cortex-A72 cores, with integrated 3D GPU for HMI, and a time-sensitive networking (TSN) -enabled Ethernet switch and Ethernet controllers to support converged IT and OT networks. The MYC-J1028X has 2GB DDR4 and supports multiple external memory options including 8GB eMMC (default), QSPI NAND Flash (DNP) and XSPI NOR Flash (DNP). It has 32Kbit EEPROM and one temperature sensor on the rear of the board. A number of peripheral and IO signals are access through one 0.5mm pitch 314-pin MXM 3.0 gold-finger-edge-card connector. It is capable of supporting Ubuntu and Real-time Edge images based on Linux kernel.
The MYD-J1028X Development Board is using the MYC-J1028X as core controller board and has explored the features of the LS1028A processor to serve as an solid reference design for customer’s development. The base board has brought out rich peripherals through connectors and headers such as one USB3.0 Host, five Gigabit TSN Ethernet, one M.2 Key E based WiFi module interface, one USB 3.0 M.2 Key B based 5G Module interface, one M.2 Key B based SSD Module interface, one DP display port, one Audio output port, one Micro SD card slot as well as two SIM card slots and more others.
MYD-YA15XC-T Development Board
The MYD-YA15XC-T development board is using the MYC-YA15XC-T CPU Module as core controller board which is populated on a specially designed base board through 1.0 mm pitch 148-pin stamp-hole (Castellated-Hole) expansion interface. The MYD-YA15XC-T is a good reference design for using ST STM32MP1 Processors which features 650MHz Single or Dual Arm Cortex-A7 and 209MHz Cortex-M4 Cores. Typical applications are industrial control, consumer electronics, smart home, medical and more other energy-efficient applications which require rich performance and low power. More information can be found at:
http://www.myirtech.com/list.asp?id=659
MYC-YA15XC-T CPU Module
Measuring only 39mm by 37mm, the MYC-YA15XC-T CPU Module is MYIR’s another System-on Module (SoM) based on ST STM32MP1 series processors after the first release of the MYC-YA157C CPU Module, The new MYC-Y157XC-T module has integrated the STM32MP151AAC3T processor by default and a dedicated Power Management IC STPMIC1 also from STMicroelectronics. It has onboard DDR3L, Nand Flash or eMMC and 32KB EEPROM. A number of peripherals and IO signals are brought out through 1.0 mm pitch 148-pin stamp-hole (Castellated-Hole) expansion interface to make the module an excellent embedded controller for applications like industrial control, consumer electronics, smart home, medical and etc. The MYC-YA15XC-T is running Linux with provided 5.4.31 kernel and many drivers in source code.
MYS-8MMX Single Board Computer
The MYS-8MMX Single Board Computer has a compact design with only 95mm by 65mm form factor. It is powered by NXP’s first embedded multicore applications processor i.MX 8M Mini which features up to 1.8GHz quad-core ARM Cortex-A53 plus 400MHz Cortex-M4 processor. The tiny board takes full features of the processor and is equipped with 2GB DDR4, 8GB eMMC and 32MB QSPI Flash. It has explored rich peripheral interfaces through headers and connectors including two USB 2.0 Host, one USB OTG, one Gigabit Ethernet, TF card, M.2 interface, LVDS LCD interface, MIPI CSI interface, HDMI output, IO expansion interface and more others. The AP6256 WiFi/BT module on the board also allows wireless communications with other devices. It is capable of running Linux operating system based on the Yocto 3.0 or Ubuntu 18.04 .
Recommended
MYC-YF13X CPU Module - STM32MP135 based SoM
The MYC-YF13X CPU Module Overview gives introduction of the STM32MP135 processor based System-on-Module from MYIR, a Chinese company focused on providing SoM solutions for embedded appilcations. Measuring only 37mm by 39mm, the MYC-YF13X module has integrated the STM32MP135DAF7 processor, DDR3L, external memory and carried out a variety of peripheral and IO signals through the 1.0 mm pitch 148-pin Castellated-Hole expansion interface. It is capable of running Linux and provided with software resources including kernel and driver source code, together with detailed user manual and documentations to help customer start their development rapidly. It is particularly suitable for applications such as entry-level industrial human-machine interfaces (HMI) and embedded devices for energy and power management.
MYIR also provides the MYD-YF13X Development Board as a starter kit for evaluating the MYC-YF13X CPU Module. It has a versatile base board to facilitate the expansion from the MYC-YF13X through the 1.0 mm pitch 148-pin stamp-hole (Castellated-Hole) interface, a rich set of peripherals and interfaces have been brought out such as RS232, RS485, two USB 2.0 HOST and one USB 2.0 OTG, two Gigabit Ethernet, CAN, one Micro SD card slot, one USB based Mini-PCIe 4G Module interface with one SIM card holder, LCD interface, Camera interface, Audio input and output as well as two extension headers.
More information about the MYC-YF13X CPU Module can be found at:
https://www.myirtech.com/list.asp?id=726
MYD-YT507H Development Board Overview
The MYD-YT507H Development Board consists of a compact CPU Module MYC-YT507H and a base board to provide a complete evaluation platform for ALLWINNER T507-H Processor which among Allwinner T5 series with a 1.5GHz quad-core Cortex-A53 CPU and a Mali-G31 MP2 GPU. The processor is AEC-Q100 certified and targets the new generation of automotive markets. Typical applications are power IoT, automotive electronics, commercial display, industrial control, medical devices, intelligent terminals and more others.
The MYD-YT507H has a base board which installed MYC-YT507H CPU Module through 1.0mm pitch 222-pin stamp-hole (Castellated-Hole) interface. The MYC-YT507H CPU Module is a highly-integrated SoM which combines the ALLWINNER T507-H processor, 1GB/2GB DDR4, 8GB eMMC, 32Kbit EEPROM and PMIC. The base board is explored with Serial ports, one Gigabit Ethernet and one 10/100M bps Ethernet, two USB 2.0 HOST and one USB 2.0 OTG, one TF card slot as well as a USB based 4G Mini PCIE interface. It has a DVP camera interface and a MIPI-CSI interface to allow connecting with camera modules. It also supports multi video output interfaces such as dual LVDS, HDMI and CVBS OUT, to achieve different display in dual screens.
The MYD-YT507H Development Board is delivered with one Quick Start Guide, one USB cable, one 12V/2A power adapter and one DC power jack adapter to provide user a complete platform for evaluating and prototyping based on T507 processor. MYIR also offers MY-CAM002U USB Camera Module, MY-CAM011B DVP Camera Module, MY-CAM003M MIPI Camera Module, MY-WIREDCOM RPI Module (RS232/RS485), MY-WF005S WiFi/BT Module and MY-LVDS070C LCD Module as options for the board which have greatly enhanced the functionality of the board.
The MYD-YT507H is running Linux OS. MYIR provides abundant software resources for Linux 4.9 based MYIR MEasy HMI V2.0 system with QT5.12.5, Ubuntu 18.04.5 system, including kernel, driver source codes and compilation tools to enable users to start their development rapidly and easily.
MYC-YT507H CPU Module Overview
Measuring only 43mm by 45mm, the MYC-YT507H CPU Module is a compact System-on Module (SoM) based on Allwinner T507-H industrial processor which among Allwinner T5 series with a 1.5GHz quad-core Cortex-A53 CPU and a Mali-G31 MP2 GPU. The processor is AEC-Q100 certified and targets the new generation of automotive markets. Additionally, it has onboard 1GB/2GB LPDDR4, 8GB eMMC, 32Kbit EEPROM and Power management IC (PMIC). SMD packaging is adopted to save connector cost. A variety of peripheral and IO signals are accessible via the 1.0 mm pitch 222-pin stamp-hole (Castellated-Hole) expansion interface. With strong performance, extensive peripheral resources and low cost, the MYC-YT507H can be used in a wide range of applications such as power IOT, automotive electronics, commercial display, industrial control, medical devices, intelligent terminals, and more others.
The MYC-YT507H is running Linux 4.9 with ported Ubuntu 18.04.5 and MYIR MEasy HMI V2.0 system with QT5.12.5, supporting systems with XFCE graphics function. MYIR has provided the software development resources with kernel and drivers all in source code.
MYIR provides MYD-YT507H development board for evaluating the MYC-YT507H CPU Module. It takes full advantages of the Allwinner T5 MPU to explore a rich set of peripherals and interfaces to the base board including Serial ports, one Gigabit Ethernet and one 10/100M bps Ethernet, two USB 2.0 HOST and one USB 2.0 OTG, one TF card slot as well as a USB based 4G Mini PCIE interface. It has a DVP camera interface and a MIPI-CSI interface to allow connecting with camera modules. It also supports multi video output interfaces such as dual LVDS, HDMI and CVBS OUT, to achieve different display in dual screens.
MYD-J1028X Development Board Overview
The MYD-J1028X development board consists ofthe high-performance MYC-J1028X CPU Module and a base board to provide a complete evaluation platform for NXP LS1028A Processor which features dual Arm Cortex-A72 cores,with integrated 3D GPU for HMI, and a time-sensitive networking (TSN) -enabled Ethernet switch and Ethernet controllers to support converged IT and OT networks. Typical applications are industrial router, industrial control, edge computing, automotive electronics, industrial IoT and other scenes requiring high reliability, powerful communication and display capabilities.
The MYC-J1028X CPU Module is an ARM SoM with Layerscape LS1028A SoC, 2G DDR4, 8GB eMMC, 32Kbit EEPROM and a temperature sensor. It is connected to the base board of MYD-J1028X through one 0.5mm pitch 314-pin MXM 3.0 gold-finger-edge-card connector. The base board has brought out rich peripherals through connectors and headers such as 5G Module interface, one M.2 Key B based SSD Module interface,one DP display port, one Audio output port, one Micro SD card slot as well as two SIM card slots and more others.
he MYD-J1028X development board is delivered with one Quick Start Guide, one Type-C cable, one 12V/2A power adapter and one DC power jack adapter to provide user a complete platform for evaluating and prototyping based on LS1028A processor. MYIR also offers MY-CAM002U USB Camera Module and MY-WIREDCOM RPI Module (RS232/RS485/CAN) as options for the board.
The MYD-J1028X is capable of supporting Ubuntu and Real-time Edge images based on Linux kernel. Driver source code and compilation tools are provided to enable users to start their development rapidly and easily.
MYC-J1028X CPU Module Overview
Measuring 45mm by 82mm, the MYC-J1028X CPU Module is a high-performance embedded ARM SoM for industrial and automotive applications. It is based on NXP LS1028A SoC of the Layerscape family and features 1.5 GHz dual Arm Cortex-A72 cores, with integrated 3D GPU for HMI, and a time-sensitive networking (TSN) -enabled Ethernet switch and Ethernet controllers to support converged IT and OT networks. The MYC-J1028X has 2GB DDR4 and supports multiple external memory options including 8GB eMMC (default), QSPI NAND Flash (DNP) and XSPI NOR Flash (DNP). It has 32Kbit EEPROM and one temperature sensor on the rear of the board. A number of peripheral and IO signals are access through one 0.5mm pitch 314-pin MXM 3.0 gold-finger-edge-card connector. It is capable of supporting Ubuntu and Real-time Edge images based on Linux kernel.
The MYD-J1028X Development Board is using the MYC-J1028X as core controller board and has explored the features of the LS1028A processor to serve as an solid reference design for customer’s development. The base board has brought out rich peripherals through connectors and headers such as one USB3.0 Host, five Gigabit TSN Ethernet, one M.2 Key E based WiFi module interface, one USB 3.0 M.2 Key B based 5G Module interface, one M.2 Key B based SSD Module interface, one DP display port, one Audio output port, one Micro SD card slot as well as two SIM card slots and more others.
MYD-YA15XC-T Development Board
The MYD-YA15XC-T development board is using the MYC-YA15XC-T CPU Module as core controller board which is populated on a specially designed base board through 1.0 mm pitch 148-pin stamp-hole (Castellated-Hole) expansion interface. The MYD-YA15XC-T is a good reference design for using ST STM32MP1 Processors which features 650MHz Single or Dual Arm Cortex-A7 and 209MHz Cortex-M4 Cores. Typical applications are industrial control, consumer electronics, smart home, medical and more other energy-efficient applications which require rich performance and low power. More information can be found at:
http://www.myirtech.com/list.asp?id=659
MYC-YA15XC-T CPU Module
Measuring only 39mm by 37mm, the MYC-YA15XC-T CPU Module is MYIR’s another System-on Module (SoM) based on ST STM32MP1 series processors after the first release of the MYC-YA157C CPU Module, The new MYC-Y157XC-T module has integrated the STM32MP151AAC3T processor by default and a dedicated Power Management IC STPMIC1 also from STMicroelectronics. It has onboard DDR3L, Nand Flash or eMMC and 32KB EEPROM. A number of peripherals and IO signals are brought out through 1.0 mm pitch 148-pin stamp-hole (Castellated-Hole) expansion interface to make the module an excellent embedded controller for applications like industrial control, consumer electronics, smart home, medical and etc. The MYC-YA15XC-T is running Linux with provided 5.4.31 kernel and many drivers in source code.
MYS-8MMX Single Board Computer
The MYS-8MMX Single Board Computer has a compact design with only 95mm by 65mm form factor. It is powered by NXP’s first embedded multicore applications processor i.MX 8M Mini which features up to 1.8GHz quad-core ARM Cortex-A53 plus 400MHz Cortex-M4 processor. The tiny board takes full features of the processor and is equipped with 2GB DDR4, 8GB eMMC and 32MB QSPI Flash. It has explored rich peripheral interfaces through headers and connectors including two USB 2.0 Host, one USB OTG, one Gigabit Ethernet, TF card, M.2 interface, LVDS LCD interface, MIPI CSI interface, HDMI output, IO expansion interface and more others. The AP6256 WiFi/BT module on the board also allows wireless communications with other devices. It is capable of running Linux operating system based on the Yocto 3.0 or Ubuntu 18.04 .
FZ3 Card - Deep Learning Accelerator Card
The FZ3 Card is a powerful deep learning accelerator card based on Xilinx Zynq UltraScale+ ZU3EG MPSoC which features a 1.2 GHz quad-core ARM Cortex-A53 64-bit application processor, a 600MHz dual-core real-time ARM Cortex-R5 processor, a Mali400 embedded GPU and rich FPGA fabric. Besides, it integrates 4GB DDR4, 8GB eMMC, 32MB QSPI Flash and 32KB EEPROM as well as many peripherals including USB 2.0, USB 3.0, Gigabit Ethernet, TF, DisplayPort (DP), PCIe interface, MIPI-CSI, BT1120 camera, USB-UART, JTAG, IO expansion interfaces, etc. The rich resources enable users to integrate intelligent hardware easily.
The FZ3 Card is able to run PetaLinux 2019.1 and supports PaddlePaddle deep learning AI framework which is fully compatible to use Baidu Brain’s AI development tools like EasyDL, AI Studio and EasyEdge to enable developers and engineers to quickly leverage Baidu-proven technology or deploy self-defined models, enabling faster deployment. Typical applications are AI camera, AI computing device, robotics, intelligent car, intelligent electronic scale, patrol UAV and other embedded intelligent applications.
Z turn Board Tutorial Book
This book is written by Mr.Joseph Attard, a Senior lecturer II working at Malta College for Arts Science and Technology on the island of Malta. In this book, Joseph shared a lot of content on how to work with MYIR's Z-turn board, starting from simply creating a project in Vivado to flash an LED, continuing to Detecting Switch inputs, all the way to interfacing the Xilinx Zynq 7 System on Chip to multiple analogue sensors through multiple XADC channels. All the above-mentioned interfacing is done from both the ARM Cortex A9, commonly known as the Processing System and the Artix 7 FPGA, commonly known as Programmable Logic, both residing within the Zynq 7000 SoC.
Verification of EMC Compliance for MYC-Y6ULX CPU Module
The file has presented the verification of EMC compliance for MYIR's MYC-Y6ULX CPU Module which is an system-on-module (SoM) powered by NXP i.MX 6UltraLite / 6ULL processor based on the ARM Cortex-A7 architecture. The module is ready to run Linux and can support industrial operating temperature range from -40 to +85 Celsius.
Development Board for NXP i.MX 8M Quad Application Processors
The overview file introduces a versatile platform MYD-JX8MX development board for evaluating the MYC-JX8MX CPU Module. It takes full features of the i.MX 8M processor and has brought out rich peripherals through connectors and headers such as 4 x USB 3.0 Host ports and 1 x USB 3.0 Host/Device port, Gigabit Ethernet, TF card slot, USB based Mini PCIe interface for 4G LTE Module, WiFi/BT, Audio In/Out, HDMI, 2 x MIPI-CSI, MIPI-DSI, 2 x LVDS display interfaces, PCIe 3.0 (x4) NVMe SSD Interface, etc. The board is ready to run Linux and can work in extended temperature ranging from -30°C to 80°C. It is delivered with necessary cable accessories for customers to easily start development as soon as getting it out-of-box. A MIPI Camera Module MY-CAM003 is provided as an option for the board.
High-performance ARM SoM Powered by NXP i.MX 8M
The document file has introduced MYIR's high-performance ARM SoM MYC-JX8MX CPU Module, which is built around the NXP i.MX 8M Quad processor featuring 1.3GHz quad ARM Cortex-A53 cores and a real-time ARM Cortex-M4 co-processor. The module runs Linux and is capable of working in extended temperature ranging from -30°C to 80°C.
i.MX 6UL/6ULL Development FAQs
This technical paper has collected and summarized some frequently asked questions (FAQs) by MYIR's engineers on development based on NXP's i.MX 6UL/6ULL ARM Cortex-A7 processors. Hope it can help developers during their work.
MYIR Product Catalog 2019
The catalogue includes helpful information on different ARM based products available from MYIR Tech Limited such as development boards, single board computers, CPU modules and so on.
MYD-Y6ULX Development Board for i.MX 6UL/6ULL ARM Cortex-A7 Processors
The MYD-Y6ULX development board is a complete evaluation platform for NXP’s i.MX 6UltraLite / 6ULL processor family, which can operate at 528 MHz and features the most efficient ARM Cortex-A7 core, providing various memory interfaces and enhancing the flexibility and convenience of the board to connect peripheral devices. The board is ready to run Linux and supports industrial operating temperature range from -40 to +85 Celsius. employs the MYC-Y6ULX CPU Module as the controller board by populating the CPU Module on its base board through 1.0mm pitch 140-pin stamp hole interface. The MYC-Y6ULX CPU Module is mounted with a shield cover and integrated with core components including i.MX 6UltraLite / 6ULL processor, 256MB DDR3, 256MB Nand Flash or optional 4GB eMMC and Ethernet PHY. The base board has extended rich peripherals through connectors and headers like Serial ports, USB, Ethernet, CAN, Micro SD card, WiFi module, LCD/Touch screen, Camera, Audio as well as a Mini PCIe interface for optional USB based 4G LTE module. It is a versatile platform and solid reference design delivered with necessary cable accessories and detailed documentations ideal for prototype and evaluation based on i.MX 6UL/6ULL solutions.
MYC-Y6ULX CPU Module - NXP i.MX 6UL/6ULL System-on-Module
This overview document gives a brief introduction of MYIR's MYC-Y6ULX CPU Module which is powered by NXP i.MX 6UltraLite / 6ULL processor based on the ARM Cortex-A7 architecture. It is ready to run Linux and delivers high performance with ultra-efficient power that targets Industry Control, Communications, HMI, Smart Healthcare and Internet of Things (IoT) applications. It carries out as many as peripheral signals and IOs through 1.0mm pitch 140-pin stamp hole expansion interface to allow customer’s extension for their next embedded design. The module can support industrial operating temperature range from -40 to +85 Celsius.
MYS-6ULX Single Board Computer for Industry 4.0 and IoT Applications
The document introduced MYIR's i.MX 6UL / 6ULL based ARM Cortex-A7 Single Board Computer for Industry 4.0 and IoT applications which is ready to run Linux with high performance and ulta low cost.
MYC-C7Z015 CPU Module
The MYC-C7Z015 CPU Module is an SOM (System on Module) board based on Xilinx XC7Z015 (Z-7015) All Programmable System-on-Chip (SoC) which is among the Xilinx Zynq-7000 family, featuring integrated dual-core ARM Cortex-A9 processor with Xilinx 7-series FPGA logic, four 6.25Gbps SerDes transceivers and one PCIe Gen2 x 4 integrated block. The MYC-C7Z015 module has 1GB DDR3 SDRAM, 4GB eMMC, 32MB quad SPI Flash, a Gigabit Ethernet PHY, a USB PHY and external watchdog on board. It provides a large number of I/O signals for ARM peripherals and FPGA I/Os through two 0.8mm pitch 140-pin board-to-board connectors, which is ideal for your next embedded design.
The MYC-C7Z015 CPU Module is compatible with MYIR’s MYC-C7Z010/20 CPU Modules and they can share the same base board which is designed by MYIR for evaluation or prototype purpose. The MYD-C7Z015 development board takes full features of the Zynq-7015 SoC. It has full features of the MYD-C7Z010/20 development board, additionally, it has one PCIe interface and one SFP transceiver module interface.
The MYC-C7Z015 CPU Module is ready to run Linux 3.15.0. It can be used in a variety of commercial, medical, automation, industrial, and military embedded applications.
Atmel SAMA5D4 Development Board and CPU Module
This document introduces MYIR's MYD-JA5D4X development board and MYC-JA5D4X CPU Module which are based on Atmel’s ARM Cortex-A5 based SAMA5D42 orSAMA5D44 ARM Cortex-A5 processor, capable of running Linux and support extended operation temperature.
MYD-C7Z010/20 Development Board
The MYD-C7Z010/20 development board is built around the MYC-C7Z010/20 CPU Module which is a compact Linux-ready ZYNQ-based SOM (System on Module). The MYC-C7Z010/20 combines the Xilinx XC7Z010 (ZYNQ-7010) or XC7Z020 (ZYNQ-7020) SoC device, 1GB DDR3 SDRAM, 4GB eMMC, 32MB quad SPI Flash, a Gigabit Ethernet PHY, a USB PHY and external watchdog. It is connected to the MYD-C7Z010/20 base board through two 0.8mm pitch 140-pin board-to-board connectors. The MYD-C7Z010/20 development board is delivered with necessary cable accessories and MYIR offers optional 4.3-inch and 7-inch LCD Module. The board is preloaded with Linux. It is a high-performance and low-cost development platform for evaluation and prototype based on Xilinx Zynq-7000 All Programmable SoC family.
Epistemic Interaction - tuning interfaces to provide information for AI support
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
De-mystifying Zero to One: Design Informed Techniques for Greenfield Innovati...
De-mystifying Zero to One: Design Informed Techniques for Greenfield Innovation With Your Product by VP of Product Design, Warner Music Group
Transcript: Selling digital books in 2024: Insights from industry leaders - T...
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
Essentials of Automations: Optimizing FME Workflows with Parameters
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
When stars align: studies in data quality, knowledge graphs, and machine lear...
Keynote at DQMLKG workshop at the 21st European Semantic Web Conference 2024
To Graph or Not to Graph Knowledge Graph Architectures and LLMs
Reflecting on new architectures for knowledge based systems in light of generative ai
Bits & Pixels using AI for Good.........
A whirlwind tour of tech & AI for socio-environmental impact.
More Related Content
More from Linda Zhang
FZ3 Card - Deep Learning Accelerator Card
The FZ3 Card is a powerful deep learning accelerator card based on Xilinx Zynq UltraScale+ ZU3EG MPSoC which features a 1.2 GHz quad-core ARM Cortex-A53 64-bit application processor, a 600MHz dual-core real-time ARM Cortex-R5 processor, a Mali400 embedded GPU and rich FPGA fabric. Besides, it integrates 4GB DDR4, 8GB eMMC, 32MB QSPI Flash and 32KB EEPROM as well as many peripherals including USB 2.0, USB 3.0, Gigabit Ethernet, TF, DisplayPort (DP), PCIe interface, MIPI-CSI, BT1120 camera, USB-UART, JTAG, IO expansion interfaces, etc. The rich resources enable users to integrate intelligent hardware easily.
The FZ3 Card is able to run PetaLinux 2019.1 and supports PaddlePaddle deep learning AI framework which is fully compatible to use Baidu Brain’s AI development tools like EasyDL, AI Studio and EasyEdge to enable developers and engineers to quickly leverage Baidu-proven technology or deploy self-defined models, enabling faster deployment. Typical applications are AI camera, AI computing device, robotics, intelligent car, intelligent electronic scale, patrol UAV and other embedded intelligent applications.
Z turn Board Tutorial Book
This book is written by Mr.Joseph Attard, a Senior lecturer II working at Malta College for Arts Science and Technology on the island of Malta. In this book, Joseph shared a lot of content on how to work with MYIR's Z-turn board, starting from simply creating a project in Vivado to flash an LED, continuing to Detecting Switch inputs, all the way to interfacing the Xilinx Zynq 7 System on Chip to multiple analogue sensors through multiple XADC channels. All the above-mentioned interfacing is done from both the ARM Cortex A9, commonly known as the Processing System and the Artix 7 FPGA, commonly known as Programmable Logic, both residing within the Zynq 7000 SoC.
Verification of EMC Compliance for MYC-Y6ULX CPU Module
The file has presented the verification of EMC compliance for MYIR's MYC-Y6ULX CPU Module which is an system-on-module (SoM) powered by NXP i.MX 6UltraLite / 6ULL processor based on the ARM Cortex-A7 architecture. The module is ready to run Linux and can support industrial operating temperature range from -40 to +85 Celsius.
Development Board for NXP i.MX 8M Quad Application Processors
The overview file introduces a versatile platform MYD-JX8MX development board for evaluating the MYC-JX8MX CPU Module. It takes full features of the i.MX 8M processor and has brought out rich peripherals through connectors and headers such as 4 x USB 3.0 Host ports and 1 x USB 3.0 Host/Device port, Gigabit Ethernet, TF card slot, USB based Mini PCIe interface for 4G LTE Module, WiFi/BT, Audio In/Out, HDMI, 2 x MIPI-CSI, MIPI-DSI, 2 x LVDS display interfaces, PCIe 3.0 (x4) NVMe SSD Interface, etc. The board is ready to run Linux and can work in extended temperature ranging from -30°C to 80°C. It is delivered with necessary cable accessories for customers to easily start development as soon as getting it out-of-box. A MIPI Camera Module MY-CAM003 is provided as an option for the board.
High-performance ARM SoM Powered by NXP i.MX 8M
The document file has introduced MYIR's high-performance ARM SoM MYC-JX8MX CPU Module, which is built around the NXP i.MX 8M Quad processor featuring 1.3GHz quad ARM Cortex-A53 cores and a real-time ARM Cortex-M4 co-processor. The module runs Linux and is capable of working in extended temperature ranging from -30°C to 80°C.
i.MX 6UL/6ULL Development FAQs
This technical paper has collected and summarized some frequently asked questions (FAQs) by MYIR's engineers on development based on NXP's i.MX 6UL/6ULL ARM Cortex-A7 processors. Hope it can help developers during their work.
MYIR Product Catalog 2019
The catalogue includes helpful information on different ARM based products available from MYIR Tech Limited such as development boards, single board computers, CPU modules and so on.
MYD-Y6ULX Development Board for i.MX 6UL/6ULL ARM Cortex-A7 Processors
The MYD-Y6ULX development board is a complete evaluation platform for NXP’s i.MX 6UltraLite / 6ULL processor family, which can operate at 528 MHz and features the most efficient ARM Cortex-A7 core, providing various memory interfaces and enhancing the flexibility and convenience of the board to connect peripheral devices. The board is ready to run Linux and supports industrial operating temperature range from -40 to +85 Celsius. employs the MYC-Y6ULX CPU Module as the controller board by populating the CPU Module on its base board through 1.0mm pitch 140-pin stamp hole interface. The MYC-Y6ULX CPU Module is mounted with a shield cover and integrated with core components including i.MX 6UltraLite / 6ULL processor, 256MB DDR3, 256MB Nand Flash or optional 4GB eMMC and Ethernet PHY. The base board has extended rich peripherals through connectors and headers like Serial ports, USB, Ethernet, CAN, Micro SD card, WiFi module, LCD/Touch screen, Camera, Audio as well as a Mini PCIe interface for optional USB based 4G LTE module. It is a versatile platform and solid reference design delivered with necessary cable accessories and detailed documentations ideal for prototype and evaluation based on i.MX 6UL/6ULL solutions.
MYC-Y6ULX CPU Module - NXP i.MX 6UL/6ULL System-on-Module
This overview document gives a brief introduction of MYIR's MYC-Y6ULX CPU Module which is powered by NXP i.MX 6UltraLite / 6ULL processor based on the ARM Cortex-A7 architecture. It is ready to run Linux and delivers high performance with ultra-efficient power that targets Industry Control, Communications, HMI, Smart Healthcare and Internet of Things (IoT) applications. It carries out as many as peripheral signals and IOs through 1.0mm pitch 140-pin stamp hole expansion interface to allow customer’s extension for their next embedded design. The module can support industrial operating temperature range from -40 to +85 Celsius.
MYS-6ULX Single Board Computer for Industry 4.0 and IoT Applications
The document introduced MYIR's i.MX 6UL / 6ULL based ARM Cortex-A7 Single Board Computer for Industry 4.0 and IoT applications which is ready to run Linux with high performance and ulta low cost.
MYC-C7Z015 CPU Module
The MYC-C7Z015 CPU Module is an SOM (System on Module) board based on Xilinx XC7Z015 (Z-7015) All Programmable System-on-Chip (SoC) which is among the Xilinx Zynq-7000 family, featuring integrated dual-core ARM Cortex-A9 processor with Xilinx 7-series FPGA logic, four 6.25Gbps SerDes transceivers and one PCIe Gen2 x 4 integrated block. The MYC-C7Z015 module has 1GB DDR3 SDRAM, 4GB eMMC, 32MB quad SPI Flash, a Gigabit Ethernet PHY, a USB PHY and external watchdog on board. It provides a large number of I/O signals for ARM peripherals and FPGA I/Os through two 0.8mm pitch 140-pin board-to-board connectors, which is ideal for your next embedded design.
The MYC-C7Z015 CPU Module is compatible with MYIR’s MYC-C7Z010/20 CPU Modules and they can share the same base board which is designed by MYIR for evaluation or prototype purpose. The MYD-C7Z015 development board takes full features of the Zynq-7015 SoC. It has full features of the MYD-C7Z010/20 development board, additionally, it has one PCIe interface and one SFP transceiver module interface.
The MYC-C7Z015 CPU Module is ready to run Linux 3.15.0. It can be used in a variety of commercial, medical, automation, industrial, and military embedded applications.
Atmel SAMA5D4 Development Board and CPU Module
This document introduces MYIR's MYD-JA5D4X development board and MYC-JA5D4X CPU Module which are based on Atmel’s ARM Cortex-A5 based SAMA5D42 orSAMA5D44 ARM Cortex-A5 processor, capable of running Linux and support extended operation temperature.
MYD-C7Z010/20 Development Board
The MYD-C7Z010/20 development board is built around the MYC-C7Z010/20 CPU Module which is a compact Linux-ready ZYNQ-based SOM (System on Module). The MYC-C7Z010/20 combines the Xilinx XC7Z010 (ZYNQ-7010) or XC7Z020 (ZYNQ-7020) SoC device, 1GB DDR3 SDRAM, 4GB eMMC, 32MB quad SPI Flash, a Gigabit Ethernet PHY, a USB PHY and external watchdog. It is connected to the MYD-C7Z010/20 base board through two 0.8mm pitch 140-pin board-to-board connectors. The MYD-C7Z010/20 development board is delivered with necessary cable accessories and MYIR offers optional 4.3-inch and 7-inch LCD Module. The board is preloaded with Linux. It is a high-performance and low-cost development platform for evaluation and prototype based on Xilinx Zynq-7000 All Programmable SoC family.
More from Linda Zhang (13)
Verification of EMC Compliance for MYC-Y6ULX CPU Module
Verification of EMC Compliance for MYC-Y6ULX CPU Module
Development Board for NXP i.MX 8M Quad Application Processors
Development Board for NXP i.MX 8M Quad Application Processors
MYD-Y6ULX Development Board for i.MX 6UL/6ULL ARM Cortex-A7 Processors
MYD-Y6ULX Development Board for i.MX 6UL/6ULL ARM Cortex-A7 Processors
MYC-Y6ULX CPU Module - NXP i.MX 6UL/6ULL System-on-Module
MYC-Y6ULX CPU Module - NXP i.MX 6UL/6ULL System-on-Module
MYS-6ULX Single Board Computer for Industry 4.0 and IoT Applications
MYS-6ULX Single Board Computer for Industry 4.0 and IoT Applications
Recently uploaded
Epistemic Interaction - tuning interfaces to provide information for AI support
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
De-mystifying Zero to One: Design Informed Techniques for Greenfield Innovati...
De-mystifying Zero to One: Design Informed Techniques for Greenfield Innovation With Your Product by VP of Product Design, Warner Music Group
Transcript: Selling digital books in 2024: Insights from industry leaders - T...
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
Essentials of Automations: Optimizing FME Workflows with Parameters
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
When stars align: studies in data quality, knowledge graphs, and machine lear...
Keynote at DQMLKG workshop at the 21st European Semantic Web Conference 2024
To Graph or Not to Graph Knowledge Graph Architectures and LLMs
Reflecting on new architectures for knowledge based systems in light of generative ai
Bits & Pixels using AI for Good.........
A whirlwind tour of tech & AI for socio-environmental impact.
Designing Great Products: The Power of Design and Leadership by Chief Designe...
Designing Great Products: The Power of Design and Leadership by Chief Designer, Beats by Dr Dre
GraphRAG is All You need? LLM & Knowledge Graph
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Neuro-symbolic is not enough, we need neuro-*semantic*
Neuro-symbolic (NeSy) AI is on the rise. However, simply machine learning on just any symbolic structure is not sufficient to really harvest the gains of NeSy. These will only be gained when the symbolic structures have an actual semantics. I give an operational definition of semantics as “predictable inference”.
All of this illustrated with link prediction over knowledge graphs, but the argument is general.
Assuring Contact Center Experiences for Your Customers With ThousandEyes
Presented by Suzanne Phillips and Alex Marcotte
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
From Siloed Products to Connected Ecosystem: Building a Sustainable and Scala...
From Siloed Products to Connected Ecosystem: Building a Sustainable and Scalable Platform by VP of Product, The New York Times
Mission to Decommission: Importance of Decommissioning Products to Increase E...
Mission to Decommission: Importance of Decommissioning Products to Increase Enterprise-Wide Efficiency by VP Data Platform, American Express
UiPath Test Automation using UiPath Test Suite series, part 4
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Recently uploaded (20)
Epistemic Interaction - tuning interfaces to provide information for AI support
Epistemic Interaction - tuning interfaces to provide information for AI support
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...
De-mystifying Zero to One: Design Informed Techniques for Greenfield Innovati...
De-mystifying Zero to One: Design Informed Techniques for Greenfield Innovati...
Transcript: Selling digital books in 2024: Insights from industry leaders - T...
Transcript: Selling digital books in 2024: Insights from industry leaders - T...
Essentials of Automations: Optimizing FME Workflows with Parameters
Essentials of Automations: Optimizing FME Workflows with Parameters
When stars align: studies in data quality, knowledge graphs, and machine lear...
When stars align: studies in data quality, knowledge graphs, and machine lear...
To Graph or Not to Graph Knowledge Graph Architectures and LLMs
To Graph or Not to Graph Knowledge Graph Architectures and LLMs
Designing Great Products: The Power of Design and Leadership by Chief Designe...
Designing Great Products: The Power of Design and Leadership by Chief Designe...
FIDO Alliance Osaka Seminar: FIDO Security Aspects.pdf
FIDO Alliance Osaka Seminar: FIDO Security Aspects.pdf
Neuro-symbolic is not enough, we need neuro-*semantic*
Neuro-symbolic is not enough, we need neuro-*semantic*
FIDO Alliance Osaka Seminar: Passkeys at Amazon.pdf
FIDO Alliance Osaka Seminar: Passkeys at Amazon.pdf
Assuring Contact Center Experiences for Your Customers With ThousandEyes
Assuring Contact Center Experiences for Your Customers With ThousandEyes
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...
From Siloed Products to Connected Ecosystem: Building a Sustainable and Scala...
From Siloed Products to Connected Ecosystem: Building a Sustainable and Scala...
Mission to Decommission: Importance of Decommissioning Products to Increase E...
Mission to Decommission: Importance of Decommissioning Products to Increase E...
UiPath Test Automation using UiPath Test Suite series, part 4
UiPath Test Automation using UiPath Test Suite series, part 4