Atc am10176109622836 revit para arquitetura - professional
•
0 likes•11 views
Lucas Abraão Freitas de Oliveira has completed an 80-hour Revit Architecture 2020 course taught by Luis Felipe de Oliveira Machado at the Autodesk Authorized Training Center Axiom - Treinamentos e Inovação. The certificate confirms Lucas successfully finished the professional-level training course on Revit Architecture designed to satisfy his requirements using relevant content and comprehensive course materials.
Report
Share
Report
Share
Download to read offline
Recommended
Atc am10176109618059 revit para arquitetura - advanced
Lucas Abraão Freitas de Oliveira has completed an advanced Autodesk Revit 2018 for Architecture course of 40 hours in duration from July 2nd to July 3rd, 2020. The course was taught by instructor Erick Mark Jucá Neves at the Autodesk Authorized Training Center Axiom - Treinamentos e Inovação, which is authorized to deliver quality training experiences using relevant Autodesk content and comprehensive course materials.
Atc am10176109614685 revit para arquitetura - start
Lucas Abraão Freitas de Oliveira has successfully completed a 60-hour Revit 2017 Revit para Arquitetura - Start course taught by Erick Mark Jucá Neves at the Autodesk Authorized Training Center Axiom - Treinamentos e Inovação. The certificate recognizes Lucas' completion of quality training using relevant course content and materials to help individuals imagine, design, and create using Autodesk products.
Atc am351509612093 Revit architecture BIM expert modeler
Carlos Lapa has completed an Autodesk authorized training course on Revit 2019 architectural modeling BIM. The course was held from April 16-24, 2020 and was taught by Juan Diego Pareja at Acaddemia Autodesk Authorized Training Center. The certificate confirms Carlos successfully finished 17-24 hours of training related to Autodesk products and software.
Atc am369009602902 revit mep by miller - nivel 1
Ana Lica Sánchez Echegaray has completed a Revit MEP 2020 training course offered by Miller & Co, an Autodesk Authorized Training Center. The 31-December-2020 course, taught by instructor Hector Miller, was 41-100 hours and satisfied her training requirements for the Autodesk product. Autodesk's vision is to help people imagine, design, and create a better world through authorized training centers.
Atc am369009602904 revit mep by miller - nivel 2
Ana Lica Sánchez Echegaray has completed an Autodesk Authorized Training Center course in Revit MEP 2020. The course, taught by instructor Hector Miller from December 31, 2020 to January 10, 2021, was designed to provide quality training on Autodesk products using relevant materials. Autodesk's goal is to enable people to imagine, design, and create improvements to the world.
Atc am213009602908 revit architecture avanzado
Gabriela Mejia Mejia successfully completed an advanced Revit Architecture course from January 25-2020 taught by Francis Tigreros. The 17-24 hour course was delivered by Dibujo Arquitectonico Por Computadora SA DE CV, an Autodesk Authorized Training Center. Autodesk's vision is to help people imagine, design, and create a better world through quality training on their products.
Atc am369009624947 procesos bim - iso 19650 compliance
Ana Lica Sánchez Echegaray has completed an Autodesk authorized training course on Revit 2021 BIM processes that complies with ISO 19650 standards. The 31-December-2020 course, taught by instructor Hector Miller over 60 hours, was delivered by the Autodesk Authorized Training Center Miller & Co and provides a certificate of completion.
Atc am369009602906 revit mep by miller - nivel 3
Ana Lica Sánchez Echegaray has completed a Revit MEP 2020 course taught by Hector Miller at the Autodesk Authorized Training Center Miller & Co. The 31-December-2020 course lasted 41-100 hours and certifies her successful completion of training on Autodesk products designed to satisfy her requirements. Autodesk's vision is to help people imagine, design, and create a better world through quality authorized training center courses and comprehensive courseware.
Recommended
Atc am10176109618059 revit para arquitetura - advanced
Lucas Abraão Freitas de Oliveira has completed an advanced Autodesk Revit 2018 for Architecture course of 40 hours in duration from July 2nd to July 3rd, 2020. The course was taught by instructor Erick Mark Jucá Neves at the Autodesk Authorized Training Center Axiom - Treinamentos e Inovação, which is authorized to deliver quality training experiences using relevant Autodesk content and comprehensive course materials.
Atc am10176109614685 revit para arquitetura - start
Lucas Abraão Freitas de Oliveira has successfully completed a 60-hour Revit 2017 Revit para Arquitetura - Start course taught by Erick Mark Jucá Neves at the Autodesk Authorized Training Center Axiom - Treinamentos e Inovação. The certificate recognizes Lucas' completion of quality training using relevant course content and materials to help individuals imagine, design, and create using Autodesk products.
Atc am351509612093 Revit architecture BIM expert modeler
Carlos Lapa has completed an Autodesk authorized training course on Revit 2019 architectural modeling BIM. The course was held from April 16-24, 2020 and was taught by Juan Diego Pareja at Acaddemia Autodesk Authorized Training Center. The certificate confirms Carlos successfully finished 17-24 hours of training related to Autodesk products and software.
Atc am369009602902 revit mep by miller - nivel 1
Ana Lica Sánchez Echegaray has completed a Revit MEP 2020 training course offered by Miller & Co, an Autodesk Authorized Training Center. The 31-December-2020 course, taught by instructor Hector Miller, was 41-100 hours and satisfied her training requirements for the Autodesk product. Autodesk's vision is to help people imagine, design, and create a better world through authorized training centers.
Atc am369009602904 revit mep by miller - nivel 2
Ana Lica Sánchez Echegaray has completed an Autodesk Authorized Training Center course in Revit MEP 2020. The course, taught by instructor Hector Miller from December 31, 2020 to January 10, 2021, was designed to provide quality training on Autodesk products using relevant materials. Autodesk's goal is to enable people to imagine, design, and create improvements to the world.
Atc am213009602908 revit architecture avanzado
Gabriela Mejia Mejia successfully completed an advanced Revit Architecture course from January 25-2020 taught by Francis Tigreros. The 17-24 hour course was delivered by Dibujo Arquitectonico Por Computadora SA DE CV, an Autodesk Authorized Training Center. Autodesk's vision is to help people imagine, design, and create a better world through quality training on their products.
Atc am369009624947 procesos bim - iso 19650 compliance
Ana Lica Sánchez Echegaray has completed an Autodesk authorized training course on Revit 2021 BIM processes that complies with ISO 19650 standards. The 31-December-2020 course, taught by instructor Hector Miller over 60 hours, was delivered by the Autodesk Authorized Training Center Miller & Co and provides a certificate of completion.
Atc am369009602906 revit mep by miller - nivel 3
Ana Lica Sánchez Echegaray has completed a Revit MEP 2020 course taught by Hector Miller at the Autodesk Authorized Training Center Miller & Co. The 31-December-2020 course lasted 41-100 hours and certifies her successful completion of training on Autodesk products designed to satisfy her requirements. Autodesk's vision is to help people imagine, design, and create a better world through quality authorized training center courses and comprehensive courseware.
AM1020140973441
WHORKSHOP BIM Y SIMULACION ENERGETICA, dictado por Danny Lobos de Bauhaus Digital Architecture . Chile
Atc am213009599585 revit architecture intermedio
Gabriela Mejia Mejia has completed an Autodesk Authorized Training Center course in Revit 2020 Revit Architecture Intermedio. The course was taught from January 4th to January 17-24th, 2020 by instructor José Antonio Pérez Chávez, and was hosted by the Autodesk Authorized Training Center Dibujo Arquitectonico por Computadora SA de CV. Autodesk's vision is to help people imagine, design, and create a better world through quality education and training on their products.
CIVIL 3D
This certificate confirms that Carolayn Estefanny Huamani Narvaez has successfully completed a 25-32 hour Autodesk Authorized Training Center course in AutoCAD Civil 3D 2015. The course was taught by José Luis Ponce Fuentes on April 11, 2018. Autodesk Authorized Training Centers provide quality training experiences using relevant course content and materials to help students learn Autodesk products and imagine, design, and create a better world.
certificate_1OQDBSOQ43
This certificate of completion recognizes that Ayman Kamal Ghanem Elsaid successfully completed a 60-hour Autodesk 3ds Max 2015 For Architect course taught by Attiah Abdu Abu El-Yazeed Ali at the CGWAY ACADEMY Autodesk Authorized Training Center on December 31, 2014. The Autodesk Authorized Training Center network helps professionals excel in using Autodesk software through relevant training from authorized instructors.
certificate_1NQZAE1NQ4
Carl Bass, President and CEO of Autodesk, congratulates Carl Bass on completing the AutoCAD 3D 2015 Drawing and Modeling course at the Autodesk Authorized Training Center. The certificate recognizes Bass' completion of the 40-hour course, taught by instructor Trajche Stojanov, which was designed to help professionals excel in using Autodesk software through relevant training from authorized instructors and courseware.
certificate_1977623207 (1)
Carl Bass, President and CEO of Autodesk, has issued a Certificate of Completion to Shyrven Joshua P. Galo for the successful completion of the 70-hour Autocad 2016 with Color Rendering course at the Microcadd SM Bacoor Cavite Autodesk Authorized Training Center. The course was taught by instructor Fruto Imperial Olivera III and took place from January 30, 2016. The Autodesk Authorized Training Center network helps professionals excel in using Autodesk software products.
Inventor 2018 - Beginning Certificate
An individual named Norbert Acedański completed an Autodesk Authorized Academic Partner course on Inventor 2018 - Beginning Inventor 2018, which was taught by instructor Mateusz Kus over 17-24 hours and concluded on 10/11/2018. The certificate confirms Norbert successfully finished the training course provided by an Autodesk Authorized Academic Partner to help students learn skills that can be applied to imagine, design and create innovative solutions.
AutoCAD -3d certifikat
Carl Bass, President and CEO of Autodesk, congratulates Aleksandar Ivanovski on completing the 40-hour AutoCAD 2015 3D Drawing and Modeling course taught by Trajche Stojanov at the Semos Computers Educational Center Autodesk Authorized Training Center on April 15, 2016. The certificate verifies Ivanovski achieved excellence in AutoCAD skills through an authorized course designed by Autodesk to meet learning needs with qualified instructors and materials.
05. certificaat navisworks 190207
Berry Van Den Broek has completed a 1-8 hour Naviworls Manage 2019 and Naviworls OP Maat course taught by Rick Heuckeroth at the Autodesk Authorized Training Center ITANNEX. The certificate confirms Berry successfully finished the training course designed around Autodesk products to satisfy training requirements through quality learning experiences and comprehensive courseware delivered by authorized instructors.
AUTODESK CERTIFICATE OF REVIT
Fadhl Abdullah Yahya Rageh has completed a 40-hour Autodesk Revit Architecture 2014 course taught by Sivate Hussain at the Omnix International Authorized Training Center. The certificate recognizes his achievement in mastering the skills and tools needed to use Autodesk Revit Architecture through a professionally instructed course designed by Autodesk.
certificate_12089DDOF4 (2)
This certificate recognizes the completion of an Autodesk training course. Toqa Nasr successfully finished the AutoCAD 2016 3D Drawing & Modeling course, which was 24 hours long and taught by Mohamed Ibrahim Othman Yossif at YAT Learning Centre - Giza. The course helped students learn AutoCAD skills through professional instruction and authorized materials.
certificate_1883272982
Carl Bass, President and CEO of Autodesk, congratulates Cynthia Moey on completing the 24-hour AutoCAD 2016 Essentials Training (Level 1) course at the Autodesk Authorized Training Center. The certificate, numbered 1883272982, certifies that Cynthia Moey achieved excellence in AutoCAD skills from professional instructors using authorized courseware.
certificate_1CSXHEZCS4
Carl Bass, President of Autodesk, congratulates Ahmed Mahdi on completing the 40-hour AutoCAD 3D Essentials course taught by Michael Biell at Renton Technical College's Autodesk Authorized Training Center on June 19, 2015. The certificate verifies Ahmed received professional training using authorized Autodesk courseware to develop his skills in using the AutoCAD software product.
Autodesk Revit MEP- 15 Hours
Mina Anwar Eskander Mikhaeel has completed a 15-hour Autodesk Revit MEP 2013 course taught by instructor Mahmoud Samir Mahmoud at the Russian Culture Center Authorized Training Center on January 12, 2013. The certificate confirms Mina successfully completed the professional training course designed by Autodesk to help users achieve excellence in their software products.
certificate_14LXJLXJLO0
This certificate recognizes the completion of an Autodesk training course in 3ds Max 2010: Design Visualization by Amany El_Shafhie Mohamed. The course, which lasted between 41-100 hours, was held at the YAT Education Centre - Giza and instructed by Abdullah Ahmed El-Garf. Autodesk Authorized Training Centers are designed to provide professionals with relevant and effective training using official Autodesk courseware and software.
Autodesk Revit Structure - 15 Hours
Mina Anwar Eskander Mikhaeel has completed a 15-hour Autodesk Revit Structure 2013 course taught by instructor Mahmoud Samir Mahmoud at the Russian Culture Center Authorized Training Center on December 26, 2012. The course, designed by Autodesk to meet learning needs, helps professionals excel in using Autodesk software products.
certificate_1ARQQPPA41
Carl Bass, President and CEO of Autodesk, congratulates Sara Saad Mahmoud Mrei Younes on completing the 60-hour Mastering AutoCAD 2014 For Engineers course at the YAT Education Centre - Cairo Autodesk Authorized Training Center. The certificate recognizes Sara's achievement in mastering the use of AutoCAD software through professional instruction and authorized course materials.
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
(𝐓𝐋𝐄 𝟏𝟎𝟎) (𝐋𝐞𝐬𝐬𝐨𝐧 𝟏)-𝐏𝐫𝐞𝐥𝐢𝐦𝐬
𝐃𝐢𝐬𝐜𝐮𝐬𝐬 𝐭𝐡𝐞 𝐄𝐏𝐏 𝐂𝐮𝐫𝐫𝐢𝐜𝐮𝐥𝐮𝐦 𝐢𝐧 𝐭𝐡𝐞 𝐏𝐡𝐢𝐥𝐢𝐩𝐩𝐢𝐧𝐞𝐬:
- Understand the goals and objectives of the Edukasyong Pantahanan at Pangkabuhayan (EPP) curriculum, recognizing its importance in fostering practical life skills and values among students. Students will also be able to identify the key components and subjects covered, such as agriculture, home economics, industrial arts, and information and communication technology.
𝐄𝐱𝐩𝐥𝐚𝐢𝐧 𝐭𝐡𝐞 𝐍𝐚𝐭𝐮𝐫𝐞 𝐚𝐧𝐝 𝐒𝐜𝐨𝐩𝐞 𝐨𝐟 𝐚𝐧 𝐄𝐧𝐭𝐫𝐞𝐩𝐫𝐞𝐧𝐞𝐮𝐫:
-Define entrepreneurship, distinguishing it from general business activities by emphasizing its focus on innovation, risk-taking, and value creation. Students will describe the characteristics and traits of successful entrepreneurs, including their roles and responsibilities, and discuss the broader economic and social impacts of entrepreneurial activities on both local and global scales.
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Physical pharmaceutics notes for B.pharm students
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...Nguyen Thanh Tu Collection
https://app.box.com/s/y977uz6bpd3af4qsebv7r9b7s21935vdMore Related Content
What's hot
AM1020140973441
WHORKSHOP BIM Y SIMULACION ENERGETICA, dictado por Danny Lobos de Bauhaus Digital Architecture . Chile
Atc am213009599585 revit architecture intermedio
Gabriela Mejia Mejia has completed an Autodesk Authorized Training Center course in Revit 2020 Revit Architecture Intermedio. The course was taught from January 4th to January 17-24th, 2020 by instructor José Antonio Pérez Chávez, and was hosted by the Autodesk Authorized Training Center Dibujo Arquitectonico por Computadora SA de CV. Autodesk's vision is to help people imagine, design, and create a better world through quality education and training on their products.
CIVIL 3D
This certificate confirms that Carolayn Estefanny Huamani Narvaez has successfully completed a 25-32 hour Autodesk Authorized Training Center course in AutoCAD Civil 3D 2015. The course was taught by José Luis Ponce Fuentes on April 11, 2018. Autodesk Authorized Training Centers provide quality training experiences using relevant course content and materials to help students learn Autodesk products and imagine, design, and create a better world.
certificate_1OQDBSOQ43
This certificate of completion recognizes that Ayman Kamal Ghanem Elsaid successfully completed a 60-hour Autodesk 3ds Max 2015 For Architect course taught by Attiah Abdu Abu El-Yazeed Ali at the CGWAY ACADEMY Autodesk Authorized Training Center on December 31, 2014. The Autodesk Authorized Training Center network helps professionals excel in using Autodesk software through relevant training from authorized instructors.
certificate_1NQZAE1NQ4
Carl Bass, President and CEO of Autodesk, congratulates Carl Bass on completing the AutoCAD 3D 2015 Drawing and Modeling course at the Autodesk Authorized Training Center. The certificate recognizes Bass' completion of the 40-hour course, taught by instructor Trajche Stojanov, which was designed to help professionals excel in using Autodesk software through relevant training from authorized instructors and courseware.
certificate_1977623207 (1)
Carl Bass, President and CEO of Autodesk, has issued a Certificate of Completion to Shyrven Joshua P. Galo for the successful completion of the 70-hour Autocad 2016 with Color Rendering course at the Microcadd SM Bacoor Cavite Autodesk Authorized Training Center. The course was taught by instructor Fruto Imperial Olivera III and took place from January 30, 2016. The Autodesk Authorized Training Center network helps professionals excel in using Autodesk software products.
Inventor 2018 - Beginning Certificate
An individual named Norbert Acedański completed an Autodesk Authorized Academic Partner course on Inventor 2018 - Beginning Inventor 2018, which was taught by instructor Mateusz Kus over 17-24 hours and concluded on 10/11/2018. The certificate confirms Norbert successfully finished the training course provided by an Autodesk Authorized Academic Partner to help students learn skills that can be applied to imagine, design and create innovative solutions.
AutoCAD -3d certifikat
Carl Bass, President and CEO of Autodesk, congratulates Aleksandar Ivanovski on completing the 40-hour AutoCAD 2015 3D Drawing and Modeling course taught by Trajche Stojanov at the Semos Computers Educational Center Autodesk Authorized Training Center on April 15, 2016. The certificate verifies Ivanovski achieved excellence in AutoCAD skills through an authorized course designed by Autodesk to meet learning needs with qualified instructors and materials.
05. certificaat navisworks 190207
Berry Van Den Broek has completed a 1-8 hour Naviworls Manage 2019 and Naviworls OP Maat course taught by Rick Heuckeroth at the Autodesk Authorized Training Center ITANNEX. The certificate confirms Berry successfully finished the training course designed around Autodesk products to satisfy training requirements through quality learning experiences and comprehensive courseware delivered by authorized instructors.
AUTODESK CERTIFICATE OF REVIT
Fadhl Abdullah Yahya Rageh has completed a 40-hour Autodesk Revit Architecture 2014 course taught by Sivate Hussain at the Omnix International Authorized Training Center. The certificate recognizes his achievement in mastering the skills and tools needed to use Autodesk Revit Architecture through a professionally instructed course designed by Autodesk.
certificate_12089DDOF4 (2)
This certificate recognizes the completion of an Autodesk training course. Toqa Nasr successfully finished the AutoCAD 2016 3D Drawing & Modeling course, which was 24 hours long and taught by Mohamed Ibrahim Othman Yossif at YAT Learning Centre - Giza. The course helped students learn AutoCAD skills through professional instruction and authorized materials.
certificate_1883272982
Carl Bass, President and CEO of Autodesk, congratulates Cynthia Moey on completing the 24-hour AutoCAD 2016 Essentials Training (Level 1) course at the Autodesk Authorized Training Center. The certificate, numbered 1883272982, certifies that Cynthia Moey achieved excellence in AutoCAD skills from professional instructors using authorized courseware.
certificate_1CSXHEZCS4
Carl Bass, President of Autodesk, congratulates Ahmed Mahdi on completing the 40-hour AutoCAD 3D Essentials course taught by Michael Biell at Renton Technical College's Autodesk Authorized Training Center on June 19, 2015. The certificate verifies Ahmed received professional training using authorized Autodesk courseware to develop his skills in using the AutoCAD software product.
Autodesk Revit MEP- 15 Hours
Mina Anwar Eskander Mikhaeel has completed a 15-hour Autodesk Revit MEP 2013 course taught by instructor Mahmoud Samir Mahmoud at the Russian Culture Center Authorized Training Center on January 12, 2013. The certificate confirms Mina successfully completed the professional training course designed by Autodesk to help users achieve excellence in their software products.
certificate_14LXJLXJLO0
This certificate recognizes the completion of an Autodesk training course in 3ds Max 2010: Design Visualization by Amany El_Shafhie Mohamed. The course, which lasted between 41-100 hours, was held at the YAT Education Centre - Giza and instructed by Abdullah Ahmed El-Garf. Autodesk Authorized Training Centers are designed to provide professionals with relevant and effective training using official Autodesk courseware and software.
Autodesk Revit Structure - 15 Hours
Mina Anwar Eskander Mikhaeel has completed a 15-hour Autodesk Revit Structure 2013 course taught by instructor Mahmoud Samir Mahmoud at the Russian Culture Center Authorized Training Center on December 26, 2012. The course, designed by Autodesk to meet learning needs, helps professionals excel in using Autodesk software products.
certificate_1ARQQPPA41
Carl Bass, President and CEO of Autodesk, congratulates Sara Saad Mahmoud Mrei Younes on completing the 60-hour Mastering AutoCAD 2014 For Engineers course at the YAT Education Centre - Cairo Autodesk Authorized Training Center. The certificate recognizes Sara's achievement in mastering the use of AutoCAD software through professional instruction and authorized course materials.
What's hot (17)
Recently uploaded
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
(𝐓𝐋𝐄 𝟏𝟎𝟎) (𝐋𝐞𝐬𝐬𝐨𝐧 𝟏)-𝐏𝐫𝐞𝐥𝐢𝐦𝐬
𝐃𝐢𝐬𝐜𝐮𝐬𝐬 𝐭𝐡𝐞 𝐄𝐏𝐏 𝐂𝐮𝐫𝐫𝐢𝐜𝐮𝐥𝐮𝐦 𝐢𝐧 𝐭𝐡𝐞 𝐏𝐡𝐢𝐥𝐢𝐩𝐩𝐢𝐧𝐞𝐬:
- Understand the goals and objectives of the Edukasyong Pantahanan at Pangkabuhayan (EPP) curriculum, recognizing its importance in fostering practical life skills and values among students. Students will also be able to identify the key components and subjects covered, such as agriculture, home economics, industrial arts, and information and communication technology.
𝐄𝐱𝐩𝐥𝐚𝐢𝐧 𝐭𝐡𝐞 𝐍𝐚𝐭𝐮𝐫𝐞 𝐚𝐧𝐝 𝐒𝐜𝐨𝐩𝐞 𝐨𝐟 𝐚𝐧 𝐄𝐧𝐭𝐫𝐞𝐩𝐫𝐞𝐧𝐞𝐮𝐫:
-Define entrepreneurship, distinguishing it from general business activities by emphasizing its focus on innovation, risk-taking, and value creation. Students will describe the characteristics and traits of successful entrepreneurs, including their roles and responsibilities, and discuss the broader economic and social impacts of entrepreneurial activities on both local and global scales.
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Physical pharmaceutics notes for B.pharm students
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...Nguyen Thanh Tu Collection
https://app.box.com/s/y977uz6bpd3af4qsebv7r9b7s21935vdA Visual Guide to 1 Samuel | A Tale of Two Hearts
These slides walk through the story of 1 Samuel. Samuel is the last judge of Israel. The people reject God and want a king. Saul is anointed as the first king, but he is not a good king. David, the shepherd boy is anointed and Saul is envious of him. David shows honor while Saul continues to self destruct.
Leveraging Generative AI to Drive Nonprofit Innovation
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...Nguyen Thanh Tu Collection
https://app.box.com/s/qhtvq32h4ybf9t49ku85x0n3xl4jhr15BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
Recently uploaded (20)
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering.pptx
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
SWOT analysis in the project Keeping the Memory @live.pptx
SWOT analysis in the project Keeping the Memory @live.pptx
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
B. Ed Syllabus for babasaheb ambedkar education university.pdf
B. Ed Syllabus for babasaheb ambedkar education university.pdf
Leveraging Generative AI to Drive Nonprofit Innovation
Leveraging Generative AI to Drive Nonprofit Innovation
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
BÀI TẬP DẠY THÊM TIẾNG ANH LỚP 7 CẢ NĂM FRIENDS PLUS SÁCH CHÂN TRỜI SÁNG TẠO ...
Atc am10176109622836 revit para arquitetura - professional
- 1. CONGRATULATIONS! LUCAS ABRAÃO FREITAS DE OLIVEIRA You have successfully completed an Autodesk® Authorized Training Center® course specifically designed to satisfy your training requirements. Authorized Training Center instructors deliver quality–learning experiences with courses related to Autodesk products utilizing relevant content and comprehensive courseware. Autodesk’s vision is to help people imagine, design, and create a better world. NAME REVIT ARCHITECTURE 2020REVIT PARA ARQUITETURA - PROFESSIONAL PRODUCTCOURSE TITLE 24-AUGUST-2020LUIS FELIPE DE OLIVEIRA MACHADO 80 HOURS COURSE DATE COURSE DURATIONINSTRUCTOR AXIOM - TREINAMENTOS E INOVAÇÃO AUTODESK AUTHORIZED TRAINING CENTER Certificate No. AM101761096228364695529 2020