1. REBATES
Rebates functionality in SAP uses the concept of condition technique as is used in Pricing (but
with rebate specific features), which is explained below:
Letâs see how rebates work in SAP first.
⢠Glen wants to give customer a 3% discount on everything he or she buys (condition type
ZB03).
⢠In addition, Glen provides another 1% discount if the customer reaches a certain amount
of gross sales for the year which (turnover discount), for a specific group of products
(ZB01).
After all these rebates are set up, the rebate conditions will apply on applicable invoices as
accruals instead of off-invoice discounts. The rebate agreement tracks the applied amounts,
which can be reviewed at anytime in the rebate agreement. Once pay out of any rebate amount
to the customer is decided, there will be a rebate settlement represented by a credit memo
request. This reverses accrued amounts and pays the actual amount to the customer either in
form of a check or a credit memo.
Rebate process in SAP is separated into three components:
1) Configuring Rebates
2) Setting up the Rebate Agreements
3) Managing Rebate Agreements and Payments
1) Configuring Rebates
Prerequisites
1. The Payer partner needs to have the âRebateâ field checked in the Customer master on the
Sales Area>Billing Document tab.
2. The billing type must be marked as relevant for rebates (IMG Sales and
Distribution>Billing>Rebate processing>Activate Rebate Processing>Select billing
documents for rebate processing).
3. The sales organization must be marked as relevant for rebates (IMG Sales and
Distribution>Billing>Rebate processing>Activate Rebate Processing>Activate rebate
processing for sales organizations).
The system will issue respective messages when you are trying to process any rebate-related
transactions with any of these settings missing.
2. Condition Technique for Rebates
To create rebate-related access sequences
IMG path Sales and Distributionď Billingď Rebate processingď Condition technique for rebate
processing>Maintain access sequences.
Access Sequence for Rebates
4. Rebate-related condition types are identified by condition class âCâ (Expense Reimbursement).
When you create a new rebate condition type (IMG path Sales and Distribution>Billing>Rebate
processing>Condition technique for rebate processing>Define condition types) and you change
the class to âC
If the âRebate proc.â field is blank, accruals will be posted on each applicable invoice. Entering an
âAâ will prevent the automatic generation of accruals on invoices. The latter would make sense if
you donât base your rebate payment on actual sales, but on the specific performance of the
customer (such as a display in a store or an advertisement in the paper). These rebates would be
paid out as a lump sum and would require the creation of a manual accrual. For example, you
want to give the customer a $5000 rebate if he displays your product at the entrance of his store.
You then would create a one-time manual accrual of $5000. Once you have proof of compliance
by the customer, you can create a lump sum payment in that amount, which would reverse the
accrual and pay the amount to the customer.
With the âProvision con.â Field, you determine if you want to reverse your accruals at time of
partial payment (we will cover payments later in that paper). Leaving this field blank will reverse
the accrual; a value of âAâ will not reverse it.
Rebate Condition Type Definition
5. Now that we defined our rebate conditions, we can add them to our regular pricing procedure
(IMG path Sales and Distribution>Billing-Rebate processing>Condition technique for rebate
processing>Maintain Pricing Procedures. Alternate condition type âAltCTyâ and Alternate
condition base value âAltCBVâ will not let you do any manipulations on how the rebate is
calculated. Also, you will not be able to do any manual changes to rebate conditions. The
requirement â24â in column âReqtâ prevents the rebate condition from displaying on any document
type but the invoice. Simply take this requirement off if you want to have visibility of rebates at
order entry time as well.
A very important setting for the rebate conditions in the pricing procedure is the account keys. At
Invoice creation, accruals are being created that post to accounting, to give you visibility on how
much you owe your customers. The posting of this accrual is done by accounts assigned to the
account key in column âAccrlsâ (Accruals); usually a sales deduction and an accrual account. The
settlement document (in form of a credit memo) uses the accounts assigned to the account key in
column âActKyâ (Account key), which reverse the accrued amounts and credits the customer.
It is also imperative that any sub-total line a rebate condition refers to needs to be stored in one of
the seven available sub-total fields (KZWI1-KZWI6 and BONBA in column âSubToâ). If you are
using multiple pricing procedures, you want to keep the sub-total designations common (i.e., 1 for
gross price, 2 for net price).
Rebate Conditions in a Pricing Procedure
Configuring the Rebate Agreement
To maintain rebate agreement types, use IMG path Sales and Distribution>Billing>Rebate
processing>Rebate agreements>Define Agreement types. Select âNew Entriesâ to create a new
agreement type.
Default values
The first section (Default values) serves to define the defaults that apply for every rebate
agreement of that type. You can define the default start and end date of the agreement. The
default start date is important in regards to whether or not you want to allow retroactive rebates.
For example, if you set the start date of a rebate agreement to todayâs date, all invoices from that
6. moment on are eligible for the rebate and will apply on the invoice itself. However, if your default
is the beginning of the current year, the system will calculate rebates for all invoices in the past,
from that date on, even if they did not apply on the invoice. These rebates are called retroactive.
The other default in this section allows you to set a payment method, which is freely definable to
suit your individual situation. Every rebate settlement will create a credit memo request in SAP;
however, if you set your default to âCâ for check, it will carry this flag forward to FI, to later let you
cut a check. Of course, all of these defaults can be overwritten during creation of the actual
rebate agreement.
Control data
The âCondition type groupâ is linked to the rebate agreement type in a different configuration
transaction, which we will get into a little bit later. This condition type group defines which rebate
condition types are allowed for the rebate agreement type.
The âVerification levelsâ field is also a default that defines the level of detail you see when you
review the applied invoices within a rebate agreement. You can change this default while
reviewing the verification level in the rebate agreement.
The âDifferent val. periodâ option lets you define whether or not the rebate condition records you
create out of the rebate agreement can have validity dates outside of the ones of the agreement. I
suggest you leave this field unchecked.
If you want to allow manual accruals (we will get into what these are for), you need to indicate this
and define the respective order type. âB4â is the standard SAP order type for manual rebate
accruals.
You are able to create the same rebate agreement automatically in regular intervals with the
same data (but different validity dates). To turn on this feature, utilize the âArrangement calendarâ
field to do that. You can add a standard SAP calendar, or your own defined one, to schedule the
automatic creation of rebate agreements. In a separate step, schedule job RV15C005, which can
also be accessed via transaction âVB(Dâ (yes, thatâs the left parenthesis in the transaction code),
to automatically extend your agreements.
Manual payment
The âManual paymentâ section of the rebate agreement defines how much can be paid out during
a partial settlement. You would use partial settlements if, for example, the rebate agreement is
defined for a full year, but the payouts are supposed to happen on a monthly, quarterly, or any
custom defined schedule.
You can choose whether you want to allow partial settlements only in the amount of what you
accrued so far. This is a good idea if you donât want to pay out more than what the customer is
entitled to. However, you can also allow any payment amount, if you choose so. As with manual
accruals, you need to define the partial settlement order type, which is âB3â in the standard SAP
system. If you donât want to wait to reverse your accruals until the final settlement, you can do so
for the partial settlement by checking the âReverse accrualsâ box.
Just as with agreements, you can also schedule regular payments by entering the appropriate
calendar in the âSettlement periodsâ field. Use program RV15C001 (accessible through
transaction âVB(7â) to schedule your payment runs. This will create automatic payments
according to the defined schedule.
The reversal of the accruals is independent from the payment amount of the final settlement. For
example, if you accrued $10,000 over a given period, but the customer did not reach their sales
goal, you might want to pay only half that amount or nothing at all. No matter what the payment
amount is going to be, the total remaining accrued amount for the agreement is reversed.
Settlement
The âSettlementâ section defines the final settlement order type (âB1â in standard SAP) and the
minimum status that needs to be set in the agreement before it can finally be settled. This will
become more clear when we cover the actual settlement of a rebate agreement later in this
paper.
7. The standard correction order type âB2â is needed if the statistical and actual accrual amounts are
getting out of sync. This is mostly the case for retroactive rebates.
Definition of a Rebate Agreement
Condition Type Groups
I mentioned the assigned condition type group in the definition of the rebate agreement. With IMG
menu path Sales and Distribution>Billing>Rebate processing>Rebate agreements>Condition
type groups>Define condition type groups, you can freely define your rebate condition type group
(see Figure 6). Make sure that you leave the âCat.â (Category) field blank. This defines the
Condition Type Group as relevant for rebates. Sales deals share this configuration transaction
and would be identified with a category of âAâ.
8. Definition of Condition Type Groups
Assigning Condition Types to Condition Type Groups
In this configuration step (IMG Sales and Distribution>Billing>Rebate processing>Rebate
agreements>Condition type groups>Assign Condition Types/Tables To Condition Type Groups),
you define which condition tables, of which rebate condition types, you allow for a specific
Condition Type Group, and in which order they appear in the rebate agreement (see Figure 7).
Since the standard SAP rebate functionality does not allow exclusions in the access sequence,
the order of condition tables can be freely defined here. You can assign multiple condition types
that can have different access sequences.
9. Assigning Rebate Conditions to Condition Type Groups
Assignment of Condition Type Groups to Rebate Agreement Types
Finally, we are able to link the Condition Type Group to the Rebate Agreement Type through the
IMG menu path Sales and Distributions>Billing>Rebate Processing>Rebate
Agreements>Condition Type Groups>Assign Condition Type Groups to Rebate Agreement Types
Assignment of Condition Type Groups to Rebate Agreement Types
10. 2) Setting up Rebate Agreements
The rebate agreement is the central point for processing rebates. Here are the main tasks
that can be done out of this transaction:
⢠Define the payment method and validity of the rebate agreement.
⢠Define the condition records with rates and scales for which rebates should apply. NOTE:
You cannot create rebate condition records with the regular pricing transaction VK11 or
VK31. (This is due to the condition class of âCâ as indicated in the section above about
condition types.)
⢠Review all applied invoices to a specific rebate agreement.
⢠See which payments were already made and how much you accrued.
Generate partial and final settlements, as well as manual accruals. NOTE: If you attempt to
create any rebate credit memo manually with VA01, you will get an error. The reason for this
is the same as the one for the condition types. In order to track all payments within the rebate
agreement, they have to originate from that rebate agreement.
To create a rebate agreement execute transaction VBO1
11. On the next screen (Figure 10), enter the description of the rebate, the rebate recipient, the
currency in which the rebate payments are going to be made, the payment method, and the
validity period of the agreement. Here are some comments to the individual fields:
The rebate recipient has to be a payer partner. You also need to make sure that the payer partner
type that you are using (âRGâ in standard SAP) is linked to the account group you are using for
the sold-to (â0001â in standard SAP). As we can see later, the rebate recipient becomes the sold-
to in the rebate settlement credit memos.
The payment method defaults from the rebate agreement type configuration setting and can be
overwritten here. The same applies to the validity period. Originally the valid from date is
defaulted to todayâs date (as set in the agreement type). Since our sales department was (as
usual) late to give us the agreement information, we need to back-date the start date to the first of
the year. We assume that the rebate agreement is valid for the whole calendar year, but if you
want to do it by fiscal year, just adjust the dates to your liking. Once all this data is entered, click
on the âConditionsâ button to create rebate condition records.
Rebate Agreement Overview Screen
12. You can see that the validity period for the condition record defaults from the validity period of the
rebate agreement. As we defined in the agreement type, an attempt to change the validity period
(to one outside the agreement validity period) would result in an error. However, you can change
the validity period to one within the range of the agreement period. For example, if you set up the
agreement for the whole year and you pay out on a monthly basis with different amounts, it
makes sense to create multiple condition records with monthly validity dates.
If you enter a rate in Figure 12 and hit Enter, the same amount applies in the âAccrualsâ column. It
is important to remember, that the rate represents what you are going to pay to the customer, and
the accrual is what you accrue over time on invoices. This becomes very clear when you are
using scales. Although you are able to maintain different rates based on different scale levels of
sales achievements, you can only maintain one accrual rate.
The accrual rate applies on each invoice, at which time you donât know if a customer will reach
the next scale level over the time of the agreement. You might want to maintain an average
accrual rate (for example, if you have scale rates of 1, 2, and 3%, your accrual rate might be the
median of 2%). However, based on your accounting guidelines, you also might either over- or
under-accrue.
You also have the choice not to accrue at all (for example, for a lump sum payment) and can take
out the accrual rate entry. However, if you are trying to create partial settlements and configured
the agreement to not allow higher payments than what you accrued, you will have to create
manual accruals in order to do so.
13. Rebate Pricing Record Rates
Select the condition record and click on the âDetailsâ button.
At the bottom of the âControl Dataâ section of the details screen (see Figure 13), you can see that
the condition record was created retroactively. This means that not only will invoice line items
apply from this day forward, but also the ones that were created from the valid from-date of the
condition record, until todayâs date.
Since a rebate settlement in SAP is reflected as a credit memo request, a material number is
needed to generate the credit. The material for this credit memo is stored in field âMatl. f. settl.â
(Material for settlement). Since the key combination we choose is by customer, we need to define
a material of our choosing. For most of my clients, this always causes an issue with reporting,
since the materials that are actually being accrued on cannot be easily tied to the material of the
settlement. You will always have to choose a material if the material number is not part of your
condition table. In the latter case, the material number defaults as the settlement material.
If you like to create more condition records, use the green back-arrow to go to the âValid
Condition Types and Key Combinationsâ screen (see Figure 11). However, if you are done with
all your rebate pricing maintenance, you can now save the rebate agreement. At this point, I
would like to give some insight on the number of condition records you create per rebate
agreement. Although we allowed three different condition types to be maintained within
agreement type âZSRBâ, it does not mean that we have to maintain it in one and the same
agreement. It makes sense to distinguish multiple rebate agreements based on the type of rebate
you want to give. For our example we will create three separate rebate agreements: One for all
the items a customer purchases throughout the duration of the rebate, a second can be created
for the performance based (scale). and a third agreement for the material promotion.
14. This way, if you want to see the status of one of your rebate programs, you can look at it without
having to dissect other rebate conditions. It also improves performance since the system does not
have to read every invoice line item every time.
Another common mistake I often see is that instead of creating new rebate agreements (for
example, yearly renewals), clients just extend the validity end date of the agreement. The
problem with that scenario is that when you want to look online to see which invoice line items
applied to the rebate, the system has to look back at two or more years worth of data. Get your
mocha latte while the program is running. When you come back, you will realize that you timed
out of the transaction. Instead of increasing the validity period, it takes the same amount of time
to create a new rebate agreement with reference by clicking the button (see Figure 9). You can
also use the automated rebate agreement renewal transaction âVB(Dâ.
Rebate Condition Record Detail
Figure 14 shows you our condition record for condition type BO01 for which we wanted to set a
sales goal. The customer needs to buy $100,000 worth of Health Foods (represented by Volume
rebate group â01â of the material master) in order to get an additional 1% rebate. We will always
accrue 1% on all applicable invoices since we donât know at that time if the customer will reach
that goal. Once we create the final settlement, all applicable sales will be accumulated and
compared with the scale value. If the threshold is not met, nothing will be paid out, but all accrued
values will be reversed.
NOTE: The scale levels are always only applicable to the condition record they were created for.
You canât comply with a request like: âIf you buy $100,000 worth of item A, B and C âŚ,â if A, B
and C are not in some kind of grouping.
15. Scale View of Rebate Condition Record
After we have created our rebate agreement, we can check an invoice that has rebate conditions applied.
The service rendered date (not the pricing date!) of the invoice line item is used to determine the validity of
a rebate condition record. All rebate conditions are line item conditions, so go to the âConditionsâ tab of
one of your invoice line items.
16. You see in Figure 15 that two rebate conditions applied. BO02 for our material promotion with a $1.00/EA
allowance and the 3% of condition type BO03 for everything the customer buys. It is possible that the same
rebate condition type applies several times, unlike regular pricing conditions. You could for example have a
Headquarter rebate that pays 3% of all sales of a payer (BO03). In addition you have a rebate agreement
that pays an additional 1% for a specific sold-to customer (for example, a new store promotion). This is
also set up as a BO03 condition record. You would see both BO03 records, one with 3% and one with 1%.
Applied Rebate Conditions on an Invoice
Next, select one of the rebate condition types and click on the âDetailsâ button.
You can see that, although not specified explicitly in the rebate condition type configuration, the rebate
condition is automatically an accrual. The rebate agreement number to which the condition record belongs
to is also shown in the rebates section of this screen (see Figure 16). It is also indicated if the condition is
retroactive or not.
17. 3) Managing Rebate Agreements and Payments
Verification levels
After several invoices are created, we can access the rebate agreement either in change
(Transaction VBO2) or display mode (VBO3). To see which invoice line items applied, select the
âVerification levelâ button shown in Figure 10. Items that show accruals of 0 are invoice line items
that applied retroactively. Since the rebate agreement did not exist when they were created, no
accrual could be made. You can drill down to an individual invoice by clicking the invoice number
once. If you would like to change the level of detail shown, select the button on the âVerification
Levelâ screen shown in Figure 17. Remember that we set the verification level in customizing the
agreement type to âOpenâ, meaning every line item shows. It might make sense (if you have
thousands of invoice line items and you would like to just see totals by customer) to select
verification level âDâ. One annoying thing to note is that the month displayed is always the
calendar month, even if you set up your condition records by your fiscal month. This can lead to
misinterpretation of the data. This issue was addressed with SAP, but the answer was that the
system works as designed and that there are no plans for an enhancement.
As mentioned above, it can happen that the system times out if you are trying to review the
verification level online (due to the large number of applicable invoice line items). In this case, use
transaction âVB(8â, which lets you run a verification report in background
18. Creating Partial Settlements
As mentioned before, you can automate periodic creation of rebate payments. You need to
decide, based on the number of rebate agreements you have, and their complexity, if this option
makes sense. For example, it makes sense to schedule regular payments for rebates where the
customer gets a certain percentage for everything he buys. However, rebates that check scales
or need manual calculations or adjustments should be handled manually. In this paper, I will
explain how to create manual settlements.
In order to create any kind of settlement, you need to be in change mode (Transaction VBO2) of
the rebate agreement. Clicking the âPayâ âCreate Manual Rebate Paymentâ button will open the
partial settlement screen as seen in Figure 18. All condition records of this agreement are
displayed (in our example just one). In the âMax amountâ field you see the accrued amount as of
today, which, by our configuration setting, is the maximum amount we are able to pay in a partial
settlement. If we would enter a higher amount, we would get an error. Enter the amount you want
to pay in the âAmt. to be paidâ field. Note that the amount you enter always defaults as a negative
amount. Save your changes.
19. Partial Settlement Amount Screen
An information message is displayed that a partial rebate settlement was created.
NOTE: You cannot create a final settlement until all open settlement requests are posted to
accounting. The reason for that is the actual payments are updated in the rebate agreement only
at accounting time, to determine what is left to pay.
You can process the settlement request with transaction VA02. You need to release the credit
memo billing block before the request can be invoiced. Looking at the line item pricing screen
(see Figure 19), you see that only the rebate condition type appears, although the same pricing
procedure as the one on the invoice is used. There are two entries. One is to actually credit the
customer with the specified amount, the other one to reverse the accrual. Since we configured
the partial settlement in the agreement type to always reverse the accrual (See Figure 5), the
amounts are always the same in a partial settlement. Save the credit memo request and invoice
it.
If you realize you made a mistake before you invoice the credit memo request, you can delete the
credit memo request with transaction VA02, which will increase the available accrual amount in
the rebate agreement again. In case you already invoiced the settlement, you will need to cancel
the credit memo. Since you then cannot delete the credit memo request, you have to reject all the
line items.
20. Pricing Screen of Partial Settlement Credit Memo
Going back to the rebate agreement itself, you can see which settlements were already created
for this agreement. Select Rebate Payments>Rebate Documents and select the type of
document you would like to see. Partial and full settlements can be accessed separately. Since
we only created a partial settlement so far, this is the only option that is available. Click the check
mark and you will see all (in our case just one) partial settlements that were created for this
rebate agreement. Figure 20 shows the settlement amount (what was credited to the customer)
and the reversed accrual amount. If you would like to see the actual credit memo, click on the
invoice number (to select it) and the âDisplayâ button. If you have a credit memo request that is
not invoiced yet, you will see the credit memo request number here. This helps if you try to
determine if you have any âopenâ settlement documents for this rebate agreement.
21. Rebate Documents of a Rebate Agreement
Another view of payment data can be accessed from within the rebate condition record. Go into
the âBO03â condition record for your customer specific rebate and select âGoto-Payment dataâ.
This view (see Figure 21) shows you the total accrued dollars, how many accrual dollars were
reversed, and how much money was paid to the customer already. In the lower section of the
screen, it is indicated how much accrued money is left to pay out. From here you can also initiate
a partial settlement by entering a payment amount in field âAmount to be paidâ, just like weâve
done in Figure 18. The same check (process) for maximum accrued value occurs here.
Payment Data for a Rebate Condition Record
22. Manual Accruals
As I mentioned before, sometimes manual accruals need to be made in order to increase the accrued
amounts for a given condition record. The most likely scenario is when you create a rebate agreement in the
middle of the year, but set it retroactively valid for the whole year. The system will take previous invoices
into consideration, but no accruals for these invoices are accounted for. If we want to make partial
settlements, we would not have accrued as much as we would like to pay out. So we need to increase the
accrual amount by creating a manual accrual. In order to know how much we need to accrue in addition,
click the âSales volumeâ button on the Agreement Overview screen. The resulting screen (see Figure 22)
shows the actual eligible rebate amount (in our example $281.25) and the accrued amount ($102.48). We
need to create an accrual for the difference of $178.77.
This can be accomplished by clicking the button on the Agreement Overview screen. In the resulting screen
(see Figure 23), we can enter the accrual amount. A negative amount will increase the total accrual amount;
a positive amount will decrease it. Save the document and you will receive the message that a manual
accrual has been created. Invoice the credit memo request to post it to FI. Go back now to the rebate
agreement and check the sales volume. You will see that the accrual amount matches the eligible payout
amount.
23. Manual Accrual Payment Screen
Final Settlements
At the end of the rebate agreement, we finally can execute the final settlement to close the
agreement. As defined in the agreement type, we need to manually set the âAgreement statusâ
field on the Overview screen to âBâ (Agreement release for settlement). This is a manual check
that prevents us from accidentally closing the agreement. Then select the button from the
Overview screen. We are using our first rebate agreement, for which we did not create a manual
accrual. Although we only have $500 accrued, the final settlement shows what the customer is
eligible for, including retroactive amounts (see Figure 26). At this point in time, you could also pay
out more than this amount. Nothing will stop you from doing that, but I wonder what Sarbanes-
Oxley would say to that. Make your adjustments and save.
You could also have used the âCreate final settlementâ button from the rebate agreement
overview screen, which would have created a credit memo request right away, without giving you
the opportunity to manipulate the final payment amount.
After the credit memo request is created, the agreement status is set to âCâ, which prevents you
from creating any further settlements out of this rebate agreement.
24. Final Settlement Payment Screen
The final settlement credit memo request uses the last day of the agreement validity period as the
billing date. You can create it manually or via the same batch job (RV15C001) with which we can
create periodic partial settlements.
Invoice the credit memo request. Looking at the pricing screen of the credit memo (see Figure
27), you see that the payment amount is higher than the accrual amount, since we canât reverse
more than what we accrued for. In a case in which we wouldnât pay out anything (for example if
sales goals were not met), only the accrual amount would be reversed in a final settlement. Once
the credit memo is posted in FI, the agreement status changes to âDâ. This effectively closes the
rebate agreement.
25. Pricing Screen of Final Settlement Credit Memo
After the final settlement is executed, no changes can be made to the rebate agreement anymore. It can be
reviewed in display mode only.