This document provides product information for an architectural window manual from Cascade Windows. It includes an overview of window types, features, and specifications. The manual contains details on picture windows, horizontal sliders, single hung windows, casement windows, patio doors, and other window styles. Specifications include minimum and maximum sizes, performance ratings for air infiltration and water resistance, and structural ratings. Frame options and thermal performance ratings are also specified.
Este documento proporciona instrucciones para la instalación, mantenimiento e identificación de partes de acoplamientos estándar tipos HF41 y HF42 de tamaños 185 a 370 y 420 y 1420. Explica que los tamaños 185 a 370 usan poleas tipo QD ensambladas por Falk, mientras que los tamaños 420 y 1420 usan una polea integral manufacturada por Falk. También incluye tablas con especificaciones de fluidos, par de apriete de tornillos y dimensiones de cuñas.
This document provides information on various types of flexible grid couplings produced by CMDCouplings, including:
- The Winflex coupling, which features a special hub tooth design that increases contact surface with the grid proportionally to torque to maintain constant contact pressure.
- A range of coupling types for different applications, such as single cover, spacer, and overrunning clutch types.
- Technical specifications and dimensions for different coupling sizes, including nominal torque ratings, keyway and bore dimensions, weights, and maximum speed ratings.
- Information on selecting the proper coupling size based on calculated torque requirements and compatibility with shaft speeds and bores.
The document provides installation instructions for Cascade windows in 15 steps. It details how to properly store, handle, prepare the window opening, install flashing, apply sealant, install the window, secure it with fasteners, install insulation, ensure proper operation and clearance, and clean the window. Special instructions are provided for installing bay windows, flush-fin frames, accent windows, and sliding glass doors.
WinPro & Cascade Series windows offer a variety of styles and energy efficient options. They feature vinyl frames, dual pane glass, Low-E coatings, and warm edge spacers. A lifetime limited warranty covers defects. The WinPro Series provides sleek, contemporary styling while the Cascade Series has a distinctive traditional look. Both prioritize structural integrity, performance, and value.
This document provides information on window and sliding glass door styles, frame profiles, construction details, aesthetics, hardware, glass options, and warranties for various window series from Cascade Windows. It includes a table comparing the features and options available for the WinPro Series, Empire Series, Cascade Series, LbL Series, and ThermalPro Series. The table uses checkmarks and letters to indicate whether each feature is standard, an option, available, or not available for each series.
The document is an owner's manual from Marvin Windows and Doors that provides information on painting, staining, care and maintenance of their products. It includes sections on different window and door styles produced by Marvin as well as general instructions. The manual is intended to guide owners on proper upkeep and care of Marvin windows and doors.
This document is a product catalog that showcases Marvin Windows and Doors' window and door offerings. It provides descriptions and specifications for their Ultimate Casement Collection, which includes casement, awning, French casement, push out, and round top windows. It highlights features like revolutionary wash mode for easy cleaning, large maximum sizes, energy efficiency, and flexibility for new construction or replacement applications. The catalog also briefly profiles other Marvin product lines including double hung windows, bay windows, doors, and venting picture windows.
Este documento proporciona instrucciones para la instalación, mantenimiento e identificación de partes de acoplamientos estándar tipos HF41 y HF42 de tamaños 185 a 370 y 420 y 1420. Explica que los tamaños 185 a 370 usan poleas tipo QD ensambladas por Falk, mientras que los tamaños 420 y 1420 usan una polea integral manufacturada por Falk. También incluye tablas con especificaciones de fluidos, par de apriete de tornillos y dimensiones de cuñas.
This document provides information on various types of flexible grid couplings produced by CMDCouplings, including:
- The Winflex coupling, which features a special hub tooth design that increases contact surface with the grid proportionally to torque to maintain constant contact pressure.
- A range of coupling types for different applications, such as single cover, spacer, and overrunning clutch types.
- Technical specifications and dimensions for different coupling sizes, including nominal torque ratings, keyway and bore dimensions, weights, and maximum speed ratings.
- Information on selecting the proper coupling size based on calculated torque requirements and compatibility with shaft speeds and bores.
The document provides installation instructions for Cascade windows in 15 steps. It details how to properly store, handle, prepare the window opening, install flashing, apply sealant, install the window, secure it with fasteners, install insulation, ensure proper operation and clearance, and clean the window. Special instructions are provided for installing bay windows, flush-fin frames, accent windows, and sliding glass doors.
WinPro & Cascade Series windows offer a variety of styles and energy efficient options. They feature vinyl frames, dual pane glass, Low-E coatings, and warm edge spacers. A lifetime limited warranty covers defects. The WinPro Series provides sleek, contemporary styling while the Cascade Series has a distinctive traditional look. Both prioritize structural integrity, performance, and value.
This document provides information on window and sliding glass door styles, frame profiles, construction details, aesthetics, hardware, glass options, and warranties for various window series from Cascade Windows. It includes a table comparing the features and options available for the WinPro Series, Empire Series, Cascade Series, LbL Series, and ThermalPro Series. The table uses checkmarks and letters to indicate whether each feature is standard, an option, available, or not available for each series.
The document is an owner's manual from Marvin Windows and Doors that provides information on painting, staining, care and maintenance of their products. It includes sections on different window and door styles produced by Marvin as well as general instructions. The manual is intended to guide owners on proper upkeep and care of Marvin windows and doors.
This document is a product catalog that showcases Marvin Windows and Doors' window and door offerings. It provides descriptions and specifications for their Ultimate Casement Collection, which includes casement, awning, French casement, push out, and round top windows. It highlights features like revolutionary wash mode for easy cleaning, large maximum sizes, energy efficiency, and flexibility for new construction or replacement applications. The catalog also briefly profiles other Marvin product lines including double hung windows, bay windows, doors, and venting picture windows.
The Dyadic Systems Mechatronics Cylinder series is a versatile linear actuator system available from US$295. It integrates a motor, encoder, drive and program memory into a single package for high accuracy, long life and low cost. Models range from 10-50 kgf thrust and include standard and dust-proof options. This document provides an overview of the product specifications.
This document provides information on orbital tube cutting and bevelling machines. The TT-NG series features a robust split frame design that allows opening into two halves for clamping tubes. It can accurately cut and bevel tubes and pipes of various schedules and diameters. Accessories include copying carriages for correcting ovality, counterboring carriages, and trackers for larger diameters. The machines come equipped with tool holders and cutting/bevelling bits and can be customized with additional options.
This document provides product information for Honeywell magnetic locks, door strikes, egress devices, and exit switches. It includes specifications, ordering information, and finishes for various magnetic lock, door strike, request to exit button, and exit switch models. All of the listed products have been tested to work with Honeywell access control systems and provide reliable locking and egress solutions.
This document contains information about various types of industrial machinery from Italian manufacturers including:
- Printing machines from Digital Octopus and Gamma that can print on materials up to 180cm wide and have up to 8 printing units.
- Socks printing and knitting machines from Lonati and Sock Printing that can print detailed designs on socks in colors with precision of 0.1mm.
- Garment dyeing and washing machines from Falinox that can handle loads from 4-300kg and temperatures up to 135C, as well as yarn dyeing machines that can process loads up to 900kg.
- Drying systems including rotary dryers from Falinox up to 6m long and
The document summarizes the features and performance of the KONTRO Model GSA sealless magnet drive pump. It is an affordable alternative to conventional sealed pumps as it has no mechanical seals that can leak or fail. It uses a magnetic coupling to drive the impeller, eliminating the connection between the impeller and shaft. All wetted parts are contained in a rugged shell sealed by a single gasket. The pump is suitable for handling toxic or hazardous liquids due to its sealless and rugged design. It comes in 18 sizes up to 2000 GPM with materials of construction including 316SS, Alloy 20, and Alloy C. Typical applications include chemicals, heat transfer fluids, acids, and hydrocarbons.
This document contains specifications for several fans and blowers produced by Sunonwealth Electric Machine Industry Co., Ltd. It includes dimensions, voltage, speed, airflow, static pressure, noise level, and weight for each model. It also describes Sunon's capabilities in thermal analysis, fluid dynamics simulation, and customization of cooling solutions to optimize thermal performance and reduce temperatures for clients' products.
This document provides information on the Motor Valve 8038-GS3. It is a fast and high resolution motor valve for controlling neutral to aggressive media in various industries. It has a wafer type construction, is lightweight, and has low noise operation. It can control high differential pressures with small actuators and has fast stroking speeds. It is available in sizes from 1/2" to 10" with various pressure and temperature ratings depending on the model.
The document discusses hydraulic breakers made by Chicago Pneumatic. It summarizes that the RX breakers have fewer parts than traditional breakers, are easy to maintain, and are designed to handle tough jobs in all weather without issues. The document also provides specifications on 13 RX breaker models including their weight, carrier compatibility, and technical details.
This document provides specifications for three models of electric reciprocating process pumps. It lists the flow rate, horsepower requirements, maximum RPM, pressure range and dimensions for each standard and API model. Key features of the pumps include a triplex design for efficiency and low pulsation, durable dual V-packings for lubrication and cooling, and serviceable ceramic components from the top of the crankcase. Safety devices like pressure relief valves are recommended for use with the high pressure pumps.
This document provides technical specifications for a series of 360 Cassette air conditioner models. It includes specifications for each model such as cooling/heating capacity, power input, fan type, sound levels, dimensions, refrigerant type, and more. A capacity table is also included showing cooling capacities at different indoor and outdoor temperatures. The document aims to provide essential information on the performance, components, and specifications of the 360 Cassette air conditioner series to inform users.
The document introduces several mechatronics cylinder models from Dyadic Systems for linear actuation. Key points:
- The cylinders range in price from $295 to $455 and can provide thrusts from 10kgF to 50kgF, with strokes from 50mm to 1,000mm.
- Features include programmable positioning, speed, acceleration, I/O signals and more.
- Dyadic claims its integrated motor, encoder and drive results in high accuracy, long life and low cost compared to other actuators.
- The document provides specifications for each cylinder model as well as an overview of available accessories and technical support contacts.
This document provides information on MPI's melt pressure transducers, transmitters, and indicators. It includes:
- Descriptions of the MP100, MP200, and MPX series of rigid stem and flexible stem pressure transducers with options for connections, materials, ranges and accuracies.
- Descriptions of the MT100, MT200, and MTX series of pressure transmitters with options for output signals, connections, materials, ranges and accuracies.
- Ordering code information to specify models including pressure range, stem/connection type, output signal, materials and accuracy.
The document provides specifications for Samsung's DVM S WATER outdoor units, including the AM080FXWANR, AM100FXWANR, AM120FXWANR, and AM160FXWANR models. It lists key details like cooling and heating capacities, power consumption, compressor type, condenser type, piping connections, installation limitations, refrigerant type, sound levels, dimensions, and operating temperature ranges. The specifications are intended to help understand the performance and technical requirements of the outdoor units.
This document provides a catalog of accessories for circuit breaker testing equipment. It lists cables, software, application kits, static and dynamic resistance measurement devices, transducers, and other accessories. Key information included are product numbers, descriptions, and compatibility with different circuit breaker test instruments. Installation guidance and examples are also provided.
Dienhathe.com catalogue epcos-capacitor_phicap_b32344dDien Ha The
This document provides specifications for various film capacitors used for power factor correction. It includes information on construction, features, technical data, test data, design data, and specification tables for different capacitor types with varying voltages, frequencies, capacitances, dimensions, weights and quantities per box. The capacitors are designed for three-phase power factor correction applications.
This document provides specifications for various optical fiber cables, cable assemblies, enclosures, and accessories. It lists direct burial fiber optic cables of various core counts, universal duct fiber optic cables, indoor tight buffer cables, fiber optic patch cords, pigtails, rackmounted enclosures that fit different port counts, wallmounted and minibox enclosures, snap-in adapter plates, and joint enclosures. For each item, it provides the description, part number, specifications, features and benefits. It also provides ordering information formats for cables and assemblies.
This document lists various appliance parts and models, including:
- Desalinators from US Watermaker and Village Marine ranging from 400-1500 GPD and 250-1200 GPD respectively. Parts listed for the desalinators.
- Refrigerators and freezers from Nova Kool including single door fridge models from 1.9-5.3 cubic feet that operate on 12/24V DC power as well as AC/DC.
- Stoves, BBQs, heaters, air conditioners and other boat appliances also listed with various part numbers and specifications.
The Summit X770-32q is a 1RU switch with 32 QSFP+ 40GbE ports and 104 10GbE ports. It has redundant 550W AC or DC power supplies and front-to-back or back-to-front cooling options. The X770 provides high performance switching for aggregation, core, and top-of-rack applications.
This document provides information on various woodworking tools including table saws, jointers, planers, sanders, dust collectors, and air compressors. Key details include:
- Variable speed 12" wood lathe for $379.99 with faceplate, tool rests, spur center, live center, and safety accessories.
- 14" bandsaw with rip fence and resaw guide for $699 after $40 mail-in rebate.
- 17" drill press with safety guard and limit switch for $549.
- 10" and 14" cabinet saws with riving knife and blade guard systems starting at $1949. Larger 52" cabinet saws also available.
Channellock is launching a new line of high-performance ratchets, sockets, and wrenches exclusively at the store. The new tools offer improved grip with textured bands, easy identification of metric and SAE sockets with color bands, and better performance with the 72-tooth ratchet's 5 degree swing compared to the standard 10 degree. The store is also providing a free copy of the new Channellock catalog and features a lifetime warranty on all tools.
This document provides a table of contents and product listings for tools and tool accessories. It includes summaries of socket sets, wrenches, pliers, screwdrivers, and other items. Channellock brand tools are highlighted in blue text and are available exclusively at the store or online. The summary encourages customers to shop the store for their tool and workshop needs.
The Dyadic Systems Mechatronics Cylinder series is a versatile linear actuator system available from US$295. It integrates a motor, encoder, drive and program memory into a single package for high accuracy, long life and low cost. Models range from 10-50 kgf thrust and include standard and dust-proof options. This document provides an overview of the product specifications.
This document provides information on orbital tube cutting and bevelling machines. The TT-NG series features a robust split frame design that allows opening into two halves for clamping tubes. It can accurately cut and bevel tubes and pipes of various schedules and diameters. Accessories include copying carriages for correcting ovality, counterboring carriages, and trackers for larger diameters. The machines come equipped with tool holders and cutting/bevelling bits and can be customized with additional options.
This document provides product information for Honeywell magnetic locks, door strikes, egress devices, and exit switches. It includes specifications, ordering information, and finishes for various magnetic lock, door strike, request to exit button, and exit switch models. All of the listed products have been tested to work with Honeywell access control systems and provide reliable locking and egress solutions.
This document contains information about various types of industrial machinery from Italian manufacturers including:
- Printing machines from Digital Octopus and Gamma that can print on materials up to 180cm wide and have up to 8 printing units.
- Socks printing and knitting machines from Lonati and Sock Printing that can print detailed designs on socks in colors with precision of 0.1mm.
- Garment dyeing and washing machines from Falinox that can handle loads from 4-300kg and temperatures up to 135C, as well as yarn dyeing machines that can process loads up to 900kg.
- Drying systems including rotary dryers from Falinox up to 6m long and
The document summarizes the features and performance of the KONTRO Model GSA sealless magnet drive pump. It is an affordable alternative to conventional sealed pumps as it has no mechanical seals that can leak or fail. It uses a magnetic coupling to drive the impeller, eliminating the connection between the impeller and shaft. All wetted parts are contained in a rugged shell sealed by a single gasket. The pump is suitable for handling toxic or hazardous liquids due to its sealless and rugged design. It comes in 18 sizes up to 2000 GPM with materials of construction including 316SS, Alloy 20, and Alloy C. Typical applications include chemicals, heat transfer fluids, acids, and hydrocarbons.
This document contains specifications for several fans and blowers produced by Sunonwealth Electric Machine Industry Co., Ltd. It includes dimensions, voltage, speed, airflow, static pressure, noise level, and weight for each model. It also describes Sunon's capabilities in thermal analysis, fluid dynamics simulation, and customization of cooling solutions to optimize thermal performance and reduce temperatures for clients' products.
This document provides information on the Motor Valve 8038-GS3. It is a fast and high resolution motor valve for controlling neutral to aggressive media in various industries. It has a wafer type construction, is lightweight, and has low noise operation. It can control high differential pressures with small actuators and has fast stroking speeds. It is available in sizes from 1/2" to 10" with various pressure and temperature ratings depending on the model.
The document discusses hydraulic breakers made by Chicago Pneumatic. It summarizes that the RX breakers have fewer parts than traditional breakers, are easy to maintain, and are designed to handle tough jobs in all weather without issues. The document also provides specifications on 13 RX breaker models including their weight, carrier compatibility, and technical details.
This document provides specifications for three models of electric reciprocating process pumps. It lists the flow rate, horsepower requirements, maximum RPM, pressure range and dimensions for each standard and API model. Key features of the pumps include a triplex design for efficiency and low pulsation, durable dual V-packings for lubrication and cooling, and serviceable ceramic components from the top of the crankcase. Safety devices like pressure relief valves are recommended for use with the high pressure pumps.
This document provides technical specifications for a series of 360 Cassette air conditioner models. It includes specifications for each model such as cooling/heating capacity, power input, fan type, sound levels, dimensions, refrigerant type, and more. A capacity table is also included showing cooling capacities at different indoor and outdoor temperatures. The document aims to provide essential information on the performance, components, and specifications of the 360 Cassette air conditioner series to inform users.
The document introduces several mechatronics cylinder models from Dyadic Systems for linear actuation. Key points:
- The cylinders range in price from $295 to $455 and can provide thrusts from 10kgF to 50kgF, with strokes from 50mm to 1,000mm.
- Features include programmable positioning, speed, acceleration, I/O signals and more.
- Dyadic claims its integrated motor, encoder and drive results in high accuracy, long life and low cost compared to other actuators.
- The document provides specifications for each cylinder model as well as an overview of available accessories and technical support contacts.
This document provides information on MPI's melt pressure transducers, transmitters, and indicators. It includes:
- Descriptions of the MP100, MP200, and MPX series of rigid stem and flexible stem pressure transducers with options for connections, materials, ranges and accuracies.
- Descriptions of the MT100, MT200, and MTX series of pressure transmitters with options for output signals, connections, materials, ranges and accuracies.
- Ordering code information to specify models including pressure range, stem/connection type, output signal, materials and accuracy.
The document provides specifications for Samsung's DVM S WATER outdoor units, including the AM080FXWANR, AM100FXWANR, AM120FXWANR, and AM160FXWANR models. It lists key details like cooling and heating capacities, power consumption, compressor type, condenser type, piping connections, installation limitations, refrigerant type, sound levels, dimensions, and operating temperature ranges. The specifications are intended to help understand the performance and technical requirements of the outdoor units.
This document provides a catalog of accessories for circuit breaker testing equipment. It lists cables, software, application kits, static and dynamic resistance measurement devices, transducers, and other accessories. Key information included are product numbers, descriptions, and compatibility with different circuit breaker test instruments. Installation guidance and examples are also provided.
Dienhathe.com catalogue epcos-capacitor_phicap_b32344dDien Ha The
This document provides specifications for various film capacitors used for power factor correction. It includes information on construction, features, technical data, test data, design data, and specification tables for different capacitor types with varying voltages, frequencies, capacitances, dimensions, weights and quantities per box. The capacitors are designed for three-phase power factor correction applications.
This document provides specifications for various optical fiber cables, cable assemblies, enclosures, and accessories. It lists direct burial fiber optic cables of various core counts, universal duct fiber optic cables, indoor tight buffer cables, fiber optic patch cords, pigtails, rackmounted enclosures that fit different port counts, wallmounted and minibox enclosures, snap-in adapter plates, and joint enclosures. For each item, it provides the description, part number, specifications, features and benefits. It also provides ordering information formats for cables and assemblies.
This document lists various appliance parts and models, including:
- Desalinators from US Watermaker and Village Marine ranging from 400-1500 GPD and 250-1200 GPD respectively. Parts listed for the desalinators.
- Refrigerators and freezers from Nova Kool including single door fridge models from 1.9-5.3 cubic feet that operate on 12/24V DC power as well as AC/DC.
- Stoves, BBQs, heaters, air conditioners and other boat appliances also listed with various part numbers and specifications.
The Summit X770-32q is a 1RU switch with 32 QSFP+ 40GbE ports and 104 10GbE ports. It has redundant 550W AC or DC power supplies and front-to-back or back-to-front cooling options. The X770 provides high performance switching for aggregation, core, and top-of-rack applications.
This document provides information on various woodworking tools including table saws, jointers, planers, sanders, dust collectors, and air compressors. Key details include:
- Variable speed 12" wood lathe for $379.99 with faceplate, tool rests, spur center, live center, and safety accessories.
- 14" bandsaw with rip fence and resaw guide for $699 after $40 mail-in rebate.
- 17" drill press with safety guard and limit switch for $549.
- 10" and 14" cabinet saws with riving knife and blade guard systems starting at $1949. Larger 52" cabinet saws also available.
Channellock is launching a new line of high-performance ratchets, sockets, and wrenches exclusively at the store. The new tools offer improved grip with textured bands, easy identification of metric and SAE sockets with color bands, and better performance with the 72-tooth ratchet's 5 degree swing compared to the standard 10 degree. The store is also providing a free copy of the new Channellock catalog and features a lifetime warranty on all tools.
This document provides a table of contents and product listings for tools and tool accessories. It includes summaries of socket sets, wrenches, pliers, screwdrivers, and other items. Channellock brand tools are highlighted in blue text and are available exclusively at the store or online. The summary encourages customers to shop the store for their tool and workshop needs.
The document provides information about tools available for purchase from a hardware store or warehouse. It lists over 67,000 items under categories such as routers, sanders, grinders, planers, drills, saws, and more. It describes the features of sample tools in each category and provides the stock keeping unit number and price for each. The document encourages customers to shop in-store, online, or call to order if an item is needed but not in stock in the store.
This document is a 2015 product catalog for Delta and Peerless kitchen, bath and plumbing products. It includes kitchen faucets with pull-down, pull-out and single handle designs. It also includes bath faucets, shower systems, toilets and accessories. The catalog provides product images, descriptions and part numbers to help customers identify the appropriate products for their projects.
This document describes several lighting collections from Canarm Ltd., including:
1) The Warren Collection, an upper mid-level price point option with traditionally inspired designs in rubbed antique bronze finish and tea stained glass.
2) The Flamenco Collection, also an upper mid-level price point featuring classical curved lines with opal glass in brushed nickel.
3) Collections of vanity lights and interior lighting in various price points and styles to suit different room needs and budgets.
This document provides an overview and product listings for Home Impressions brand bathroom fixtures and accessories. It includes:
- An introduction to the Home Impressions line and benefits of the brand for retailers.
- Tables of contents and product listings for various categories including faucets, showerheads, bath accessories and more.
- Specifications and features for each product line.
The document aims to showcase the variety of styles and finishes available within the Home Impressions collection for retailers to offer customers comprehensive bathroom solutions. It highlights over 400 stock keeping units across 11 categories of fixtures.
This document provides information on ceiling fan assortments for different ceiling heights. The 12' ceiling fan assortment offers a variety of styles, sizes, finishes, and price points to appeal to different customers. The 8' assortment also varies in popular features while reducing sku count. The 4' assortment focuses on lower prices, sizes, and mounts to attract new customers. Each assortment aims to provide ceiling fans to suit different customer needs and budgets.
This document provides the pricing and order form for a SawStop jobsite saw and accessories. It lists the price for shipping a saw directly from SawStop to a customer as $100. It also provides the item descriptions, part numbers, prices and quantities for the 1.5HP jobsite saw and various blade cartridges, guards, inserts and blades that can be ordered. Shipping rates and notices that prices are subject to change without notice are also included.
The SawStop Jobsite Saw provides SawStop safety technology in a compact, portable design. It features an innovative one-turn blade elevation system, easy blade tilting, advanced dust collection, and a smooth-sliding fence for accuracy. The low-profile blade guard and quick-change riving knife increase safety while minimizing interference. Large wheels and a collapsible cart make it easy to transport the saw between job sites.
Western Building Center is having a pole barn special where 6x6 treated wood posts ranging from 8 to 20 feet long are $333 per linear foot and 36-inch metal roofing and siding is $180 per linear foot, with the sale ending on April 30, 2016.
Elkay is running a promotion from February 2nd to March 14th, 2016 in Region 2 that offers percentage discounts on cabinets based on price groups when a minimum of 10 cabinets are purchased. The discounts are 10% for price groups 7-12, 7% for price groups 1-6, and 5% for Silverline cabinets. To qualify for the discounts, orders must meet the 10 cabinet minimum, not be a special project, and be released and scheduled within 5 days of the promotion end date. Elkay reserves the right to amend or terminate the promotion.
Western Building Centers is having a sale from January 27th through February 26th with discounted prices on various tools, supplies, and hardware items. The document lists 25 different products on sale including windshield washer fluid for $1.59, DucTape for $2.19, a 14.5" magnetic floor sweeper for $16.47, a rubbermaid 32 gallon trash can for $22.97, and an 18 gauge Hitachi 2" brad nailer for $67.97. Most items are priced significantly lower than the suggested retail price. The sale is for stock on hand only and does not apply to dealer or big box store sales.
The document is a quote from Western Building Center for building materials for a 40x60 pole barn. It includes a list of materials such as treated lumber posts and beams, sheathing, roofing materials, and other items. The total cost of the quote is $23,000 including taxes. It provides the contractor with a complete list of all materials needed to build the pole barn.
The document is a quote from Western Building Center for materials for a 30x40 pole barn with two 10x10 overhead doors and one man door. It includes a list of building materials such as lumber, fasteners, roofing materials, and pre-engineered trusses. The total quote amount is not stated. The quote is addressed to Cash Account 0101 and expires on December 12, 2015.
This document is a quote from Western Building Center for materials to build a 24x24 pole barn with a 16x8 overhead door and one man door. It lists the various lumber, hardware, and metal roofing materials needed along with quantities, descriptions, and pricing. The total quote amount is not stated but includes items like 6x6 treated timbers, 2x6 and 2x8 boards, roofing screws, hanger straps, a door unit, and prefabricated metal roof pieces.
This document provides guidance on maintaining and finishing a log or wood home exterior. It discusses the importance of regular maintenance to preserve the home's appearance and protect the wood. Some key points covered include preparing the wood surface by cleaning and sanding, choosing an appropriate stain based on compatibility and performance, and applying a top coat. Regular inspections are recommended along with reapplying stain as needed, especially to sun-exposed sides of the home. Proper construction techniques like adequate eaves and drainage are also discussed to minimize wood exposure to elements.
The document describes Makita power tools that are on sale during the summer of 2015. It provides details on several Makita 18V lithium-ion cordless tool combo kits, individual tools, and accessories. These include hammer drills, impact drivers, circular saws, jigsaws, reciprocating saws, and more. Specifications such as voltage, battery type, torque output, weight, and included accessories are provided for each item.
This document provides information about various outdoor furniture sets for patio and backyard use, including chat sets, dining sets, and individual pieces. It describes the materials, features, and prices of multiple product lines. Some highlights include the Glenwood chat set made of durable PVC wicker, the Monaco curved sectional featuring all-weather resin wicker, and the Champlain chat set with a center fire table. Accessories like umbrellas, speakers, and beverage tables are also mentioned.
The document is a catalog for home décor and hardware products. It includes sections for cabinet and door hardware, lighting and fans, flooring, bath décor, kitchen accessories, and home enhancements. It encourages browsing the store or website for over 67,000 product options. The cover image shows mini pennant lights.
This document lists fencing materials for sale including 3” x 6'6” and 5” x 6'6” treated fence posts, 4” x 16'6” half round and treated rails, and 1”x6” x 6' cedar fencing. The items are available at Western Building Center located at 1019 East Idaho in Kalispell, Montana and can be purchased for the prices provided.
It’s no secret that the marketing landscape is growing increasingly complex, with numerous channels, privacy regulations, signal loss, and more. One of the biggest problems facing marketers today is that they’re experiencing data deluge and data drought simultaneously.
Bliss Point by Tinuti addresses these challenges by providing a single, user-friendly platform for measuring what marketers previously struggled to measure. With Bliss Point, you can move beyond simply validating past actions and instead use measurement to guide real-time decision-making on what should happen next.
Join our product experts for a live demonstration of Bliss Point. Discover how it can empower your brand with the tools and insights needed to optimize each channel, across your entire media mix, and your overall brand performance.
2. “CHANGING THE WAY YOU LOOK AT windows”
Product List & Performance pg. 2
Features & Benefits pg. 25
Horizontal Sliders pg. 28
Single Hungs pg. 38
Picture Windows pg. 46
Accent Windows pg. 55
Awnings pg. 65
Casements pg. 70
Patio Doors pg. 87
Bays & Bows pg. 95
Specifications pg. 98
Cascade Series pg. 108
Installation Instructions pg. 119
ARCHITECTURAL MANUAL
3. MODEL VISUAL PRODUCT DESCRIPTION PARAMETERS
9011 1-lite Picture Unit
11-1/2" min. 1 side dm.
40 Sq.Ft. max -
119-1/2" max. 1 side dim.
9021 2-lite Picture Unit w/ vert. T-bar
11-1/2" min. 1 side dm.
40 Sq.Ft. max -
119-1/2" max. 1 side dim.
9031 3-lite Picture Unit w/ vert. T-bars
40 Sq.Ft. max. (annealed)
120" max. 1 side dim.
104" x 78" max (temp)
9012 2-lite Picture Unit w/ horiz. T-bar
11-1/2" min. 1 side dm.
40 Sq.Ft. max -
119-1/2" max. 1 side dim.
9100 Single Vent Horizontal Slider
36 sqft max OA / 11-1/2" min. ht.
84" max. wd / 36" max.vent wd
23-1/2"x 15-1/2" min. OA
72" x 72" max. OA
9100P (P/XO)
Single Vent Horizontal Slider w/ Pic
above.
23-1/2" x 27-1/2" min.
71-1/2" x 83-1/2" max.
28 sqft max Pic
9100P (XO/P)
Single Vent Horizontal Slider w/ Pic
below.
23-1/2" x 27-1/2" min.
71-1/2" x 83-1/2" max.
28 sqft max Pic
9130 XOX Horizontal Slider
47-1/2" x 11-1/2" min.
119-1/2" x 59-1/2" max.
9130P (P/XOX) XOX Horizontal Slider w/ Pic above
49 Sq.Ft. Max
96" max 1 side
32 sqft max Pic. (cert. pending)
9130P (XOX/P) XOX Horizontal Slider w/ Pic below
49 Sq.Ft. Max
96" max 1 side
32 sqft max Pic. (cert. pending)
9200 Single Hung
11-1/2" min wd. (w/ 29-1/2" ht.)
47-1/2" max. wd
15-1/2" x 23-1/2" min. OA
47-1/2" x 95-1/2" max. OA
9210 Single Hung / Pic combination
23-1/2" x 23-1/2" min. OA
95-1/2" x 77-1/2" max. OA
9220 Twin Single Hung
23-1/2" x 23-1/2" min. OA
95-1/2" x 77-1/2" max. OA
9230
Single Hung / Pic / Single Hung
combination
35-1/2" x 23-1/2" min. OA
107-1/2"x 77-1/2" max. OA
9240 Pic / Single Hung / Pic combination
35-1/2" x 23-1/2" min. OA
107-1/2"x 77-1/2" max. OA
Cascade Windows Product Line Information
2
4. 9300 Single Casement
16" min. wd / 17-1/2" min. ht
35-1/2"x 59-1/2" or
29-1/2" x 71-1/2" max. OA
9310
Casement / Pic combination w/ T-
mullion
36"x 48" / 34"x60" / 24"x 66"
(max. vents)
33" x 16-1/2" min. OA
45 Sq.Ft. Max OA
9320 Double Casement
36"x 48" / 34"x60" / 24"x 66"
(max. vents)
33" x 16-1/2" min. OA
28 Sq.Ft. Max OA
9330
Casement / Pic / Casement
combination w/ T-mullion
36"x 48" / 34"x60" / 24"x 66"
(max. vents)
49-1/2" x 16-1/2" min. OA
45 Sq.Ft. Max OA
9301 Casement Picture Unit
16-1/2" min. 1 side dm.
40 Sq.Ft. max -
119-1/2" max. 1 side dim.
9400 Awning
19-1/2" min. wide
17-1/2" min. high
48" x 48" max.
9410 Awning / Pic combination
See Awning and Casement-
Pic parameters *Tests
pending
9400P
Pic over Awning combination w/ T-
mullion
See Awning and Casement-
Pic parameters *Tests
pending
9420 Double Awning
See Awning and Casement-
Pic parameters *Tests
pending
9700 XO or OX Patio Door
59-1/2" x 79-1/2" min.
95-1/2" x 95-1/2" max.
9730
3-panel Patio Door
(XO/O,OX/O,O/XO,O/OX)
88" x 79-1/2" min.
142" x 81-1/2" max.
9700P
XO or OX Patio Door w/ integral
transom lite 95-1/2" x 105-1/2" max.
9730P
3-panel Patio Door
(XO/O,OX/O,O/XO,O/OX) w/ integral
transom lite
88" x 105-1/2" or
106" x 95-1/2" max.
9011-AT Arch-Top Picture Unit
40 Sq.Ft. max
119-1/2" max. dim.
5-1/2" min. leg,
210" max radius
9011-HR Half-Round Picture Unit
32 Sq.Ft. Max
30" Min. wd
96" Max. wd
9011-FR Full-Round Picture Unit
36 Sq.Ft. Max.
30" Min. wd
72" Max. wd
9011-QR Quarter-Round Picture Unit
36 Sq.Ft. Max.
15" Min. wd
72" Max. wd3
5. 9011-QAT Quarter Arch-Top Picture Unit
40 Sq.Ft. Max.
15" Min. wd
72" Max. wd
210" Max.radius / 5-1/2" min.leg
9011-RT Round-Top Picture Unit
40 Sq.Ft. Max
30" Min. wd.
96" Max. wd.
9011-SEG Segment Picture Unit
40 Sq.Ft. Max.
15" Min. wd
72" Max. wd
210" Max.radius / 5-1/2" min.leg
9011-EB Eyebrow Picture Unit
40 Sq.Ft. Max.
48" Min. wd (w x .25 min. ht.)
119-1/2" Max. wd
210" Max.radius
9011-ELP Ellipse Picture Unit
40 Sq.Ft. Max.
48" Min. wd (w x .33 min. ht.)
95-1/2" Max. wd
9011-QRT Quarter-Round-Top Picture Unit
40 Sq.Ft. Max
15" Min. wd.
48" Max. wd.
9011-TRP Trapezoid Picture Unit
40 Sq.Ft. Max
5-1/2" Min. leg
9011-TRI (O) Offset Triangle Picture Unit
40 Sq.Ft. Max
6:12 Min. Pitch
9011-TRI (R)
90 degree Triangle Picture Unit (Right
hand)
40 Sq.Ft. Max
6:12 Min. Pitch
5-1/2" Min. leg
9011-TRI (L)
90 degree Triangle Picture Unit (Left
hand)
40 Sq.Ft. Max
6:12 Min. Pitch
5-1/2" Min. leg
9011-TRI (I)
Isosceles (3-equal sides) Triangle
Picture Unit
40 Sq.Ft. Max
6:12 Min. Pitch
9011-APN Angled Pentagon Picture Unit
40 Sq.Ft. Max
5-1/2" Min. leg
9011-PPN Peak Pentagon Picture Unit
40 Sq.Ft. Max
5-1/2" Min. leg
9011-HEX Hexagon Picture Unit
40 Sq.Ft. Max.
23-1/2" min. OA
9011-OCT Octagon Picture Unit
40 Sq.Ft. Max.
23-1/2" x 23-1/2" min. OA
9011-PAR Parallelogram Picture Unit
40 Sq.Ft. Max
6:12 Min. Pitch
9200-APN Angled Pentagon Single Hung
Same as 9200 plus:
24" Min. Short leg4
6. 9200-QAT Quarter-Arch-Top Single Hung
Same as 9200 plus:
24" Min. Short leg
210" Max. radius
9200-RT Round-Top Single Hung
Same as 9200 plus:
24" Min. Short leg
9200-QRT Quarter-Round-Top Single Hung
Same as 9200 plus:
24" Min. Short leg
9200-AT Arch-Top Single Hung
Same as 9200 plus:
24" Min. Short leg
210" Max. radius
9200-TRP Trapezoid Single Hung
Same as 9200 plus:
24" Min. Short leg
9200-PPN Peak Pentagon Single Hung
Same as 9200 plus:
24" Min. Short leg
Parameters are subject to change
5
7. Minimum and Maximum Sizing
for Common windows
Model Minimum overall size Maximum overall size
(Net Frame Dimensions)
Sliders:
9100 20-7/8" x 10-13/16" 36 sq ft, 72" max ht.
C9100 22-3/8" x 10-13/16" 36 sq ft., 72" max ht.
9130 31-5/16" x 10-13/16" (1/3, 1/3, 1/3) 60 sq ft. Max, 120" max width
C9130 31-9/16" x 10-13/16" 60 sq ft. Max, 144" max width
Single Hungs:
9200 10-3/4" x 21-3/8" 32 sq ft. Max, 48" max. width
C9200 10-3/4" x 22-7/8" 33.75 sq ft Max, 54" max. width
Picture Windows
9011 11" x 6" 40 sq ft max, 120" max. one dimension
(frames - std, N, F, S)
11" x 11"
(frames - J)
11" x 8"
(frame - Z)
9501 11" x 8" 48 sq.ft max., 120" max one dimension
Casements / Awnings
9300 16" x 10" 36" x 72"
9400 19-1/2" x 14-1/2" 48" x 48"
Special Note: Special Note:
These are absolute minimums. These maximums are based on
Most of the sizes listed in this tested and certified maximums.
column would require a minimum of Some allowances have also been made
a $50 list upcharge. to consider any items that may slightly
exceed certified maximums, but would
still be warrantable.
6
8. S eries Frame Code
WinPro
Cascade
Thermal-Pro
WinPro
Cascade
Thermal-Pro
WinPro
Cascade
Thermal-Pro
WinPro
Cascade
Thermal-Pro
WinPro
Cascade
Thermal-Pro
WinPro
Cascade
Thermal-Pro
W
W
W
F
F
F
J
J
(n/a)
K
K
(n/a)
N
(n/a)
N
Z
(n/a)
Z
Cascade Windows - Frame Options
Additional Frame options available: "R " = "F" frame profile on bottom only, with "W" frame at top and
sides, with nail fin removed.
"D" = "J" frame profile on bottom only with "W" frame at top and
sides, with nail fin removed.
Common Application
3-1/4" wide, 1-1/4" nail-fin setback
New construction - all exteriors
Available with 'R ipped Fin' for block-frame installations, and
wood double-hung replacement
3-1/4" wide, w/ dual-wall flush-fin (1-1/2")
R eplacement - stucco exterior, other exteriors
3-1/4" wide, w/ integral J-trim (3/4" x 3/4" channel)
New construction - vinyl siding exteriors
3" wide, w/ 1" setback fin and exterior edge lip.
New construction - stucco exterior
2-3/4" wide (at outer edge), 1-3/8" nail-fin setback
Aluminum window replacement - various exteriors
Available with 'R ipped Fin' for block-frame installations.
Full bottom support required (interior and exterior of
nail-fin)
2-3/4" wide, w/ stepped 1-7/8" flush-fin (z-bar)
R eplacement - stucco exterior, other exteriors
7
9. Structural Performance Ratings* (AAMA Certified)
Please Note: For the most recent version of this document
go to www.cascadewindows.com/products.
WinProSeries
EmpireSeries
CascadeSeries
LbLSeries
ThermalProSeries
Operation Test Size Air Infiltration (cfm/sqft)
Water Resistance
Test Pressure (psf)
Structural Rating
WinPro Series
Picture Fixed-O 79” X 79” < .01 14.6 F-C40
Slider XO 72” X 60” .08 5.4 HS-C35
Slider XOX 120” X 60” .08 4.6 HS-LC30
Single Hung H 48” X 72” .12 5.25 LC-PG35
Sliding Glass Door SGD-XO 72” X 82” .15 4.5 LC-PG35
Empire Series
Picture Fixed-O 79” X 79” < .01 14.6 F-C40
Slider XO 72” X 60” .08 5.4 HS-C35
Slider XOX 120” X 60” .08 4.6 HS-C30
Single Hung H 48” X 72” .06 5.25 LC-PG35
Cascade Series
Picture Fixed-O 96” X 79” < .01 12.12 LC-PG30
Slider XO 72” X 60” .08 5.4 HS-C35
Slider XOX 120” X 72” .11 3.76 HS-LC25
Single Hung H 48” X 72” .06 5.25 LC-PG35
Casement X 36” X 60” .01 12.0 LC-PG50
Awning X 48” X 32” < .01 6.0 LC-PG40
Sliding Glass Door SGD-XO 72” X 82” .15 4.5 LC-PG35
ThermalPro Series
Picture Fixed-O 79” X 79” < .01 14.6 F-C40
Slider XO 72” X 60” .08 5.4 HS-C35
Slider XOX 120” X 60” .08 4.6 HS-C30
Single Hung H 48” X 96” .06 5.25 LC-PG35
LbL 8000 Series
Tilt Double Hung TDH 48” X 77” .19 3.75 LC-PG25
Picture Fixed-O 108” X 72” .02 12 LC-PG30
Slider XXX 120” X 60” .09 3.75 LC-PG25
* Data shown on this sheet is subject to change based on test dates and
certification cycles. Data is based on results from certified tests and/or
simulations performed by accredited independent laboratories on products
manufactured by Cascade Windows. Actual product performance may vary.
Revised 1/24/2012
10. Thermal Performance Ratings* - NFRC Certified (Page 1 of 2)
Please Note: For the most recent version of this document
go to www.cascadewindows.com/products.
WinProSeries
EmpireSeries
CascadeSeries
LbLSeries
ThermalProSeries
Glass = Clear
Glass =
Ec
Thermal
Spacer =
Intercept
Glass =
Ec
Thermal
Spacer =
Intercept
w/ Argon Gas
Glass =
Ec
Thermal
Spacer =
SuperSpacer
Glass =
Ec
Thermal
Spacer =
SuperSpacer
w/ Argon Gas
Glass =
Ec+
Thermal
Spacer =
Intercept
Glass =
Ec+
Thermal
Spacer =
Intercept
w/ Argon Gas
Glass =
Ec+
Thermal
Spacer =
SuperSpacer
Glass =
Ec+
Thermal
Spacer =
SuperSpacer
w/ Argon Gas
WinPro Series
Picture
U-Values .47 .32 .28 .31 .26 .31 .27 .30 .26
SHGC .70 .35 .35 .35 .35 .25 .25 .25 .25
Slider
U-Values .49 .34 .30 .33 .29 .34 .30 .32 .28
SHGC .64 .32 .32 .32 .32 .23 .22 .23 .22
Single Hung
U-Values .49 .34 .30 .33 .29 .34 .30 .32 .28
SHGC .64 .32 .32 .32 .32 .23 .22 .23 .22
Sliding Glass Door
U-Values .48 .34 .30 .33 .29 .33 .29 .32 .28
SHGC .63 .33 .32 .33 .32 .23 .23 .23 .23
Empire Series
Picture
U-Values .47 .32 .28 .31 .26 .31 .27 .30 .26
SHGC .70 .35 .35 .35 .35 .25 .25 .25 .25
Slider
U-Values .49 .35 .31 .33 .29 .34 .31 .32 .28
SHGC .64 .32 .32 .32 .32 .23 .22 .23 .22
Single Hung
U-Values .49 .35 .31 .33 .29 .34 .31 .32 .28
SHGC .64 .32 .32 .32 .32 .23 .22 .23 .22
Cascade Series
Picture
U-Values .45 .31 .27 .30 .26 .31 .27 .30 .26
SHGC .64 .32 .32 .32 .32 .23 .22 .23 .22
Slider
U-Values .49 .35 .32 .33 .30 .35 .31 .33 .30
SHGC .59 .30 .30 .30 .30 .21 .21 .21 .21
Single Hung
U-Values .48 .35 .32 .34 .30 .35 .31 .33 .30
SHGC .59 .30 .30 .30 .30 .21 .21 .21 .21
Revised 11/11/2011
* These values are subject to change without notice, based on testing and certification
cycles. All Cascade Windows products may be ordered to meet or exceed Energy
Star requirements. Please visit www.energystar.gov to view specific US climate
zone requirements. SHGC values are shown with no internal dividers (aka grids or
muntins). Values shown are with standard reinforcement configurations.
11. Thermal Performance Ratings* - NFRC Certified (Page 2 of 2)
Please Note: For the most recent version of this document
go to www.cascadewindows.com/products.
Glass = Clear
Glass =
Ec
Thermal
Spacer =
Intercept
Glass =
Ec
Thermal
Spacer =
Intercept
w/ Argon Gas
Glass =
Ec
Thermal
Spacer =
SuperSpacer
Glass =
Ec
Thermal
Spacer =
SuperSpacer
w/ Argon Gas
Glass =
Ec+
Thermal
Spacer =
Intercept
Glass =
Ec+
Thermal
Spacer =
Intercept
w/ Argon Gas
Glass =
Ec+
Thermal
Spacer =
SuperSpacer
Glass =
Ec+
Thermal
Spacer =
SuperSpacer
w/ Argon Gas
Cascade Series (Continued)
Casement
U-Values .42 .30 .28 .29 .26 .30 .27 .29 .26
SHGC .52 .26 .26 .26 .26 .19 .19 .19 .19
Awning
U-Values .42 .30 .27 .29 .26 .30 .27 .29 .26
SHGC .52 .26 .26 .26 .26 .19 .19 .19 .19
Sliding Glass Door
U-Values .48 .34 .30 .33 .29 .33 .29 .32 .28
SHGC .63 .33 .32 .33 .32 .23 .23 .23 .23
ThermalPro Series
Picture
U-Values N/A N/A N/A .30 .26 N/A N/A .30 .26
SHGC N/A N/A N/A .35 .35 N/A N/A .25 .25
Slider
U-Values N/A N/A N/A .32 .29 N/A N/A .32 .28
SHGC N/A N/A N/A .32 .32 N/A N/A .23 .22
Single Hung
U-Values N/A N/A N/A .32 .29 N/A N/A .32 .28
SHGC N/A N/A N/A .32 .32 N/A N/A .23 .22
LbL Series
Picture (8000 Frame)
U-Values N/A N/A N/A .27 N/A N/A N/A N/A .27
SHGC N/A N/A N/A .33 N/A N/A N/A N/A .22
Double Slider (8000 Frame)
U-Values N/A N/A N/A .30 N/A N/A N/A N/A .30
SHGC N/A N/A N/A .31 N/A N/A N/A N/A .20
Double Hung (8000 Frame)
U-Values N/A N/A N/A .30 N/A N/A N/A N/A .30
SHGC N/A N/A N/A .30 N/A N/A N/A N/A .20
Sliding Glass Door (SGD 5000 Frame)
U-Values N/A N/A N/A .29 N/A N/A N/A N/A .29
SHGC N/A N/A N/A .34 N/A N/A N/A N/A .22
Revised 11/11/2011
* These values are subject to change without notice, based on testing and certification
cycles. All Cascade Windows products may be ordered to meet or exceed Energy
Star requirements. Please visit www.energystar.gov to view specific US climate
zone requirements. SHGC values are shown with no internal dividers (aka grids or
muntins). Values shown are with standard reinforcement configurations.
12. Model
T9011 Thermal-Pro Series Picture Window
Solar Heat Gain and Visual Light Transmittance
Glass Type Grid SHGC VLT
Type (Res.) (Res.)
Clear No 0.70 0.73
SolarBan60 No 0.35 0.65
SB60/SB60 No 0.33 0.58
SolarBan70 No 0.25 0.58
Grey No 0.51 0.48
Bronze No 0.55 0.54
Evergreen No 0.45 0.62
Solar Cool Bronze No 0.33 0.21
Solar Cool Grey No 0.25 0.14
Grey over SB60 No 0.31 0.43
Bronze over SB60 No 0.33 0.48
Evergreen over SB60 No 0.32 0.55
S.C. Brz over SB60 No 0.16 0.19
S.C. Grey over SB60 No 0.14 0.12
Clear R,S,P 0.63 0.66
SolarBan60 R,S,P 0.32 0.58
SB60/SB60 R,S,P 0.30 0.52
SolarBan70 R,S,P 0.22 0.52
Grey R,S,P 0.46 0.44
Bronze R,S,P 0.50 0.48
Evergreen R,S,P 0.41 0.55
Solar Cool Bronze R,S,P 0.30 0.19
Solar Cool Grey R,S,P 0.23 0.12
Grey over SB60 R,S,P 0.28 0.39
Bronze over SB60 R,S,P 0.30 0.43
Evergreen over SB60 R,S,P 0.29 0.49
S.C. Brz over SB60 R,S,P 0.15 0.17
S.C. Grey over SB60 R,S,P 0.12 0.11
Clear E 0.56 0.59
SolarBan60 E 0.29 0.52
SB60/SB60 E 0.27 0.46
SolarBan70 E 0.20 0.46
Grey E 0.42 0.39
Bronze E 0.45 0.43
Evergreen E 0.37 0.49
Solar Cool Bronze E 0.27 0.17
Solar Cool Grey E 0.21 0.11
Grey over SB60 E 0.26 0.34
Bronze over SB60 E 0.27 0.38
Evergreen over SB60 E 0.27 0.44
S.C. Brz over SB60 E 0.14 0.15
S.C. Grey over SB60 E 0.11 0.10
* Residential values shown. Non-residential values are available upon request.
Current values as of 1/07
Values may be subject to change based on certification cycles and / or modifications
to NFRC testing and simulation procedures. Please contact your Cascade Windows
representative for latest updated information.
10
13. Model
9011 Picture Window
Solar Heat Gain and Visual Light Transmittance
Glass Type Grid SHGC VLT
Type (Res.) (Res.)
Clear No 0.70 0.73
SolarBan60 No 0.35 0.65
SB60/SB60 No 0.33 0.58
SolarBan70 No 0.25 0.58
Grey No 0.51 0.48
Bronze No 0.55 0.54
Evergreen No 0.45 0.62
Solar Cool Bronze No 0.33 0.21
Solar Cool Grey No 0.25 0.14
Grey over SB60 No 0.31 0.43
Bronze over SB60 No 0.33 0.48
Evergreen over SB60 No 0.32 0.55
S.C. Brz over SB60 No 0.16 0.19
S.C. Grey over SB60 No 0.13 0.12
Clear R, S, P 0.63 0.66
SolarBan60 R, S, P 0.32 0.58
SB60/SB60 R, S, P 0.30 0.52
SolarBan70 R, S, P 0.22 0.52
Grey R, S, P 0.46 0.44
Bronze R, S, P 0.50 0.48
Evergreen R, S, P 0.41 0.55
Solar Cool Bronze R, S, P 0.30 0.19
Solar Cool Grey R, S, P 0.23 0.12
Grey over SB60 R, S, P 0.28 0.39
Bronze over SB60 R, S, P 0.30 0.43
Evergreen over SB60 R, S, P 0.29 0.49
S.C. Brz over SB60 R, S, P 0.15 0.17
S.C. Grey over SB60 R, S, P 0.12 0.11
Clear E 0.56 0.59
SolarBan60 E 0.29 0.33
SB60/SB60 E 0.27 0.46
SolarBan70 E 0.20 0.46
Grey E 0.42 0.39
Bronze E 0.45 0.43
Evergreen E 0.37 0.49
Solar Cool Bronze E 0.27 0.17
Solar Cool Grey E 0.21 0.11
Grey over SB60 E 0.26 0.34
Bronze over SB60 E 0.27 0.38
Evergreen over SB60 E 0.26 0.44
S.C. Brz over SB60 E 0.14 0.15
S.C. Grey over SB60 E 0.11 0.10
* Residential values shown. Non-residential values are available upon request.
Current values as of 1/07
Values may be subject to change based on certification cycles and / or modifications
to NFRC testing and simulation procedures. Please contact your Cascade Windows
representative for latest updated information.
11
14. Model
9100 Horizontal Slider
Solar Heat Gain and Visual Light Transmittance
Glass Type Grid SHGC VLT
Type (Res.) (Res.)
Clear No 0.64 0.67
SolarBan60 No 0.32 0.60
SB60/SB60 No 0.30 0.53
SolarBan70 No 0.23 0.53
Grey No 0.47 0.44
Bronze No 0.51 0.49
Evergreen No 0.42 0.56
Solar Cool Bronze No 0.31 0.19
Solar Cool Grey No 0.24 0.13
Grey over SB60 No 0.29 0.39
Bronze over SB60 No 0.31 0.44
Evergreen over SB60 No 0.30 0.50
S.C. Brz over SB60 No 0.15 0.17
S.C. Grey over SB60 No 0.13 0.11
Clear R,S,P 0.58 0.60
SolarBan60 R,S,P 0.29 0.53
SB60/SB60 R,S,P 0.27 0.47
SolarBan70 R,S,P 0.21 0.47
Grey R,S,P 0.43 0.40
Bronze R,S,P 0.46 0.44
Evergreen R,S,P 0.38 0.50
Solar Cool Bronze R,S,P 0.28 0.17
Solar Cool Grey R,S,P 0.21 0.11
Grey over SB60 R,S,P 0.26 0.35
Bronze over SB60 R,S,P 0.28 0.39
Evergreen over SB60 R,S,P 0.27 0.45
S.C. Brz over SB60 R,S,P 0.14 0.15
S.C. Grey over SB60 R,S,P 0.12 0.10
Clear E 0.51 0.53
SolarBan60 E 0.26 0.47
SB60/SB60 E 0.24 0.42
SolarBan70 E 0.19 0.42
Grey E 0.38 0.35
Bronze E 0.41 0.39
Evergreen E 0.34 0.45
Solar Cool Bronze E 0.25 0.15
Solar Cool Grey E 0.19 0.10
Grey over SB60 E 0.24 0.31
Bronze over SB60 E 0.25 0.35
Evergreen over SB60 E 0.24 0.40
S.C. Brz over SB60 E 0.13 0.13
S.C. Grey over SB60 E 0.11 0.09
* Residential values shown. Non-residential values are available upon request.
Current values as of 1/07
Values may be subject to change based on certification cycles and / or modifications
to NFRC testing and simulation procedures. Please contact your Cascade Windows
representative for latest updated information.
12
15. Model
9100 Horizontal Slider w/ EQS
Solar Heat Gain and Visual Light Transmittance
Glass Type Grid SHGC VLT
Type (Res.) (Res.)
Clear No 0.64 0.62
SolarBan60 No 0.32 0.55
SB60/SB60 No 0.30 0.49
SolarBan70 No 0.23 0.49
Grey No 0.47 0.41
Bronze No 0.51 0.45
Evergreen No 0.42 0.52
Solar Cool Bronze No 0.31 0.18
Solar Cool Grey No 0.24 0.12
Grey over SB60 No 0.29 0.16
Bronze over SB60 No 0.31 0.46
Evergreen over SB60 No 0.30 0.36
S.C. Brz over SB60 No 0.15 0.10
S.C. Grey over SB60 No 0.13 0.30
Clear R,S,P 0.58 0.55
SolarBan60 R,S,P 0.29 0.49
SB60/SB60 R,S,P 0.27 0.43
SolarBan70 R,S,P 0.21 0.43
Grey R,S,P 0.43 0.36
Bronze R,S,P 0.46 0.40
Evergreen R,S,P 0.38 0.46
Solar Cool Bronze R,S,P 0.28 0.16
Solar Cool Grey R,S,P 0.21 0.10
Grey over SB60 R,S,P 0.26 0.14
Bronze over SB60 R,S,P 0.28 0.41
Evergreen over SB60 R,S,P 0.27 0.32
S.C. Brz over SB60 R,S,P 0.14 0.09
S.C. Grey over SB60 R,S,P 0.12 0.27
Clear E 0.51 0.49
SolarBan60 E 0.26 0.43
SB60/SB60 E 0.24 0.38
SolarBan70 E 0.19 0.38
Grey E 0.38 0.32
Bronze E 0.41 0.36
Evergreen E 0.34 0.41
Solar Cool Bronze E 0.25 0.14
Solar Cool Grey E 0.19 0.09
Grey over SB60 E 0.24 0.12
Bronze over SB60 E 0.25 0.36
Evergreen over SB60 E 0.24 0.29
S.C. Brz over SB60 E 0.13 0.08
S.C. Grey over SB60 E 0.11 0.24
* Residential values shown. Non-residential values are available upon request.
Current values as of 1/07
Values may be subject to change based on certification cycles and / or modifications
to NFRC testing and simulation procedures. Please contact your Cascade Windows
representative for latest updated information.
13
16. Model
T9100 Thermal-Pro Series Horizontal Slider
Solar Heat Gain and Visual Light Transmittance
Glass Type Grid SHGC VLT
Type (Res.) (Res.)
SolarBan60 No 0.32 0.60
SB60/SB60 No 0.30 0.53
SolarBan70 No 0.23 0.53
Grey No 0.47 0.44
Bronze No 0.51 0.49
Evergreen No 0.42 0.56
Solar Cool Bronze No 0.31 0.19
Solar Cool Grey No 0.24 0.13
Grey over SB60 No 0.29 0.39
Bronze over SB60 No 0.31 0.44
Evergreen over SB60 No 0.30 0.50
S.C. Brz over SB60 No 0.15 0.17
S.C. Grey over SB60 No 0.13 0.11
SolarBan60 R,S,P 0.29 0.53
SB60/SB60 R,S,P 0.27 0.47
SolarBan70 R,S,P 0.21 0.47
Grey R,S,P 0.43 0.40
Bronze R,S,P 0.46 0.44
Evergreen R,S,P 0.38 0.50
Solar Cool Bronze R,S,P 0.28 0.17
Solar Cool Grey R,S,P 0.21 0.11
Grey over SB60 R,S,P 0.26 0.35
Bronze over SB60 R,S,P 0.28 0.39
Evergreen over SB60 R,S,P 0.27 0.45
S.C. Brz over SB60 R,S,P 0.14 0.15
S.C. Grey over SB60 R,S,P 0.12 0.10
SolarBan60 E 0.26 0.47
SB60/SB60 E 0.24 0.42
SolarBan70 E 0.19 0.42
Grey E 0.38 0.35
Bronze E 0.41 0.39
Evergreen E 0.34 0.45
Solar Cool Bronze E 0.25 0.15
Solar Cool Grey E 0.19 0.10
Grey over SB60 E 0.24 0.31
Bronze over SB60 E 0.25 0.35
Evergreen over SB60 E 0.24 0.40
S.C. Brz over SB60 E 0.13 0.13
S.C. Grey over SB60 E 0.11 0.09
* Residential values shown. Non-residential values are available upon request.
Current values as of 1/07
Values may be subject to change based on certification cycles and / or modifications
to NFRC testing and simulation procedures. Please contact your Cascade Windows
representative for latest updated information.
14
17. Model
9200 Single Hung
Solar Heat Gain and Visual Light Transmittance
Glass Type Grid SHGC VLT
Type (Res.) (Res.)
Clear No 0.64 0.67
SolarBan60 No 0.32 0.60
SB60/SB60 No 0.30 0.47
SolarBan70 No 0.23 0.53
Grey No 0.47 0.44
Bronze No 0.51 0.49
Evergreen No 0.42 0.56
Solar Cool Bronze No 0.31 0.19
Solar Cool Grey No 0.24 0.13
Grey over SB60 No 0.29 0.39
Bronze over SB60 No 0.31 0.44
Evergreen over SB60 No 0.30 0.50
S.C. Brz over SB60 No 0.15 0.17
S.C. Grey over SB60 No 0.13 0.11
Clear R,S,P 0.58 0.60
SolarBan60 R,S,P 0.29 0.53
SB60/SB60 R,S,P 0.27 0.47
SolarBan70 R,S,P 0.21 0.47
Grey R,S,P 0.43 0.40
Bronze R,S,P 0.46 0.44
Evergreen R,S,P 0.38 0.50
Solar Cool Bronze R,S,P 0.28 0.17
Solar Cool Grey R,S,P 0.21 0.11
Grey over SB60 R,S,P 0.26 0.35
Bronze over SB60 R,S,P 0.28 0.39
Evergreen over SB60 R,S,P 0.27 0.45
S.C. Brz over SB60 R,S,P 0.14 0.15
S.C. Grey over SB60 R,S,P 0.12 0.10
Clear E 0.51 0.53
SolarBan60 E 0.26 0.47
SB60/SB60 E 0.24 0.42
SolarBan70 E 0.19 0.42
Grey E 0.38 0.35
Bronze E 0.41 0.39
Evergreen E 0.34 0.45
Solar Cool Bronze E 0.25 0.15
Solar Cool Grey E 0.19 0.10
Grey over SB60 E 0.24 0.31
Bronze over SB60 E 0.25 0.35
Evergreen over SB60 E 0.24 0.40
S.C. Brz over SB60 E 0.13 0.13
S.C. Grey over SB60 E 0.11 0.09
* Residential values shown. Non-residential values are available upon request.
Current values as of 1/07
Values may be subject to change based on certification cycles and / or modifications
to NFRC testing and simulation procedures. Please contact your Cascade Windows
representative for latest updated information.
15
18. Model
9200 Single Hung w/ EQS
Solar Heat Gain and Visual Light Transmittance
Glass Type Grid SHGC VLT
Type (Res.) (Res.)
Clear No 0.64 0.62
SolarBan60 No 0.32 0.55
SB60/SB60 No 0.30 0.43
SolarBan70 No 0.23 0.49
Grey No 0.47 0.42
Bronze No 0.51 0.47
Evergreen No 0.42 0.53
Solar Cool Bronze No 0.31 0.18
Solar Cool Grey No 0.24 0.12
Grey over SB60 No 0.29 0.16
Bronze over SB60 No 0.31 0.47
Evergreen over SB60 No 0.30 0.37
S.C. Brz over SB60 No 0.15 0.11
S.C. Grey over SB60 No 0.13 0.31
Clear R,S,P 0.58 0.55
SolarBan60 R,S,P 0.29 0.49
SB60/SB60 R,S,P 0.27 0.43
SolarBan70 R,S,P 0.21 0.43
Grey R,S,P 0.43 0.37
Bronze R,S,P 0.46 0.42
Evergreen R,S,P 0.38 0.48
Solar Cool Bronze R,S,P 0.28 0.16
Solar Cool Grey R,S,P 0.21 0.11
Grey over SB60 R,S,P 0.26 0.14
Bronze over SB60 R,S,P 0.28 0.42
Evergreen over SB60 R,S,P 0.27 0.33
S.C. Brz over SB60 R,S,P 0.14 0.09
S.C. Grey over SB60 R,S,P 0.12 0.27
Clear E 0.51 0.49
SolarBan60 E 0.26 0.43
SB60/SB60 E 0.24 0.38
SolarBan70 E 0.19 0.38
Grey E 0.38 0.33
Bronze E 0.41 0.37
Evergreen E 0.34 0.42
Solar Cool Bronze E 0.25 0.14
Solar Cool Grey E 0.19 0.09
Grey over SB60 E 0.24 0.13
Bronze over SB60 E 0.25 0.37
Evergreen over SB60 E 0.24 0.29
S.C. Brz over SB60 E 0.13 0.08
S.C. Grey over SB60 E 0.11 0.24
* Residential values shown. Non-residential values are available upon request.
Current values as of 1/07
Values may be subject to change based on certification cycles and / or modifications
to NFRC testing and simulation procedures. Please contact your Cascade Windows
representative for latest updated information.
16
19. Model
T9200 Thermal-Pro Series Single Hung
Solar Heat Gain and Visual Light Transmittance
Glass Type Grid SHGC VLT
Type (Res.) (Res.)
SolarBan60 No 0.32 0.60
SB60/SB60 No 0.30 0.47
SolarBan70 No 0.23 0.53
Grey No 0.47 0.44
Bronze No 0.51 0.49
Evergreen No 0.42 0.56
Solar Cool Bronze No 0.31 0.19
Solar Cool Grey No 0.24 0.13
Grey over SB60 No 0.29 0.39
Bronze over SB60 No 0.31 0.44
Evergreen over SB60 No 0.30 0.50
S.C. Brz over SB60 No 0.15 0.17
S.C. Grey over SB60 No 0.13 0.11
SolarBan60 R,S,P 0.29 0.53
SB60/SB60 R,S,P 0.27 0.47
SolarBan70 R,S,P 0.21 0.47
Grey R,S,P 0.43 0.40
Bronze R,S,P 0.46 0.44
Evergreen R,S,P 0.38 0.50
Solar Cool Bronze R,S,P 0.28 0.17
Solar Cool Grey R,S,P 0.21 0.11
Grey over SB60 R,S,P 0.26 0.35
Bronze over SB60 R,S,P 0.28 0.39
Evergreen over SB60 R,S,P 0.27 0.45
S.C. Brz over SB60 R,S,P 0.14 0.15
S.C. Grey over SB60 R,S,P 0.12 0.10
SolarBan60 E 0.26 0.47
SB60/SB60 E 0.24 0.42
SolarBan70 E 0.19 0.42
Grey E 0.38 0.35
Bronze E 0.41 0.39
Evergreen E 0.34 0.45
Solar Cool Bronze E 0.25 0.15
Solar Cool Grey E 0.19 0.10
Grey over SB60 E 0.24 0.31
Bronze over SB60 E 0.25 0.35
Evergreen over SB60 E 0.24 0.40
S.C. Brz over SB60 E 0.13 0.13
S.C. Grey over SB60 E 0.11 0.09
* Residential values shown. Non-residential values are available upon request.
Current values as of 1/07
Values may be subject to change based on certification cycles and / or modifications
to NFRC testing and simulation procedures. Please contact your Cascade Windows
representative for latest updated information.
17
20. Model
9700 Sliding Patio Door
Solar Heat Gain and Visual Light Transmittance
Glass Type Grid SHGC VLT
Type (Res.) (Res.)
Clear No 0.63 0.68
SolarBan60 No 0.32 0.60
SB60/SB60 No 0.30 0.53
SolarBan70 No 0.23 0.53
Grey No 0.48 0.45
Bronze No 0.52 0.50
Evergreen No 0.43 0.58
Solar Cool Bronze No 0.31 0.20
Solar Cool Grey No 0.24 0.13
Grey over SB60 No 0.29 0.40
Bronze over SB60 No 0.31 0.45
Evergreen over SB60 No 0.30 0.51
S.C. Brz over SB60 No 0.15 0.17
S.C. Grey over SB60 No 0.13 0.11
Clear R,S,P 0.56 0.59
SolarBan60 R,S,P 0.29 0.53
SB60/SB60 R,S,P 0.27 0.47
SolarBan70 R,S,P 0.21 0.47
Grey R,S,P 0.43 0.40
Bronze R,S,P 0.46 0.44
Evergreen R,S,P 0.38 0.51
Solar Cool Bronze R,S,P 0.28 0.17
Solar Cool Grey R,S,P 0.21 0.11
Grey over SB60 R,S,P 0.26 0.35
Bronze over SB60 R,S,P 0.28 0.39
Evergreen over SB60 R,S,P 0.27 0.45
S.C. Brz over SB60 R,S,P 0.14 0.15
S.C. Grey over SB60 R,S,P 0.12 0.10
Clear E 0.49 0.52
SolarBan60 E 0.25 0.46
SB60/SB60 E 0.24 0.41
SolarBan70 E 0.18 0.41
Grey E 0.37 0.35
Bronze E 0.40 0.38
Evergreen E 0.33 0.44
Solar Cool Bronze E 0.24 0.15
Solar Cool Grey E 0.19 0.10
Grey over SB60 E 0.23 0.31
Bronze over SB60 E 0.25 0.34
Evergreen over SB60 E 0.24 0.39
S.C. Brz over SB60 E 0.12 0.13
S.C. Grey over SB60 E 0.10 0.09
* Residential values shown. Non-residential values are available upon request.
Current values as of 1/07
Values may be subject to change based on certification cycles and / or modifications
to NFRC testing and simulation procedures. Please contact your Cascade Windows
representative for latest updated information.
18
21. Model
9300 Casement
Solar Heat Gain and Visual Light Transmittance
Glass Type Grid SHGC VLT
Type (Res.) (Res.)
Clear No 0.52 0.54
SolarBan60 No 0.26 0.48
SB60/SB60 No 0.25 0.43
SolarBan70 No 0.19 0.43
Grey No 0.39 0.36
Bronze No 0.41 0.40
Evergreen No 0.34 0.46
Solar Cool Bronze No 0.25 0.16
Solar Cool Grey No 0.19 0.10
Grey over SB60 No 0.24 0.32
Bronze over SB60 No 0.25 0.35
Evergreen over SB60 No 0.24 0.41
S.C. Brz over SB60 No 0.13 0.14
S.C. Grey over SB60 No 0.10 0.09
Clear R,S,P 0.47 0.49
SolarBan60 R,S,P 0.24 0.43
SB60/SB60 R,S,P 0.22 0.39
SolarBan70 R,S,P 0.17 0.39
Grey R,S,P 0.35 0.32
Bronze R,S,P 0.38 0.36
Evergreen R,S,P 0.31 0.41
Solar Cool Bronze R,S,P 0.23 0.14
Solar Cool Grey R,S,P 0.18 0.09
Grey over SB60 R,S,P 0.22 0.29
Bronze over SB60 R,S,P 0.23 0.32
Evergreen over SB60 R,S,P 0.22 0.37
S.C. Brz over SB60 R,S,P 0.12 0.12
S.C. Grey over SB60 R,S,P 0.10 0.08
Clear E 0.43 0.44
SolarBan60 E 0.22 0.39
SB60/SB60 E 0.20 0.35
SolarBan70 E 0.16 0.35
Grey E 0.32 0.29
Bronze E 0.34 0.32
Evergreen E 0.28 0.37
Solar Cool Bronze E 0.21 0.13
Solar Cool Grey E 0.16 0.08
Grey over SB60 E 0.20 0.26
Bronze over SB60 E 0.21 0.29
Evergreen over SB60 E 0.20 0.33
S.C. Brz over SB60 E 0.11 0.11
S.C. Grey over SB60 E 0.09 0.07
* Residential values shown. Non-residential values are available upon request.
Current values as of 1/07
Values may be subject to change based on certification cycles and / or modifications
to NFRC testing and simulation procedures. Please contact your Cascade Windows
representative for latest updated information.
19
22. Model
9400 Awning
Solar Heat Gain and Visual Light Transmittance
Glass Type Grid SHGC VLT
Type (Res.) (Res.)
Clear No 0.52 0.54
SolarBan60 No 0.26 0.48
SB60/SB60 No 0.25 0.43
SolarBan70 No 0.19 0.43
Grey No 0.39 0.36
Bronze No 0.41 0.40
Evergreen No 0.34 0.46
Solar Cool Bronze No 0.25 0.16
Solar Cool Grey No 0.19 0.10
Grey over SB60 No 0.24 0.32
Bronze over SB60 No 0.25 0.35
Evergreen over SB60 No 0.24 0.41
S.C. Brz over SB60 No 0.13 0.14
S.C. Grey over SB60 No 0.10 0.09
Clear R,S,P 0.47 0.49
SolarBan60 R,S,P 0.24 0.43
SB60/SB60 R,S,P 0.22 0.39
SolarBan70 R,S,P 0.17 0.39
Grey R,S,P 0.35 0.32
Bronze R,S,P 0.38 0.36
Evergreen R,S,P 0.31 0.41
Solar Cool Bronze R,S,P 0.23 0.14
Solar Cool Grey R,S,P 0.18 0.09
Grey over SB60 R,S,P 0.22 0.29
Bronze over SB60 R,S,P 0.23 0.32
Evergreen over SB60 R,S,P 0.22 0.37
S.C. Brz over SB60 R,S,P 0.12 0.12
S.C. Grey over SB60 R,S,P 0.10 0.08
Clear E 0.43 0.44
SolarBan60 E 0.22 0.39
SB60/SB60 E 0.20 0.35
SolarBan70 E 0.16 0.35
Grey E 0.32 0.29
Bronze E 0.34 0.32
Evergreen E 0.28 0.37
Solar Cool Bronze E 0.21 0.13
Solar Cool Grey E 0.16 0.08
Grey over SB60 E 0.20 0.26
Bronze over SB60 E 0.21 0.29
Evergreen over SB60 E 0.20 0.33
S.C. Brz over SB60 E 0.11 0.11
S.C. Grey over SB60 E 0.09 0.07
* Residential values shown. Non-residential values are available upon request.
Current values as of 1/07
Values may be subject to change based on certification cycles and / or modifications
to NFRC testing and simulation procedures. Please contact your Cascade Windows
representative for latest updated information.
20
23. Model
9501 Cascade Series Picture Window
Solar Heat Gain and Visual Light Transmittance
Glass Type Grid SHGC VLT
Type (Res.) (Res.)
Clear No 0.64 0.67
SolarBan60 No 0.32 0.60
SB60/SB60 No 0.30 0.47
SolarBan70 No 0.23 0.53
Grey No 0.47 0.45
Bronze No 0.51 0.49
Evergreen No 0.42 0.57
Solar Cool Bronze No 0.30 0.19
Solar Cool Grey No 0.23 0.13
Grey over SB60 No 0.29 0.40
Bronze over SB60 No 0.31 0.44
Evergreen over SB60 No 0.30 0.50
S.C. Brz over SB60 No 0.15 0.17
S.C. Grey over SB60 No 0.12 0.11
Clear R,S,P 0.58 0.60
SolarBan60 R,S,P 0.29 0.53
SB60/SB60 R,S,P 0.27 0.44
SolarBan70 R,S,P 0.21 0.35
Grey R,S,P 0.43 0.40
Bronze R,S,P 0.46 0.44
Evergreen R,S,P 0.38 0.51
Solar Cool Bronze R,S,P 0.28 0.17
Solar Cool Grey R,S,P 0.21 0.11
Grey over SB60 R,S,P 0.26 0.35
Bronze over SB60 R,S,P 0.28 0.39
Evergreen over SB60 R,S,P 0.27 0.45
S.C. Brz over SB60 R,S,P 0.14 0.15
S.C. Grey over SB60 R,S,P 0.11 0.10
Clear E 0.52 0.53
SolarBan60 E 0.26 0.47
SB60/SB60 E 0.24 0.42
SolarBan70 E 0.19 0.42
Grey E 0.38 0.35
Bronze E 0.41 0.39
Evergreen E 0.34 0.45
Solar Cool Bronze E 0.25 0.15
Solar Cool Grey E 0.19 0.10
Grey over SB60 E 0.23 0.31
Bronze over SB60 E 0.25 0.35
Evergreen over SB60 E 0.24 0.40
S.C. Brz over SB60 E 0.13 0.14
S.C. Grey over SB60 E 0.11 0.09
* Residential values shown. Non-residential values are available upon request.
Current values as of 1/07
Values may be subject to change based on certification cycles and / or modifications
to NFRC testing and simulation procedures. Please contact your Cascade Windows
representative for latest updated information.
21
24. Model
C9100 Cascade Series Horizontal Slider
Solar Heat Gain and Visual Light Transmittance
Glass Type Grid SHGC VLT
Type (Res.) (Res.)
Clear No 0.59 0.62
SolarBan60 No 0.30 0.55
SB60/SB60 No 0.28 0.49
SolarBan70 No 0.21 0.49
Grey No 0.44 0.41
Bronze No 0.47 0.45
Evergreen No 0.39 0.52
Solar Cool Bronze No 0.28 0.18
Solar Cool Grey No 0.22 0.12
Grey over SB60 No 0.14 0.16
Bronze over SB60 No 0.28 0.46
Evergreen over SB60 No 0.27 0.36
S.C. Brz over SB60 No 0.12 0.16
S.C. Grey over SB60 No 0.12 0.10
Clear R,S,P 0.53 0.55
SolarBan60 R,S,P 0.27 0.49
SB60/SB60 R,S,P 0.25 0.43
SolarBan70 R,S,P 0.19 0.43
Grey R,S,P 0.39 0.36
Bronze R,S,P 0.42 0.40
Evergreen R,S,P 0.35 0.46
Solar Cool Bronze R,S,P 0.26 0.16
Solar Cool Grey R,S,P 0.20 0.10
Grey over SB60 R,S,P 0.13 0.32
Bronze over SB60 R,S,P 0.25 0.36
Evergreen over SB60 R,S,P 0.24 0.41
S.C. Brz over SB60 R,S,P 0.13 0.14
S.C. Grey over SB60 R,S,P 0.11 0.09
Clear E 0.47 0.49
SolarBan60 E 0.24 0.43
SB60/SB60 E 0.23 0.38
SolarBan70 E 0.17 0.38
Grey E 0.35 0.32
Bronze E 0.38 0.36
Evergreen E 0.31 0.41
Solar Cool Bronze E 0.23 0.14
Solar Cool Grey E 0.18 0.09
Grey over SB60 E 0.12 0.29
Bronze over SB60 E 0.22 0.32
Evergreen over SB60 E 0.22 0.36
S.C. Brz over SB60 E 0.12 0.12
S.C. Grey over SB60 E 0.10 0.08
* Residential values shown. Non-residential values are available upon request.
Current values as of 1/07
Values may be subject to change based on certification cycles and / or modifications
to NFRC testing and simulation procedures. Please contact your Cascade Windows
representative for latest updated information.
22
25. Model
C9200 Cascade Series Single Hung
Solar Heat Gain and Visual Light Transmittance
Glass Type Grid SHGC VLT
Type (Res.) (Res.)
Clear No 0.59 0.62
SolarBan60 No 0.30 0.55
SB60/SB60 No 0.28 0.49
SolarBan70 No 0.21 0.49
Grey No 0.45 0.42
Bronze No 0.48 0.47
Evergreen No 0.40 0.53
Solar Cool Bronze No 0.29 0.18
Solar Cool Grey No 0.22 0.12
Grey over SB60 No 0.27 0.37
Bronze over SB60 No 0.29 0.41
Evergreen over SB60 No 0.28 0.47
S.C. Brz over SB60 No 0.15 0.16
S.C. Grey over SB60 No 0.12 0.11
Clear R,S,P 0.53 0.55
SolarBan60 R,S,P 0.27 0.49
SB60/SB60 R,S,P 0.25 0.43
SolarBan70 R,S,P 0.19 0.43
Grey R,S,P 0.40 0.37
Bronze R,S,P 0.43 0.42
Evergreen R,S,P 0.36 0.48
Solar Cool Bronze R,S,P 0.26 0.16
Solar Cool Grey R,S,P 0.20 0.11
Grey over SB60 R,S,P 0.25 0.33
Bronze over SB60 R,S,P 0.26 0.37
Evergreen over SB60 R,S,P 0.26 0.42
S.C. Brz over SB60 R,S,P 0.13 0.14
S.C. Grey over SB60 R,S,P 0.11 0.11
Clear E 0.47 0.49
SolarBan60 E 0.24 0.43
SB60/SB60 E 0.23 0.38
SolarBan70 E 0.17 0.38
Grey E 0.36 0.33
Bronze E 0.39 0.37
Evergreen E 0.32 0.42
Solar Cool Bronze E 0.24 0.14
Solar Cool Grey E 0.18 0.09
Grey over SB60 E 0.22 0.29
Bronze over SB60 E 0.24 0.33
Evergreen over SB60 E 0.23 0.37
S.C. Brz over SB60 E 0.12 0.13
S.C. Grey over SB60 E 0.10 0.08
* Residential values shown. Non-residential values are available upon request.
Current values as of 1/07
Values may be subject to change based on certification cycles and / or modifications
to NFRC testing and simulation procedures. Please contact your Cascade Windows
representative for latest updated information.
23
26. STC Ratings
Test # Model Window description Window Glazing STC OITC
TL06-183 9100 Horizonal Sliding Window 3/4" o.a. - Lam over 1/8"(DS) 33 28
01-43913.01A 9100 Horizonal Sliding Window 3/4" o.a. - 3/16" over 1/8"(DS) 32 27
01-43913.01B 9100 Horizonal Sliding Window 3/4" o.a. - 5/32" over 1/8"(DS) 31 26
73099.01B 9100 Horizonal Sliding Window 3/4" o.a. - 3/32"(SS) over 1/8"(DS) 29 24
01-43913.01C 9100 Horizonal Sliding Window 3/4" o.a. - 1/8"(DS) over 1/8"(DS) 26 21
TL06-182 9100 Horizonal Sliding Window 3/4" o.a. - 3/32"(SS) over 3/32" (SS) 26 21
TL06-188 9200 Single Hung Window 3/4" o.a. - Lam over 1/8"(DS) 35 28
01-43915.01A 9200 Single Hung Window 3/4" o.a. - 3/16" over 1/8"(DS) 32 27
01-43915.01B 9200 Single Hung Window 3/4" o.a. - 5/32" over 1/8"(DS) 31 26
74549.01 9200 Single Hung Window 3/4" o.a. - 3/32"(SS) over 1/8"(DS) 29 24
01-43915.01C 9200 Single Hung Window 3/4" o.a. - 1/8"(DS) over 1/8"(DS) 26 21
TL06-187 9200 Single Hung Window 3/4" o.a. - 3/32"(SS) over 3/32" (SS) 26 21
TL06-177 9011 Picture Window 3/4" o.a. - Lam over 1/8"(DS) 33 27
01-43916.01A 9011 Picture Window 3/4" o.a. - 3/16" over 1/8"(DS) 30 24
01-43916.01B 9011 Picture Window 3/4" o.a. - 5/32" over 1/8"(DS) 30 24
01-43916.01C 9011 Picture Window 3/4" o.a. - 1/8"(DS) over 1/8"(DS) 27 22
TL06-186 9300 Casement Window 3/4" o.a. - Lam over 1/8"(DS) 37 30
01-43917.01A 9300 Casement Window 3/4" o.a. - 3/16" over 1/8"(DS) 34 28
01-43917.01B 9300 Casement Window 3/4" o.a. - 5/32" over 1/8"(DS) 33 26
01-43917.01C 9300 Casement Window 3/4" o.a. - 1/8"(DS) over 1/8"(DS) 27 21
TL06-185 9300 Casement Window 3/4" o.a. - 3/32"(SS) over 3/32" (SS) 26 23
TL06-184 9700 Sliding Glass Door 1" o.a. - Lam over 1/8" 34 27
01-43918.01A 9700 Sliding Glass Door 1" o.a. - 3/16" over 1/8" 32 26
01-43918.01C 9700 Sliding Glass Door 1" o.a. - 5/32" over 1/8" 29 24
01-43918.01B 9700 Sliding Glass Door 1" o.a. - 1/8" over 1/8" 29 23
TL06- C9100 Horizonal Sliding Window 3/4" o.a. - Lam over 1/8"(DS) 35 28
TL06-194 C9100 Horizonal Sliding Window 3/4" o.a. - 3/16" over 1/8"(DS) 34 28
TL06-176 C9100 Horizonal Sliding Window 3/4" o.a. - 5/32" over 1/8"(DS) 32 27
TL06-174 C9100 Horizonal Sliding Window 3/4" o.a. - 1/8"(DS) over 1/8"(DS) 28 23
TL06-173 C9100 Horizonal Sliding Window 3/4" o.a. - 3/32"(SS) over 3/32" (SS) 26 21
TL06-184 C9200 Single Hung Window 3/4" o.a. - Lam over 1/8"(DS) 34 27
TL06-192 C9200 Single Hung Window 3/4" o.a. - 3/16" over 1/8"(DS) 33 28
TL06-191 C9200 Single Hung Window 3/4" o.a. - 5/32" over 1/8"(DS) 32 27
TL06-190 C9200 Single Hung Window 3/4" o.a. - 1/8"(DS) over 1/8"(DS) 29 24
TL06-189 C9200 Single Hung Window 3/4" o.a. - 3/32"(SS) over 3/32" (SS) 27 21
TL06-181 9501 Picture Window 3/4" o.a. - Lam over 1/8"(DS) 34 28
TL06-180 9501 Picture Window 3/4" o.a. - 3/16" over 1/8"(DS) 32 27
TL06-179 9501 Picture Window 3/4" o.a. - 5/32" over 1/8"(DS) 31 27
TL06-178 9501 Picture Window 3/4" o.a. - 1/8"(DS) over 1/8"(DS) 28 23
Data current as of 7/07. Values shown are subject to change without notice based on testing
cycles and / or procedural changes. Data is based on results from certified tests and/or simulations
performed by accredited independent laboratories on products manufactured by Cascade Windows.
Actual product performance may vary. 24
27. “CHANGING THE WAY YOU LOOK AT windows”
Cascade Windows
engineers excel in
developing intelligent
design that brings
exceptional value to
our customers.
MAINFRAME Our window
mainframes feature a wide 31
/4"
frame depth with fusion-welded
corners. This gives you beautiful,
distinctive shadow lines and
improved window stability. When
the application requires, Cascade
offers a 23
/4" mainframe.
CELCON®
ROLLERS Our slider
windows feature Celcon rollers
mounted on stainless steel axles.
They provide years of durable service
without causing unsightly markings
often associated with other materials.
DESIGN INNOVATION
Frames Built to Last
REINFORCED MEETING RAILS
The meeting rails on many of our
single-hung and slider windows are
reinforced with steel. This steel
reinforcement provides rigidity to
enhance structural integrity and
forms a secure and stable platform
for locking hardware.
COMBINATION UNITS Cascade
offers a wide selection of window
combination units, bringing design
flexibility, functionality and
creativity to any window project.
Stability
Set-back fixed glass
Integrity
Fusion-welded corners
Strength
Reinforced meeting rails
Protection
Double weather-stripping
Construction
Heavy, multi-chambered frame
Almond
Color OptionsHandle & Lock Options
AutoLock
CamLock Patio Door Handle White
Secondary Lock
(Patio Door)
ClayCasement Multi-Point
Lock Lever
25
28. “CHANGING THE WAY YOU LOOK AT windows”
Warm Edge Spacer
Dual Pane Glass
Energy Efficiency
Solarban®
Low-E Glass
Superior WindowsWith rising energy costs and concern
for the environment, it is important
to choose energy efficient products.
Many Cascade windows meet the
Department of Energy’s Energy Star®
guidelines. We offer insulated glass
panels with high performance, heat
reflective coatings; warm edge
spacers and dual weather stripping.
Optimum efficiency is achieved by
combining our vinyl mainframes with
PPG’s patented Solarban®
glass and
our warm edge spacer technology.
These features further reduce energy
costs while increasing the comfort of
your home.
VINYL Cascade vinyl windows ensure
consistency of quality in materials,
lifespan, and maintenance. Our vinyl
windows never need painting, saving
you time and money. You will also
appreciate a reduction in energy
costs due to the energy saving
performance of Cascade windows.
DUAL PANE GLASS Windows have
improved dramatically since the
days when only a single pane of
glass stood between you and the
elements. Dual pane windows are
quieter and more energy efficient.
Plus, our windows are sealed with
formulated butylene sealant,
ensuring lasting performance.
LOW-E GLASS Cascade windows
deliver superior year-round
performance. High performance
glass coatings reflect outside heat
in the summer and interior heat in
the winter, reducing your air
conditioning and heating
requirements. Additionally,
Solarban®
coated glass blocks many
of the sun’s damaging ultraviolet
rays that can fade carpets, curtains,
and furniture.
WARM EDGE SPACER Cascade’s
Warm Edge Spacer system
conducts less heat through the
window. This technology can
significantly improve a home’s
overall energy efficiency.
Heat
Flow
ENERGY EFFICIENT QUALITY
26
29. “CHANGING THE WAY YOU LOOK AT windows”
AAMA & NFRC CERTIFIED
American Architectural Manufacturers Association
- tests for structural performance and integrity:
Air Infiltration
Water Infiltration
Structural Load
Forced Entry
National Fenestration Rating Council
- tests for thermal performance and integrity:
U-Value
Solar Heat Gain Coefficient
Visual Light Transmittance
Condensation Resistance
27
138. VINYL AWNINGS
MODEL 9400
CALLOUT ROUGH OPENING NET FRAME DAYLIGHT OPENING CLEAR OPENING
2020 24 X 24 23 1/2 X 23 1/2 17 3/8 X 17 3/8 N/A
2026 24 X 30 23 1/2 X 29 1/2 17 3/8 X 23 3/8 N/A
2030 24 X 36 23 1/2 X 35 1/2 17 3/8 X 29 3/8 N/A
2036 24 X 42 23 1/2 X 41 1/2 17 3/8 X 35 3/8 N/A
2040 24 X 48 23 1/2 X 47 1/2 17 3/8 X 41 3/8 N/A
2620 30 X 24 29 1/2 X 23 1/2 23 3/8 X 17 3/8 N/A
2626 30 X 30 29 1/2 X 29 1/2 23 3/8 X 23 3/8 N/A
2630 30 X 36 29 1/2 X 35 1/2 23 3/8 X 29 3/8 N/A
2636 30 X 42 29 1/2 X 41 1/2 23 3/8 X 35 3/8 N/A
2640 30 X 48 29 1/2 X 47 1/2 23 3/8 X 41 3/8 N/A
3020 36 X 24 35 1/2 X 23 1/2 29 3/8 X 17 3/8 N/A
3026 36 X 30 35 1/2 X 29 1/2 29 3/8 X 23 3/8 N/A
3030 36 X 36 35 1/2 X 35 1/2 29 3/8 X 29 3/8 N/A
3036 36 X 42 35 1/2 X 41 1/2 29 3/8 X 35 3/8 N/A
3040 36 X 48 35 1/2 X 47 1/2 29 3/8 X 41 3/8 N/A
3620 42 X 24 41 1/2 X 23 1/2 35 3/8 X 17 3/8 N/A
3626 42 X 30 41 1/2 X 29 1/2 35 3/8 X 23 3/8 N/A
3630 42 X 36 41 1/2 X 35 1/2 35 3/8 X 29 3/8 N/A
3636 42 X 42 41 1/2 X 41 1/2 35 3/8 X 35 3/8 N/A
3640 42 X 48 41 1/2 X 47 1/2 35 3/8 X 41 3/8 N/A
4020 48 X 24 47 1/2 X 23 1/2 41 3/8 X 17 3/8 N/A
4026 48 X 30 47 1/2 X 29 1/2 41 3/8 X 23 3/8 N/A
4030 48 X 36 47 1/2 X 35 1/2 41 3/8 X 29 3/8 N/A
4036 48 X 42 47 1/2 X 41 1/2 41 3/8 X 35 3/8 N/A
4040 48 X 48 47 1/2 X 47 1/2 41 3/8 X 41 3/8 N/A
AWNING WINDOWS DO NOT MEET EGRESS REQUIREMENTS
66
139. VINYL BOTTOM AWNINGS W/ DIRECT SET DEADLITE
MODEL 9400P
CALLOUT ROUGH OPENING NET FRAME DAYLIGHT OPENING CLEAR OPENING
2030 24 X 36 23 1/2 X 35 1/2 17 3/8 X 11 7/8 N/A
2036 24 X 42 23 1/2 X 41 1/2 17 3/8 X 14 7/8 N/A
2040 24 X 48 23 1/2 X 47 1/2 17 3/8 X 17 7/8 N/A
2046 24 X 54 23 1/2 X 53 1/2 17 3/8 X 20 7/8 N/A
2050 24 X 60 23 1/2 X 59 1/2 17 3/8 X 23 7/8 N/A
2056 24 X 66 23 1/2 X 65 1/2 17 3/8 X 26 7/8 N/A
2060 24 X 72 23 1/2 X 71 1/2 17 3/8 X 29 7/8 N/A
2630 30 X 36 29 1/2 X 35 1/2 23 3/8 X 11 7/8 N/A
2636 30 X 42 29 1/2 X 41 1/2 23 3/8 X 14 7/8 N/A
2640 30 X 48 29 1/2 X 47 1/2 23 3/8 X 17 7/8 N/A
2646 30 X 54 29 1/2 X 53 1/2 23 3/8 X 20 7/8 N/A
2650 30 X 60 29 1/2 X 59 1/2 23 3/8 X 23 7/8 N/A
2656 30 X 66 29 1/2 X 65 1/2 23 3/8 X 26 7/8 N/A
2660 30 X 72 29 1/2 X 71 1/2 23 3/8 X 29 7/8 N/A
3030 36 X 36 35 1/2 X 35 1/2 29 3/8 X 11 7/8 N/A
3036 36 X 42 35 1/2 X 41 1/2 29 3/8 X 14 7/8 N/A
3040 36 X 48 35 1/2 X 47 1/2 29 3/8 X 17 7/8 N/A
3046 36 X 54 35 1/2 X 53 1/2 29 3/8 X 20 7/8 N/A
3050 36 X 60 35 1/2 X 59 1/2 29 3/8 X 23 7/8 N/A
3056 36 X 66 35 1/2 X 65 1/2 29 3/8 X 26 7/8 N/A
3060 36 X 72 35 1/2 X 71 1/2 29 3/8 X 29 7/8 N/A
3630 42 X 36 41 1/2 X 35 1/2 35 3/8 X 11 7/8 N/A
3636 42 X 42 41 1/2 X 41 1/2 35 3/8 X 14 7/8 N/A
3640 42 X 48 41 1/2 X 47 1/2 35 3/8 X 17 7/8 N/A
3646 42 X 54 41 1/2 X 53 1/2 35 3/8 X 20 7/8 N/A
3650 42 X 60 41 1/2 X 59 1/2 35 3/8 X 23 7/8 N/A
3656 42 X 66 41 1/2 X 65 1/2 35 3/8 X 26 7/8 N/A
3660 42 X 72 41 1/2 X 71 1/2 35 3/8 X 29 7/8 N/A
4036 48 X 42 47 1/2 X 41 1/2 41 3/8 X 14 7/8 N/A
4040 48 X 48 47 1/2 X 47 1/2 41 3/8 X 17 7/8 N/A
4046 48 X 54 47 1/2 X 53 1/2 41 3/8 X 20 7/8 N/A
4050 48 X 60 47 1/2 X 59 1/2 41 3/8 X 23 7/8 N/A
4056 48 X 66 47 1/2 X 65 1/2 41 3/8 X 26 7/8 N/A
4060 48 X 72 47 1/2 X 71 1/2 41 3/8 X 29 7/8 N/A
AWNING WINDOWS DO NOT MEET EGRESS REQUIREMENTS
67
140. VINYL AWNINGS W/ DIRECT SET DEADLITE
MODEL 9410
CALLOUT ROUGH OPENING NET FRAME
DAYLIGHT OPENING
(ea. Unit) CLEAR OPENING
3020 36 X 24 35 1/2 X 23 1/2 11 7/8 X 17 3/8 N/A
3026 36 X 30 35 1/2 X 29 1/2 11 7/8 X 23 3/8 N/A
3030 36 X 36 35 1/2 X 35 1/2 11 7/8 X 29 3/8 N/A
3036 36 X 42 35 1/2 X 41 1/2 11 7/8 X 35 3/8 N/A
3040 36 X 48 35 1/2 X 47 1/2 11 7/8 X 41 3/8 N/A
3620 42 X 24 41 1/2 X 23 1/2 14 7/8 X 17 3/8 N/A
3626 42 X 30 41 1/2 X 29 1/2 14 7/8 X 23 3/8 N/A
3630 42 X 36 41 1/2 X 35 1/2 14 7/8 X 29 3/8 N/A
3636 42 X 42 41 1/2 X 41 1/2 14 7/8 X 35 3/8 N/A
3640 42 X 48 41 1/2 X 47 1/2 14 7/8 X 41 3/8 N/A
4020 48 X 24 47 1/2 X 23 1/2 17 7/8 X 17 3/8 N/A
4026 48 X 30 47 1/2 X 29 1/2 17 7/8 X 23 3/8 N/A
4030 48 X 36 47 1/2 X 35 1/2 17 7/8 X 29 3/8 N/A
4036 48 X 42 47 1/2 X 41 1/2 17 7/8 X 35 3/8 N/A
4040 48 X 48 47 1/2 X 47 1/2 17 7/8 X 41 3/8 N/A
4620 54 X 24 53 1/2 X 23 1/2 20 7/8 X 17 3/8 N/A
4626 54 X 30 53 1/2 X 29 1/2 20 7/8 X 23 3/8 N/A
4630 54 X 36 53 1/2 X 35 1/2 20 7/8 X 29 3/8 N/A
4636 54 X 42 53 1/2 X 41 1/2 20 7/8 X 35 3/8 N/A
4640 54 X 48 53 1/2 X 47 1/2 20 7/8 X 41 3/8 N/A
5020 60 X 24 59 1/2 X 23 1/2 23 7/8 X 17 3/8 N/A
5026 60 X 30 59 1/2 X 29 1/2 23 7/8 X 23 3/8 N/A
5030 60 X 36 59 1/2 X 35 1/2 23 7/8 X 29 3/8 N/A
5036 60 X 42 59 1/2 X 41 1/2 23 7/8 X 35 3/8 N/A
5040 60 X 48 59 1/2 X 47 1/2 23 7/8 X 41 3/8 N/A
6020 72 X 24 71 1/2 X 23 1/2 29 7/8 X 17 3/8 N/A
6026 72 X 30 71 1/2 X 29 1/2 29 7/8 X 23 3/8 N/A
6030 72 X 36 71 1/2 X 35 1/2 29 7/8 X 29 3/8 N/A
6036 72 X 42 71 1/2 X 41 1/2 29 7/8 X 35 3/8 N/A
6040 72 X 48 71 1/2 X 47 1/2 29 7/8 X 41 3/8 N/A
7020 84 X 24 83 1/2 X 23 1/2 35 7/8 X 17 3/8 N/A
7026 84 X 30 83 1/2 X 29 1/2 35 7/8 X 23 3/8 N/A
7030 84 X 36 83 1/2 X 35 1/2 35 7/8 X 29 3/8 N/A
7036 84 X 42 83 1/2 X 41 1/2 35 7/8 X 35 3/8 N/A
7040 84 X 48 83 1/2 X 47 1/2 35 7/8 X 41 3/8 N/A
8020 96 X 24 95 1/2 X 23 1/2 41 7/8 X 17 3/8 N/A
8026 96 X 30 95 1/2 X 29 1/2 41 7/8 X 23 3/8 N/A
8030 96 X 36 95 1/2 X 35 1/2 41 7/8 X 29 3/8 N/A
8036 96 X 42 95 1/2 X 41 1/2 41 7/8 X 35 3/8 N/A
AWNING WINDOWS DO NOT MEET EGRESS REQUIREMENTS
68
141. VINYL DOUBLE AWNINGS
MODEL 9420
CALLOUT NET FRAME
DAYLIGHT OPENING (ea.
Unit) CLEAR OPENING
3620 42 X 24 41 1/2 X 23 1/2 14 7/8 X 17 3/8 N/A
3626 42 X 30 41 1/2 X 29 1/2 14 7/8 X 23 3/8 N/A
3630 42 X 36 41 1/2 X 35 1/2 14 7/8 X 29 3/8 N/A
3636 42 X 42 41 1/2 X 41 1/2 14 7/8 X 35 3/8 N/A
4020 48 X 24 47 1/2 X 23 1/2 17 7/8 X 17 3/8 N/A
4026 48 X 30 47 1/2 X 29 1/2 17 7/8 X 23 3/8 N/A
4030 48 X 36 47 1/2 X 35 1/2 17 7/8 X 29 3/8 N/A
4636 48 X 42 47 1/2 X 41 1/2 17 7/8 X 35 3/8 N/A
4620 54 X 24 53 1/2 X 23 1/2 20 7/8 X 17 3/8 N/A
4626 54 X 30 53 1/2 X 29 1/2 20 7/8 X 23 3/8 N/A
4630 54 X 36 53 1/2 X 35 1/2 20 7/8 X 29 3/8 N/A
4636 54 X 42 53 1/2 X 41 1/2 20 7/8 X 35 3/8 N/A
5020 60 X 24 59 1/2 X 23 1/2 23 7/8 X 17 3/8 N/A
5026 60 X 30 59 1/2 X 29 1/2 23 7/8 X 23 3/8 N/A
5030 60 X 36 59 1/2 X 35 1/2 23 7/8 X 29 3/8 N/A
5036 60 X 42 59 1/2 X 41 1/2 23 7/8 X 35 3/8 N/A
6020 72 X 24 71 1/2 X 23 1/2 29 7/8 X 17 3/8 N/A
6026 72 X 30 71 1/2 X 29 1/2 29 7/8 X 23 3/8 N/A
6030 72 X 36 71 1/2 X 35 1/2 29 7/8 X 29 3/8 N/A
6036 72 X 42 71 1/2 X 41 1/2 29 7/8 X 35 3/8 N/A
7020 84 X 24 83 1/2 X 23 1/2 35 7/8 X 17 3/8 N/A
7026 84 X 30 83 1/2 X 29 1/2 35 7/8 X 23 3/8 N/A
7030 84 X 36 83 1/2 X 35 1/2 35 7/8 X 29 3/8 N/A
7036 84 X 42 83 1/2 X 41 1/2 35 7/8 X 35 3/8 N/A
8020 96 X 24 95 1/2 X 23 1/2 41 7/8 X 17 3/8 N/A
8026 96 X 30 95 1/2 X 29 1/2 41 7/8 X 23 3/8 N/A
8030 96 X 36 95 1/2 X 35 1/2 41 7/8 X 29 3/8 N/A
8036 96 X 42 95 1/2 X 41 1/2 41 7/8 X 35 3/8 N/A
AWNING WINDOWS DO NOT MEET EGRESS REQUIREMENTS
ROUGH OPENING
69
151. J-2
VINYL SINGLE CASEMENT
MODEL 9300
CALLOUT NET FRAME DAYLIGHT OPENING
1620 18 X 24 17 1/2 X 23 1/2 11 3/8 X 17 3/8 5 9/16 X 17 3/8
1626 18 X 30 17 1/2 X 29 1/2 11 3/8 X 23 3/8 5 9/16 X 23 3/8
1630 18 X 36 17 1/2 X 35 1/2 11 3/8 X 29 3/8 5 9/16 X 29 3/8
1636 18 X 42 17 1/2 X 41 1/2 11 3/8 X 35 3/8 5 9/16 X 35 3/8
1640 18 X 48 17 1/2 X 47 1/2 11 3/8 X 41 3/8 5 9/16 X 41 3/8
1646 18 X 54 17 1/2 X 53 1/2 11 3/8 X 47 3/8 5 9/16 X 47 3/8
1650 18 X 60 17 1/2 X 59 1/2 11 3/8 X 53 3/8 5 9/16 X 53 3/8
2020 24 X 24 23 1/2 X 23 1/2 17 3/8 X 17 3/8 11 9/16 X 17 3/8
2026 24 X 30 23 1/2 X 29 1/2 17 3/8 X 23 3/8 11 9/16 X 23 3/8
2030 24 X 36 23 1/2 X 35 1/2 17 3/8 X 29 3/8 11 9/16 X 29 3/8
2036 24 X 42 23 1/2 X 41 1/2 17 3/8 X 35 3/8 11 9/16 X 35 3/8
2040 24 X 48 23 1/2 X 47 1/2 17 3/8 X 41 3/8 11 9/16 X 41 3/8
2046 24 X 54 23 1/2 X 53 1/2 17 3/8 X 47 3/8 11 9/16 X 47 3/8
2050 24 X 60 23 1/2 X 59 1/2 17 3/8 X 53 3/8 11 9/16 X 53 3/8
2620 30 X 24 29 1/2 X 23 1/2 23 3/8 X 17 3/8 17 9/16 X 17 3/8
2626 30 X 30 29 1/2 X 29 1/2 23 3/8 X 23 3/8 17 9/16 X 23 3/8
2630 30 X 36 29 1/2 X 35 1/2 23 3/8 X 29 3/8 17 9/16 X 29 3/8
2636 30 X 42 29 1/2 X 41 1/2 23 3/8 X 35 3/8 17 9/16 X 35 3/8
**2640 30 X 48 29 1/2 X 47 1/2 23 3/8 X 41 3/8 17 9/16 X 41 3/8
**2646 30 X 54 29 1/2 X 53 1/2 23 3/8 X 47 3/8 17 9/16 X 47 3/8
**2650 30 X 60 29 1/2 X 59 1/2 23 3/8 X 53 3/8 17 9/16 X 53 3/8
21020 34 X 24 33 1/2 X 23 1/2 27 3/8 X 17 3/8 21 9/16 X 17 3/8
21026 34 X 30 33 1/2 X 29 1/2 27 3/8 X 23 3/8 21 9/16 X 23 3/8
21030 34 X 36 33 1/2 X 35 1/2 27 3/8 X 29 3/8 21 9/16 X 29 3/8
**21036 34 X 42 33 1/2 X 41 1/2 27 3/8 X 35 3/8 21 9/16 X 35 3/8
*21040 34 X 48 33 1/2 X 47 1/2 27 3/8 X 41 3/8 21 9/16 X 41 3/8
*21046 34 X 54 33 1/2 X 53 1/2 27 3/8 X 47 3/8 21 9/16 X 47 3/8
*21050 34 X 60 33 1/2 X 59 1/2 27 3/8 X 53 3/8 21 9/16 X 53 3/8
3026 36 X 30 35 1/2 X 29 1/2 29 3/8 X 23 3/8 23 9/16 X 23 3/8
**3030 36 X 36 35 1/2 X 35 1/2 29 3/8 X 29 3/8 23 9/16 X 29 3/8
*3036 36 X 42 35 1/2 X 41 1/2 29 3/8 X 35 3/8 23 9/16 X 35 3/8
*3040 36 X 48 35 1/2 X 47 1/2 29 3/8 X 41 3/8 23 9/16 X 41 3/8
ROUGH OPENING CLEAR OPENING
* Meets Egress
**Meets Egress with Egress Hardware
NOTE: All dimensions are given as width x height.
• Clear opening sizes calculated using standard hinges.
• When using egress hardware – Add 4-3/8” to Clear Opening width.
71
153. J-4
VINYL SINGLE CASEMENT W/ DEADLITE
MODEL 9310
CALLOUT ROUGH OPENING NET FRAME
DAYLIGHT OPENING
(each side) CLEAR OPENING
3020 36 X 24 35 1/2 X 23 1/2 11 7/8 X 17 3/8 6 1/16 X 17 3/8
3026 36 X 30 35 1/2 X 29 1/2 11 7/8 X 23 3/8 6 1/16 X 23 3/8
3030 36 X 36 35 1/2 X 35 1/2 11 7/8 X 29 3/8 6 1/16 X 29 3/8
3036 36 X 42 35 1/2 X 41 1/2 11 7/8 X 35 3/8 6 1/16 X 35 3/8
3040 36 X 48 35 1/2 X 47 1/2 11 7/8 X 41 3/8 6 1/16 X 41 3/8
3046 36 X 54 35 1/2 X 53 1/2 11 7/8 X 47 3/8 6 1/16 X 47 3/8
3050 36 X 60 35 1/2 X 59 1/2 11 7/8 X 53 3/8 6 1/16 X 53 3/8
3620 42 X 24 41 1/2 X 23 1/2 14 7/8 X 17 3/8 9 1/16 X 17 3/8
3626 42 X 30 41 1/2 X 29 1/2 14 7/8 X 23 3/8 9 1/16 X 23 3/8
3630 42 X 36 41 1/2 X 35 1/2 14 7/8 X 29 3/8 9 1/16 X 29 3/8
3636 42 X 42 41 1/2 X 41 1/2 14 7/8 X 35 3/8 9 1/16 X 35 3/8
3640 42 X 48 41 1/2 X 47 1/2 14 7/8 X 41 3/8 9 1/16 X 41 3/8
3646 42 X 54 41 1/2 X 53 1/2 14 7/8 X 47 3/8 9 1/16 X 47 3/8
3650 42 X 60 41 1/2 X 59 1/2 14 7/8 X 53 3/8 9 1/16 X 53 3/8
4020 48 X 24 47 1/2 X 23 1/2 17 7/8 X 17 3/8 12 1/16 X 17 3/8
4026 48 X 30 47 1/2 X 29 1/2 17 7/8 X 23 3/8 12 1/16 X 23 3/8
4030 48 X 36 47 1/2 X 35 1/2 17 7/8 X 29 3/8 12 1/16 X 29 3/8
4036 48 X 42 47 1/2 X 41 1/2 17 7/8 X 35 3/8 12 1/16 X 35 3/8
4040 48 X 48 47 1/2 X 47 1/2 17 7/8 X 41 3/8 12 1/16 X 41 3/8
4046 48 X 54 47 1/2 X 53 1/2 17 7/8 X 47 3/8 12 1/16 X 47 3/8
4050 48 X 60 47 1/2 X 59 1/2 17 7/8 X 53 3/8 12 1/16 X 53 3/8
4620 54 X 24 53 1/2 X 23 1/2 20 7/8 X 17 3/8 15 1/16 X 17 3/8
4626 54 X 30 53 1/2 X 29 1/2 20 7/8 X 23 3/8 15 1/16 X 23 3/8
4630 54 X 36 53 1/2 X 35 1/2 20 7/8 X 29 3/8 15 1/16 X 29 3/8
4636 54 X 42 53 1/2 X 41 1/2 20 7/8 X 35 3/8 15 1/16 X 35 3/8
4640 54 X 48 53 1/2 X 47 1/2 20 7/8 X 41 3/8 15 1/16 X 41 3/8
4646 54 X 54 53 1/2 X 53 1/2 20 7/8 X 47 3/8 15 1/16 X 47 3/8
4650 54 X 60 53 1/2 X 59 1/2 20 7/8 X 53 3/8 15 1/16 X 53 3/8
73