This document is a grade card for Sujit Kumar Giri, who studied Ceramic Engineering at the National Institute of Technology Rourkela from 2011-2016. It lists the courses taken each semester, along with credits earned and grades received. Over 10 semesters, Sujit earned a total of 269 credits and maintained a cumulative grade point average of 7.81 out of 10. His grades generally ranged from A to C, with a few D's and P's. He received excellent grades for his research project work in the 9th and 10th semesters.
This document is a grade card summarizing the academic performance of Sandeep Kumar Sahu in the Bachelor of Technology program in Civil Engineering at the National Institute of Technology Rourkela over eight semesters from 2012-2013 to graduation. It lists the courses taken each semester, credits earned, grades received, semester grade point averages, and cumulative grade point average. Overall his cumulative GPA was 8.24 on a 10 point scale.
This document is a transcript from Gujarat Technological University that summarizes the academic performance of Patoliya Bhaumil kumar Mukeshbhai. It lists the courses taken each semester, the grades received, semester performance index (SPI), and cumulative performance index (CPI). It certifies that Patoliya has earned a CGPA of 7.31 and has cleared their Bachelor of Engineering in Bio-Technology.
The document contains technical drawings and part lists for several mechanical assemblies including a knuckle joint, universal joint, shock absorber, chain and sprocket mechanism, differential gear box, and bench vice. The drawings include dimensions, materials, titles, and names and identification numbers of the designers. Accompanying text provides part numbers and quantities for the assemblies.
This document is a grade card for Aritra Roy, a student of civil engineering at Adamas Institute of Technology. It summarizes their academic performance over 8 semesters, listing the courses taken each semester along with the grades/points received. Overall, Aritra performed very well, maintaining a Yearly Grade Point Average (YGPA) above 7 each year and graduating with a final YGPA of 9.19.
Cameron Vos completed a Bachelor of Engineering (Civil Engineering) at the University, receiving the award in an unspecified year. Over the course of study from 2013-2016, Cameron completed various civil engineering and mathematics units of study, achieving marks ranging from 54 to 90. Overall averages increased each year, from 67.9 in first year to 79 in final year. The course history details the units completed each semester and the corresponding marks and grades received.
This document summarizes the academic record of a student from 2011 to 2014. It lists the courses taken each semester, including course codes, names, credits, grades and results. Over the period shown, the student earned a total of 180 credits with a weighted average of 7.4. The majority of credits were in mandatory courses, with no credits from optional or free choice courses.
Jermaine J Green attended ITI Technical College from February 2013 to February 2015 pursuing an Associate in Occupational Studies in Process Technology. Over this time period, he completed 100 credit hours and earned a cumulative GPA of 3.04. His transcript shows the courses taken each term, the grades received, and cumulative quality points. He was awarded his Associate in Occupational Studies on February 24, 2015.
This transcript summary provides the following information in 3 sentences:
The transcript is for Zachary Williams and lists their completed courses at NSU including course codes, names, grades and credits for each term from 2012 to 2016. A total of 125 credits are earned with a cumulative GPA of 3.182. The transcript details grades, credits and terms for courses in subjects such as chemistry, computer science, engineering technology, mathematics, physics and more.
This document is a grade card summarizing the academic performance of Sandeep Kumar Sahu in the Bachelor of Technology program in Civil Engineering at the National Institute of Technology Rourkela over eight semesters from 2012-2013 to graduation. It lists the courses taken each semester, credits earned, grades received, semester grade point averages, and cumulative grade point average. Overall his cumulative GPA was 8.24 on a 10 point scale.
This document is a transcript from Gujarat Technological University that summarizes the academic performance of Patoliya Bhaumil kumar Mukeshbhai. It lists the courses taken each semester, the grades received, semester performance index (SPI), and cumulative performance index (CPI). It certifies that Patoliya has earned a CGPA of 7.31 and has cleared their Bachelor of Engineering in Bio-Technology.
The document contains technical drawings and part lists for several mechanical assemblies including a knuckle joint, universal joint, shock absorber, chain and sprocket mechanism, differential gear box, and bench vice. The drawings include dimensions, materials, titles, and names and identification numbers of the designers. Accompanying text provides part numbers and quantities for the assemblies.
This document is a grade card for Aritra Roy, a student of civil engineering at Adamas Institute of Technology. It summarizes their academic performance over 8 semesters, listing the courses taken each semester along with the grades/points received. Overall, Aritra performed very well, maintaining a Yearly Grade Point Average (YGPA) above 7 each year and graduating with a final YGPA of 9.19.
Cameron Vos completed a Bachelor of Engineering (Civil Engineering) at the University, receiving the award in an unspecified year. Over the course of study from 2013-2016, Cameron completed various civil engineering and mathematics units of study, achieving marks ranging from 54 to 90. Overall averages increased each year, from 67.9 in first year to 79 in final year. The course history details the units completed each semester and the corresponding marks and grades received.
This document summarizes the academic record of a student from 2011 to 2014. It lists the courses taken each semester, including course codes, names, credits, grades and results. Over the period shown, the student earned a total of 180 credits with a weighted average of 7.4. The majority of credits were in mandatory courses, with no credits from optional or free choice courses.
Jermaine J Green attended ITI Technical College from February 2013 to February 2015 pursuing an Associate in Occupational Studies in Process Technology. Over this time period, he completed 100 credit hours and earned a cumulative GPA of 3.04. His transcript shows the courses taken each term, the grades received, and cumulative quality points. He was awarded his Associate in Occupational Studies on February 24, 2015.
This transcript summary provides the following information in 3 sentences:
The transcript is for Zachary Williams and lists their completed courses at NSU including course codes, names, grades and credits for each term from 2012 to 2016. A total of 125 credits are earned with a cumulative GPA of 3.182. The transcript details grades, credits and terms for courses in subjects such as chemistry, computer science, engineering technology, mathematics, physics and more.
This document contains the academic transcript of Saumya Sidhanta Choudhury who studied Bachelor of Technology in Mechanical Engineering from 2011-2015. It lists the subjects taken each semester, the credits earned and grades obtained. Overall, Saumya earned a CGPA of 6.72 out of 10 by the end of the 4 year degree program. The transcript shows the subjects and labs taken each semester, grades obtained and cumulative GPA.
1. The document describes a methodology used to analyze the attainment of course outcomes for an undergraduate engineering course.
2. An articulation matrix was created listing the hours and assessment scheme for each course outcome. Students' marks from tests, assignments, and exams were used to calculate the attainment score for each course outcome.
3. The average normalized attainment scores were calculated for each course outcome. Most outcomes were found to be "good" except for one which was "satisfactory", indicating an area for improvement.
This document is a grade sheet for a student named Bhabani Sankar Jena studying Mechanical Engineering at Gandhi Institute of Science and Technology, Rayagada. It lists the courses taken in the 7th and 8th semesters, along with their credits and grades. In the 7th semester, the student received grades ranging from A to C, and obtained an SGPA of 7.64. In the 8th semester, grades ranged from B to O, and the student's SGPA was 8.50. Their overall CGPA after the 8th semester was 7.53, and their promotional status was listed as Pass.
Wre 1 course file format SSIPMT RAIPUR ,CHATTISGARHParimal Jha
This document provides information about the Water Resource Engineering-I course for 7th semester civil engineering students. It includes the unit outcomes, course objectives, mapping of course outcomes to program outcomes, scheme of teaching and examination, course structure, book plan, marking scheme, lesson plan, unit-wise lesson plan, bridge course details, course utilization, assignment questions, tutorial plan, model paper, question bank, and NPTEL indexing. The course aims to help students understand basic concepts of irrigation, water requirements of crops, design of canals, water logging, river training, and reservoir planning. It will be taught over 4 lectures, 1 tutorial, and evaluated through exams, class tests, assignments, and tutorials totaling to 120 marks.
Thesis Report on Power Saving From Two -Wheeler Bike SilencerMd Anzar Aman
I have installed a mechanism with an axial high pressure reaction
turbines including a backward curved reaction turbine (Exhaust
Fan Blade) in a single shaft with an electrical generator which will
convert the kinematic energy into mechanical work and by
mechanical work we can generate electricity, when the pressure
energy of hot gases flows
Analysis of machining parameters using MQL conditionPadmalochan Nanda
In this project an investigation is done related to the role of MQL on tool wear and surface roughness in turning operation at industrial speed-feed combination
This document is a transcript for a student named Patel Raghavkumar Subhashohandra enrolled in the Mechanical Engineering course at G. H. Patel College of Engineering & Technology in V.V.Nagar. It lists all the subjects taken by the student semester-by-semester along with the credits, grade obtained, and weeks. It also provides information on the grading system, calculation of Semester Performance Index (SPI) and Cumulative Performance Index (CPI), regulations on backlogs and re-examinations, and criteria for awarding degrees.
The document is a marks sheet for a student named Aanchal from Government Polytechnic Bijnor, showing their results for the 5th and 6th semesters of the Civil Engineering (Lateral Entry) program. It lists the marks obtained by Aanchal out of the maximum marks for each subject in both semesters, with an overall score of 1523 out of 2209 resulting in First Division. It notes that qualifying exams for back subjects will be conducted in the next semester, and the results shown are not final and should be verified with the institute.
- Rajat studied Food Process Engineering at the National Institute of Technology Rourkela from 2013-2014.
- Over 8 semesters, Rajat completed courses in food processing, engineering, mathematics, chemistry and more.
- Rajat's cumulative grade point average was 7.40 out of 10 by the final 7th semester, indicating overall good performance.
This document is a bonafide certificate from St. Mother Theresa Engineering College for a student who completed their CS8582 Object Oriented Analysis and Design laboratory course. It includes the student's name, register number, year, branch, and semester. It certifies that the attached work was completed by the student during the 2020-2021 academic year. The attached work includes 15 experiments completed as part of the course, ranging from a passport automation system to a student information system.
This document contains a table with 30 entries providing details of online classes for various subjects including the date, subject code and name, google classroom code and link, and total student strength. Each entry lists the date of the exam, subject code and name, unique google classroom code, classroom link, and number of students enrolled for that class. The table includes subjects related to mechanical engineering, mathematics, physics, chemistry and other domains. The document appears to be listing online classes scheduled by the Department of Mechanical Engineering at Er.Perumal Manimekalai College of Engineering, Hosur for students from Coimbatore Anna University in arrears from 2001, 2007 and 2008.
CASE STUDY 1 GOKUL.pptx industrial areasSanjay606085
The document describes a project to reduce rejections of a drive belt pivot pin part. It identifies that the top rejection reasons were related to total length and undersize dimensions. Analysis found issues with only checking the setting part and visual inspection. The fixture was modified and a ring gauge added to ensure proper dimensions. This reduced pivoting pin rejections to zero, improved productivity and saved costs. The solution was deployed across additional machines.
This academic record summarizes Kundai Musuka's results for the Bachelor of Engineering (Civil and Construction Engineering) degree completed at the University. It shows the courses undertaken each semester from 2009 to 2014, the credits earned and grades received. In 2014, Kundai Musuka was conferred with the Bachelor of Engineering degree with Lower Second Class Honours. The record reflects the student's academic results as stored in the University's system.
IRJET- Quantative Analysis of Undercut in PCM for SS304IRJET Journal
This document presents an experimental study analyzing the effects of process parameters on undercut in photo chemical machining (PCM) of stainless steel 304. The study used Taguchi's orthogonal array design of experiments to evaluate the effects of etchant concentration, temperature, and time on the undercut response. Optimum values were identified as an etchant temperature of 50°C, concentration of 600 gm/liter, and etching time of 40 minutes. Analysis of variance (ANOVA) was used to analyze the results. An artificial neural network model was also developed to predict undercut values. The study aims to improve productivity and surface quality in PCM of stainless steel 304 by determining optimal process parameters that minimize undercut.
This document contains the results of B Tech 1st year students from Jawaharlal Nehru Technological University in Anantapur for the May 2012 regular and supplementary examinations. It lists the student names, subject codes, internal marks, external marks, total marks and results for various subjects like Engineering Chemistry, Mathematics, Physics, and Programming. The Controller of Examinations notes that any discrepancies must be reported within two weeks.
I year supple pending results-may 2012(2)Karthik Kumar
This document contains the results of various students from the Jawaharlal Nehru Technological University in the subjects of Engineering Chemistry, Mathematics, Physics, and Programming for their first year of the B Tech program in May 2012. It lists each student's name, subject, credits earned internally and externally, total marks, and final result. Any discrepancies in the results must be reported to the Controller of Examinations within two weeks.
The document is a result sheet for a student named Atul Kumar who studied Civil Engineering at Shri Ramswaroop Memorial College Of Engineering & Management. It provides details of his marks obtained in the 7th and 8th semesters, including individual paper names and codes, external and sessional marks, and credits. It also lists his aggregate marks and division obtained. In summary, it is a student result transcript detailing his semester-wise performance and overall marks achieved to obtain a B.Tech in Civil Engineering.
The document outlines a proposed curriculum for a B.Tech program in Civil Engineering at the National Institute of Technology Arunachal Pradesh.
It includes details of the semester-wise credit distribution, category-wise credit distribution across core subjects, electives, labs, internships and projects.
Course structures are provided for each semester, listing the subjects to be taught, course codes, titles, credits and outcomes. Elective subjects, open electives, internship details and the project dissertation are also described.
NACES Plant Design Report - SynTech Curtin SarawakLee Ren Jie
This document presents a plant design project report for the enhancement of syngas production using agri-waste technology. The proposed plant utilizes co-gasification of rice husk and sub-bituminous coal to produce approximately 50 kilo-tonnes per year of hydrogen-rich syngas. The design aims to provide a sustainable alternative to conventional processes through improved energy efficiency and reduced greenhouse gas emissions. Key aspects of the design include the co-gasification technology, heat recovery steam generation system, and desulphurization gas cleaning technology.
This document contains the academic transcript of Saumya Sidhanta Choudhury who studied Bachelor of Technology in Mechanical Engineering from 2011-2015. It lists the subjects taken each semester, the credits earned and grades obtained. Overall, Saumya earned a CGPA of 6.72 out of 10 by the end of the 4 year degree program. The transcript shows the subjects and labs taken each semester, grades obtained and cumulative GPA.
1. The document describes a methodology used to analyze the attainment of course outcomes for an undergraduate engineering course.
2. An articulation matrix was created listing the hours and assessment scheme for each course outcome. Students' marks from tests, assignments, and exams were used to calculate the attainment score for each course outcome.
3. The average normalized attainment scores were calculated for each course outcome. Most outcomes were found to be "good" except for one which was "satisfactory", indicating an area for improvement.
This document is a grade sheet for a student named Bhabani Sankar Jena studying Mechanical Engineering at Gandhi Institute of Science and Technology, Rayagada. It lists the courses taken in the 7th and 8th semesters, along with their credits and grades. In the 7th semester, the student received grades ranging from A to C, and obtained an SGPA of 7.64. In the 8th semester, grades ranged from B to O, and the student's SGPA was 8.50. Their overall CGPA after the 8th semester was 7.53, and their promotional status was listed as Pass.
Wre 1 course file format SSIPMT RAIPUR ,CHATTISGARHParimal Jha
This document provides information about the Water Resource Engineering-I course for 7th semester civil engineering students. It includes the unit outcomes, course objectives, mapping of course outcomes to program outcomes, scheme of teaching and examination, course structure, book plan, marking scheme, lesson plan, unit-wise lesson plan, bridge course details, course utilization, assignment questions, tutorial plan, model paper, question bank, and NPTEL indexing. The course aims to help students understand basic concepts of irrigation, water requirements of crops, design of canals, water logging, river training, and reservoir planning. It will be taught over 4 lectures, 1 tutorial, and evaluated through exams, class tests, assignments, and tutorials totaling to 120 marks.
Thesis Report on Power Saving From Two -Wheeler Bike SilencerMd Anzar Aman
I have installed a mechanism with an axial high pressure reaction
turbines including a backward curved reaction turbine (Exhaust
Fan Blade) in a single shaft with an electrical generator which will
convert the kinematic energy into mechanical work and by
mechanical work we can generate electricity, when the pressure
energy of hot gases flows
Analysis of machining parameters using MQL conditionPadmalochan Nanda
In this project an investigation is done related to the role of MQL on tool wear and surface roughness in turning operation at industrial speed-feed combination
This document is a transcript for a student named Patel Raghavkumar Subhashohandra enrolled in the Mechanical Engineering course at G. H. Patel College of Engineering & Technology in V.V.Nagar. It lists all the subjects taken by the student semester-by-semester along with the credits, grade obtained, and weeks. It also provides information on the grading system, calculation of Semester Performance Index (SPI) and Cumulative Performance Index (CPI), regulations on backlogs and re-examinations, and criteria for awarding degrees.
The document is a marks sheet for a student named Aanchal from Government Polytechnic Bijnor, showing their results for the 5th and 6th semesters of the Civil Engineering (Lateral Entry) program. It lists the marks obtained by Aanchal out of the maximum marks for each subject in both semesters, with an overall score of 1523 out of 2209 resulting in First Division. It notes that qualifying exams for back subjects will be conducted in the next semester, and the results shown are not final and should be verified with the institute.
- Rajat studied Food Process Engineering at the National Institute of Technology Rourkela from 2013-2014.
- Over 8 semesters, Rajat completed courses in food processing, engineering, mathematics, chemistry and more.
- Rajat's cumulative grade point average was 7.40 out of 10 by the final 7th semester, indicating overall good performance.
This document is a bonafide certificate from St. Mother Theresa Engineering College for a student who completed their CS8582 Object Oriented Analysis and Design laboratory course. It includes the student's name, register number, year, branch, and semester. It certifies that the attached work was completed by the student during the 2020-2021 academic year. The attached work includes 15 experiments completed as part of the course, ranging from a passport automation system to a student information system.
This document contains a table with 30 entries providing details of online classes for various subjects including the date, subject code and name, google classroom code and link, and total student strength. Each entry lists the date of the exam, subject code and name, unique google classroom code, classroom link, and number of students enrolled for that class. The table includes subjects related to mechanical engineering, mathematics, physics, chemistry and other domains. The document appears to be listing online classes scheduled by the Department of Mechanical Engineering at Er.Perumal Manimekalai College of Engineering, Hosur for students from Coimbatore Anna University in arrears from 2001, 2007 and 2008.
CASE STUDY 1 GOKUL.pptx industrial areasSanjay606085
The document describes a project to reduce rejections of a drive belt pivot pin part. It identifies that the top rejection reasons were related to total length and undersize dimensions. Analysis found issues with only checking the setting part and visual inspection. The fixture was modified and a ring gauge added to ensure proper dimensions. This reduced pivoting pin rejections to zero, improved productivity and saved costs. The solution was deployed across additional machines.
This academic record summarizes Kundai Musuka's results for the Bachelor of Engineering (Civil and Construction Engineering) degree completed at the University. It shows the courses undertaken each semester from 2009 to 2014, the credits earned and grades received. In 2014, Kundai Musuka was conferred with the Bachelor of Engineering degree with Lower Second Class Honours. The record reflects the student's academic results as stored in the University's system.
IRJET- Quantative Analysis of Undercut in PCM for SS304IRJET Journal
This document presents an experimental study analyzing the effects of process parameters on undercut in photo chemical machining (PCM) of stainless steel 304. The study used Taguchi's orthogonal array design of experiments to evaluate the effects of etchant concentration, temperature, and time on the undercut response. Optimum values were identified as an etchant temperature of 50°C, concentration of 600 gm/liter, and etching time of 40 minutes. Analysis of variance (ANOVA) was used to analyze the results. An artificial neural network model was also developed to predict undercut values. The study aims to improve productivity and surface quality in PCM of stainless steel 304 by determining optimal process parameters that minimize undercut.
This document contains the results of B Tech 1st year students from Jawaharlal Nehru Technological University in Anantapur for the May 2012 regular and supplementary examinations. It lists the student names, subject codes, internal marks, external marks, total marks and results for various subjects like Engineering Chemistry, Mathematics, Physics, and Programming. The Controller of Examinations notes that any discrepancies must be reported within two weeks.
I year supple pending results-may 2012(2)Karthik Kumar
This document contains the results of various students from the Jawaharlal Nehru Technological University in the subjects of Engineering Chemistry, Mathematics, Physics, and Programming for their first year of the B Tech program in May 2012. It lists each student's name, subject, credits earned internally and externally, total marks, and final result. Any discrepancies in the results must be reported to the Controller of Examinations within two weeks.
The document is a result sheet for a student named Atul Kumar who studied Civil Engineering at Shri Ramswaroop Memorial College Of Engineering & Management. It provides details of his marks obtained in the 7th and 8th semesters, including individual paper names and codes, external and sessional marks, and credits. It also lists his aggregate marks and division obtained. In summary, it is a student result transcript detailing his semester-wise performance and overall marks achieved to obtain a B.Tech in Civil Engineering.
The document outlines a proposed curriculum for a B.Tech program in Civil Engineering at the National Institute of Technology Arunachal Pradesh.
It includes details of the semester-wise credit distribution, category-wise credit distribution across core subjects, electives, labs, internships and projects.
Course structures are provided for each semester, listing the subjects to be taught, course codes, titles, credits and outcomes. Elective subjects, open electives, internship details and the project dissertation are also described.
NACES Plant Design Report - SynTech Curtin SarawakLee Ren Jie
This document presents a plant design project report for the enhancement of syngas production using agri-waste technology. The proposed plant utilizes co-gasification of rice husk and sub-bituminous coal to produce approximately 50 kilo-tonnes per year of hydrogen-rich syngas. The design aims to provide a sustainable alternative to conventional processes through improved energy efficiency and reduced greenhouse gas emissions. Key aspects of the design include the co-gasification technology, heat recovery steam generation system, and desulphurization gas cleaning technology.
1. 6/22/2016 eapplication.nitrkl.ac.in/StudentInfo/WebPage/Examination/Internal/Grade_Card_UG.aspx?JDUAcyeAR=ODc5JIpa5BolqRQ%3d
http://eapplication.nitrkl.ac.in/StudentInfo/WebPage/Examination/Internal/Grade_Card_UG.aspx?JDUAcyeAR=ODc5JIpa5BolqRQ%3d 1/2
NATIONAL INSTITUTE OF TECHNOLOGY ROURKELA
GRADE CARD FOR INFORMATION OF STUDENT ONLY
MASTER OF TECHNOLOGY
Name : SUJIT KUMAR GIRI Branch : CERAMIC ENGINEERING
Roll No. : 711CR1171 Joined : AY 201112 Graduated : AY
1st Semester
Subject
Code
Subject Name LTP Credits Grade
CE100 Engineering Mechanics 310 4 P
CY101 Chemistry 310 4 C
EE100 Basic Electrical Engineering 310 4 B
MA101 Mathematics I 310 4 D
PH101 Physics I 310 4 P
CE171 Engineering Drawing 003 2 B
CS171 Computing Laboratory I 003 2 C
PH170 Physics Laboratory 003 2 A
WS171 Workshop Practice I 003 2 Ex
EA171 NCCI 003 2 Ex
Semester
Credits :
30
Semester Grade Point Average
(SGPA) :
7.07
Total Credits : 30
Cummulative Grade Point Average
(CGPA) :
7.07
2nd Semester
Subject
Code
Subject Name LTP Credits Grade
CE130 Environment and Safety Engineering 310 4 B
CS102 Data Structures and Algorithms 310 4 P
EC100 Basic Electronics Engineering 310 4 D
MA102 Mathematics – II 310 4 D
PH102 Physics – II 310 4 D
CS172 Computing Laboratory II 003 2 D
CY170 Chemistry Laboratory 003 2 Ex
ME170 Machine Drawing and Solid Modeling 003 2 A
WS172 Workshop Practice II 003 2 Ex
EA172 NCCII 003 2 B
Semester
Credits :
30 Semester Grade Point Average (SGPA) : 7.00
Total Credits : 60
Cummulative Grade Point Average
(CGPA) :
7.03
3rd Semester
Subject
Code
Subject Name LTP Credits Grade
CR211
Unit Operations in Ceramic
Processing
310 4 B
CR231
Properties of Ceramic Raw
Materials
310 4 A
MA201 Mathematics III 310 4 D
CH229 Basic Chemical Engineering 300 3 P
CR223 Materials Thermodynamics 300 3 D
CR271 Raw Materials Analysis Laboratory 003 2 Ex
CR273 Ceramic Workshop 003 2 Ex
EC270 Basic Electronics Laboratory 003 2 A
MA270 Numerical Methods Laboratory 003 2 A
Semester
Credits :
26
Semester Grade Point Average
(SGPA) :
7.73
Total Credits : 86
Cummulative Grade Point Average
(CGPA) :
7.24
4th Semester
Subject
Code
Subject Name LTP Credits Grade
CR212 Ceramic Processing 310 4 P
CR230 Science of Ceramic Materials 310 4 C
MA202 Mathematics – IV 310 4 B
BM429 Materials in Medical Science 300 3 A
CR244 Introduction to Engineering Materials 300 3 D
CR272 Drawing of Refractory Lining and Joints 003 2 B
CR274 Ceramic Fabrication Laboratory 003 2 A
EE270 Electrical Engineering Laboratory 003 2 B
HS270 Language Laboratory 003 2 A
Semester
Credits :
26 Semester Grade Point Average (SGPA) : 7.42
Total Credits : 112
Cummulative Grade Point Average
(CGPA) :
7.29
5th Semester
Subject
Code
Subject Name LTP Credits Grade
CR335 Instrumental Characterization 310 4 C
CR341 Physical Ceramics 310 4 P
CR327
Interface Science and Sol Gel
Processing
300 3 D
CR331 Whiteware Technology 300 3 B
HS420 Human Resource Management. 300 3 D
CR371
High Temperature Processing
Laboratory
003 2 A
CR373 Whiteware Technology Laboratory 003 2 C
CR375
Ceramic Characterization
Laboratory
003 2 A
CR377
Ceramic Equipment Design
Laboratory
003 2 B
Semester
Credits :
25
Semester Grade Point Average
(SGPA) :
6.96
Cummulative Grade Point Average
6th Semester
Subject
Code
Subject Name LTP Credits Grade
CR320 Science of Sintering 310 4 C
CR336 Cement Technology 310 4 A
CR310 Refractories Technology 300 3 A
CR322 Glass Technology 300 3 C
LS538 Man and Microbes 300 3 Ex
CR370 Refractories Technology Laboratory 003 2 B
CR372 Glass Technology Laboratory 003 2 B
CR374
Ceramic Product Development
Laboratory
003 2 B
CR376 Cement Technology Laboratory 003 2 A
Semester
Credits :
25 Semester Grade Point Average (SGPA) : 8.32
Total Credits : 162
Cummulative Grade Point Average
(CGPA) :
7.40
2. 6/22/2016 eapplication.nitrkl.ac.in/StudentInfo/WebPage/Examination/Internal/Grade_Card_UG.aspx?JDUAcyeAR=ODc5JIpa5BolqRQ%3d
http://eapplication.nitrkl.ac.in/StudentInfo/WebPage/Examination/Internal/Grade_Card_UG.aspx?JDUAcyeAR=ODc5JIpa5BolqRQ%3d 2/2
Total Credits : 137 (CGPA) : 7.23
...........................................................................................................................................................................................................................................
National Institute of Technology, Rourkela769008 (Orissa), Phone: 06612462031, Fax: 06612462033 Website : www.nitrkl.ac.in
Name : SUJIT KUMAR GIRI Branch : CERAMIC ENGINEERING
Roll No. : 711CR1171 Joined : AY 201112 Graduated : AY
7th Semester
Subject
Code
Subject Name LTP Credits Grade
CR421
Application of Glass and Glass
ceramics
300 3 A
CR431 Composite Materials 300 3 D
CR601 Industrial Ceramic Processing 300 3 C
CR603 Whiteware Production and Practices 300 3 A
CR615 Electron Microscopy 300 3 C
CR368
Product Development Laboratory –
II
003 2 A
CR370 Mechanical Testing Laboratory 003 2 EX
CR673
Industrial Ceramic Processing
Laboratory
003 2 A
CR675
Computational Data Analysis
Laboratory
003 2 A
CR493 Seminar and Technical Writing – I 000 2 B
CR495
Short Term Industrial/Research
Experience
003 2 B
Semester
Credits :
27
Semester Grade Point Average
(SGPA) :
8.15
Total Credits : 189
Cummulative Grade Point Average
(CGPA) :
7.50
8th Semester
Subject
Code
Subject Name LTP Credits Grade
CR412 Application of Phase Diagrams 310 4 D
CR454 Nanoceramics 300 3 B
CR602 Advanced Refractories 300 3 A
CR604 Glass Science 300 3 C
CR636 Advanced Composites 300 3 B
CR472 Electroceramics Laboratory 003 2 A
CR474 Ceramic Powder Synthesis Project 003 2 B
CR478
Data Analysis and Modeling using
MATLAB and Simulink
003 2 B
CR494 Seminar and Technical Writing – II 000 2 B
CR466 Research Practice 000 2 C
Semester
Credits :
26 Semester Grade Point Average (SGPA) : 7.69
Total Credits : 215
Cummulative Grade Point Average
(CGPA) :
7.53
9th Semester
Subject
Code
Subject Name LTP Credits Grade
CR631 Mechanical Behaviour of Ceramics 300 3 C
CR641 Ceramics in Energy Sectors 300 3 C
CR687 Seminar and Technical Writing – III 000 2 C
CR591
Research Project Work – I
(Summer)
000 10 A
CR593 Research Project Work – II 000 10 A
Semester
Credits :
28
Semester Grade Point Average
(SGPA) :
8.43
Total Credits : 243
Cummulative Grade Point Average
(CGPA) :
7.63
10th Semester
Subject
Code
Subject Name LTP Credits Grade
CR688 Seminar and Technical Writing – IV 000 2 B
CR594 Research Project – III 000 20 EX
CR692 Comprehensive Viva Voce 000 4 B
Semester
Credits :
26 Semester Grade Point Average (SGPA) : 9.54
Total Credits : 269
Cummulative Grade Point Average
(CGPA) :
7.81
REMARKS : Performance Grade
Grade
Point
Performance Grade
Grade
Point
Performance Grade
Grade
Point
Excellent Ex 10 Fair C 7 Fail F 2
Very Good A 9 Average D 6
Incomplete
Assesment
I
Good B 8 Pass P 5 Debarred X
Date : 22 Jun 2016