1. ASSIGNMENT NO. 4 SEM: - 5TH SUBJECT:-M & I (3341905)
Prepared By VHH Page 1 of 1
ASSIGNMENT NO. 4 (M & I) (3341905)
CH.-4 Gear Measurement
* 2, 3, 4 & 5 MARKS QUESTIONS *
1
Give only two names of the methods to measure Gear Tooth Thickness.
(ગિયર ટૂથ થીક્નેસ માપવા માટેના ફક્ત બે પદ્ધતતના નામ આપો.) (Summer-2015,2017)
2
Name the two methods for measure Gear tooth Profile.
(ગિયર ટૂથ પ્રોફાઈલ માપવા માટેના ફક્ત બે પદ્ધતતના નામ આપો.) (Winter-2016)
3 List the elements of Internal Gear. (ઇન્ટરનલ ગિયરના એગલમેન્ટ લખો.) (Winter-2016)
4
List the types of Gear and Define Modules.
(ગિયરના પ્રકાર લખો અને મોડ્યુલની વ્યાખ્યા આપો.) (Winter-2016, Summer-2015)
5
Explain Parkinson’s Gear Tester with neat sketch.
(સ્વચ્છ આકૃતતની મદદથી પાકીન્સન્સ ગિયર ટેસ્ટર વર્ણવો.) (Winter-2015,2017,2017, Summer-2017)
6
Explain Method of Checking Eccentricity of Spur Gear with axis of Rotation.
(સ્પર ગિયરના દાાંતાની એસેન્રીસીટી ચકાસવાની રીત જર્ાવો.) (Winter-2017)
7
Give a short mote on Gear Tooth Vernier.
(ગિયર ટૂથ વનીયર કેગલપર તવષે ટૂાંકનોંધ લખો.) (Summer-2014, Winter-2015,2016,2018)
8
Define the following. (વ્યાખ્યા આપો.)
1) Addendum (એડ્ેન્ડ્મ)
2) Dedendum (ડ્ીડ્ેન્ડ્મ)
3) Circular Pitch (સર્ક્ુણલર પીચ)
4) Tooth Thickness (દાાંતાની જાડ્ાઈ)
5) Dimetral Pitch (ડ્ાયામેરલ પીચ)
6) Module (મોડ્યુલ)
7) Pitch circle diameter (પીચ સકણલ ડ્ાયામીટર)
Notes :
1) This assignment is for 4th Semester Students for the
Subject Name : METROLOGY & INSTRUMENTATION
Subject Code : 3341905
2) In Diploma Engineering In Mechanical Branch.
3) In Gujarat Technological University.
4) This Assignment prepared by Mr. Vipul Hingu.
Mr. Vipul Hingu
Lecturer
Mechanical Engineering Department
S.B. Polytechnic, Savli
K.J. Campus, Savli, Dist-Vadodara