30 1000 owners manual
•
0 likes•102 views
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms for those who already suffer from conditions like anxiety and depression.
Report
Share
Report
Share
Download to read offline
Recommended
53254 0320 mach202_20_gl8_gl8000_rca-30k
This document provides information about a GL8000 hot tub control system model GL8-GL8000-RCA-3.0K including:
1) The base PCBA and panel part numbers for the ML700 and ML900 control panels.
2) Instructions for converting the circuit board configuration from single electrical service to dual or 3-phase service.
3) A description of the DIP switch settings for configuring functions like heating options, temperature display, equipment timeouts and more.
55423 01 gs5_gs520_sz_rca-30
This document provides technical specifications for the Balboa Instruments GS520SZ spa control system. It includes the system model number, software version, and component part numbers. Wiring diagrams and DIP switch settings are provided for two different spa equipment setup configurations.
85 0066-b rev 2 hq ultimate series installation
The document provides contact information for HydroQuip's Technical Support staff, including their address, website, email, and phone and fax numbers. It encourages readers to contact Technical Support if they encounter any problems or need assistance. It also notes that "THE SMART CHOICE" is HydroQuip's slogan.
85 0100 b-p-rev 1_air installation_web
This document provides installation instructions for an air series control system for spas. It includes considerations for installation such as ensuring adequate drainage and ventilation in the equipment area. It provides illustrations of control system components and connections. It also provides instructions for electrical installation, connecting system components, starting up the system, and troubleshooting.
55106 gs5 gs510_dz_rca_30
This document provides technical specifications for the Balboa Instruments GS510DZ spa control system. It lists the model number, software version, and component part numbers. The system requires a PCB revision B and has outputs that can control pumps, lights, auxiliaries, and optional devices. It also describes basic features like power requirements and the power up display sequence.
85 0100 b-1-rev 3_generic air installation
The document provides instructions for connecting a portable spa to electrical power. It describes 3 options for electrical connections: 1) Using a 15-amp GFCI-protected cord, which requires a dedicated 15-amp circuit. 2) Installing a GFCI breaker in the main service panel. 3) For systems that have an integrated GFCI on the control box, no additional GFCI protection is needed. Proper electrical connection is important for safety and to avoid voiding the warranty.
55068 04 e1_p_el1000m3_dcah
This document provides technical specifications for the EL1000 Mach 3 control system. It includes the model number, software version, base PCBA number, and PCB number. It also lists the base panels that can be used and provides a revision history, basic system features, wiring configuration details, DIP switch settings, and definitions for switches and jumpers.
55403 01 gs5_gs514_sz_rca-30
This document provides technical specifications for the Balboa Instruments GS5-GS514SZ-RCA-3.0 pool/spa control system. It includes information on the system model number, software version, and electrical components. The document also details the system's basic features and functions, wiring configuration, dip switch settings, and electrical service options.
Recommended
53254 0320 mach202_20_gl8_gl8000_rca-30k
This document provides information about a GL8000 hot tub control system model GL8-GL8000-RCA-3.0K including:
1) The base PCBA and panel part numbers for the ML700 and ML900 control panels.
2) Instructions for converting the circuit board configuration from single electrical service to dual or 3-phase service.
3) A description of the DIP switch settings for configuring functions like heating options, temperature display, equipment timeouts and more.
55423 01 gs5_gs520_sz_rca-30
This document provides technical specifications for the Balboa Instruments GS520SZ spa control system. It includes the system model number, software version, and component part numbers. Wiring diagrams and DIP switch settings are provided for two different spa equipment setup configurations.
85 0066-b rev 2 hq ultimate series installation
The document provides contact information for HydroQuip's Technical Support staff, including their address, website, email, and phone and fax numbers. It encourages readers to contact Technical Support if they encounter any problems or need assistance. It also notes that "THE SMART CHOICE" is HydroQuip's slogan.
85 0100 b-p-rev 1_air installation_web
This document provides installation instructions for an air series control system for spas. It includes considerations for installation such as ensuring adequate drainage and ventilation in the equipment area. It provides illustrations of control system components and connections. It also provides instructions for electrical installation, connecting system components, starting up the system, and troubleshooting.
55106 gs5 gs510_dz_rca_30
This document provides technical specifications for the Balboa Instruments GS510DZ spa control system. It lists the model number, software version, and component part numbers. The system requires a PCB revision B and has outputs that can control pumps, lights, auxiliaries, and optional devices. It also describes basic features like power requirements and the power up display sequence.
85 0100 b-1-rev 3_generic air installation
The document provides instructions for connecting a portable spa to electrical power. It describes 3 options for electrical connections: 1) Using a 15-amp GFCI-protected cord, which requires a dedicated 15-amp circuit. 2) Installing a GFCI breaker in the main service panel. 3) For systems that have an integrated GFCI on the control box, no additional GFCI protection is needed. Proper electrical connection is important for safety and to avoid voiding the warranty.
55068 04 e1_p_el1000m3_dcah
This document provides technical specifications for the EL1000 Mach 3 control system. It includes the model number, software version, base PCBA number, and PCB number. It also lists the base panels that can be used and provides a revision history, basic system features, wiring configuration details, DIP switch settings, and definitions for switches and jumpers.
55403 01 gs5_gs514_sz_rca-30
This document provides technical specifications for the Balboa Instruments GS5-GS514SZ-RCA-3.0 pool/spa control system. It includes information on the system model number, software version, and electrical components. The document also details the system's basic features and functions, wiring configuration, dip switch settings, and electrical service options.
85 0064-e standard-installation insert_web
The document provides instructions for configuring the electrical service and programming options for a 9300 series control system. It can be configured for either 120V or 240V service by positioning a jumper. The control board contains jumpers that allow changing parameters like temperature display format, pump speed settings, and current limiting. Basic operation instructions are also provided, covering control of pumps, lights, temperatures, and programming filter cycles. Error messages and their meanings are defined.
55508 vsp vs501_sz_azaj
This document provides a technical sheet for the VS501SZ spa system. It includes information about the system model number, software version, and component part numbers. It also details the basic system features, wiring configuration, dip switch settings, and ozone connections for the spa system.
43 1000 series owners manual
The document discusses the benefits of meditation for reducing stress and anxiety. Regular meditation practice can help calm the mind and body by lowering heart rate and blood pressure. Studies have shown that meditating for just 10-20 minutes per day can have significant positive impacts on both mental and physical health over time.
85 0067-b5 8600 series installation rev.1
If you encounter any problems or need assistance, contact HydroQuip's Technical Support staff at (909) 273-7575. HydroQuip is located at 13345 Estelle Street, Corona, CA 92879. Their website is www.hydroquip.com and email is hq@hydroquip.com.
55474 01 gs5_gs515_z_rca-30k
This document provides technical specifications for the GS515Z pool and spa control system. It includes:
- The model and software version numbers
- A list of system components and optional add-ons
- Descriptions of basic system features like power requirements, outputs, and additional options
- Information on wiring configuration, DIP switch settings, and jumper definitions
- A diagram showing the panel button positions and assignments
85 0066-c rev 1 hq ultimate troubleshooting manual
This document provides troubleshooting information for HT-2 and 9600 series spa controls. It describes potential error messages, including 3 flashing dots, pressure or flow switch issues, temperature sensor errors, and over temperature conditions. It also outlines how to enter low-level programming to customize system parameters.
55066 04 e2_p_el2001m3_ycah
This document provides technical specifications for the EL2001 Mach 3 controller, including:
- The model, software version, and part numbers for the system and its components.
- Information on compatible base panels and a system revision history.
- Overviews of the system's features, power requirements, outputs, and optional devices.
- Details on persistent memory, the power-up display sequence, wiring configuration and DIP switch settings.
- Definitions of the DIP switches and jumpers used to configure the system.
85 0100 a-1-rev 1_univ air_operation_generic
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
55471 gs5 gs501_z_rca_30
This document provides specifications and configuration details for the Balboa Instruments GS501Z pool and spa control system. Key components include the GS500Z main printed circuit board and optional display panels. The system supports various heater sizes and voltages, and can be configured for different pump, circulation, and electrical wiring setups using dip switches and jumpers. Revisions to the main circuit board and a history of software updates are also documented.
Balboa directcatalog
This document outlines the terms and conditions for purchases from Balboa Instruments, Inc. Key points include:
- Products are sold on a pre-paid basis with payment required before shipment.
- Cancellations can be made within 3 days of order or if the product has not been built.
- Balboa provides warranties for systems and components ranging from 1-2 years.
- Customers are responsible for return shipping costs for warranty repairs, while Balboa covers outbound shipping.
- Balboa may modify these terms at any time without notice.
Manual epack
The document provides instructions for operating a SmarTouch Digital spa control system. It contains 3 pages of information:
1) An introduction explaining that the control system is easy to use and only requires setting the temperature and pressing SET when finished.
2) Instructions for setting the temperature and using the SET key to start filtration cycles.
3) An explanation of the control panel keys and their functions for controlling devices like pumps, blowers, lights, and setting filtration time.
Ultimate spaside instruction sheet
This document provides instructions for adjusting various settings on a spa control panel, including temperature unit (F or C), time of day, economy mode start time and duration, panel lock, and descriptions of default settings and modes like economy mode and freeze protection. Settings are adjusted using the program, list, enter and up/down arrow keys, and confirmed with enter. Error codes are displayed as flashing dots and require servicing.
Standard spaside instruction sheet
The document provides instructions for operating various functions of a spa or hot tub. It describes the economy mode which maintains water temperature 20°F below the set point. It also describes the freeze protection mode which activates the pump and heater if water drops below certain temperatures. Default settings are described such as filtration cycles running for 1 hour every 24 hours with water at 95°F. Instructions are provided for operating pumps, blowers, lights and setting the temperature. Error codes and troubleshooting tips are also summarized.
Ps 9704 manual-rev1_2
This document provides installation and operation instructions for a PS-9704 series pool/spa control system. It includes guidelines for installing remote heaters, making electrical and wet connections, programming filtration settings, and troubleshooting. Safety precautions are outlined, and a wiring diagram and parts list are provided.
Ps 7100 manual-rev1_2
The document provides installation and operation instructions for a Platinum Series pool and spa control system. It includes details on installing remote heaters, electrical connections, temperature sensors, equipment connections, and programming filtration settings. Safety instructions are provided at the beginning regarding proper installation and use of the system.
Ps 6500 manual-rev1_2
The document provides installation instructions for PS-6502 & PS-6503 Platinum Series pool and spa control systems. It describes how to install the heater in different locations including on the bottom, back, or top of the control box using adjustable clamps or slide brackets. The instructions also cover electrical installation, temperature sensor placement, equipment connections, and programming filtration settings. Additional sections provide details on optional equipment, operational considerations, troubleshooting, and warranty information.
Hq label wd highlight
This website sells wholesale pool and spa parts. It is located at http://www.MyPoolSpas.com. The phone number for My Pool and Spas is 920-925-3094.
Eco 3 spaside instruction sheet
The document provides information on the default system operation, freeze protection modes, high temperature error handling, filtration cycles, pump and blower controls, light controls, temperature setting, and error identification for a spa or pool system. When power is applied, the system will initiate a default 24-hour filtration cycle at 95°F. It describes two modes of freeze protection below 59°F and 49°F and will suspend filtration if temperatures exceed 115°F or reach errors.
Eco 2 spaside instruction sheet
The document provides instructions for operating and programming a spa, including:
- If the water temperature exceeds 115°F, the heater will turn off, and above 122°F all outputs will disable until cooled.
- The filtration cycle can be programmed to run 1, 2, or 3 times daily for 60, 120, 180, or 480 minutes each cycle.
- By default, the spa will filter for 1 hour every 24 hours, maintaining the temperature at 95°F.
- Instructions are provided for operating the pump, accessory, light, and adjusting the temperature settings.
- The system enters a freeze protection mode if the temperature drops below 59°F by turning the pump on periodically.
Eco 1 spaside instruction sheet
The document provides instructions for operating and programming a spa control system. It describes how the system handles high temperatures, allows setting filter cycles for 1-3 times daily and durations of 60-180 minutes, and will default to a 24-hour filter cycle at 95°F if power is lost. It also explains how to operate the pump, light, and change the temperature setting, and describes freeze protection and error identification features.
Eco 2 pcb revisions
This document summarizes the revision history of PCB part number 33-0024-Rx from the initial R0 revision in January 1999 through the current R6 revision. It describes the changes made at each revision level such as PCB layout changes, software changes, additions of memory and removal of features. It also provides information to help identify the correct wiring diagram for a given revision level.
Eco 1 programming
This document provides instructions for an Eco 1 timed filtration system. It states to press and hold the light button to change the duration of filtration, and to press and hold the pump button to change the number of times filtration will occur. It also provides contact information for My Pool and Spas, a wholesale pool and spa parts supplier.
More Related Content
Viewers also liked
85 0064-e standard-installation insert_web
The document provides instructions for configuring the electrical service and programming options for a 9300 series control system. It can be configured for either 120V or 240V service by positioning a jumper. The control board contains jumpers that allow changing parameters like temperature display format, pump speed settings, and current limiting. Basic operation instructions are also provided, covering control of pumps, lights, temperatures, and programming filter cycles. Error messages and their meanings are defined.
55508 vsp vs501_sz_azaj
This document provides a technical sheet for the VS501SZ spa system. It includes information about the system model number, software version, and component part numbers. It also details the basic system features, wiring configuration, dip switch settings, and ozone connections for the spa system.
43 1000 series owners manual
The document discusses the benefits of meditation for reducing stress and anxiety. Regular meditation practice can help calm the mind and body by lowering heart rate and blood pressure. Studies have shown that meditating for just 10-20 minutes per day can have significant positive impacts on both mental and physical health over time.
85 0067-b5 8600 series installation rev.1
If you encounter any problems or need assistance, contact HydroQuip's Technical Support staff at (909) 273-7575. HydroQuip is located at 13345 Estelle Street, Corona, CA 92879. Their website is www.hydroquip.com and email is hq@hydroquip.com.
55474 01 gs5_gs515_z_rca-30k
This document provides technical specifications for the GS515Z pool and spa control system. It includes:
- The model and software version numbers
- A list of system components and optional add-ons
- Descriptions of basic system features like power requirements, outputs, and additional options
- Information on wiring configuration, DIP switch settings, and jumper definitions
- A diagram showing the panel button positions and assignments
85 0066-c rev 1 hq ultimate troubleshooting manual
This document provides troubleshooting information for HT-2 and 9600 series spa controls. It describes potential error messages, including 3 flashing dots, pressure or flow switch issues, temperature sensor errors, and over temperature conditions. It also outlines how to enter low-level programming to customize system parameters.
55066 04 e2_p_el2001m3_ycah
This document provides technical specifications for the EL2001 Mach 3 controller, including:
- The model, software version, and part numbers for the system and its components.
- Information on compatible base panels and a system revision history.
- Overviews of the system's features, power requirements, outputs, and optional devices.
- Details on persistent memory, the power-up display sequence, wiring configuration and DIP switch settings.
- Definitions of the DIP switches and jumpers used to configure the system.
85 0100 a-1-rev 1_univ air_operation_generic
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
55471 gs5 gs501_z_rca_30
This document provides specifications and configuration details for the Balboa Instruments GS501Z pool and spa control system. Key components include the GS500Z main printed circuit board and optional display panels. The system supports various heater sizes and voltages, and can be configured for different pump, circulation, and electrical wiring setups using dip switches and jumpers. Revisions to the main circuit board and a history of software updates are also documented.
Balboa directcatalog
This document outlines the terms and conditions for purchases from Balboa Instruments, Inc. Key points include:
- Products are sold on a pre-paid basis with payment required before shipment.
- Cancellations can be made within 3 days of order or if the product has not been built.
- Balboa provides warranties for systems and components ranging from 1-2 years.
- Customers are responsible for return shipping costs for warranty repairs, while Balboa covers outbound shipping.
- Balboa may modify these terms at any time without notice.
Manual epack
The document provides instructions for operating a SmarTouch Digital spa control system. It contains 3 pages of information:
1) An introduction explaining that the control system is easy to use and only requires setting the temperature and pressing SET when finished.
2) Instructions for setting the temperature and using the SET key to start filtration cycles.
3) An explanation of the control panel keys and their functions for controlling devices like pumps, blowers, lights, and setting filtration time.
Viewers also liked (11)
85 0066-c rev 1 hq ultimate troubleshooting manual
85 0066-c rev 1 hq ultimate troubleshooting manual
More from Accurate Pool & Spa Services, llc
Ultimate spaside instruction sheet
This document provides instructions for adjusting various settings on a spa control panel, including temperature unit (F or C), time of day, economy mode start time and duration, panel lock, and descriptions of default settings and modes like economy mode and freeze protection. Settings are adjusted using the program, list, enter and up/down arrow keys, and confirmed with enter. Error codes are displayed as flashing dots and require servicing.
Standard spaside instruction sheet
The document provides instructions for operating various functions of a spa or hot tub. It describes the economy mode which maintains water temperature 20°F below the set point. It also describes the freeze protection mode which activates the pump and heater if water drops below certain temperatures. Default settings are described such as filtration cycles running for 1 hour every 24 hours with water at 95°F. Instructions are provided for operating pumps, blowers, lights and setting the temperature. Error codes and troubleshooting tips are also summarized.
Ps 9704 manual-rev1_2
This document provides installation and operation instructions for a PS-9704 series pool/spa control system. It includes guidelines for installing remote heaters, making electrical and wet connections, programming filtration settings, and troubleshooting. Safety precautions are outlined, and a wiring diagram and parts list are provided.
Ps 7100 manual-rev1_2
The document provides installation and operation instructions for a Platinum Series pool and spa control system. It includes details on installing remote heaters, electrical connections, temperature sensors, equipment connections, and programming filtration settings. Safety instructions are provided at the beginning regarding proper installation and use of the system.
Ps 6500 manual-rev1_2
The document provides installation instructions for PS-6502 & PS-6503 Platinum Series pool and spa control systems. It describes how to install the heater in different locations including on the bottom, back, or top of the control box using adjustable clamps or slide brackets. The instructions also cover electrical installation, temperature sensor placement, equipment connections, and programming filtration settings. Additional sections provide details on optional equipment, operational considerations, troubleshooting, and warranty information.
Hq label wd highlight
This website sells wholesale pool and spa parts. It is located at http://www.MyPoolSpas.com. The phone number for My Pool and Spas is 920-925-3094.
Eco 3 spaside instruction sheet
The document provides information on the default system operation, freeze protection modes, high temperature error handling, filtration cycles, pump and blower controls, light controls, temperature setting, and error identification for a spa or pool system. When power is applied, the system will initiate a default 24-hour filtration cycle at 95°F. It describes two modes of freeze protection below 59°F and 49°F and will suspend filtration if temperatures exceed 115°F or reach errors.
Eco 2 spaside instruction sheet
The document provides instructions for operating and programming a spa, including:
- If the water temperature exceeds 115°F, the heater will turn off, and above 122°F all outputs will disable until cooled.
- The filtration cycle can be programmed to run 1, 2, or 3 times daily for 60, 120, 180, or 480 minutes each cycle.
- By default, the spa will filter for 1 hour every 24 hours, maintaining the temperature at 95°F.
- Instructions are provided for operating the pump, accessory, light, and adjusting the temperature settings.
- The system enters a freeze protection mode if the temperature drops below 59°F by turning the pump on periodically.
Eco 1 spaside instruction sheet
The document provides instructions for operating and programming a spa control system. It describes how the system handles high temperatures, allows setting filter cycles for 1-3 times daily and durations of 60-180 minutes, and will default to a 24-hour filter cycle at 95°F if power is lost. It also explains how to operate the pump, light, and change the temperature setting, and describes freeze protection and error identification features.
Eco 2 pcb revisions
This document summarizes the revision history of PCB part number 33-0024-Rx from the initial R0 revision in January 1999 through the current R6 revision. It describes the changes made at each revision level such as PCB layout changes, software changes, additions of memory and removal of features. It also provides information to help identify the correct wiring diagram for a given revision level.
Eco 1 programming
This document provides instructions for an Eco 1 timed filtration system. It states to press and hold the light button to change the duration of filtration, and to press and hold the pump button to change the number of times filtration will occur. It also provides contact information for My Pool and Spas, a wholesale pool and spa parts supplier.
Deluxe spaside instruction sheet
The document provides instructions for setting various operating parameters of a pool or spa control system including time, filtration start/duration, temperature display units, panel lock, economy mode, freeze protection, and error conditions. It describes pressing the program key to access each setting and using up/down arrows to adjust before pressing program to save. It also lists default settings if power is lost.
Cs9700 software upgrade notice 3 07
The changes include:
- Two programmable filtration cycles, one for AM and one for PM.
- A new "Smart Summer Mode" that operates pumps and chlorinators during cooler times when temperatures exceed a threshold.
- Optional programming via Palm Pilot or keypad.
- New auxiliary circuit and circulation pump options.
- Updated owner's manuals to reflect changes.
Cs9700 llp settings 3 07
This document provides contact information for a wholesale pool and spa parts business called MyPoolSpas.com. It lists their phone number as 920-925-3094. The business sells wholesale pool and spa parts.
Control cord colors
This document provides contact information for a company called MyPoolSpas.com Spa Parts Wholesale Pool. They sell pool and spa parts and can be reached by calling 920-925-3094. The document lists the name of the company and their phone number.
9400 9600 programming
The document provides instructions for programming various settings on an HT-2 / 9600 Series spa control system, including time of day, filtration cycle start time and duration, economy mode start time and duration, temperature units (Fahrenheit or Celsius), and a spa-side lock feature. It also describes low level programming options that can be changed by positioning jumpers on the system board, including pump, blower, light, ozone, fiber optics, clock, current, circulation pump, and sensor calibration settings.
9300 programming
The document discusses four jumpers on a system board that can be positioned to change parameters of an equipment system. Jumper 1 sets either a high or low current limit. Jumper 2 selects whether temperature is displayed in Fahrenheit or Celsius. Jumpers 3 and 4 determine if the pumps run as single or two speed pumps. Positioning the jumpers allows customizing the system's operation based on electrical specifications and pump configuration.
85 0138 infrared remote-web
This document provides instructions for operating an infrared remote control for a pool or spa. It includes:
1. A key chart explaining the functions of each button on the remote control.
2. Instructions for programming the remote to control up to three home entertainment or automation devices by entering their unique four-digit codes.
3. Procedures for replacing batteries, searching for codes if a device is not responding, checking stored codes, and putting the remote into learning mode to add new functions from an original remote control.
85 0137 rev 1-palm pilot programming_web
The document provides instructions for programming a Palm Pilot PDA to communicate with and adjust the low-level programming of Hydro-Quip control systems. The PDA must have the Serve-Soft 2 software installed and unlocked using the username "Hydro-Quip" and password "Hq92u1". An ADIR-1 cartridge is used to connect the PDA to the control system. Low-level parameters can then be viewed and modified on the PDA screen by tapping selections. Additional features like current states, troubleshooting, and documentation can also be accessed.