Printing effects

4. Specification Additives Item Composition Appearance pH [10%] Ionicity Solubility [in water] Permafin-PN-01 Permafin-PN-37 Permafin-PN-119 Special urethane resins for ripple print [soft handle] Colorless to slightly yellowish viscous liquid 7 ± 1 5.5 ± 1 5.5 ± 1 Nonion Nonion Nonion Easily soluble at cold or warm water Permafin-RPP Special urethane resins for ripple print [stiff handle] Light beige viscous liquid 5 ± 1 Nonion Easily soluble at cold or warm water Crosslinker-UX Catalyst of Urethane resins Light beige viscous liquid 5 ± 1 Nonion Easily soluble Aquarepel-FC-1500 Fluoro polyacrylate White to yellowish liquid 2.5 ± 0.5 Cation Easily soluble Aquarepel-EX-001M Blocked polyisocyanate Light beige Dispersion 7 ± 1 Nonion Easily soluble Altraplex- AW Organic phosphoric compound Light yellowish clear liquid 9 ± 1 Weak anion Easily soluble Microderm-SKC Special silicone copolymer Milky white liquid 4.5 ± 1 Nonion Easily soluble Triplex-PTF Special polymer Off white liquid > 5 Anion Soluble

8. AQUAREPEL-FC 1500 Film protector for color Ripple print [by reactive dyes] Prevent color change/lost of dyes under strong alkalis Aquarepel-EX-001M Catalyst of FC 1500 in color ripple print Prevent drape property of fabrics Applying quantity: ca. 20% of FC 1500 applied Additives

9. Altraplex- AW Used in washing process after alkali ageing of Ripple Print Prevent yellowing of transparent print film after drying When neutralizing by Acid, used jointly in a bath Applying quantity: 3~5 g/l Triplex-PTF Thickener for viscosity control Applying quantity: x% [for viscosity ca. 5000 cps Additives

10. 1. Roller Print for Woven Recipe: Permafin--RPP : 95% Crosslinker-UX : 5% Thickener [Triplex-PTF] : x% [ca. 5000 cps of viscosity] ** If softer handle is required, increase the quantity of Permafin- PN-01 [or PN 37, PN 119, Microderm-SKC] while reducing the quantity of Permafin--RPP Print condition: Mangle padding [Roller Print]  Setting [190ºC x 100 yd/mm]  Alkali treatment [98% NaOH 32º ~ 35º Be]  Rinsing & neutralizing  Tentering [170ºC x 70 yd/min] Application

11. 2. Rotary print for woven Recipe: Permafin- PN-01 : 70% [or Permafin- PN 37, PN 119] Permafin- RPP : 25% Crosslinker-UX : 5% Thickener [Triplex-PTF] : X% [ca. 5000 cps of viscosity] Print condition: Printing  Curing [180ºC x 2 min]  Padding [98% NaOH 320 ~ 350 g/l]  Rinsing & neutralizing  Tentering [180ºC x 90 sec] Application

12. 3. Rotary print for knit: Recipe: Permafin- PN-01 : 55% [or Permafin- PN 37, PN 119] Permafin- RPP : 25% Crosslinker-UX : 5% Microderm- SKC : 15% Thickener [Triplex-PTF] : X% [ca. 5000 cps for viscosity] Print condition: Pre-treatment  Printing  Curing [180ºC x 2 min]  Padding [98% NaOH, 320~350 g/l]  Rinsing & neutralizing  tentering [180ºC x 1 min 30 sec] Application