This document provides information on several multi-sectional treatment tables and mat platforms. Model 6050-709 is a 3-section power economy hi-lo treatment table with electric height adjustment and manually adjustable sections. Model 5085 is a 500 lb capacity transfer board. Model 6065 is an electric hi-lo bo-bath table with motorized height adjustment and adjustable head/backrest section. Model 6053 is a similar 3-section hi-lo multi-position treatment table. Models 6020-709, 6040-709 and 6056-709 are manual, electric and electric hi-lo tilt tables, respectively. Model 6058 is a wheelchair accessible hi-lo tilt table. Model 6045-709 is an
This document discusses Namsung Industries' busbar fabrication systems. It introduces the NSB-606A, NSB-607A, NSB-601A, NSB-505, and NSB-707 systems. The NSB-606A and NSB-607A are large, multi-functional systems that can cut, bend, and punch busbars. The NSB-601A is a compact system that can also process panels. The NSB-505 is a portable system. The NSB-707 is a panel punching system. All the systems aim to improve production efficiency for busbar and panel fabrication.
This document describes the Hiker height adjustable table base system. It offers electric height adjustable 2, 3, and 4 leg configurations with aluminum bases that can be customized. The bases allow tabletop adjustment from 25.4 to 41.2 inches, meet industry standards, and have safety and operation features. Accessories like fixed height legs, control boxes, and privacy screens are also available.
This document provides information on various exercise and rehabilitation equipment, including:
- Pulley weight systems with different configurations of handles and weight capacities
- Storage racks and cabinets equipped with pulleys, mirrors, and storage for weights
- Transfer boards, goniometers, and dynamometers for measuring strength and range of motion
- Additional equipment like ladders, wheels, and boards for specific exercises
5.11 Police Tactical Gear Catalog.
Contact 5 Alarm for Police Equipment, Police Gear and Police Vehicle Equipment Sales, Service, Repairs or Training by messaging me on LinkedIn or calling 5 Alarm toll free at (800) 615-6789
Broaching is a machining process that uses a broach tool to remove material. There are different types of broaches and broaching methods depending on the operation. Broaching provides high production rates and accuracy for machining holes, slots and surfaces. It is well-suited for mass production but requires expensive broach tools and fixtures.
This document describes the design and fabrication of a mobile wood chipper. Key components include an electric motor, infeed chute, chipper disc assembly with three knives, discharge chute, and frame. Wood waste is fed into the infeed chute and engages with the rotating chipper disc equipped with three knives. The chips are ejected through the discharge chute. The machine is mounted on a framed platform equipped with wheels for mobility. Fabrication details are provided for each machine component. The chipper is designed to process wood waste up to 3 inches in diameter.
* Length of tapered portion (L) = 300 mm
* Large diameter (D1) = 50 mm
* Small diameter (D2) = 38 mm
* Half taper angle (α/2) = Tan-1[(D1-D2)/2L]
= Tan-1[(50-38)/2*300] = 5.71°
* Tailstock offset (h) = (D1-D2)Tan(α/2)/2
= (50-38)Tan(5.71°)/2 = 6 mm
The amount of offset of tailstock is 6 mm.
3M manufactures a variety of abrasive belts for grinding applications ranging from low to high pressure. Their Cubitron II and Trizact belts feature precisely shaped abrasive grain that provides faster cutting rates and longer belt life compared to conventional abrasives. These belts can help manufacturers consistently achieve tight tolerances on difficult to grind materials like stainless steel, titanium, and nickel alloys.
This document discusses Namsung Industries' busbar fabrication systems. It introduces the NSB-606A, NSB-607A, NSB-601A, NSB-505, and NSB-707 systems. The NSB-606A and NSB-607A are large, multi-functional systems that can cut, bend, and punch busbars. The NSB-601A is a compact system that can also process panels. The NSB-505 is a portable system. The NSB-707 is a panel punching system. All the systems aim to improve production efficiency for busbar and panel fabrication.
This document describes the Hiker height adjustable table base system. It offers electric height adjustable 2, 3, and 4 leg configurations with aluminum bases that can be customized. The bases allow tabletop adjustment from 25.4 to 41.2 inches, meet industry standards, and have safety and operation features. Accessories like fixed height legs, control boxes, and privacy screens are also available.
This document provides information on various exercise and rehabilitation equipment, including:
- Pulley weight systems with different configurations of handles and weight capacities
- Storage racks and cabinets equipped with pulleys, mirrors, and storage for weights
- Transfer boards, goniometers, and dynamometers for measuring strength and range of motion
- Additional equipment like ladders, wheels, and boards for specific exercises
5.11 Police Tactical Gear Catalog.
Contact 5 Alarm for Police Equipment, Police Gear and Police Vehicle Equipment Sales, Service, Repairs or Training by messaging me on LinkedIn or calling 5 Alarm toll free at (800) 615-6789
Broaching is a machining process that uses a broach tool to remove material. There are different types of broaches and broaching methods depending on the operation. Broaching provides high production rates and accuracy for machining holes, slots and surfaces. It is well-suited for mass production but requires expensive broach tools and fixtures.
This document describes the design and fabrication of a mobile wood chipper. Key components include an electric motor, infeed chute, chipper disc assembly with three knives, discharge chute, and frame. Wood waste is fed into the infeed chute and engages with the rotating chipper disc equipped with three knives. The chips are ejected through the discharge chute. The machine is mounted on a framed platform equipped with wheels for mobility. Fabrication details are provided for each machine component. The chipper is designed to process wood waste up to 3 inches in diameter.
* Length of tapered portion (L) = 300 mm
* Large diameter (D1) = 50 mm
* Small diameter (D2) = 38 mm
* Half taper angle (α/2) = Tan-1[(D1-D2)/2L]
= Tan-1[(50-38)/2*300] = 5.71°
* Tailstock offset (h) = (D1-D2)Tan(α/2)/2
= (50-38)Tan(5.71°)/2 = 6 mm
The amount of offset of tailstock is 6 mm.
3M manufactures a variety of abrasive belts for grinding applications ranging from low to high pressure. Their Cubitron II and Trizact belts feature precisely shaped abrasive grain that provides faster cutting rates and longer belt life compared to conventional abrasives. These belts can help manufacturers consistently achieve tight tolerances on difficult to grind materials like stainless steel, titanium, and nickel alloys.
Hausmann Industries offers a line of pediatric tables called Green-Line that are made from environmentally safer materials. They describe 9 models of pediatric tables ranging in size from 43" to 72" long that vary in features like integrated scales, drawers, doors, and upholstery. The tables are made from materials with no added urea-formaldehyde for improved indoor air quality.
This document provides information on environmentally friendly ("Green-Line") medical tables and equipment. It introduces Green-Line products that are indicated by a Green-Line icon and discusses how they offer an environmentally safer alternative to traditional materials for improved air quality. The document then provides details on specific Green-Line table models, including their features, materials used, and options.
Kemuri Kit 1 - An improved smoking chimney for caring people.lenand
An improved smoking chimney for caring people. This describes the user features for first phase of development. Kemuri KK1.2 is suitable for organisations providing social care - such as some housing associations.
This document discusses Logicterm's work with ISO integration standards over 20 years of research and development. It summarizes Logicterm's approach of using top-down logical data models and concepts that cross domains to create integration models. It provides examples of Logicterm's work modeling children's social services and developing a public sector ontology. The document concludes by outlining next steps to pilot an ISO standard for integration in a proof of concept with two or three application domains.
Occupational therapy promotes health by enabling people to perform meaningful occupations like work, leisure, self-care, and social participation. Occupational therapists use analysis of physical, psychosocial, and environmental factors to address barriers to occupation. They work with individuals and communities to facilitate engagement in occupations that support health and well-being. Occupational therapy draws from various disciplines to develop its knowledge base and aims to define its scope while maintaining flexibility.
Licensing Journal - Working With Licensing Agents and ConsultantsMark Hess
This document discusses factors for companies to consider when deciding whether to work with a licensing agency or consultant. It emphasizes that there is no single right approach and that "it depends" on each company's unique situation and goals. The document also outlines key qualifications companies should evaluate in potential licensing agencies or consultants, including their ability to dedicate sufficient time, assemble a talented team, and commit financial resources to effectively manage the licensing program. Overall, it argues that licensing requires a dedicated, team-oriented approach to achieve success.
This document provides information about ProTeam athletic training equipment, including modular taping stations, split leg tables, treatment tables, taping tables, lockers, and S&W wood treatment furniture. Key details include various models of each product with their dimensions and optional features. Custom laminate and upholstery options are available. Assembly is required for some products.
The document provides specifications for modular taping stations with different configurations. It describes models with 2, 3, 4, or 5 seats that come in various heights, depths, and lengths. The modular components can be mixed and matched to customize each station. Dimensions and options like backrests, drawers, and shelves are listed for each model. Installation layout examples and individual component details are also shown.
This document showcases various types of artwork created by Becca Ramos including magical enchantment, black and white pieces, charcoal and ink works, color artwork, photos edited in Photoshop, and self portraits.
Hausmann Industries is introducing a new line of eco-friendly medical furniture called Green-Line. The Green-Line products use environmentally safer materials that produce less VOCs and meet CARB emission standards. The Green-Line includes treatment tables, pediatric tables, lounges, and portable tables made without added urea-formaldehyde or PVC. Customers can request any Hausmann product to be made with Green-Line specifications.
The document discusses various types of parallel bars offered by Hausmann Industries for physical therapy or rehabilitation settings. It describes manual parallel bars that adjust in height and width manually as well as power parallel bars that adjust electrically. Models vary in length, width adjustment range, height adjustment range, and additional features like folding or wall mounting options.
This document describes several pediatric and examination tables:
1) Model 4975 is a pediatric table with a child-friendly molded plastic chassis, padded upholstered top, built-in toddler car seat, and drawer.
2) Models 4970 and 4972 are pediatric tables with padded tops, laminate drawers and doors for storage, and come in different colors.
3) Model 4904 is a pediatric table with a dalmatian laminate finish and optional paper dispenser.
4) Model 4416 is a heavy-duty examination table with a motorized backrest, 600 lb capacity, electrical outlet, and optional paper dispenser.
The document discusses bariatrics, which is the branch of medicine dealing with obesity treatment and prevention. It describes various bariatric products and equipment offered by Hausmann Industries, including tables, mat platforms, and parallel bars designed to accommodate heavier patients. The products have increased weight capacities, adjustable widths and heights, and some are powered for ease of use.
The document describes several models of adjustable table legs and bases. It provides information on the style, height adjustment mechanisms, weight capacities, dimensions and features of the Hiker, Arise, Ascent, and Twin-Rise series. Additional models include a motor retrofit kit and an adjustable table base with casters. Specifications such as height ranges, weight limits, and compatible table sizes are given for each.
i. This document provides specifications for a double column bandsaw machine model DBM-300, including its key features and optional features.
ii. The machine has a hydraulically controlled dual clamping system and can cut materials up to 300mm.
iii. It has features like automatic height control, powered chip removal, and complete hydraulic, electrical, and cooling systems.
The document describes the HJ/K series of mobile reeling and coiling machinery. The HJ/K series provides a practical and economical solution for large diameter spooling and coiling applications. It utilizes a hydraulic jack and optional slide drive to handle reels and material with ease using minimal manpower. The HJ/K series comes in several models to accommodate different reel diameters and weights. Optional accessories include soft starts, controls, guards, and lifting equipment.
The document describes the SM Series of high performance machining centers from Smart Machine Tool. It provides specifications for several models including the SM 212/312/412/316, SM 600/1000, and SM 965/1165/1365/1565/1575. Key features highlighted include box way construction, spindle configurations with up to 12,000 rpm, tool changers with 24-40 tools, rigid machine structures, and chip removal systems.
The document describes the SSQ MultiPro Roof Panel Machine from Drexel Metals LLC. It includes specifications for the machine such as its dimensions, weight, speed, and hydraulic drive system. It can form various metal materials into different panel profiles using interchangeable roller systems. Standard features include safety controls and quick-change components. Expandable options include overhead reels, decoilers, and run out tables.
Our Double Sided Plate Beveling Machine employs a unique 3D trolley which allows the machine to be quickly inverted to create double-sided X- or K-bevels. Hurry up - Explore & Shop now!
Hausmann Industries offers a line of pediatric tables called Green-Line that are made from environmentally safer materials. They describe 9 models of pediatric tables ranging in size from 43" to 72" long that vary in features like integrated scales, drawers, doors, and upholstery. The tables are made from materials with no added urea-formaldehyde for improved indoor air quality.
This document provides information on environmentally friendly ("Green-Line") medical tables and equipment. It introduces Green-Line products that are indicated by a Green-Line icon and discusses how they offer an environmentally safer alternative to traditional materials for improved air quality. The document then provides details on specific Green-Line table models, including their features, materials used, and options.
Kemuri Kit 1 - An improved smoking chimney for caring people.lenand
An improved smoking chimney for caring people. This describes the user features for first phase of development. Kemuri KK1.2 is suitable for organisations providing social care - such as some housing associations.
This document discusses Logicterm's work with ISO integration standards over 20 years of research and development. It summarizes Logicterm's approach of using top-down logical data models and concepts that cross domains to create integration models. It provides examples of Logicterm's work modeling children's social services and developing a public sector ontology. The document concludes by outlining next steps to pilot an ISO standard for integration in a proof of concept with two or three application domains.
Occupational therapy promotes health by enabling people to perform meaningful occupations like work, leisure, self-care, and social participation. Occupational therapists use analysis of physical, psychosocial, and environmental factors to address barriers to occupation. They work with individuals and communities to facilitate engagement in occupations that support health and well-being. Occupational therapy draws from various disciplines to develop its knowledge base and aims to define its scope while maintaining flexibility.
Licensing Journal - Working With Licensing Agents and ConsultantsMark Hess
This document discusses factors for companies to consider when deciding whether to work with a licensing agency or consultant. It emphasizes that there is no single right approach and that "it depends" on each company's unique situation and goals. The document also outlines key qualifications companies should evaluate in potential licensing agencies or consultants, including their ability to dedicate sufficient time, assemble a talented team, and commit financial resources to effectively manage the licensing program. Overall, it argues that licensing requires a dedicated, team-oriented approach to achieve success.
This document provides information about ProTeam athletic training equipment, including modular taping stations, split leg tables, treatment tables, taping tables, lockers, and S&W wood treatment furniture. Key details include various models of each product with their dimensions and optional features. Custom laminate and upholstery options are available. Assembly is required for some products.
The document provides specifications for modular taping stations with different configurations. It describes models with 2, 3, 4, or 5 seats that come in various heights, depths, and lengths. The modular components can be mixed and matched to customize each station. Dimensions and options like backrests, drawers, and shelves are listed for each model. Installation layout examples and individual component details are also shown.
This document showcases various types of artwork created by Becca Ramos including magical enchantment, black and white pieces, charcoal and ink works, color artwork, photos edited in Photoshop, and self portraits.
Hausmann Industries is introducing a new line of eco-friendly medical furniture called Green-Line. The Green-Line products use environmentally safer materials that produce less VOCs and meet CARB emission standards. The Green-Line includes treatment tables, pediatric tables, lounges, and portable tables made without added urea-formaldehyde or PVC. Customers can request any Hausmann product to be made with Green-Line specifications.
The document discusses various types of parallel bars offered by Hausmann Industries for physical therapy or rehabilitation settings. It describes manual parallel bars that adjust in height and width manually as well as power parallel bars that adjust electrically. Models vary in length, width adjustment range, height adjustment range, and additional features like folding or wall mounting options.
This document describes several pediatric and examination tables:
1) Model 4975 is a pediatric table with a child-friendly molded plastic chassis, padded upholstered top, built-in toddler car seat, and drawer.
2) Models 4970 and 4972 are pediatric tables with padded tops, laminate drawers and doors for storage, and come in different colors.
3) Model 4904 is a pediatric table with a dalmatian laminate finish and optional paper dispenser.
4) Model 4416 is a heavy-duty examination table with a motorized backrest, 600 lb capacity, electrical outlet, and optional paper dispenser.
The document discusses bariatrics, which is the branch of medicine dealing with obesity treatment and prevention. It describes various bariatric products and equipment offered by Hausmann Industries, including tables, mat platforms, and parallel bars designed to accommodate heavier patients. The products have increased weight capacities, adjustable widths and heights, and some are powered for ease of use.
The document describes several models of adjustable table legs and bases. It provides information on the style, height adjustment mechanisms, weight capacities, dimensions and features of the Hiker, Arise, Ascent, and Twin-Rise series. Additional models include a motor retrofit kit and an adjustable table base with casters. Specifications such as height ranges, weight limits, and compatible table sizes are given for each.
i. This document provides specifications for a double column bandsaw machine model DBM-300, including its key features and optional features.
ii. The machine has a hydraulically controlled dual clamping system and can cut materials up to 300mm.
iii. It has features like automatic height control, powered chip removal, and complete hydraulic, electrical, and cooling systems.
The document describes the HJ/K series of mobile reeling and coiling machinery. The HJ/K series provides a practical and economical solution for large diameter spooling and coiling applications. It utilizes a hydraulic jack and optional slide drive to handle reels and material with ease using minimal manpower. The HJ/K series comes in several models to accommodate different reel diameters and weights. Optional accessories include soft starts, controls, guards, and lifting equipment.
The document describes the SM Series of high performance machining centers from Smart Machine Tool. It provides specifications for several models including the SM 212/312/412/316, SM 600/1000, and SM 965/1165/1365/1565/1575. Key features highlighted include box way construction, spindle configurations with up to 12,000 rpm, tool changers with 24-40 tools, rigid machine structures, and chip removal systems.
The document describes the SSQ MultiPro Roof Panel Machine from Drexel Metals LLC. It includes specifications for the machine such as its dimensions, weight, speed, and hydraulic drive system. It can form various metal materials into different panel profiles using interchangeable roller systems. Standard features include safety controls and quick-change components. Expandable options include overhead reels, decoilers, and run out tables.
Our Double Sided Plate Beveling Machine employs a unique 3D trolley which allows the machine to be quickly inverted to create double-sided X- or K-bevels. Hurry up - Explore & Shop now!
Pressure Balanced Adjustable Chokes are the advanced version of standard needle & seat type chokes, where the operating torque is significantly reduced by balancing the pressure across the gate.
Special Multistage Trim - Worldwide Oilfield Machinewomgroup
Special Multistage trim can be provided as a solution to severe service applications including anti cavitation, high pressure drop, and low noise services.
WOM Group provides Flowback choke that is designed with Hammer Union connections and is well suited for fracking, flow back, and well service applications.
Magnum Choke, Magnum Choke Surface Equipment - WOM Groupwomgroup
This document provides information on various choke models produced by WOM including:
- Positive and adjustable chokes which can be converted between each other using interchangeable components.
- A pressure balanced adjustable choke model (WPB) which reduces operating torque without a gearbox.
- A flowback choke model (WFB) designed for fracking and well service applications with hammer union connections.
- Plug and cage (WPC) and external sleeve (WES) choke models for high/medium pressure drop applications, available in various sizes and pressure ratings.
- A modular WES(H2) model that can be converted between choke types and manual/actuated operation with minimal disassembly
WOM Group, one of the leading Adjustable Chokes Manufactures. Adjustable Chokes comes up with a standard choke body with an adjustable choke bonnet assembly and Seat. Read more about Adjustable Chokes.
Plug and Cage Choke - Worldwide Oilfield Machinewomgroup
The WOM control chokes are available with a plug & cage or an external sleeve trim. WOM's Plug and Cage Choke are designed to provide accurate flow control throughout its operating range.
WOM Group, one of the leading Adjustable Chokes Manufacturers. Adjustable Chokes comes up with a standard choke body with an adjustable choke bonnet assembly and Seat. Read more about Adjustable Chokes.
Plug and Cage Choke, Plug and Cage Control Choke - WOM Groupwomgroup
This document provides information on various choke models produced by WOM including:
- Positive and adjustable chokes with interchangeable components
- Pressure balanced adjustable chokes that reduce operating torque
- Plug and cage chokes for high capacity applications
- External sleeve chokes that isolate body wear for high pressure applications
- A modular choke model that can be converted between designs and manual/actuated operation
The document discusses specifications, features, applications and pressure ratings for each choke model. Pressure balanced and modular designs allow for easier operation and conversion between designs. The chokes are suitable for a wide range of oil and gas applications.
WOM's External Sleeve chokes are designed to provide accurate flow control throughout its operating range. The externally guided sleeve controls the opening and rate of flow.
This document provides information on various choke models produced by WOM Group, including positive chokes, adjustable chokes, pressure balanced adjustable chokes, plug and cage chokes, external sleeve chokes, and drilling chokes. It discusses the features and applications of each choke model, and provides specifications on available sizes, pressure ratings, material options, and dimensions. The document aims to outline WOM Group's choke product offerings and how their different choke designs can provide solutions for various oil and gas applications.
This document provides information on two cable jacket strippers, the MK04 and MK01A. The MK04 is designed for stripping large diameter cables from 0.79 to 2.36 inches. It features adjustable blades, roller support for smooth stripping, and can perform spiral cuts, longitudinal cuts or end stripping. The MK01A is for stripping insulation from 0.31 to 0.98 inch cables and removing copper screening from coaxial cables. It also has adjustable blades and roller support for precise stripping of materials like rubber, PVC, nylon and cotton. Both strippers are designed for industrial environments and consistent, repetitive stripping jobs.
Band knife cutting machines use an endless loop blade similar to a band saw to cut fabric and other materials. There are vertical and horizontal band knife machines depending on the material. Vertical machines use narrower blades for better accuracy while cutting foam. Horizontal machines have wider blades for materials like leather and foam. Band knife machines provide accurate cuts and can cut intricate patterns compared to other cutting machines. They require less minimum cutting allowance than die cutters and are faster and less labor intensive than other options.
WEN 3920 VS Dremel MS20-01 VS DEWALT DW788 VS Shop Fox W1713 VS Rockwell RK73...
2009 Hausmann Catalog Ssec2 p36-53
1. M U LT I - S E C T I O N A L T R E AT M E N T TA B L E S
A. Model 6050-709
Power Economy Hi-Lo 3-Section
Treatment Table
FEATURES:
• Electric motorized height
adjustment from 22” to 40” high.
• Rear section raises up to 87°.
A. Model 6050-709
• Manual headrest raises up to 45° and down
to 90° below horizontal.
• 2” high-density urethane foam top.
• Breathing slot in head section.
• Heavy duty steel frame is powder coated in
neutral cream finish.
• 3 1⁄2 ” clearance under frame.
• Includes “hands free” foot control.
• 110V, 60 Hz, 3 Amps. U.L. Listed.
• 709 Gray vinyl upholstery.
MODEL LENGTH WIDTH HEIGHT
6050-709 76” 26” 22”- 40”
OPTIONS FOR MODEL 6050-709:
*072 – Set of (4) 3” locking casters.
*FACTORY INSTALLED
B. Model 5085 B. Model 5085
Bariatric Wood Transfer Board
SEE MORE
TRANSFER
FEATURES:
• 500 lb. Patient weight capacity. BOARDS ON
• 5⁄8 ” thick Birch Plywood with tapered ends. PAGE 58
• Two perpendicular Hand Slots.
MODEL LENGTH STYLE
5085 35” x 8” Two Cutouts
C. Model 6065
C. Model 6065 Electric Hi-Lo Bo-Bath Table
FEATURES:
• 500 lb. Patient weight capacity.
• Combination Treatment Table and Mat Table.
• Large 40” wide x 76” long 1 1⁄2 ” firm density
foam gray upholstered top with radius
seamless corners.
• 27” long x 40” wide adjustable Head/
Backrest elevates up to 74° with sturdy friction
locking device and dual release handles.
• Motorized height adjustment from 18”
wheelchair height to 37”H.
• Equipped with (4) 3” swiveling locking casters.
• 110V, 60 Hz., 1.8 Amps.
MODEL LENGTH WIDTH HEIGHT
6065 76” 40” 18” - 37”
36
2. THERAPY AND REHAB EQUIPMENT
B. Model 6053
3-Section Hi-Lo Multi-Position
Treatment Table
FEATURES:
• Multi-position table can be used for a wide
variety of therapy and treatment functions.
• 76”L x 27”W 3-section 1 1⁄2 ” firm density
gray vinyl top features contoured face/nose
cutout in head section.
• Motorized height adjustment from 19”
wheelchair height to 37”H.
• “Hands-free” Foot Control operation.
• Adjustable head section, 15” x 27”, raises up
to 45° and lowers down to 90° below
horizontal.
• 22”L x 27”W middle seat section is stationary
• 39”L x 27”W Leg/Backrest section raises
easily up to 73° with sturdy friction locking
device and dual release handles.
• Top sections have welded steel support
frames.
• Includes (4) 3” diameter swiveling casters with
locking brakes.
• 110V., 60 Hz, 1.8 amps. U.L. listed.
MODEL LENGTH WIDTH HEIGHT
6053 76” 27” 19”- 37”
Note: Model 6053 has replaced Model 6052
SELECT FROM A VARIETY OF BARIATRIC PRODUCTS
4723 4416 2174 4795 2038
SEE PAGE 13 SEE PAGE 19 SEE PAGE 33 SEE PAGE 35 SEE PAGE 34
6045 1440 6185 1386 1564
SEE PAGE 39 SEE PAGE 40 SEE PAGE 62 SEE PAGE 71 SEE PAGE 77
37
3. T I LT TA B L E S
A. Model 6020-709 B. Model 6040-709
A. Model 6020-709 B. Model 6040-709
Common Features Manual Crank Tilt Table Electric Tilt Table
TILT TABLES — MODELS 6020-709, • Manual crank tilt mechanism locks in at any • Heavy duty electrical tilt mechanism.
6040-709, 6056-709: angle. Crank handle is removable. • Pneumatic hand control operable from either
• Gray vinyl upholstery. • Fixed table height is 33” high. side of table.
• 2” High-Density urethane foam top. • Removable padded footboard. • Fixed table height is 33” high.
• Tilt angle indicator from 0° to 90°. • Removable padded footboard.
MODEL LENGTH WIDTH HEIGHT
• Three extra-wide safety straps. • Tilts from horizontal to 90° at fixed rate of
6020-709 78” 28” 33”
• Set of (4) 4” locking casters. speed of 3° per second.
• Heavy duty steel frame is powder • Limit switches.
coated in neutral cream finish. OPTIONS • Hospital grade plug.
• 3 1 ⁄ 2 ” clearance under frame.* FOR MODELS 6020-709, 6040-709, 6056-709
• 110V, 60 Hz, 3 Amps. U.L. Listed.
• Designed for rehab & therapy. 6026 – Additional Safety Strap
• Not designed for cardiac testing. *077 – (4) 6” casters increase height and MODEL LENGTH WIDTH HEIGHT
clearance by 2” 6040-709 78” 28” 33”
C. Model 6056-709
Electric Hi-Lo Tilt Table
SPECIAL FEATURES:
C. Model 6056-709
• (2) Heavy duty motors independently operate
height and tilt.
• Electrical Hi-Lo motorized lift from
25” to 39” high.
• Electrical tilt mechanism 0° to 90°.
• Pneumatic hand control is accessible from
either side of the table.
• (2) Patient support handles.
• Stainless steel fixed footboard.
• Limit switches.
• Hospital grade plug.
• 110V, 60 Hz, 3 Amps. U.L. Listed.
MODEL LENGTH WIDTH HEIGHT
6056-709 78” 28” 25”- 39”
38
4. THERAPY AND REHAB EQUIPMENT
Model 6058 elevates to 33” high
Emergency Tilt Release Handle
A. Model 6058
Model 6058
lowers to 19” for
wheelchair transfer
A. Model 6058
Wheelchair Accessible
Hi-Lo Tilt Table
FEATURES:
• Unique wheelchair accessible design is ideal
for rehabilitation or nursing home use.
• Electric operated actuators provide quick and
smooth control of the Tilt and Height
adjustments. B. Model
B. Model 6045-709 6045-709
• Electric Hi-Lo lift mechanism adjusts from 19”
Bariatric Electric Tilt Table
low wheelchair height to 33” high.
FEATURES:
• Tilts from horizontal to 90°. Unit must be
raised to maximum height before tilting. • Electric Tilt Mechanism
• Easy-to-read tilt angle indicator on both sides. with heavy-duty motor
for up to 500 lb. patients.
• Pivoting Footboard with rubber tread. Angle
of the Footboard tilt is adjustable with spring • Tilt indicator displays angle of tilt 0° to 90°.
loaded dual controls. • Extra-wide 34” x 77” long top upholstered
• “Hands-free” Foot Control operation. in 709 Gray vinyl with 2” thick High-Density
urethane foam.
• Includes unique Emergency Tilt Release
Handle that manually lowers tilted table back • 23” extra-wide x 18” deep fixed foot board.
to horizontal position. • Three extra-long patient safety straps.
• Comfortable 76” x 26” cushioned top is • Fixed table height of 33”.
available in Dove Gray Vinyl. • Hand Control operable from either side of
• (3) safety straps with “hook and loop” the table.
closures. • Set of (4) 3” locking casters.
• (4) 3” dia. swiveling locking casters. • Heavy-duty gauge steel frame is powder
• Heavy-duty steel frame is cream powder coated in neutral cream finish.
coated epoxy finish. • 3.5” clearance under frame.
• 110V, 60Hz. 3.5 amps. Hospital Grade Plug. • 110V, 60 Hz, 3.5 Amps.
• Not designed for cardiac testing use. • Hospital grade plug. UL Listed.
MODEL LENGTH WIDTH HEIGHT MODEL LENGTH WIDTH HEIGHT
6058 76” 26” 19”-33” 6045-709 77” 34” 33”
39
5. P O W E R M AT I C M AT P L AT F O R M S
A. Model 1440-57-113
A. Series 1440 COLORS:
Common Features Dual Lift Powermatic ® Laminate – Black laminate base with satin
DUAL LIFT POWERMATIC® MAT PLATFORMS — aluminum trim and levelers.
Mat Platforms
SERIES 1440, 1449:
UPHOLSTERY – 113 BLUE OR 119 GRAY
MODEL WIDTH LENGTH HEIGHT
1440-46-113 4’ 6’ 19”- 28”
1440-46-119 4’ 6’ 19”- 28”
• Power height adjustment from 19”
1440-47-113 4’ 7’ 19”- 28” 113 BLUE 119 GRAY
wheelchair access height to 28”H.
• Two direct drive, synchronized lift 1440-47-119 4’ 7’ 19”- 28”
SPECIAL ORDER TOP COLORS (NOT QUICKSHIP)
mechanisms for unsurpassed power. 1440-57-113 5’ 7’ 19”- 28”
• Tear resistant, seamless nylon-reinforced 1440-57-119 5’ 7’ 19”- 28”
vinyl upholstered top with 2” High-
Density urethane foam padding for 1440-68-113 6’ 8’ 19”- 28”
121 GREEN 122 BLACK
comfort and rounded corners for safety. 1440-68-119 6’ 8’ 19”- 28”
• “Hands-Free” foot control. You must specify upholstery color with order.
• Hospital grade plug.
• 110V, 60Hz, 2.8 Amps. U.L. Listed
Model 1440-47-119
40
6. THERAPY AND REHAB EQUIPMENT
B. Model 1449-57
Shown with option:
3002-57 – Mat
C. 3002-57 Mat attached with
VELCRO® brand fasteners
B. Series 1449
Dual Lift Powermatic ®
Mat Platforms with
Black Laminate Tops
SPECIAL FEATURES:
• Will accommodate 2” thick reversible,
removable mat, ordered separately.
See #3002 below.
• Black laminate rimless subtop.
• Power height adjustment from 19” wheelchair
access height to 28”H.
• Two direct drive synchronized lift mechanisms
for unsurpassed power.
• “Hands-free” foot control.
• Hospital grade plug.
• 110V, 60Hz, 2.8 Amps. U.L. Listed
MODEL WIDTH LENGTH HEIGHT OPT.PAD
1449-46 4’ 6’ 19”-28” 3002-46
1449-47 4’ 7’ 19”-28” 3002-47
1449-57 5’ 7’ 19”-28” 3002-57
1449-68 6’ 8’ 19”-28” 3002-68
C. Series 3002
Platform or Floor Mats
COLORS:
Reversible – Blue on one side, gray on the other
with gray 2” border.
MODEL WIDTH LENGTH HEIGHT
3002-46 4’ 6’ 2”
3002-47 4’ 7’ 2”
3002-57 5’ 7’ 2”
3002-68 6’ 8’ 2”
For additional information, call 1-800-440-4SKF (4753)
e-mail: skfusainfo@skf.com, or visit www.skfusa.com
41
7. M AT P L AT F O R M S
A. Model 1412-47-346-122
A. Series 1412 B. Models 1420, 1421
Common Features Upholstered Mat Platforms Space Saver Mat Platform
UPHOLSTERED MAT PLATFORMS — SPECIAL FEATURES: SPECIAL FEATURES:
MODELS 1412, 1420, 1421:
• All models have (6) legs for increased strength • Fold-away design saves floor space.
and stability (except 1412-46). • Sturdy, floor-supported mounting plate.
MODEL WIDTH LENGTH HEIGHT • Three folding high pressure laminate legs.
• 2” High-Density urethane foam. • Wall fasteners not included.
1412-46* 4’ 6’ 18”
• Upholstered in seamless heavy duty,
1412-47* 4’ 7’ 18” MODEL WIDTH LENGTH HEIGHT
tear-resistant nylon-reinforced vinyl.
• High pressure laminate 1412-57* 5’ 7’ 18” 1420* 4’ 7’ 18”
finish on all exterior surfaces. 1412-68* 6’ 8’ 18” 1421* 5’ 7’ 18”
• 18” height is convenient for therapist and (projects 8” when closed)
wheelchair accessible for patient. UPHOLSTERY – 113 BLUE OR 119 GRAY
COLORS:
Laminate – 346 Natural Oak or
927 Folkstone Gray
Upholstery – 4 nylon-reinforced vinyl colors. 113 BLUE 119 GRAY
*You must specify laminate and upholstery
color with order. SPECIAL ORDER TOP COLORS (NOT QuickShip)
121 GREEN 122 BLACK
Model 1420-346-119
(folded)
B. Model 1420-346-119
42
8. THERAPY AND REHAB EQUIPMENT
A. Model 1427-57-113
Common Features
MAT PLATFORMS – SERIES 1425, 1427:
• Extremely stable lift system can easily lift
up to 750 Lbs. from 20” wheelchair
height to 30”H. A. Series 1427 B. Series 1425
• Hydraulic cylinders are built into each
Bariatric Electric Mat Platforms Crank Hydraulic Mat Platforms
(4) corner steel legs.
SPECIAL FEATURES: SPECIAL FEATURES:
• Seamless nylon-reinforced vinyl is
• Electrically activated hydraulic cylinders are • Durable, super-strength Crank Hydraulic
tear resistant.
built into each (4) corner steel legs. system can lift 750 lbs.
• 2” High-Density urethane foam top.
• Motorized power height adjustment. • Easy-to-use hand crank height adjustment with
• Steel frame is durable Black powder Fold-away handle.
• “Hands-Free” foot control operation.
coated finish.
• Legs have levelers for uneven floors. Series 1427 Series 1425
COLORS: (SEE PAGE 42) MODEL WIDTH LENGTH HEIGHT MODEL WIDTH LENGTH HEIGHT
Upholstery – 113 Blue, 119 Gray, 1427-47* 4’ 7’ 20”-30” 1425-46* 4’ 6’ 20”-30”
121 Green, 122 Black. 1425-47*
1427-57* 5’ 7’ 20”-30” 4’ 7’ 20”-30”
*You must specify upholstery color with order.
1427-68* 6’ 8’ 20”-30” 1425-57* 5’ 7’ 20”-30”
1425-68* 6’ 8’ 20”-30”
B. Model 1425-68-119
#43
#41 (shown with
anti-slip bottom
surface)
Optional Bolsters
(see page 45)
43
9. M AT P L AT F O R M S / P I L L O W S
A. S-201, S-202, S-205,
S-206, S-207, S-208
Econo Mat Platforms
FEATURES:
• Sturdy panel end legs
with wear-resistant Folkstone Gray laminate.
• 2” foam standard, 18” height.
• Upholstered in seamless nylon reinforced
113 Blue or 119 Gray.
MODEL COLOR WIDTH LENGTH HEIGHT
S-201 Blue 4’ 7’ 18”
S-202 Gray 4’ 7’ 18”
S-205 Blue 5’ 7’ 18” A. Model S-205
S-206 Gray 5’ 7’ 18”
S-207 Blue 6’ 8’ 18”
S-208 Gray 6’ 8’ 18”
B. Series 1411
Mat Platforms with Black
Laminate Top
FEATURES:
• Will accommodate optional 2” thick
removable 3002 reversible mats.
• Mats are attached to platform with
VELCRO® brand fasteners.
• Black laminate rimless sub top adds
to comfort and ease of cleaning.
• 18” height is wheelchair accessible.
• Natural Oak high pressure laminate finish.
B. Model 1411-47-346 • All models have (6) legs for increased strength
Shown with option: 3002-47 Mat and stability (except 1411-46).
COLORS:
Laminate – 346 Natural Oak
MODEL WIDTH LENGTH HEIGHT OPT.MAT
1411-46-346 4’ 6’ 18” 3002-46
1411-47-346 4’ 7’ 18” 3002-47
C. Model 3002-47
1411-57-346 5’ 7’ 18” 3002-57
1411-68-346 6’ 8’ 18” 3002-68
D. Series 3042
D. Model 3042-46 C. Series 3002
Folding Floor Mats
Platform or Floor Mats
FEATURES:
• Nylon-reinforced vinyl mat with 2” thick
• Accordion folding, 2’ wide panels.
100 I.L.D. urethane foam padding.
• 2” extra-firm foam.
• (4) handles for easy moving and hanging.
• Nylon-reinforced vinyl cover.
COLORS:
• Easily joined to other mats with Velcro® brand
Reversible – Blue on one side, Gray on the
fasteners on mat ends.
other with a Gray 2” border.
• Two-tone Blue and Gray.
MODEL WIDTH LENGTH HEIGHT
MODEL WIDTH LENGTH HEIGHT
3002-46 4’ 6’ 2”
3042-46 4’ 6’ 2”
3002-47 4’ 7’ 2”
3042-48 4’ 8’ 2”
3002-57 5’ 7’ 2”
3002-68 6’ 8’ 2”
44
10. THERAPY AND REHAB EQUIPMENT
A. POSITIONING PILLOWS
B. TABLE PILLOWS
Model 32-700
Model 36
Model
Model 39 35-709
Model 37
Model 33 Model 30
A. Positioning Pillows MODEL TYPE LENGTH WIDTH HEIGHT B. Table Pillows
FEATURES: 30 Round Bolster 24” 6” Dia. – • Firm urethane foam with Resist-All™
• Firm High-Density urethane foam with 31 Round Bolster 24” 8” Dia. – vinyl upholstery.
vinyl sewn covering. COLORS:
33 Cube 12” 8” 3”
COLORS: Upholstery – 18 standard vinyl colors.
Color for the Positioning Pillows is Medium Blue. 34 Cube 12” 8” 6” 5 PVC- Free urethane colors.
36 20° Wedge 18” 24” 6”
MODEL TYPE LENGTH WIDTH HEIGHT
37 20° Wedge 32” 20” 12”
32 Full Size Pillow 22” 14” 3”
38 Cube w/40° edge 32” 10” 12”
35 Small Pillow 12” 14” 3”
39 Cube w/40° edge 32” 20” 12”
C. Models 41, 42, 43
C. “ANTI-SLIP” BOLSTERS
“Anti-Slip” Positioning Bolsters
• Firm High-Density urethane foam with Medium
Model 42 Model 43 Blue vinyl cover.
Model 41
• Bolsters have “anti-slip” bottom surface that
stays in place on mats or tables.
MODEL TYPE LENGTH WIDTH HEIGHT
41 45° Wedge 16” 8” 8”
42 Half-round 17” 8” 7”
43 20° Wedge 32” 20” 12”
D. Model 3004 D. Model 3004
Positioning Wedge System
• Versatile wedge system for positioning of children or
adolescents.
• Consists of (2) large and (2) small vinyl covered foam
wedges with VELCRO® brand fasteners.
• Wedges assemble in a variety of configurations.
• Vinyl color is Medium Blue.
MODEL LENGTH WIDTH HEIGHT
3004 31” 20” 17”
Consists of: (2) Small Wedges 14” 20” 8”
(2) Large Wedges 27” 20” 14”
E. Model 3003 E. Model 3003
Multi-Function Twin Wedge Set
• Two “twin” High-Density urethane foam Wedges
covered in Medium Blue vinyl.
• Each 20” x 20” x 10”H Wedge has
VELCRO® brand fasteners so Wedges can be attached
back-to-back or put together as a Cube.
• Wedges can also be used separately for head, leg or
knee support.
MODEL WIDTH LENGTH HEIGHT
3003 20” 20” 10”
45
11. HUGGER WEIGHTS, DUMBBELLS & RACKS
Series 5580
Series 5580 Hugger®
Weights
Hugger ® Gold-Line
Wrist & Ankle Weights
FEATURES:
• Vinyl weights color-coded and weight
#5580–1
imprinted for ease of use.
• Extra long 17” strap with hook and loop
fasteners allows you to double-strap weight in
place for added security.
• Heavy-duty stitching assures greater strength
and longevity. MODEL LBS. COLOR
• Extra-large brass hanging grommet. 5580-05 ½ Tan
• All weights 6 lbs. and over have (2) straps
with hook and loop fasteners and (6) vertical 5580-1 1 Blue
pockets. 5580-15 1½ Olive
• All weights are filled with smooth non- 5580-2 2 White
absorptive steel pellets for comfort.
5580-25 2½ Red
• Hugger® weights are hygienically sealed in
individual plastic protective packages. 5580-3 3 Gold Model 5581 (not shown)
• Hugger® weights are sold individually or 5580-4 4 Turquoise Set of 16 Hugger ® Weights
in sets. Consists of: (2) each of 1 lb., 11 ⁄ 2 lb., 2 lb.,
5580-5 5 Black 2 1 ⁄ 2 lb., 3 lb., 4 lb., 5 lb. and (1) each of
#5580–75 5580-6 6 Tan 7 1 ⁄ 2 lb. and 10 lb.
5580-7 7 Blue MODEL TYPE
5580-75 7½ Orange 5581 Set of (16) Hugger® Weights
5580-8 8 Tan
5580-9 9 Green Model 5588 (not shown)
Set of 5 Hugger ® Weights
5580-10 10 Brown
Consists of: (1) each of 1 lb., 2 lb., 3 lb.,
5580-12 12 Black 4 lb., and 5 lb.
Each weight is factory sealed.
5580-150 15 Black MODEL TYPE
All weights are sold individually or in sets. 5580-200 20 Tan 5588 Set of (5) Hugger® Weights
Vinyl Coated Dumbbells A. Model 5505
MODEL LBS. COLOR Sold as sets or individually
5510-V 1 Pink
5511-V 2 Aqua
5512-V 3 Plum
5513-V 4 Grape
5514-V 5 Teal-Green
5515-V 6 Burnt Orange
5516-V 7 Bluish Green
5517-V 8 Burgundy
5518-V 9 Blue
5519-V 10 Ebony Black Weight is embossed on each end
Model 5502 (not shown) Model 5503 (not shown) A. Model 5505
Set of 6 Vinyl Dumbbells Set of 5 Vinyl Dumbbells Set of 10 Vinyl Dumbbells
MODEL CONSISTS OF MODEL CONSISTS OF MODEL CONSISTS OF
5502 (2) each 1 lb. through 3 lb. 5503 (1) each 1 lb. through 5 lb. 5505 (1) each 1 lb. through 10 lb.
46
12. THERAPY AND REHAB EQUIPMENT
A. Model 5555 B. Model 5555-100
C. Model 5576
All weights, dumbbells and bands
must be ordered as accessories.
A. Model 5555 C. Model 5576
Economy Wall Dumbbell Rack Dumbbell Wagon
• Black powder coated metal wire rack attaches • Oak laminate finish on all surfaces.
easily to any wall. • Upper 34 1⁄2 ” x 22 1⁄2 ” tray work surface accom-
• (10) hooks are graduated in size to hold 1 to modates up to (20) various size Dumbbells.
10 lb. vinyl coated Dumbbells. • Lower storage shelf with vertical divider.
• Can store weights and accessories.
MODEL HEIGHT WIDTH DEPTH
• 3” diameter heavy duty casters.
5555 53 ¼” 10” 3½” MODEL LENGTH WIDTH HEIGHT
5576 39” 24” 32”
B. Model 5555-100 Model 5576-100
Accessorized Wall Dumbbell Rack Accessorized Dumbbell Wagon
MODEL CONSISTS OF MODEL CONSISTS OF
5555-100 (1) 5555 rack, (1) 5505 set 5576-100 5576 with (2) 5505 sets
of (10) Dumbbells of (10) Dumbbells each
D. Model 5541 E. Model 5545
Model 5539 (not shown) D. Model 5541 E. Model 5545
Set of 3 Exercise Weight Bars Set of 5 Exercise Weight Bars “Soft-Ball” Weights, Set of 6
• A series of 1 to 3 lb. easy-to-grip color-coded • A series of 1 to 5 lb. easy-to-grip color-coded • Each 5” ball can be gripped with one hand.
36” long weighted bars. 36” long weighted bars. • PVC exterior, anti-slip, color-coded, inflatable
• Ideal for geriatric and nursing home use. • Ideal for rehabilitation exercise activity. with sealed weight pellets.
• Features built-in Hanger end cap on one end • Features built-in Hanger end cap on one end
and Anti-Roll end cap on other end. and Anti-Roll end cap on other end. MODEL CONSISTS OF
MODEL CONSISTS OF MODEL CONSISTS OF 5545 (1) each 1.1 lbs., 2.2 lbs., 3.3 lbs.,
5539 (1) each 1 lb., 2 lbs., 3 lbs. 5541 (1) each 1 lb., 2 lbs., 3 lbs., 4 lbs, 5 lbs. 4.4 lbs, 5.5 lbs., and 6.6 lbs.
47
13. WEIGHT RACKS
A. Model 5570
B. Model 5565 Front view Model 5565 Reverse view
A. Model 5570 All weights and dumbbells shown must be ordered as accessories
Weight Rack
• Almond coated pegboard on both front and
back side. B. Model 5565 Model 5565-100
• Natural Oak laminate base and frame. “Combo” Weight/ Accessorized Combo Rack
• Includes (11) pegboard safety hooks. Dumbbell Mobile Rack MODEL CONSISTS OF
• 2” diameter swiveling easy-rolling casters. FEATURES: 5565-100 5565 Rack, (1) 5581 Set of (16)
MODEL WIDTH DEPTH HEIGHT • Almond pegboard panel on front of rack for Hugger® Weights, (2) 5505 Sets of
storage of optional Hugger® Weights, includes (10) Dumbbells each
5570 24” 18” 57” (11) hooks.
• Black laminate panel on back equipped with Model 5571
Model 5570-100 hooks for (20) dumbbells. Pegboard Hooks
Accessorized Weight Rack • Oak laminate frame & base. • Set of (11) additional Pegboard Hooks with
• 3” diameter swiveling, easy-rolling casters. ball tip ends for safety.
MODEL CONSISTS OF
5570-100 (1) 5570 rack, (1) 5581 Set of MODEL WIDTH DEPTH HEIGHT MODEL LENGTH QUANTITY
(16) Hugger® Weights 5565 24” 18” 57” 5571 4” 11
Model 5531 Model 5531
Common Features Set of (5) REP Bands™
LATEX-FREE RESISTIVE EXERCISE BANDS: Consists of the following:
LEVEL COLOR
Extra-Light Peach
• For multi-functional exercise use.
• Bands are 50 yds. long x 4” wide. Light Orange
Supplied in dispensing box. Medium Green
• Available in (5) color-coded resistance Heavy Blue
levels. Extra-Heavy Plum
• Non-slip, non-latex elastomer.
• No powder, no odor.
• Use this clinically tested allergen-free
safer alternative.
48
14. THERAPY AND REHAB EQUIPMENT
Common Features
COMBINATION WEIGHT RACKS —
MODELS 5560, 5569:
• Almond coated pegboard on front of
rack for (16) optional Hugger® weights.
• (11) pegboard safety hooks. Full View
• (10) dumbbell hooks on left side and Posture
(10) hooks on right side (total of 20 Mirror
▲
hooks). Dumbbells are optional.
• Durable Black laminate finish.
• Base plate has bumper “T” molding on
all four sides.
• 3” diameter swiveling, easy-rolling
casters.
A. Model 5560
Multi-Purpose Combination Rack
SPECIAL FEATURES:
• Built-in dispensers for #5531 set of (5) REP
Bands™ (see page 48). Includes scissors.
• Full view distortion-free glass mirror with ANSI
“shatter stop” safety backing.
MODEL WIDTH DEPTH HEIGHT Model 5560
A. Model 5560
5560 30” 18” 72” Front view Reverse view
Model 5560-100
Accessorized Multi- All weights, dumbbells and bands must be ordered as accessories.
Purpose Combination Rack
MODEL CONSISTS OF
B. Model 5569 Front view Model 5569 Reverse view
5560-100 (1) 5560 Rack, (1) 5581 Set of
(16) Hugger® Weights, (1) 5531 Set
of (5) REP Bands™, (2) 5505 Sets
of (10) dumbbells each
B. Model 5569
Multi-Purpose Weight/
Storage Rack
SPECIAL FEATURES:
• Two-door storage cabinet with lock.
• Doors have 165° self-closing Euro-hinges.
• (2) adjustable shelves and (1) fixed shelf.
MODEL WIDTH DEPTH HEIGHT
5569 30” 24” 61”
Model 5569-100
Accessorized Weight/
Storage Rack
MODEL CONSISTS OF
5569-100 (1) 5569 Rack, (1) 5581 Set
of (16) Hugger® Weights,
(2) 5505 Sets of (10)
dumbbells each
(REP Resistive Exercise Bands™ must be
ordered as optional accessory. See page 48).
49
15. 4-SIDED WEIGHT RACKS
A. Model Model B. Model Model
5557 5557 5566 5566
Front Reverse Front Reverse
view view view view
A. Model 5557 B. Model 5566 Model 5566-100
Rotating Weight Rack Econo Weight Rack Accessorized Rack
• Rotates 360° for ease of use. • Pegboard with (11) hooks for Hugger® Weights. MODEL CONSISTS OF
• Built-in dispensers for (5) REP Bands™. • (20) Dumbbell hooks on reverse side of rack. 5566-100 (1) 5566 Rack, (1) 5581 Set of (16)
• Hooks for (20) Dumbbells. • Built-in dispensers for (5) REP Bands™. Hugger® Weights, (2) 5505 Sets of
• Pegboard with (6) hooks for weights. • Built-in compartment for Weight Bars. (10) each 1 to 10 lb. dumbbells,
• Stationary base plate has T-molding. • Black laminate finish. Base plate has T-molding. (1) Set of 5531 Set of (5) REP™
MODEL WIDTH DEPTH HEIGHT • (4) 3” diameter swiveling casters. Bands, (1) 5539 Set of (3) Weight
Bars (1 lb, 2 lb, 3 lb)
5557 20” 20” 55” MODEL LENGTH DEPTH HEIGHT
5566 30” 18” 59½”
Model 5557-100 Accessorized Rack
MODEL CONSISTS OF
5557-100 (1) 5557 Rack, (2) Sets of 5588 Hugger® All weights and dumbbells shown
Weights, (2) 5505 Sets of (10) Dumbbells must be ordered as accessories
each, (1) 5531 Set of (5) REP Bands™
C. Model 5592
Compact Weight Rack
• Pegboard with (11) hooks for Hugger®
Weights.
• Built-in dispensers for (5) REP Bands™.
• Hooks to hold (20) Dumbbells.
• Storage compartment for Weight Bars.
C. Model Model • Laminate shelves with (3) plastic Storage Tubs.
5592 5592 • Black laminate finish. Base plate has T-molding.
Front Reverse
• (4) 3” diameter swiveling casters.
view view
MODEL LENGTH DEPTH HEIGHT
5592 32” 24” 68”
Model 5592-100
Accessorized Rack
MODEL CONSISTS OF
5592-100 (1) 5592 Rack, (1) 5581 Set of (16)
Hugger® Weights, (2) 5505 Sets of
(10) Dumbbells each, (1) 5531 Set of
(5) REP Bands™, (1) 5541 Set of
(5) Weight Bars, (1) 5545 Set of (6)
50 “Soft-Ball” Hand Weights
16. THERAPY AND REHAB EQUIPMENT
Common Features
WEIGHT RACKS – MODELS 5562, 5563:
• Durable Black laminate finish with
Oak laminate Door and Drawer fronts.
• Almond coated Pegboard with (11) Safety
Hooks for Hugger® Weights.
• Hooks for (20) Dumbbells.
• 3 sets of hooks for optional Weight Bars.
• Built-in dispensers for optional REP Bands™.
• Full view distortion-free glass mirror with
ANSI “shatter stop” safety backing.
• 32” x 32” Base Plate has bumper
T-molding on all 4 sides.
• 4” dia. twin-wheel, locking casters.
A. Model 5562
Mega-Rack
FEATURES:
• Convenient Drop Lid work counter with lock.
• (3) 8” high laminate Drawers on nylon rollers.
• Built-in dispenser for VELCRO® brand rolls
(VELCRO® not included).
MODEL LENGTH WIDTH HEIGHT
5562 32” 32” 72”
A. Model 5562 Model 5562
Model 5562-100 Front view Reverse view
Accessorized Rack All weights and dumbbells shown must be ordered as accessories
MODEL CONSISTS OF
5562-100 (1) 5562 Mega-Rack, (1) 5581 Set
of (16) Hugger® Weights, (1) 5531
Set of (5) REP Bands™, (2) 5505
Sets of (10) Dumbbells ea., (1) 5539
Set of (3) Weight Bars
B. Model 5563
“Grand Stand” Storage/
Weight Rack
FEATURES:
• Full height 15” wide Oak laminate Door
with lock and self-closing Euro-hinges.
• Laminate cupboard with (5) adjustable
laminate shelves.
• 3” high wire basket at top of rack holds
miscellaneous supply items.
MODEL LENGTH WIDTH HEIGHT
5563 32” 32” 72”*
*75” Including Wire Basket
Model 5563-100
Accessorized Rack
MODEL CONSISTS OF
5563-100 (1) 5563 Rack, (1) 5581 Set of
(16) Hugger® Weights, (1) 5531 Set
of (5) REP Bands™, (2) 5505 Sets of
(10) Dumbbells ea., (1) 5539 Set of B. Model 5563 Model 5563
(3) Weight Bars
Front view Reverse view
51
17. MIRRORS, RACKS AND CABINETS
A. Model 5559
Combo Weight Rack
& Triple Mirror
FEATURES:
• Two 12” wide black laminate hinged Doors
open to reveal full-height Triple Mirror with
ANSI safety backing.
• Built-in dispensers for REP Bands™.
• Almond pegboard on front for Hugger®
Weights. (11) Pegboard safety hooks.
• (10) Dumbbell hooks on left side and (10)
hooks on right side.
• Black laminate. Base plate has T-molding.
• 3” Diameter swiveling, twin-wheel, casters.
MODEL WIDTH DEPTH HEIGHT
5559 30” 22” 72”
Model 5559-100 Accessorized Rack
MODEL CONSISTS OF
5559-100 (1) 5559 Rack, (1) 5581 Set of (16)
Hugger Weights, (1) 5531 Set of (5)
REP Bands™, (2) 5505 Sets of (10)
A. Model 5559 Model 5559
Dumbbells each Front view Reverse view, mirrored doors open
B. Model 5591 Model 5591-100 C. Model S-410
Mirrored Storage Cabinet Accessorized Cabinet Econo Mirror
FEATURES: MODEL CONSISTS OF • Full-view glass mirror with ANSI safety backing.
• Hinged Oak laminate Door with full-view, • Gray laminate with (4) 2 1⁄2 ” casters.
5591-100 (1) 5591 Cabinet with accessories:
glass mirror with ANSI safety backing. (1) 5581 Set of (16) Hugger®
MODEL WIDTH DEPTH HEIGHT
• (2) laminate storage shelves. Weights, (2) 5505 Sets of (10) S-410 24” 18” 70”
• Pegboard back with (11) hooks for Weights. Dumbbells each
• Hooks for (20) Dumbbells. D. Model S-420
• Cabinet must be secured to wall. Econo Mirror Rack
Wall fasteners not included. All weights and dumbbells shown must be • Same as S-410 but with Pegboard back and
MODEL WIDTH DEPTH HEIGHT ordered as accessories (11) hooks.
5591 25” 15” 76” MODEL WIDTH DEPTH HEIGHT
S-420 24” 18” 70”
B. Model 5591 Model 5591 C. Model S-410 D. Model S-420
52 Closed Open Front View Reverse view
18. THERAPY AND REHAB EQUIPMENT
A. Model B. Model
1670 C. Model
1671 1672
A. Model 1670 B. Model 1671 C. Model 1672
Portable Triple Mirror Portable Single Mirror Wall Mounted Mirror
• (3) high quality, distortion-free, full view glass • High quality, distortion-free glass mirror with • High quality, full view, distortion-free glass
mirrors with ANSI safety backing. ANSI “shatter-stop” safety backing. mirror w/ANSI “shatter-stop”safety backing.
• Oak laminate frame and finished back. • Oak laminate frame and base. • Oak laminate frame.
• Mounted on 2” diameter swiveling casters. • Finished oak laminate back. • Equipped with mounting cleat for attachment
• Viewing angles are easily changed and • Mounted on easy rolling 2” diameter to wall.
locked in desired position. Each mirrored swiveling casters. • Mirror frame measures 66” x 24”. Can be
panel is 24” wide. • Mirror height provides full body image. mounted 6” above floor so that overall height
is 72”.
MODEL HEIGHT WIDTH DEPTH MODEL HEIGHT WIDTH DEPTH MODEL HEIGHT WIDTH DEPTH
1670 69” 60”(open) 24”(open) 1671 70” 24” 18” 1672 66” 24” 4”
A. Model 1675
“Combo” Portable
Mirror/Weight Rack
FEATURES:
• High quality, full view, distortion-free glass
A. Model 1675
mirror with ANSI safety backing.
Combination • Reverse side has almond coated pegboard
Unit panel for optional Hugger® weights.
• Includes (11) pegboard safety hooks.
• Oak laminate frame and base.
• Easy rolling 2” dia. swiveling casters.
MODEL HEIGHT WIDTH DEPTH
1675 70” 24” 18”
Model 1675-100
Accessorized Mirror/Weight Rack
MODEL CONSISTS OF:
1675-100 (1) 1675 Rack, (1) 5581 Set
of (16) Hugger® Weights
Weights must be ordered
Front View Reverse view
as accessories
53