This document provides precautions and instructions for servicing various components of Nissan vehicles, including the supplemental restraint system, fuel system, hoses, oils, and air conditioning system. It explains how to use the service manual, read wiring diagrams, check connectors and terminals, and perform efficient electrical diagnosis. Guidelines are also provided for lifting points, battery replacement, and the Consult-II diagnostic system.
2005 Nissan Armada Service Repair Manual.pdfjjkdmsmmd
This document provides general information and precautions for servicing a 2005 Nissan Armada. It outlines safety procedures for working with airbags, immobilizers, catalytic converters, fuels, hoses, oils and more. The document also explains how to use the service manual, read wiring diagrams, diagnose electrical issues, and replace the nickel metal hydride battery. Technicians are instructed to thoroughly read this section to ensure their safety and proper vehicle repair.
2005 Nissan Titan Service Repair Manual.pdffusjekmdjdud3e
- This section provides important safety precautions and instructions for working on Nissan vehicles, including those related to the supplemental restraint system (SRS), fuel system, hoses, oils, health, environment, and air conditioning.
- It describes how to use the service manual through explanations of terms, units, contents, components, symbols and diagrams. Procedures for electrical diagnosis and control unit installation are also included.
- Lifting points, towing methods, torque specifications, recommended chemicals, vehicle identification information, dimensions and terminology are defined. Checking the CONSULT-II diagnostic system is also outlined.
BELT PRE-TENSIONER” EAS001D2
The Supplemental
2005 Nissan Titan Service Repair Manual.pdfjjkdmsmmd
- This section provides important safety precautions and instructions for working on Nissan vehicles, including those related to the supplemental restraint system (SRS), fuel system, hoses, oils, health, environment, and air conditioning.
- It describes how to use the service manual through explanations of terms, units, contents, components, symbols and diagrams. Procedures for electrical diagnosis and control unit installation are also included.
- Lifting points, towing methods, torque specifications, recommended chemicals, vehicle identification information, dimensions and terminology are defined. Checking the CONSULT-II diagnostic system is also outlined.
BELT PRE-TENSIONER” EAS001D2
The Supplemental
2005 Nissan Titan Service Repair Manual.pdff8usjekdkdmmd
- This document provides precautions and instructions for servicing various vehicle systems correctly and safely, such as the supplemental restraint system, fuel system, emissions equipment, and more.
- It introduces the symbols and conventions used in the service manual to identify components, procedures, and measurements.
- The manual explains how to interpret wiring diagrams, component locations, test procedures and use special service tools to efficiently diagnose and repair issues.
2005 Nissan Titan Service Repair Manual.pdff8usejdkddmmd
- This section provides important safety precautions and instructions for working on Nissan vehicles, including those related to the supplemental restraint system (SRS), fuel system, hoses, oils, health, environment, and air conditioning.
- It describes how to use the service manual through explanations of terms, units, contents, components, symbols and diagrams. Procedures for electrical diagnosis and control unit installation are also included.
- Lifting points, towing methods, torque specifications, recommended chemicals, vehicle identification information, dimensions and terminology are defined. Checking the CONSULT-II diagnostic system is also outlined.
BELT PRE-TENSIONER” EAS001D2
The Supplemental
2005 Nissan Titan Service Repair Manual.pdffusejdkdmmd
- This section provides important safety precautions and instructions for working on Nissan vehicles, including those related to the supplemental restraint system (SRS), fuel system, hoses, oils, health, environment, and air conditioning.
- It describes how to use the service manual through explanations of terms, units, contents, components, symbols and diagrams. Procedures for electrical diagnosis and control unit installation are also included.
- Lifting points, towing methods, torque specifications, recommended chemicals, vehicle identification information, dimensions and terminology are defined. Checking the CONSULT-II diagnostic system is also outlined.
BELT PRE-TENSIONER” EAS001D2
The Supplemental
2005 Nissan Titan Service Repair Manual.pdff8suejjdkddmmd
- This section provides important safety precautions and instructions for working on Nissan vehicles, including those related to the supplemental restraint system (SRS), fuel system, hoses, oils, health, environment, and air conditioning.
- It describes how to use the service manual through explanations of terms, units, contents, components, symbols and diagrams. Procedures for electrical diagnosis and control unit installation are also included.
- Lifting points, towing methods, torque specifications, recommended chemicals, vehicle identification information, dimensions and terminology are defined. Checking the CONSULT-II diagnostic system is also outlined.
BELT PRE-TENSIONER” EAS001D2
The Supplemental
2006 Nissan Titan Service Repair Manual.pdff8usjekdkdmmd
This document provides precautions and instructions for servicing a 2006 Nissan Titan. It outlines safety procedures for working with airbags, fuel systems, oils and other components. The manual describes how to use symbols and diagrams to properly diagnose issues. Technicians are instructed to thoroughly read and understand precautions before beginning any repair tasks.
2005 Nissan Armada Service Repair Manual.pdfjjkdmsmmd
This document provides general information and precautions for servicing a 2005 Nissan Armada. It outlines safety procedures for working with airbags, immobilizers, catalytic converters, fuels, hoses, oils and more. The document also explains how to use the service manual, read wiring diagrams, diagnose electrical issues, and replace the nickel metal hydride battery. Technicians are instructed to thoroughly read this section to ensure their safety and proper vehicle repair.
2005 Nissan Titan Service Repair Manual.pdffusjekmdjdud3e
- This section provides important safety precautions and instructions for working on Nissan vehicles, including those related to the supplemental restraint system (SRS), fuel system, hoses, oils, health, environment, and air conditioning.
- It describes how to use the service manual through explanations of terms, units, contents, components, symbols and diagrams. Procedures for electrical diagnosis and control unit installation are also included.
- Lifting points, towing methods, torque specifications, recommended chemicals, vehicle identification information, dimensions and terminology are defined. Checking the CONSULT-II diagnostic system is also outlined.
BELT PRE-TENSIONER” EAS001D2
The Supplemental
2005 Nissan Titan Service Repair Manual.pdfjjkdmsmmd
- This section provides important safety precautions and instructions for working on Nissan vehicles, including those related to the supplemental restraint system (SRS), fuel system, hoses, oils, health, environment, and air conditioning.
- It describes how to use the service manual through explanations of terms, units, contents, components, symbols and diagrams. Procedures for electrical diagnosis and control unit installation are also included.
- Lifting points, towing methods, torque specifications, recommended chemicals, vehicle identification information, dimensions and terminology are defined. Checking the CONSULT-II diagnostic system is also outlined.
BELT PRE-TENSIONER” EAS001D2
The Supplemental
2005 Nissan Titan Service Repair Manual.pdff8usjekdkdmmd
- This document provides precautions and instructions for servicing various vehicle systems correctly and safely, such as the supplemental restraint system, fuel system, emissions equipment, and more.
- It introduces the symbols and conventions used in the service manual to identify components, procedures, and measurements.
- The manual explains how to interpret wiring diagrams, component locations, test procedures and use special service tools to efficiently diagnose and repair issues.
2005 Nissan Titan Service Repair Manual.pdff8usejdkddmmd
- This section provides important safety precautions and instructions for working on Nissan vehicles, including those related to the supplemental restraint system (SRS), fuel system, hoses, oils, health, environment, and air conditioning.
- It describes how to use the service manual through explanations of terms, units, contents, components, symbols and diagrams. Procedures for electrical diagnosis and control unit installation are also included.
- Lifting points, towing methods, torque specifications, recommended chemicals, vehicle identification information, dimensions and terminology are defined. Checking the CONSULT-II diagnostic system is also outlined.
BELT PRE-TENSIONER” EAS001D2
The Supplemental
2005 Nissan Titan Service Repair Manual.pdffusejdkdmmd
- This section provides important safety precautions and instructions for working on Nissan vehicles, including those related to the supplemental restraint system (SRS), fuel system, hoses, oils, health, environment, and air conditioning.
- It describes how to use the service manual through explanations of terms, units, contents, components, symbols and diagrams. Procedures for electrical diagnosis and control unit installation are also included.
- Lifting points, towing methods, torque specifications, recommended chemicals, vehicle identification information, dimensions and terminology are defined. Checking the CONSULT-II diagnostic system is also outlined.
BELT PRE-TENSIONER” EAS001D2
The Supplemental
2005 Nissan Titan Service Repair Manual.pdff8suejjdkddmmd
- This section provides important safety precautions and instructions for working on Nissan vehicles, including those related to the supplemental restraint system (SRS), fuel system, hoses, oils, health, environment, and air conditioning.
- It describes how to use the service manual through explanations of terms, units, contents, components, symbols and diagrams. Procedures for electrical diagnosis and control unit installation are also included.
- Lifting points, towing methods, torque specifications, recommended chemicals, vehicle identification information, dimensions and terminology are defined. Checking the CONSULT-II diagnostic system is also outlined.
BELT PRE-TENSIONER” EAS001D2
The Supplemental
2006 Nissan Titan Service Repair Manual.pdff8usjekdkdmmd
This document provides precautions and instructions for servicing a 2006 Nissan Titan. It outlines safety procedures for working with airbags, fuel systems, oils and other components. The manual describes how to use symbols and diagrams to properly diagnose issues. Technicians are instructed to thoroughly read and understand precautions before beginning any repair tasks.
2006 Nissan Titan Service Repair Manual.pdffusjekmdjdud3e
This document provides precautions and instructions for servicing a 2006 Nissan Titan vehicle. It outlines safety procedures for working with airbags, fuel systems, oils and other components. The manual describes how to use symbols and follow troubleshooting test groups. Technicians are instructed to thoroughly read and understand precautions before starting any repair tasks.
2006 Nissan Titan Service Repair Manual.pdff8usejdkddmmd
This document provides precautions and instructions for servicing a 2006 Nissan Titan vehicle. It outlines safety procedures for working with airbags, fuel systems, oils and other components. The manual describes how to use symbols and follow troubleshooting test groups. Technicians are instructed to thoroughly read and understand precautions before starting any repair tasks.
2006 Nissan Titan Service Repair Manual.pdfjjkdmsmmd
- This section provides important safety precautions and instructions for servicing various vehicle systems including the supplemental restraint system, immobilizer system, fuel system, engine control system, hoses, oils, and air conditioning.
- It also describes how to use the service manual including terms, contents, symbols, and reading wiring diagrams. Procedures for electrical diagnosis, recommended products/sealants, vehicle identification, dimensions, and terminology are also included.
- Lifting procedures and towing instructions are provided to safely lift and transport the vehicle. Tightening torques for standard bolts and a control unit checking system are also outlined.
2006 Nissan Titan Service Repair Manual.pdffjksekmmdm
This document provides precautions and instructions for servicing a 2006 Nissan Titan vehicle. It outlines safety procedures for working with airbags, fuel systems, oils and other components. The manual describes how to use symbols and follow troubleshooting test groups. Technicians are instructed to thoroughly read and understand precautions before starting any repair tasks.
2006 Nissan Titan Service Repair Manual.pdff8suejjdkddmmd
This document provides precautions and instructions for servicing a 2006 Nissan Titan vehicle. It outlines safety procedures for working with airbags, fuel systems, oils and other components. The manual describes how to use symbols and follow troubleshooting test groups. Technicians are instructed to thoroughly read and understand precautions before starting any repair tasks.
This is the Highly Detailed factory service repair manual for the2007 NISSAN PATHFINDER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.2007 NISSAN PATHFINDER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
* General Information
* Engine Mechanical
* Engine Lubrication System
* Engine Cooling System
* Engine Control System
* Fuel System
* Exhaust System
* Accelerator Control System
* Automatic Transmission
* Transfer
* Propeller Shaft
* Front Final Drive
* Rear Final Drive
* Front Axle
* Rear Axle
* Front Suspension
* Rear Suspension
* Road Wheels & Tires
* Brake System
* Parking Brake System
* Brake Control System
* Power Steering System
* Seat Belts
* Supplemental Restraint System (SRS)
* Body, Lock & Security System
* Glasses, Window System & Mirrors
* Roof
* Exterior & Interior
* Instrument Panel
* Seat
* Adjustable Pedal
* Automatic Air Conditioner
* Manual Air Conditioner
* Starting & Charging System
* Lighting System
* Driver Information System
* Wiper, Washer & Horn
* Body Control System
* LAN System
* Audio Visual, Navigation & Telephone System
* Auto Cruise Control System
* Power Supply, Ground & Circuit Elements
* Maintenance
* Alphabetical Index
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have2007 NISSAN PATHFINDER Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
2007 Nissan Titan Service Repair Manual.pdff8suejjdkddmmd
- The document provides an index and overview of information for servicing a 2007 Nissan Titan, including sections on general precautions, specifications, identification, terminology, and more.
- Precautions are listed for working with airbags, vehicle security systems, fuel and emissions systems, hoses, oils, and more to ensure safety during repairs.
- The document describes how to use the service manual, read wiring diagrams, perform electrical diagnosis, and check terminals and connectors. Lifting points, towing procedures, torque specs, recommended fluids, and other reference information is also included.
2007 Nissan Titan Service Repair Manual.pdfjjkdmsmmd
- The document provides an index and overview of information for servicing a 2007 Nissan Titan, including safety precautions, vehicle identification, specifications and more.
- Technicians must read all safety precautions thoroughly before starting any repair work to ensure their safety and proper vehicle functioning.
- Special precautions are outlined for working with airbags, vehicle security systems, fuel and emissions control components.
- Sections cover maintenance procedures, electrical diagnosis, vehicle lifting points, towing and more. Reference tables list component specifications and tightening torques.
2007 Nissan Titan Service Repair Manual.pdff8usjekdkdmmd
- The document provides an index and overview of information for servicing a 2007 Nissan Titan, including safety precautions, vehicle identification, specifications and more.
- Technicians must read all safety precautions thoroughly before starting any repair work to ensure their safety and proper vehicle functioning.
- Special precautions are outlined for working with airbags, vehicle security systems, fuel and emissions control components.
- Sections cover maintenance procedures, electrical diagnosis, vehicle lifting points, towing and more. Reference tables list tightening torques, recommended fluids, dimensions and terminology.
2007 Nissan Titan Service Repair Manual.pdffusjekmdjdud3e
- The document provides an index and overview of information for servicing a 2007 Nissan Titan, including sections on general precautions, specifications, identification, terminology, and more.
- Precautions are listed for working with airbags, vehicle security systems, fuel and emissions systems, hoses, oils, and more to ensure safety during repairs.
- The document describes how to use the service manual, read wiring diagrams, perform electrical diagnosis, and identifies replacement parts and chemicals.
2007 Nissan Titan Service Repair Manual.pdff8usejdkddmmd
This document provides precautions and instructions for servicing various vehicle systems on a 2007 Nissan Titan. It outlines safety procedures for working with airbags, fuel systems, hoses, oils and other components. The document also explains how to use the service manual, including following troubleshooting diagnostics, understanding symbols and finding component locations based on illustrations. Proper safety protocols are emphasized to protect both technicians and vehicle functionality.
2007 Nissan Titan Service Repair Manual.pdffjksekmmdm
- The document provides an index and overview of information for servicing a 2007 Nissan Titan, including sections on general precautions, specifications, capacities, identification, dimensions, and terminology.
- Precautions are described for working with airbags, vehicle security systems, fuel systems, emissions equipment, and other components.
- The document explains how to use the service manual, read wiring diagrams, perform electrical diagnosis, and identifies replacement parts and recommended products.
2005 infiniti qx56 service repair manualfskkkdjskemd
This document provides precautions and general information for servicing a 2005 Infiniti QX56, including:
- Precautions for supplemental restraint systems, vehicle immobilizers, three-way catalysts, fuels, and hoses.
- How to use the service manual terms, contents, symbols, and wiring diagrams.
- How to perform efficient electrical diagnosis, including incident simulation tests and circuit inspection.
- Information on the CONSULT-II diagnostic system, lifting points, towing, and standard bolt tightening torques.
2007 INFINITI QX56 Service Repair Manual.pdfxqpa81165737
This document provides a quick reference index and service information for the 2007 INFINITI QX56. It includes charts with specifications for the engine, transmission, drivetrain, suspension, brakes, refill capacities, and more. The document emphasizes safety precautions when working on the vehicle and explains how to use the service manual, including definitions of terms, units of measurement, how to read diagrams, and abbreviations. Technicians are instructed to thoroughly understand precautions before starting any repair work.
2006 INFINITI G35 SEDAN Service Repair Manual.pdfpwck778415
This document provides a quick reference guide and safety precautions for working on a 2006 INFINITI G35. It includes specifications such as engine tune-up data, front and rear wheel alignment specifications, brake specifications, and refill capacities. The document emphasizes safety precautions that must be followed when working with airbags, the vehicle immobilizer system, fuel systems, hoses, oils, and air conditioning. It also provides an overview of how to use the service manual, including an explanation of terms, units, components, symbols, and how to follow wiring diagrams.
2006 infiniti g35 sedan service repair manualolfjsekdmmes
- This manual provides maintenance and repair procedures for the 2006 INFINITI G35. It is important to thoroughly read and understand the precautions in the GI section before starting any repair tasks.
- Special precautions must be followed when working with the supplemental restraint system (SRS) "air bag" and "seat belt pre-tensioners" due to the risk of accidental deployment and potential for serious injury.
- The NISSAN/INFINITI vehicle immobilizer system (NATS) must be dealt with properly to prevent the engine from malfunctioning or failing to start.
- Take care when working with the fuel, cooling, and emissions control systems, following all precautions for the multiport fuel
2008 nissan armada service repair manualfjjskdmnenemm
This document provides a quick reference index and specifications for the 2008 Nissan Armada, including:
- Engine specifications and valve timing data
- Front and rear wheel alignment specifications for different suspension configurations
- Brake specifications and pedal height measurements
- Fluid capacities for fuel, engine oil, transmission fluid, and other vehicle systems
- Tire sizes and wheel arch height measurements
The document aims to serve as a concise technical reference for maintenance and repair of the 2008 Nissan Armada.
2009 Nissan Armada Service Repair Manual.pdfjjkdmsmmd
This document provides a quick reference index and specifications for the 2009 Nissan Armada, including:
- Engine specifications such as bore, stroke, compression ratio.
- Front and rear wheel alignment specifications.
- Brake specifications for the front and rear brakes.
- Fluid capacities for fuel, engine oil, transmission fluid, and other fluids.
The document is intended to provide technicians with essential technical information and specifications to service the 2009 Nissan Armada in an efficient and safe manner. It includes specifications for major vehicle systems from the engine to brakes to ensure repairs and maintenance are performed correctly.
2005 Nissan Frontier Service Repair Manual.pdffusjekmdjdud3e
The document provides a quick reference chart for the 2005 Nissan Frontier that includes specifications, capacities, and repair limits for the engine, transmission, driveline, suspension, brakes, electrical components, and other vehicle systems. The chart is organized alphabetically and includes sections on the engine, transmission, driveline, suspension, brakes, restraint systems, body components, air conditioning, electrical systems, and maintenance. Precautions for working on the vehicle and using the service manual are also described.
2005 Nissan Frontier Service Repair Manual.pdff8usjekdkdmmd
The document provides a quick reference chart for the 2005 Nissan Frontier that includes specifications, capacities, and repair limits for the engine, transmission, driveline, suspension, brakes, electrical components, and other vehicle systems. The chart is organized alphabetically and includes sections on the engine, transmission, driveline, suspension, brakes, restraint systems, body components, air conditioning, electrical systems, and maintenance. Precautions for working on the vehicle and using the service manual are also described.
Mitsubishi FGC25HP Forklift Trucks (Engine) Service Repair Manual.pdfufjjskekdmdm3e
The document is a short message thanking the reader for reading and directing them to click a link for more information. It consists of a thank you message followed by instructions to click a link in order to obtain additional details.
Mitsubishi FGC20K HO Forklift Trucks Service Repair Manual SN AF82E-90011-UP.pdfufjjskekdmdm3e
This document provides general information about Mitsubishi forklift trucks, including:
- Models of 1-ton to 3-ton trucks covered by the manual and their identifying codes
- Locations of serial numbers on trucks
- Dimensional specifications and technical data for standard truck models
- Descriptions of vehicle exteriors, engine mounting locations, and mast/transmission serial numbers
More Related Content
Similar to 2004 Nissan Armada Service Repair Manual.pdf
2006 Nissan Titan Service Repair Manual.pdffusjekmdjdud3e
This document provides precautions and instructions for servicing a 2006 Nissan Titan vehicle. It outlines safety procedures for working with airbags, fuel systems, oils and other components. The manual describes how to use symbols and follow troubleshooting test groups. Technicians are instructed to thoroughly read and understand precautions before starting any repair tasks.
2006 Nissan Titan Service Repair Manual.pdff8usejdkddmmd
This document provides precautions and instructions for servicing a 2006 Nissan Titan vehicle. It outlines safety procedures for working with airbags, fuel systems, oils and other components. The manual describes how to use symbols and follow troubleshooting test groups. Technicians are instructed to thoroughly read and understand precautions before starting any repair tasks.
2006 Nissan Titan Service Repair Manual.pdfjjkdmsmmd
- This section provides important safety precautions and instructions for servicing various vehicle systems including the supplemental restraint system, immobilizer system, fuel system, engine control system, hoses, oils, and air conditioning.
- It also describes how to use the service manual including terms, contents, symbols, and reading wiring diagrams. Procedures for electrical diagnosis, recommended products/sealants, vehicle identification, dimensions, and terminology are also included.
- Lifting procedures and towing instructions are provided to safely lift and transport the vehicle. Tightening torques for standard bolts and a control unit checking system are also outlined.
2006 Nissan Titan Service Repair Manual.pdffjksekmmdm
This document provides precautions and instructions for servicing a 2006 Nissan Titan vehicle. It outlines safety procedures for working with airbags, fuel systems, oils and other components. The manual describes how to use symbols and follow troubleshooting test groups. Technicians are instructed to thoroughly read and understand precautions before starting any repair tasks.
2006 Nissan Titan Service Repair Manual.pdff8suejjdkddmmd
This document provides precautions and instructions for servicing a 2006 Nissan Titan vehicle. It outlines safety procedures for working with airbags, fuel systems, oils and other components. The manual describes how to use symbols and follow troubleshooting test groups. Technicians are instructed to thoroughly read and understand precautions before starting any repair tasks.
This is the Highly Detailed factory service repair manual for the2007 NISSAN PATHFINDER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.2007 NISSAN PATHFINDER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
* General Information
* Engine Mechanical
* Engine Lubrication System
* Engine Cooling System
* Engine Control System
* Fuel System
* Exhaust System
* Accelerator Control System
* Automatic Transmission
* Transfer
* Propeller Shaft
* Front Final Drive
* Rear Final Drive
* Front Axle
* Rear Axle
* Front Suspension
* Rear Suspension
* Road Wheels & Tires
* Brake System
* Parking Brake System
* Brake Control System
* Power Steering System
* Seat Belts
* Supplemental Restraint System (SRS)
* Body, Lock & Security System
* Glasses, Window System & Mirrors
* Roof
* Exterior & Interior
* Instrument Panel
* Seat
* Adjustable Pedal
* Automatic Air Conditioner
* Manual Air Conditioner
* Starting & Charging System
* Lighting System
* Driver Information System
* Wiper, Washer & Horn
* Body Control System
* LAN System
* Audio Visual, Navigation & Telephone System
* Auto Cruise Control System
* Power Supply, Ground & Circuit Elements
* Maintenance
* Alphabetical Index
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have2007 NISSAN PATHFINDER Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
2007 Nissan Titan Service Repair Manual.pdff8suejjdkddmmd
- The document provides an index and overview of information for servicing a 2007 Nissan Titan, including sections on general precautions, specifications, identification, terminology, and more.
- Precautions are listed for working with airbags, vehicle security systems, fuel and emissions systems, hoses, oils, and more to ensure safety during repairs.
- The document describes how to use the service manual, read wiring diagrams, perform electrical diagnosis, and check terminals and connectors. Lifting points, towing procedures, torque specs, recommended fluids, and other reference information is also included.
2007 Nissan Titan Service Repair Manual.pdfjjkdmsmmd
- The document provides an index and overview of information for servicing a 2007 Nissan Titan, including safety precautions, vehicle identification, specifications and more.
- Technicians must read all safety precautions thoroughly before starting any repair work to ensure their safety and proper vehicle functioning.
- Special precautions are outlined for working with airbags, vehicle security systems, fuel and emissions control components.
- Sections cover maintenance procedures, electrical diagnosis, vehicle lifting points, towing and more. Reference tables list component specifications and tightening torques.
2007 Nissan Titan Service Repair Manual.pdff8usjekdkdmmd
- The document provides an index and overview of information for servicing a 2007 Nissan Titan, including safety precautions, vehicle identification, specifications and more.
- Technicians must read all safety precautions thoroughly before starting any repair work to ensure their safety and proper vehicle functioning.
- Special precautions are outlined for working with airbags, vehicle security systems, fuel and emissions control components.
- Sections cover maintenance procedures, electrical diagnosis, vehicle lifting points, towing and more. Reference tables list tightening torques, recommended fluids, dimensions and terminology.
2007 Nissan Titan Service Repair Manual.pdffusjekmdjdud3e
- The document provides an index and overview of information for servicing a 2007 Nissan Titan, including sections on general precautions, specifications, identification, terminology, and more.
- Precautions are listed for working with airbags, vehicle security systems, fuel and emissions systems, hoses, oils, and more to ensure safety during repairs.
- The document describes how to use the service manual, read wiring diagrams, perform electrical diagnosis, and identifies replacement parts and chemicals.
2007 Nissan Titan Service Repair Manual.pdff8usejdkddmmd
This document provides precautions and instructions for servicing various vehicle systems on a 2007 Nissan Titan. It outlines safety procedures for working with airbags, fuel systems, hoses, oils and other components. The document also explains how to use the service manual, including following troubleshooting diagnostics, understanding symbols and finding component locations based on illustrations. Proper safety protocols are emphasized to protect both technicians and vehicle functionality.
2007 Nissan Titan Service Repair Manual.pdffjksekmmdm
- The document provides an index and overview of information for servicing a 2007 Nissan Titan, including sections on general precautions, specifications, capacities, identification, dimensions, and terminology.
- Precautions are described for working with airbags, vehicle security systems, fuel systems, emissions equipment, and other components.
- The document explains how to use the service manual, read wiring diagrams, perform electrical diagnosis, and identifies replacement parts and recommended products.
2005 infiniti qx56 service repair manualfskkkdjskemd
This document provides precautions and general information for servicing a 2005 Infiniti QX56, including:
- Precautions for supplemental restraint systems, vehicle immobilizers, three-way catalysts, fuels, and hoses.
- How to use the service manual terms, contents, symbols, and wiring diagrams.
- How to perform efficient electrical diagnosis, including incident simulation tests and circuit inspection.
- Information on the CONSULT-II diagnostic system, lifting points, towing, and standard bolt tightening torques.
2007 INFINITI QX56 Service Repair Manual.pdfxqpa81165737
This document provides a quick reference index and service information for the 2007 INFINITI QX56. It includes charts with specifications for the engine, transmission, drivetrain, suspension, brakes, refill capacities, and more. The document emphasizes safety precautions when working on the vehicle and explains how to use the service manual, including definitions of terms, units of measurement, how to read diagrams, and abbreviations. Technicians are instructed to thoroughly understand precautions before starting any repair work.
2006 INFINITI G35 SEDAN Service Repair Manual.pdfpwck778415
This document provides a quick reference guide and safety precautions for working on a 2006 INFINITI G35. It includes specifications such as engine tune-up data, front and rear wheel alignment specifications, brake specifications, and refill capacities. The document emphasizes safety precautions that must be followed when working with airbags, the vehicle immobilizer system, fuel systems, hoses, oils, and air conditioning. It also provides an overview of how to use the service manual, including an explanation of terms, units, components, symbols, and how to follow wiring diagrams.
2006 infiniti g35 sedan service repair manualolfjsekdmmes
- This manual provides maintenance and repair procedures for the 2006 INFINITI G35. It is important to thoroughly read and understand the precautions in the GI section before starting any repair tasks.
- Special precautions must be followed when working with the supplemental restraint system (SRS) "air bag" and "seat belt pre-tensioners" due to the risk of accidental deployment and potential for serious injury.
- The NISSAN/INFINITI vehicle immobilizer system (NATS) must be dealt with properly to prevent the engine from malfunctioning or failing to start.
- Take care when working with the fuel, cooling, and emissions control systems, following all precautions for the multiport fuel
2008 nissan armada service repair manualfjjskdmnenemm
This document provides a quick reference index and specifications for the 2008 Nissan Armada, including:
- Engine specifications and valve timing data
- Front and rear wheel alignment specifications for different suspension configurations
- Brake specifications and pedal height measurements
- Fluid capacities for fuel, engine oil, transmission fluid, and other vehicle systems
- Tire sizes and wheel arch height measurements
The document aims to serve as a concise technical reference for maintenance and repair of the 2008 Nissan Armada.
2009 Nissan Armada Service Repair Manual.pdfjjkdmsmmd
This document provides a quick reference index and specifications for the 2009 Nissan Armada, including:
- Engine specifications such as bore, stroke, compression ratio.
- Front and rear wheel alignment specifications.
- Brake specifications for the front and rear brakes.
- Fluid capacities for fuel, engine oil, transmission fluid, and other fluids.
The document is intended to provide technicians with essential technical information and specifications to service the 2009 Nissan Armada in an efficient and safe manner. It includes specifications for major vehicle systems from the engine to brakes to ensure repairs and maintenance are performed correctly.
2005 Nissan Frontier Service Repair Manual.pdffusjekmdjdud3e
The document provides a quick reference chart for the 2005 Nissan Frontier that includes specifications, capacities, and repair limits for the engine, transmission, driveline, suspension, brakes, electrical components, and other vehicle systems. The chart is organized alphabetically and includes sections on the engine, transmission, driveline, suspension, brakes, restraint systems, body components, air conditioning, electrical systems, and maintenance. Precautions for working on the vehicle and using the service manual are also described.
2005 Nissan Frontier Service Repair Manual.pdff8usjekdkdmmd
The document provides a quick reference chart for the 2005 Nissan Frontier that includes specifications, capacities, and repair limits for the engine, transmission, driveline, suspension, brakes, electrical components, and other vehicle systems. The chart is organized alphabetically and includes sections on the engine, transmission, driveline, suspension, brakes, restraint systems, body components, air conditioning, electrical systems, and maintenance. Precautions for working on the vehicle and using the service manual are also described.
Similar to 2004 Nissan Armada Service Repair Manual.pdf (20)
Mitsubishi FGC25HP Forklift Trucks (Engine) Service Repair Manual.pdfufjjskekdmdm3e
The document is a short message thanking the reader for reading and directing them to click a link for more information. It consists of a thank you message followed by instructions to click a link in order to obtain additional details.
Mitsubishi FGC20K HO Forklift Trucks Service Repair Manual SN AF82E-90011-UP.pdfufjjskekdmdm3e
This document provides general information about Mitsubishi forklift trucks, including:
- Models of 1-ton to 3-ton trucks covered by the manual and their identifying codes
- Locations of serial numbers on trucks
- Dimensional specifications and technical data for standard truck models
- Descriptions of vehicle exteriors, engine mounting locations, and mast/transmission serial numbers
Bobcat TL360(X) Telescopic Handler Service Repair Manual SN AVMD11001 AND Abo...ufjjskekdmdm3e
The document promotes clicking a link to get more information. In a single short paragraph, it thanks the reader for reading and prompts them to click a link for additional details. The summary focuses on the key points of thanking the reader and directing them to click a link.
Mitsubishi FGC18 Forklift Trucks (Engine) Service Repair Manual.pdfufjjskekdmdm3e
The document encourages the reader to click a link for more information after thanking them for reading. It provides a brief message asking the reader to click a link without providing many other details.
Mitsubishi FGC20 Forklift Trucks (Engine) Service Repair Manual.pdfufjjskekdmdm3e
The document provides a brief thank you message for reading and includes a request to click a link for more information on a topic. In a single sentence, it expresses gratitude to the reader and prompts them to follow a link for additional details.
2005 Cadillac Xlr Service Repair Manual.pdfufjjskekdmdm3e
This document provides specifications and diagrams for the 2005 Cadillac XLR steering wheel and column. It includes fastener tightening specifications, schematics of the column and ignition lock, and diagrams showing components and their locations. Diagnostic information is also provided, listing starting points for diagnosis and scan tool outputs related to the steering column.
Mitsubishi FG30 Forklift Trucks Service Repair Manual SN F13D-40128.pdfufjjskekdmdm3e
The document encourages the reader to click a link for more information after thanking them for reading. It provides a brief message asking the reader to click a link without providing many other details.
2008 Yamaha YZFR1000XR Service Repair Manual.pdfufjjskekdmdm3e
This document provides an overview of the Yamaha YZFR1W motorcycle, including:
- The vehicle identification number and model label are used to identify the motorcycle.
- The motorcycle uses an electronically controlled fuel injection system to precisely control air-fuel ratio.
- It has features like the YCC-T throttle control system and YCC-I intake control system to optimize power delivery.
- The multi-function meter unit displays information like speed, rpm, temperature and has settings like the clock.
2008 Can-Am BRP Bombardier Outlander 500XT Service Repair Manual.pdfufjjskekdmdm3e
This short document encourages the reader to click a link for more information after thanking them for reading. It asks the reader to click a link and provides no other context or details about the topic.
Mitsubishi FG35A Forklift Trucks Service Repair Manual SN F13D-60044.pdfufjjskekdmdm3e
The document promotes clicking a link to get more information. In a concise 3 sentences, it asks the reader to thank them for reading and then click a link for additional details.
2004 Toyota Solara Service Repair Manual.pdfufjjskekdmdm3e
This document provides guidelines for repairing body panels on Toyota vehicles. It discusses proper work procedures and precautions to take when repairing body structures. Specifically, it states that heat repair methods should not be used on body structure panels as it can reduce strength. It also indicates that any part with a kink or sharp deformation should be replaced rather than repaired. Impact beams must also be replaced if damaged rather than repaired due to their critical safety function in collisions. Proper measurement should also be taken before any removal or cutting occurs to ensure correct replacement of parts.
2005 Buick Century Service Repair Manual.pdfufjjskekdmdm3e
The document encourages the reader to thank them for reading and then provides a link for the reader to click in order to get more information on a topic. It keeps the summary very brief in only mentioning the key points of thanking the reader and directing them to a link for additional details.
Mitsubishi FG20 Forklift Trucks Service Repair Manual SN F17B-10646.pdfufjjskekdmdm3e
The document promotes clicking a link to get more information. In a concise 3 sentences, it asks the reader to thank them for reading and then click a link for additional details.
Bobcat TL360(X) Telescopic Handler Service Repair Manual SN AVM911001 AND Abo...ufjjskekdmdm3e
The document encourages the reader to click a link for more information after thanking them for reading. It provides a brief message asking the reader to click a link without providing many other details.
Daihatsu F300 (HD-Engine) Service Repair Manual.pdfufjjskekdmdm3e
The document provides a brief thank you message for reading and includes a request to click a link for more information on a topic. It keeps the summary short and focused on the key points without included unnecessary details.
Mitsubishi FGC25K Forklift Trucks Service Repair Manual SN AF82E-00011-UP.pdfufjjskekdmdm3e
This document provides general information about Mitsubishi forklift trucks, including:
- Models of 1-ton to 3-ton trucks covered by the manual and their identifying codes
- Locations of serial numbers on trucks
- Dimensional specifications and technical data for standard truck models
- Exterior views of trucks showing measurements
Mitsubishi FG35 Forklift Trucks Service Repair Manual.pdfufjjskekdmdm3e
The document provides a brief thank you message for reading and includes a request to click a link for more information on a topic. In a single sentence, it expresses gratitude to the reader and prompts them to follow a link for additional details.
Mitsubishi FGC25K Forklift Trucks Service Repair Manual SN AF82D-00011-UP.pdfufjjskekdmdm3e
This document provides general information about Mitsubishi forklift trucks, including:
- Models of 1-ton to 3-ton trucks covered by the manual and their identifying codes
- Locations of serial numbers on trucks
- Dimensional specifications and measurements of trucks
- Technical specifications including rated capacities, lift speeds, tilt angles, and other data
Mitsubishi FGC15 Forklift Trucks (Engine) Service Repair Manual.pdfufjjskekdmdm3e
The document provides a brief thank you message for reading and includes a request to click a link for more information on a topic. In a single sentence, it thanks the reader for their time and prompts them to follow a link for additional details.
Mitsubishi FG35A Forklift Trucks Service Repair Manual SN F13D-50271-UP.pdfufjjskekdmdm3e
The document promotes clicking a link to get more information. In a concise 3 sentences, it asks the reader to thank them for reading and then click a link for additional details.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
2. -2
FOREWORD
This manual contains maintenance and repair procedures for the
2004 NISSAN PATHFINDER ARMADA.
In order to assure your safety and the efficient functioning of the vehicle,
this manual should be read thoroughly. It is especially important that the
PRECAUTIONS in the GI section be completely understood before starting
any repair task.
All information in this manual is based on the latest product information
at the time of publication. The right is reserved to make changes in specifi-
cations and methods at any time without notice.
IMPORTANT SAFETY NOTICE
The proper performance of service is essential for both the safety of
the technician and the efficient functioning of the vehicle.
The service methods in this Service Manual are described in such a
manner that the service may be performed safely and accurately.
Service varies with the procedures used, the skills of the technician
and the tools and parts available. Accordingly, anyone using service
procedures, tools or parts which are not specifically recommended
by NISSAN must first be completely satisfied that neither personal
safety nor the vehicle’s safety will be jeopardized by the service
method selected.
3. QUICK REFERENCE CHART PATHFINDER ARMADA 2004
QUICK REFERENCE CHART PATHFINDER ARMADA PFP:00000
Engine Tune-Up Data ELS000YK
Engine Specifications
Drive Belt Deflection and Tension
Spark Plugs (Double Platinum Tipped)
Cylinder arrangement V-8
Displacement 5,552 cm3
(338.80 in3
)
Bore and stroke 98 x 92 mm (3.86 x 3.62 in)
Valve arrangement DOHC
Firing order 1-8-7-3-6-5-4-2
Number of piston rings
Compression 2
Oil 1
Number of main bearings 5
Compression ratio 9.8:1
Compression pressure
Standard 1,520 kPa (15.5 kg/cm2
, 220 psi) / 200
rpm
Minimum 1,324 kPa (13.5 kg/cm2 , 192 psi) / 200
rpm
Differential limit between cylinders 98 kPa (1.0 kg/cm2
, 14 psi) / 300 rpm
Cylinder number
Valve timing
Unit: degree
a b c d e f
232° 230° 2° 48° 3° 49°
Tension of drive belts Auto adjustment by auto tensioner
Make NGK
Standard type PLFR5A-11
Hot type PLFR4A-11
SEM957C
PBIC0187E
4. 2004
QUICK REFERENCE CHART PATHFINDER ARMADA
Front Wheel Alignment (Unladen*1
) ELS00112
*1: Fuel, radiator coolant and engine oil full. Spare tire, jack, hand tools and mats in designated positions.
*2: Target value 37° 30′ (37.50°)
*3: Target value 33° 58′ (33.97°)
*4: Target value 37° 56′ (37.93°)
*5: Target value 34° 01′ (34.02°)
Cold type PLFR6A-11
Gap (nominal) 1.1 mm (0.043 in)
Drive type 4x2 4x4
Camber
Degree minute (decimal degree)
Minimum -0° 51′ (-0.85°) -0° 34′ (-0.57°)
Nominal -0° 6′ (-0.10°) 0° 11′ (0.18°)
Maximum 0° 39′ (0.65°) 0° 56′ (0.93°)
Cross camber 0° 45′ (0.75°) or less 0° 45′ (0.75°) or less
Caster
Degree minute (decimal degree)
Minimum
Standard 2° 43′ (2.72°) 2° 18′ (2.30°)
Air leveling 3° 7′ (3.12°) 2° 41′ (2.68°)
Nominal
Standard 3° 28′ (3.47°) 3° 3′ (3.05°)
Air leveling 3° 52′ (3.87°) 3° 26′ (3.43°)
Maximum
Standard 4° 13′ (4.22°) 3° 48′ (3.80°)
Air leveling 4° 37′ (4.62°) 4° 11′ (4.18°)
Cross caster 0° 45′ (0.75°) or less 0° 45′ (0.75°) or less
Kingpin inclination
Degree minute (decimal degree)
13° 32′ (13.53°) 13° 13′ (13.22°)
Total toe-in
Distance (A − B)
Minimum 1.8 mm (0.07 in) 1.8 mm (0.07 in)
Nominal 2.8 mm (0.11 in) 2.8 mm (0.11 in)
Maximum 3.8 mm (0.15 in) 3.8 mm (0.15 in)
Angle (left plus right)
Degree minute (Decimal degree)
Minimum 0° 3′ (0.05°) 0° 3′ (0.05°)
Nominal 0° 5′ (0.8°) 0° 5′ (0.8°)
Maximum 0° 7′ (0.12°) 0° 7′ (0.12°)
Wheel turning angle (full
turn)
Inside
Degree minute (Decimal degree)
34° 30′ – 38° 30′ *2
(34.50° – 38.50°)
34° 56′ – 38° 56′ *4
(34.93° – 38.93°)
Outside
Degree minute (Decimal degree)
30° 58′ – 34° 58′ *3
(30.97° – 34.97°)
31° 01′ – 35° 01′ *5
(31.02° – 35.02°)
SFA234AC
5. QUICK REFERENCE CHART PATHFINDER ARMADA
2004
Rear Wheel Alignment (Unladen*1
) ELS000ZS
*1: Fuel tank, engine coolant and engine oil full. Spare tire, jack, hand tools and mats in designated positions.
Brake ELS000ZT
Unit: mm (in)
Applied model Without air leveling With air leveling
Camber
Degree minute (decimal degree)
Minimum -0° 25′ (0.4°) -1° 0′ (-1°)
Nominal 0° 5′ (0.1°) -0° 30′ (-0.5°)
Maximum 0° 35′ (0.6°) 0° 0′ (0°)
Cross camber 0° 45' (0.75°) or less
Total toe-in
Distance (A - B)
Minimum - 2.4 mm (0.094 in) 0 mm (0 in)
Nominal 0.9 mm (0.035 in) 3.3 mm (0.130 in)
Maximum 4.2 mm (0.165 in) 6.6 mm (0.260 in)
Cross toe 2 mm (0.079 in) or less
Angle (left plus right)
Degree minute (decimal degree)
Minimum -0° 5' (-0.8°) 0° 0' (0°)
Nominal 0° 2' (0.03°) 0° 7' (0.11°)
Maximum 0° 9' (0.14°) 0° 14' (0.22°)
Cross toe 0° 8' (0.14°) or less
SFA234AC
Front brake
Brake model CLZ31VC
Rotor outer diameter × thickness 320 × 26 (12.60 × 1.02)
Pad Length × width × thickness 111.0 × 73.5 × 9.5 (4.73 × 2.894 × 0.374)
Cylinder bore diameter 51 (2.01)
Rear brake
Brake model AD14VE
Rotor outer diameter × thickness 320 × 14 (12.60 × 0.55)
Pad Length × width × thickness 83.0 × 33.0 × 8.5 (3.268 × 1.299 × 0.335)
Cylinder bore diameter 48 (1.89)
Control valve Valve model Electric brake force distribution
Brake booster
Booster model C215T
Diaphragm diameter 215 (8.46)
Recommended brake fluid
Genuine NISSAN Heavy Duty Brake Fluid or equivalent DOT 3
(US FMVSS No. 116)
6. 2004
QUICK REFERENCE CHART PATHFINDER ARMADA
Disc Brake - Repair Limits ELS000ZU
Unit: mm (in)
Brake Pedal ELS000ZV
Refill Capacities ELS000YO
Brake model CLZ31VC (Front) AD14VE (Rear)
Brake Pad
Standard thickness (new) 11.88 (0.468) 12.13 (0.478)
Repair limit thickness 1.0 (0.039) 1.0 (0.039)
Disc rotor
Standard thickness (new) 26.0 (1.024) 14.0 (0.551)
Repair limit thickness 24.5 (0.965) 12.0 (0.472)
Maximum uneven wear (measured at 8 positions) 0.015 (0.0006) 0.015 (0.0006)
Runout limit (with it attached to the vehicle) 0.04 (0.0016) 0.05 (0.0020)
Brake pedal height (from dash panel top surface) 182.3 − 192.3 mm (7.18 − 7.57 in)
Depressed pedal height [under a force of 490 N (50 kg, 110 lb)
with engine running]
More than 90.3 mm (3.55 in)
Clearance between stopper rubber and the threaded end of stop
lamp switch
0.74 − 1.96 mm (0.029 − 0.077 in)
Pedal play 3 − 11 mm (0.12 − 0.43 in)
Description
Capacity (Approximate)
Metric US measure Imp measure
Fuel 105.8 28 gal 23 1/4 gal
Engine oil
Drain and refill
With oil filter change 6.2 6 1/2 qt 5 1/2 qt
Without oil filter change 5.9 6 1/4 qt 5 1/4 qt
Dry engine (engine overhaul) 7.6 8 qt 6 3/4 qt
Cooling system With reservoir at MAX level 14.4 3 3/4 gal 3 1/8 gal
Automatic transmission fluid (ATF) 10.6 11 1/4 qt 9 3/8 qt
Rear final drive oil 1.75 3 3/4 pt 3 1/8 pt
Transfer fluid 3.0 3 1/8 qt 2 5/8 qt
Front final drive oil 1.6 3 3/8 pt 2 7/8 pt
Power steering fluid (PSF) 1.0 2 1/8 pt 1 3/4 pt
Windshield washer fluid 4.5 1 1/4 gal 1 gal
Air conditioning system refrigerant 1.08 ± 0.05 kg 2.38 ± 0.11 lb 2.38 ± 0.11 lb
Air conditioning system lubricant 290 m 9.8 fl oz 10.2 fl oz
7. GI-1
GENERAL INFORMATION
A GENERAL INFORMATION
CONTENTS
C
D
E
F
G
H
I
J
K
L
M
B
GI
SECTION
Revision: January 2005 2004 Pathfinder Armada
PRECAUTIONS .....................................................
..... 3
Description ..........................................................
..... 3
Precautions for Supplemental Restraint System
(SRS) “AIR BAG” and “SEAT BELT PRE-TEN-
SIONER” .............................................................
..... 3
General Precautions ...........................................
..... 3
Precautions for Three Way Catalyst ....................
..... 5
Precautions for Fuel (Unleaded Regular Gasoline
Recommended) ...................................................
..... 5
Precautions for Multiport Fuel Injection System or
Engine Control System .......................................
..... 5
Precautions for Hoses .........................................
..... 5
HOSE REMOVAL AND INSTALLATION ..........
..... 5
HOSE CLAMPING ...........................................
..... 6
Precautions for Engine Oils .................................
..... 6
HEALTH PROTECTION PRECAUTIONS ........
..... 6
ENVIRONMENTAL PROTECTION PRECAU-
TIONS ..............................................................
..... 7
Precautions for Air Conditioning ..........................
..... 7
HOW TO USE THIS MANUAL ..............................
..... 8
Description ..........................................................
..... 8
Terms ..................................................................
..... 8
Units ....................................................................
..... 8
Contents ..............................................................
..... 8
Components ........................................................
..... 8
SYMBOLS ........................................................
..... 9
How to Follow Trouble Diagnoses .......................
..... 9
DESCRIPTION .................................................
... 10
HOW TO FOLLOW TEST GROUPS IN TROU-
BLE DIAGNOSES ............................................
....11
HARNESS WIRE COLOR AND CONNECTOR
NUMBER INDICATION ....................................
....11
KEY TO SYMBOLS SIGNIFYING MEASURE-
MENTS OR PROCEDURES ............................
... 13
How to Read Wiring Diagrams ............................
... 15
CONNECTOR SYMBOLS ................................
... 15
SAMPLE/WIRING DIAGRAM - EXAMPL - ......
... 16
DESCRIPTION .................................................
... 17
Abbreviations ......................................................
... 22
SERVICEINFORMATIONFORELECTRICALINCI-
DENT ......................................................................
... 24
How to Check Terminal ........................................
... 24
CONNECTOR AND TERMINAL PIN KIT .........
... 24
HOW TO PROBE CONNECTORS ...................
... 24
Howto Perform Efficient Diagnosis foran Electrical
Incident ................................................................
... 27
WORK FLOW ...................................................
... 27
INCIDENT SIMULATION TESTS .....................
... 27
CIRCUIT INSPECTION ....................................
... 30
Control Units and Electrical Parts ........................
... 35
PRECAUTIONS ...............................................
... 35
SMJ INSTALLATION ........................................
... 36
CONSULT-II CHECKING SYSTEM .......................
... 37
Description ...........................................................
... 37
Function and System Application ........................
... 37
Nickel Metal Hydride Battery Replacement .........
... 37
Checking Equipment ...........................................
... 37
CONSULT-II Start Procedure ...............................
... 38
CONSULT-II Data Link Connector (DLC) Circuit .
... 38
INSPECTION PROCEDURE ...........................
... 38
LIFTING POINT ......................................................
... 40
Pantograph Jack ..................................................
... 40
Garage Jack and Safety Stand ............................
... 40
2-Pole Lift ............................................................
... 41
TOW TRUCK TOWING ..........................................
... 42
Tow Truck Towing ................................................
... 42
4X2 MODEL .....................................................
... 42
4X4 MODEL .....................................................
... 43
Vehicle Recovery (Freeing a stuck vehicle) .........
... 43
TIGHTENING TORQUE OF STANDARD BOLTS .
... 44
Tightening Torque Table ......................................
... 44
RECOMMENDED CHEMICAL PRODUCTS AND
SEALANTS ............................................................
... 45
Recommended Chemical Products and Sealants... 45
IDENTIFICATION INFORMATION .........................
... 46
Model Variation ....................................................
... 46
Identification Number ...........................................
... 47
VEHICLE IDENTIFICATION NUMBER
ARRANGEMENT .............................................
... 47
ENGINE SERIAL NUMBER .............................
... 48
8. GI-2
Revision: January 2005 2004 Pathfinder Armada
TRANSFER SERIAL NUMBER ........................
... 48
AUTOMATIC TRANSMISSION NUMBER ........
... 48
Dimensions ..........................................................
... 49
Wheels & Tires ....................................................
... 49
TERMINOLOGY .....................................................
...50
SAE J1930 Terminology List ................................
...50
9. PRECAUTIONS
GI-3
C
D
E
F
G
H
I
J
K
L
M
B
GI
Revision: January 2005 2004 Pathfinder Armada
PRECAUTIONS PFP:00001
Description EAS0010V
Observe the following precautions to ensure safe and proper servicing. These precautions are not
described in each individual section.
Precautions for Supplemental Restraint System (SRS) “AIR BAG” and “SEAT
BELT PRE-TENSIONER” EAS0011Z
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SRS and SB section of this Service Man-
ual.
WARNING:
● To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be per-
formed by an authorized NISSAN/INFINITI dealer.
● Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the SRS section.
● Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or
harness connectors.
General Precautions EAS0010W
● Do not operate the engine for an extended period of time without
proper exhaust ventilation.
Keep the work area well ventilated and free of any inflammable
materials. Special care should be taken when handling any
inflammable or poisonous materials, such as gasoline, refriger-
ant gas, etc. When working in a pit or other enclosed area, be
sure to properly ventilate the area before working with hazard-
ous materials.
Do not smoke while working on the vehicle.
● Before jacking up the vehicle, apply wheel chocks or other tire
blocks to the wheels to prevent the vehicle from moving. After
jacking up the vehicle, support the vehicle weight with safety
stands at the points designated for proper lifting before working
on the vehicle.
These operations should be done on a level surface.
● When removing a heavy component such as the engine or tran-
saxle/transmission, be careful not to lose your balance and drop
them. Also, do not allow them to strike adjacent parts, especially
the brake tubes and master cylinder.
SGI285
SGI231
10. GI-4
PRECAUTIONS
Revision: January 2005 2004 Pathfinder Armada
● Before starting repairs which do not require battery power:
Turn off ignition switch.
Disconnect the negative battery terminal.
● If the battery terminals are disconnected, recorded memory of
radio and each control unit is erased.
● To prevent serious burns:
Avoid contact with hot metal parts.
Do not remove the radiator cap when the engine is hot.
● Dispose of drained oil or the solvent used for cleaning parts in
an appropriate manner.
● Do not attempt to top off the fuel tank after the fuel pump nozzle
shuts off automatically.
Continued refueling may cause fuel overflow, resulting in fuel
spray and possibly a fire.
● Clean all disassembled parts in the designated liquid or solvent
prior to inspection or assembly.
● Replace oil seals, gaskets, packings, O-rings, locking washers, cotter pins, self-locking nuts, etc. with new
ones.
● Replace inner and outer races of tapered roller bearings and needle bearings as a set.
● Arrange the disassembled parts in accordance with their assembled locations and sequence.
● Do not touch the terminals of electrical components which use microcomputers (such as ECM).
Static electricity may damage internal electronic components.
● After disconnecting vacuum or air hoses, attach a tag to indicate the proper connection.
● Use only the fluids and lubricants specified in this manual.
● Use approved bonding agent, sealants or their equivalents when required.
● Use hand tools, power tools (disassembly only) and recom-
mended special tools where specified for safe and efficient ser-
vice repairs.
● When repairing the fuel, oil, water, vacuum or exhaust systems,
check all affected lines for leaks.
● Before servicing the vehicle:
Protect fenders, upholstery and carpeting with appropriate cov-
ers.
Take caution that keys, buckles or buttons do not scratch paint.
SEF289H
SGI233
PBIC0190E
SGI234
11. PRECAUTIONS
GI-5
C
D
E
F
G
H
I
J
K
L
M
B
GI
Revision: January 2005 2004 Pathfinder Armada
WARNING:
To prevent ECM from storing the diagnostic trouble codes, do not carelessly disconnect the harness
connectors which are related to the engine control system and TCM (transmission control module)
system. The connectors should be disconnected only when working according to the WORK FLOW of
TROUBLE DIAGNOSES in EC and AT sections.
Precautions for Three Way Catalyst EAS0010X
If a large amount of unburned fuel flows into the catalyst, the catalyst temperature will be excessively high. To
prevent this, follow the instructions.
● Use unleaded gasoline only. Leaded gasoline will seriously damage the three way catalyst.
● When checking for ignition spark or measuring engine compression, make tests quickly and only when
necessary.
● Do not run engine when the fuel tank level is low, otherwise the engine may misfire, causing damage to
the catalyst.
Do not place the vehicle on flammable material. Keep flammable material off the exhaust pipe and the three
way catalyst.
Precautions for Fuel (Unleaded Regular Gasoline Recommended) EAS0010Y
Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) number (Research
octane number 91).
CAUTION:
Do not use leaded gasoline. Using leaded gasoline will damage the three way catalyst. Using a fuel
other than that specified could adversely affect the emission control devices and systems, and could
also affect the warranty coverage validity.
Precautions for Multiport Fuel Injection System or Engine Control System EAS00110
● Before connecting or disconnecting any harness connector for
the multiport fuel injection system or ECM:
Turn ignition switch to “OFF” position.
Disconnect negative battery terminal.
Otherwise, there may be damage to ECM.
● Before disconnecting pressurized fuel line from fuel pump to
injectors, be sure to release fuel pressure.
● Be careful not to jar components such as ECM and mass air
flow sensor.
Precautions for Hoses EAS00111
HOSE REMOVAL AND INSTALLATION
● To prevent damage to rubber hose, do not pry off rubber hose
with tapered tool or screwdriver.
SGI787
SMA019D
12. GI-6
PRECAUTIONS
Revision: January 2005 2004 Pathfinder Armada
● To reinstall the rubber hose securely, make sure of hose inser-
tion length and clamp orientation. (If tube is equipped with hose
stopper, insert rubber hose into tube until it butts up against
hose stopper.)
HOSE CLAMPING
● If old rubber hose is re-used, install hose clamp in its original
position (at the indentation where the old clamp was). If there is
a trace of tube bulging left on the old rubber hose, align rubber
hose at that position.
● Discard old clamps; replace with new ones.
● After installing leaf spring clamps, apply force to them in the
direction of the arrow, tightening rubber hose equally all around.
Precautions for Engine Oils EAS00112
Prolonged and repeated contact with used engine oil may cause skin cancer. Try to avoid direct skin contact
with used oil.
If skin contact is made, wash thoroughly with soap or hand cleaner as soon as possible.
HEALTH PROTECTION PRECAUTIONS
● Avoid prolonged and repeated contact with oils, particularly used engine oils.
● Wear protective clothing, including impervious gloves where practicable.
● Do not put oily rags in pockets.
● Avoid contaminating clothes, particularly underpants, with oil.
● Heavily soiled clothing and oil-impregnated footwear should not be worn. Overalls must be cleaned regu-
larly.
● First aid treatment should be obtained immediately for open cuts and wounds.
● Use barrier creams, applying them before each work period, to help the removal of oil from the skin.
● Wash with soap and water to ensure all oil is removed (skin cleansers and nail brushes will help). Prepa-
rations containing lanolin replace the natural skin oils which have been removed.
● Do not use gasoline, kerosene, diesel fuel, gas oil, thinners or solvents for cleaning skin.
● If skin disorders develop, obtain medical advice without delay.
● Where practical, degrease components prior to handling.
SMA020D
SMA021D
SMA022D
13. PRECAUTIONS
GI-7
C
D
E
F
G
H
I
J
K
L
M
B
GI
Revision: January 2005 2004 Pathfinder Armada
● Where there is a risk of eye contact, eye protection should be worn, for example, chemical goggles or face
shields; in addition an eye wash facility should be provided.
ENVIRONMENTAL PROTECTION PRECAUTIONS
Dispose of used oil and used oil filters through authorized waste disposal contractors to licensed waste dis-
posal sites, or to the waste oil reclamation trade. If in doubt, contact the local authority for advice on disposal
facilities.
It is illegal to pour used oil on to the ground, down sewers or drains, or into water sources.
The regulations concerning pollution vary between regions.
Precautions for Air Conditioning EAS00113
Use an approved refrigerant recovery unit any time the air conditioning system must be discharged. Refer to
ATC-160, "HFC-134a (R-134a) Service Procedure" for specific instructions.
14. GI-8
HOW TO USE THIS MANUAL
Revision: January 2005 2004 Pathfinder Armada
HOW TO USE THIS MANUAL PFP:00008
Description EAS00114
This volume explains “Removal, Disassembly, Installation, Inspection and Adjustment” and “Trouble Diag-
noses”.
Terms EAS00115
● The captions WARNING and CAUTION warn you of steps that must be followed to prevent personal
injury and/or damage to some part of the vehicle.
WARNING indicates the possibility of personal injury if instructions are not followed.
CAUTION indicates the possibility of component damage if instructions are not followed.
BOLD TYPED STATEMENTS except WARNING and CAUTION give you helpful information.
Standard value:Tolerance at inspection and adjustment.
Limit value:The maximum or minimum limit value that should not be exceeded at inspection and adjust-
ment.
Units EAS00116
● The UNITS given in this manual are primarily expressed as the SI UNIT (International System of Unit),
and alternatively expressed in the metric system and in the yard/pound system.
“Example”
Contents EAS00117
● ALPHABETICAL INDEX is provided at the end of this manual so that you can rapidly find the item and
page you are searching for.
● A QUICK REFERENCE INDEX, a black tab (e.g. ) is provided on the first page. You can quickly find
the first page of each section by matching it to the section's black tab.
● THE CONTENTS are listed on the first page of each section.
● THE TITLE is indicated on the upper portion of each page and shows the part or system.
● THE PAGE NUMBER of each section consists of two or three letters which designate the particular sec-
tion and a number (e.g. “BR-5”).
● THE SMALL ILLUSTRATIONS show the important steps such as inspection, use of special tools, knacks
of work and hidden or tricky steps which are not shown in the previous large illustrations.
Assembly, inspection and adjustment procedures for the complicated units such as the automatic tran-
saxle or transmission, etc. are presented in a step-by-step format where necessary.
Components EAS0011X
● THE LARGE ILLUSTRATIONS are exploded views (See the following) and contain tightening torques,
lubrication points, section number of the PARTS CATALOG (e.g. SEC. 440) and other information neces-
sary to perform repairs.
The illustrations should be used in reference to service matters only. When ordering parts, refer to the
appropriate PARTS CATALOG .
Outer Socket Lock Nut : 59 - 78 N-m (6.0 - 8.0 kg-m, 43 - 58 ft-lb)
15. HOW TO USE THIS MANUAL
GI-9
C
D
E
F
G
H
I
J
K
L
M
B
GI
Revision: January 2005 2004 Pathfinder Armada
Components shown in an illustration may be identified by a circled number. When this style of illustration
is used, the text description of the components will follow the illustration.
SYMBOLS
How to Follow Trouble Diagnoses EAS00118
NOTICE:
Trouble diagnoses indicates work procedures required to diagnose problems effectively. Observe the following
instructions before diagnosing.
1. Before performing trouble diagnoses, read the “Preliminary Check”, the “Symptom Chart” or the
“Work Flow”.
SAIA0399E
SYMBOL DESCRIPTION
Tightening torque
The tightening torque specifications of bolts and nuts may be presented as either a range or a standard tightening
torque.
Should be lubricated with grease. Unless otherwise indicated, use recommended multi-purpose grease.
Should be lubricated with oil.
Sealing point
Checking point
Always replace after every disassembly.
P
Apply petroleum jelly.
Apply ATF.
Select with proper thickness.
Adjustment is required.
16. GI-10
HOW TO USE THIS MANUAL
Revision: January 2005 2004 Pathfinder Armada
2. After repairs, re-check that the problem has been completely eliminated.
3. Refer to Component Parts and Harness Connector Location for the Systems described in each
section for identification/location of components and harness connectors.
4. Refer to the Circuit Diagram for quick pinpoint check.
If you need to check circuit continuity between harness connectors in more detail, such as when a
sub-harness is used, refer to Wiring Diagram in each individual section and Harness Layout in EL
section for identification of harness connectors.
5. When checking circuit continuity, ignition switch should be OFF.
6. Before checking voltage at connectors, check battery voltage.
7. After accomplishing the Diagnostic Procedures and Electrical Components Inspection, make sure
that all harness connectors are reconnected as they were.
DESCRIPTION
NOTICE:
Trouble diagnoses indicate work procedures required to diagnose problems effectively. Observe the following
instructions before diagnosing.
1. Before performing trouble diagnoses, read the “Preliminary Check”, the “Symptom Chart” or the
“Work Flow”.
2. After repairs, re-check that the problem has been completely eliminated.
3. Refer to Component Parts and Harness Connector Location for the Systems described in each
section for identification/location of components and harness connectors.
4. Refer to the Circuit Diagram for quick pinpoint check.
If you need to check circuit continuity between harness connectors in more detail, such as when a
sub-harness is used, refer to Wiring Diagram in each individual section and Harness Layout in PG
section for identification of harness connectors.
5. When checking circuit continuity, ignition switch should be OFF.
6. Before checking voltage at connectors, check battery voltage.
7. After accomplishing the Diagnostic Procedures and Electrical Components Inspection, make sure
that all harness connectors are reconnected as they were.
17. HOW TO USE THIS MANUAL
GI-11
C
D
E
F
G
H
I
J
K
L
M
B
GI
Revision: January 2005 2004 Pathfinder Armada
HOW TO FOLLOW TEST GROUPS IN TROUBLE DIAGNOSES
1. Work and diagnostic procedure
Start to diagnose a problem using procedures indicated in enclosed test groups.
2. Questions and required results
Questions and required results are indicated in bold type in test group.
The meaning of are as follows:
3. Symbol used in illustration
Symbols included in illustrations refer to measurements or procedures. Before diagnosing a problem,
familiarize yourself with each symbol. Refer to "Connector Symbols" in GI Section and "KEY TO SYM-
BOLS SIGNIFYING MEASUREMENTS OR PROCEDURES" below.
4. Action items
Next action for each test group is indicated based on result of each question. Test group number is shown
in the left upper portion of each test group.
HARNESS WIRE COLOR AND CONNECTOR NUMBER INDICATION
There are two types of harness wire color and connector number indication.
SAIA0256E
a. Battery voltage → 11 - 14V or approximately 12V
b. Voltage : Approximately 0V → Less than 1V
18. GI-12
HOW TO USE THIS MANUAL
Revision: January 2005 2004 Pathfinder Armada
Type 1: Harness Wire Color And Connector Number Are Shown In Illustration
● Letter designations next to test meter probe indicate harness
wire color.
● Connector numbers in a single circle (e.g. M33) indicate har-
ness connectors.
● Connector numbers in a double circle indicate component con-
nectors.
AGI070
19. HOW TO USE THIS MANUAL
GI-13
C
D
E
F
G
H
I
J
K
L
M
B
GI
Revision: January 2005 2004 Pathfinder Armada
Type 2: Harness Wire Color And Connector Number Are Shown In Text
KEY TO SYMBOLS SIGNIFYING MEASUREMENTS OR PROCEDURES
SGI144A
Symbol Symbol explanation Symbol Symbol explanation
Check after disconnecting the connec-
tor to be measured.
Procedure with Generic Scan Tool
(GST, OBD-II scan tool)
Check after connecting the connector
to be measured.
Procedure without CONSULT, CON-
SULT-II or GST
Insert key into ignition switch. A/C switch is “OFF”.
Remove key from ignition switch. A/C switch is “ON”.
Turn ignition switch to “OFF” position. REC switch is “ON”.
Turn ignition switch to “ON” position. REC switch is “OFF”.
Turn ignition switch to “START” posi-
tion.
Fan switch is “ON”. (At any position
except for “OFF” position)
Turn ignition switch from “OFF” to
“ACC” position.
Fan switch is “OFF”.
Turn ignition switch from “ACC” to
“OFF” position.
Apply positive voltage from battery
with fuse directly to components.
20. GI-14
HOW TO USE THIS MANUAL
Revision: January 2005 2004 Pathfinder Armada
Turn ignition switch from “OFF” to
“ON” position.
Drive vehicle.
Turn ignition switch from “ON” to
“OFF” position.
Disconnect battery negative cable.
Do not start engine, or check with
engine stopped.
Depress brake pedal.
Start engine, or check with engine run-
ning.
Release brake pedal.
Apply parking brake. Depress accelerator pedal.
Release parking brake. Release accelerator pedal.
Check after engine is warmed up suffi-
ciently.
Pin terminal check for SMJ type ECM
and TCM connectors.
For details regarding the terminal
arrangement, refer to the “ELEC-
TRICAL UNITS” electrical reference
page at the end of the manual.
Voltage should be measured with a
voltmeter.
Circuit resistance should be measured
with an ohmmeter.
Current should be measured with an
ammeter.
Pulse signal should be checked with
an oscilloscope.
Procedure with CONSULT-II
Procedure without CONSULT-II
Symbol Symbol explanation Symbol Symbol explanation
21. HOW TO USE THIS MANUAL
GI-15
C
D
E
F
G
H
I
J
K
L
M
B
GI
Revision: January 2005 2004 Pathfinder Armada
How to Read Wiring Diagrams EAS00119
CONNECTOR SYMBOLS
Most of connector symbols in wiring diagrams are shown from the
terminal side.
● Connector symbols shown from the terminal side are enclosed
by a single line and followed by the direction mark.
● Connector symbols shown from the harness side are enclosed
by a double line and followed by the direction mark.
● Certain systems and components, especially related to OBD,
may use a new style slide-locking type harness connector. For
description and how to disconnect, refer to PG-66, "HARNESS
CONNECTOR" .
● Male and female terminals
Connector guides for male terminals are shown in black and
female terminals in white in wiring diagrams.
SGI364
SGI363
22. GI-16
HOW TO USE THIS MANUAL
Revision: January 2005 2004 Pathfinder Armada
SAMPLE/WIRING DIAGRAM - EXAMPL -
● For detail, refer to following “DESCRIPTION”.
SGI091A
23. HOW TO USE THIS MANUAL
GI-17
C
D
E
F
G
H
I
J
K
L
M
B
GI
Revision: January 2005 2004 Pathfinder Armada
Optional Splice
DESCRIPTION
SGI942
Num-
ber
Item Description
1 Power condition
● This shows the condition when the system receives battery positive voltage (can be oper-
ated).
2 Fusible link
● The double line shows that this is a fusible link.
● The open circle shows current flow in, and the shaded circle shows current flow out.
3
Fusible link/fuse loca-
tion
● This shows the location of the fusible link or fuse in the fusible link or fuse box. For arrange-
ment, refer to PG section, POWER SUPPLY ROUTING.
4 Fuse
● The single line shows that this is a fuse.
● The open circle shows current flow in, and the shaded circle shows current flow out.
5 Current rating ● This shows the current rating of the fusible link or fuse.
6 Connectors
● This shows that connector E3 is female and connector M1 is male.
● The G/R wire is located in the 1A terminal of both connectors.
● Terminal number with an alphabet (1A, 5B, etc.) indicates that the connector is SMJ connec-
tor. Refer to PG section, SMJ (SUPER MULTIPLE JUNCTION).
7 Optional splice ● The open circle shows that the splice is optional depending on vehicle application.
8 Splice ● The shaded circle shows that the splice is always on the vehicle.
9 Page crossing
● This arrow shows that the circuit continues to an adjacent page.
● The A will match with the A on the preceding or next page.
10 Common connector ● The dotted lines between terminals show that these terminals are part of the same connector.
11 Option abbreviation ● This shows that the circuit is optional depending on vehicle application.
12 Relay
● This shows an internal representation of the relay. For details, refer to PG section, STAN-
DARDIZED RELAY.
13 Connectors ● This shows that the connector is connected to the body or a terminal with bolt or nut.
24. GI-18
HOW TO USE THIS MANUAL
Revision: January 2005 2004 Pathfinder Armada
14 Wire color
● This shows a code for the color of the wire.
B = Black
W = White
R = Red
G = Green
L = Blue
Y = Yellow
LG = Light Green
BR = Brown
OR or O = Orange
P = Pink
PU or V (Violet) = Purple
GY or GR = Gray
SB = Sky Blue
CH = Dark Brown
DG = Dark Green
When the wire color is striped, the base color is given first, followed by the stripe color as shown
below:
Example: L/W = Blue with White Stripe
15 Option description ● This shows a description of the option abbreviation used on the page.
16 Switch
● This shows that continuity exists between terminals 1 and 2 when the switch is in the A posi-
tion. Continuity exists between terminals 1 and 3 when the switch is in the B position.
17 Assembly parts ● Connector terminal in component shows that it is a harness incorporated assembly.
18 Cell code
● This identifies each page of the wiring diagram by section, system and wiring diagram page
number.
19 Current flow arrow
● Arrow indicates electric current flow, especially where the direction of standard flow (vertically
downward or horizontally from left to right) is difficult to follow.
● A double arrow “ ” shows that current can flow in either direction depending on cir-
cuit operation.
20 System branch
● This shows that the system branches to another system identified by cell code (section and
system).
21 Page crossing
● This arrow shows that the circuit continues to another page identified by cell code.
● The C will match with the C on another page within the system other than the next or preced-
ing pages.
22 Shielded line ● The line enclosed by broken line circle shows shield wire.
23
Component box in
wave line
● This shows that another part of the component is also shown on another page (indicated by
wave line) within the system.
24 Component name ● This shows the name of a component.
25 Connector number
● This shows the connector number.
● The letter shows which harness the connector is located in.
● Example: M : main harness. For detail and to locate the connector, refer to PG section "Main
Harness", “Harness Layout”. A coordinate grid is included for complex harnesses to aid in
locating connectors.
26 Ground (GND)
● The line spliced and grounded under wire color shows that ground line is spliced at the
grounded connector.
27 Ground (GND)
● This shows the ground connection. For detailed ground distribution information, refer to
"Ground Distribution" in PG section.
28 Connector views ● This area shows the connector faces of the components in the wiring diagram on the page.
29 Common component
● Connectors enclosed in broken line show that these connectors belong to the same compo-
nent.
30 Connector color
● This shows a code for the color of the connector. For code meaning, refer to wire color codes,
Number 14 of this chart.
31
Fusible link and fuse
box
● This shows the arrangement of fusible link(s) and fuse(s), used for connector views of
"POWER SUPPLY ROUTING" in PG section.
The open square shows current flow in, and the shaded square shows current flow out.
32 Reference area
● This shows that more information on the Super Multiple Junction (SMJ) and Joint Connectors
(J/C) exists on the PG section. Refer to "Reference Area" for details.
Num-
ber
Item Description
25. HOW TO USE THIS MANUAL
GI-19
C
D
E
F
G
H
I
J
K
L
M
B
GI
Revision: January 2005 2004 Pathfinder Armada
Harness Indication
● Letter designations next to test meter probe indicate harness
(connector) wire color.
● Connector numbers in a single circle M33 indicate harness con-
nectors.
Component Indication
Connector numbers in a double circle F211 indicate component connectors.
Switch Positions
Switches are shown in wiring diagrams as if the vehicle is in the “normal” condition.
A vehicle is in the “normal” condition when:
● ignition switch is “OFF”,
● doors, hood and trunk lid/back door are closed,
● pedals are not depressed, and
● parking brake is released.
Detectable Lines and Non-Detectable Lines
In some wiring diagrams, two kinds of lines, representing wires, with different weight are used.
AGI070
SGI860
26. Thank you very much
for your reading.
Please Click Here
Then Get More
Information.