The document describes vehicle models and specifications for 1985-1995. It provides details on model identification numbers, engine types, dimensions, features and specifications for each model year. Model numbers are used to identify the chassis type and engine configuration. Specifications covered include engine details, dimensions, capacity, suspension and other technical details.
Yanmar 3 hm35c marine diesel engine service repair manualfjsefkkefmmem
The document promotes clicking a link to get more information. It thanks the reader for their time and directs them to click a link for additional details. The summary is brief and focuses on the key points of directing the reader to click a link and obtain further information.
Yanmar 2 tm marine diesel engine service repair manualfjsefkkefmmem
This short document encourages the reader to click a link for more information after thanking them for reading. It asks the reader to click a link and provides no other context or details about the topic of the information.
Cummins onan dfek generator set with power command 3200 controller service re...fjsefkkefmmem
This service manual provides instructions for servicing generator sets with PowerCommand 3200 controllers. It covers safety precautions, control operation and calibration, servicing the generator, and wiring diagrams. The manual instructs technicians on testing equipment, modifying setup menus, calibration procedures, disassembling and reassembling the generator, and ensuring safe operation.
2004 suzuki outboard df90, df100, df115, df140 service repair manualfjsefkkefmmem
This document is a service manual for Suzuki outboard motors models DF90/115/140. It contains sections on general information, periodic maintenance, engine systems, fuel system, power unit, and other systems. The general information section provides specifications, service data, tightening torques, and lists of special tools and required materials for working on these outboard motors. It describes identifying information, break-in procedures, recommended fuels and oils, and powerhead rotation direction.
2004 sea doo gtx 4-tec wakeboard edition service repair manualfjsefkkefmmem
The document is a short request to thank the reader for reading and asks them to click a link to get more information on an unspecified topic. It provides no other context or details about the information being discussed.
1997 suzuki outboards 2 hp 225hp service repair manualfjsefkkefmmem
This document provides an overview of maintaining and repairing outboard engines. It discusses general information like terminology, safety procedures, and avoiding common mistakes. It also outlines regulations for registering boats and required safety equipment like fire extinguishers, flotation devices, and sound-producing devices. Maintaining engines through procedures in this manual can save money compared to repairs.
1996 suzuki outboards 2 hp 225hp service repair manualfjsefkkefmmem
This document provides an overview of maintaining and repairing outboard engines. It discusses the contents of the manual, general safety information, regulations for boats, required safety equipment, and tips for do-it-yourself maintenance and repairs. Key points include following safety procedures, properly identifying parts, double checking that the correct parts are purchased, and knowing when certain jobs require professional help. The document aims to help boat owners better understand engine maintenance while saving money by performing routine tasks themselves.
1995 polaris xlt sks snowmobile service repair manualfjsefkkefmmem
The document describes vehicle models and specifications for 1985-1995. It provides details on model identification numbers, engine types, dimensions, features and specifications for each model year. Model numbers are used to identify the chassis type and engine configuration. Specifications covered include engine details, dimensions, capacity, suspension and other technical details.
Yanmar 3 hm35c marine diesel engine service repair manualfjsefkkefmmem
The document promotes clicking a link to get more information. It thanks the reader for their time and directs them to click a link for additional details. The summary is brief and focuses on the key points of directing the reader to click a link and obtain further information.
Yanmar 2 tm marine diesel engine service repair manualfjsefkkefmmem
This short document encourages the reader to click a link for more information after thanking them for reading. It asks the reader to click a link and provides no other context or details about the topic of the information.
Cummins onan dfek generator set with power command 3200 controller service re...fjsefkkefmmem
This service manual provides instructions for servicing generator sets with PowerCommand 3200 controllers. It covers safety precautions, control operation and calibration, servicing the generator, and wiring diagrams. The manual instructs technicians on testing equipment, modifying setup menus, calibration procedures, disassembling and reassembling the generator, and ensuring safe operation.
2004 suzuki outboard df90, df100, df115, df140 service repair manualfjsefkkefmmem
This document is a service manual for Suzuki outboard motors models DF90/115/140. It contains sections on general information, periodic maintenance, engine systems, fuel system, power unit, and other systems. The general information section provides specifications, service data, tightening torques, and lists of special tools and required materials for working on these outboard motors. It describes identifying information, break-in procedures, recommended fuels and oils, and powerhead rotation direction.
2004 sea doo gtx 4-tec wakeboard edition service repair manualfjsefkkefmmem
The document is a short request to thank the reader for reading and asks them to click a link to get more information on an unspecified topic. It provides no other context or details about the information being discussed.
1997 suzuki outboards 2 hp 225hp service repair manualfjsefkkefmmem
This document provides an overview of maintaining and repairing outboard engines. It discusses general information like terminology, safety procedures, and avoiding common mistakes. It also outlines regulations for registering boats and required safety equipment like fire extinguishers, flotation devices, and sound-producing devices. Maintaining engines through procedures in this manual can save money compared to repairs.
1996 suzuki outboards 2 hp 225hp service repair manualfjsefkkefmmem
This document provides an overview of maintaining and repairing outboard engines. It discusses the contents of the manual, general safety information, regulations for boats, required safety equipment, and tips for do-it-yourself maintenance and repairs. Key points include following safety procedures, properly identifying parts, double checking that the correct parts are purchased, and knowing when certain jobs require professional help. The document aims to help boat owners better understand engine maintenance while saving money by performing routine tasks themselves.
1995 polaris xlt sks snowmobile service repair manualfjsefkkefmmem
The document describes vehicle models and specifications for 1985-1995. It provides details on model identification numbers, engine types, dimensions, features and specifications for each model year. Model numbers are used to identify the chassis type and engine configuration. Specifications covered include engine details, dimensions, capacity, suspension and other technical details.
1995 polaris wide trak lx snowmobile service repair manualfjsefkkefmmem
The document describes Polaris snowmobile models and specifications from 1985 to 1995. It provides details on model identification by serial number and model number. For each year from 1985 to 1995, the document lists the models produced that year and provides key specifications and features for each, including engine type, displacement, dimensions, suspension, brakes, storage and other details.
1994 polaris xlt sp snowmobile service repair manualfjsefkkefmmem
The document describes Polaris snowmobile models and specifications from 1985 to 1995. It provides details on model identification by serial number and model number. For each year from 1985 to 1995, the document lists the models produced that year and provides key specifications and features for each, including engine type, displacement, dimensions, suspension, brakes, storage and other details.
1994 polaris xlt snowmobile service repair manualfjsefkkefmmem
The document describes Polaris snowmobile models and specifications from 1985 to 1995. It provides details on model identification by serial number and model number. For each year from 1985 to 1995, the document lists the models produced that year and provides key specifications and features for each, including engine type, displacement, dimensions, suspension, brakes, storage and other details.
1994 polaris xlt sks snowmobile service repair manualfjsefkkefmmem
The document describes Polaris snowmobile models and specifications from 1985 to 1995. It provides details on model identification by serial number and model number. For each year from 1985 to 1995, the document lists the models produced that year along with their engine type, displacement, dimensions, features and specifications.
1994 polaris wide trak lx snowmobile service repair manualfjsefkkefmmem
The document describes vehicle models and specifications for 1985-1995. It provides details on model identification numbers, engine types, dimensions, features and specifications for each model year. Model details are given for 1985 models including the Star, SS, Indy Trail, Indy 600, 600SE and LongTrack.
1994 polaris star lite gt snowmobile service repair manualfjsefkkefmmem
The document describes Polaris snowmobile models and specifications from 1985 to 1995. It provides details on model identification by serial number and model number. For each year from 1985 to 1995, the document lists the models produced that year along with their engine type, displacement, dimensions, features and specifications.
1994 polaris sport snowmobile service repair manualfjsefkkefmmem
The document describes Polaris snowmobile models and specifications from 1985 to 1995. It provides details on model identification by serial number and model number. For each year from 1985 to 1995, the document lists the models produced that year and provides key specifications and features for each, including engine type, displacement, dimensions, suspension, brakes, storage and other details.
Nissan forklift o frame - oph series service repair manualfjsefkkefmmem
This document is a service manual for ATLET picking trucks in the OP series. It provides general information and technical data about the trucks. Some key points covered include:
- How to use the manual and find relevant information for specific problems or procedures.
- Important changes that have been made to OP models over time that should be considered during service.
- Approved lifting points on the trucks when lifting for service or with a jack.
- Important safety instructions that must be followed when working on the trucks, such as securing the truck, disconnecting the battery, and preventing unintended movement.
- General safety risks associated with working on fork trucks and the precautions that should be taken regarding fire,
Massey ferguson mf 1100 tractor service parts catalogue manualfjsefkkefmmem
This document provides a list of parts for an MF 1100/1130 tractor engine. It includes 58 numbered items with descriptions of cylinder block components such as the block, gaskets, bolts, plugs, and related parts. Specifications are provided for early and late production parts variations.
Massey ferguson mf 825 tractor service parts catalogue manual (part number 9...fjsefkkefmmem
This document provides parts listings and descriptions for engines, generators, and starters for Massey Ferguson MF 25/825 tractors. It includes over 50 individual part items grouped under components like "ENGINE AND ACCESSORIES", "GENERATOR", and listings for specific starter models from Paris-Rhone and Ducellier. Each part is identified by part number, quantity required, and sometimes additional details. Diagrams reference other pages for additional information on some parts.
Massey ferguson 4220 tractors service parts catalogue manual (part number 81...fjsefkkefmmem
1. The document provides parts lists and descriptions for engine installation on Massey Ferguson 4215/4220 tractors, including the cylinder block, alternators, starters, heaters, and other engine components.
2. It lists 45 individual parts along with part numbers, quantities, descriptions and other identifying information to support engine maintenance and repair.
3. Footnotes provide additional details on some parts and kits that group related components.
Caterpillar cat 424 d backhoe loader (prefix bgp) service repair manual (bgp0...fjsefkkefmmem
This document provides instructions for disassembling and assembling the rear drive and steering axle housing of a Caterpillar 424D backhoe loader. The summary is:
1. The document outlines 18 steps to disassemble the rear axle housing, including draining fluids, removing bolts and pins, measuring components, and using lifting devices to remove heavy parts like the axle housing.
2. Key components that are disassembled include the differential, final drive, steering knuckles, axle shaft, sun gear, seals, bearings, and bushings.
3. Detailed illustrations are provided to identify each part and guide the removal process. Notes emphasize properly retaining shims and markings
This document provides instructions to remove and install an engine from a Caterpillar 420F2 backhoe loader. It outlines 19 steps to remove the engine, which include draining fluids, disconnecting electrical components, removing mounting hardware and using lifting equipment. It then outlines 19 steps for installing the engine in reverse order. The document provides detailed illustrations and notes for each step. Its purpose is to guide maintenance technicians through safely removing and reinstalling the engine.
This document provides instructions for servicing an engine. It describes how to install an engine by attaching it to the machine using lifting tools, aligning and bolting components like the bell housing and flywheel. It also details removing and installing other engine parts such as the fuel priming pump, fuel injection lines, nozzles and filters. The procedures note cleaning parts and plugging lines to prevent contamination.
The document provides instructions for disassembling and assembling components of a 420F2 Backhoe Loader transmission. It describes removing the transmission from the machine and then disassembling its internal components like gears, shafts, bearings, and solenoids. Safety warnings are included to release spring forces carefully using the proper tools to avoid injury from propelled parts. Detailed illustrations supplement each step of the process.
This document provides instructions for removing and installing the crankshaft rear seal and wear sleeve on a Caterpillar 3054C engine. The crankshaft rear seal is non-serviceable and must be replaced with the entire housing assembly. To remove the seal, the flywheel must first be removed, then the housing assembly is taken off using setscrews. Installation requires pressing the new seal assembly onto the crankshaft using a plastic sleeve for protection. A wear sleeve can also be removed using a puller and installed by pressing it onto the crankshaft.
This document provides instructions for removing and installing inlet and exhaust valves on a Caterpillar C4.4 engine. The removal procedure involves using a valve spring compressor tool to compress the springs, remove keepers, and take out the valves. For installation, the valves are lubricated and inserted into the cylinder head, new seals are installed on the guides, springs and retainers are compressed using the tool and keepers are installed. The engine oil filter base and engine oil cooler are also removed and installed, following cleaning and installation of new gaskets.
This document provides instructions for removing and installing a crankshaft rear seal and flywheel housing on a Caterpillar C4.4 engine. The summary is:
1) The procedure describes removing the crankshaft rear seal by taking out torx screws and removing the seal.
2) Installing the new crankshaft rear seal involves aligning it with the crankshaft flange and cylinder block holes before tightening torx screws.
3) Removing the flywheel housing requires removing bolts and lifting the housing off. Installing requires fitting a new gasket and oil seal before bolting the housing back in place.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
1995 polaris wide trak lx snowmobile service repair manualfjsefkkefmmem
The document describes Polaris snowmobile models and specifications from 1985 to 1995. It provides details on model identification by serial number and model number. For each year from 1985 to 1995, the document lists the models produced that year and provides key specifications and features for each, including engine type, displacement, dimensions, suspension, brakes, storage and other details.
1994 polaris xlt sp snowmobile service repair manualfjsefkkefmmem
The document describes Polaris snowmobile models and specifications from 1985 to 1995. It provides details on model identification by serial number and model number. For each year from 1985 to 1995, the document lists the models produced that year and provides key specifications and features for each, including engine type, displacement, dimensions, suspension, brakes, storage and other details.
1994 polaris xlt snowmobile service repair manualfjsefkkefmmem
The document describes Polaris snowmobile models and specifications from 1985 to 1995. It provides details on model identification by serial number and model number. For each year from 1985 to 1995, the document lists the models produced that year and provides key specifications and features for each, including engine type, displacement, dimensions, suspension, brakes, storage and other details.
1994 polaris xlt sks snowmobile service repair manualfjsefkkefmmem
The document describes Polaris snowmobile models and specifications from 1985 to 1995. It provides details on model identification by serial number and model number. For each year from 1985 to 1995, the document lists the models produced that year along with their engine type, displacement, dimensions, features and specifications.
1994 polaris wide trak lx snowmobile service repair manualfjsefkkefmmem
The document describes vehicle models and specifications for 1985-1995. It provides details on model identification numbers, engine types, dimensions, features and specifications for each model year. Model details are given for 1985 models including the Star, SS, Indy Trail, Indy 600, 600SE and LongTrack.
1994 polaris star lite gt snowmobile service repair manualfjsefkkefmmem
The document describes Polaris snowmobile models and specifications from 1985 to 1995. It provides details on model identification by serial number and model number. For each year from 1985 to 1995, the document lists the models produced that year along with their engine type, displacement, dimensions, features and specifications.
1994 polaris sport snowmobile service repair manualfjsefkkefmmem
The document describes Polaris snowmobile models and specifications from 1985 to 1995. It provides details on model identification by serial number and model number. For each year from 1985 to 1995, the document lists the models produced that year and provides key specifications and features for each, including engine type, displacement, dimensions, suspension, brakes, storage and other details.
Nissan forklift o frame - oph series service repair manualfjsefkkefmmem
This document is a service manual for ATLET picking trucks in the OP series. It provides general information and technical data about the trucks. Some key points covered include:
- How to use the manual and find relevant information for specific problems or procedures.
- Important changes that have been made to OP models over time that should be considered during service.
- Approved lifting points on the trucks when lifting for service or with a jack.
- Important safety instructions that must be followed when working on the trucks, such as securing the truck, disconnecting the battery, and preventing unintended movement.
- General safety risks associated with working on fork trucks and the precautions that should be taken regarding fire,
Massey ferguson mf 1100 tractor service parts catalogue manualfjsefkkefmmem
This document provides a list of parts for an MF 1100/1130 tractor engine. It includes 58 numbered items with descriptions of cylinder block components such as the block, gaskets, bolts, plugs, and related parts. Specifications are provided for early and late production parts variations.
Massey ferguson mf 825 tractor service parts catalogue manual (part number 9...fjsefkkefmmem
This document provides parts listings and descriptions for engines, generators, and starters for Massey Ferguson MF 25/825 tractors. It includes over 50 individual part items grouped under components like "ENGINE AND ACCESSORIES", "GENERATOR", and listings for specific starter models from Paris-Rhone and Ducellier. Each part is identified by part number, quantity required, and sometimes additional details. Diagrams reference other pages for additional information on some parts.
Massey ferguson 4220 tractors service parts catalogue manual (part number 81...fjsefkkefmmem
1. The document provides parts lists and descriptions for engine installation on Massey Ferguson 4215/4220 tractors, including the cylinder block, alternators, starters, heaters, and other engine components.
2. It lists 45 individual parts along with part numbers, quantities, descriptions and other identifying information to support engine maintenance and repair.
3. Footnotes provide additional details on some parts and kits that group related components.
Caterpillar cat 424 d backhoe loader (prefix bgp) service repair manual (bgp0...fjsefkkefmmem
This document provides instructions for disassembling and assembling the rear drive and steering axle housing of a Caterpillar 424D backhoe loader. The summary is:
1. The document outlines 18 steps to disassemble the rear axle housing, including draining fluids, removing bolts and pins, measuring components, and using lifting devices to remove heavy parts like the axle housing.
2. Key components that are disassembled include the differential, final drive, steering knuckles, axle shaft, sun gear, seals, bearings, and bushings.
3. Detailed illustrations are provided to identify each part and guide the removal process. Notes emphasize properly retaining shims and markings
This document provides instructions to remove and install an engine from a Caterpillar 420F2 backhoe loader. It outlines 19 steps to remove the engine, which include draining fluids, disconnecting electrical components, removing mounting hardware and using lifting equipment. It then outlines 19 steps for installing the engine in reverse order. The document provides detailed illustrations and notes for each step. Its purpose is to guide maintenance technicians through safely removing and reinstalling the engine.
This document provides instructions for servicing an engine. It describes how to install an engine by attaching it to the machine using lifting tools, aligning and bolting components like the bell housing and flywheel. It also details removing and installing other engine parts such as the fuel priming pump, fuel injection lines, nozzles and filters. The procedures note cleaning parts and plugging lines to prevent contamination.
The document provides instructions for disassembling and assembling components of a 420F2 Backhoe Loader transmission. It describes removing the transmission from the machine and then disassembling its internal components like gears, shafts, bearings, and solenoids. Safety warnings are included to release spring forces carefully using the proper tools to avoid injury from propelled parts. Detailed illustrations supplement each step of the process.
This document provides instructions for removing and installing the crankshaft rear seal and wear sleeve on a Caterpillar 3054C engine. The crankshaft rear seal is non-serviceable and must be replaced with the entire housing assembly. To remove the seal, the flywheel must first be removed, then the housing assembly is taken off using setscrews. Installation requires pressing the new seal assembly onto the crankshaft using a plastic sleeve for protection. A wear sleeve can also be removed using a puller and installed by pressing it onto the crankshaft.
This document provides instructions for removing and installing inlet and exhaust valves on a Caterpillar C4.4 engine. The removal procedure involves using a valve spring compressor tool to compress the springs, remove keepers, and take out the valves. For installation, the valves are lubricated and inserted into the cylinder head, new seals are installed on the guides, springs and retainers are compressed using the tool and keepers are installed. The engine oil filter base and engine oil cooler are also removed and installed, following cleaning and installation of new gaskets.
This document provides instructions for removing and installing a crankshaft rear seal and flywheel housing on a Caterpillar C4.4 engine. The summary is:
1) The procedure describes removing the crankshaft rear seal by taking out torx screws and removing the seal.
2) Installing the new crankshaft rear seal involves aligning it with the crankshaft flange and cylinder block holes before tightening torx screws.
3) Removing the flywheel housing requires removing bolts and lifting the housing off. Installing requires fitting a new gasket and oil seal before bolting the housing back in place.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
2. MODELS AND SPECIFICATIONS
1985 Model Identification
SERIAL NUMBER IDENTIFICATION
The machine serial number may be used as an aid in identifying machine model year. Refer to the first digits inthe serial number
for proper identification:
FIRST DIGITS MODEL YEAR
12 1985
1985 MODEL DESIGNATION
YEAR DESIGNATION--------;=:;=::l;I:--:;-, ENGINE DESIGNATION
I 0 8 510 9 17
MODEL DESIGNATION __________-----'
1985
MODEL DESIGNATION
NUMBERS (Chassis) .
07 - Indy Trail, 400, 600
08 - Indy 600 SE
09 - Star
13- SS
14 - LongTrack
1985
ENGINE DESIGNATION
NUMBERS
27 - EC25PS-Single FC
43 - EC44-2PM-2100-Twin FC
49 - EC44-2PM-Twin FC
57 - EC60PL-02-Three LC
59 - EC40PL-02-Twin LC
MODEL. NUMBER MACHINE DESCRIPTION MODEL NUMBER MACHINE DESCRIPTION
0850927
0851349
0850743
0850759
Star 244cc Single FC
SS 432cc Twin FC
Indy Trail 432cc Twin FC
Indy 400. 398cc Twin LC
0850757
0850847
0851449
Indy 600 596cc Three LC
Indy 600 SE 597cc Three LC
LongTrack 432cc Twin FC
MODEL NO. MADE IN U.S.A. POLRRIS
PATENT NOTICE
SERIAL NO.
THIS VEHICLE CONFORMS TO ALL APPLICABLE U.S.
FEDERAL AND S ,ATE REr'l1I1REMENTS AND
CANADIAN FEDERAL MC- - o-ilCLE STANDARDS
IN EFFECT ON THE DATE C, J FACTURE.
MFD. DATE:
MId. by Polaris Industries L.P.
in Roseau, MN under one or more of the following patents:
U.S, Patents 3,605,511 3,533,662 3,613,811
3,580,647 3,613,810 3,605,510
3,483,766 3,545,821 3,525,412
Patented Canada 662,491n1 883,694n1
Canadian Rd, 34,573n1 34,572171
3,867,991
4,793,950
5,038,881
864,394n1
1,227,823/87
7072133
These numbers should be referred to in any correspondence regarding warranty, service or replacement parts.
The machine model and serial number identification decal is located on the right front side of the tunnel. The serial number is
permanently stamped into the tunnel. The model number is embossed on the decal.
Whenever corresponding about an engine it is important that the engine model and serial numbers be called out. Laser
engraved model and serial numbers are located on the crankcase (intake side).
1.1 8/94
"
3. MODELS AND SPECIFICATIONS
1985 Model Identification
600SE
0850857
Engine Type LC Triple
Displacement (cc) 597
Bore x Stroke (mm) 65 x 60
CarburetionlThrottle Body 3 Mikuni
VM38SS Slide
Oil Injected Standard
Ignition COl
Alternator Output 12V 120W
Length (in./cm.) 106.25/269.7
Width (in./cm.) 41 .62/105.6
Height (in./cm.) 31.5/79.9
Ski Stance (in./cm.) 36.5/92.7
Track Width (in./cm.) 15/38.1
Track Length Overall (in./cm.) 121/307.1
Fuel Capacity (U.S. gal./lmp. gal./liters) 7/5.8/26.5
Recommended Fuel 88 Octane Min.
Front Suspension Coil Spring IFS
Chrome Trailing Arms
Brake Type Liquid Cooled
Hydraulic Disc
Storage Rear of Seat
Speedometer Standard
Tachometer Standard
Trip Odometer Standard
Accessory Lights Temp
Electric Start N/A
Handwarmers Option
Two-Up Seat N/A
Backrest N/A
Storage Rack Option
Tow Hitch Option
8/94 1.2
600
0850757
LC Triple
597
65 x 60
3 Mikuni
VM38SS Slide
Standard
COl
12V 120W
106.25/269.7
41.62/105.6
31.5/79.9
36.5/92.7
15/38.1
121/307.1
7/5.8/26.5
88 Octane Min.
Coil Spring IFS
Liquid Cooled
Hydraulic Disc
Rear of Seat
Standard
Standard
Standard
Temp
·N/A
Option
N/A
N/A
Option
Option
400 Long Track
0850759 0851449
LC Twin Fan Cooled Twin
398 432
65 x 60 67.62 x 60
2 Mikuni 1 Mikuni
VM34SS Slide VM30SS Slide
Standard Standard
COl COl
12V 120W 12V 120W
106.25/269.7 120.25/305.2
41 .62/105.6 40/101.5
31.5/79.9 33/83.7
36.5/92.7 31/78.7
15/38.1 15/38.1
121/307.1 148/375.6
7/5.8/26.5 5.4/4.5/20
88 Octane Min. 88 Octane Min.
Coil Spring IFS Mono Leaf
Liquid Cooled Mechanical Disc
Hydraulic Disc
Rear of Seat Rear of Seat
Storage Rack
Standard Standard
Standard Option o
Standard Standard
Temp N/A
N/A N/A
Option Option
N/A N/A
N/A N/A
Option Standard
Option Standard
4. r
Engine Type
Displacement (cc)
Bore x Stroke (mm)
Carl;>uretionfThrottle Body
Oil Injected
Ignition
Alternator Output
Length (in.!cm.)
Width (in.!cm.)
Height (in.!cm.)
Ski Stance (in.!cm.)
Track Width (in.!cm.)
Track Length Overall (in.!cm.)
Fuel Capacity (U.S. gal.llmp. gal./liters)
Recommended Fuel
Front Suspension
Brake Type
Storage
Speedometer
Tachometer
G Trip Odometer
Accessory Lights
Electric Start
Handwarmers
Two-Up Seat
Backrest
Storage Rack
Tow Hitch
1.3
MODELS AND SPECIFICATIONS
1985 Model Identification
. ~.
Indy Trail SS Star
0850743 0851349 0850927
Fan Cooled Twin Fan Cooled Twin Fan Cooled Single
432 432 244
67.62 x 60 67.72 x 60 72 x 60
1 Mikuni 1 Mikuni 1 Mikuni
VM34SS Slide VM34SS Slide VM30SS Slide
Standard Standard Standard
COl COl COl
12V 120W 12V 120W 12V 100W
106.25/269.7 102/258.9 102/258.9
41 .62/105.6 40/101.5 40/101 .5
31.5/83.7 33/83.7 33/83.7
36.5/92.7 31/78.7 31/78.7
15/38.1 15/38.1 15/38.1
121/307.1 120/304.6 108/274.1
7/5.8/26.5 6.8/5.7/25.7 5.414.5120
88 Octane Min. 88 Octane Min. 88 Octane Min.
Coil Spring IFS Mono Leaf Mono Leaf
Hydraulic Disc Mechanical Disc Mechanical Disc
Rear of Seat Rear of Seat Rear of Seat
Standard Standard Option
Standard Standard Option
Standard Standard Option
N/A N/A N/A
Option Option N/A
Standard Option N/A
N/A N/A N/A
N/A N/A N/A
Option N/A N/A
Option Option Option
8/94
5. MODELS AND SPECIFICATIONS
·1986 Model Identification
SERIAL NUMBER IDENTIFICATION
The machine serial number may be used as an aid in identifying machine model year. Referto the first digits in the serial number
for proper identification:
FIRST DIGITS
12
13
MODEL YEAR
1985
1986
1986 MODEL DESIGNATION
YEAR DESIGNATIONI--- - - ----;=::;::=lI:---=1 ENGINE DESIGNATION
I 0 8 610 9 17
MODEL DESIGNATION _ _ _ _ _ _ _ _ _ _ ---'1
1986
MODEL DESIGNATION
NUMBERS (Chassis)
07 - Indy Trail, 400, 600
08 - Indy 600 LE
09 - Star/Sprint 340 (ES)
13 - SS
14 - LongTrack
MODEL NO.
SERIAL NO.
1986
ENGINE DESIGNATION
NUMBERS
27 - EC25PS-Single FC
31 - EC34-2PM-01 -Twin FC (ES)
33 - EC34-2PM-02-Twin FC
49 - EC44-2PM-5100-Twin FC
57 - EC60PL-02-Triple LC
1986
ENGINE DESIGNATION
NUMBERS
59 - EC40PL-02-Twin LC
61 - EC50PM-01-Twin FC
MADE IN U.S.A. PDLRRIS
PATENT NOTICE
Mfd. by Polaris Industries L.P.
THIS VEHICLE CONFORMS TO ALL APPLICABLE U.S.
FEDERAL AND STATE REQUIREMENTS AND
CANADIAN FEDERAL MOTOR VEHICLE STANDARDS
IN EFFECT ON THE DATE OF MANUFACTURE.
in Roseau. MN under one or more of the following patents:
U.S. Patents 3.605.511 3.533.662 3,613,811
3,580.647 3,613,810 3,605,510
3,483,766 3,545,821 3,525,412
Patented Canada 882,491171 883,694171
Canadian Rd. 34,573171 34,572171
MFD. DATE:
These numbers should be referred to in any correspondence regarding warranty, service or replacement parts.
3,867,991
4,793,950
5,038,881
864,394171
1,227,823187
7072133
The machine model and serial number identification decal is located on the right front side of the tunnel. The serial number is
permanently stamped into the tunnel. The model number is embossed on the decal.
Whenever corresponding about an engine it is important that the engine model and serial numbers be called out. Laser
engraved model and serial numbers are located on the crankcase (intake side).
8/94 1.4
,,
o
6. 600 LE
0860857
Engine Type LC Triple
Displacement (cc) 597
Bore x Stroke (mm) 65 x 60
CarburetionfThrottle Body 3 Mikuni
VM38SS Slide
Oil Injected Standard
Ignition COl
Alternator Output 12V 120W
Length (in./cm.) 106.25/269.7
Width (in./cm.) 41.62/105.6
Height (in./cm.) 31.5/79.9
Ski Stance (in./cm.) 36.5/92.7
Track Width (in./cm.) 15/38.1
Track Length Overall (in./cm.) 121/307.1
Fuel Capacity (U.S. gaL/Imp. gaL/liters) 7/5.8/26.5
Recommended Fuel 88 Octane Min.
Front Suspension Coil Spring IFS
Chrome Trailing Arm
Brake Type Liquid Cooled
Hydraulic Disc
Storage Rear of Seat
Speedometer Standard
Tachometer Standard
Trip Odometer Standard
- -
Accessory Lights Temp
Electric Start N/A
Handwarmers Option
Two-Up Seat N/A
Backrest N/A
Storage Rack Option
Tow Hitch Option
1.5
MODELS AND SPECIFICATIONS
1986 Model Identification
600 400 Long Track
0860757 0860759 0861449
LC Triple LC Twin Fan Cooled Twin
597 398 432
65 x 60 65 x 60 66.72 x 60
3 Mikuni 2 Mikuni 1 Mikuni
VM38SS Slide VM34SS Slide VM30SS Slide
Standard Standard Standard
COl COl COl
12V 120W 12V 120W 12V 120W
106.25/269.7 106.25/269.7 120.25/305.2
41 .62/105.6 41 .62/105.6 40/101.5
31.5/79.9 31 .5/79.9 33/83.7
36.5/92.7 36.5/92.7 31/78.7
15/38.1 15/38.1 15/38.1
121/307.1 121/307.1 148/375.6
7/5.8/26.5 7/5.8/26.5 7.5/6.2/28
88 Octane Min. 88 Octane Min. 88 Octane Min.
Coil Spring IFS Coil Spring IFS Mono Leaf
Liquid Cooled Liquid Cooled Mechanical Disc
Hydraulic Disc Hydraulic Disc
Rear of Seat Rear of Seat Rear of Seat
Storage Rack
Standard Standard Standard
Standard Standard Option
Standard Standard Standard
Temp Temp N/A
N/A N/A N/A
Option Option Option
N/A N/A N/A
N/A N/A N/A
Option Option Standard
Option Option Standard
8/94
7. MODELS AND SPECIFICATIONS
1986 Model Identification
Indy Trail SS
0860761 0861349
Engine Type Fan Cooled Twin Fan Cooled Twin
Displacement (cc) 488 432
Bore x Stroke (mm) 72 x 60 67.72 x 60
CarburetionfThrottle 2 Mikuni 1 Mikuni
Body VM34SS Slide VM34SS Slide
Oil Injected Standard Standard
Ignition COl COl
Alternator Output 12V 120W 12V 120W
Length (in./cm.) 106.25/269.7 102/258.9
Width (in./cm.) 41.62/105.6 40/101.5
Height (in./cm.) 31 .5/79.9 33/83.7
Ski Stance (in./cm.) 36.5/92.7 31/78.7
Track Width (in./cm.) 15/38.1 15/38.1
Track Length Overall 121/307.1 120/304.6
(in./cm.)
Fuel Capacity (U.S. 7/5.8/26.5 7.5/6.2/28
gal./lmp. gal./liters)
Recommended Fuel 88 Octane Min. 88 Octane Min.
Front Suspension Coil Spring IFS Mono Leaf
Brake Type Hydraulic Disc Mechanical Disc
Storage Rear of Seat Rear of Seat
Speedometer Standard Standard
Tachometer Standard Standard
Trip Odometer Standard Standard
Accessory Lights N/A N/A
Electric Start Option Option
Handwarmers Standard Option
Two-Up Seat N/A N/A
Backrest N/A N/A
Storage Rack Option N/A
Tow Hitch Option Option
8/94 1.6
o
Sprint Sprint ES Star
0860933 0860931 0860927
Fan Cooled Twin Fan Cooled Twin Fan Cooled Single
339 339 244
62 x 55.6 62 x 55.6 72 x 60
2 Mikuni 2 Mikuni 1 Mikuni
VM30SS Slide VM30SS Slide VM30SS Slide
Standard Standard Standard
COl COl COl
12V 120W 12V 120W 12V 100W
102/258.9 102/258.9 102/258.9
40/101.5 40/101.5 40/101.5
33/83.7 33/83.7 33/83.7
31/78.7 31/78.7 31/78.7
15/38.1 15/38.1 15/38.1
108/274.1 108/274.1 108/274.1
5.414.5120 5.4/4.5/20 5.4/4.5/20
88 Octane Min. 88 Octane Min. 88 Octane Min.
Mono Leaf Mono Leaf Mono Leaf
Mechanical Disc Mechanical Disc Mechanical Disc
Rear of Seat Rear of Seat Rear of Seat
Option Standard Option
Option Standard Option
Option Standard Option
N/A N/A N/A
N/A Standard N/A
Option Option N/A
N/A N/A N/A
N/A N/A N/A
N/A N/A N/A
Option Option Option
8. MODELS AND SPECIFICATIONS
1987 Model Identification
SERIAL NUMBER IDENTIFICATION
The machine serial number may be used as an aid in identifying machine model year. Referto the first digits in the serial number
for proper identification:
FIRST DIGITS
12
13
14
MODEL YEAR
1985
1986
1987
1987 MODEL DESIGNATION
YEAR DESIGNATIONI---------,:=:;:::J,
I:--::l ENGINE DESIGNATION
I 0 8 710 9 17
MODEL DESIGNATION __________----'
1987
MODEL DESIGNATION
NUMBERS (Chassis)
09 - Star/Sprint 340 (ES)
10- StarTrak
1987
ENGINE DESIGNATION
NUMBERS
27 - EC25PS-Single FC
1987
ENGINE DESIGNATION
NUMBERS
59 - EC40PL-02-Twin LC
61 - EC50PM-01-Twin FC
14 - LongTrack
31 - EC34-2PM-02-Twin FC ES
33 - EC34-2PM-01 -03-Twin FC
49 - EC44-2PM-5100-Twin FC
57 - EC60PL-02-Triple LC
62 - EC50PM-02-Twin FC ES
15 - Long Track RLR
04 - Indy Sport
05 -Indy 133 SKS
07 - Indy Trail, 400, 600
MODEL NO. MADE IN U.S.A. PDLRRIS
PATENT NOTICE
SERIAL NO.
THIS VEHICLE CONFORMS TO ALL APPLICABLE u.s.
FEDERAL AND STATE REQUIREMENTS AND
CANADIAN FEDERAL MOTOR VEHICLE STANDARDS
IN EFFECT ON THE DATE OF MANUFACTURE.
MFD. DATE:
Mfd. by Polaris Industries loP.
in Roseau. MN under one or more of the following patents:
U.S. Patents 3.605.511 3.533.662 3.613.811
3.580.647 3.613.810 3.605.510
3.483.766 3.545.821 3.525.412
Patented Canada 882,491171 883.694f71
Canadian Rd. 34.573f71 34.572f71
These numbers should be referred to in any correspondence regarding warranty, service or replacement parts.
3.867.991
4.793.950
5.038.881
864.394171
1.227.823/87
7072133
The machine model and serial number identification decal is located on the right front side of the tunnel. The serial number is
permanently stamped into the tunnel. The model number is embossed on the decal.
Whenever corresponding about an engine it is important that the engine model and serial numbers be called out. Laser
engraved model and serial numbers are located on the crankcase (intake side).
1.7 8/94
9. MODELS AND SPECIFICATIONS
1987 Model Identification
Engine Type
Displacement (cc)
Bore x Stroke (mm)
CarburetionlThrottle Body
Oil Injected
Ignition
Alternator Output
Length (in.lcm.)
Width (in.lcm.)
Height (in.lcm.)
Ski Stance (in.lcm.)
Track Width (in./cm.)
Track Length Overall (in./cm.)
Fuel Capacity (U.S. gal./lmp. gal./liters)
Recommended Fuel
Front Suspension
Brake Type
Storage
Speedometer
Tachometer
Trip Odometer
Accessory Lights
Electric Start
Handwarmers
Two-Up Seat
Backrest
Storage Rack
Tow Hitch
8/94
Indy 600
0870757
LC Triple
597
65 x 60
3 Mikuni
VM38SS Slide
Standard
COl
12V 120W
109/276.6
41 .62/105.6
33/83.7
36.5/92.7
15/38.1
121/307.1
7/5.8/26.5
88 Octane Min.
Coil Spring IFS
Liquid Cooled
Hydraulic Disc
Rear of Seat
Standard
Standard
Standard
Temp
N/A
Option
N/A
N/A
Option
Option
1.8
Indy 400
400SKS
0870759
0870559
LCTwin
398
65 x 60
2 Mikuni
VM34SS Slide
Standard
COl
12V 120W
109/276.6
113/286.8 SKS
41.62/105.6
33/83.7
36.5/92.7
15/38.1
121/307.1
133.5/338.8
7/5.8/26.5
88 Octane Min.
Coil Spring IFS
Liquid Cooled
Hydraulic Disc
Rear of Seat
Standard
Standard
Standard
Temp
N/A
Option
N/A
N/A
Option
Option
Indy Trail Long Track
Trail ES I SKS LTR
0870761 0871449
0870762/0870561 0871549
Fan Cooled Twin Fan Cooled Twin
488 432
72 x 60 67.72 x 60
2 Mikuni 1 Mikuni
VM34SS Slide VM30SS Slide
Standard Standard
COl COl
12V 120W 12V 120W
109/276.6 120.25/305.2
.,
113/286.8 SKS
41 .62/105.6 40/101.5
33/83.7 33/83.7 .
36.5/92.7 31/78.7
15/38.1 15/38.1
121/307.1 148/375.6
133.5/338.8
7/5.8/26.5 7.5/6.2/28
88 Octane Min. 88 Octane Min.
Coil Spring IFS Mono Leaf
Hydraulic Disc Mechanical Disc
Rear of Seat Rear of Seat
Standard Standard
Standard Option
Standard Standard
N/A N/A
Option N/A
Standard ES
Standard Option
N/A N/A
N/A N/A
Option Standard
Option Standard
10. Indy Sport
0870433
Engine Type Fan Cooled Twin
Displacement (cc) 339
Bore x Stroke (mm) 62 x 55.6
CarburetionlThrottle Body 2 Mikuni
VM30SS Slide
Oil Injected Standard
Ignition COl
Alternator Output 12V 120W
Length (in./cm.) 109/276.6
Wid1h (in./cm.) 41.62/105.6
Height (in./cm.) 33/83.7
Ski Stance (in./cm.) 36.5/92.7
Track Width (in./cm.) 15/38.1
Track Length Overall (in./cm.) 121/307.1
Fuel Capacity (U.S. gaL/Imp. gal./liters) 7/5.8/26.5
Recommended Fuel 88 Octane Min.
Front Suspension Coil Spring IFS
Brake Type Liquid Cooled
Hydraulic Disc
c
Storage Rear of Seat
Speedometer Standard
Tachometer Option
Trip Odometer Standard
Accessory Lights N/A
Electric Start Option
Handwarmers Option
Two-Up Seat N/A
Backrest N/A
Storage Rack Option
Tow Hitch Option
1.9
MODELS AND SPECIFICATIONS
1987 Model Identification
Sprint Star Star Trak
Sprint ES
08"10933 0870927 0871027
0870931
Fan Cooled Twin Fan Cooled Single Fan Cooled Single
339 244 244
62 x 55.6 72 x 60 72 x 60
2 Mikuni 1 Mikuni 1 Mikuni
VM30SS Slide VM30SS Slide VM30SS Slide
Standard Standard Standard
COl COl COl
12V 120W 12V 100W 12V 100W
1021258.9 102/258.9 109/276.9
40/101.5 40/101.5 40/101.5
33/83.7 33/83.7 34/86.3
31/78.7 31/78.7 31/78.7
15/38.1 15/38.1 15/38.1
108/274.1 108/274.1 133.5/338.9
5.4/4.5/20 5.4/4.5/20 7.5/6.2128
88 Octane Min. 88 Octane Min. 88 Octane Min.
Mono Leaf Mono Leaf Mono Leaf
Mechanical Disc Mechanical Disc Mechanical Disc
Rear of Seat Rear of Seat Rear of Seat
Option Sprint Option Standard
Standard ES
Option Sprint Option Standard
Standard ES
Option Sprint Option Standard
Standard ES
N/A N/A N/A
Sprint ES Only N/A N/A
Option N/A N/A
N/A N/A N/A
N/A N/A N/A
N/A N/A Standard
Option Option Option
8/94
,
11. MODELS AND SPECIFICATIONS
1988 Model Identification
SERIAL NUMBER IDENTIFICATION
The machine serial number may be used as an aid in identifying machine model year. Referto the first digits in the serial number
for proper identification:
FIRST DIGITS
12
13
14
15
MODEL YEAR
1985
1986
1987
1988
1988 MODEL DESIGNATION
YEAR DESIGNATIONI- - - - -- - -;:::==ll~ ENGINE DESIGNATION
I 0 88
10 9 17
MODEL DESIGNATION _________ ---.JI
1988
MODEL DESIGNATION
NUMBERS (Chassis)
09 - Star/Sprint (ES)
10 - StarTrak
15 - Long Track RLR
04 - Indy Sport
05 - Indy 133 SKS
06 - Indy Trail SP
07 - Indy Trail, 400, 650
MODEL NO.
SERIAL NO.
1988
ENGINE DESIGNATION
NUMBERS
27 - EC25PS-Single FC
31 - EC34-2PM-02-Twin FC ES
33 - EC34-2PM-01-03-Twin FC
49 - EC44-2PM-4100-Twin FC
58 - EC65PL-01-Triple LC
1988
ENGINE DESIGNATION
NUMBERS
59 - EC40PL-02-Twin LC
61 - EC50PM-01-Twin FC
62 - EC50PM-02-Twin FC ES
MADE IN U.S.A. PDLRRIS
PATENT NOTICE
Mfd. by Polaris Industries L.P.
THIS VEHICLE CONFORMS TO ALL APPLICABLE U.S.
FEDERAL AND STATE REQUIREMENTS AND
CANADIAN FEDERAL MOTOR VEHICLE STANDARDS
IN EFFECT ON THE DATE OF MANUFACTURE.
in Roseau, MN under one or more of the following patents:
U.S. Patents 3,605.511 3,533.662 3.613,811
3,580,647 3,613,810 3.605.510
3,483.766 3.545.821 3.525,412
Patented Canada 882.491 171 883,694171
Canadian Rd. 34,573171 34,572171
MFD. DATE:
These numbers should be referred to in any correspondence regarding warranty, service or replacement parts.
3,867,991
4,793,950
5,038,881
864,39417t
1,227,823187
7072133
The machine model and serial number identification decal is located on the right front side of the tunnel. The serial number is
permanently stamped into the tunnel. The model number is embossed on the decal.
Whenever corresponding about an engine it is important that the engine model and serial numbers be called out. Laser
engraved model and serial numbers are located on the crankcase (intake side).
8/94 1.10
o
12. Indy 650
Indy 650 SKS
0880758
0880558
Engine Type LC Triple
Displacement (cc) 648
Bore x Stroke (mm) 67.72 x 60
CarburetionlThrottle Body 3 Mikuni
VM38SS Slide
Oil Injected Standard
Ignition COl
Alternator Output 12V 120W
Length (in./cm.) 106.25/269.9
113/287 SKS
Width (in./cm.) 41 .62/105.7
Height (in./cm.) 42/106.7
Ski Stance (in./cm.) 36.5/92.7
Track Width (in./cm.) 15/38 .1
Track Length Overall (in./cm.) 120.96/307.2
133.56/339.2 SKS
Fuel Capacity (U.S. gal./lmp. gal./liters) 7.3/6.1/27.7
Recommended Fuel 88 Octane Min.
o
Front Suspension Coil Spring IFS
Brake Type Liquid Cooled
Hydraulic Disc
Storage Rear of Seat
Speedometer Standard
Tachometer Standard
Trip Odometer Standard
Accessory Lights HighTemp Ind.
Electric Start N/A
Handwarmers Option
Two-Up Seat Option
Backrest Option
Storage Rack Option
Tow Hitch Option
1.11
MODELS AND SPECIFICATIONS
1988 Model Identification
Indy 400 Indy 400 Indy Trail, SP
400SKS Classic Deluxe, ES,
SKS
0880759 0880859 0880761/08806611
0880559 0880262/08807621
0880561
LCTwin LC Twin Fan Cooled Twin
398 398 488
65 x 60 65 x 60 72 x 60
2 Mikuni 2 Mikuni 2 Mikuni
VM34SS Slide VM34SS Slide VM34SS Slide
Standard Standard Standard
COl COl COl
12V 120W 12V 120W 12V 120W
106.25/269.9 106.25/269.9 106.25/269.9
113/287 SKS 113/287 SKS
41 .62/105.7 41 .62/105.7 41.62/105.7
43.12/109.5 SP
42/106.7 42/106.7 42/106.7
36.5/92.7 36.5/92.7 36.5/92.7
38/96.5 SP
15/38.1 15/38.1 15/38.1
120.96/307.2 120.96/307.2 121/307.1
133.56/339.2 SKS 133.56/339.2 SKS
7.3/6.1 /27 .7 7.3/6.1/27.7 7.3/6.1/27.7
88 Octane Min. 88 Octane Min. 88 Octane Min.
Coil Spring IFS Coil Spring IFS Coil Spring IFS
Hydraulic Disc Hydraulic Disc Hydraulic Disc
Rear of Seat Rear of Seat Rear of Seat
Standard Standard Standard
Standard Standard Standard
Standard Standard Standard
High Temp Ind. Standard N/A
N/A Standard Option
Standard ESIDel
Option Standard Standard
Option Option Option
Standard Deluxe
Option Option Option
Standard Deluxe
Option Option Option
Option Option Option
8/94
13. MODELS AND SPECIFICATIONS
1988 Model Identification
Indy Sport Sprint
0880433 0880931
Engine Type Fan Cooled Twin Fan Cooled Twin
Displacement (cc) 339 339
Bore x Stroke (mm) 62 x 55.6 62 x 55.6
CarburetionfThrottle 2 Mikuni 2 Mikuni
Body VM30SS Slide VM30SS Slide
Oil Injected Standard Standard
Ignition COl COl
Alternator Output 12V 120W 12V 120W
Length (in.!cm.) 106.25/269.9 1021259.1
Width (in.!cm.) 41 .621105.7 40/101 .6
Height (in.!cm.) 42/106.7 44.5/113
Ski Stance (in.!cm.) 36.5/92.7 31/78.7
Track Width (in.!cm.) 15/38.1 15/38.1
Track Length Overall 120.96/307.2 108/274.3
(in.!cm.)
Fuel Capacity (U.S. 7.3/6.1 /27.7 7.5/6.2128.1
gal./lmp. gal./liters)
Recommended Fuel 88 Octane Min. 88 Octane Min.
Front Suspension Coil Spring IFS Mono Leaf
Brake Type Hydraulic Disc Mechanical Disc
Storage Rear of Seat Rear of Seat
Speedometer Standard Standard
Tachometer Option Option
Trip Odometer Standard N/A
Accessory Lights N/A N/A
Electric Start Option N/A
Handwarmers Option Option
Two-Up Seat N/A N/A
Backrest N/A N/A
Storage Rack Option Option
Tow Hitch Option Option
Star
0880927
Fan Cooled Single
244
72 x 60
1 Mikuni
VM30SS Slide
Standard
COl
12V 100W
102/259.1
40/101.6
44.5/113
31/78.7
15/38.1
108/274.3
7.5/6.2128.1
88 Octane Min.
Mono Leaf
Mechanical Disc
Rear of Seat
Option
Option
N/A
N/A
N/A
N/A
N/A
N/A
Option
Option
8/94 1.12
Long Track Star Trak
Reverse
0881549 0881027
Fan Cooled Twin Fan Cooled Single
432 244
67.72 x 60 72 x 60
2 Mikuni 1 Mikuni
VM34SS Slide VM30SS Slide
Standard Standard
COl COl
12V 120W 12V 100W
120.5/306.1 109/276.9
o
40/101.6 40/101.6
44.5/113 44.51113
31/78.7 31/78.7
15/38.1 15/38.1
148/376 133/337.8
7.5/6.2/28.1 7.5/6.2/28.1
88 Octane Min. 88 Octane Min.
Mono Leaf Mono Leaf
Mechanical Disc Mechanical Disc
Rack/Rear of Seat Rack/Rear of Seat
Standard Standard
Option Option o
N/A N/A
Neutral Ind. N/A
N/A N/A
Option N/A
N/A N/A
N/A N/A
Standard Standard
Standard Option
14. o
MODELS AND SPECIFICATIONS
1989 Model Identification
SERIAL NUMBER IDENTIFICATION
The machine serial number may be used as an aid in identifying machine model year. Referto the first digits in the serial number
for proper identification:
FIRST DIGITS
12
13
14
15
16
MODEL YEAR
1985
1986
1987
1988
1989
1989 MODEL DESIGNATION
YEAR DESIGNATION-----------;:=;:::JI~ ENGINE DESIGNATION
I 0 8 910 9 17
MODEL DESIGNATION _ _________ -'1
1989
MODEL DESIGNATION
NUMBERS (Chassis)
09 - Star/Sprint (ES)
10- StarTrak
1989
ENGINE DESIGNATION
NUMBERS
27 - EC25PS-Single FC
1989
ENGINE DESIGNATION
NUMBERS
59 - EC40PL-02-Twin LC
61 - EC50PM-01 -Twin FC
15 - LongTrak LTR
01 - Indy Trail SuperTrak
02 - Indy Trail Deluxe
31 - EC34-2PM-02-Twin FC ES
33 - EC34-2PM-01-03-Twin FC
49 - EC44-2PM-4100-Twin FC
58 - EC65PL-01-Triple LC
62 - EC50PM-02-Twin FC ES
64 - EC50PL-01-Twin LC
04 - Indy Sport
05 - Indy 133 SKS
06 - Indy Trail SP
07 - Indy 440, 500, 650
08 - Indy 500 Classic
24 Indy Sport GT
65 - EC50PL-02-Twin LC ES
MODEL NO. MADE IN U.S.A. PCLRRIS
PATENT NOTICE
SERIAL NO.
THIS VEHICLE CONFORMS TO ALL APPLICABLE U.S.
FEDERAL AND STATE REQUIREMENTS AND
CANADIAN FEDERAL MOTOR VEHICLE STANDARDS
IN EFFECT ON THE DATE OF MANUFACTURE.
MFD. DATE:
Mfd. by Polaris Industries L.P.
in Roseau, MN under one or more of the following patents:
U.S. Patents 3,605,51t 3,533,662 3,6t3,811
3,580,647 3,613,810 3,605,510
3,483,766 3,545,821 3,525,412
Patented Canada 882,491171 883 .694171
Canadian Rd. 34,573171 34 ,572171
These numbers should be referred to in any correspondence regarding warranty, service or replacement parts.
3,867,991
4,793,950
5,038,881
864,39417t
1,227,823/87
7072133
The machine model and serial number identification decal is located on the right front side of the tunnel. The serial number is
permanently stamped into the tunnel. The model number is embossed on the decal.
Whenever corresponding about an engine it is important that the engine model and serial numbers be called out. Laser
engraved model and serial numbers are located on the crankcase (intake side).
1.13 8/94
15. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
16. MODELS AND SPECIFICATIONS
1989 Model Identification
Engine Type
Displacement (cc)
Bore x Stroke (mm)
CarburetionfThrottle Body
Oil Injected
Ignition
Alternator Output
Length (in./cm.)
Width (in./cm.)
Height (in./cm.)
Ski Stance (in./cm.)
Track Width (in./cm.)
Track Length Overall (in./cm.)
Fuel Capacity (U.S. gal.llmp. gal./liters)
Recommended Fuel
Front Suspension
Brake Type
Storage
Speedometer
Tachometer
Trip Odometer
Accessory Lights
Electric Start
Handwarmers
Two-Up Seat
Backrest
Storage Rack
Tow Hitch
8/94
Indy 650
Indy 650 SKS
0890758
0890558
LC Triple
648
67.72 x 60
3 Mikuni
VM38SS Slide
Standard
COl
12V 120W
106.25/269.9
113/287 SKS
41.62/105.7
44/111.8
36.5/92.7
15/38.1
120.96/307.2
133.56/339.2 SKS
7.3/6.1 /27.7
88 Octane Min.
Coil Spring IFS
Liquid Cooled
Hydraulic Disc
Rear of Seat
Standard
Standard
Standard
High Temp Ind.
N/A
Standard
Option
Option
Option
Option
1.14
Indy 500
500SKS
0890764
0890564
LCTwin
488
72 x 60
2 Mikuni
VM38SS Slide
Standard
COl
12V 120W
106.25/269.9
113/287 SKS
41.62/105.7
44/111 .8
36.5/92.7
15/38.1
120.96/307.2
133.56/339.2 SKS
7.3/6.1/27.7
88 Octane Min.
Coil Spring IFS
Hydraulic Disc
Rear of Seat
Standard
Standard
Standard
High Temp Ind.
N/A
Option
Option
Option
Option
Option
Indy 500 Indy 500 SP
)
Classic
0890865 0890664
LCTwin LCTwin
488 488
72 x 60 72 x 60
2 Mikuni 2 Mikuni
VM38SS Slide VM38SS Slide
Standard Standard
COl COl
12V 120W 12V 120W
106.25/269.9 106.25/269.9
41.62/105.7 43.12/109.5
44/111.8 42/106.7
36.5/92.7 38/96.5
15/38.1 15/38.1
120.96/307.2 120.96/307.2
7.3/6.1/27.7 7.3/6.1 /27.7
88 Octane Min. 88 Octane Min.
Coil Spring IFS Coil Spring IFS
Hydraulic Disc Hydraulic Disc
Rear of Seat Rear of Seat
Standard Standard
Standard Standard o
Standard Standard
Standard N/A
Standard N/A
Standard Option
Option Option
Option Option
Option Option
Option Option
17. Indy 400 Indy Trail, SP
Deluxe, ES,
SKS
0890759 0890761/0890661/
0890262/0890762/
0890561
Engine Type LCTwin Fan Cooled Twin
Displacement (cc) 398 488
Bore x Stroke (mm) 65 x 60 72 x 60
CarburetionlThrottle Body 2 Mikuni 2 Mikuni
VM34SS Slide VM34SS Slide
Oil Injected Standard Standard
Ignition CDI CDI
Alternator Output 12V 120W 12V 120W
Length (in./cm.) 106.25/269.9 106.25/269.9
113/287 SKS
Width (in./cm.) 41 .62/105.7 41.62/105.7
43.12/109.5 SP
Height (in./cm.) 44/111.8 42/106.7
45/114.3 Del
Ski Stance (in./cm.) 36.5/92.7 36.5/92.7
38/96.5 SP
Track Width (in./cm.) 15/38.1 15/38.1
Track Length Overall 120.96/307.2 120.96/307.2
(in./cm.) 133.56/339.2 SKS
Fuel Capacity (U.S. 7.3/6.1/27.7 7.3/6.1/27.7
gal.llmp. gal.lliters)
Recommended Fuel 88 Octane Min. 88 Octane Min.
Front Suspension Coil Spring IFS Coil Spring IFS
Brake Type Hydraulic Disc Hydraulic Disc
Storage Rear of Seat Rear of Seat
Speedometer Standard Standard
Tachometer Standard Standard
Trip Odometer Standard Standard
Accessory Lights High Temp Ind. N/A
Electric Start N/A Option
Standard ES/Del
Handwarmers Option Standard
Two-Up Seat Option Option
Standard Deluxe
Backrest Option Option
Standard Deluxe
Storage Rack Option Option
Tow Hitch Option Option
1.15
MODELS AND SPECIFICATIONS
1989 Model Identification
Indy Trail Indy Sport Indy Sport GT
SuperTrak
0890161 0890433 0892433
Fan Cooled Twin Fan Cooled Twin Fan Cooled Twin
488 339 339
72 x 60 62.3 x 55.6 62.3 x 55.6
2 Mikuni 2 Mikuni 2 Mikuni
VM34SS Slide VM30SS Slide VM30SS Slide
Standard Standard Standard
CDI CDI CDI
12V 120W 12V 120W 12V 120W
128/325.1 106.25/269.9 118/299.7
41.62/105.7 41.62/105.7 41.62/105.7
45/114.3 42/106.7 45/114.3
36.5/92.7 36.5/92.7 36.5/92.7
15/38.1 15/38.1 15/38.1
156/396.2 120.96/307.2 141/358.1
7.3/6.1/27.7 7.3/6.1/27.7 7.3/6.1/27.7
88 Octane Min. 88 Octane Min. 88 Octane Min.
Coil Spring IFS Coil Spring IFS Coil Spring IFS
Mechanical Disc Hydraulic Disc Hydraulic Disc
Rack/Rear of Seat Rear of Seat Rack/Rear of Seat
Standard Standard Standard
Standard Option Option
Standard Standard Standard
N/A N/A N/A
Opt!on Option Option
Standard Option OlltiCh
Standard Option Standard
~
Standard Option Standard
Standard Option Standard
Standard Option Standard
8/94
18. MODELS AND SPECIFICATIONS
1989 Model Identification
Sprint ES
0890931
Engine Type Fan Cooled Twin
Displacement (cc) 339
Bore x Stroke (mm) 62.3 x 55.6
CarburetionfThrottle Body 2 Mikuni
VM30SS Slide
Oil Injected Standard
Ignition COl
Alternator Output 12V 120W
Length (in.lcm.) 1021259.1
Width (in.lcm.) 40/101.6
Height (in.lcm.) 44.5/113
Ski Stance (in.lcm.) 31/78.7
Track Width (in.lcm.) 15/38.1
Track Length Overall (in.lcm.) 108/274.3
Fuel Capacity (U.S. gal./lmp. gal.lliters) 7.5/6.2128.1
Recommended Fuel 88 Octane Min.
Front Suspension Mono Leaf
Brake Type Mechanical Disc
Storage Rear of Seat
Speedometer Standard
Tachometer Option
Trip Odometer N/A
Accessory Lights N/A
Electric Start Standard
Handwarmers Option
Two-Up Seat N/A
Backrest Option
Storage Rack Option
Tow Hitch Option
Star
0890927
Fan Cooled Single
244
72 x 60
1 Mikuni
VM30SS Slide
Standard
COl
12V 100W
1021259.1
40/101.6
44.5/113
31/78.7
15/38.1
108/274.3
7.5/6.2/28.1
88 Octane Min.
Mono Leaf
Mechanical Disc
Rear of Seat
Option
Option
N/A
N/A
N/A
N/A
N/A
N/A
Option
Option
8/94 1.16
Long Track Star Trak
Reverse
0891549 0891027
Fan Cooled Twin Fan Cooled Single
432 244
67.72 x 60 72 x 60
2 Mikuni 1 Mikuni
VM34SSSiide VM30SS Slide
Standard Standard
COl COl
12V 120W 12V 100W
120.5/306.1 109/276.9
40/101.6 40/101.6
44.5/113 44.5/113
31/78.7 31/78.7
15/38.1 15/38.1
148/376 133/337.8
7.5/6.2128.1 7.5/6.2128.1
88 Octane Min. 88 Octane Min.
Mono Leaf Mono Leaf
Mechanical Disc Mechanical Disc
Rack/Rear of Seat Rack/Rear of Seat
Standard Standard
Option Option
N/A N/A
N/A N/A
N/A N/A
Option N/A
N/A N/A
N/A N/A
Standard Standard
Standard Standard
[]
19. MODELS AND SPECIFICATIONS
1990 Model Identification
SERIAL NUMBER IDENTIFICATION
The machine serial number may be used as an aid in identifying machine model year. Referto the first digits in the serial number
for proper identification:
FIRST DIGITS
12
13
14
15
16
17
MODEL YEAR
1985
1986
1987
1988
1989
1990
1990 MODEL DESIGNATION
YEAR DESIGNATION-------~=:J.
I____,_, ENGINE DESIGNATION
I 0 9 01 0 9 17
MODEL DESIGNATION __________-----
1990
MODEL DESIGNATION
NUMBERS (Chassis)
09 - Star/Sprint (ES)
10 - StarTrak
15 - LongTrak LTR
01 - Indy Trail SuperTrak
02 - Indy Trail Deluxe
04 - Indy Sport
05 - Indy 133 SKS
06 - Indy Trail SP/500 SP
07 - Indy 440, 500, 650
08 - Indy 500 Classic
20 - WideTrak
24 Indy Sport GT
MODEL NO.
SERIAL NO.
1990
ENGINE DESIGNATION
NUMBERS
27 - EC25PS-Single FC
31 - EC34-2PM-02-Twin FC ES
33 - EC34-2PM-01-03-Twin FC
49 - EC44-2PM-41 OO-Twin FC
58 - EC65PL-01-Triple LC
1990
ENGINE DESIGNATION
NUMBERS
59 - EC40PL-02-Twin LC
61 - EC50PM-01/02-Twin FC
62 - EC50PM-03-Twin FC ES
64 - EC50PL-01/03-Twin LC
65 - EC50PL-02-Twin LC
MADE IN U,S,A. POLRRIS
PATENT NOTICE
Mfd. by Polaris Industries loP.
in Roseau, MN under one or more of the following patents:
U.S. Patents 3.605.511 3.533,662 3,613,811
3,580,647 3,613,810 3,605,510
3,483,766 3,545,821 3,525,412
3,867,991
4,793,950
5,038,881
THIS VEHICLE CONFORMS TO ALL APPLICABLE U,S.
FEDERAL AND STATE REQUIREMENTS AND
CANADIAN FEDERAL MOTOR VEHICLE STANDARDS
IN EFFECT ON THE DATE OF MANUFACTURE.
Patented Canada 882,491171 883,694171
Canadian Rd. 34,573171 34,572171
864,394171
1,227,823/87
MFD. DATE:
7072133
These numbers should be referred to in any correspondence regarding warranty, service or replacement parts.
The machine model and serial number identification decal is located on the right front side of the tunnel. The serial number is
permanently stamped into the tunnel. The model number is embossed on the decal.
Whenever corresponding about an engine it is important that the engine model and serial numbers be called out. Laser
engraved model and serial numbers are located on the crankcase (intake side).
1.17 8/94
20. MODELS AND SPECIFICATIONS
1990 Model Identification
Engine Type
Displacement (cc)
Bore x Stroke (mm)
CarburetionfThrottle Body
Oil Injected
Ignition
Alternator Output
Length (in./cm.)
Width (in./cm.)
Height (in./cm.)
Ski Stance (in./cm.)
Track Width (in./cm.)
Track Length Overall (in./cm.)
Fuel Capacity (U.S. gal./lmp. gal./liters)
Recommended Fuel
Front Suspension
Brake Type
Storage
Speedometer
Tachometer
Trip Odometer
Accessory Lights
Electric Start
Handwarmers
Two-Up Seat
Backrest
Storage Rack
Tow Hitch
8/94
650
650 SKS
0900758
0900558
LC Triple
648
67.72 x 60
3 Mikuni
VM38SS Slide
Standard
COl
12V 120W
106.25/269.9
113/287 SKS
41.62/105.7
44/111.8
36.5/92.7
15/38.1
120.96/307.2
133.56/339.2 SKS
7.3/6.1/27.7
88 Octane Min.
Coil Spring IFS
Liquid Cooled
Hydraulic Disc
Rear of Seat
Standard
Standard
Standard
High Temp Ind.
N/A
Standard
Option
Option
Option
Option
1.18
500 500 Classic 500SP
500SKS
0900764 0900865 0900664
0900564
LC Twin LC Twin LC Twin
488 488 488
72 x 60 72 x60 72 x 60
2 Mikuni 2 Mikuni 2 Mikuni
VM38SS Slide VM38SS Slide VM38SS Slide
Standard Standard Standard
COl COl COl
12V 200W 12V200W 12V 200W
106.25/269.9 106.25/269.9 106.25/269.9
113/287 SKS
o
41.62/105.7 41.62/105.7 43.12/109.5
44/111.8 44/111.8 42/106.7
36.5/92.7 36.5/92.7 38/96.5
15/38.1 15/38.1 15/38.1
120.96/307.2 120.96/307.2 120.96/307.2
133.56/339.2 SKS
7.3/6.1/27.7 7.3/6.1/27.7 7.3/6.1/27.7
88 Octane Min. 88 Octane Min. 88 Octane Min.
Coil Spring IFS Coil Spring IFS Coil Spring IFS
Hydraulic Disc HydrauliC Disc Hydraulic Disc
Rear of Seat Rear of Seat Rear of Seat
Standard Standard Standard
Standard Standard Standard
Standard Standard Standard
High Temp Ind. Standard N/A
Option Standard Option
Option Standard Option
Option Option Option
Option Option Option
Option Option Option
Option Option Option