The document describes vehicle models and specifications for 1985-1995. It provides details on model identification numbers, engine types, dimensions, features and specifications for each model year. Serial number identification by model year is also outlined to help identify vehicle year of manufacture.
2003 yamaha rx10 msh rx10rh rx10rsh snowmobile service repair manualfjjsjeusekkekm
This document is a service manual that provides instructions for periodic inspections, adjustments, repairs, and maintenance of various systems for a vehicle. It includes chapters covering general information, the cooling system, engine, power train, chassis, and electrical systems. Each chapter provides detailed procedures, specifications, and troubleshooting information for inspecting, removing, repairing, and installing components.
2003 toyota highlander service repair manualfjjsjeusekkekm
This document provides instructions on how to properly use the 2005 Highlander repair manual. It discusses the manual's layout and conventions including repair procedures, specifications, torque values, and precautions when working with supplemental restraint systems. Proper jacking, clip and fastener removal, vacuum hose and electrical connection procedures are described. The importance of using proper safety equipment and following warnings is emphasized throughout.
The document provides instructions for replacing the rear differential oil in a 2004 Toyota RAV4 with 4WD. It describes draining the old oil, filling with new oil of the specified type and viscosity, and tightening to the proper torque spec. It also includes diagrams showing oil level and components. Further sections describe procedures for differential removal and disassembly, component inspection and measurement, bearing removal, and torque specifications.
This document is a Toyota repair manual containing information about vehicle maintenance, preparation, specifications, and diagnostics. It includes sections on engine mechanical systems, emission control, cooling, lubrication, ignition, starting, charging, transmissions, suspension, brakes, steering, air conditioning and an alphabetical index. The document provides detailed procedures, specifications and troubleshooting information for repair technicians working on Toyota vehicles.
1996 polaris indy rxl snowmobile service repair manualfjjsjeusekkekm
This document provides publication numbers and service bulletin indexes for Polaris snowmobiles from 1994-1998. It lists the model, model number, owner's manual part number, parts manual part number, and other relevant documentation for each year. The document also provides indexes of service bulletins by number and year to allow technicians to quickly look up technical service information.
1989 yamaha viking vk 540 series snowmobile service repair manualfjjsjeusekkekm
The document provides a periodic maintenance table that outlines inspection and adjustment check points for a snowmobile. The table is divided into engine, drive/power train, and body sections. It specifies inspection and adjustment tasks to complete every 20, 40, or 80 hours of operation or 400, 800, or 1,600 km. Seasonal checks are also listed. Tasks include inspecting bolts, nuts, belts, brakes, tracks, filters, fluid levels, leaks, wear items, and performing idle speed, ignition timing and other adjustments.
1988 yamaha vmx1200 u c vmax service repair manualfjjsjeusekkekm
This document provides instructions for replacing the engine oil on a VMX12 motorcycle. It states that the engine should be warmed up for several minutes first to drain the oil fully. Then the oil pan should be placed under the drain bolt and the bolt loosened to drain the old oil. Once drained, the bolt should be tightened and new oil poured in through the filler opening. The level should then be checked on the dipstick.
2003 yamaha rx10 msh rx10rh rx10rsh snowmobile service repair manualfjjsjeusekkekm
This document is a service manual that provides instructions for periodic inspections, adjustments, repairs, and maintenance of various systems for a vehicle. It includes chapters covering general information, the cooling system, engine, power train, chassis, and electrical systems. Each chapter provides detailed procedures, specifications, and troubleshooting information for inspecting, removing, repairing, and installing components.
2003 toyota highlander service repair manualfjjsjeusekkekm
This document provides instructions on how to properly use the 2005 Highlander repair manual. It discusses the manual's layout and conventions including repair procedures, specifications, torque values, and precautions when working with supplemental restraint systems. Proper jacking, clip and fastener removal, vacuum hose and electrical connection procedures are described. The importance of using proper safety equipment and following warnings is emphasized throughout.
The document provides instructions for replacing the rear differential oil in a 2004 Toyota RAV4 with 4WD. It describes draining the old oil, filling with new oil of the specified type and viscosity, and tightening to the proper torque spec. It also includes diagrams showing oil level and components. Further sections describe procedures for differential removal and disassembly, component inspection and measurement, bearing removal, and torque specifications.
This document is a Toyota repair manual containing information about vehicle maintenance, preparation, specifications, and diagnostics. It includes sections on engine mechanical systems, emission control, cooling, lubrication, ignition, starting, charging, transmissions, suspension, brakes, steering, air conditioning and an alphabetical index. The document provides detailed procedures, specifications and troubleshooting information for repair technicians working on Toyota vehicles.
1996 polaris indy rxl snowmobile service repair manualfjjsjeusekkekm
This document provides publication numbers and service bulletin indexes for Polaris snowmobiles from 1994-1998. It lists the model, model number, owner's manual part number, parts manual part number, and other relevant documentation for each year. The document also provides indexes of service bulletins by number and year to allow technicians to quickly look up technical service information.
1989 yamaha viking vk 540 series snowmobile service repair manualfjjsjeusekkekm
The document provides a periodic maintenance table that outlines inspection and adjustment check points for a snowmobile. The table is divided into engine, drive/power train, and body sections. It specifies inspection and adjustment tasks to complete every 20, 40, or 80 hours of operation or 400, 800, or 1,600 km. Seasonal checks are also listed. Tasks include inspecting bolts, nuts, belts, brakes, tracks, filters, fluid levels, leaks, wear items, and performing idle speed, ignition timing and other adjustments.
1988 yamaha vmx1200 u c vmax service repair manualfjjsjeusekkekm
This document provides instructions for replacing the engine oil on a VMX12 motorcycle. It states that the engine should be warmed up for several minutes first to drain the oil fully. Then the oil pan should be placed under the drain bolt and the bolt loosened to drain the old oil. Once drained, the bolt should be tightened and new oil poured in through the filler opening. The level should then be checked on the dipstick.
Yale (e876) gdp230 dcs lift truck service repair manualfjjsjeusekkekm
The document provides instructions for raising and lowering the operator cab on a lift truck, as well as removing and installing the cab door. Key steps include:
1. Using the cab tilt hand pump or electric pump to raise or lower the cab until it locks in position.
2. Pulling the tilt latch release to fully raise or lower the cab.
3. Attaching lift straps and cushions to safely remove the cab door from its hinges and place it on the ground.
4. Reinstalling the cab door by lifting it back into position on the hinges and adjusting if needed.
Perkins 2000 series 2006 diesel engine(model 2006 tg1a)service repair manualfjjsjeusekkekm
This document provides instructions for servicing and repairing Perkins 2000 Series 6-cylinder diesel engines. It details procedures for removing and installing major engine components like the cylinder head, pistons, crankshaft, and fuel injection system. Safety precautions are also outlined. The document is intended as a workshop manual for mechanics working on these industrial diesel engines.
New holland we210 wheel loader service repair manualfjjsjeusekkekm
This document is a service manual for wheeled excavators. It contains 13 sections that cover safety precautions, machine controls and instruments, technical specifications, maintenance and repair procedures for the upper structure, undercarriage, front attachment, steering system, brake system, hydraulic system, electrical system, and electronics. The sections include diagrams, specifications, and step-by-step instructions for disassembling and assembling various machine components.
New holland d150 b crawler dozer service repair manualfjjsjeusekkekm
This document is a repair manual for a D150B crawler machine. It contains general torque specifications for various types of hardware, including decimal, metric, hydraulic fittings, and more. It also includes a table of contents that lists sections covering topics like the engine, fuel system, electrical components, tracks, power train, brakes, hydraulics, and mounted equipment. Each section provides repair and installation instructions as well as specifications and troubleshooting information. Schematics for hydraulic and electrical systems are located in the rear pocket.
New holland l225 skid steer loader service repair manualfjjsjeusekkekm
This document is a service manual for New Holland construction equipment models C227, C232, C238, L213, L215, L218, L220, L223, L225, and L230 compact track loaders and skid steer loaders. It contains sections on hydraulic, pneumatic, electrical and electronic systems, engines and fuel systems, transmissions, axles, brakes, steering, frames, cabs, user controls, safety systems, positioning, tool operation, hitches, excavation tools and couplings. The document provides specifications, diagrams and instructions for servicing and repairing components of these models.
Liebherr rl 52 rl52 pipe layer service repair manualfjjsjeusekkekm
This document provides guidelines for performing tests, adjustments, and repairs on LIEBHERR earthmoving equipment. All work may only be performed by qualified personnel who have received specialized training. Safety regulations and accident prevention measures must be strictly followed. The guidelines are intended to help ensure work can be performed safely without endangering personnel or third parties.
Liebherr a900 c zw litronic hydraulic excavator service repair manual sn 2103...fjjsjeusekkekm
This document provides safety instructions for operating a Liebherr A 900 C-ZW Litronic hydraulic excavator. Key points include:
- The excavator is intended for excavating, lifting, and transporting materials and is not for transporting people.
- Only authorized personnel should operate and maintain the machine and proper protective equipment must be worn.
- Precautions must be taken to prevent crushing, burns, and fires, including ensuring attachments are supported before working under them and avoiding contact with hot engine components.
- The machine must be transported securely and pressure lines depressurized before transport. A pre-operation inspection is required before putting the machine into service.
Kubota stv40 tractor service repair manualfjjsjeusekkekm
This document provides maintenance and safety guidelines for electrical components on tractors. It discusses proper handling of wiring, batteries, fuses, connectors, and circuit testers. Specific tips include securely tightening terminals, avoiding damaged wiring, matching fuse capacities, holding connector bodies to separate, and using sandpaper to remove rust from terminals. The document emphasizes taking safety precautions such as disconnecting negative battery cables first and recharging batteries in a ventilated area away from flames.
This shop manual provides service and repair information for Kubota L175, L210, L225, L225DT, and L260 tractor models. The manual includes an index listing components by model and section. Sections cover systems like brakes, clutch, engine, transmission, differential, hydraulics, and electrical. Specification tables provide details on tune-up procedures, fluid capacities, component clearances and sizes for each model.
Kubota f2880 front cut ride on mower service repair manualfjjsjeusekkekm
This document provides specifications and dimensions for several tractor models including the F2880 and F3680.
It includes specifications such as engine details, fuel and oil capacities, transmission types, dimensions, weights, tire sizes, and travel speeds.
Performance specifications like engine power, displacement, rated rpm, battery details, and PTO details are provided for each model. Dimensional information includes lengths, widths, heights, wheelbases, ground clearances, and tread sizes.
Liebherr r944 c hydraulic excavator service repair manualfjjsjeusekkekm
The document is a service manual for Liebherr hydraulic excavators that contains:
1. Technical data, design descriptions, and service/setup instructions for maintenance and repairs.
2. Sections covering the engine, hydraulic and electrical systems, swing gear, track components and other parts.
3. Safety symbols and instructions for working on the machines.
The manual is intended to assist customer support but does not replace technical training. It includes schematics, diagrams and detailed views of machine units.
Liebherr r916 1301 classic hydraulic excavator service repair manualfjjsjeusekkekm
The document is a service manual for Liebherr hydraulic excavators. It contains 18 sections that provide technical data, design descriptions, and service/setup instructions for the machines. The manual is intended to assist customer support but does not replace proper training. It includes symbols to identify dangers, requirements, and expected results. The sections cover general information, tools, technical specifications, the engine/motor, couplings, hydraulic and electrical systems, swing/travel components, and options like the cab.
Liebherr lh60 m hydraulic excavator service repair manualfjjsjeusekkekm
This document provides safety warnings and instructions for operating a hydraulic excavator. It outlines hazards associated with the machine and stresses the importance of following safety precautions to prevent injury. Specific dangers are indicated by warning signs on the machine. The document also defines the designated and proper uses of the excavator, which include tasks like loosening and transporting materials. It notes that any uses other than those defined or not in accordance with operating manuals would be considered improper.
Liebherr er 912 hydraulic excavator service repair manualfjjsjeusekkekm
The document is a service manual that provides technical data, maintenance guidelines, and information on systems for hydraulic excavators models ER 900-942. It covers general information, tools, the engine, coupling and splitterbox, hydraulic system, hydraulic components, electrical system, swing gear, swing ring, travel gear, track components, undercarriage and uppercarriage attachments, cab heater and air conditioning. The manual is intended to assist with maintenance and repairs for the excavator models.
Jcb jcb305, js305 excavator service repair manual (from 2452201 to 2452500)fjjsjeusekkekm
This document is a service manual for an excavator model JCB305, JS305. It contains instructions for servicing and repairing components of the excavator, listed by system (e.g. engine, hydraulic system, electrical system). The manual provides technical specifications, diagrams, removal and installation instructions, and checking/inspection procedures for parts like the engine, pistons, connecting rods, and more. Safety warnings are included to treat the manual as part of the machine and follow all instructions to avoid injury during operation and maintenance.
Jcb jcb305, js305 excavator service repair manual (from 2452101 to 2452200)fjjsjeusekkekm
This document is a service manual for an excavator model JCB305, JS305. It contains instructions for servicing and repairing components of the excavator, listed by system (e.g. engine, hydraulic system, electrical system). The manual provides technical specifications, diagrams, removal and installation instructions, and checking/inspection procedures for parts like the engine, pistons, connecting rods, and more. Safety warnings are included to treat the manual as part of the machine and follow all instructions to avoid injury during operation and maintenance.
Jcb 1253, 1202, 1553, 1554 liftall service repair manual from 1900650 to 1902499fjjsjeusekkekm
The document is a service manual for the Liftall 1253/1202/1553/1554 machines. It contains sections covering general information such as machine identification, load charts, torque specifications, and service tools. It also includes sections specific to the body and framework, electrics, hydraulics, and engine of the machines. The manual provides information and specifications to assist with maintenance and repair of the Liftall models.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Yale (e876) gdp230 dcs lift truck service repair manualfjjsjeusekkekm
The document provides instructions for raising and lowering the operator cab on a lift truck, as well as removing and installing the cab door. Key steps include:
1. Using the cab tilt hand pump or electric pump to raise or lower the cab until it locks in position.
2. Pulling the tilt latch release to fully raise or lower the cab.
3. Attaching lift straps and cushions to safely remove the cab door from its hinges and place it on the ground.
4. Reinstalling the cab door by lifting it back into position on the hinges and adjusting if needed.
Perkins 2000 series 2006 diesel engine(model 2006 tg1a)service repair manualfjjsjeusekkekm
This document provides instructions for servicing and repairing Perkins 2000 Series 6-cylinder diesel engines. It details procedures for removing and installing major engine components like the cylinder head, pistons, crankshaft, and fuel injection system. Safety precautions are also outlined. The document is intended as a workshop manual for mechanics working on these industrial diesel engines.
New holland we210 wheel loader service repair manualfjjsjeusekkekm
This document is a service manual for wheeled excavators. It contains 13 sections that cover safety precautions, machine controls and instruments, technical specifications, maintenance and repair procedures for the upper structure, undercarriage, front attachment, steering system, brake system, hydraulic system, electrical system, and electronics. The sections include diagrams, specifications, and step-by-step instructions for disassembling and assembling various machine components.
New holland d150 b crawler dozer service repair manualfjjsjeusekkekm
This document is a repair manual for a D150B crawler machine. It contains general torque specifications for various types of hardware, including decimal, metric, hydraulic fittings, and more. It also includes a table of contents that lists sections covering topics like the engine, fuel system, electrical components, tracks, power train, brakes, hydraulics, and mounted equipment. Each section provides repair and installation instructions as well as specifications and troubleshooting information. Schematics for hydraulic and electrical systems are located in the rear pocket.
New holland l225 skid steer loader service repair manualfjjsjeusekkekm
This document is a service manual for New Holland construction equipment models C227, C232, C238, L213, L215, L218, L220, L223, L225, and L230 compact track loaders and skid steer loaders. It contains sections on hydraulic, pneumatic, electrical and electronic systems, engines and fuel systems, transmissions, axles, brakes, steering, frames, cabs, user controls, safety systems, positioning, tool operation, hitches, excavation tools and couplings. The document provides specifications, diagrams and instructions for servicing and repairing components of these models.
Liebherr rl 52 rl52 pipe layer service repair manualfjjsjeusekkekm
This document provides guidelines for performing tests, adjustments, and repairs on LIEBHERR earthmoving equipment. All work may only be performed by qualified personnel who have received specialized training. Safety regulations and accident prevention measures must be strictly followed. The guidelines are intended to help ensure work can be performed safely without endangering personnel or third parties.
Liebherr a900 c zw litronic hydraulic excavator service repair manual sn 2103...fjjsjeusekkekm
This document provides safety instructions for operating a Liebherr A 900 C-ZW Litronic hydraulic excavator. Key points include:
- The excavator is intended for excavating, lifting, and transporting materials and is not for transporting people.
- Only authorized personnel should operate and maintain the machine and proper protective equipment must be worn.
- Precautions must be taken to prevent crushing, burns, and fires, including ensuring attachments are supported before working under them and avoiding contact with hot engine components.
- The machine must be transported securely and pressure lines depressurized before transport. A pre-operation inspection is required before putting the machine into service.
Kubota stv40 tractor service repair manualfjjsjeusekkekm
This document provides maintenance and safety guidelines for electrical components on tractors. It discusses proper handling of wiring, batteries, fuses, connectors, and circuit testers. Specific tips include securely tightening terminals, avoiding damaged wiring, matching fuse capacities, holding connector bodies to separate, and using sandpaper to remove rust from terminals. The document emphasizes taking safety precautions such as disconnecting negative battery cables first and recharging batteries in a ventilated area away from flames.
This shop manual provides service and repair information for Kubota L175, L210, L225, L225DT, and L260 tractor models. The manual includes an index listing components by model and section. Sections cover systems like brakes, clutch, engine, transmission, differential, hydraulics, and electrical. Specification tables provide details on tune-up procedures, fluid capacities, component clearances and sizes for each model.
Kubota f2880 front cut ride on mower service repair manualfjjsjeusekkekm
This document provides specifications and dimensions for several tractor models including the F2880 and F3680.
It includes specifications such as engine details, fuel and oil capacities, transmission types, dimensions, weights, tire sizes, and travel speeds.
Performance specifications like engine power, displacement, rated rpm, battery details, and PTO details are provided for each model. Dimensional information includes lengths, widths, heights, wheelbases, ground clearances, and tread sizes.
Liebherr r944 c hydraulic excavator service repair manualfjjsjeusekkekm
The document is a service manual for Liebherr hydraulic excavators that contains:
1. Technical data, design descriptions, and service/setup instructions for maintenance and repairs.
2. Sections covering the engine, hydraulic and electrical systems, swing gear, track components and other parts.
3. Safety symbols and instructions for working on the machines.
The manual is intended to assist customer support but does not replace technical training. It includes schematics, diagrams and detailed views of machine units.
Liebherr r916 1301 classic hydraulic excavator service repair manualfjjsjeusekkekm
The document is a service manual for Liebherr hydraulic excavators. It contains 18 sections that provide technical data, design descriptions, and service/setup instructions for the machines. The manual is intended to assist customer support but does not replace proper training. It includes symbols to identify dangers, requirements, and expected results. The sections cover general information, tools, technical specifications, the engine/motor, couplings, hydraulic and electrical systems, swing/travel components, and options like the cab.
Liebherr lh60 m hydraulic excavator service repair manualfjjsjeusekkekm
This document provides safety warnings and instructions for operating a hydraulic excavator. It outlines hazards associated with the machine and stresses the importance of following safety precautions to prevent injury. Specific dangers are indicated by warning signs on the machine. The document also defines the designated and proper uses of the excavator, which include tasks like loosening and transporting materials. It notes that any uses other than those defined or not in accordance with operating manuals would be considered improper.
Liebherr er 912 hydraulic excavator service repair manualfjjsjeusekkekm
The document is a service manual that provides technical data, maintenance guidelines, and information on systems for hydraulic excavators models ER 900-942. It covers general information, tools, the engine, coupling and splitterbox, hydraulic system, hydraulic components, electrical system, swing gear, swing ring, travel gear, track components, undercarriage and uppercarriage attachments, cab heater and air conditioning. The manual is intended to assist with maintenance and repairs for the excavator models.
Jcb jcb305, js305 excavator service repair manual (from 2452201 to 2452500)fjjsjeusekkekm
This document is a service manual for an excavator model JCB305, JS305. It contains instructions for servicing and repairing components of the excavator, listed by system (e.g. engine, hydraulic system, electrical system). The manual provides technical specifications, diagrams, removal and installation instructions, and checking/inspection procedures for parts like the engine, pistons, connecting rods, and more. Safety warnings are included to treat the manual as part of the machine and follow all instructions to avoid injury during operation and maintenance.
Jcb jcb305, js305 excavator service repair manual (from 2452101 to 2452200)fjjsjeusekkekm
This document is a service manual for an excavator model JCB305, JS305. It contains instructions for servicing and repairing components of the excavator, listed by system (e.g. engine, hydraulic system, electrical system). The manual provides technical specifications, diagrams, removal and installation instructions, and checking/inspection procedures for parts like the engine, pistons, connecting rods, and more. Safety warnings are included to treat the manual as part of the machine and follow all instructions to avoid injury during operation and maintenance.
Jcb 1253, 1202, 1553, 1554 liftall service repair manual from 1900650 to 1902499fjjsjeusekkekm
The document is a service manual for the Liftall 1253/1202/1553/1554 machines. It contains sections covering general information such as machine identification, load charts, torque specifications, and service tools. It also includes sections specific to the body and framework, electrics, hydraulics, and engine of the machines. The manual provides information and specifications to assist with maintenance and repair of the Liftall models.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
2. MODELS AND SPECIFICATIONS
1985 Model Identification
SERIAL NUMBER IDENTIFICATION
The machine serial number may be used as an aid in identifying machine model year. Refer to the first digits inthe serial number
for proper identification:
FIRST DIGITS MODEL YEAR
12 1985
1985 MODEL DESIGNATION
YEAR DESIGNATION--------;=:;=::l;I:--:;-, ENGINE DESIGNATION
I 0 8 510 9 17
MODEL DESIGNATION __________-----'
1985
MODEL DESIGNATION
NUMBERS (Chassis) .
07 - Indy Trail, 400, 600
08 - Indy 600 SE
09 - Star
13- SS
14 - LongTrack
1985
ENGINE DESIGNATION
NUMBERS
27 - EC25PS-Single FC
43 - EC44-2PM-2100-Twin FC
49 - EC44-2PM-Twin FC
57 - EC60PL-02-Three LC
59 - EC40PL-02-Twin LC
MODEL. NUMBER MACHINE DESCRIPTION MODEL NUMBER MACHINE DESCRIPTION
0850927
0851349
0850743
0850759
Star 244cc Single FC
SS 432cc Twin FC
Indy Trail 432cc Twin FC
Indy 400. 398cc Twin LC
0850757
0850847
0851449
Indy 600 596cc Three LC
Indy 600 SE 597cc Three LC
LongTrack 432cc Twin FC
MODEL NO. MADE IN U.S.A. POLRRIS
PATENT NOTICE
SERIAL NO.
THIS VEHICLE CONFORMS TO ALL APPLICABLE U.S.
FEDERAL AND S ,ATE REr'l1I1REMENTS AND
CANADIAN FEDERAL MC- - o-ilCLE STANDARDS
IN EFFECT ON THE DATE C, J FACTURE.
MFD. DATE:
MId. by Polaris Industries L.P.
in Roseau, MN under one or more of the following patents:
U.S, Patents 3,605,511 3,533,662 3,613,811
3,580,647 3,613,810 3,605,510
3,483,766 3,545,821 3,525,412
Patented Canada 662,491n1 883,694n1
Canadian Rd, 34,573n1 34,572171
3,867,991
4,793,950
5,038,881
864,394n1
1,227,823/87
7072133
These numbers should be referred to in any correspondence regarding warranty, service or replacement parts.
The machine model and serial number identification decal is located on the right front side of the tunnel. The serial number is
permanently stamped into the tunnel. The model number is embossed on the decal.
Whenever corresponding about an engine it is important that the engine model and serial numbers be called out. Laser
engraved model and serial numbers are located on the crankcase (intake side).
1.1 8/94
"
3. MODELS AND SPECIFICATIONS
1985 Model Identification
600SE
0850857
Engine Type LC Triple
Displacement (cc) 597
Bore x Stroke (mm) 65 x 60
CarburetionlThrottle Body 3 Mikuni
VM38SS Slide
Oil Injected Standard
Ignition COl
Alternator Output 12V 120W
Length (in./cm.) 106.25/269.7
Width (in./cm.) 41 .62/105.6
Height (in./cm.) 31.5/79.9
Ski Stance (in./cm.) 36.5/92.7
Track Width (in./cm.) 15/38.1
Track Length Overall (in./cm.) 121/307.1
Fuel Capacity (U.S. gal./lmp. gal./liters) 7/5.8/26.5
Recommended Fuel 88 Octane Min.
Front Suspension Coil Spring IFS
Chrome Trailing Arms
Brake Type Liquid Cooled
Hydraulic Disc
Storage Rear of Seat
Speedometer Standard
Tachometer Standard
Trip Odometer Standard
Accessory Lights Temp
Electric Start N/A
Handwarmers Option
Two-Up Seat N/A
Backrest N/A
Storage Rack Option
Tow Hitch Option
8/94 1.2
600
0850757
LC Triple
597
65 x 60
3 Mikuni
VM38SS Slide
Standard
COl
12V 120W
106.25/269.7
41.62/105.6
31.5/79.9
36.5/92.7
15/38.1
121/307.1
7/5.8/26.5
88 Octane Min.
Coil Spring IFS
Liquid Cooled
Hydraulic Disc
Rear of Seat
Standard
Standard
Standard
Temp
·N/A
Option
N/A
N/A
Option
Option
400 Long Track
0850759 0851449
LC Twin Fan Cooled Twin
398 432
65 x 60 67.62 x 60
2 Mikuni 1 Mikuni
VM34SS Slide VM30SS Slide
Standard Standard
COl COl
12V 120W 12V 120W
106.25/269.7 120.25/305.2
41 .62/105.6 40/101.5
31.5/79.9 33/83.7
36.5/92.7 31/78.7
15/38.1 15/38.1
121/307.1 148/375.6
7/5.8/26.5 5.4/4.5/20
88 Octane Min. 88 Octane Min.
Coil Spring IFS Mono Leaf
Liquid Cooled Mechanical Disc
Hydraulic Disc
Rear of Seat Rear of Seat
Storage Rack
Standard Standard
Standard Option oStandard Standard
Temp N/A
N/A N/A
Option Option
N/A N/A
N/A N/A
Option Standard
Option Standard
4. r
Engine Type
Displacement (cc)
Bore x Stroke (mm)
Carl;>uretionfThrottle Body
Oil Injected
Ignition
Alternator Output
Length (in.!cm.)
Width (in.!cm.)
Height (in.!cm.)
Ski Stance (in.!cm.)
Track Width (in.!cm.)
Track Length Overall (in.!cm.)
Fuel Capacity (U.S. gal.llmp. gal./liters)
Recommended Fuel
Front Suspension
Brake Type
Storage
Speedometer
Tachometer
G Trip Odometer
Accessory Lights
Electric Start
Handwarmers
Two-Up Seat
Backrest
Storage Rack
Tow Hitch
1.3
MODELS AND SPECIFICATIONS
1985 Model Identification
. ~.
Indy Trail SS Star
0850743 0851349 0850927
Fan Cooled Twin Fan Cooled Twin Fan Cooled Single
432 432 244
67.62 x 60 67.72 x 60 72 x 60
1 Mikuni 1 Mikuni 1 Mikuni
VM34SS Slide VM34SS Slide VM30SS Slide
Standard Standard Standard
COl COl COl
12V 120W 12V 120W 12V 100W
106.25/269.7 102/258.9 102/258.9
41 .62/105.6 40/101.5 40/101 .5
31.5/83.7 33/83.7 33/83.7
36.5/92.7 31/78.7 31/78.7
15/38.1 15/38.1 15/38.1
121/307.1 120/304.6 108/274.1
7/5.8/26.5 6.8/5.7/25.7 5.414.5120
88 Octane Min. 88 Octane Min. 88 Octane Min.
Coil Spring IFS Mono Leaf Mono Leaf
Hydraulic Disc Mechanical Disc Mechanical Disc
Rear of Seat Rear of Seat Rear of Seat
Standard Standard Option
Standard Standard Option
Standard Standard Option
N/A N/A N/A
Option Option N/A
Standard Option N/A
N/A N/A N/A
N/A N/A N/A
Option N/A N/A
Option Option Option
8/94
5. MODELS AND SPECIFICATIONS
·1986 Model Identification
SERIAL NUMBER IDENTIFICATION
The machine serial number may be used as an aid in identifying machine model year. Referto the first digits in the serial number
for proper identification:
FIRST DIGITS
12
13
MODEL YEAR
1985
1986
1986 MODEL DESIGNATION
YEAR DESIGNATIONI--- - - ----;=::;::=lI:---=1 ENGINE DESIGNATION
I 0 8 610 9 17
MODEL DESIGNATION _ _ _ _ _ _ _ _ _ _ ---'1
1986
MODEL DESIGNATION
NUMBERS (Chassis)
07 - Indy Trail, 400, 600
08 - Indy 600 LE
09 - Star/Sprint 340 (ES)
13 - SS
14 - LongTrack
MODEL NO.
SERIAL NO.
1986
ENGINE DESIGNATION
NUMBERS
27 - EC25PS-Single FC
31 - EC34-2PM-01 -Twin FC (ES)
33 - EC34-2PM-02-Twin FC
49 - EC44-2PM-5100-Twin FC
57 - EC60PL-02-Triple LC
1986
ENGINE DESIGNATION
NUMBERS
59 - EC40PL-02-Twin LC
61 - EC50PM-01-Twin FC
MADE IN U.S.A. PDLRRIS
PATENT NOTICE
Mfd. by Polaris Industries L.P.
THIS VEHICLE CONFORMS TO ALL APPLICABLE U.S.
FEDERAL AND STATE REQUIREMENTS AND
CANADIAN FEDERAL MOTOR VEHICLE STANDARDS
IN EFFECT ON THE DATE OF MANUFACTURE.
in Roseau. MN under one or more of the following patents:
U.S. Patents 3.605.511 3.533.662 3,613,811
3,580.647 3,613,810 3,605,510
3,483,766 3,545,821 3,525,412
Patented Canada 882,491171 883,694171
Canadian Rd. 34,573171 34,572171
MFD. DATE:
These numbers should be referred to in any correspondence regarding warranty, service or replacement parts.
3,867,991
4,793,950
5,038,881
864,394171
1,227,823187
7072133
The machine model and serial number identification decal is located on the right front side of the tunnel. The serial number is
permanently stamped into the tunnel. The model number is embossed on the decal.
Whenever corresponding about an engine it is important that the engine model and serial numbers be called out. Laser
engraved model and serial numbers are located on the crankcase (intake side).
8/94 1.4
,,
o
6. 600 LE
0860857
Engine Type LC Triple
Displacement (cc) 597
Bore x Stroke (mm) 65 x 60
CarburetionfThrottle Body 3 Mikuni
VM38SS Slide
Oil Injected Standard
Ignition COl
Alternator Output 12V 120W
Length (in./cm.) 106.25/269.7
Width (in./cm.) 41.62/105.6
Height (in./cm.) 31.5/79.9
Ski Stance (in./cm.) 36.5/92.7
Track Width (in./cm.) 15/38.1
Track Length Overall (in./cm.) 121/307.1
Fuel Capacity (U.S. gaL/Imp. gaL/liters) 7/5.8/26.5
Recommended Fuel 88 Octane Min.
Front Suspension Coil Spring IFS
Chrome Trailing Arm
Brake Type Liquid Cooled
Hydraulic Disc
Storage Rear of Seat
Speedometer Standard
Tachometer Standard
Trip Odometer Standard
- -
Accessory Lights Temp
Electric Start N/A
Handwarmers Option
Two-Up Seat N/A
Backrest N/A
Storage Rack Option
Tow Hitch Option
1.5
MODELS AND SPECIFICATIONS
1986 Model Identification
600 400 Long Track
0860757 0860759 0861449
LC Triple LC Twin Fan Cooled Twin
597 398 432
65 x 60 65 x 60 66.72 x 60
3 Mikuni 2 Mikuni 1 Mikuni
VM38SS Slide VM34SS Slide VM30SS Slide
Standard Standard Standard
COl COl COl
12V 120W 12V 120W 12V 120W
106.25/269.7 106.25/269.7 120.25/305.2
41 .62/105.6 41 .62/105.6 40/101.5
31.5/79.9 31 .5/79.9 33/83.7
36.5/92.7 36.5/92.7 31/78.7
15/38.1 15/38.1 15/38.1
121/307.1 121/307.1 148/375.6
7/5.8/26.5 7/5.8/26.5 7.5/6.2/28
88 Octane Min. 88 Octane Min. 88 Octane Min.
Coil Spring IFS Coil Spring IFS Mono Leaf
Liquid Cooled Liquid Cooled Mechanical Disc
Hydraulic Disc Hydraulic Disc
Rear of Seat Rear of Seat Rear of Seat
Storage Rack
Standard Standard Standard
Standard Standard Option
Standard Standard Standard
Temp Temp N/A
N/A N/A N/A
Option Option Option
N/A N/A N/A
N/A N/A N/A
Option Option Standard
Option Option Standard
8/94
7. MODELS AND SPECIFICATIONS
1986 Model Identification
Indy Trail SS
0860761 0861349
Engine Type Fan Cooled Twin Fan Cooled Twin
Displacement (cc) 488 432
Bore x Stroke (mm) 72 x 60 67.72 x 60
CarburetionfThrottle 2 Mikuni 1 Mikuni
Body VM34SS Slide VM34SS Slide
Oil Injected Standard Standard
Ignition COl COl
Alternator Output 12V 120W 12V 120W
Length (in./cm.) 106.25/269.7 102/258.9
Width (in./cm.) 41.62/105.6 40/101.5
Height (in./cm.) 31 .5/79.9 33/83.7
Ski Stance (in./cm.) 36.5/92.7 31/78.7
Track Width (in./cm.) 15/38.1 15/38.1
Track Length Overall 121/307.1 120/304.6
(in./cm.)
Fuel Capacity (U.S. 7/5.8/26.5 7.5/6.2/28
gal./lmp. gal./liters)
Recommended Fuel 88 Octane Min. 88 Octane Min.
Front Suspension Coil Spring IFS Mono Leaf
Brake Type Hydraulic Disc Mechanical Disc
Storage Rear of Seat Rear of Seat
Speedometer Standard Standard
Tachometer Standard Standard
Trip Odometer Standard Standard
Accessory Lights N/A N/A
Electric Start Option Option
Handwarmers Standard Option
Two-Up Seat N/A N/A
Backrest N/A N/A
Storage Rack Option N/A
Tow Hitch Option Option
8/94 1.6
oSprint Sprint ES Star
0860933 0860931 0860927
Fan Cooled Twin Fan Cooled Twin Fan Cooled Single
339 339 244
62 x 55.6 62 x 55.6 72 x 60
2 Mikuni 2 Mikuni 1 Mikuni
VM30SS Slide VM30SS Slide VM30SS Slide
Standard Standard Standard
COl COl COl
12V 120W 12V 120W 12V 100W
102/258.9 102/258.9 102/258.9
40/101.5 40/101.5 40/101.5
33/83.7 33/83.7 33/83.7
31/78.7 31/78.7 31/78.7
15/38.1 15/38.1 15/38.1
108/274.1 108/274.1 108/274.1
5.414.5120 5.4/4.5/20 5.4/4.5/20
88 Octane Min. 88 Octane Min. 88 Octane Min.
Mono Leaf Mono Leaf Mono Leaf
Mechanical Disc Mechanical Disc Mechanical Disc
Rear of Seat Rear of Seat Rear of Seat
Option Standard Option
Option Standard Option
Option Standard Option
N/A N/A N/A
N/A Standard N/A
Option Option N/A
N/A N/A N/A
N/A N/A N/A
N/A N/A N/A
Option Option Option
8. MODELS AND SPECIFICATIONS
1987 Model Identification
SERIAL NUMBER IDENTIFICATION
The machine serial number may be used as an aid in identifying machine model year. Referto the first digits in the serial number
for proper identification:
FIRST DIGITS
12
13
14
MODEL YEAR
1985
1986
1987
1987 MODEL DESIGNATION
YEAR DESIGNATIONI---------,:=:;:::J,I:--::l ENGINE DESIGNATION
I 0 8 710 9 17
MODEL DESIGNATION __________----'
1987
MODEL DESIGNATION
NUMBERS (Chassis)
09 - Star/Sprint 340 (ES)
10- StarTrak
1987
ENGINE DESIGNATION
NUMBERS
27 - EC25PS-Single FC
1987
ENGINE DESIGNATION
NUMBERS
59 - EC40PL-02-Twin LC
61 - EC50PM-01-Twin FC
14 - LongTrack
31 - EC34-2PM-02-Twin FC ES
33 - EC34-2PM-01 -03-Twin FC
49 - EC44-2PM-5100-Twin FC
57 - EC60PL-02-Triple LC
62 - EC50PM-02-Twin FC ES
15 - Long Track RLR
04 - Indy Sport
05 -Indy 133 SKS
07 - Indy Trail, 400, 600
MODEL NO. MADE IN U.S.A. PDLRRIS
PATENT NOTICE
SERIAL NO.
THIS VEHICLE CONFORMS TO ALL APPLICABLE u.s.
FEDERAL AND STATE REQUIREMENTS AND
CANADIAN FEDERAL MOTOR VEHICLE STANDARDS
IN EFFECT ON THE DATE OF MANUFACTURE.
MFD. DATE:
Mfd. by Polaris Industries loP.
in Roseau. MN under one or more of the following patents:
U.S. Patents 3.605.511 3.533.662 3.613.811
3.580.647 3.613.810 3.605.510
3.483.766 3.545.821 3.525.412
Patented Canada 882,491171 883.694f71
Canadian Rd. 34.573f71 34.572f71
These numbers should be referred to in any correspondence regarding warranty, service or replacement parts.
3.867.991
4.793.950
5.038.881
864.394171
1.227.823/87
7072133
The machine model and serial number identification decal is located on the right front side of the tunnel. The serial number is
permanently stamped into the tunnel. The model number is embossed on the decal.
Whenever corresponding about an engine it is important that the engine model and serial numbers be called out. Laser
engraved model and serial numbers are located on the crankcase (intake side).
1.7 8/94
9. MODELS AND SPECIFICATIONS
1987 Model Identification
Engine Type
Displacement (cc)
Bore x Stroke (mm)
CarburetionlThrottle Body
Oil Injected
Ignition
Alternator Output
Length (in.lcm.)
Width (in.lcm.)
Height (in.lcm.)
Ski Stance (in.lcm.)
Track Width (in./cm.)
Track Length Overall (in./cm.)
Fuel Capacity (U.S. gal./lmp. gal./liters)
Recommended Fuel
Front Suspension
Brake Type
Storage
Speedometer
Tachometer
Trip Odometer
Accessory Lights
Electric Start
Handwarmers
Two-Up Seat
Backrest
Storage Rack
Tow Hitch
8/94
Indy 600
0870757
LC Triple
597
65 x 60
3 Mikuni
VM38SS Slide
Standard
COl
12V 120W
109/276.6
41 .62/105.6
33/83.7
36.5/92.7
15/38.1
121/307.1
7/5.8/26.5
88 Octane Min.
Coil Spring IFS
Liquid Cooled
Hydraulic Disc
Rear of Seat
Standard
Standard
Standard
Temp
N/A
Option
N/A
N/A
Option
Option
1.8
Indy 400
400SKS
0870759
0870559
LCTwin
398
65 x 60
2 Mikuni
VM34SS Slide
Standard
COl
12V 120W
109/276.6
113/286.8 SKS
41.62/105.6
33/83.7
36.5/92.7
15/38.1
121/307.1
133.5/338.8
7/5.8/26.5
88 Octane Min.
Coil Spring IFS
Liquid Cooled
Hydraulic Disc
Rear of Seat
Standard
Standard
Standard
Temp
N/A
Option
N/A
N/A
Option
Option
Indy Trail Long Track
Trail ES I SKS LTR
0870761 0871449
0870762/0870561 0871549
Fan Cooled Twin Fan Cooled Twin
488 432
72 x 60 67.72 x 60
2 Mikuni 1 Mikuni
VM34SS Slide VM30SS Slide
Standard Standard
COl COl
12V 120W 12V 120W
109/276.6 120.25/305.2
.,
113/286.8 SKS
41 .62/105.6 40/101.5
33/83.7 33/83.7 .
36.5/92.7 31/78.7
15/38.1 15/38.1
121/307.1 148/375.6
133.5/338.8
7/5.8/26.5 7.5/6.2/28
88 Octane Min. 88 Octane Min.
Coil Spring IFS Mono Leaf
Hydraulic Disc Mechanical Disc
Rear of Seat Rear of Seat
Standard Standard
Standard Option
Standard Standard
N/A N/A
Option N/A
Standard ES
Standard Option
N/A N/A
N/A N/A
Option Standard
Option Standard
10. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
11. Indy Sport
0870433
Engine Type Fan Cooled Twin
Displacement (cc) 339
Bore x Stroke (mm) 62 x 55.6
CarburetionlThrottle Body 2 Mikuni
VM30SS Slide
Oil Injected Standard
Ignition COl
Alternator Output 12V 120W
Length (in./cm.) 109/276.6
Wid1h (in./cm.) 41.62/105.6
Height (in./cm.) 33/83.7
Ski Stance (in./cm.) 36.5/92.7
Track Width (in./cm.) 15/38.1
Track Length Overall (in./cm.) 121/307.1
Fuel Capacity (U.S. gaL/Imp. gal./liters) 7/5.8/26.5
Recommended Fuel 88 Octane Min.
Front Suspension Coil Spring IFS
Brake Type Liquid Cooled
Hydraulic Disc
c
Storage Rear of Seat
Speedometer Standard
Tachometer Option
Trip Odometer Standard
Accessory Lights N/A
Electric Start Option
Handwarmers Option
Two-Up Seat N/A
Backrest N/A
Storage Rack Option
Tow Hitch Option
1.9
MODELS AND SPECIFICATIONS
1987 Model Identification
Sprint Star Star Trak
Sprint ES
08"10933 0870927 0871027
0870931
Fan Cooled Twin Fan Cooled Single Fan Cooled Single
339 244 244
62 x 55.6 72 x 60 72 x 60
2 Mikuni 1 Mikuni 1 Mikuni
VM30SS Slide VM30SS Slide VM30SS Slide
Standard Standard Standard
COl COl COl
12V 120W 12V 100W 12V 100W
1021258.9 102/258.9 109/276.9
40/101.5 40/101.5 40/101.5
33/83.7 33/83.7 34/86.3
31/78.7 31/78.7 31/78.7
15/38.1 15/38.1 15/38.1
108/274.1 108/274.1 133.5/338.9
5.4/4.5/20 5.4/4.5/20 7.5/6.2128
88 Octane Min. 88 Octane Min. 88 Octane Min.
Mono Leaf Mono Leaf Mono Leaf
Mechanical Disc Mechanical Disc Mechanical Disc
Rear of Seat Rear of Seat Rear of Seat
Option Sprint Option Standard
Standard ES
Option Sprint Option Standard
Standard ES
Option Sprint Option Standard
Standard ES
N/A N/A N/A
Sprint ES Only N/A N/A
Option N/A N/A
N/A N/A N/A
N/A N/A N/A
N/A N/A Standard
Option Option Option
8/94
,
12. MODELS AND SPECIFICATIONS
1988 Model Identification
SERIAL NUMBER IDENTIFICATION
The machine serial number may be used as an aid in identifying machine model year. Referto the first digits in the serial number
for proper identification:
FIRST DIGITS
12
13
14
15
MODEL YEAR
1985
1986
1987
1988
1988 MODEL DESIGNATION
YEAR DESIGNATIONI- - - - -- - -;:::==ll~ ENGINE DESIGNATION
I 0 8810 9 17
MODEL DESIGNATION _________ ---.JI
1988
MODEL DESIGNATION
NUMBERS (Chassis)
09 - Star/Sprint (ES)
10 - StarTrak
15 - Long Track RLR
04 - Indy Sport
05 - Indy 133 SKS
06 - Indy Trail SP
07 - Indy Trail, 400, 650
MODEL NO.
SERIAL NO.
1988
ENGINE DESIGNATION
NUMBERS
27 - EC25PS-Single FC
31 - EC34-2PM-02-Twin FC ES
33 - EC34-2PM-01-03-Twin FC
49 - EC44-2PM-4100-Twin FC
58 - EC65PL-01-Triple LC
1988
ENGINE DESIGNATION
NUMBERS
59 - EC40PL-02-Twin LC
61 - EC50PM-01-Twin FC
62 - EC50PM-02-Twin FC ES
MADE IN U.S.A. PDLRRIS
PATENT NOTICE
Mfd. by Polaris Industries L.P.
THIS VEHICLE CONFORMS TO ALL APPLICABLE U.S.
FEDERAL AND STATE REQUIREMENTS AND
CANADIAN FEDERAL MOTOR VEHICLE STANDARDS
IN EFFECT ON THE DATE OF MANUFACTURE.
in Roseau, MN under one or more of the following patents:
U.S. Patents 3,605.511 3,533.662 3.613,811
3,580,647 3,613,810 3.605.510
3,483.766 3.545.821 3.525,412
Patented Canada 882.491 171 883,694171
Canadian Rd. 34,573171 34,572171
MFD. DATE:
These numbers should be referred to in any correspondence regarding warranty, service or replacement parts.
3,867,991
4,793,950
5,038,881
864,39417t
1,227,823187
7072133
The machine model and serial number identification decal is located on the right front side of the tunnel. The serial number is
permanently stamped into the tunnel. The model number is embossed on the decal.
Whenever corresponding about an engine it is important that the engine model and serial numbers be called out. Laser
engraved model and serial numbers are located on the crankcase (intake side).
8/94 1.10
o
13. Indy 650
Indy 650 SKS
0880758
0880558
Engine Type LC Triple
Displacement (cc) 648
Bore x Stroke (mm) 67.72 x 60
CarburetionlThrottle Body 3 Mikuni
VM38SS Slide
Oil Injected Standard
Ignition COl
Alternator Output 12V 120W
Length (in./cm.) 106.25/269.9
113/287 SKS
Width (in./cm.) 41 .62/105.7
Height (in./cm.) 42/106.7
Ski Stance (in./cm.) 36.5/92.7
Track Width (in./cm.) 15/38 .1
Track Length Overall (in./cm.) 120.96/307.2
133.56/339.2 SKS
Fuel Capacity (U.S. gal./lmp. gal./liters) 7.3/6.1/27.7
Recommended Fuel 88 Octane Min.
o
Front Suspension Coil Spring IFS
Brake Type Liquid Cooled
Hydraulic Disc
Storage Rear of Seat
Speedometer Standard
Tachometer Standard
Trip Odometer Standard
Accessory Lights HighTemp Ind.
Electric Start N/A
Handwarmers Option
Two-Up Seat Option
Backrest Option
Storage Rack Option
Tow Hitch Option
1.11
MODELS AND SPECIFICATIONS
1988 Model Identification
Indy 400 Indy 400 Indy Trail, SP
400SKS Classic Deluxe, ES,
SKS
0880759 0880859 0880761/08806611
0880559 0880262/08807621
0880561
LCTwin LC Twin Fan Cooled Twin
398 398 488
65 x 60 65 x 60 72 x 60
2 Mikuni 2 Mikuni 2 Mikuni
VM34SS Slide VM34SS Slide VM34SS Slide
Standard Standard Standard
COl COl COl
12V 120W 12V 120W 12V 120W
106.25/269.9 106.25/269.9 106.25/269.9
113/287 SKS 113/287 SKS
41 .62/105.7 41 .62/105.7 41.62/105.7
43.12/109.5 SP
42/106.7 42/106.7 42/106.7
36.5/92.7 36.5/92.7 36.5/92.7
38/96.5 SP
15/38.1 15/38.1 15/38.1
120.96/307.2 120.96/307.2 121/307.1
133.56/339.2 SKS 133.56/339.2 SKS
7.3/6.1 /27 .7 7.3/6.1/27.7 7.3/6.1/27.7
88 Octane Min. 88 Octane Min. 88 Octane Min.
Coil Spring IFS Coil Spring IFS Coil Spring IFS
Hydraulic Disc Hydraulic Disc Hydraulic Disc
Rear of Seat Rear of Seat Rear of Seat
Standard Standard Standard
Standard Standard Standard
Standard Standard Standard
High Temp Ind. Standard N/A
N/A Standard Option
Standard ESIDel
Option Standard Standard
Option Option Option
Standard Deluxe
Option Option Option
Standard Deluxe
Option Option Option
Option Option Option
8/94
14. MODELS AND SPECIFICATIONS
1988 Model Identification
Indy Sport Sprint
0880433 0880931
Engine Type Fan Cooled Twin Fan Cooled Twin
Displacement (cc) 339 339
Bore x Stroke (mm) 62 x 55.6 62 x 55.6
CarburetionfThrottle 2 Mikuni 2 Mikuni
Body VM30SS Slide VM30SS Slide
Oil Injected Standard Standard
Ignition COl COl
Alternator Output 12V 120W 12V 120W
Length (in.!cm.) 106.25/269.9 1021259.1
Width (in.!cm.) 41 .621105.7 40/101 .6
Height (in.!cm.) 42/106.7 44.5/113
Ski Stance (in.!cm.) 36.5/92.7 31/78.7
Track Width (in.!cm.) 15/38.1 15/38.1
Track Length Overall 120.96/307.2 108/274.3
(in.!cm.)
Fuel Capacity (U.S. 7.3/6.1 /27.7 7.5/6.2128.1
gal./lmp. gal./liters)
Recommended Fuel 88 Octane Min. 88 Octane Min.
Front Suspension Coil Spring IFS Mono Leaf
Brake Type Hydraulic Disc Mechanical Disc
Storage Rear of Seat Rear of Seat
Speedometer Standard Standard
Tachometer Option Option
Trip Odometer Standard N/A
Accessory Lights N/A N/A
Electric Start Option N/A
Handwarmers Option Option
Two-Up Seat N/A N/A
Backrest N/A N/A
Storage Rack Option Option
Tow Hitch Option Option
Star
0880927
Fan Cooled Single
244
72 x 60
1 Mikuni
VM30SS Slide
Standard
COl
12V 100W
102/259.1
40/101.6
44.5/113
31/78.7
15/38.1
108/274.3
7.5/6.2128.1
88 Octane Min.
Mono Leaf
Mechanical Disc
Rear of Seat
Option
Option
N/A
N/A
N/A
N/A
N/A
N/A
Option
Option
8/94 1.12
Long Track Star Trak
Reverse
0881549 0881027
Fan Cooled Twin Fan Cooled Single
432 244
67.72 x 60 72 x 60
2 Mikuni 1 Mikuni
VM34SS Slide VM30SS Slide
Standard Standard
COl COl
12V 120W 12V 100W
120.5/306.1 109/276.9
o40/101.6 40/101.6
44.5/113 44.51113
31/78.7 31/78.7
15/38.1 15/38.1
148/376 133/337.8
7.5/6.2/28.1 7.5/6.2/28.1
88 Octane Min. 88 Octane Min.
Mono Leaf Mono Leaf
Mechanical Disc Mechanical Disc
Rack/Rear of Seat Rack/Rear of Seat
Standard Standard
Option Option oN/A N/A
Neutral Ind. N/A
N/A N/A
Option N/A
N/A N/A
N/A N/A
Standard Standard
Standard Option
15. o
MODELS AND SPECIFICATIONS
1989 Model Identification
SERIAL NUMBER IDENTIFICATION
The machine serial number may be used as an aid in identifying machine model year. Referto the first digits in the serial number
for proper identification:
FIRST DIGITS
12
13
14
15
16
MODEL YEAR
1985
1986
1987
1988
1989
1989 MODEL DESIGNATION
YEAR DESIGNATION-----------;:=;:::JI~ ENGINE DESIGNATION
I 0 8 910 9 17
MODEL DESIGNATION _ _________ -'1
1989
MODEL DESIGNATION
NUMBERS (Chassis)
09 - Star/Sprint (ES)
10- StarTrak
1989
ENGINE DESIGNATION
NUMBERS
27 - EC25PS-Single FC
1989
ENGINE DESIGNATION
NUMBERS
59 - EC40PL-02-Twin LC
61 - EC50PM-01 -Twin FC
15 - LongTrak LTR
01 - Indy Trail SuperTrak
02 - Indy Trail Deluxe
31 - EC34-2PM-02-Twin FC ES
33 - EC34-2PM-01-03-Twin FC
49 - EC44-2PM-4100-Twin FC
58 - EC65PL-01-Triple LC
62 - EC50PM-02-Twin FC ES
64 - EC50PL-01-Twin LC
04 - Indy Sport
05 - Indy 133 SKS
06 - Indy Trail SP
07 - Indy 440, 500, 650
08 - Indy 500 Classic
24 Indy Sport GT
65 - EC50PL-02-Twin LC ES
MODEL NO. MADE IN U.S.A. PCLRRIS
PATENT NOTICE
SERIAL NO.
THIS VEHICLE CONFORMS TO ALL APPLICABLE U.S.
FEDERAL AND STATE REQUIREMENTS AND
CANADIAN FEDERAL MOTOR VEHICLE STANDARDS
IN EFFECT ON THE DATE OF MANUFACTURE.
MFD. DATE:
Mfd. by Polaris Industries L.P.
in Roseau, MN under one or more of the following patents:
U.S. Patents 3,605,51t 3,533,662 3,6t3,811
3,580,647 3,613,810 3,605,510
3,483,766 3,545,821 3,525,412
Patented Canada 882,491171 883 .694171
Canadian Rd. 34,573171 34 ,572171
These numbers should be referred to in any correspondence regarding warranty, service or replacement parts.
3,867,991
4,793,950
5,038,881
864,39417t
1,227,823/87
7072133
The machine model and serial number identification decal is located on the right front side of the tunnel. The serial number is
permanently stamped into the tunnel. The model number is embossed on the decal.
Whenever corresponding about an engine it is important that the engine model and serial numbers be called out. Laser
engraved model and serial numbers are located on the crankcase (intake side).
1.13 8/94