More Related Content Similar to 131002-60319-Jackson Airport-LA-COMBINE
Similar to 131002-60319-Jackson Airport-LA-COMBINE (20) More from Lee Yung Anchor
More from Lee Yung Anchor (10) 131002-60319-Jackson Airport-LA-COMBINE1. BB BARREL BOLT
C.O.S CHECK ON SITE
IBW INSTANT BOILING WATER UNIT
BY OTHERS
LKC LOCK (CABINET/ DRAWER)
PTD PAPER TOWEL DISPENSER
MX MIXER
S SINK
SD SOAP DISPENSER
ST STONE
TM TIMBER
LAM LAM
NOM. NOMINAL
UNO UNLESS NOTED OTHERWISE
ABBREVIATED NOTES
JOINERY NOTES
1. ALL DIMENSIONS ARE TO BE CHECKED ON SITE PRIOR TO CONSTRUCTION.
2. THIS SECTION OF WORK SHALL BE READ IN CONJUNCTION WITH JOINERY
FINISHES; WALL FINISHES; FIXTURES & FITTINGS SCHEDULES.
DESIGN NOTES- LABORATORY/ KITCHENETTE UNITS
TYPICAL
1. JOINERY / CABINET DOOR HANDLES - REFER TO JOINERY SCHEDULE.
2. SINK/ TAPWARE/ SOAP & PAPER TOWEL DISPENSERS SHOWN
INDICATIVELY. REFER TO FIXTURES AND FINISHES SCHEDULES.
3. OVERHEAD CUPBOARDS TO HAVE A FIXED MID SHELF, WHITE MELAMINE
FINISH UNO.
4. LOWER CUPBOARDS TO HAVE ONE ADJUSTABLE SHELF, WHITE MELAMINE
FINISH UNO.
5. BENCHTOPS TO BE SOLID COMPACT LAMINATE, NOM. 18mm THICK.
REFER SCHEDULE FOR COLOUR.
6. TOP DRAWER FITTED WITH CUTLERY INSERT TO SUIT DRAWER WIDTH -
KITCHENETTE ONLY
7. CUPBOARDS TO HAVE HAFELE HINGES 90/170 DEGREE OPENING, ALL
METAL SPRUNG FULLY CONCEALED HINGES TO SUIT DOOR WEIGHT AND
CONFIGURATION.
8. DRAWERS FITTED WITH HAFELE FULLY EXTENDABLE HEAVY DUTY SELF
CLOSING RUNNERS, LENGTH TO SUIT CARCASS.
9. LOCKABLE DRAWERS FITTED WITH HAFELE SYMO 3000 LOCKING SYSTEM TO
SUIT DRAWER CONFIGURATION AS NOMINATED. KEY TO BE JOINERY MASTER
KEY SYSTEM DISTINCT TO LOCK SYSTEM, UNO.
10. KEY DRAWERS AND ADJACENT CABINET WITHIN THE SAME AREA ALIKE,
AND ALL OTHER INDIVIDUAL COUNTER TO BE KEYED TO DIFFER. CONFIRM
WITH CLIENT FOR LOCK/ KEY REQUIREMENTS.
11. PROVIDE 3M BRAND RUBBER BUFFERS BETWEEN ALL CLOSING
SURFACES. ADHESIVE APPLIED.
12. KICKBOARDS TO BE 50mm RECESSED FROM FINISHED FACE OF
CUPBOARDS.
13. CABINET DOORS/DRAWERS TO BE 20mm RECESSED FROM BENCHTOP
FINISHED EDGE.
14. SILICONE SEAL JUNCTION OF SPLASHBACK TO BENCH TOP, AND
SPLASHBACK TO WALL WITH APPROVED SEALANT .
15. ALL SELECTED LAMINATES TO BE ON LAMINEX EO BOARD/ SUBSTRATES
(OR EQUAL APPROVED) TO SUIT JOINERY LOCATION & APPLICATION.
16. CUPBOARD DOORS AND DRAWER FRONTS TO HAVE ABS MATCHING EDGE
STRIPS.
2066
1200900
2100
EQEQEQEQ
350
E.Q
528
E.Q
528
E.Q
528
TYPICAL450
16
E.Q
509
E.Q
509
E.Q
509
E.Q
509
16
16
2066
ONE LOCKABLE CUPBOARD
AND ONE LOCKABLE DRAWER
AS SHOWN
SPLASHBACK - COMPACT LAMINATE
BENCHTOP - COMPACT LAMINATE
GABLE SPACER TO EITHER SIDE
OF END WALL ( WALLS NOT
DRAWN FOR CLARITY) -TYPICAL
600600750150
600
PTD
SD
S
MX
GABLE SPACER TO EITHER SIDE
OF END WALL ( WALLS NOT
DRAWN FOR CLARITY) -TYPICAL
IBW
900600600
2695
EXISTING BLOCK WALL
EXISTING COLUMN
GABLE SPACER
TO END WALL (WALL NOT
DRAWN FOR CLARITY)
EXPOSED EDGE TO MATCH
ADJACENT FINISH AS
SPECIFIED
END WALL NOT DRAWN
FOR CLARITY
MX
IBW
PTD
SD
SCRIBE BENCH TOP AND
NEATLY AROUND COLUMN,
SILICONE SEAL AT JUNCTION
WITH APPROVED SEALANT
NO LOCKS
EQ.
EQ.
EQ.
EQ.
EQ.
EQ2.
EQ2.
EQ2.
CONFIRMONSITE
1448
TILED SPLASHBACK
OVERHANG50
900500 OVERHANG20
NOM.1364
COVED VINYL SKIRTING WITH 20mm
PREFORMED COVE FILLET TO
KICKBOARD
GABLE SPACER TO END WALL(WALL NOT
DRAWN FOR CLARITY)
EXPOSED EDGE TO MATCH ADJACENT FINISH
AS SPECIFIED
CORNER CUPBOARD WITH PIANO
HINGES
GABLE SPACER TO END
WALL, EXPOSED EDGES
TO MATCH ADJACENT
FINISH
CUPBOARD DOORS -
LAMINATE FINISH WITH
MATCHING ABS EDGE
BENCH TOP - COMPACT LAMINATE
PTD
SD
S
MX
TYPICAL600
TYPICAL600
164
18
TYPICAL
600
ONE LOCKABLE CUPBOARD
AND ONE LOCKABLE DRAWER
AS SHOWN
SPLASHBACK - COMPACT LAMINATE
300
450
18
1161
18
NOM.
1947
IBW
BB
LKC
LKC
ALIGN THE FINISH EDGE OF
DRAINER TO CABINET
BELOW
SPACE FOR IWB BY OTHERS.
NO LOCKS
IBW
SD
PTD S
MX
OVERHEAD CUPBOARDS -
LAMINATE FINISH
CENTRE THE SINK UNIT TO BENCH
TILED SPLASHBACK
COMPACT LAMINATE TO BENCH TOP
AS SPECIFIED
COVED VINYL SKIRTING WITH 20mm
PREFORMED COVE FILLETS ALL AROUND &
NEATLY RETURN TO ADJACENT WALL
( WALL NOT DRAWN FOR CLARITY)
DRAWERS & CUPBOARD DOORS -
LAMINATE FINISH.
GABLE END IN LAMINATE
FINISH
COVED VINYL RECESSED KICKBOARD-
50mm SHADOW RECESSED AROUND
FRONT AND SIDES
600
600
600
600
600600900
2400
2100
EQ.EQ.EQ.EQ.
TYPICAL
900
SD
S
MX
18
NOM.2151
NOM.
1480
500
TYPICAL
600
ONE LOCKABLE CUPBOARD
AND ONE LOCKABLE
DRAWER AS SHOWN
GABLE SPACER TO EITHER
SIDE OF END WALL ( WALLS
NOT DRAWN FOR CLARITY)
SPLASHBACK -
COMPACT LAMINATE
PTD
TYPICAL450
TYPICAL600
TYPICAL600
483
1180
300
IBW
BENCH TOP - COMPACT
LAMINATE
LKC
LKC
COVED VINYL SKIRTING
Upper Ground Level www.agarchitects.net.au
3/47 Anderson St mail@agarchitects.net.au
Fortitude Valley Q 4006 ph. (07) 3852 1355
© Copyright AG Architects Brisbane Pty Ltd as
trustee for AG Architects Trust.
Reproduction of the whole or part of this document
constitutes an infringement of copyright.
The information, ideas and concepts contained in this
document are confidential and the recipient
of this document is prohibited from disclosing information,
ideas and concepts to any person
without the prior written consent of AG Architects Pty Ltd.
The Client is licensed to use the documents and drawings
to produce the project for which they were
intended provided that the license applies only to the site to
which the design relates and fees have been
paid to the Architect for the particular stage which he has
been commissioned.
The Architect is not responsible for any discrepancies
occurring on site. All discrepancies shall be reported
to the Architect prior to commencement of any construction
work or shop drawings. This drawing is
not to be scaled for dimensioning purposes. Use figured
dimensions only.
Scale
Drawn by
Date
Project No.
Real Property
Description IssueDrawing No.
Drawing Title.
North Point
Status
Design and Construction: Client:
Site Portion Number 2098
Port Moresby
Lic No: QAC / R61 / 0842
1039
AGA Ref No.
Boroko Food World
Gordons. NCD.
Port Moresby, PNG.
PO Box 222
Boroko Food World
Gordons, NCD.
Documentation:
Phone: +675 3107 470 (PNG)
Fax: +317 38061 688 (AUS)
www.matrix.com.au
60319
The location of existing walls and structure have been provided to AG
Architects by others.
As such AG Architects cannot warrant or verify the accuracy of existing
layout and takes no responsibility for discrepancies in measurements
associated with setout of new work joining into existing elements.
Where setout dimensions of new work are critical in order to join into
existing it is the responsibility of the builder to check and confirm location
& nature of all existing elements prior to setting out; fabrication; and
construction of new works.
All discrepancies between site conditions & those shown on drawings are
to be referred to the architect for further instructions.
As indicated (@ A1)
16/12/20136:29:39PM
1
JOINERY DETAILS -
LABS & KITCHENETTES
Issue Date
LA
1039-A-WD-84.10
CD
POM JACKSON'S INTERNATIONAL
AIRPORT ITB UPGRADE
PORT MORESBY PNG
Issue Description Date By
1 PRELIMINARY ISSUE FOR CLIENT FEEDBACK 13/12/13 NAS
SCALE: (@ A1)3
LGF- QUARANTINE OFFICE LAB
SCALE: (@ A1)2
LGF-STAFF KITCHENETTE
SCALE: (@ A1)1
LGF-CUSTOMS LAB 1 ( LAB 2 - MIRROR REVERSE )
SCALE: (@ A1)5
LGF- QUARANTINE OFFICE KITCHENETTE
SCALE: (@ A1)4
LGF- FORENSIC LAB
2. SHUTTER & ASSOCIATED
ACCESSORIES NOT SHOWN,
REFER TO NOTES ON ELEVATIONS
550
350
STONE COUNTERTOP
& SIDE GABLES.
MITRED EDGES.
50
KWILA LEDGE
FINISH DADO AT
FACE OF COUNTER-
TOP SIDE GABLE TYPICAL
KWILA BOTTOM RAIL
RECESSED
KICKBOARD
JOINERY NOTES
1. ALL DIMENSIONS ARE TO BE CHECKED ON SITE PRIOR TO CONSTRUCTION.
2. THIS SECTION OF WORK SHALL BE READ IN CONJUNCTION WITH FIXTURES &
FINISHES SCHEDULES
DESIGN NOTES- SERVICE/ RECEPTION COUNTERS
TYPICAL
1. JOINERY / CABINET DOOR HANDLES - REFER TO JOINERY SCHEDULE.
2. PROVIDE ONE ADJUSTABLE SHELF TO EACH CUPBOARD, WHITE MELAMINE
FINISH UNO.
3. CUPBOARDS TO HAVE HAFELE HINGES 90/170 DEGREE OPENING, ALL
METAL SPRUNG FULLY CONCEALED HINGES TO SUIT DOOR WEIGHT AND
CONFIGURATION.
4. TOP DRAWER FITTED WITH A PENCIL TRAY INSERT.
5. DRAWERS FITTED WITH HAFELE FULLY EXTENDABLE HEAVY DUTY SELF
CLOSING RUNNERS, LENGTH TO SUIT CARCASS.
6. DRAWERS WITH GANG LOCK, HAFELE SYMO 3000 LOCKING SYSTEM TO
SUIT DRAWER CONFIGURATION AS NOMINATED. KEY TO BE JOINERY MASTER
KEY SYSTEM DISTINCT TO LOCK SYSTEM, UNO
7. KEY DRAWERS AND ADJACENT CABINETS WITHIN THE SAME AREA ALIKE,
AND ALL OTHER INDIVIDUAL COUNTERS TO BE KEYED TO DIFFER. CONFIRM
WITH CLIENT LOCK/ KEY REQUIREMENTS.
8. CABINETS FITTED WITH LAMINATE 3M BRAND RUBBER BUFFERS BETWEEN
ALL CLOSING SURFACES. ADHESIVE APPLIED.
9. CABINET DOOR/ DRAWERS TO BE RECESSED 20mm FROM THE BENCH TOP
FINISHED EDGE.
10. PROVIDE GABLE SPACERS TO CABINETS AT JUNCTION WITH WALLS. ALL
EXPOSED EDGES FINISHED TO MATCH ADJACENT SURFACE.
11. SILCONE SEAL JUNCTION OF BENCH TOP TO WALL WITH APPROVED
SEALANT
12. ALL SELECTED LAMINATES TO BE ON LAMINEX EO BOARD/ SUBSTRATES
(OR EQUAL APPROVED) TO SUIT JOINERY LOCATION & APPLICATION
RECESSED KICKBOARD
RETURN SKIRTING TO
FACE OF KICKBOARD.
RETURN SKIRTING
TO FACE OF KICKBOARD
FACE OF KICKBOARD
SETBACK 50mm FROM
FACE OF WALL RETURN.
FINISH DADO AT
FACE OF COUNTER-
TOP RETURN
KWILA LEDGE
KWILA BOTTOM RAIL
SHUTTER & ASSOCIATED
ACCESSORIES NOT SHOWN,
REFER TO NOTES ON ELEVATIONS
84.11
1746 550 350
190410042011757
50
50
VISA O.A.
NEW
FOREX
NEW
KWILALEDGEKWILALEDGE
84.11
- FIT COUNTERS NEATLY
BETWEEN WALLS
- BENCHTOPS FIXED TO
SUPPORTS FIXED TO FACE
OF WALLS
CUT BENCHTOP
NEATLY AROUND
COLUMN BUILDOUT
3 2
ALLOW TO PROVIDE TWO GROMMET
HOLES TO EACH COUNTER BENCHTOP
WITH ADJUSTABLE COVERS, NOM.
80mm DIAMETER, 40mm CLEAR OF
ALL EDGES. COLOUR TO MATCH
BENCHTOP. CONFIRM EXACT LOCATION
WITH CLIENT.
350 550
150 300
BENCHTOP
600
BENCHTOP&LEDGE
750
300
COUNTERTOP
1100
10 100
BENCHTOP -
LAMINATE FINISH
STONE COUNTERTOP
STONE PANEL FACING
KWILA LEDGE SUPPORTED
ON ANGLES FIXED TO
SUB-STRUCTURE
STONE PANEL FACING
KWILA BOTTOM RAIL
38 THICK DRESSED
LAMINATE KICKBOARD
CARCASS -
LAMINATE FINISH
STONE COUNTERTOP
& SIDE GABLES
STONE PANEL FACING
KWILA LEDGE
STONE PANEL FACING
KWILA BOTTOM RAIL
38 THICK DRESSED
RECESSED KICKBOARD
- LAMINATE FINISH
RETURN SKIRTING
TO FACE OF KICKBOARD
ROLLER SHUTTER DRUM
CONCEALED IN BULKHEAD
ROLLER SHUTTER GUIDE
CONCEALED IN STUD WALL
4
84.11
Sim
4
84.11
Sim
4
84.11
Sim
4
84.11
Sim
350750
350750
TAKE SKIRTING TO
FACE OF CARCASS
BENCHTOP -
SELECTED LAMINATE
STONE COUNTERTOP
BULKHEAD TO
CONCEAL ROLLER
SHUTTER DRUM
CARCASS -
SELECTED LAMINATE
OPEN UNDER
OPEN UNDER
Upper Ground Level www.agarchitects.net.au
3/47 Anderson St mail@agarchitects.net.au
Fortitude Valley Q 4006 ph. (07) 3852 1355
© Copyright AG Architects Brisbane Pty Ltd as
trustee for AG Architects Trust.
Reproduction of the whole or part of this document
constitutes an infringement of copyright.
The information, ideas and concepts contained in this
document are confidential and the recipient
of this document is prohibited from disclosing information,
ideas and concepts to any person
without the prior written consent of AG Architects Pty Ltd.
The Client is licensed to use the documents and drawings
to produce the project for which they were
intended provided that the license applies only to the site to
which the design relates and fees have been
paid to the Architect for the particular stage which he has
been commissioned.
The Architect is not responsible for any discrepancies
occurring on site. All discrepancies shall be reported
to the Architect prior to commencement of any construction
work or shop drawings. This drawing is
not to be scaled for dimensioning purposes. Use figured
dimensions only.
Scale
Drawn by
Date
Project No.
Real Property
Description IssueDrawing No.
Drawing Title.
North Point
Status
Design and Construction: Client:
Site Portion Number 2098
Port Moresby
Lic No: QAC / R61 / 0842
1039
AGA Ref No.
Boroko Food World
Gordons. NCD.
Port Moresby, PNG.
PO Box 222
Boroko Food World
Gordons, NCD.
Documentation:
Phone: +675 3107 470 (PNG)
Fax: +317 38061 688 (AUS)
www.matrix.com.au
60319
The location of existing walls and structure have been provided to AG
Architects by others.
As such AG Architects cannot warrant or verify the accuracy of existing
layout and takes no responsibility for discrepancies in measurements
associated with setout of new work joining into existing elements.
Where setout dimensions of new work are critical in order to join into
existing it is the responsibility of the builder to check and confirm location
& nature of all existing elements prior to setting out; fabrication; and
construction of new works.
All discrepancies between site conditions & those shown on drawings are
to be referred to the architect for further instructions.
As indicated (@ A1)
16/12/20136:29:40PM
1
JOINERY DETAILS - VISA
OA & FOREX
Issue Date
LA
1039-A-WD-84.11
CD
POM JACKSON'S INTERNATIONAL
AIRPORT ITB UPGRADE
PORT MORESBY PNG
SCALE: (@ A1)5
LGB- FOREX COUNTER
Issue Description Date By
1 PRELIMINARY ISSUE FOR CLIENT FEEDBACK 13/12/13 NAS
SCALE: (@ A1)6
LGB- VISA O.A. COUNTER
SCALE: 1 : 20 (@ A1)1
LGB- VISA OA_FOREX
SCALE: 1 : 20 (@ A1)4
TYPICAL COUNTER SECTION
SCALE: 1 : 20 (@ A1)2
LGB- VISA OA & FOREX
SCALE: 1 : 20 (@ A1)3
LGB- VISA OA & FOREX 2
3. STONE COUNTERTOP & GABLE ENDS
WORK TOP IN SINGLE PIECE - CLAM5
PROVIDE UNDER BENCH CABLE MANAGEMENT TRAY TO
SUIT
ALLOW TWO GROMMET HOLES (TOTAL) WITH ADJUSTABLE COVERS,
NOM. 80mm DIA. COLOUR TO MATCH, POSITION TO EITHER SIDE OF
PIGEON HOLE UNITS
LOCKABLE UNDER BENCH DRAWERS IN LAMINATE
FINISH AS SPECIFIED
STAINLESS STEEL LEG WITH ADJUSTABLE FOOT
RECESSED KICKBOARD - CLAM5
KWILA BOTTOM RAIL
FIT A4 (LANDSCAPE) UNDER BENCH PIGEON HOLE UNIT
JF2 FINISH.
S3
S3
CLAM5
800
40960150
NOM.
4300
1150
LOCK
FIT CABINET NEATLY AROUND
COLUMN ( SHOW DASHED LINE)
AND END WALL ( NOT DRAWN FOR CLARITY)
DRAWER FRONTS - JF5
GABLE SPACER, FINISH TO
MATCH ADJACENT FINISH
HAFELE SYMO 3000
JOINERY LOCK WITH
BARREL BOLT AS SHOWN
CUPBOARDS FITTED WITH 2 (TWO) ADJUSTABLE
SHELVES, FINISH IN WHITE MELAMINE
INTERNALLY, POSITION OF BRASS FERRULES TO
SUIT A4 LEVER ARCH FOLDER HEIGHT
LKC
LKC
LKC
LKC
GANG LOCK DRAWERS
STONE
COUNTERTOP
- S3
JF2
CLAM5
KICKBOARD
BB
BB
BB
END WALL ( NOT DRAWN FOR
CLARITY)
JF2
875 1700 900
3475
1300 850 1325
S3
COUNTERTOP - STONE (S3)
BENCH TOP IN SINGLE PIECE
LAMINATED BOTH SIDES,
WITH SQUARE EDGE PROFILE
BUTT JOINT KWILA LEDGE TO LAMINATED
BENCH TOP
CLAM5
STAINLESS STEEL LEGS UNDER
KWILA LEDGE COMPLETED WITH COUNTERSUNK
SUPPORT FIXING PLATES POWDER COATED IN BLACK,
SECURELY FIXED TO SUB STRUCTURE
600150350
BB BARREL BOLT
C.O.S CHECK ON SITE
IBW INSTANT BOILING WATER UNIT
BY OTHERS
LKC LOCK (CABINET/ DRAWER)
PTD PAPER TOWEL DISPENSER
MX MIXER
S SINK
SD SOAP DISPENSER
ST STONE
TM TIMBER
LAM LAM
NOM. NOMINAL
UNO UNLESS NOTED OTHERWISE
ABBREVIATED NOTES
JOINERY NOTES
1. ALL DIMENSIONS ARE TO BE CHECKED ON SITE PRIOR TO CONSTRUCTION.
2. THIS SECTION OF WORK SHALL BE READ IN CONJUNCTION WITH JOINERY
FINISHES & FIXTURES SCHEDULES
DESIGN NOTES- SERVICE/ RECEPTION COUNTERS
TYPICAL
1. JOINERY / CABINET DOOR HANDLES - REFER TO JOINERY SCHEDULE.
2. PROVIDE ONE ADJUSTABLE SHELF TO EACH CUPBOARD, WHITE MELAMINE FINISH UNO.
3. CUPBOARDS TO HAVE HAFELE HINGES 90/170 DEGREE OPENING, ALL METAL SPRUNG FULLY CONCEALED HINGES TO SUIT DOOR WEIGHT AND CONFIGURATION.
4. TOP DRAWER FITTED WITH A PENCIL TRAY INSERT.
5. DRAWERS FITTED WITH HAFELE FULLY EXTENDABLE HEAVY DUTY SELF CLOSING RUNNERS, LENGTH TO SUIT CARCASS.
6. DRAWERS WITH GANG LOCK, HAFELE SYMO 3000 LOCKING SYSTEM TO SUIT DRAWER CONFIGURATION AS NOMINATED. KEY TO BE JOINERY MASTER KEY SYSTEM DISTINCT TO LOCK SYSTEM, UNO
7. KEY DRAWERS AND ADJACENT CABINETS WITHIN THE SAME AREA ALIKE, AND ALL OTHER INDIVIDUAL COUNTERS TO BE KEYED TO DIFFER. CONFIRM WITH CLIENT LOCK/ KEY REQUIREMENTS.
8. CABINETS FITTED WITH LAMINATE 3M BRAND RUBBER BUFFERS BETWEEN ALL CLOSING SURFACES. ADHESIVE APPLIED.
9. CABINET DOOR/ DRAWERS TO BE RECESSED 20mm FROM THE BENCH TOP FINISHED EDGE.
10. PROVIDE GABLE SPACERS TO CABINETS AT JUNCTION WITH WALLS. ALL EXPOSED EDGES FINISHED TO MATCH ADJACENT SURFACE.
11. SILCONE SEAL JUNCTION OF BENCH TOP TO WALL WITH APPROVED SEALANT
12. ALL SELECTED LAMINATES TO BE ON LAMINEX EO BOARD/ SUBSTRATES (OR EQUAL APPROVED) TO SUIT JOINERY LOCATION & APPLICATION
350 500 100 10
STAINLESS
STEEL LEG WITH
ADJUSTABLE
FOOT
S3
STONE - S3
CLAM5
JF2
STONE COUNTERTOP
- S3
BENCHTOP -
CLAM5
350750
KWILA BOTTOM RAIL
600 350 150
300
STAINLESS STEEL LEG WITH
ADJUSTABLE FOOT
STONE PANEL FACING, ARISSED
EDGES
S3
S3
S3
S3
S3
S3
S3
S3
S3S3
OPEN UNDER
DRESSED KWILA LEDGE,
FSC CERTIFIED
COUNTER TOP - STONE S3, FRONT
EDGE 40mm THICK,
KICKBOARD - CLAM5
CLAM5
CLAM5
CLAM5
KWILA BOTTOM RAIL,
DRESSED 38mm THICK.
OPEN UNDER
425
425
425
425
DESKHEIGHT
750
350
Upper Ground Level www.agarchitects.net.au
3/47 Anderson St mail@agarchitects.net.au
Fortitude Valley Q 4006 ph. (07) 3852 1355
© Copyright AG Architects Brisbane Pty Ltd as
trustee for AG Architects Trust.
Reproduction of the whole or part of this document
constitutes an infringement of copyright.
The information, ideas and concepts contained in this
document are confidential and the recipient
of this document is prohibited from disclosing information,
ideas and concepts to any person
without the prior written consent of AG Architects Pty Ltd.
The Client is licensed to use the documents and drawings
to produce the project for which they were
intended provided that the license applies only to the site to
which the design relates and fees have been
paid to the Architect for the particular stage which he has
been commissioned.
The Architect is not responsible for any discrepancies
occurring on site. All discrepancies shall be reported
to the Architect prior to commencement of any construction
work or shop drawings. This drawing is
not to be scaled for dimensioning purposes. Use figured
dimensions only.
Scale
Drawn by
Date
Project No.
Real Property
Description IssueDrawing No.
Drawing Title.
North Point
Status
Design and Construction: Client:
Site Portion Number 2098
Port Moresby
Lic No: QAC / R61 / 0842
1039
AGA Ref No.
Boroko Food World
Gordons. NCD.
Port Moresby, PNG.
PO Box 222
Boroko Food World
Gordons, NCD.
Documentation:
Phone: +675 3107 470 (PNG)
Fax: +317 38061 688 (AUS)
www.matrix.com.au
60319
The location of existing walls and structure have been provided to AG
Architects by others.
As such AG Architects cannot warrant or verify the accuracy of existing
layout and takes no responsibility for discrepancies in measurements
associated with setout of new work joining into existing elements.
Where setout dimensions of new work are critical in order to join into
existing it is the responsibility of the builder to check and confirm location
& nature of all existing elements prior to setting out; fabrication; and
construction of new works.
All discrepancies between site conditions & those shown on drawings are
to be referred to the architect for further instructions.
As indicated (@ A1)
16/12/20136:29:40PM
1
JOINERY DETAILS - NAC
INFORMATION COUNTER
OPTION A Issue Date
LA
1039-A-WD-84.12A
CD
POM JACKSON'S INTERNATIONAL
AIRPORT ITB UPGRADE
PORT MORESBY PNG
SCALE: (@ A1)2
LGE- NAC INFORMATION DESK- VIEW 3- A
SCALE: (@ A1)5
LGE- NAC INFORMATION STORAGE
SCALE: (@ A1)4
LGE- NAC INFORMATION DESK- PLAN VIEW- A
SCALE: (@ A1)3
LGE- NAC INFORMATION DESK- END ELEVATION- A
SCALE: (@ A1)1
LGE- NAC INFORMATION DESK- VIEW 1- A
Issue Description Date By
1 PRELIMINARY ISSUE FOR CLIENT FEEDBACK 13/12/13 NAS
4. COUNTERTOP - STONE S3
BENCH TOP IN SINGLE PIECE
LAMINATED BOTH SIDE,
WITH SQUARE EDGE PROFILE -
COMPACT LAMINATE CLAM5
BUTT JOINT KWILA LEDGE TO COMPACT
LAMINATE BENCH TOP
STAINLESS STEEL LEGS UNDER
KWILA LEDGE COMPLETED WITH COUNTERSUNK
SUPPORT FIXING PLATES POWDER COATED IN
BLACK, SECURELY FIXED TO SUB STRUCTURE
960
600
150
350
350 3150
1235
STAINLESS STEEL LEG WITH
ADJUSTABLE FOOT
OPEN UNDER
KWILA LEDGE, DRESSED
COUNTERTOP - STONE S3
RECESSED KICKBOARD -
CLAM5 LAMINATE
KWILA BOTTOM RAIL,
DRESSED 38mm THICK
STONE PANEL FACING -
S3 WITH ARISSED EDGES
520
520
520
520
520
2600
END WALL
NOT DRAWN
FOR CLARITY
STAINLESS STEEL LEG UNDER
FIT A4 (LANDSCAPE ) UNDER BENCH
PIGEON HOLE UNIT
LOCKABLE UNDER BENCH DRAWERS
IN LAMINATE FINISH
BENCHTOP -
CLAM 5 COMPACT LAMINATE
JOINERY NOTES
1. ALL DIMENSIONS ARE TO BE CHECKED ON SITE PRIOR TO CONSTRUCTION.
2. THIS SECTION OF WORK SHALL BE READ IN CONJUNCTION WITH JOINERY
FINISHES & FIXTURES SCHEDULES
DESIGN NOTES- SERVICE/ RECEPTION COUNTERS
TYPICAL
1. JOINERY / CABINET DOOR HANDLES - REFER TO JOINERY SCHEDULE.
2. PROVIDE ONE ADJUSTABLE SHELF TO EACH CUPBOARD, WHITE MELAMINE FINISH UNO.
3. CUPBOARDS TO HAVE HAFELE HINGES 90/170 DEGREE OPENING, ALL METAL SPRUNG FULLY CONCEALED HINGES TO SUIT DOOR WEIGHT AND CONFIGURATION.
4. TOP DRAWER FITTED WITH A PENCIL TRAY INSERT.
5. DRAWERS FITTED WITH HAFELE FULLY EXTENDABLE HEAVY DUTY SELF CLOSING RUNNERS, LENGTH TO SUIT CARCASS.
6. DRAWERS WITH GANG LOCK, HAFELE SYMO 3000 LOCKING SYSTEM TO SUIT DRAWER CONFIGURATION AS NOMINATED. KEY TO BE JOINERY MASTER KEY SYSTEM DISTINCT TO LOCK SYSTEM, UNO
7. KEY DRAWERS AND ADJACENT CABINETS WITHIN THE SAME AREA ALIKE, AND ALL OTHER INDIVIDUAL COUNTERS TO BE KEYED TO DIFFER. CONFIRM WITH CLIENT LOCK/ KEY REQUIREMENTS.
8. CABINETS FITTED WITH LAMINATE 3M BRAND RUBBER BUFFERS BETWEEN ALL CLOSING SURFACES. ADHESIVE APPLIED.
9. CABINET DOOR/ DRAWERS TO BE RECESSED 20mm FROM THE BENCH TOP FINISHED EDGE.
10. PROVIDE GABLE SPACERS TO CABINETS AT JUNCTION WITH WALLS. ALL EXPOSED EDGES FINISHED TO MATCH ADJACENT SURFACE.
11. SILCONE SEAL JUNCTION OF BENCH TOP TO WALL WITH APPROVED SEALANT
12. ALL SELECTED LAMINATES TO BE ON LAMINEX EO BOARD/ SUBSTRATES (OR EQUAL APPROVED) TO SUIT JOINERY LOCATION & APPLICATION
BB BARREL BOLT
C.O.S CHECK ON SITE
IBW INSTANT BOILING WATER UNIT
BY OTHERS
LKC LOCK (CABINET/ DRAWER)
PTD PAPER TOWEL DISPENSER
MX MIXER
S SINK
SD SOAP DISPENSER
ST STONE
TM TIMBER
LAM LAM
NOM. NOMINAL
UNO UNLESS NOTED OTHERWISE
ABBREVIATED NOTESSTAINLESS STEEL WITH
ADJUSTABLE FOOT
COUNTERTOP - STONE S3
BENCHTOP - COMPACT
LAMINATE CLAM5
800300
960
750
A4 (LANDSCAPE) PIGEON HOLE UNDER
UNDER BENCH LOCKABLE DRAWER
Upper Ground Level www.agarchitects.net.au
3/47 Anderson St mail@agarchitects.net.au
Fortitude Valley Q 4006 ph. (07) 3852 1355
© Copyright AG Architects Brisbane Pty Ltd as
trustee for AG Architects Trust.
Reproduction of the whole or part of this document
constitutes an infringement of copyright.
The information, ideas and concepts contained in this
document are confidential and the recipient
of this document is prohibited from disclosing information,
ideas and concepts to any person
without the prior written consent of AG Architects Pty Ltd.
The Client is licensed to use the documents and drawings
to produce the project for which they were
intended provided that the license applies only to the site to
which the design relates and fees have been
paid to the Architect for the particular stage which he has
been commissioned.
The Architect is not responsible for any discrepancies
occurring on site. All discrepancies shall be reported
to the Architect prior to commencement of any construction
work or shop drawings. This drawing is
not to be scaled for dimensioning purposes. Use figured
dimensions only.
Scale
Drawn by
Date
Project No.
Real Property
Description IssueDrawing No.
Drawing Title.
North Point
Status
Design and Construction: Client:
Site Portion Number 2098
Port Moresby
Lic No: QAC / R61 / 0842
1039
AGA Ref No.
Boroko Food World
Gordons. NCD.
Port Moresby, PNG.
PO Box 222
Boroko Food World
Gordons, NCD.
Documentation:
Phone: +675 3107 470 (PNG)
Fax: +317 38061 688 (AUS)
www.matrix.com.au
60319
The location of existing walls and structure have been provided to AG
Architects by others.
As such AG Architects cannot warrant or verify the accuracy of existing
layout and takes no responsibility for discrepancies in measurements
associated with setout of new work joining into existing elements.
Where setout dimensions of new work are critical in order to join into
existing it is the responsibility of the builder to check and confirm location
& nature of all existing elements prior to setting out; fabrication; and
construction of new works.
All discrepancies between site conditions & those shown on drawings are
to be referred to the architect for further instructions.
As indicated (@ A1)
16/12/20136:29:40PM
1
JOINERY DETAIL - NAC
INFORMATION COUNTER
OPTION B Issue Date
Author
1039-A-WD-84.12B
CD
POM JACKSON'S INTERNATIONAL
AIRPORT ITB UPGRADE
PORT MORESBY PNG
SCALE: (@ A1)1
LGE- NAC INFORMATION DESK- PLAN VIEW- B
SCALE: (@ A1)2
LGE- NAC INFORMATION DESK- VIEW 1- B
SCALE: (@ A1)3
LGE- NAC INFORMATION DESK- VIEW 3- B
SCALE: (@ A1)4
LGE- NAC INFORMATION DESK- END ELEVATION- B
Issue Description Date By
1 PRELIMINARY ISSUE FOR CLIENT FEEDBACK 13/12/13 NAS
5. STONE COUNTERTOP
STONE PANEL FACING
KWILA LEDGE
STONE PANEL FACING
KWILA BOTTOM RAIL
38 THICK DRESSED
RECESSED KICKBOARD
- LAMINATE FINISH
RETURN SKIRTING
TO FACE OF KICKBOARD
3838 STAINLESS STEEL SLIDING RAILS TO MATCH EXISTNG
KWILA EDGING
92x38 DRESSED
4
84.13
Sim
6
84.13
350750
OPEN UNDER
120120340150
FINISH DADO RAIL
AT FACE OF COUNTERTOP
RETURN GABLE
STONE COUNTERTOP
DRAWERS - SELECTED
LAMINATE. TOP DRAWER
KEY LOCKABLE
FILE DRAWER
RECESSED KICKBOARD
BENCHTOP GABLE
SPACER AGAINST WALL
COUNTER CARCASS -
LAMINATE FINISH
COUNTERTOP RETURN
GABLE TAKEN DOWN TO
TOP OF KWILA BOTTOM RAIL
BENCHTOP GABLE
RETURN
STAINLESS STEEL
SLIDING RAILS TO
MATCH EXISTING
KWILA EDGING
KWILA BOTTOM RAIL
RECESSED KICKBOARD -
LAMINATE FINISH
6
84.13
84.13284.13 3
4
84.13
Sim
KWILALEDGE
DRAWERS
UNDER
STAINLESS STEEL
SLIDING RAILS TO
MATCH EXISTING
15002869
1395 550 350
KWILA INFILL
STEP THE KWILA
EDGING AROUND
COUNTERTOP
RETURN GABLE
6
84.13
ALLOW TO PROVIDE A GROMMET
HOLE IN THE BENCHTOP WITH
ADJUSTABLE COVER, NOM. 80mm
DIAMETER, 40mm CLEAR OF ALL EDGES.
COLOUR TO MATCH BENCHTOP.
CONFIRM EXACT LOCATION WITH CLIENT.
BENCHTOP -
LAMINATE FINISH
STONE COUNTERTOP
STONE PANEL FACING
KWILA LEDGE SUPPORTED
ON ANGLES FIXED TO
SUB-STRUCTURE
STONE PANEL FACING
KWILA BOTTOM RAIL
38 THICK DRESSED
RECESSED KICKBOARD
CARCASS -
LAMINATE FINISH
300
BENCHTOP
600
150350550
300
1100
100 10
DRAWERS IN
ELEVATION
70
350550
890
100 690 100
STONE COUNTERTOP
& SIDE GABLE TAKEN
DOWN TO KWILA BOTTOM
RAIL
300
92x38 DRESSED KWILA
EDGING
KWILA BOTTOM RAIL
RECESSED KICKBOARD -
LAMINATE FINISH
STAINESS STEEL
SLIDING RAILS TO
MATCH EXISTING
BENCHTOP GABLE
BENCHTOP
Upper Ground Level www.agarchitects.net.au
3/47 Anderson St mail@agarchitects.net.au
Fortitude Valley Q 4006 ph. (07) 3852 1355
© Copyright AG Architects Brisbane Pty Ltd as
trustee for AG Architects Trust.
Reproduction of the whole or part of this document
constitutes an infringement of copyright.
The information, ideas and concepts contained in this
document are confidential and the recipient
of this document is prohibited from disclosing information,
ideas and concepts to any person
without the prior written consent of AG Architects Pty Ltd.
The Client is licensed to use the documents and drawings
to produce the project for which they were
intended provided that the license applies only to the site to
which the design relates and fees have been
paid to the Architect for the particular stage which he has
been commissioned.
The Architect is not responsible for any discrepancies
occurring on site. All discrepancies shall be reported
to the Architect prior to commencement of any construction
work or shop drawings. This drawing is
not to be scaled for dimensioning purposes. Use figured
dimensions only.
Scale
Drawn by
Date
Project No.
Real Property
Description IssueDrawing No.
Drawing Title.
North Point
Status
Design and Construction: Client:
Site Portion Number 2098
Port Moresby
Lic No: QAC / R61 / 0842
1039
AGA Ref No.
Boroko Food World
Gordons. NCD.
Port Moresby, PNG.
PO Box 222
Boroko Food World
Gordons, NCD.
Documentation:
Phone: +675 3107 470 (PNG)
Fax: +317 38061 688 (AUS)
www.matrix.com.au
60319
The location of existing walls and structure have been provided to AG
Architects by others.
As such AG Architects cannot warrant or verify the accuracy of existing
layout and takes no responsibility for discrepancies in measurements
associated with setout of new work joining into existing elements.
Where setout dimensions of new work are critical in order to join into
existing it is the responsibility of the builder to check and confirm location
& nature of all existing elements prior to setting out; fabrication; and
construction of new works.
All discrepancies between site conditions & those shown on drawings are
to be referred to the architect for further instructions.
1 : 20 (@ A1)
16/12/20136:29:44PM
1
JOINERY DETAILS -
QUARANTINE COUNTER
Issue Date
LA
1039-A-WD-84.13
CD
POM JACKSON'S INTERNATIONAL
AIRPORT ITB UPGRADE
PORT MORESBY PNG
SCALE: (@ A1)5
LGF- QUARANTINE COUNTER
SCALE: 1 : 20 (@ A1)2
LGF- QUARANTINE COUNTER
SCALE: 1 : 20 (@ A1)3
LGF- QUARANTINE COUNTER 2
SCALE: 1 : 20 (@ A1)1
LGF- QUARANTINE COUNTER
SCALE: 1 : 20 (@ A1)4
TYPICAL COUNTER SECTION
SCALE: 1 : 20 (@ A1)6
SLIDING RAIL SECTION
SCALE: (@ A1)7
LGF- QUARANTINE COUNTER REAR VIEW
REFER NOTES ON AWD-84.11.
Issue Description Date By
1 PRELIMINARY ISSUE FOR CLIENT FEEDBACK 13/12/13 NAS
6. 5
84.14
84.14 2 84.143
350 550 2328
2269
KWILALEDGE
- FIT COUNTERS NEATLY
BETWEEN WALLS
- BENCHTOPS FIXED TO
SUPPORTS FIXED TO FACE
OF WALLS
50
ALLOW TO PROVIDE TWO GROMMET
HOLES IN THE BENCHTOP WITH
ADJUSTABLE COVERS, NOM. 80mm
DIAMETER, 40mm CLEAR OF ALL EDGES.
COLOUR TO MATCH BENCHTOP.
CONFIRM EXACT LOCATION WITH CLIENT.
5
84.14
40 EQ. EQ. EQ. EQ. 40
120040760300
750
STONE COUNTERTOP
STONE PANEL FACING
KWILA LEDGE
STONE PANEL FACING
KWILA BOTTOM RAIL
38 THICK DRESSED
LAMINATE KICKBOARD
RETURN SKIRTING
TO FACE OF KICKBOARD
ROLLER SHUTTER DRUM
CONCEALED IN BULKHEAD
ROLLER SHUTTER GUIDE
CONCEALED IN STUD WALL
5
84.14
350750
TAKE SKIRTING TO
FACE OF CARCASS
BENCHTOP -
SELECTED LAMINATE
STONE COUNTERTOP
BULKHEAD TO
CONCEAL ROLLER
SHUTTER DRUM
CARCASS -
SELECTED LAMINATE
OPEN UNDER
RECESSED KICKBOARD
RETURN SKIRTING TO
FACE OF KICKBOARD.
RETURN SKIRTING
TO FACE OF KICKBOARD
FACE OF KICKBOARD
SETBACK 50mm FROM
FACE OF WALL
FINISH DADO AT
FACE OF COUNTER-
TOP RETURN GABLE
KWILA LEDGE
KWILA BOTTOM RAIL
SHUTTER & ASSOCIATED
ACCESSORIES NOT SHOWN,
REFER TO NOTES ON ELEVATIONS
350 550
150 300 600
BENCHTOP&LEDGE
750
300
COUNTERTOP
1100
10 100
BENCHTOP -
LAMINATE FINISH
STONE COUNTERTOP
STONE PANEL FACING
KWILA LEDGE SUPPORTED
ON ANGLES FIXED TO
SUB-STRUCTURE
STONE PANEL FACING
KWILA BOTTOM RAIL
38 THICK DRESSED
LAMINATE KICKBOARD
CARCASS -
LAMINATE FINISH
Upper Ground Level www.agarchitects.net.au
3/47 Anderson St mail@agarchitects.net.au
Fortitude Valley Q 4006 ph. (07) 3852 1355
© Copyright AG Architects Brisbane Pty Ltd as
trustee for AG Architects Trust.
Reproduction of the whole or part of this document
constitutes an infringement of copyright.
The information, ideas and concepts contained in this
document are confidential and the recipient
of this document is prohibited from disclosing information,
ideas and concepts to any person
without the prior written consent of AG Architects Pty Ltd.
The Client is licensed to use the documents and drawings
to produce the project for which they were
intended provided that the license applies only to the site to
which the design relates and fees have been
paid to the Architect for the particular stage which he has
been commissioned.
The Architect is not responsible for any discrepancies
occurring on site. All discrepancies shall be reported
to the Architect prior to commencement of any construction
work or shop drawings. This drawing is
not to be scaled for dimensioning purposes. Use figured
dimensions only.
Scale
Drawn by
Date
Project No.
Real Property
Description IssueDrawing No.
Drawing Title.
North Point
Status
Design and Construction: Client:
Site Portion Number 2098
Port Moresby
Lic No: QAC / R61 / 0842
1039
AGA Ref No.
Boroko Food World
Gordons. NCD.
Port Moresby, PNG.
PO Box 222
Boroko Food World
Gordons, NCD.
Documentation:
Phone: +675 3107 470 (PNG)
Fax: +317 38061 688 (AUS)
www.matrix.com.au
60319
The location of existing walls and structure have been provided to AG
Architects by others.
As such AG Architects cannot warrant or verify the accuracy of existing
layout and takes no responsibility for discrepancies in measurements
associated with setout of new work joining into existing elements.
Where setout dimensions of new work are critical in order to join into
existing it is the responsibility of the builder to check and confirm location
& nature of all existing elements prior to setting out; fabrication; and
construction of new works.
All discrepancies between site conditions & those shown on drawings are
to be referred to the architect for further instructions.
1 : 20 (@ A1)
16/12/20136:29:45PM
1
JOINERY DETAILS -
CUSTOMS DUTY
Issue Date
LA
1039-A-WD-84.14
CD
POM JACKSON'S INTERNATIONAL
AIRPORT ITB UPGRADE
PORT MORESBY PNG
SCALE: 1 : 20 (@ A1)1
LGF- CUSTOMS DUTY COUNTER
SCALE: 1 : 20 (@ A1)2
LGF- CUSTOMS DUTY COUNTER
SCALE: 1 : 20 (@ A1)3
LGF- CUSTOMS DUTY COUNTER 2
SCALE: (@ A1)4
LGF- CUSTOMS DUTY COUNTER
SCALE: 1 : 20 (@ A1)5
TYPICAL COUNTER SECTION
REFER NOTES ON AWD-84.11.
Issue Description Date By
1 PRELIMINARY ISSUE FOR CLIENT FEEDBACK 13/12/13 NAS
7. SELECTED STONE RAISED COUNTER
TOP WITH 3 TO 4mm ARRISED EDGE
SELECTED LAMINATED FINISH TO INTERNAL
CARCASS OF RAISED COUNTER TOP
ALIGN JOINT WITH GABLE BELOW
LOCKABLE CABINET UNDER, TYPICAL WITH ONE
ADJUSTABLE SHELF IN WHITE MELAMINE
DRAWERS - JF1:
- TOP DRAWER: PROVIDE A REMOVABLE PENCIL TRAY,
- BOTTOM DRAWER: PROVIDE FILE SUSPENSION SYSTEM
CAPABLE OF HOUSING A4 AND FOOLSCAP FILES
FRAMING SHOWN INDICATIVELY ONLY.
PROVIDE INTERNAL SUPPORTS &
PACKERS AS REQUIRED.
750
600
BENCHTOP - CLAM5
GABLE SPACER TO SUIT
C.O.S2900
NOM.
RECESSED KICKBOARD - JF2
PROVIDE UNDER BENCH CABLE
MANAGEMENT TRAY TO SUIT
UNDER BENCH BOX IN DUCT FOR POWER
AND DATA RETICULATION
TO AS 3000 ELECTRICAL INSTALLATION &
AS3350 WIRING INSTALLATION
UNDER BENCH ACCESS FOR POWER AND
DATA - ALLOW TWO GROMMET HOLES (IN
TOTAL) WITH ADJUSTABLE COVERS, NOM.
80mm DIA. , 40mm CLEAR OF ALL EDGES,
COLOUR TO MATCH, CONFIRM CLIENT FOR
EXACT LOCATION.
PROVIDE COUNTERTOP SUPPORT FINS TO SUIT
COUNTERTOP WEIGHT
PROVIDE ABOVE BENCH - 2 DOUBLE GPOs &
1 DUAL DATA OUTLETS
PROVIDE UNDER BENCH SERVICES:
2 DOUBLE GPOs AND 1 DUAL DATA
OUTLETS
GANG LOCK DRAWERS
END WALLS NOT DRAWN FOR CLARITY
E.Q
487 E.Q
487
E.Q
488
18
1480
GABLE END NOT DRAWN FOR CLARITY
COUNTER TOP & FULL GABLE FRONT AND ENDS -
STONE S4
LKC
LKC
LKC
18 TYPICAL600
TYPICAL600
TYPICAL600
600
350
750
END WALLS NOT SHOWN
FOR CLARITY
UNDERBENCH CABINETS, DOORS
& DRAWER FRONTS
- LAMINATE JF1.
RECESSED KICKBOARDS -
LAMINATE JF2
BENCHTOP -
COMPACT LAMINATE CLAM5
COUNTERTOP -
STONE S4
JOINERY NOTES
1. ALL DIMENSIONS ARE TO BE CHECKED ON SITE PRIOR TO CONSTRUCTION.
2. THIS SECTION OF WORK SHALL BE READ IN CONJUNCTION WITH FIXTURES &
FINISHES SCHEDULES
DESIGN NOTES- SERVICE/ RECEPTION COUNTERS
TYPICAL
1. JOINERY / CABINET DOOR HANDLES - REFER TO JOINERY SCHEDULE.
2. PROVIDE ONE ADJUSTABLE SHELF TO EACH CUPBOARD, WHITE MELAMINE
FINISH UNO.
3. CUPBOARDS TO HAVE HAFELE HINGES 90/170 DEGREE OPENING, ALL
METAL SPRUNG FULLY CONCEALED HINGES TO SUIT DOOR WEIGHT AND
CONFIGURATION.
4. TOP DRAWER FITTED WITH A PENCIL TRAY INSERT.
5. DRAWERS FITTED WITH HAFELE FULLY EXTENDABLE HEAVY DUTY SELF
CLOSING RUNNERS, LENGTH TO SUIT CARCASS.
6. DRAWERS WITH GANG LOCK, HAFELE SYMO 3000 LOCKING SYSTEM TO
SUIT DRAWER CONFIGURATION AS NOMINATED. KEY TO BE JOINERY MASTER
KEY SYSTEM DISTINCT TO LOCK SYSTEM, UNO
7. KEY DRAWERS AND ADJACENT CABINETS WITHIN THE SAME AREA ALIKE,
AND ALL OTHER INDIVIDUAL COUNTERS TO BE KEYED TO DIFFER. CONFIRM
WITH CLIENT LOCK/ KEY REQUIREMENTS.
8. CABINETS FITTED WITH LAMINATE 3M BRAND RUBBER BUFFERS BETWEEN
ALL CLOSING SURFACES. ADHESIVE APPLIED.
9. CABINET DOOR/ DRAWERS TO BE RECESSED 20mm FROM THE BENCH TOP
FINISHED EDGE.
10. PROVIDE GABLE SPACERS TO CABINETS AT JUNCTION WITH WALLS. ALL
EXPOSED EDGES FINISHED TO MATCH ADJACENT SURFACE.
11. SILCONE SEAL JUNCTION OF BENCH TOP TO WALL WITH APPROVED
SEALANT
12. ALL SELECTED LAMINATES TO BE ON LAMINEX EO BOARD/ SUBSTRATES
(OR EQUAL APPROVED) TO SUIT JOINERY LOCATION & APPLICATION
BB BARREL BOLT
C.O.S CHECK ON SITE
IBW INSTANT BOILING WATER UNIT
BY OTHERS
LKC LOCK (CABINET/ DRAWER)
PTD PAPER TOWEL DISPENSER
MX MIXER
S SINK
SD SOAP DISPENSER
ST STONE
TM TIMBER
LAM LAM
NOM. NOMINAL
UNO UNLESS NOTED OTHERWISE
ABBREVIATED NOTES
1100
750
WALL BEYOND
STONE COUNTER TOP WITH
3 TO 4mm ARRISED EDGE
COUNTERTOP SUPPORT FINS
- CLAM5 COMPACT LAMINATE
GROMMET HOLE
CABLE TRAY
BENCHTOP - CLAM5
JOINERY FRAMING SHOWN
INDICATIVELY ONLY.
PROVIDE SUPPORTS AND
PACKERS TO SUIT
BOX IN DUCT FOR POWER &
DATA RETICULATION TO
AS 3000
350 600
DRAWER CABINETS - JF1
950
350
KWILA SKIRTING IN SINGLE
PIECE
1100
KWILA DADO RAIL
COUNTERTOP, FULL GABLE
FRONT/ ENDS - STONE S4
WALLS NOT DRAWN FOR CLARITY
GABLE SPACER TO END WALL
BENCHTOP - COMPACT
LAMINATE CLAM5
Upper Ground Level www.agarchitects.net.au
3/47 Anderson St mail@agarchitects.net.au
Fortitude Valley Q 4006 ph. (07) 3852 1355
© Copyright AG Architects Brisbane Pty Ltd as
trustee for AG Architects Trust.
Reproduction of the whole or part of this document
constitutes an infringement of copyright.
The information, ideas and concepts contained in this
document are confidential and the recipient
of this document is prohibited from disclosing information,
ideas and concepts to any person
without the prior written consent of AG Architects Pty Ltd.
The Client is licensed to use the documents and drawings
to produce the project for which they were
intended provided that the license applies only to the site to
which the design relates and fees have been
paid to the Architect for the particular stage which he has
been commissioned.
The Architect is not responsible for any discrepancies
occurring on site. All discrepancies shall be reported
to the Architect prior to commencement of any construction
work or shop drawings. This drawing is
not to be scaled for dimensioning purposes. Use figured
dimensions only.
Scale
Drawn by
Date
Project No.
Real Property
Description IssueDrawing No.
Drawing Title.
North Point
Status
Design and Construction: Client:
Site Portion Number 2098
Port Moresby
Lic No: QAC / R61 / 0842
1039
AGA Ref No.
Boroko Food World
Gordons. NCD.
Port Moresby, PNG.
PO Box 222
Boroko Food World
Gordons, NCD.
Documentation:
Phone: +675 3107 470 (PNG)
Fax: +317 38061 688 (AUS)
www.matrix.com.au
60319
The location of existing walls and structure have been provided to AG
Architects by others.
As such AG Architects cannot warrant or verify the accuracy of existing
layout and takes no responsibility for discrepancies in measurements
associated with setout of new work joining into existing elements.
Where setout dimensions of new work are critical in order to join into
existing it is the responsibility of the builder to check and confirm location
& nature of all existing elements prior to setting out; fabrication; and
construction of new works.
All discrepancies between site conditions & those shown on drawings are
to be referred to the architect for further instructions.
As indicated (@ A1)
16/12/20136:29:45PM
1
JOINERY DETAILS - VIP
RECEPTION
Issue Date
LA
1039-A-WD-84.16
CD
POM JACKSON'S INTERNATIONAL
AIRPORT ITB UPGRADE
PORT MORESBY PNG
SCALE: (@ A1)3
L1F-VIP RECEPTION-VIEW 3
SCALE: (@ A1)2
L1F-VIP RECEPTION-VIEW 2
SCALE: (@ A1)4
L1F-VIP RECEPTION- SECTION
SCALE: (@ A1)1
L1F-VIP RECEPTION (VIEW 1)
Issue Description Date By
1 PRELIMINARY ISSUE FOR CLIENT FEEDBACK 13/12/13 NAS
8. F
F
12
84.172
3
84.181
84.18
2
1280 600 350
84.18
3
4
HAND WASH
BASIN WITH
SOAP DISPENSER
& PAPER TOWELS OVER
(NOT SHOWN)
SCULLERY DOUBLE
BOWL SINK
PREP SINK
1.5 BOWL
PREP SPACE
STAINLESS STEEL
ISLAND PREP BENCH
1150x900
FRIDGE
FRIDGE
FREEZER
900 WIDE
COOKTOP.
600 OVEN UNDER
600 WALL OVEN
WITH MICROWAVE
UNDER
MANTOVA
SHELVING
BINS UNDER
STONE SERVERY
HIGH COUNTERTOP
STONE BENCHTOP
7401910
700 1000 900 1008
2349
1150900700
700 1700
BENCHTOP -
JF6 LAMINATE
PREP SINK SCULLERY SINK
3709131200 1200
OVERHEAD
OPEN SHELVES -
JF7 LAMINATE FINISH
320600750150
OPEN
CUPBOARD DOORS
& DRAWER FRONTS -
JF7 LAMINATE FINISH
80 620 300 900
EXHAUST HOOD
BUILT INTO JOINERY
COOKTOP
OVEN
290290150
145145145145150
DRAWERS
SPACE FOR MICROWAVE
OVEN
POT DRAWER
500600
OPEN SHELF
FIXED PANEL
OPEN SHELF
TILED SPLASHBACK
RECESSED KICKBOARD -
JF7 LAMINATE
DISHWASHER
HANDWASH BASIN.
SOAP DISPENSER &
PAPER TOWEL DISPENSER
OVER NOT SHOWN.
SCULLERY SINK
RECESSED KICKBOARD -
JF7 LAMINATE FINISH
700
20580
320600750150 CUPBOARD DOORS -
JF7 LAMINATE FINISH
OPEN
370 12001200
OVERHEAD OPEN
SHELVES - JF7 LAMINATE
FIRE EXTIGUISHER
& FIRE BLANKET
JOINERY NOTES
1. ALL DIMENSIONS ARE TO BE CHECKED ON SITE PRIOR TO CONSTRUCTION.
2. THIS SECTION OF WORK SHALL BE READ IN CONJUNCTION WITH JOINERY
FINISHES; WALL FINISHES; FIXTURES & FITTINGS SCHEDULES.
DESIGN NOTES- VIP KITCHEN & SERVERY
TYPICAL
1. JOINERY / CABINET DOOR HANDLES - REFER TO JOINERY SCHEDULE.
2. SINK/ TAPWARE/ SOAP & PAPER TOWEL DISPENSERS SHOWN INDICATIVELY.
REFER TO FIXTURES AND FINISHES SCHEDULES.
3. LOWER CUPBOARDS TO HAVE ONE ADJUSTABLE SHELF, WHITE MELAMINE
FINISH UNO.
4. BENCHTOPS TO BE SOLID COMPACT LAMINATE, NOM. 18mm THICK. REFER
SCHEDULE FOR COLOUR.
5. CUPBOARDS TO HAVE HAFELE HINGES 90/170 DEGREE OPENING, ALL METAL
SPRUNG FULLY CONCEALED HINGES TO SUIT DOOR WEIGHT AND
CONFIGURATION.
6. DRAWERS FITTED WITH HAFELE FULLY EXTENDABLE HEAVY DUTY SELF
CLOSING RUNNERS, LENGTH TO SUIT CARCASS.
7. LOCKABLE DRAWERS FITTED WITH HAFELE SYMO 3000 LOCKING SYSTEM TO
SUIT DRAWER CONFIGURATION AS NOMINATED. KEY TO BE JOINERY MASTER
KEY SYSTEM DISTINCT TO LOCK SYSTEM, UNO.
8. KEY DRAWERS AND ADJACENT CABINET WITHIN THE SAME AREA ALIKE, AND
ALL OTHER INDIVIDUAL COUNTER TO BE KEYED TO DIFFER. CONFIRM WITH CLIENT
FOR LOCK/ KEY REQUIREMENTS.
9. PROVIDE 3M BRAND RUBBER BUFFERS BETWEEN ALL CLOSING SURFACES.
ADHESIVE APPLIED.
10. KICKBOARDS TO BE 50mm RECESSED FROM FINISHED FACE OF CUPBOARDS.
11. CABINET DOORS/DRAWERS TO BE 20mm RECESSED FROM BENCHTOP
FINISHED EDGE.
12. SILICONE SEAL JUNCTION OF SPLASHBACK TO BENCH TOP, AND
SPLASHBACK TO WALL WITH APPROVED SEALANT .
13. ALL SELECTED LAMINATES TO BE ON LAMINEX EO BOARD/ SUBSTRATES (OR
EQUAL APPROVED) TO SUIT JOINERY LOCATION & APPLICATION.
16. CUPBOARD DOORS AND DRAWER FRONTS TO HAVE ABS MATCHING EDGE
STRIPS.
M
N
TN
Upper Ground Level www.agarchitects.net.au
3/47 Anderson St mail@agarchitects.net.au
Fortitude Valley Q 4006 ph. (07) 3852 1355
© Copyright AG Architects Brisbane Pty Ltd as
trustee for AG Architects Trust.
Reproduction of the whole or part of this document
constitutes an infringement of copyright.
The information, ideas and concepts contained in this
document are confidential and the recipient
of this document is prohibited from disclosing information,
ideas and concepts to any person
without the prior written consent of AG Architects Pty Ltd.
The Client is licensed to use the documents and drawings
to produce the project for which they were
intended provided that the license applies only to the site to
which the design relates and fees have been
paid to the Architect for the particular stage which he has
been commissioned.
The Architect is not responsible for any discrepancies
occurring on site. All discrepancies shall be reported
to the Architect prior to commencement of any construction
work or shop drawings. This drawing is
not to be scaled for dimensioning purposes. Use figured
dimensions only.
Scale
Drawn by
Date
Project No.
Real Property
Description IssueDrawing No.
Drawing Title.
North Point
Status
Design and Construction: Client:
Site Portion Number 2098
Port Moresby
Lic No: QAC / R61 / 0842
1039
AGA Ref No.
Boroko Food World
Gordons. NCD.
Port Moresby, PNG.
PO Box 222
Boroko Food World
Gordons, NCD.
Documentation:
Phone: +675 3107 470 (PNG)
Fax: +317 38061 688 (AUS)
www.matrix.com.au
60319
The location of existing walls and structure have been provided to AG
Architects by others.
As such AG Architects cannot warrant or verify the accuracy of existing
layout and takes no responsibility for discrepancies in measurements
associated with setout of new work joining into existing elements.
Where setout dimensions of new work are critical in order to join into
existing it is the responsibility of the builder to check and confirm location
& nature of all existing elements prior to setting out; fabrication; and
construction of new works.
All discrepancies between site conditions & those shown on drawings are
to be referred to the architect for further instructions.
As indicated (@ A1)
16/12/20136:29:46PM
1
JOINERY DETAILS - VIP
KITCHEN SHEET 1
Issue Date
LA
1039-A-WD-84.17
CD
POM JACKSON'S INTERNATIONAL
AIRPORT ITB UPGRADE
PORT MORESBY PNG
Issue Description Date By
1 PRELIMINARY ISSUE FOR CLIENT FEEDBACK 13/12/13 NAS
SCALE: 1 : 20 (@ A1)1
L1F- VIP KITCHEN
SCALE: 1 : 20 (@ A1)2
L1F- VIP KITCHEN 1
SCALE: 1 : 20 (@ A1)3
L1F- VIP KITCHEN 2
9. STONE COUNTERTOP
& FACING
955145
1100
DADO RAIL FINISHED
AT FACE OF COUNTERTOP
GABLE
KWILA SKIRTING
CONTINUES AROUND
FACE OF SERVERY
BULKHEAD
STONE COUNTERTOP
& GABLE RETURN FACING
KWILA SKIRTING
CONTINUES AROUND
FACE OF SERVERY
BULKHEAD
STONE GABLE RETURN
900
40715145
STONE BENCHTOP
350
120
LAMINATE FACING
145955
STONE COUNTERTOP
& FACING
KWILA SKIRTING
DRAWERS
600
DRAWERS
600
STONE BENCHTOP
8604018020
DRAWERS -
LAMINATE
RECESSED
KICKBOARD
- LAMINATE
GABLE SPACER
BULKHEAD
350 600
2050
FREEZER
BULKHEAD
STONE COUNTERTOP
STONE COUNTERTOP
RETURN GABLE
FRIDGEFRIDGE
KWILA SKIRTING
LAMINATE FACING
STONE BENCHTOP
40860
108020
LAMINATE CARCASS
120
DRAWERS
600
DRAWERS
600
DRAWERS
600
CUTLERY
PLATES
PLATES
Upper Ground Level www.agarchitects.net.au
3/47 Anderson St mail@agarchitects.net.au
Fortitude Valley Q 4006 ph. (07) 3852 1355
© Copyright AG Architects Brisbane Pty Ltd as
trustee for AG Architects Trust.
Reproduction of the whole or part of this document
constitutes an infringement of copyright.
The information, ideas and concepts contained in this
document are confidential and the recipient
of this document is prohibited from disclosing information,
ideas and concepts to any person
without the prior written consent of AG Architects Pty Ltd.
The Client is licensed to use the documents and drawings
to produce the project for which they were
intended provided that the license applies only to the site to
which the design relates and fees have been
paid to the Architect for the particular stage which he has
been commissioned.
The Architect is not responsible for any discrepancies
occurring on site. All discrepancies shall be reported
to the Architect prior to commencement of any construction
work or shop drawings. This drawing is
not to be scaled for dimensioning purposes. Use figured
dimensions only.
Scale
Drawn by
Date
Project No.
Real Property
Description IssueDrawing No.
Drawing Title.
North Point
Status
Design and Construction: Client:
Site Portion Number 2098
Port Moresby
Lic No: QAC / R61 / 0842
1039
AGA Ref No.
Boroko Food World
Gordons. NCD.
Port Moresby, PNG.
PO Box 222
Boroko Food World
Gordons, NCD.
Documentation:
Phone: +675 3107 470 (PNG)
Fax: +317 38061 688 (AUS)
www.matrix.com.au
60319
The location of existing walls and structure have been provided to AG
Architects by others.
As such AG Architects cannot warrant or verify the accuracy of existing
layout and takes no responsibility for discrepancies in measurements
associated with setout of new work joining into existing elements.
Where setout dimensions of new work are critical in order to join into
existing it is the responsibility of the builder to check and confirm location
& nature of all existing elements prior to setting out; fabrication; and
construction of new works.
All discrepancies between site conditions & those shown on drawings are
to be referred to the architect for further instructions.
1 : 20 (@ A1)
16/12/20136:30:16PM
1
JOINERY DETAILS - VIP
KITCHEN SHEET 2
Issue Date
LA
1039-A-WD-84.18
CD
POM JACKSON'S INTERNATIONAL
AIRPORT ITB UPGRADE
PORT MORESBY PNG
SCALE: 1 : 20 (@ A1)1
L1F- VIP KITCHEN SERVERY 1
SCALE: 1 : 20 (@ A1)2
LF1- VIP KITCHEN SERVERY 2
SCALE: 1 : 20 (@ A1)3
L1F- VIP KITCHEN SERVERY 3
SCALE: 1 : 20 (@ A1)4
L1F- VIP KITCHEN
SCALE: (@ A1)5
L1F- VIP KITCHEN VIEW 1
SCALE: (@ A1)6
L1F- VIP KITCHEN VIEW 2
Issue Description Date By
1 PRELIMINARY ISSUE FOR CLIENT FEEDBACK 13/12/13 NAS
10. 3
84.19
40 EQ. EQ. EQ. EQ. 40
300
1100
750
STONE COUNTERTOP
STONE PANEL FACING
KWILA LEDGE
STONE PANEL FACING
KWILA BOTTOM RAIL
LAMINATE KICKBOARD
RETURN SKIRTING
TO FACE OF KICKBOARD
DADO TO FINISH
AT FACE OF GABLE
CLEAR OPENING
84.19 2
350 550 1122
2469
50 350
BUILD OUT
WALL
KWILALEDGE
84.194
ALLOW TO PROVIDE TWO GROMMET
HOLES IN THE BENCHTOP WITH
ADJUSTABLE COVER, NOM. 80mm
DIAMETER, 40mm CLEAR OF ALL EDGES.
COLOUR TO MATCH BENCHTOP.
CONFIRM EXACT LOCATION WITH CLIENT.
- FIT COUNTER & BENCHTOP
NEATLY BETWEEN WALLS
- BENCHTOPS FIXED TO
SUPPORTS FIXED TO FACE
OF WALLS
3
84.19
TAKE SKIRTING TO
FACE OF CARCASS
BENCHTOP -
SELECTED LAMINATE
STONE COUNTERTOP
CARCASS -
SELECTED LAMINATE
OPEN UNDER
350750
3
84.19
BENCHTOP -
LAMINATE FINISH
STONE COUNTERTOP
STONE PANEL FACING
KWILA LEDGE SUPPORTED
ON ANGLES FIXED TO
SUB-STRUCTURE
STONE PANEL FACING
KWILA BOTTOM RAIL
38mm THICK
LAMINATE KICKBOARD
CARCASS -
LAMINATE FINISH
WALL BUILDOUT
IN ELEVATION
COUNTERTOP
1100
BENCHTOP&LEDGE
750
150 350 550
300 600
10 100
Upper Ground Level www.agarchitects.net.au
3/47 Anderson St mail@agarchitects.net.au
Fortitude Valley Q 4006 ph. (07) 3852 1355
© Copyright AG Architects Brisbane Pty Ltd as
trustee for AG Architects Trust.
Reproduction of the whole or part of this document
constitutes an infringement of copyright.
The information, ideas and concepts contained in this
document are confidential and the recipient
of this document is prohibited from disclosing information,
ideas and concepts to any person
without the prior written consent of AG Architects Pty Ltd.
The Client is licensed to use the documents and drawings
to produce the project for which they were
intended provided that the license applies only to the site to
which the design relates and fees have been
paid to the Architect for the particular stage which he has
been commissioned.
The Architect is not responsible for any discrepancies
occurring on site. All discrepancies shall be reported
to the Architect prior to commencement of any construction
work or shop drawings. This drawing is
not to be scaled for dimensioning purposes. Use figured
dimensions only.
Scale
Drawn by
Date
Project No.
Real Property
Description IssueDrawing No.
Drawing Title.
North Point
Status
Design and Construction: Client:
Site Portion Number 2098
Port Moresby
Lic No: QAC / R61 / 0842
1039
AGA Ref No.
Boroko Food World
Gordons. NCD.
Port Moresby, PNG.
PO Box 222
Boroko Food World
Gordons, NCD.
Documentation:
Phone: +675 3107 470 (PNG)
Fax: +317 38061 688 (AUS)
www.matrix.com.au
60319
The location of existing walls and structure have been provided to AG
Architects by others.
As such AG Architects cannot warrant or verify the accuracy of existing
layout and takes no responsibility for discrepancies in measurements
associated with setout of new work joining into existing elements.
Where setout dimensions of new work are critical in order to join into
existing it is the responsibility of the builder to check and confirm location
& nature of all existing elements prior to setting out; fabrication; and
construction of new works.
All discrepancies between site conditions & those shown on drawings are
to be referred to the architect for further instructions.
1 : 20 (@ A1)
16/12/20136:30:17PM
1
JOINERY DETAILS -
PASSPORT CHECK
COUNTER Issue Date
LA
1039-A-WD-84.19
CD
POM JACKSON'S INTERNATIONAL
AIRPORT ITB UPGRADE
PORT MORESBY PNG
Issue Description Date By
1 PRELIMINARY ISSUE FOR CLIENT FEEDBACK 13/12/13 NAS
SCALE: (@ A1)5
L1B- PASSPORT CHECK COUNTER
SCALE: 1 : 20 (@ A1)2
L1B- PASSPORT CHECK COUNTER
SCALE: 1 : 20 (@ A1)1
L1B- PASSPORT CHECK COUNTER
REFER NOTES ON AWD-84.11.
SCALE: 1 : 20 (@ A1)4
L1B- PASSPORT CHECK COUNTER 2
SCALE: 1 : 20 (@ A1)3
L1B- PASSPORT COUNTER
11. 84.20
2
84.20
3
150350550
COUNTERTOP JOINT
1950
COUNTERTOP JOINT
1950
4
84.20
BENCHTOP
JOINT
COUNTERTOP
JOINT
KWILA LEDGE KWILA LEDGE
150
3900 863
1029
- FIT COUNTERS NEATLY
TO WALL
ALLOW TO PROVIDE TWO GROMMET
HOLES TO EACH BENCHTOP
WITH ADJUSTABLE COVERS, NOM.
80mm DIAMETER, 40mm CLEAR OF
ALL EDGES. COLOUR TO MATCH
BENCHTOP. CONFIRM EXACT LOCATION
WITH CLIENT.
4
84.20
KWILA LEDGE KWILA LEDGE
300
750
1100
STONE COUNTERTOPSTONE PANEL FACING
KWILA LEDGE
KWILA BOTTOM RAIL
38 THICK DRESSED
LAMINATE
KICKBOARD
RETURN SKIRTING
TO FACE OF KICKBOARD
RETURN DADO RAIL
TO FACE OF COUNTERTOP
GABLE
4
84.20
750350
150340120120
40 80
10 100
DRAWERS
450
DRAWERS
450
300
BENCHTOP -
SELECTED LAMINATE
STONE COUNTERTOP
CARCASS -
SELECTED LAMINATE
OPEN UNDER
OPEN UNDER
DRAWERS -
SELECTED LAMINATE
RECESSED KICKBOARD
GABLE SPACER
GABLES TO
SUPPORT BENCHTOP
AT EITHER SIDE OF
JOINT
BENCHTOP
GABLE
COUNTERTOP
GABLE
KWILA
BOTTOM RAIL
KICKBOARD
COUNTERTOP
SUPPORT FINS -
LAMINATE FINISH
COUNTERTOP
SUPPORT FINS -
LAMINATE FINISH
BENCHTOP -
LAMINATE FINISH
STONE COUNTERTOP
STONE PANEL FACING
KWILA LEDGE SUPPORTED
ON ANGLES FIXED TO
SUB-STRUCTURE
STONE PANEL FACING
KWILA BOTTOM RAIL
38 THICK DRESSED
LAMINATE KICKBOARD
CARCASS -
LAMINATE FINISH
DRAWERS
150 350 550
BENCHTOP&LEDGE
750
COUNTERTOP
1100
300
10 100 2050
COUNTERTOP
SUPPORT FINS
JOINERY NOTES
1. ALL DIMENSIONS ARE TO BE CHECKED ON SITE PRIOR TO CONSTRUCTION.
2. THIS SECTION OF WORK SHALL BE READ IN CONJUNCTION WITH FIXTURES &
FINISHES SCHEDULES
DESIGN NOTES- SERVICE/ RECEPTION COUNTERS
TYPICAL
1. JOINERY / CABINET DOOR HANDLES - REFER TO JOINERY SCHEDULE.
2. PROVIDE ONE ADJUSTABLE SHELF TO EACH CUPBOARD, WHITE MELAMINE
FINISH UNO.
3. CUPBOARDS TO HAVE HAFELE HINGES 90/170 DEGREE OPENING, ALL
METAL SPRUNG FULLY CONCEALED HINGES TO SUIT DOOR WEIGHT AND
CONFIGURATION.
4. TOP DRAWER FITTED WITH A PENCIL TRAY INSERT.
5. DRAWERS FITTED WITH HAFELE FULLY EXTENDABLE HEAVY DUTY SELF
CLOSING RUNNERS, LENGTH TO SUIT CARCASS.
6. DRAWERS WITH GANG LOCK, HAFELE SYMO 3000 LOCKING SYSTEM TO
SUIT DRAWER CONFIGURATION AS NOMINATED. KEY TO BE JOINERY MASTER
KEY SYSTEM DISTINCT TO LOCK SYSTEM, UNO
7. KEY DRAWERS AND ADJACENT CABINETS WITHIN THE SAME AREA ALIKE,
AND ALL OTHER INDIVIDUAL COUNTERS TO BE KEYED TO DIFFER. CONFIRM
WITH CLIENT LOCK/ KEY REQUIREMENTS.
8. CABINETS FITTED WITH LAMINATE 3M BRAND RUBBER BUFFERS BETWEEN
ALL CLOSING SURFACES. ADHESIVE APPLIED.
9. CABINET DOOR/ DRAWERS TO BE RECESSED 20mm FROM THE BENCH TOP
FINISHED EDGE.
10. PROVIDE GABLE SPACERS TO CABINETS AT JUNCTION WITH WALLS. ALL
EXPOSED EDGES FINISHED TO MATCH ADJACENT SURFACE.
11. SILCONE SEAL JUNCTION OF BENCH TOP TO WALL WITH APPROVED
SEALANT
12. ALL SELECTED LAMINATES TO BE ON LAMINEX EO BOARD/ SUBSTRATES
(OR EQUAL APPROVED) TO SUIT JOINERY LOCATION & APPLICATION
Upper Ground Level www.agarchitects.net.au
3/47 Anderson St mail@agarchitects.net.au
Fortitude Valley Q 4006 ph. (07) 3852 1355
© Copyright AG Architects Brisbane Pty Ltd as
trustee for AG Architects Trust.
Reproduction of the whole or part of this document
constitutes an infringement of copyright.
The information, ideas and concepts contained in this
document are confidential and the recipient
of this document is prohibited from disclosing information,
ideas and concepts to any person
without the prior written consent of AG Architects Pty Ltd.
The Client is licensed to use the documents and drawings
to produce the project for which they were
intended provided that the license applies only to the site to
which the design relates and fees have been
paid to the Architect for the particular stage which he has
been commissioned.
The Architect is not responsible for any discrepancies
occurring on site. All discrepancies shall be reported
to the Architect prior to commencement of any construction
work or shop drawings. This drawing is
not to be scaled for dimensioning purposes. Use figured
dimensions only.
Scale
Drawn by
Date
Project No.
Real Property
Description IssueDrawing No.
Drawing Title.
North Point
Status
Design and Construction: Client:
Site Portion Number 2098
Port Moresby
Lic No: QAC / R61 / 0842
1039
AGA Ref No.
Boroko Food World
Gordons. NCD.
Port Moresby, PNG.
PO Box 222
Boroko Food World
Gordons, NCD.
Documentation:
Phone: +675 3107 470 (PNG)
Fax: +317 38061 688 (AUS)
www.matrix.com.au
60319
The location of existing walls and structure have been provided to AG
Architects by others.
As such AG Architects cannot warrant or verify the accuracy of existing
layout and takes no responsibility for discrepancies in measurements
associated with setout of new work joining into existing elements.
Where setout dimensions of new work are critical in order to join into
existing it is the responsibility of the builder to check and confirm location
& nature of all existing elements prior to setting out; fabrication; and
construction of new works.
All discrepancies between site conditions & those shown on drawings are
to be referred to the architect for further instructions.
As indicated (@ A1)
16/12/20136:30:18PM
1
JOINERY DETAILS -
TRANSFER TICKETING
COUNTER Issue Date
LA
1039-A-WD-84.20
CD
POM JACKSON'S INTERNATIONAL
AIRPORT ITB UPGRADE
PORT MORESBY PNG
SCALE: 1 : 20 (@ A1)1
L1B- TRANSFER TICKETING COUNTER
SCALE: 1 : 20 (@ A1)2
L1B- TRANSFER TICKETING COUNTER
SCALE: 1 : 20 (@ A1)3
L1B- TRANSFER TICKETING COUNTER 2
SCALE: 1 : 20 (@ A1)4
L1B- TRANSFER TICKETING
SCALE: (@ A1)5
L1B- TRANSFER TICKETING COUNTER
SCALE: (@ A1)6
L1B- TRANSFER TICKETING COUNTER 2
Issue Description Date By
1 PRELIMINARY ISSUE FOR CLIENT FEEDBACK 13/12/13 NAS
12. F
EQ. EQ. EQ. EQ.
CONFIRM ON SITE
9890
JOINT SETOUT
400
DADO RAIL FINISHES
AT FACE OF GABLE
DADO RAIL FINISHES
AT FACE OF FASCIA
JOINT JOINT RETURN UPSTAND.
END TO ALIGN WITH
COUNTERTOP EDGE.84.21
2
3
84.21
PB/PF WALL
STONE UPSTAND.
RETURN ON SIDE WALLS
STONE COUNTERTOP
& FASCIA
VINYL FINISH
TO WALL
SKIRTING
150300750
3
84.21
150300750
STONE UPSTAND.
RETURN AT SIDE WALLS.
STONE COUNTERTOP
& FASCIA
SUPPORT STRUCTURE
FIXED TO NOGGING IN
WALL
400
COUNTERTOP
END GABLE
FINISH END OF DADO RAIL
AT FACE OF GABLE
CONTINUE SKIRTING
& VINYL WALL FINISH
COUNTERTOP/FASCIA/
UPSTAND JOINTS TO
ALIGN
FINISH END OF DADO RAIL
AT FACE OF FASCIA
20°
31°
50 50
1150
FRAMING TO SUIT, PROVIDE
BOX IN DUCT FOR POWER
AND DATA RETICULATION
150500
150
100
GROMMET HOLE
200x 20mm REBATE IN FRONT
OF CARCASS BASE FOR
VENTILATION
RECESS PENCIL TRAY
OPEN SHELF UNDER
FOR AUDIO EQUIPMENTS BY OTHERS
FORM SLAB PENETRATION
FOR POWER AND DATA
COUNTER TOP IN NOM. 20 DEGREE
ANGLE
ALLOW UNDER BENCH POWER AND DATA OUTLETS
CLIENT WITH CLIENT FOR EXACT REQUIREMENTS
AUDIO EQUIPMENTS BY OTHERS
500
900
150150
900
1150
50 50
900
OPEN UNDER
Upper Ground Level www.agarchitects.net.au
3/47 Anderson St mail@agarchitects.net.au
Fortitude Valley Q 4006 ph. (07) 3852 1355
© Copyright AG Architects Brisbane Pty Ltd as
trustee for AG Architects Trust.
Reproduction of the whole or part of this document
constitutes an infringement of copyright.
The information, ideas and concepts contained in this
document are confidential and the recipient
of this document is prohibited from disclosing information,
ideas and concepts to any person
without the prior written consent of AG Architects Pty Ltd.
The Client is licensed to use the documents and drawings
to produce the project for which they were
intended provided that the license applies only to the site to
which the design relates and fees have been
paid to the Architect for the particular stage which he has
been commissioned.
The Architect is not responsible for any discrepancies
occurring on site. All discrepancies shall be reported
to the Architect prior to commencement of any construction
work or shop drawings. This drawing is
not to be scaled for dimensioning purposes. Use figured
dimensions only.
Scale
Drawn by
Date
Project No.
Real Property
Description IssueDrawing No.
Drawing Title.
North Point
Status
Design and Construction: Client:
Site Portion Number 2098
Port Moresby
Lic No: QAC / R61 / 0842
1039
AGA Ref No.
Boroko Food World
Gordons. NCD.
Port Moresby, PNG.
PO Box 222
Boroko Food World
Gordons, NCD.
Documentation:
Phone: +675 3107 470 (PNG)
Fax: +317 38061 688 (AUS)
www.matrix.com.au
60319
The location of existing walls and structure have been provided to AG
Architects by others.
As such AG Architects cannot warrant or verify the accuracy of existing
layout and takes no responsibility for discrepancies in measurements
associated with setout of new work joining into existing elements.
Where setout dimensions of new work are critical in order to join into
existing it is the responsibility of the builder to check and confirm location
& nature of all existing elements prior to setting out; fabrication; and
construction of new works.
All discrepancies between site conditions & those shown on drawings are
to be referred to the architect for further instructions.
As indicated (@ A1)
16/12/20136:30:19PM
1
JOINERY DETAILS -
LAGS COUNTER
Issue Date
NAS
1039-A-WD-84.21
CD
POM JACKSON'S INTERNATIONAL
AIRPORT ITB UPGRADE
PORT MORESBY PNG
SCALE: 1 : 50 (@ A1)1
L1E- LAGS COUNTER
SCALE: 1 : 50 (@ A1)2
L1E- LAGS COUNTER
SCALE: 1 : 20 (@ A1)3
L1E- LAGS COUNTER
SCALE: (@ A1)4
L1E- LAGS COUNTER
Issue Description Date By
1 PRELIMINARY ISSUE FOR CLIENT FEEDBACK 13/12/13 NAS
SCALE: (@ A1)8
L1F- VIP LECTERN- VIEW 2SCALE: (@ A1)7
L1F- VIP LECTERN- SIDE ELEVATION
SCALE: (@ A1)9
L1F- VIP LECTERN- VIEW 1
SCALE: (@ A1)5
L1F- VIP LECTERN- PLAN
SCALE: (@ A1)6
L1F- VIP LECTERN-SECTION