1201104167_3
•
0 likes•96 views
This document is a provisional grade sheet for a student named Siddharth Sankar Jena studying Metallurgical Engineering at Government College of Engineering, Keonjhar. It lists the courses taken in Semesters 5 and 6, along with their codes, credits, and grades. In Semester 5, the student's SGPA was 8.88 and in Semester 6 it was 9.38. Their CGPA after Semester 6 was 8.54 and their promotional status is listed as Pass. The grade sheet is dated July 13, 2016 and was issued by the Director of Examinations.
Report
Share
Report
Share
Download to read offline
Recommended
Study of effects of heat treatment on the hardness and microstructure of weld...
This study investigated the effects of annealing heat treatment on the microstructure and mechanical properties of welded low-carbon steel pipes with 0.078% carbon content. Welding was performed on steel pipe samples, followed by heat treating one of the samples at 850°C for 2 hours. Hardness tests and microstructural analysis were conducted on the heat treated and untreated samples. The results showed that the heat treated sample had a lower hardness and a more predominant pearlite structure compared to the untreated sample. This resulted in improved ductility and toughness for the heat treated sample due to carbon diffusion and grain refinement during annealing. Therefore, annealing heat treatment is recommended after welding low-carbon steel to obtain higher ductility properties.
Directional solidification in GDC dies through cooling and heating Design in ...
Directional solidification in GDC dies through cooling and heating Design in ...AnirudhKumarprajapat
1. Improve production by reducing cycle time through cooling channel.
2. Enhancement of mechanical properties.
3. Validation of Experiment with Simulation.
4. Avoid die soldering.
Ley de delitos informáticos
La ley 30096 de Delitos Informáticos tipifica una variedad de delitos cibernéticos como acceso ilícito, fraude informático y suplantación de identidad. Aunque la ley tiene ventajas como sancionar el acoso cibernético, también tiene desventajas como ser imprecisa y poner en riesgo la libertad de expresión. Se debe enseñar a los estudiantes sobre los riesgos en internet y medidas de seguridad para protegerse.
Bas de Vos - SKO @ CMC VoD
Hoe kijkt Nederland televisie? Welke veranderingen in kijkgedrag zijn zichtbaar, en wat zijn de verwachtingen voor de toekomst? Stichting KijkOnderzoek houdt per minuut en per programma bij wat de kijkcijfers zijn, en laat zien welke rol video on demand nu speelt.
Presentatie op het Cross Media Café Video on Demand op 11 oktober 2011.
PWG
This document discusses various social media tools and networking strategies. It covers LinkedIn, Twitter, and QR codes. For LinkedIn, it describes how to create a professional profile, connect with contacts and groups, and find jobs. For Twitter, it discusses how to effectively engage through sharing knowledge, asking questions, and thanking others. QR codes are introduced as a type of two-dimensional barcode that can link to contact information, URLs, and more. The document encourages efficient use of these tools to expand one's network and share information with others.
Recommended
Study of effects of heat treatment on the hardness and microstructure of weld...
This study investigated the effects of annealing heat treatment on the microstructure and mechanical properties of welded low-carbon steel pipes with 0.078% carbon content. Welding was performed on steel pipe samples, followed by heat treating one of the samples at 850°C for 2 hours. Hardness tests and microstructural analysis were conducted on the heat treated and untreated samples. The results showed that the heat treated sample had a lower hardness and a more predominant pearlite structure compared to the untreated sample. This resulted in improved ductility and toughness for the heat treated sample due to carbon diffusion and grain refinement during annealing. Therefore, annealing heat treatment is recommended after welding low-carbon steel to obtain higher ductility properties.
Directional solidification in GDC dies through cooling and heating Design in ...
Directional solidification in GDC dies through cooling and heating Design in ...AnirudhKumarprajapat
1. Improve production by reducing cycle time through cooling channel.
2. Enhancement of mechanical properties.
3. Validation of Experiment with Simulation.
4. Avoid die soldering.
Ley de delitos informáticos
La ley 30096 de Delitos Informáticos tipifica una variedad de delitos cibernéticos como acceso ilícito, fraude informático y suplantación de identidad. Aunque la ley tiene ventajas como sancionar el acoso cibernético, también tiene desventajas como ser imprecisa y poner en riesgo la libertad de expresión. Se debe enseñar a los estudiantes sobre los riesgos en internet y medidas de seguridad para protegerse.
Bas de Vos - SKO @ CMC VoD
Hoe kijkt Nederland televisie? Welke veranderingen in kijkgedrag zijn zichtbaar, en wat zijn de verwachtingen voor de toekomst? Stichting KijkOnderzoek houdt per minuut en per programma bij wat de kijkcijfers zijn, en laat zien welke rol video on demand nu speelt.
Presentatie op het Cross Media Café Video on Demand op 11 oktober 2011.
PWG
This document discusses various social media tools and networking strategies. It covers LinkedIn, Twitter, and QR codes. For LinkedIn, it describes how to create a professional profile, connect with contacts and groups, and find jobs. For Twitter, it discusses how to effectively engage through sharing knowledge, asking questions, and thanking others. QR codes are introduced as a type of two-dimensional barcode that can link to contact information, URLs, and more. The document encourages efficient use of these tools to expand one's network and share information with others.
SPSCPT - Francois Pienaar
In this presentation I discussed how SharePoint architecture needs to be considered while planning your governance. I also discussed the role of people and technology in the overall governance planning.
Basic Mechatronics - 12 days
The 12-day training program covers basic mechatronics including mechanical, pneumatic, electrical, and PLC assembly. Trainees will learn mechanical skills like reading drawings, measuring tolerances, and assembling techniques. They will also learn about pneumatic components, drawing pneumatic circuits, and assembling a pneumatic press. The electrical portion will cover components, sensors, actuators, and wiring. PLC training includes programming languages, hardware configuration, addressing, memory concepts, and creating a logic program to control the pneumatic press. The course is intended for diploma or degree students in engineering fields.
Transcripts and PC
This certificate certifies that Shri Padwalakshay Vilas was a bona fide student at Sardar Patel College of Engineering from 2012-2013 to 2015-2016 studying Mechanical Engineering. His elective subjects were Computational Fluid Dynamics and Supply Chain Management. His project was the Design & Fabrication of a Flexural Based Linear Guideway for a Micro Drilling Workstation. He passed his final year BTech exam in May 2016. The transcript outlines the course structure and credits for subjects completed each semester.
Il foglio elettronico a supporto dell’attività professionale [AP03-S]
Il seminario presenta le funzionalità e le modalità di utilizzo del foglio elettronico (MS Excel e/o Calc Open Office) quale strumento di supporto per l’attività professionale. Il seminario, dopo una fase introduttiva, dedicata agli utenti che non hanno conoscenza pratica del foglio elettronico, entra nel dettaglio dei principali comandi di calcolo ed elaborazione dati. La funzionalità avanzate sono presentate con il supporto di esempi pratici di elaborazione e rappresentazione con l’utilizzo di tabelle pivot e grafici.
Os Quatro Evangelhos - Volume 2, J.-B. Roustaing
Jesus ensina que devemos orar com fé, perseverança e humildade, pois Deus, em sua bondade infinita, atenderá nossas preces. Ele compara Deus a um pai amoroso que, apesar de nossas imperfeições, sempre nos dará o que precisamos com maior razão do que pais humanos dão a seus filhos.
Historia natural sarampion
El documento describe las etapas del sarampión, incluyendo el período prepatogénico, patogénico, postpatogénico, prevención primaria, secundaria y terciaria. El sarampión es causado por un virus que infecta principalmente a niños menores de 10 años y se transmite a través de gotas respiratorias. Los síntomas incluyen fiebre, tos, erupción cutánea y puede complicarse con neumonía u otras infecciones. La prevención se logra a través de programas de vacunación masiva.
Hemophilia a
This document provides information about hemophilia, including its causes, types, clinical manifestations, diagnosis, treatment, and management. Key points include:
- Hemophilia is an inherited bleeding disorder caused by deficiencies in coagulation factors VIII or IX. It is passed down in an X-linked recessive pattern.
- There are two main types: hemophilia A caused by factor VIII deficiency, and hemophilia B caused by factor IX deficiency.
- Bleeding can occur spontaneously or after injury in joints, muscles or other tissues. Diagnosis is made through family history and coagulation factor assays.
- Treatment involves replacement of the missing clotting factor, usually through intravenous infusions of
1201104167_4
This document is a grade sheet for a student named Siddharth Sankar Jena studying metallurgical engineering. It lists the courses he was registered for in his 7th and 8th semesters, along with the credits and grades for each course. His semester grade point averages for semesters 7 and 8 were 9.04 and 9.09 respectively, and his cumulative grade point average after semester 8 was 8.66. He has passed and is eligible for promotion to the next level of his program.
1201104167_2
This document is a grade sheet for a student named Siddharth Sankar Jena studying Metallurgical Engineering. It lists the courses taken in Semesters 3 and 4, along with their credits and grades. In Semester 3, his SGPA was 8.30. In Semester 4, his SGPA was 8.04 and his CGPA was 8.28. He has passed and is eligible for promotion to the next semester.
1321317174_3
This document is a grade sheet for a student named Bhabani Sankar Jena studying Mechanical Engineering at Gandhi Institute of Science and Technology, Rayagada. It lists the courses taken in semesters 5 and 6, along with their codes, credits, and grades. In semester 5, the student's SGPA was 6.88. In semester 6, the SGPA was 8.42 and the CGPA was 7.30. The student has passed and is eligible for promotion to the next semester.
1321317174_4
This document is a grade sheet for a student named Bhabani Sankar Jena studying Mechanical Engineering at Gandhi Institute of Science and Technology, Rayagada. It lists the courses taken in the 7th and 8th semesters, along with their credits and grades. In the 7th semester, the student received grades ranging from A to C, and obtained an SGPA of 7.64. In the 8th semester, grades ranged from B to O, and the student's SGPA was 8.50. Their overall CGPA after the 8th semester was 7.53, and their promotional status was listed as Pass.
1201104167_1
This document is a grade sheet for a student named Siddharth Sankar Jena studying Metallurgical Engineering at Government College of Engineering, Keonjhar. It lists the courses taken in the first two semesters, including subjects like Basic Electrical Engineering, Mechanics, Programming in C, and Mathematics. It provides the course codes, credits, and grades for each subject. It also includes the student's semester grade point averages (SGPA) and cumulative grade point average (CGPA) after the first two semesters, indicating a pass promotional status.
1201216185_2
This document is a grade sheet for a student named Krishna Nanda studying electronics and telecommunication engineering. It lists the courses taken in semesters 3 and 4, including subjects, codes, credits, and grades. In semester 3, the student received grades in subjects like network theory, mathematics, material science, and analog electronics circuits. In semester 4, subjects included C++ programming, energy conversion devices, physics of semiconductors, and digital electronics circuits. The student's semester 4 SGPA was 8.18 and CGPA was 7.34, with a promotional status of pass.
1321317174_2
This document is a provisional grade sheet for a student named Bhabani Sankar Jena studying Bachelor of Technology in Mechanical Engineering at Gandhi Institute of Science and Technology, Rayagada. It lists the courses taken in the 3rd and 4th semesters, along with their codes, credits, and grades. In the 3rd semester, the student's SGPA was 6.93 and in the 4th semester the SGPA was 7.04, with an overall CGPA of 6.98 after 4 semesters. The student has passed and is eligible for promotion to the next semester.
1201219287_2
This document is a provisional grade sheet for a student named Bipin Kumar studying Electronics and Telecommunication Engineering. It lists the courses taken in semesters 3 and 4, including course codes, credits, and grades obtained. In semester 3, the student achieved an SGPA of 7.26 and in semester 4, an SGPA of 6.93. The student's CGPA after semester 4 is 7.06 and their promotional status is listed as pass.
1201216185_3
This document is a provisional grade sheet for a student named Krishna Nanda enrolled in the Electronics and Telecommunication Engineering program at Padmanava College of Engineering, Rourkela. It lists the courses taken in semesters 5 and 6, along with their credits and grades. In semester 5, the student received grades in 8 subjects and 3 laboratories. In semester 6, the student received grades in 8 subjects and 3 laboratories. The student's SGPA for semester 6 was 8.88 and CGPA for semester 6 was 7.82. The student's promotional status is listed as pass.
1201219287_3
This document is a provisional grade sheet for a student named Bipin Kumar studying Electronics and Telecommunication Engineering. It lists the courses taken in the 5th and 6th semesters, along with their credit hours and grades. In the 5th semester, the student's SGPA was 7.36. In the 6th semester, the SGPA was 7.83, and the CGPA for all semesters completed so far was 7.23. The student has passed and is eligible for promotion to the next semester.
Crv
Manjunath Kumbe K.S. has applied for the March 2015 examination through Visvesvaraya Technological University. He is a 4th semester BE student in Mechanical Engineering at Sri Revana Siddeshwara Institute of Technology in Bangalore. He has applied for 7 subjects - 4 regular subjects, 3 arrear subjects from previous semesters, and has paid an application fee of Rs. 1,150. The form contains his personal details, college details, subjects applied for, and payment details.
1201216185_1
This document is a provisional grade sheet for a student named Krishna Nanda enrolled in the B.Tech Electronics and Telecommunication Engineering program at Padmanava College of Engineering, Rourkela under Biju Patnaik University of Technology, Odisha. It lists the courses taken in the first two semesters, including subjects like Basic Electronics, Thermodynamics, Programming in C, along with their corresponding credits and grades. The sheet shows the student's SGPA and CGPA for the second semester as 6.93 and 6.80 respectively, with a promotional status of pass.
Academic Transcript
This document contains a student's academic record from the School of Mechanical Engineering at USM. It includes the student's personal information, examination results, academic status over 8 semesters, lists of courses taken each semester, and final cumulative units. The student graduated with a CGPA of 3.76, maintaining an A academic status throughout their studies and completing 139 cumulative units, fulfilling the 135 units required for graduation in the Mechanical Engineering program.
More Related Content
Viewers also liked
SPSCPT - Francois Pienaar
In this presentation I discussed how SharePoint architecture needs to be considered while planning your governance. I also discussed the role of people and technology in the overall governance planning.
Basic Mechatronics - 12 days
The 12-day training program covers basic mechatronics including mechanical, pneumatic, electrical, and PLC assembly. Trainees will learn mechanical skills like reading drawings, measuring tolerances, and assembling techniques. They will also learn about pneumatic components, drawing pneumatic circuits, and assembling a pneumatic press. The electrical portion will cover components, sensors, actuators, and wiring. PLC training includes programming languages, hardware configuration, addressing, memory concepts, and creating a logic program to control the pneumatic press. The course is intended for diploma or degree students in engineering fields.
Transcripts and PC
This certificate certifies that Shri Padwalakshay Vilas was a bona fide student at Sardar Patel College of Engineering from 2012-2013 to 2015-2016 studying Mechanical Engineering. His elective subjects were Computational Fluid Dynamics and Supply Chain Management. His project was the Design & Fabrication of a Flexural Based Linear Guideway for a Micro Drilling Workstation. He passed his final year BTech exam in May 2016. The transcript outlines the course structure and credits for subjects completed each semester.
Il foglio elettronico a supporto dell’attività professionale [AP03-S]
Il seminario presenta le funzionalità e le modalità di utilizzo del foglio elettronico (MS Excel e/o Calc Open Office) quale strumento di supporto per l’attività professionale. Il seminario, dopo una fase introduttiva, dedicata agli utenti che non hanno conoscenza pratica del foglio elettronico, entra nel dettaglio dei principali comandi di calcolo ed elaborazione dati. La funzionalità avanzate sono presentate con il supporto di esempi pratici di elaborazione e rappresentazione con l’utilizzo di tabelle pivot e grafici.
Os Quatro Evangelhos - Volume 2, J.-B. Roustaing
Jesus ensina que devemos orar com fé, perseverança e humildade, pois Deus, em sua bondade infinita, atenderá nossas preces. Ele compara Deus a um pai amoroso que, apesar de nossas imperfeições, sempre nos dará o que precisamos com maior razão do que pais humanos dão a seus filhos.
Historia natural sarampion
El documento describe las etapas del sarampión, incluyendo el período prepatogénico, patogénico, postpatogénico, prevención primaria, secundaria y terciaria. El sarampión es causado por un virus que infecta principalmente a niños menores de 10 años y se transmite a través de gotas respiratorias. Los síntomas incluyen fiebre, tos, erupción cutánea y puede complicarse con neumonía u otras infecciones. La prevención se logra a través de programas de vacunación masiva.
Hemophilia a
This document provides information about hemophilia, including its causes, types, clinical manifestations, diagnosis, treatment, and management. Key points include:
- Hemophilia is an inherited bleeding disorder caused by deficiencies in coagulation factors VIII or IX. It is passed down in an X-linked recessive pattern.
- There are two main types: hemophilia A caused by factor VIII deficiency, and hemophilia B caused by factor IX deficiency.
- Bleeding can occur spontaneously or after injury in joints, muscles or other tissues. Diagnosis is made through family history and coagulation factor assays.
- Treatment involves replacement of the missing clotting factor, usually through intravenous infusions of
Viewers also liked (9)
Il foglio elettronico a supporto dell’attività professionale [AP03-S]
Il foglio elettronico a supporto dell’attività professionale [AP03-S]
Similar to 1201104167_3
1201104167_4
This document is a grade sheet for a student named Siddharth Sankar Jena studying metallurgical engineering. It lists the courses he was registered for in his 7th and 8th semesters, along with the credits and grades for each course. His semester grade point averages for semesters 7 and 8 were 9.04 and 9.09 respectively, and his cumulative grade point average after semester 8 was 8.66. He has passed and is eligible for promotion to the next level of his program.
1201104167_2
This document is a grade sheet for a student named Siddharth Sankar Jena studying Metallurgical Engineering. It lists the courses taken in Semesters 3 and 4, along with their credits and grades. In Semester 3, his SGPA was 8.30. In Semester 4, his SGPA was 8.04 and his CGPA was 8.28. He has passed and is eligible for promotion to the next semester.
1321317174_3
This document is a grade sheet for a student named Bhabani Sankar Jena studying Mechanical Engineering at Gandhi Institute of Science and Technology, Rayagada. It lists the courses taken in semesters 5 and 6, along with their codes, credits, and grades. In semester 5, the student's SGPA was 6.88. In semester 6, the SGPA was 8.42 and the CGPA was 7.30. The student has passed and is eligible for promotion to the next semester.
1321317174_4
This document is a grade sheet for a student named Bhabani Sankar Jena studying Mechanical Engineering at Gandhi Institute of Science and Technology, Rayagada. It lists the courses taken in the 7th and 8th semesters, along with their credits and grades. In the 7th semester, the student received grades ranging from A to C, and obtained an SGPA of 7.64. In the 8th semester, grades ranged from B to O, and the student's SGPA was 8.50. Their overall CGPA after the 8th semester was 7.53, and their promotional status was listed as Pass.
1201104167_1
This document is a grade sheet for a student named Siddharth Sankar Jena studying Metallurgical Engineering at Government College of Engineering, Keonjhar. It lists the courses taken in the first two semesters, including subjects like Basic Electrical Engineering, Mechanics, Programming in C, and Mathematics. It provides the course codes, credits, and grades for each subject. It also includes the student's semester grade point averages (SGPA) and cumulative grade point average (CGPA) after the first two semesters, indicating a pass promotional status.
1201216185_2
This document is a grade sheet for a student named Krishna Nanda studying electronics and telecommunication engineering. It lists the courses taken in semesters 3 and 4, including subjects, codes, credits, and grades. In semester 3, the student received grades in subjects like network theory, mathematics, material science, and analog electronics circuits. In semester 4, subjects included C++ programming, energy conversion devices, physics of semiconductors, and digital electronics circuits. The student's semester 4 SGPA was 8.18 and CGPA was 7.34, with a promotional status of pass.
1321317174_2
This document is a provisional grade sheet for a student named Bhabani Sankar Jena studying Bachelor of Technology in Mechanical Engineering at Gandhi Institute of Science and Technology, Rayagada. It lists the courses taken in the 3rd and 4th semesters, along with their codes, credits, and grades. In the 3rd semester, the student's SGPA was 6.93 and in the 4th semester the SGPA was 7.04, with an overall CGPA of 6.98 after 4 semesters. The student has passed and is eligible for promotion to the next semester.
1201219287_2
This document is a provisional grade sheet for a student named Bipin Kumar studying Electronics and Telecommunication Engineering. It lists the courses taken in semesters 3 and 4, including course codes, credits, and grades obtained. In semester 3, the student achieved an SGPA of 7.26 and in semester 4, an SGPA of 6.93. The student's CGPA after semester 4 is 7.06 and their promotional status is listed as pass.
1201216185_3
This document is a provisional grade sheet for a student named Krishna Nanda enrolled in the Electronics and Telecommunication Engineering program at Padmanava College of Engineering, Rourkela. It lists the courses taken in semesters 5 and 6, along with their credits and grades. In semester 5, the student received grades in 8 subjects and 3 laboratories. In semester 6, the student received grades in 8 subjects and 3 laboratories. The student's SGPA for semester 6 was 8.88 and CGPA for semester 6 was 7.82. The student's promotional status is listed as pass.
1201219287_3
This document is a provisional grade sheet for a student named Bipin Kumar studying Electronics and Telecommunication Engineering. It lists the courses taken in the 5th and 6th semesters, along with their credit hours and grades. In the 5th semester, the student's SGPA was 7.36. In the 6th semester, the SGPA was 7.83, and the CGPA for all semesters completed so far was 7.23. The student has passed and is eligible for promotion to the next semester.
Crv
Manjunath Kumbe K.S. has applied for the March 2015 examination through Visvesvaraya Technological University. He is a 4th semester BE student in Mechanical Engineering at Sri Revana Siddeshwara Institute of Technology in Bangalore. He has applied for 7 subjects - 4 regular subjects, 3 arrear subjects from previous semesters, and has paid an application fee of Rs. 1,150. The form contains his personal details, college details, subjects applied for, and payment details.
1201216185_1
This document is a provisional grade sheet for a student named Krishna Nanda enrolled in the B.Tech Electronics and Telecommunication Engineering program at Padmanava College of Engineering, Rourkela under Biju Patnaik University of Technology, Odisha. It lists the courses taken in the first two semesters, including subjects like Basic Electronics, Thermodynamics, Programming in C, along with their corresponding credits and grades. The sheet shows the student's SGPA and CGPA for the second semester as 6.93 and 6.80 respectively, with a promotional status of pass.
Academic Transcript
This document contains a student's academic record from the School of Mechanical Engineering at USM. It includes the student's personal information, examination results, academic status over 8 semesters, lists of courses taken each semester, and final cumulative units. The student graduated with a CGPA of 3.76, maintaining an A academic status throughout their studies and completing 139 cumulative units, fulfilling the 135 units required for graduation in the Mechanical Engineering program.
1201288152_1
This document is a grade sheet for a student named Vikash Kumar studying Electronics and Communication Engineering at NM Institute of Engineering & Technology, Bhubaneswar. It lists the courses he was registered for in the first and second semesters, along with their codes, credits, and grades. In the first semester, his SGPA was 7.82 and in the second semester his SGPA was 7.75, giving him a CGPA of 7.79 after the second semester and a promotional status of pass. The grade sheet was issued on July 20, 2016.
EMM COURSE FILE UPDATED.docx
This document outlines the course content, outcomes, syllabus, assessment, and student list for the Engineering Metallurgy course at Mar Ephraem College of Engineering and Technology. The course is divided into 5 units covering alloy and phase diagrams, heat treatment, ferrous and non-ferrous metals, non-metallic materials, and mechanical properties testing. Assessment includes two continuous exams, assignments, a model exam, and an end of semester exam. The course aims to explain key metallurgical concepts and their applications in engineering. A list of 121 students enrolled in the course is also provided.
Mechanical 2017
This document outlines the curriculum for a Bachelor of Mechanical Engineering program following a Choice Based Credit System. It details the program educational objectives, which aim to develop students' career skills, expertise in design, materials and manufacturing, ability to contribute to technological development, and professional skills. It also lists the program outcomes related to applying engineering principles, problem-solving, experimentation, design, tools/software use, ethics, communication, adaptability, and lifelong learning. Finally, it provides the course requirements for each semester, mapping the courses to the program outcomes.
Struktur kurikulum-s1-teknik-metalurgi-dan-material
This document outlines the curriculum structure for the Bachelor of Engineering in Metallurgical and Materials Engineering program. It includes:
- The courses required in each of the 8 semesters, including course codes, names, and credit hours. Core courses cover topics like calculus, physics, chemistry, materials characterization, physical metallurgy, and materials processing.
- A list of elective courses that can be chosen from, related to specialized topics in metallurgy, polymers, corrosion, nano-materials and more.
- Detailed course descriptions for some core first year courses to outline the topics and concepts covered in courses like engineering drawing, introduction to materials, physical metallurgy 1, and
3. b.e. mech
This document outlines the curriculum and syllabus for a Bachelor of Mechanical Engineering program following a Choice Based Credit System. It includes the program educational objectives, which are to prepare graduates for careers in mechanical engineering and related fields, develop expertise in key areas like design, manufacturing, and materials, contribute to technological development, and engage in lifelong learning. It also lists the program outcomes, which include abilities in areas such as problem solving, design, experimentation, communication, and professional and ethical responsibility. The document then outlines the various courses over 8 semesters, mapping them to the program outcomes and categorizing them as theory, practical, etc. It provides details of 184 total credits required to earn the degree.
3. B.E. Mech .pdf
This document outlines the curriculum for a Bachelor of Mechanical Engineering program following a Choice Based Credit System. It details the program educational objectives, which aim to develop students' career skills, expertise in design/manufacturing, ability to contribute to technological development, professional skills, and capacity for lifelong learning. The program outcomes are also listed, focusing on developing various engineering abilities. The curriculum spans 8 semesters and includes courses in mathematics, science, humanities, engineering fundamentals, and mechanical engineering specializations. Course details such as category, contact hours, and credits are provided semester-by-semester.
EDM-MRR Improvement Part-2 (Sem-8)
This document is a project report submitted to Gujarat Technological University that experimentally studies the effect of process parameters on the performance of electric discharge machining (EDM). The report was submitted by four students for their Project-II subject under the guidance of an assistant professor. The report details the experimental setup used, methodology, results and analysis of the experiment conducted to determine the optimal process parameters for improving the material removal rate in EDM.
Similar to 1201104167_3 (20)
Struktur kurikulum-s1-teknik-metalurgi-dan-material
Struktur kurikulum-s1-teknik-metalurgi-dan-material
1201104167_3
- 1. BIJU PATNAIK UNIVERSITY OF TECHNOLOGY, ODISHA ROURKELA PROVISIONAL GRADE SHEET Regd. No. 1201104167 Name SIDDHARTH SANKAR JENA Course/ Branch GOVERNMENT COLLEGE OF ENGINEERING, KEONJHARCollege B.Tech.(METALLURGICAL ENGINEERING) : : : : Subjects RegistredSubject Code Semester: SE 5 Credit Grade OPTIMIZATION IN ENGINEERING 3 EHSSM3302 PHASE TRANSFORMATION AND HEAT TREATMENT 3 EPCMT4301 DEFORMATION BEHAVIOUR OF MATERIALS 3 APCMT4302 PHASE TRANSFORMATION AND HEAT TREATMENT LABORATORY 2 OPCMT7301 MINERAL PROCESSING LABORATORY 2 OPCMT7302 FUEL TESTING LABORATORY 2 OPCMT7303 FIBER OPTICS AND OPTOELECTRONICS DEVICES 3 APEEC4302 FUEL TECHNOLOGY 3 EPEMN5301 MINERAL PROCESSING 3 APEMT5302 Subjects RegistredSubject Code Semester: SE 6 Credit Grade PRINCIPLES OF MANAGEMENT 3 EHSSM3301 IRON MAKING 3 EPCMT4303 MECHANICAL WORKING AND TESTING OF MATERIALS 3 EPCMT4304 SOLIDIFICATION AND CASTING 3 EPCMT4305 TESTING OF MATERIALS LABORATORY 2 OPCMT7304 PROCES METALLURGY LABORATORY 2 OPCMT7305 COMPUTER APPLICATIONS IN METALLURGYCAL ENGINEERING LABORATORY 2 OPCMT7306 NON CONVENTIONAL ENERGY SOURCES 3 EPEME5308 COMPOSITE MATERIALS 3 OPEMT5305 SGPA(SE5): 8.88 SGPA(SE6): 9.38 CGPA(SE6): 8.54Promotional Status: Pass Date :13-07-2016 Director, Examinations