1. Technical Specification
Capri ADE 1F2 - for Non-armoured Cable
Suitable for the following cable types
Non-armoured cable
Marine shipboard cable; Type P cable
Certifications and Compliances
Zones 1 and 2, Groups IIA, IIB and IIC
Zones 21 and 22, Groups IIIA, IIIB and IIIC
ATEX Certificate No.: INERIS12ATEX0032X
Ex db IIC, Ex db I, Ex eb I, Ex eb IIC, Ex nRc IIC, Ex tb IIIC
IECEx Certificate No.: IECEx INE 12.0025X
Class I, Zone 1, AEx e II*
Class I, Zone 2, AEx e II, Ex e II
cULus Listed: E310130
Marine cULus Listed: E314047
*ADE sizes 3-8, 1/2” to 1 1/4” NPT or ISO 20 to 40
with TC-ER-HL unarmoured cable up to 1” diameter
DTS-01:91 Deluge Certification
Product Specification
Material:
Nickel-plated brass for superior corrosion resistance.
316 stainless steel, bronze and aluminum options available.
It is recommended that a suitable lubricant is used on all
threads of stainless steel and aluminum versions.
Operating Temperature:
• Neoprene seal: -30°C to +80°C
• Silicone seal: -60°C to +140°C
Ingress Protection (IP)
Metric Threads:
Fitted on equipment with a flat surface, on threaded hole or
on blank hole (“d” use excluded) fixed by a qualified locknut
with all threads engaged:
• IP64 and IP66 without sealing washer and surface finish
of Ra 0.4μm or on threaded hole and surface finish of
Ra 1.6μm max.
• IP64 and IP66 with all sealing washers (red fiber,
green fiber, neoprene, nylon or PTFE) on surface
Ra 6.3μm max.
• IP68 tested 30m/7days with red fiber or green fiber
sealing washers on surface Ra 6.3μm max.
NPT Threads:
• IP64, IP66 and IP68 tested 30m/7days, always fitted
on equipment with threaded hole; HTL lubricant may be
needed.
Clamping Technology
Elastomeric seal on cable outer sheath.
External cable clamping module (optional).
1: Specifically formulated elastomer for IP sealing on outer sheath
of cable.
2: Additional external cable clamping for strain relief (optional).
Features & Benefits
1
2
14 EATON’S CROUSE-HINDS Cable Glands Global Solutions Catalog
3. KIT
CODE
KIT
OPTION
OPTION
CODE
Kit 1 Contents:
K1 • Locknut
• Green Fiber Washer
Kit 2 Contents:
• Locknut
K2 • Green Fiber Washer
• Earth Tag
• Shroud
Kit 3 Contents:
• Locknut
K3 • Green Fiber Washer
• Earth Tag
• Serrated Washer
Ordering Using ADE Catalog Numbers
Ordering Using CAP Material Codes
For material options, replace the last digit of the gland CAP
code before the ‘V1’ suffix; for example:
CAP806694V1 = ADE 1F2 M20 Size 5 Nickel-plated Brass
with Neoprene Seal
Change the digit before the ‘V1’ suffix:
CAP806699V1 = ADE 1F2 M20 Size 5 Stainless Steel with
Neoprene Seal
*Compound glands (ADE 1FC & 6FC) not available in
aluminum.
CAP NUMBER MATERIAL CODES
ORDERING EXAMPLE
GLAND TYPE
CAP80669 4 V1
OPTION
4 Nickel-plated Brass with Neoprene Seal
5 Nickel-plated Brass with Silicone Seal
6 Stainless Steel with Silicone Seal
7 *Aluminum (on demand)
8 Bronze (on demand)
9 Stainless Steel with Neoprene Seal
ADE
MODEL
SERIES
CODE
ADE1 ADE 1F2
ADE2 ADE 1F2 DS
ADE1A ADE 1F2
(with integral
clamping module)
ADE1C ADE 1FC
ADE4 ADE 4F
ADE5 ADE 5F
ADE6 ADE 6F
ADE6C ADE 6FC
CABLE
SEALING
RANGE
RANGE
CODE
0 Extra Small (XS)
1 Small (S)
2 Medium (M)
3 Large (L) SEALING
TYPE
SEALING
CODE
N Neoprene
S Silicone
MATERIAL
(Gland body)
MATERIAL
CODE
NP Nickel-plated
brass
SS Stainless Steel
BZ Bronze
AL Aluminum
BARRIER TYPE
(ADE 1FC/6FC
only)
BARRIER
CODE
SC Solid Compound
Notes:
• The ‘barrier’ section of the codes should only be used for ADE 1FC and ADE 6FC models
• Not all options are available for all models; please check individual models for details
If orders are placed using the ‘CAP’ numbers or converting
from/to catalog (ADE) numbers, please ensure you have the
correct digit for the material required. Consult the CAP
Ordering Example for details.
OPTION
K1 Accessories Kit 1
K2 Accessories Kit 2
K3 Accessories Kit 3
FL Flange (Intergrated
Clamping)
BLANK No Option
CABLE
SEALING
RANGE
SERIES
ADE2 M25 3 NP N
OPTIONMATERIALTHREAD
SIZE
SEALING
TYPE
Variant codes & options
39EATON’S CROUSE-HINDS Capri ADE Cable Glands and Accessories