Kalikund Steel & Engineering Company manufactures and supplies various types of outlet fittings in stainless steel, carbon steel, and alloy steel. These include sweep outlets, 90 degree outlets, nipple outlets, threading outlets, welding outlets, and socket weld outlets. The materials used meet standards for forgings and seamless tubular products according to specifications. Kalikund Steel is a manufacturer, supplier, and exporter of high quality sweep outlets and socket weld outlets.

1. Introduction
Kalikund Steel & Engineering Company(KSEC) is one of the reputed
manufacturers, Suppliers, Exporters and Stockist for Outlets Fittings in Stainless
Steel, Carbon Steel, Alloy Steel and High Nickel Steel like Welding Outlets,
Threading Outlets, Socket weld Outlets, Nipple Outlets, Sweep Outlets, 45 Deg
Outlets, 90 Deg Outlets etc.
INTEGRALLY REINFORCED FORGED
BRANCH OUTLETS FITTINGS – SOCKET
WELDING, THREADING & BUTTWELDING
ENDS. MSS-SP-97 Standard Practice
covers essential dimensions, finish,
tolerances, testing, marking, material
and minimum strength requirements

2. Material for the fittings under this standard practice, Shall consist of the
forging, bar and seamless tubular products. The material shall conforms to the
requirement of the WP Grade seamless construction materials in ASTM Fittings
specification A234/A234M, A403/A403M, A420/A420m, or A815/A815M; or
the ASTM Forgings Specifications A105/A105M, A182/A182M, or A350/A350M
and other related standards.

3. Sweep Outlets
90 Deg Outlets
Nipple Outlets
Threading Outlets
Welding Outlets
Socket Weld Outlets
45 Deg Outlets

4. Kalikund Steel is Manufacturer,
Supplier & Exporter of high quality
Sweep Outlets. Sweep outlets is a
contoured, integrally reinforced, butt-
weld branch connection with a low stress
intensification factor
low stresses and long fatigue life. The attachment weld is easily examined by
radiography, ultrasound and other standard non-destructive techniques.
Manufactured to meet your specific reinforcement requirements.

5. Kalikund Steel is Manufacturer, Supplier
& Exporter of high quality Socket Weld
Outlets. Socket weld outlet utilizes the
basic Welding Outlet however the branch
affixes by way of a socket inside the olet.
The bore matches the outlet bore, and
the existence of a counter bore roughly
the size of the OD of the outlet provides a
socket where the pipe can sit, facilitating
installation and welding. The Socket weld
outlet is considered a socket fitting, and
manufactured in 3000#, 6000# and 9000#
classes.

6. Visit:http://www.branchconnections.com